blob: 73b52f17ea848d6de2a650afa583052088a79f76 [file] [log] [blame]
Eilon Greensteind05c26c2009-01-17 23:26:13 -08001/* Copyright 2008-2009 Broadcom Corporation
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002 *
3 * Unless you and Broadcom execute a separate written software license
4 * agreement governing use of this software, this software is licensed to you
5 * under the terms of the GNU General Public License version 2, available
6 * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
7 *
8 * Notwithstanding the above, under no circumstances may you combine this
9 * software in any way with any other Broadcom software provided under a
10 * license other than the GPL, without Broadcom's express prior written
11 * consent.
12 *
13 * Written by Yaniv Rosner
14 *
15 */
16
17#include <linux/kernel.h>
18#include <linux/errno.h>
19#include <linux/pci.h>
20#include <linux/netdevice.h>
21#include <linux/delay.h>
22#include <linux/ethtool.h>
23#include <linux/mutex.h>
Yaniv Rosnerea4e0402008-06-23 20:27:26 -070024
Yaniv Rosnerea4e0402008-06-23 20:27:26 -070025#include "bnx2x.h"
26
27/********************************************************/
Eilon Greenstein3196a882008-08-13 15:58:49 -070028#define ETH_HLEN 14
Yaniv Rosnerea4e0402008-06-23 20:27:26 -070029#define ETH_OVREHEAD (ETH_HLEN + 8)/* 8 for CRC + VLAN*/
30#define ETH_MIN_PACKET_SIZE 60
31#define ETH_MAX_PACKET_SIZE 1500
32#define ETH_MAX_JUMBO_PACKET_SIZE 9600
33#define MDIO_ACCESS_TIMEOUT 1000
34#define BMAC_CONTROL_RX_ENABLE 2
Yaniv Rosnerea4e0402008-06-23 20:27:26 -070035
36/***********************************************************/
Eilon Greenstein3196a882008-08-13 15:58:49 -070037/* Shortcut definitions */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -070038/***********************************************************/
39
40#define NIG_STATUS_XGXS0_LINK10G \
41 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
42#define NIG_STATUS_XGXS0_LINK_STATUS \
43 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
44#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
45 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
46#define NIG_STATUS_SERDES0_LINK_STATUS \
47 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
48#define NIG_MASK_MI_INT \
49 NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
50#define NIG_MASK_XGXS0_LINK10G \
51 NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G
52#define NIG_MASK_XGXS0_LINK_STATUS \
53 NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS
54#define NIG_MASK_SERDES0_LINK_STATUS \
55 NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS
56
57#define MDIO_AN_CL73_OR_37_COMPLETE \
58 (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \
59 MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE)
60
61#define XGXS_RESET_BITS \
62 (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW | \
63 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ | \
64 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN | \
65 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \
66 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB)
67
68#define SERDES_RESET_BITS \
69 (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \
70 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ | \
71 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN | \
72 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD)
73
74#define AUTONEG_CL37 SHARED_HW_CFG_AN_ENABLE_CL37
75#define AUTONEG_CL73 SHARED_HW_CFG_AN_ENABLE_CL73
Eilon Greenstein3196a882008-08-13 15:58:49 -070076#define AUTONEG_BAM SHARED_HW_CFG_AN_ENABLE_BAM
77#define AUTONEG_PARALLEL \
Yaniv Rosnerea4e0402008-06-23 20:27:26 -070078 SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
Eilon Greenstein3196a882008-08-13 15:58:49 -070079#define AUTONEG_SGMII_FIBER_AUTODET \
Yaniv Rosnerea4e0402008-06-23 20:27:26 -070080 SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
Eilon Greenstein3196a882008-08-13 15:58:49 -070081#define AUTONEG_REMOTE_PHY SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
Yaniv Rosnerea4e0402008-06-23 20:27:26 -070082
83#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
84 MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
85#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \
86 MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE
87#define GP_STATUS_SPEED_MASK \
88 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK
89#define GP_STATUS_10M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M
90#define GP_STATUS_100M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M
91#define GP_STATUS_1G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G
92#define GP_STATUS_2_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G
93#define GP_STATUS_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G
94#define GP_STATUS_6G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G
95#define GP_STATUS_10G_HIG \
96 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG
97#define GP_STATUS_10G_CX4 \
98 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4
99#define GP_STATUS_12G_HIG \
100 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG
101#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G
102#define GP_STATUS_13G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G
103#define GP_STATUS_15G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G
104#define GP_STATUS_16G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G
105#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX
106#define GP_STATUS_10G_KX4 \
107 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4
108
109#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD
110#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD
111#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD
112#define LINK_100T4 LINK_STATUS_SPEED_AND_DUPLEX_100T4
113#define LINK_100TXFD LINK_STATUS_SPEED_AND_DUPLEX_100TXFD
114#define LINK_1000THD LINK_STATUS_SPEED_AND_DUPLEX_1000THD
115#define LINK_1000TFD LINK_STATUS_SPEED_AND_DUPLEX_1000TFD
116#define LINK_1000XFD LINK_STATUS_SPEED_AND_DUPLEX_1000XFD
117#define LINK_2500THD LINK_STATUS_SPEED_AND_DUPLEX_2500THD
118#define LINK_2500TFD LINK_STATUS_SPEED_AND_DUPLEX_2500TFD
119#define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD
120#define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
121#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD
122#define LINK_12GTFD LINK_STATUS_SPEED_AND_DUPLEX_12GTFD
123#define LINK_12GXFD LINK_STATUS_SPEED_AND_DUPLEX_12GXFD
124#define LINK_12_5GTFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD
125#define LINK_12_5GXFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD
126#define LINK_13GTFD LINK_STATUS_SPEED_AND_DUPLEX_13GTFD
127#define LINK_13GXFD LINK_STATUS_SPEED_AND_DUPLEX_13GXFD
128#define LINK_15GTFD LINK_STATUS_SPEED_AND_DUPLEX_15GTFD
129#define LINK_15GXFD LINK_STATUS_SPEED_AND_DUPLEX_15GXFD
130#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
131#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
132
133#define PHY_XGXS_FLAG 0x1
134#define PHY_SGMII_FLAG 0x2
135#define PHY_SERDES_FLAG 0x4
136
Eilon Greenstein589abe32009-02-12 08:36:55 +0000137/* */
138#define SFP_EEPROM_CON_TYPE_ADDR 0x2
139 #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
140 #define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21
141
142#define SFP_EEPROM_FC_TX_TECH_ADDR 0x8
143 #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4
144 #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8
145#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14
146#define SFP_EEPROM_VENDOR_NAME_SIZE 16
147#define SFP_EEPROM_OPTIONS_ADDR 0x40
148 #define SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1
149#define SFP_EEPROM_OPTIONS_SIZE 2
150
151#define SFP_MODULE_TYPE_UNKNOWN 0x0
152#define SFP_MODULE_TYPE_LC 0x1
153#define SFP_MODULE_TYPE_ACTIVE_COPPER_CABLE 0x2
154#define SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE 0x3
155
156#define SFP_LIMITING_MODE_VALUE 0x0044
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700157/**********************************************************/
158/* INTERFACE */
159/**********************************************************/
160#define CL45_WR_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \
161 bnx2x_cl45_write(_bp, _port, 0, _phy_addr, \
162 DEFAULT_PHY_DEV_ADDR, \
163 (_bank + (_addr & 0xf)), \
164 _val)
165
166#define CL45_RD_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \
167 bnx2x_cl45_read(_bp, _port, 0, _phy_addr, \
168 DEFAULT_PHY_DEV_ADDR, \
169 (_bank + (_addr & 0xf)), \
170 _val)
171
Eilon Greensteinc1b73992009-02-12 08:37:07 +0000172static void bnx2x_set_serdes_access(struct link_params *params)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700173{
174 struct bnx2x *bp = params->bp;
Eilon Greensteinc1b73992009-02-12 08:37:07 +0000175 u32 emac_base = (params->port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
176 /* Set Clause 22 */
177 REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 1);
178 REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000);
179 udelay(500);
180 REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f);
181 udelay(500);
182 /* Set Clause 45 */
183 REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 0);
184}
185static void bnx2x_set_phy_mdio(struct link_params *params, u8 phy_flags)
186{
187 struct bnx2x *bp = params->bp;
188 if (phy_flags & PHY_XGXS_FLAG) {
189 REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST +
190 params->port*0x18, 0);
191 REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
192 DEFAULT_PHY_DEV_ADDR);
193 } else {
194 bnx2x_set_serdes_access(params);
195
196 REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD +
197 params->port*0x10,
198 DEFAULT_PHY_DEV_ADDR);
199 }
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700200}
201
202static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits)
203{
204 u32 val = REG_RD(bp, reg);
205
206 val |= bits;
207 REG_WR(bp, reg, val);
208 return val;
209}
210
211static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
212{
213 u32 val = REG_RD(bp, reg);
214
215 val &= ~bits;
216 REG_WR(bp, reg, val);
217 return val;
218}
219
220static void bnx2x_emac_init(struct link_params *params,
221 struct link_vars *vars)
222{
223 /* reset and unreset the emac core */
224 struct bnx2x *bp = params->bp;
225 u8 port = params->port;
226 u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
227 u32 val;
228 u16 timeout;
229
230 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
231 (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
232 udelay(5);
233 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
234 (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
235
236 /* init emac - use read-modify-write */
237 /* self clear reset */
238 val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
Eilon Greenstein3196a882008-08-13 15:58:49 -0700239 EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700240
241 timeout = 200;
Eilon Greenstein3196a882008-08-13 15:58:49 -0700242 do {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700243 val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
244 DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
245 if (!timeout) {
246 DP(NETIF_MSG_LINK, "EMAC timeout!\n");
247 return;
248 }
249 timeout--;
Eilon Greenstein3196a882008-08-13 15:58:49 -0700250 } while (val & EMAC_MODE_RESET);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700251
252 /* Set mac address */
253 val = ((params->mac_addr[0] << 8) |
254 params->mac_addr[1]);
Eilon Greenstein3196a882008-08-13 15:58:49 -0700255 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700256
257 val = ((params->mac_addr[2] << 24) |
258 (params->mac_addr[3] << 16) |
259 (params->mac_addr[4] << 8) |
260 params->mac_addr[5]);
Eilon Greenstein3196a882008-08-13 15:58:49 -0700261 EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700262}
263
264static u8 bnx2x_emac_enable(struct link_params *params,
265 struct link_vars *vars, u8 lb)
266{
267 struct bnx2x *bp = params->bp;
268 u8 port = params->port;
269 u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
270 u32 val;
271
272 DP(NETIF_MSG_LINK, "enabling EMAC\n");
273
274 /* enable emac and not bmac */
275 REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
276
277 /* for paladium */
278 if (CHIP_REV_IS_EMUL(bp)) {
279 /* Use lane 1 (of lanes 0-3) */
280 REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
281 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
282 port*4, 1);
283 }
284 /* for fpga */
285 else
286
287 if (CHIP_REV_IS_FPGA(bp)) {
288 /* Use lane 1 (of lanes 0-3) */
289 DP(NETIF_MSG_LINK, "bnx2x_emac_enable: Setting FPGA\n");
290
291 REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
292 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4,
293 0);
294 } else
295 /* ASIC */
296 if (vars->phy_flags & PHY_XGXS_FLAG) {
297 u32 ser_lane = ((params->lane_config &
298 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
299 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
300
301 DP(NETIF_MSG_LINK, "XGXS\n");
302 /* select the master lanes (out of 0-3) */
303 REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 +
304 port*4, ser_lane);
305 /* select XGXS */
306 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
307 port*4, 1);
308
309 } else { /* SerDes */
310 DP(NETIF_MSG_LINK, "SerDes\n");
311 /* select SerDes */
312 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
313 port*4, 0);
314 }
315
Eilon Greenstein811a2f22009-02-12 08:37:04 +0000316 bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
317 EMAC_RX_MODE_RESET);
318 bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
319 EMAC_TX_MODE_RESET);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700320
321 if (CHIP_REV_IS_SLOW(bp)) {
322 /* config GMII mode */
323 val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
Eilon Greenstein3196a882008-08-13 15:58:49 -0700324 EMAC_WR(bp, EMAC_REG_EMAC_MODE,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700325 (val | EMAC_MODE_PORT_GMII));
326 } else { /* ASIC */
327 /* pause enable/disable */
328 bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
329 EMAC_RX_MODE_FLOW_EN);
David S. Millerc0700f92008-12-16 23:53:20 -0800330 if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700331 bnx2x_bits_en(bp, emac_base +
332 EMAC_REG_EMAC_RX_MODE,
333 EMAC_RX_MODE_FLOW_EN);
334
335 bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -0700336 (EMAC_TX_MODE_EXT_PAUSE_EN |
337 EMAC_TX_MODE_FLOW_EN));
David S. Millerc0700f92008-12-16 23:53:20 -0800338 if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700339 bnx2x_bits_en(bp, emac_base +
340 EMAC_REG_EMAC_TX_MODE,
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -0700341 (EMAC_TX_MODE_EXT_PAUSE_EN |
342 EMAC_TX_MODE_FLOW_EN));
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700343 }
344
345 /* KEEP_VLAN_TAG, promiscuous */
346 val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
347 val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
Eilon Greenstein3196a882008-08-13 15:58:49 -0700348 EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700349
350 /* Set Loopback */
351 val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
352 if (lb)
353 val |= 0x810;
354 else
355 val &= ~0x810;
Eilon Greenstein3196a882008-08-13 15:58:49 -0700356 EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700357
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +0000358 /* enable emac */
359 REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
360
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700361 /* enable emac for jumbo packets */
Eilon Greenstein3196a882008-08-13 15:58:49 -0700362 EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700363 (EMAC_RX_MTU_SIZE_JUMBO_ENA |
364 (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)));
365
366 /* strip CRC */
367 REG_WR(bp, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1);
368
369 /* disable the NIG in/out to the bmac */
370 REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x0);
371 REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0);
372 REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x0);
373
374 /* enable the NIG in/out to the emac */
375 REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1);
376 val = 0;
David S. Millerc0700f92008-12-16 23:53:20 -0800377 if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700378 val = 1;
379
380 REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
381 REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1);
382
383 if (CHIP_REV_IS_EMUL(bp)) {
384 /* take the BigMac out of reset */
385 REG_WR(bp,
386 GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
387 (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
388
389 /* enable access for bmac registers */
390 REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
391 }
392
393 vars->mac_type = MAC_TYPE_EMAC;
394 return 0;
395}
396
397
398
399static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
400 u8 is_lb)
401{
402 struct bnx2x *bp = params->bp;
403 u8 port = params->port;
404 u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
405 NIG_REG_INGRESS_BMAC0_MEM;
406 u32 wb_data[2];
407 u32 val;
408
409 DP(NETIF_MSG_LINK, "Enabling BigMAC\n");
410 /* reset and unreset the BigMac */
411 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
412 (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
413 msleep(1);
414
415 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
416 (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
417
418 /* enable access for bmac registers */
419 REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
420
421 /* XGXS control */
422 wb_data[0] = 0x3c;
423 wb_data[1] = 0;
424 REG_WR_DMAE(bp, bmac_addr +
425 BIGMAC_REGISTER_BMAC_XGXS_CONTROL,
426 wb_data, 2);
427
428 /* tx MAC SA */
429 wb_data[0] = ((params->mac_addr[2] << 24) |
430 (params->mac_addr[3] << 16) |
431 (params->mac_addr[4] << 8) |
432 params->mac_addr[5]);
433 wb_data[1] = ((params->mac_addr[0] << 8) |
434 params->mac_addr[1]);
435 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR,
436 wb_data, 2);
437
438 /* tx control */
439 val = 0xc0;
David S. Millerc0700f92008-12-16 23:53:20 -0800440 if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700441 val |= 0x800000;
442 wb_data[0] = val;
443 wb_data[1] = 0;
444 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL,
445 wb_data, 2);
446
447 /* mac control */
448 val = 0x3;
449 if (is_lb) {
450 val |= 0x4;
451 DP(NETIF_MSG_LINK, "enable bmac loopback\n");
452 }
453 wb_data[0] = val;
454 wb_data[1] = 0;
455 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
456 wb_data, 2);
457
458
459 /* set rx mtu */
460 wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
461 wb_data[1] = 0;
462 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE,
463 wb_data, 2);
464
465 /* rx control set to don't strip crc */
466 val = 0x14;
David S. Millerc0700f92008-12-16 23:53:20 -0800467 if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700468 val |= 0x20;
469 wb_data[0] = val;
470 wb_data[1] = 0;
471 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL,
472 wb_data, 2);
473
474 /* set tx mtu */
475 wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
476 wb_data[1] = 0;
477 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE,
478 wb_data, 2);
479
480 /* set cnt max size */
481 wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
482 wb_data[1] = 0;
483 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE,
484 wb_data, 2);
485
486 /* configure safc */
487 wb_data[0] = 0x1000200;
488 wb_data[1] = 0;
489 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
490 wb_data, 2);
491 /* fix for emulation */
492 if (CHIP_REV_IS_EMUL(bp)) {
493 wb_data[0] = 0xf000;
494 wb_data[1] = 0;
495 REG_WR_DMAE(bp,
496 bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
497 wb_data, 2);
498 }
499
500 REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1);
501 REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
502 REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
503 val = 0;
David S. Millerc0700f92008-12-16 23:53:20 -0800504 if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700505 val = 1;
506 REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
507 REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
508 REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x0);
509 REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0);
510 REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x1);
511 REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x1);
512
513 vars->mac_type = MAC_TYPE_BMAC;
514 return 0;
515}
516
517static void bnx2x_phy_deassert(struct link_params *params, u8 phy_flags)
518{
519 struct bnx2x *bp = params->bp;
520 u32 val;
521
522 if (phy_flags & PHY_XGXS_FLAG) {
523 DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:XGXS\n");
524 val = XGXS_RESET_BITS;
525
526 } else { /* SerDes */
527 DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:SerDes\n");
528 val = SERDES_RESET_BITS;
529 }
530
531 val = val << (params->port*16);
532
533 /* reset and unreset the SerDes/XGXS */
534 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
535 val);
536 udelay(500);
537 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET,
538 val);
Eilon Greensteinc1b73992009-02-12 08:37:07 +0000539 bnx2x_set_phy_mdio(params, phy_flags);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700540}
541
542void bnx2x_link_status_update(struct link_params *params,
543 struct link_vars *vars)
544{
545 struct bnx2x *bp = params->bp;
546 u8 link_10g;
547 u8 port = params->port;
548
549 if (params->switch_cfg == SWITCH_CFG_1G)
550 vars->phy_flags = PHY_SERDES_FLAG;
551 else
552 vars->phy_flags = PHY_XGXS_FLAG;
553 vars->link_status = REG_RD(bp, params->shmem_base +
554 offsetof(struct shmem_region,
555 port_mb[port].link_status));
556
557 vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
558
559 if (vars->link_up) {
560 DP(NETIF_MSG_LINK, "phy link up\n");
561
562 vars->phy_link_up = 1;
563 vars->duplex = DUPLEX_FULL;
564 switch (vars->link_status &
565 LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
566 case LINK_10THD:
567 vars->duplex = DUPLEX_HALF;
568 /* fall thru */
569 case LINK_10TFD:
570 vars->line_speed = SPEED_10;
571 break;
572
573 case LINK_100TXHD:
574 vars->duplex = DUPLEX_HALF;
575 /* fall thru */
576 case LINK_100T4:
577 case LINK_100TXFD:
578 vars->line_speed = SPEED_100;
579 break;
580
581 case LINK_1000THD:
582 vars->duplex = DUPLEX_HALF;
583 /* fall thru */
584 case LINK_1000TFD:
585 vars->line_speed = SPEED_1000;
586 break;
587
588 case LINK_2500THD:
589 vars->duplex = DUPLEX_HALF;
590 /* fall thru */
591 case LINK_2500TFD:
592 vars->line_speed = SPEED_2500;
593 break;
594
595 case LINK_10GTFD:
596 vars->line_speed = SPEED_10000;
597 break;
598
599 case LINK_12GTFD:
600 vars->line_speed = SPEED_12000;
601 break;
602
603 case LINK_12_5GTFD:
604 vars->line_speed = SPEED_12500;
605 break;
606
607 case LINK_13GTFD:
608 vars->line_speed = SPEED_13000;
609 break;
610
611 case LINK_15GTFD:
612 vars->line_speed = SPEED_15000;
613 break;
614
615 case LINK_16GTFD:
616 vars->line_speed = SPEED_16000;
617 break;
618
619 default:
620 break;
621 }
622
623 if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED)
David S. Millerc0700f92008-12-16 23:53:20 -0800624 vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700625 else
David S. Millerc0700f92008-12-16 23:53:20 -0800626 vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700627
628 if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED)
David S. Millerc0700f92008-12-16 23:53:20 -0800629 vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700630 else
David S. Millerc0700f92008-12-16 23:53:20 -0800631 vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700632
633 if (vars->phy_flags & PHY_XGXS_FLAG) {
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -0700634 if (vars->line_speed &&
635 ((vars->line_speed == SPEED_10) ||
636 (vars->line_speed == SPEED_100))) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700637 vars->phy_flags |= PHY_SGMII_FLAG;
638 } else {
639 vars->phy_flags &= ~PHY_SGMII_FLAG;
640 }
641 }
642
643 /* anything 10 and over uses the bmac */
644 link_10g = ((vars->line_speed == SPEED_10000) ||
645 (vars->line_speed == SPEED_12000) ||
646 (vars->line_speed == SPEED_12500) ||
647 (vars->line_speed == SPEED_13000) ||
648 (vars->line_speed == SPEED_15000) ||
649 (vars->line_speed == SPEED_16000));
650 if (link_10g)
651 vars->mac_type = MAC_TYPE_BMAC;
652 else
653 vars->mac_type = MAC_TYPE_EMAC;
654
655 } else { /* link down */
656 DP(NETIF_MSG_LINK, "phy link down\n");
657
658 vars->phy_link_up = 0;
659
660 vars->line_speed = 0;
661 vars->duplex = DUPLEX_FULL;
David S. Millerc0700f92008-12-16 23:53:20 -0800662 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700663
664 /* indicate no mac active */
665 vars->mac_type = MAC_TYPE_NONE;
666 }
667
668 DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x\n",
669 vars->link_status, vars->phy_link_up);
670 DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n",
671 vars->line_speed, vars->duplex, vars->flow_ctrl);
672}
673
674static void bnx2x_update_mng(struct link_params *params, u32 link_status)
675{
676 struct bnx2x *bp = params->bp;
677 REG_WR(bp, params->shmem_base +
678 offsetof(struct shmem_region,
679 port_mb[params->port].link_status),
680 link_status);
681}
682
683static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port)
684{
685 u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
686 NIG_REG_INGRESS_BMAC0_MEM;
687 u32 wb_data[2];
Eilon Greenstein3196a882008-08-13 15:58:49 -0700688 u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700689
690 /* Only if the bmac is out of reset */
691 if (REG_RD(bp, MISC_REG_RESET_REG_2) &
692 (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) &&
693 nig_bmac_enable) {
694
695 /* Clear Rx Enable bit in BMAC_CONTROL register */
696 REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
697 wb_data, 2);
698 wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
699 REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
700 wb_data, 2);
701
702 msleep(1);
703 }
704}
705
706static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
707 u32 line_speed)
708{
709 struct bnx2x *bp = params->bp;
710 u8 port = params->port;
711 u32 init_crd, crd;
712 u32 count = 1000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700713
714 /* disable port */
715 REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
716
717 /* wait for init credit */
718 init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4);
719 crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
720 DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd);
721
722 while ((init_crd != crd) && count) {
723 msleep(5);
724
725 crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
726 count--;
727 }
728 crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
729 if (init_crd != crd) {
730 DP(NETIF_MSG_LINK, "BUG! init_crd 0x%x != crd 0x%x\n",
731 init_crd, crd);
732 return -EINVAL;
733 }
734
David S. Millerc0700f92008-12-16 23:53:20 -0800735 if (flow_ctrl & BNX2X_FLOW_CTRL_RX ||
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -0700736 line_speed == SPEED_10 ||
737 line_speed == SPEED_100 ||
738 line_speed == SPEED_1000 ||
739 line_speed == SPEED_2500) {
740 REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700741 /* update threshold */
742 REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
743 /* update init credit */
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -0700744 init_crd = 778; /* (800-18-4) */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700745
746 } else {
747 u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE +
748 ETH_OVREHEAD)/16;
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -0700749 REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700750 /* update threshold */
751 REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
752 /* update init credit */
753 switch (line_speed) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700754 case SPEED_10000:
755 init_crd = thresh + 553 - 22;
756 break;
757
758 case SPEED_12000:
759 init_crd = thresh + 664 - 22;
760 break;
761
762 case SPEED_13000:
763 init_crd = thresh + 742 - 22;
764 break;
765
766 case SPEED_16000:
767 init_crd = thresh + 778 - 22;
768 break;
769 default:
770 DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
771 line_speed);
772 return -EINVAL;
773 break;
774 }
775 }
776 REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd);
777 DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n",
778 line_speed, init_crd);
779
780 /* probe the credit changes */
781 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1);
782 msleep(5);
783 REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0);
784
785 /* enable port */
786 REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0);
787 return 0;
788}
789
Eilon Greenstein589abe32009-02-12 08:36:55 +0000790static u32 bnx2x_get_emac_base(struct bnx2x *bp, u32 ext_phy_type, u8 port)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700791{
792 u32 emac_base;
793 switch (ext_phy_type) {
794 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
Eilon Greenstein589abe32009-02-12 08:36:55 +0000795 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
796 /* All MDC/MDIO is directed through single EMAC */
797 if (REG_RD(bp, NIG_REG_PORT_SWAP))
798 emac_base = GRCBASE_EMAC0;
799 else
800 emac_base = GRCBASE_EMAC1;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700801 break;
802 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
Eilon Greenstein6378c022008-08-13 15:59:25 -0700803 emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700804 break;
805 default:
Eilon Greenstein6378c022008-08-13 15:59:25 -0700806 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700807 break;
808 }
809 return emac_base;
810
811}
812
813u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
814 u8 phy_addr, u8 devad, u16 reg, u16 val)
815{
816 u32 tmp, saved_mode;
817 u8 i, rc = 0;
Eilon Greenstein589abe32009-02-12 08:36:55 +0000818 u32 mdio_ctrl = bnx2x_get_emac_base(bp, ext_phy_type, port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700819
820 /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
821 * (a value of 49==0x31) and make sure that the AUTO poll is off
822 */
Eilon Greenstein589abe32009-02-12 08:36:55 +0000823
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700824 saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
825 tmp = saved_mode & ~(EMAC_MDIO_MODE_AUTO_POLL |
826 EMAC_MDIO_MODE_CLOCK_CNT);
827 tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
828 (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
829 REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
830 REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
831 udelay(40);
832
833 /* address */
834
835 tmp = ((phy_addr << 21) | (devad << 16) | reg |
836 EMAC_MDIO_COMM_COMMAND_ADDRESS |
837 EMAC_MDIO_COMM_START_BUSY);
838 REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
839
840 for (i = 0; i < 50; i++) {
841 udelay(10);
842
843 tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
844 if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
845 udelay(5);
846 break;
847 }
848 }
849 if (tmp & EMAC_MDIO_COMM_START_BUSY) {
850 DP(NETIF_MSG_LINK, "write phy register failed\n");
851 rc = -EFAULT;
852 } else {
853 /* data */
854 tmp = ((phy_addr << 21) | (devad << 16) | val |
855 EMAC_MDIO_COMM_COMMAND_WRITE_45 |
856 EMAC_MDIO_COMM_START_BUSY);
857 REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
858
859 for (i = 0; i < 50; i++) {
860 udelay(10);
861
862 tmp = REG_RD(bp, mdio_ctrl +
863 EMAC_REG_EMAC_MDIO_COMM);
864 if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
865 udelay(5);
866 break;
867 }
868 }
869 if (tmp & EMAC_MDIO_COMM_START_BUSY) {
870 DP(NETIF_MSG_LINK, "write phy register failed\n");
871 rc = -EFAULT;
872 }
873 }
874
875 /* Restore the saved mode */
876 REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode);
877
878 return rc;
879}
880
881u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type,
882 u8 phy_addr, u8 devad, u16 reg, u16 *ret_val)
883{
884 u32 val, saved_mode;
885 u16 i;
886 u8 rc = 0;
887
Eilon Greenstein589abe32009-02-12 08:36:55 +0000888 u32 mdio_ctrl = bnx2x_get_emac_base(bp, ext_phy_type, port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700889 /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
890 * (a value of 49==0x31) and make sure that the AUTO poll is off
891 */
Eilon Greenstein589abe32009-02-12 08:36:55 +0000892
Yaniv Rosnerea4e0402008-06-23 20:27:26 -0700893 saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
894 val = saved_mode & ((EMAC_MDIO_MODE_AUTO_POLL |
895 EMAC_MDIO_MODE_CLOCK_CNT));
896 val |= (EMAC_MDIO_MODE_CLAUSE_45 |
897 (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
898 REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
899 REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
900 udelay(40);
901
902 /* address */
903 val = ((phy_addr << 21) | (devad << 16) | reg |
904 EMAC_MDIO_COMM_COMMAND_ADDRESS |
905 EMAC_MDIO_COMM_START_BUSY);
906 REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
907
908 for (i = 0; i < 50; i++) {
909 udelay(10);
910
911 val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
912 if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
913 udelay(5);
914 break;
915 }
916 }
917 if (val & EMAC_MDIO_COMM_START_BUSY) {
918 DP(NETIF_MSG_LINK, "read phy register failed\n");
919
920 *ret_val = 0;
921 rc = -EFAULT;
922
923 } else {
924 /* data */
925 val = ((phy_addr << 21) | (devad << 16) |
926 EMAC_MDIO_COMM_COMMAND_READ_45 |
927 EMAC_MDIO_COMM_START_BUSY);
928 REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
929
930 for (i = 0; i < 50; i++) {
931 udelay(10);
932
933 val = REG_RD(bp, mdio_ctrl +
934 EMAC_REG_EMAC_MDIO_COMM);
935 if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
936 *ret_val = (u16)(val & EMAC_MDIO_COMM_DATA);
937 break;
938 }
939 }
940 if (val & EMAC_MDIO_COMM_START_BUSY) {
941 DP(NETIF_MSG_LINK, "read phy register failed\n");
942
943 *ret_val = 0;
944 rc = -EFAULT;
945 }
946 }
947
948 /* Restore the saved mode */
949 REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode);
950
951 return rc;
952}
953
954static void bnx2x_set_aer_mmd(struct link_params *params,
955 struct link_vars *vars)
956{
957 struct bnx2x *bp = params->bp;
958 u32 ser_lane;
959 u16 offset;
960
961 ser_lane = ((params->lane_config &
962 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
963 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
964
965 offset = (vars->phy_flags & PHY_XGXS_FLAG) ?
966 (params->phy_addr + ser_lane) : 0;
967
968 CL45_WR_OVER_CL22(bp, params->port,
969 params->phy_addr,
970 MDIO_REG_BANK_AER_BLOCK,
971 MDIO_AER_BLOCK_AER_REG, 0x3800 + offset);
972}
973
974static void bnx2x_set_master_ln(struct link_params *params)
975{
976 struct bnx2x *bp = params->bp;
977 u16 new_master_ln, ser_lane;
978 ser_lane = ((params->lane_config &
979 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
980 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
981
982 /* set the master_ln for AN */
983 CL45_RD_OVER_CL22(bp, params->port,
984 params->phy_addr,
985 MDIO_REG_BANK_XGXS_BLOCK2,
986 MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
987 &new_master_ln);
988
989 CL45_WR_OVER_CL22(bp, params->port,
990 params->phy_addr,
991 MDIO_REG_BANK_XGXS_BLOCK2 ,
992 MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
993 (new_master_ln | ser_lane));
994}
995
996static u8 bnx2x_reset_unicore(struct link_params *params)
997{
998 struct bnx2x *bp = params->bp;
999 u16 mii_control;
1000 u16 i;
1001
1002 CL45_RD_OVER_CL22(bp, params->port,
1003 params->phy_addr,
1004 MDIO_REG_BANK_COMBO_IEEE0,
1005 MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
1006
1007 /* reset the unicore */
1008 CL45_WR_OVER_CL22(bp, params->port,
1009 params->phy_addr,
1010 MDIO_REG_BANK_COMBO_IEEE0,
1011 MDIO_COMBO_IEEE0_MII_CONTROL,
1012 (mii_control |
1013 MDIO_COMBO_IEEO_MII_CONTROL_RESET));
1014
Eilon Greensteinc1b73992009-02-12 08:37:07 +00001015 bnx2x_set_serdes_access(params);
1016
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001017 /* wait for the reset to self clear */
1018 for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) {
1019 udelay(5);
1020
1021 /* the reset erased the previous bank value */
1022 CL45_RD_OVER_CL22(bp, params->port,
1023 params->phy_addr,
1024 MDIO_REG_BANK_COMBO_IEEE0,
1025 MDIO_COMBO_IEEE0_MII_CONTROL,
1026 &mii_control);
1027
1028 if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) {
1029 udelay(5);
1030 return 0;
1031 }
1032 }
1033
1034 DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n");
1035 return -EINVAL;
1036
1037}
1038
1039static void bnx2x_set_swap_lanes(struct link_params *params)
1040{
1041 struct bnx2x *bp = params->bp;
1042 /* Each two bits represents a lane number:
1043 No swap is 0123 => 0x1b no need to enable the swap */
1044 u16 ser_lane, rx_lane_swap, tx_lane_swap;
1045
1046 ser_lane = ((params->lane_config &
1047 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
1048 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
1049 rx_lane_swap = ((params->lane_config &
1050 PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >>
1051 PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT);
1052 tx_lane_swap = ((params->lane_config &
1053 PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >>
1054 PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT);
1055
1056 if (rx_lane_swap != 0x1b) {
1057 CL45_WR_OVER_CL22(bp, params->port,
1058 params->phy_addr,
1059 MDIO_REG_BANK_XGXS_BLOCK2,
1060 MDIO_XGXS_BLOCK2_RX_LN_SWAP,
1061 (rx_lane_swap |
1062 MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE |
1063 MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE));
1064 } else {
1065 CL45_WR_OVER_CL22(bp, params->port,
1066 params->phy_addr,
1067 MDIO_REG_BANK_XGXS_BLOCK2,
1068 MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0);
1069 }
1070
1071 if (tx_lane_swap != 0x1b) {
1072 CL45_WR_OVER_CL22(bp, params->port,
1073 params->phy_addr,
1074 MDIO_REG_BANK_XGXS_BLOCK2,
1075 MDIO_XGXS_BLOCK2_TX_LN_SWAP,
1076 (tx_lane_swap |
1077 MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE));
1078 } else {
1079 CL45_WR_OVER_CL22(bp, params->port,
1080 params->phy_addr,
1081 MDIO_REG_BANK_XGXS_BLOCK2,
1082 MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0);
1083 }
1084}
1085
1086static void bnx2x_set_parallel_detection(struct link_params *params,
Eilon Greenstein3196a882008-08-13 15:58:49 -07001087 u8 phy_flags)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001088{
1089 struct bnx2x *bp = params->bp;
1090 u16 control2;
1091
1092 CL45_RD_OVER_CL22(bp, params->port,
1093 params->phy_addr,
1094 MDIO_REG_BANK_SERDES_DIGITAL,
1095 MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
1096 &control2);
1097
1098
1099 control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
1100
1101
1102 CL45_WR_OVER_CL22(bp, params->port,
1103 params->phy_addr,
1104 MDIO_REG_BANK_SERDES_DIGITAL,
1105 MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
1106 control2);
1107
1108 if (phy_flags & PHY_XGXS_FLAG) {
1109 DP(NETIF_MSG_LINK, "XGXS\n");
1110
1111 CL45_WR_OVER_CL22(bp, params->port,
1112 params->phy_addr,
1113 MDIO_REG_BANK_10G_PARALLEL_DETECT,
1114 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
1115 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
1116
1117 CL45_RD_OVER_CL22(bp, params->port,
1118 params->phy_addr,
1119 MDIO_REG_BANK_10G_PARALLEL_DETECT,
1120 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
1121 &control2);
1122
1123
1124 control2 |=
1125 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
1126
1127 CL45_WR_OVER_CL22(bp, params->port,
1128 params->phy_addr,
1129 MDIO_REG_BANK_10G_PARALLEL_DETECT,
1130 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
1131 control2);
1132
1133 /* Disable parallel detection of HiG */
1134 CL45_WR_OVER_CL22(bp, params->port,
1135 params->phy_addr,
1136 MDIO_REG_BANK_XGXS_BLOCK2,
1137 MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
1138 MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
1139 MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
1140 }
1141}
1142
1143static void bnx2x_set_autoneg(struct link_params *params,
1144 struct link_vars *vars)
1145{
1146 struct bnx2x *bp = params->bp;
1147 u16 reg_val;
1148
1149 /* CL37 Autoneg */
1150
1151 CL45_RD_OVER_CL22(bp, params->port,
1152 params->phy_addr,
1153 MDIO_REG_BANK_COMBO_IEEE0,
1154 MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
1155
1156 /* CL37 Autoneg Enabled */
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001157 if (vars->line_speed == SPEED_AUTO_NEG)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001158 reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
1159 else /* CL37 Autoneg Disabled */
1160 reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
1161 MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN);
1162
1163 CL45_WR_OVER_CL22(bp, params->port,
1164 params->phy_addr,
1165 MDIO_REG_BANK_COMBO_IEEE0,
1166 MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
1167
1168 /* Enable/Disable Autodetection */
1169
1170 CL45_RD_OVER_CL22(bp, params->port,
1171 params->phy_addr,
1172 MDIO_REG_BANK_SERDES_DIGITAL,
1173 MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
1174 reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001175 if (vars->line_speed == SPEED_AUTO_NEG)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001176 reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
1177 else
1178 reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
1179
1180 CL45_WR_OVER_CL22(bp, params->port,
1181 params->phy_addr,
1182 MDIO_REG_BANK_SERDES_DIGITAL,
1183 MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val);
1184
1185 /* Enable TetonII and BAM autoneg */
1186 CL45_RD_OVER_CL22(bp, params->port,
1187 params->phy_addr,
1188 MDIO_REG_BANK_BAM_NEXT_PAGE,
1189 MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
1190 &reg_val);
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001191 if (vars->line_speed == SPEED_AUTO_NEG) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001192 /* Enable BAM aneg Mode and TetonII aneg Mode */
1193 reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
1194 MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
1195 } else {
1196 /* TetonII and BAM Autoneg Disabled */
1197 reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
1198 MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
1199 }
1200 CL45_WR_OVER_CL22(bp, params->port,
1201 params->phy_addr,
1202 MDIO_REG_BANK_BAM_NEXT_PAGE,
1203 MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
1204 reg_val);
1205
Eilon Greenstein3a36f2e2009-02-12 08:37:09 +00001206 /* CL73 Autoneg Disabled */
1207 reg_val = 0;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001208
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001209 CL45_WR_OVER_CL22(bp, params->port,
1210 params->phy_addr,
1211 MDIO_REG_BANK_CL73_IEEEB0,
1212 MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val);
1213}
1214
1215/* program SerDes, forced speed */
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001216static void bnx2x_program_serdes(struct link_params *params,
1217 struct link_vars *vars)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001218{
1219 struct bnx2x *bp = params->bp;
1220 u16 reg_val;
1221
1222 /* program duplex, disable autoneg */
1223
1224 CL45_RD_OVER_CL22(bp, params->port,
1225 params->phy_addr,
1226 MDIO_REG_BANK_COMBO_IEEE0,
1227 MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
1228 reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX |
1229 MDIO_COMBO_IEEO_MII_CONTROL_AN_EN);
1230 if (params->req_duplex == DUPLEX_FULL)
1231 reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
1232 CL45_WR_OVER_CL22(bp, params->port,
1233 params->phy_addr,
1234 MDIO_REG_BANK_COMBO_IEEE0,
1235 MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
1236
1237 /* program speed
1238 - needed only if the speed is greater than 1G (2.5G or 10G) */
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001239 CL45_RD_OVER_CL22(bp, params->port,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001240 params->phy_addr,
1241 MDIO_REG_BANK_SERDES_DIGITAL,
1242 MDIO_SERDES_DIGITAL_MISC1, &reg_val);
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001243 /* clearing the speed value before setting the right speed */
1244 DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val);
1245
1246 reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
1247 MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
1248
1249 if (!((vars->line_speed == SPEED_1000) ||
1250 (vars->line_speed == SPEED_100) ||
1251 (vars->line_speed == SPEED_10))) {
1252
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001253 reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
1254 MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001255 if (vars->line_speed == SPEED_10000)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001256 reg_val |=
1257 MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001258 if (vars->line_speed == SPEED_13000)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001259 reg_val |=
1260 MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G;
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001261 }
1262
1263 CL45_WR_OVER_CL22(bp, params->port,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001264 params->phy_addr,
1265 MDIO_REG_BANK_SERDES_DIGITAL,
1266 MDIO_SERDES_DIGITAL_MISC1, reg_val);
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001267
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001268}
1269
1270static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
1271{
1272 struct bnx2x *bp = params->bp;
1273 u16 val = 0;
1274
1275 /* configure the 48 bits for BAM AN */
1276
1277 /* set extended capabilities */
1278 if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
1279 val |= MDIO_OVER_1G_UP1_2_5G;
1280 if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
1281 val |= MDIO_OVER_1G_UP1_10G;
1282 CL45_WR_OVER_CL22(bp, params->port,
1283 params->phy_addr,
1284 MDIO_REG_BANK_OVER_1G,
1285 MDIO_OVER_1G_UP1, val);
1286
1287 CL45_WR_OVER_CL22(bp, params->port,
1288 params->phy_addr,
1289 MDIO_REG_BANK_OVER_1G,
1290 MDIO_OVER_1G_UP3, 0);
1291}
1292
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001293static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001294{
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001295 *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001296 /* resolve pause mode and advertisement
1297 * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
1298
1299 switch (params->req_flow_ctrl) {
David S. Millerc0700f92008-12-16 23:53:20 -08001300 case BNX2X_FLOW_CTRL_AUTO:
1301 if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) {
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001302 *ieee_fc |=
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001303 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
1304 } else {
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001305 *ieee_fc |=
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001306 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
1307 }
1308 break;
David S. Millerc0700f92008-12-16 23:53:20 -08001309 case BNX2X_FLOW_CTRL_TX:
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001310 *ieee_fc |=
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001311 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
1312 break;
1313
David S. Millerc0700f92008-12-16 23:53:20 -08001314 case BNX2X_FLOW_CTRL_RX:
1315 case BNX2X_FLOW_CTRL_BOTH:
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001316 *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001317 break;
1318
David S. Millerc0700f92008-12-16 23:53:20 -08001319 case BNX2X_FLOW_CTRL_NONE:
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001320 default:
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001321 *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001322 break;
1323 }
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001324}
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001325
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001326static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
1327 u32 ieee_fc)
1328{
1329 struct bnx2x *bp = params->bp;
1330 /* for AN, we are always publishing full duplex */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001331
1332 CL45_WR_OVER_CL22(bp, params->port,
1333 params->phy_addr,
1334 MDIO_REG_BANK_COMBO_IEEE0,
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001335 MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001336}
1337
1338static void bnx2x_restart_autoneg(struct link_params *params)
1339{
1340 struct bnx2x *bp = params->bp;
Eilon Greenstein3a36f2e2009-02-12 08:37:09 +00001341 u16 mii_control;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001342 DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n");
Eilon Greenstein3a36f2e2009-02-12 08:37:09 +00001343 /* Enable and restart BAM/CL37 aneg */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001344
Eilon Greenstein3a36f2e2009-02-12 08:37:09 +00001345 CL45_RD_OVER_CL22(bp, params->port,
1346 params->phy_addr,
1347 MDIO_REG_BANK_COMBO_IEEE0,
1348 MDIO_COMBO_IEEE0_MII_CONTROL,
1349 &mii_control);
1350 DP(NETIF_MSG_LINK,
1351 "bnx2x_restart_autoneg mii_control before = 0x%x\n",
1352 mii_control);
1353 CL45_WR_OVER_CL22(bp, params->port,
1354 params->phy_addr,
1355 MDIO_REG_BANK_COMBO_IEEE0,
1356 MDIO_COMBO_IEEE0_MII_CONTROL,
1357 (mii_control |
1358 MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
1359 MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001360}
1361
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001362static void bnx2x_initialize_sgmii_process(struct link_params *params,
1363 struct link_vars *vars)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001364{
1365 struct bnx2x *bp = params->bp;
1366 u16 control1;
1367
1368 /* in SGMII mode, the unicore is always slave */
1369
1370 CL45_RD_OVER_CL22(bp, params->port,
1371 params->phy_addr,
1372 MDIO_REG_BANK_SERDES_DIGITAL,
1373 MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
1374 &control1);
1375 control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT;
1376 /* set sgmii mode (and not fiber) */
1377 control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE |
1378 MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET |
1379 MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE);
1380 CL45_WR_OVER_CL22(bp, params->port,
1381 params->phy_addr,
1382 MDIO_REG_BANK_SERDES_DIGITAL,
1383 MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
1384 control1);
1385
1386 /* if forced speed */
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001387 if (!(vars->line_speed == SPEED_AUTO_NEG)) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001388 /* set speed, disable autoneg */
1389 u16 mii_control;
1390
1391 CL45_RD_OVER_CL22(bp, params->port,
1392 params->phy_addr,
1393 MDIO_REG_BANK_COMBO_IEEE0,
1394 MDIO_COMBO_IEEE0_MII_CONTROL,
1395 &mii_control);
1396 mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
1397 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK|
1398 MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
1399
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001400 switch (vars->line_speed) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001401 case SPEED_100:
1402 mii_control |=
1403 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
1404 break;
1405 case SPEED_1000:
1406 mii_control |=
1407 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000;
1408 break;
1409 case SPEED_10:
1410 /* there is nothing to set for 10M */
1411 break;
1412 default:
1413 /* invalid speed for SGMII */
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001414 DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
1415 vars->line_speed);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001416 break;
1417 }
1418
1419 /* setting the full duplex */
1420 if (params->req_duplex == DUPLEX_FULL)
1421 mii_control |=
1422 MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
1423 CL45_WR_OVER_CL22(bp, params->port,
1424 params->phy_addr,
1425 MDIO_REG_BANK_COMBO_IEEE0,
1426 MDIO_COMBO_IEEE0_MII_CONTROL,
1427 mii_control);
1428
1429 } else { /* AN mode */
1430 /* enable and restart AN */
1431 bnx2x_restart_autoneg(params);
1432 }
1433}
1434
1435
1436/*
1437 * link management
1438 */
1439
1440static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001441{ /* LD LP */
1442 switch (pause_result) { /* ASYM P ASYM P */
1443 case 0xb: /* 1 0 1 1 */
David S. Millerc0700f92008-12-16 23:53:20 -08001444 vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001445 break;
1446
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001447 case 0xe: /* 1 1 1 0 */
David S. Millerc0700f92008-12-16 23:53:20 -08001448 vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001449 break;
1450
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001451 case 0x5: /* 0 1 0 1 */
1452 case 0x7: /* 0 1 1 1 */
1453 case 0xd: /* 1 1 0 1 */
1454 case 0xf: /* 1 1 1 1 */
David S. Millerc0700f92008-12-16 23:53:20 -08001455 vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001456 break;
1457
1458 default:
1459 break;
1460 }
1461}
1462
1463static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
1464 struct link_vars *vars)
1465{
1466 struct bnx2x *bp = params->bp;
1467 u8 ext_phy_addr;
Eilon Greenstein3196a882008-08-13 15:58:49 -07001468 u16 ld_pause; /* local */
1469 u16 lp_pause; /* link partner */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001470 u16 an_complete; /* AN complete */
1471 u16 pause_result;
1472 u8 ret = 0;
1473 u32 ext_phy_type;
1474 u8 port = params->port;
1475 ext_phy_addr = ((params->ext_phy_config &
1476 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
1477 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
1478
1479 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
1480 /* read twice */
1481
1482 bnx2x_cl45_read(bp, port,
1483 ext_phy_type,
1484 ext_phy_addr,
1485 MDIO_AN_DEVAD,
1486 MDIO_AN_REG_STATUS, &an_complete);
1487 bnx2x_cl45_read(bp, port,
1488 ext_phy_type,
1489 ext_phy_addr,
1490 MDIO_AN_DEVAD,
1491 MDIO_AN_REG_STATUS, &an_complete);
1492
1493 if (an_complete & MDIO_AN_REG_STATUS_AN_COMPLETE) {
1494 ret = 1;
1495 bnx2x_cl45_read(bp, port,
1496 ext_phy_type,
1497 ext_phy_addr,
1498 MDIO_AN_DEVAD,
1499 MDIO_AN_REG_ADV_PAUSE, &ld_pause);
1500 bnx2x_cl45_read(bp, port,
1501 ext_phy_type,
1502 ext_phy_addr,
1503 MDIO_AN_DEVAD,
1504 MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
1505 pause_result = (ld_pause &
1506 MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
1507 pause_result |= (lp_pause &
1508 MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
1509 DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
1510 pause_result);
1511 bnx2x_pause_resolve(vars, pause_result);
David S. Millerc0700f92008-12-16 23:53:20 -08001512 if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE &&
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001513 ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
1514 bnx2x_cl45_read(bp, port,
1515 ext_phy_type,
1516 ext_phy_addr,
1517 MDIO_AN_DEVAD,
1518 MDIO_AN_REG_CL37_FC_LD, &ld_pause);
1519
1520 bnx2x_cl45_read(bp, port,
1521 ext_phy_type,
1522 ext_phy_addr,
1523 MDIO_AN_DEVAD,
1524 MDIO_AN_REG_CL37_FC_LP, &lp_pause);
1525 pause_result = (ld_pause &
1526 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5;
1527 pause_result |= (lp_pause &
1528 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
1529
1530 bnx2x_pause_resolve(vars, pause_result);
1531 DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x \n",
1532 pause_result);
1533 }
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001534 }
1535 return ret;
1536}
1537
1538
1539static void bnx2x_flow_ctrl_resolve(struct link_params *params,
1540 struct link_vars *vars,
1541 u32 gp_status)
1542{
1543 struct bnx2x *bp = params->bp;
Eilon Greenstein3196a882008-08-13 15:58:49 -07001544 u16 ld_pause; /* local driver */
1545 u16 lp_pause; /* link partner */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001546 u16 pause_result;
1547
David S. Millerc0700f92008-12-16 23:53:20 -08001548 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001549
1550 /* resolve from gp_status in case of AN complete and not sgmii */
David S. Millerc0700f92008-12-16 23:53:20 -08001551 if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001552 (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
1553 (!(vars->phy_flags & PHY_SGMII_FLAG)) &&
1554 (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
1555 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) {
1556 CL45_RD_OVER_CL22(bp, params->port,
1557 params->phy_addr,
1558 MDIO_REG_BANK_COMBO_IEEE0,
1559 MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
1560 &ld_pause);
1561 CL45_RD_OVER_CL22(bp, params->port,
1562 params->phy_addr,
1563 MDIO_REG_BANK_COMBO_IEEE0,
1564 MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
1565 &lp_pause);
1566 pause_result = (ld_pause &
1567 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5;
1568 pause_result |= (lp_pause &
1569 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
1570 DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
1571 bnx2x_pause_resolve(vars, pause_result);
David S. Millerc0700f92008-12-16 23:53:20 -08001572 } else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001573 (bnx2x_ext_phy_resove_fc(params, vars))) {
1574 return;
1575 } else {
David S. Millerc0700f92008-12-16 23:53:20 -08001576 if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001577 vars->flow_ctrl = params->req_fc_auto_adv;
1578 else
1579 vars->flow_ctrl = params->req_flow_ctrl;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001580 }
1581 DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);
1582}
1583
1584
1585static u8 bnx2x_link_settings_status(struct link_params *params,
1586 struct link_vars *vars,
1587 u32 gp_status)
1588{
1589 struct bnx2x *bp = params->bp;
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001590 u16 new_line_speed;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001591 u8 rc = 0;
1592 vars->link_status = 0;
1593
1594 if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
1595 DP(NETIF_MSG_LINK, "phy link up gp_status=0x%x\n",
1596 gp_status);
1597
1598 vars->phy_link_up = 1;
1599 vars->link_status |= LINK_STATUS_LINK_UP;
1600
1601 if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
1602 vars->duplex = DUPLEX_FULL;
1603 else
1604 vars->duplex = DUPLEX_HALF;
1605
1606 bnx2x_flow_ctrl_resolve(params, vars, gp_status);
1607
1608 switch (gp_status & GP_STATUS_SPEED_MASK) {
1609 case GP_STATUS_10M:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001610 new_line_speed = SPEED_10;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001611 if (vars->duplex == DUPLEX_FULL)
1612 vars->link_status |= LINK_10TFD;
1613 else
1614 vars->link_status |= LINK_10THD;
1615 break;
1616
1617 case GP_STATUS_100M:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001618 new_line_speed = SPEED_100;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001619 if (vars->duplex == DUPLEX_FULL)
1620 vars->link_status |= LINK_100TXFD;
1621 else
1622 vars->link_status |= LINK_100TXHD;
1623 break;
1624
1625 case GP_STATUS_1G:
1626 case GP_STATUS_1G_KX:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001627 new_line_speed = SPEED_1000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001628 if (vars->duplex == DUPLEX_FULL)
1629 vars->link_status |= LINK_1000TFD;
1630 else
1631 vars->link_status |= LINK_1000THD;
1632 break;
1633
1634 case GP_STATUS_2_5G:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001635 new_line_speed = SPEED_2500;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001636 if (vars->duplex == DUPLEX_FULL)
1637 vars->link_status |= LINK_2500TFD;
1638 else
1639 vars->link_status |= LINK_2500THD;
1640 break;
1641
1642 case GP_STATUS_5G:
1643 case GP_STATUS_6G:
1644 DP(NETIF_MSG_LINK,
1645 "link speed unsupported gp_status 0x%x\n",
1646 gp_status);
1647 return -EINVAL;
1648 break;
1649 case GP_STATUS_10G_KX4:
1650 case GP_STATUS_10G_HIG:
1651 case GP_STATUS_10G_CX4:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001652 new_line_speed = SPEED_10000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001653 vars->link_status |= LINK_10GTFD;
1654 break;
1655
1656 case GP_STATUS_12G_HIG:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001657 new_line_speed = SPEED_12000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001658 vars->link_status |= LINK_12GTFD;
1659 break;
1660
1661 case GP_STATUS_12_5G:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001662 new_line_speed = SPEED_12500;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001663 vars->link_status |= LINK_12_5GTFD;
1664 break;
1665
1666 case GP_STATUS_13G:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001667 new_line_speed = SPEED_13000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001668 vars->link_status |= LINK_13GTFD;
1669 break;
1670
1671 case GP_STATUS_15G:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001672 new_line_speed = SPEED_15000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001673 vars->link_status |= LINK_15GTFD;
1674 break;
1675
1676 case GP_STATUS_16G:
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001677 new_line_speed = SPEED_16000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001678 vars->link_status |= LINK_16GTFD;
1679 break;
1680
1681 default:
1682 DP(NETIF_MSG_LINK,
1683 "link speed unsupported gp_status 0x%x\n",
1684 gp_status);
1685 return -EINVAL;
1686 break;
1687 }
1688
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00001689 /* Upon link speed change set the NIG into drain mode.
1690 Comes to deals with possible FIFO glitch due to clk change
1691 when speed is decreased without link down indicator */
1692 if (new_line_speed != vars->line_speed) {
1693 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
1694 + params->port*4, 0);
1695 msleep(1);
1696 }
1697 vars->line_speed = new_line_speed;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001698 vars->link_status |= LINK_STATUS_SERDES_LINK;
1699
Yaniv Rosner57963ed2008-08-13 15:55:28 -07001700 if ((params->req_line_speed == SPEED_AUTO_NEG) &&
1701 ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
1702 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
1703 (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
Eilon Greenstein589abe32009-02-12 08:36:55 +00001704 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
1705 (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
Eilon Greenstein28577182009-02-12 08:37:00 +00001706 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) ||
1707 (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
1708 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481))) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001709 vars->autoneg = AUTO_NEG_ENABLED;
1710
1711 if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
1712 vars->autoneg |= AUTO_NEG_COMPLETE;
1713 vars->link_status |=
1714 LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
1715 }
1716
1717 vars->autoneg |= AUTO_NEG_PARALLEL_DETECTION_USED;
1718 vars->link_status |=
1719 LINK_STATUS_PARALLEL_DETECTION_USED;
1720
1721 }
David S. Millerc0700f92008-12-16 23:53:20 -08001722 if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001723 vars->link_status |=
1724 LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001725
David S. Millerc0700f92008-12-16 23:53:20 -08001726 if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07001727 vars->link_status |=
1728 LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001729
1730 } else { /* link_down */
1731 DP(NETIF_MSG_LINK, "phy link down\n");
1732
1733 vars->phy_link_up = 0;
Yaniv Rosner57963ed2008-08-13 15:55:28 -07001734
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001735 vars->duplex = DUPLEX_FULL;
David S. Millerc0700f92008-12-16 23:53:20 -08001736 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001737 vars->autoneg = AUTO_NEG_DISABLED;
1738 vars->mac_type = MAC_TYPE_NONE;
1739 }
1740
1741 DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x \n",
1742 gp_status, vars->phy_link_up, vars->line_speed);
1743 DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x"
1744 " autoneg 0x%x\n",
1745 vars->duplex,
1746 vars->flow_ctrl, vars->autoneg);
1747 DP(NETIF_MSG_LINK, "link_status 0x%x\n", vars->link_status);
1748
1749 return rc;
1750}
1751
Eilon Greensteined8680a2009-02-12 08:37:12 +00001752static void bnx2x_set_gmii_tx_driver(struct link_params *params)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001753{
1754 struct bnx2x *bp = params->bp;
1755 u16 lp_up2;
1756 u16 tx_driver;
Eilon Greensteinc2c8b032009-02-12 08:37:14 +00001757 u16 bank;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001758
1759 /* read precomp */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001760 CL45_RD_OVER_CL22(bp, params->port,
1761 params->phy_addr,
1762 MDIO_REG_BANK_OVER_1G,
1763 MDIO_OVER_1G_LP_UP2, &lp_up2);
1764
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001765 /* bits [10:7] at lp_up2, positioned at [15:12] */
1766 lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >>
1767 MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) <<
1768 MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT);
1769
Eilon Greensteinc2c8b032009-02-12 08:37:14 +00001770 if (lp_up2 == 0)
1771 return;
1772
1773 for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3;
1774 bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) {
1775 CL45_RD_OVER_CL22(bp, params->port,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001776 params->phy_addr,
Eilon Greensteinc2c8b032009-02-12 08:37:14 +00001777 bank,
1778 MDIO_TX0_TX_DRIVER, &tx_driver);
1779
1780 /* replace tx_driver bits [15:12] */
1781 if (lp_up2 !=
1782 (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) {
1783 tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK;
1784 tx_driver |= lp_up2;
1785 CL45_WR_OVER_CL22(bp, params->port,
1786 params->phy_addr,
1787 bank,
1788 MDIO_TX0_TX_DRIVER, tx_driver);
1789 }
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001790 }
1791}
1792
1793static u8 bnx2x_emac_program(struct link_params *params,
1794 u32 line_speed, u32 duplex)
1795{
1796 struct bnx2x *bp = params->bp;
1797 u8 port = params->port;
1798 u16 mode = 0;
1799
1800 DP(NETIF_MSG_LINK, "setting link speed & duplex\n");
1801 bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 +
1802 EMAC_REG_EMAC_MODE,
1803 (EMAC_MODE_25G_MODE |
1804 EMAC_MODE_PORT_MII_10M |
1805 EMAC_MODE_HALF_DUPLEX));
1806 switch (line_speed) {
1807 case SPEED_10:
1808 mode |= EMAC_MODE_PORT_MII_10M;
1809 break;
1810
1811 case SPEED_100:
1812 mode |= EMAC_MODE_PORT_MII;
1813 break;
1814
1815 case SPEED_1000:
1816 mode |= EMAC_MODE_PORT_GMII;
1817 break;
1818
1819 case SPEED_2500:
1820 mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII);
1821 break;
1822
1823 default:
1824 /* 10G not valid for EMAC */
1825 DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", line_speed);
1826 return -EINVAL;
1827 }
1828
1829 if (duplex == DUPLEX_HALF)
1830 mode |= EMAC_MODE_HALF_DUPLEX;
1831 bnx2x_bits_en(bp,
1832 GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
1833 mode);
1834
1835 bnx2x_set_led(bp, params->port, LED_MODE_OPER,
1836 line_speed, params->hw_led_mode, params->chip_id);
1837 return 0;
1838}
1839
1840/*****************************************************************************/
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001841/* External Phy section */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001842/*****************************************************************************/
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001843static void bnx2x_hw_reset(struct bnx2x *bp, u8 port)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001844{
1845 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001846 MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001847 msleep(1);
1848 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001849 MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001850}
1851
1852static void bnx2x_ext_phy_reset(struct link_params *params,
1853 struct link_vars *vars)
1854{
1855 struct bnx2x *bp = params->bp;
1856 u32 ext_phy_type;
1857 u8 ext_phy_addr = ((params->ext_phy_config &
1858 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
1859 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
1860 DP(NETIF_MSG_LINK, "Port %x: bnx2x_ext_phy_reset\n", params->port);
1861 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
1862 /* The PHY reset is controled by GPIO 1
1863 * Give it 1ms of reset pulse
1864 */
1865 if (vars->phy_flags & PHY_XGXS_FLAG) {
1866
1867 switch (ext_phy_type) {
1868 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
1869 DP(NETIF_MSG_LINK, "XGXS Direct\n");
1870 break;
1871
1872 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
1873 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
1874 DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
1875
1876 /* Restore normal power mode*/
1877 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001878 MISC_REGISTERS_GPIO_OUTPUT_HIGH,
1879 params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001880
1881 /* HW reset */
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001882 bnx2x_hw_reset(bp, params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001883
1884 bnx2x_cl45_write(bp, params->port,
1885 ext_phy_type,
1886 ext_phy_addr,
1887 MDIO_PMA_DEVAD,
1888 MDIO_PMA_REG_CTRL, 0xa040);
1889 break;
Eilon Greenstein589abe32009-02-12 08:36:55 +00001890 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
1891
1892 /* Restore normal power mode*/
1893 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
1894 MISC_REGISTERS_GPIO_OUTPUT_HIGH,
1895 params->port);
1896
1897 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
1898 MISC_REGISTERS_GPIO_OUTPUT_HIGH,
1899 params->port);
1900
1901 bnx2x_cl45_write(bp, params->port,
1902 ext_phy_type,
1903 ext_phy_addr,
1904 MDIO_PMA_DEVAD,
1905 MDIO_PMA_REG_CTRL,
1906 1<<15);
1907
1908 break;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001909 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
1910 /* Unset Low Power Mode and SW reset */
1911 /* Restore normal power mode*/
1912 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001913 MISC_REGISTERS_GPIO_OUTPUT_HIGH,
1914 params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001915
1916 DP(NETIF_MSG_LINK, "XGXS 8072\n");
1917 bnx2x_cl45_write(bp, params->port,
1918 ext_phy_type,
1919 ext_phy_addr,
1920 MDIO_PMA_DEVAD,
1921 MDIO_PMA_REG_CTRL,
1922 1<<15);
1923 break;
1924 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
1925 {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001926
1927 /* Restore normal power mode*/
1928 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001929 MISC_REGISTERS_GPIO_OUTPUT_HIGH,
1930 params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001931
1932 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001933 MISC_REGISTERS_GPIO_OUTPUT_HIGH,
1934 params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001935
1936 DP(NETIF_MSG_LINK, "XGXS 8073\n");
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001937 }
1938 break;
1939
1940 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
1941 DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
1942
1943 /* Restore normal power mode*/
1944 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001945 MISC_REGISTERS_GPIO_OUTPUT_HIGH,
1946 params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001947
1948 /* HW reset */
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001949 bnx2x_hw_reset(bp, params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001950
1951 break;
1952
Eilon Greenstein28577182009-02-12 08:37:00 +00001953 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
1954
1955 /* Restore normal power mode*/
1956 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
1957 MISC_REGISTERS_GPIO_OUTPUT_HIGH,
1958 params->port);
1959
1960 /* HW reset */
1961 bnx2x_hw_reset(bp, params->port);
1962
1963 bnx2x_cl45_write(bp, params->port,
1964 ext_phy_type,
1965 ext_phy_addr,
1966 MDIO_PMA_DEVAD,
1967 MDIO_PMA_REG_CTRL,
1968 1<<15);
1969 break;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001970 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
1971 DP(NETIF_MSG_LINK, "XGXS PHY Failure detected\n");
1972 break;
1973
1974 default:
1975 DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
1976 params->ext_phy_config);
1977 break;
1978 }
1979
1980 } else { /* SerDes */
1981 ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
1982 switch (ext_phy_type) {
1983 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
1984 DP(NETIF_MSG_LINK, "SerDes Direct\n");
1985 break;
1986
1987 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
1988 DP(NETIF_MSG_LINK, "SerDes 5482\n");
Eilon Greenstein17de50b2008-08-13 15:56:59 -07001989 bnx2x_hw_reset(bp, params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07001990 break;
1991
1992 default:
1993 DP(NETIF_MSG_LINK,
1994 "BAD SerDes ext_phy_config 0x%x\n",
1995 params->ext_phy_config);
1996 break;
1997 }
1998 }
1999}
2000
Eilon Greensteina35da8d2009-02-12 08:37:02 +00002001
2002static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port,
2003 u32 shmem_base, u32 spirom_ver)
2004{
2005 DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x\n",
2006 (u16)(spirom_ver>>16), (u16)spirom_ver);
2007 REG_WR(bp, shmem_base +
2008 offsetof(struct shmem_region,
2009 port_mb[port].ext_phy_fw_version),
2010 spirom_ver);
2011}
2012
2013static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, u8 port,
2014 u32 ext_phy_type, u8 ext_phy_addr,
2015 u32 shmem_base)
2016{
2017 u16 fw_ver1, fw_ver2;
2018 bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD,
2019 MDIO_PMA_REG_ROM_VER1, &fw_ver1);
2020 bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD,
2021 MDIO_PMA_REG_ROM_VER2, &fw_ver2);
2022 bnx2x_save_spirom_version(bp, port, shmem_base,
2023 (u32)(fw_ver1<<16 | fw_ver2));
2024}
2025
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002026static void bnx2x_bcm8072_external_rom_boot(struct link_params *params)
2027{
2028 struct bnx2x *bp = params->bp;
2029 u8 port = params->port;
2030 u8 ext_phy_addr = ((params->ext_phy_config &
2031 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2032 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2033 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002034
2035 /* Need to wait 200ms after reset */
2036 msleep(200);
2037 /* Boot port from external ROM
2038 * Set ser_boot_ctl bit in the MISC_CTRL1 register
2039 */
2040 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2041 MDIO_PMA_DEVAD,
2042 MDIO_PMA_REG_MISC_CTRL1, 0x0001);
2043
2044 /* Reset internal microprocessor */
2045 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2046 MDIO_PMA_DEVAD,
2047 MDIO_PMA_REG_GEN_CTRL,
2048 MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
2049 /* set micro reset = 0 */
2050 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2051 MDIO_PMA_DEVAD,
2052 MDIO_PMA_REG_GEN_CTRL,
2053 MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
2054 /* Reset internal microprocessor */
2055 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2056 MDIO_PMA_DEVAD,
2057 MDIO_PMA_REG_GEN_CTRL,
2058 MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
2059 /* wait for 100ms for code download via SPI port */
2060 msleep(100);
2061
2062 /* Clear ser_boot_ctl bit */
2063 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2064 MDIO_PMA_DEVAD,
2065 MDIO_PMA_REG_MISC_CTRL1, 0x0000);
2066 /* Wait 100ms */
2067 msleep(100);
2068
Eilon Greensteina35da8d2009-02-12 08:37:02 +00002069 bnx2x_save_bcm_spirom_ver(bp, port,
2070 ext_phy_type,
2071 ext_phy_addr,
2072 params->shmem_base);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002073}
2074
2075static u8 bnx2x_8073_is_snr_needed(struct link_params *params)
2076{
2077 /* This is only required for 8073A1, version 102 only */
2078
2079 struct bnx2x *bp = params->bp;
2080 u8 ext_phy_addr = ((params->ext_phy_config &
2081 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2082 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2083 u16 val;
2084
2085 /* Read 8073 HW revision*/
2086 bnx2x_cl45_read(bp, params->port,
2087 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2088 ext_phy_addr,
2089 MDIO_PMA_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00002090 MDIO_PMA_REG_8073_CHIP_REV, &val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002091
2092 if (val != 1) {
2093 /* No need to workaround in 8073 A1 */
2094 return 0;
2095 }
2096
2097 bnx2x_cl45_read(bp, params->port,
2098 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2099 ext_phy_addr,
2100 MDIO_PMA_DEVAD,
2101 MDIO_PMA_REG_ROM_VER2, &val);
2102
2103 /* SNR should be applied only for version 0x102 */
2104 if (val != 0x102)
2105 return 0;
2106
2107 return 1;
2108}
2109
2110static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
2111{
2112 struct bnx2x *bp = params->bp;
2113 u8 ext_phy_addr = ((params->ext_phy_config &
2114 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2115 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2116 u16 val, cnt, cnt1 ;
2117
2118 bnx2x_cl45_read(bp, params->port,
2119 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2120 ext_phy_addr,
2121 MDIO_PMA_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00002122 MDIO_PMA_REG_8073_CHIP_REV, &val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002123
2124 if (val > 0) {
2125 /* No need to workaround in 8073 A1 */
2126 return 0;
2127 }
2128 /* XAUI workaround in 8073 A0: */
2129
2130 /* After loading the boot ROM and restarting Autoneg,
2131 poll Dev1, Reg $C820: */
2132
2133 for (cnt = 0; cnt < 1000; cnt++) {
2134 bnx2x_cl45_read(bp, params->port,
2135 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2136 ext_phy_addr,
2137 MDIO_PMA_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00002138 MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
2139 &val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002140 /* If bit [14] = 0 or bit [13] = 0, continue on with
2141 system initialization (XAUI work-around not required,
2142 as these bits indicate 2.5G or 1G link up). */
2143 if (!(val & (1<<14)) || !(val & (1<<13))) {
2144 DP(NETIF_MSG_LINK, "XAUI work-around not required\n");
2145 return 0;
2146 } else if (!(val & (1<<15))) {
2147 DP(NETIF_MSG_LINK, "clc bit 15 went off\n");
2148 /* If bit 15 is 0, then poll Dev1, Reg $C841 until
2149 it's MSB (bit 15) goes to 1 (indicating that the
2150 XAUI workaround has completed),
2151 then continue on with system initialization.*/
2152 for (cnt1 = 0; cnt1 < 1000; cnt1++) {
2153 bnx2x_cl45_read(bp, params->port,
2154 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2155 ext_phy_addr,
2156 MDIO_PMA_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00002157 MDIO_PMA_REG_8073_XAUI_WA, &val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002158 if (val & (1<<15)) {
2159 DP(NETIF_MSG_LINK,
2160 "XAUI workaround has completed\n");
2161 return 0;
2162 }
2163 msleep(3);
2164 }
2165 break;
2166 }
2167 msleep(3);
2168 }
2169 DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n");
2170 return -EINVAL;
2171
2172}
2173
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002174static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
Eilon Greensteina35da8d2009-02-12 08:37:02 +00002175 u8 ext_phy_addr, u32 shmem_base)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002176{
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002177 /* Boot port from external ROM */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002178 /* EDC grst */
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002179 bnx2x_cl45_write(bp, port,
2180 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2181 ext_phy_addr,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002182 MDIO_PMA_DEVAD,
2183 MDIO_PMA_REG_GEN_CTRL,
2184 0x0001);
2185
2186 /* ucode reboot and rst */
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002187 bnx2x_cl45_write(bp, port,
2188 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2189 ext_phy_addr,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002190 MDIO_PMA_DEVAD,
2191 MDIO_PMA_REG_GEN_CTRL,
2192 0x008c);
2193
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002194 bnx2x_cl45_write(bp, port,
2195 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2196 ext_phy_addr,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002197 MDIO_PMA_DEVAD,
2198 MDIO_PMA_REG_MISC_CTRL1, 0x0001);
2199
2200 /* Reset internal microprocessor */
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002201 bnx2x_cl45_write(bp, port,
2202 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2203 ext_phy_addr,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002204 MDIO_PMA_DEVAD,
2205 MDIO_PMA_REG_GEN_CTRL,
2206 MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
2207
2208 /* Release srst bit */
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002209 bnx2x_cl45_write(bp, port,
2210 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2211 ext_phy_addr,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002212 MDIO_PMA_DEVAD,
2213 MDIO_PMA_REG_GEN_CTRL,
2214 MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
2215
2216 /* wait for 100ms for code download via SPI port */
2217 msleep(100);
2218
2219 /* Clear ser_boot_ctl bit */
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002220 bnx2x_cl45_write(bp, port,
2221 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2222 ext_phy_addr,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002223 MDIO_PMA_DEVAD,
2224 MDIO_PMA_REG_MISC_CTRL1, 0x0000);
2225
Eilon Greensteina35da8d2009-02-12 08:37:02 +00002226 bnx2x_save_bcm_spirom_ver(bp, port,
2227 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2228 ext_phy_addr,
2229 shmem_base);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002230}
2231
Eilon Greenstein589abe32009-02-12 08:36:55 +00002232static void bnx2x_bcm8726_external_rom_boot(struct link_params *params)
2233{
2234 struct bnx2x *bp = params->bp;
2235 u8 port = params->port;
2236 u8 ext_phy_addr = ((params->ext_phy_config &
2237 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2238 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2239 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
2240
2241 /* Need to wait 100ms after reset */
2242 msleep(100);
2243
2244 /* Set serial boot control for external load */
2245 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2246 MDIO_PMA_DEVAD,
2247 MDIO_PMA_REG_MISC_CTRL1, 0x0001);
2248
2249 /* Micro controller re-boot */
2250 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2251 MDIO_PMA_DEVAD,
2252 MDIO_PMA_REG_GEN_CTRL,
2253 MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
2254
2255 /* Set soft reset */
2256 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2257 MDIO_PMA_DEVAD,
2258 MDIO_PMA_REG_GEN_CTRL,
2259 MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
2260
2261 /* Clear soft reset.
2262 Will automatically reset micro-controller re-boot */
2263 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2264 MDIO_PMA_DEVAD,
2265 MDIO_PMA_REG_GEN_CTRL,
2266 MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
2267
2268 /* wait for 100ms for microcode load */
2269 msleep(100);
2270
2271 /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */
2272 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2273 MDIO_PMA_DEVAD,
2274 MDIO_PMA_REG_MISC_CTRL1, 0x0000);
2275
2276 msleep(200);
Eilon Greensteina35da8d2009-02-12 08:37:02 +00002277 bnx2x_save_bcm_spirom_ver(bp, port,
2278 ext_phy_type,
2279 ext_phy_addr,
2280 params->shmem_base);
Eilon Greenstein589abe32009-02-12 08:36:55 +00002281}
2282
2283static void bnx2x_bcm8726_set_transmitter(struct bnx2x *bp, u8 port,
2284 u8 ext_phy_addr, u8 tx_en)
2285{
2286 u16 val;
2287 DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x\n",
2288 tx_en, port);
2289 /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/
2290 bnx2x_cl45_read(bp, port,
2291 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
2292 ext_phy_addr,
2293 MDIO_PMA_DEVAD,
2294 MDIO_PMA_REG_PHY_IDENTIFIER,
2295 &val);
2296
2297 if (tx_en)
2298 val &= ~(1<<15);
2299 else
2300 val |= (1<<15);
2301
2302 bnx2x_cl45_write(bp, port,
2303 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
2304 ext_phy_addr,
2305 MDIO_PMA_DEVAD,
2306 MDIO_PMA_REG_PHY_IDENTIFIER,
2307 val);
2308}
2309
2310
2311static u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr,
2312 u8 byte_cnt, u8 *o_buf) {
2313 struct bnx2x *bp = params->bp;
2314 u16 val, i;
2315 u8 port = params->port;
2316 u8 ext_phy_addr = ((params->ext_phy_config &
2317 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2318 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2319 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
2320 if (byte_cnt > 16) {
2321 DP(NETIF_MSG_LINK, "Reading from eeprom is"
2322 " is limited to 0xf\n");
2323 return -EINVAL;
2324 }
2325 /* Set the read command byte count */
2326 bnx2x_cl45_write(bp, port,
2327 ext_phy_type,
2328 ext_phy_addr,
2329 MDIO_PMA_DEVAD,
2330 MDIO_PMA_REG_8726_TWO_WIRE_BYTE_CNT,
2331 (byte_cnt | 0xa000));
2332
2333 /* Set the read command address */
2334 bnx2x_cl45_write(bp, port,
2335 ext_phy_type,
2336 ext_phy_addr,
2337 MDIO_PMA_DEVAD,
2338 MDIO_PMA_REG_8726_TWO_WIRE_MEM_ADDR,
2339 addr);
2340
2341 /* Activate read command */
2342 bnx2x_cl45_write(bp, port,
2343 ext_phy_type,
2344 ext_phy_addr,
2345 MDIO_PMA_DEVAD,
2346 MDIO_PMA_REG_8726_TWO_WIRE_CTRL,
2347 0x2c0f);
2348
2349 /* Wait up to 500us for command complete status */
2350 for (i = 0; i < 100; i++) {
2351 bnx2x_cl45_read(bp, port,
2352 ext_phy_type,
2353 ext_phy_addr,
2354 MDIO_PMA_DEVAD,
2355 MDIO_PMA_REG_8726_TWO_WIRE_CTRL, &val);
2356 if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) ==
2357 MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE)
2358 break;
2359 udelay(5);
2360 }
2361
2362 if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) !=
2363 MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE) {
2364 DP(NETIF_MSG_LINK,
2365 "Got bad status 0x%x when reading from SFP+ EEPROM\n",
2366 (val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK));
2367 return -EINVAL;
2368 }
2369
2370 /* Read the buffer */
2371 for (i = 0; i < byte_cnt; i++) {
2372 bnx2x_cl45_read(bp, port,
2373 ext_phy_type,
2374 ext_phy_addr,
2375 MDIO_PMA_DEVAD,
2376 MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF + i, &val);
2377 o_buf[i] = (u8)(val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK);
2378 }
2379
2380 for (i = 0; i < 100; i++) {
2381 bnx2x_cl45_read(bp, port,
2382 ext_phy_type,
2383 ext_phy_addr,
2384 MDIO_PMA_DEVAD,
2385 MDIO_PMA_REG_8726_TWO_WIRE_CTRL, &val);
2386 if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) ==
2387 MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IDLE)
2388 return 0;;
2389 msleep(1);
2390 }
2391 return -EINVAL;
2392}
2393
2394
2395static u8 bnx2x_get_sfp_module_type(struct link_params *params,
2396 u8 *module_type)
2397{
2398 struct bnx2x *bp = params->bp;
2399 u8 val;
2400 *module_type = SFP_MODULE_TYPE_UNKNOWN;
2401
2402 /* First check for copper cable */
2403 if (bnx2x_read_sfp_module_eeprom(params,
2404 SFP_EEPROM_CON_TYPE_ADDR,
2405 1,
2406 &val) != 0) {
2407 DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM");
2408 return -EINVAL;
2409 }
2410
2411 switch (val) {
2412 case SFP_EEPROM_CON_TYPE_VAL_COPPER:
2413 {
2414 u8 copper_module_type;
2415 /* Check if its active cable( includes SFP+ module)
2416 of passive cable*/
2417 if (bnx2x_read_sfp_module_eeprom(params,
2418 SFP_EEPROM_FC_TX_TECH_ADDR,
2419 1,
2420 &copper_module_type) !=
2421 0) {
2422 DP(NETIF_MSG_LINK,
2423 "Failed to read copper-cable-type"
2424 " from SFP+ EEPROM\n");
2425 return -EINVAL;
2426 }
2427
2428 if (copper_module_type &
2429 SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) {
2430 DP(NETIF_MSG_LINK, "Active Copper cable detected\n");
2431 *module_type = SFP_MODULE_TYPE_ACTIVE_COPPER_CABLE;
2432 } else if (copper_module_type &
2433 SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
2434 DP(NETIF_MSG_LINK, "Passive Copper"
2435 " cable detected\n");
2436 *module_type =
2437 SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE;
2438 } else {
2439 DP(NETIF_MSG_LINK, "Unknown copper-cable-"
2440 "type 0x%x !!!\n", copper_module_type);
2441 return -EINVAL;
2442 }
2443 break;
2444 }
2445 case SFP_EEPROM_CON_TYPE_VAL_LC:
2446 DP(NETIF_MSG_LINK, "Optic module detected\n");
2447 *module_type = SFP_MODULE_TYPE_LC;
2448 break;
2449
2450 default:
2451 DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n",
2452 val);
2453 return -EINVAL;
2454 }
2455 return 0;
2456}
2457
2458
2459/* This function read the relevant field from the module ( SFP+ ),
2460 and verify it is compliant with this board */
2461static u8 bnx2x_verify_sfp_module(struct link_params *params,
2462 u8 module_type)
2463{
2464 struct bnx2x *bp = params->bp;
2465 u8 *str_p, *tmp_buf;
2466 u16 i;
2467
2468#define COMPLIANCE_STR_CNT 6
2469 u8 *compliance_str[] = {"Broadcom", "JDSU", "Molex Inc", "PICOLIGHT",
2470 "FINISAR CORP. ", "Amphenol"};
2471 u8 buf[SFP_EEPROM_VENDOR_NAME_SIZE];
2472 /* Passive Copper cables are allowed to participate,
2473 since the module is hardwired to the copper cable */
2474
2475 if (!(params->feature_config_flags &
2476 FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED)) {
2477 DP(NETIF_MSG_LINK, "NOT enforcing module verification\n");
2478 return 0;
2479 }
2480
2481 if (module_type != SFP_MODULE_TYPE_LC) {
2482 DP(NETIF_MSG_LINK, "No need to verify copper cable\n");
2483 return 0;
2484 }
2485
2486 /* In case of non copper cable or Active copper cable,
2487 verify that the SFP+ module is compliant with this board*/
2488 if (bnx2x_read_sfp_module_eeprom(params,
2489 SFP_EEPROM_VENDOR_NAME_ADDR,
2490 SFP_EEPROM_VENDOR_NAME_SIZE,
2491 buf) != 0) {
2492 DP(NETIF_MSG_LINK, "Failed to read Vendor-Name from"
2493 " module EEPROM\n");
2494 return -EINVAL;
2495 }
2496 for (i = 0; i < COMPLIANCE_STR_CNT; i++) {
2497 str_p = compliance_str[i];
2498 tmp_buf = buf;
2499 while (*str_p) {
2500 if ((u8)(*tmp_buf) != (u8)(*str_p))
2501 break;
2502 str_p++;
2503 tmp_buf++;
2504 }
2505
2506 if (!(*str_p)) {
2507 DP(NETIF_MSG_LINK, "SFP+ Module verified, "
2508 "index=%x\n", i);
2509 return 0;
2510 }
2511 }
2512 DP(NETIF_MSG_LINK, "Incompliant SFP+ module. Disable module !!!\n");
2513 return -EINVAL;
2514}
2515
2516
2517static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
2518 u8 module_type)
2519{
2520 struct bnx2x *bp = params->bp;
2521 u8 port = params->port;
2522 u8 options[SFP_EEPROM_OPTIONS_SIZE];
2523 u8 limiting_mode;
2524 u8 ext_phy_addr = ((params->ext_phy_config &
2525 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2526 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2527
2528 if (bnx2x_read_sfp_module_eeprom(params,
2529 SFP_EEPROM_OPTIONS_ADDR,
2530 SFP_EEPROM_OPTIONS_SIZE,
2531 options) != 0) {
2532 DP(NETIF_MSG_LINK, "Failed to read Option field from"
2533 " module EEPROM\n");
2534 return -EINVAL;
2535 }
2536 limiting_mode = !(options[0] &
2537 SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK);
2538 if (limiting_mode &&
2539 (module_type != SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE)) {
2540 DP(NETIF_MSG_LINK,
2541 "Module options = 0x%x.Setting LIMITING MODE\n",
2542 options[0]);
2543 bnx2x_cl45_write(bp, port,
2544 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
2545 ext_phy_addr,
2546 MDIO_PMA_DEVAD,
2547 MDIO_PMA_REG_ROM_VER2,
2548 SFP_LIMITING_MODE_VALUE);
2549 } else { /* LRM mode ( default )*/
2550 u16 cur_limiting_mode;
2551 DP(NETIF_MSG_LINK, "Module options = 0x%x.Setting LRM MODE\n",
2552 options[0]);
2553
2554 bnx2x_cl45_read(bp, port,
2555 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
2556 ext_phy_addr,
2557 MDIO_PMA_DEVAD,
2558 MDIO_PMA_REG_ROM_VER2,
2559 &cur_limiting_mode);
2560
2561 /* Changing to LRM mode takes quite few seconds.
2562 So do it only if current mode is limiting
2563 ( default is LRM )*/
2564 if (cur_limiting_mode != SFP_LIMITING_MODE_VALUE)
2565 return 0;
2566
2567 bnx2x_cl45_write(bp, port,
2568 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
2569 ext_phy_addr,
2570 MDIO_PMA_DEVAD,
2571 MDIO_PMA_REG_LRM_MODE,
2572 0);
2573 bnx2x_cl45_write(bp, port,
2574 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
2575 ext_phy_addr,
2576 MDIO_PMA_DEVAD,
2577 MDIO_PMA_REG_ROM_VER2,
2578 0x128);
2579 bnx2x_cl45_write(bp, port,
2580 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
2581 ext_phy_addr,
2582 MDIO_PMA_DEVAD,
2583 MDIO_PMA_REG_MISC_CTRL0,
2584 0x4008);
2585 bnx2x_cl45_write(bp, port,
2586 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
2587 ext_phy_addr,
2588 MDIO_PMA_DEVAD,
2589 MDIO_PMA_REG_LRM_MODE,
2590 0xaaaa);
2591 }
2592 return 0;
2593}
2594
2595static u8 bnx2x_wait_for_sfp_module_initialized(struct link_params *params)
2596{
2597 u8 val;
2598 struct bnx2x *bp = params->bp;
2599 u16 timeout;
2600 /* Initialization time after hot-plug may take up to 300ms for some
2601 phys type ( e.g. JDSU ) */
2602 for (timeout = 0; timeout < 60; timeout++) {
2603 if (bnx2x_read_sfp_module_eeprom(params, 1, 1, &val)
2604 == 0) {
2605 DP(NETIF_MSG_LINK, "SFP+ module initialization "
2606 "took %d ms\n", timeout * 5);
2607 return 0;
2608 }
2609 msleep(5);
2610 }
2611 return -EINVAL;
2612}
2613
2614static u8 bnx2x_sfp_module_detection(struct link_params *params)
2615{
2616 struct bnx2x *bp = params->bp;
2617 u8 module_type;
2618 u8 ext_phy_addr = ((params->ext_phy_config &
2619 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2620 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2621 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
2622
2623 if (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) {
2624 DP(NETIF_MSG_LINK, "Module detection is not required "
2625 "for this phy\n");
2626 return 0;
2627 }
2628
2629 DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n",
2630 params->port);
2631
2632 if (bnx2x_get_sfp_module_type(params,
2633 &module_type) != 0) {
2634 DP(NETIF_MSG_LINK, "Failed to get valid module type\n");
2635 if (!(params->feature_config_flags &
2636 FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED)) {
2637 /* In case module detection is disabled, it trys to
2638 link up. The issue that can happen here is LRM /
2639 LIMITING mode which set according to the module-type*/
2640 DP(NETIF_MSG_LINK, "Unable to read module-type."
2641 "Probably due to Bit Stretching."
2642 " Proceeding...\n");
2643 } else {
2644 return -EINVAL;
2645 }
2646 } else if (bnx2x_verify_sfp_module(params, module_type) !=
2647 0) {
2648 /* check SFP+ module compatibility */
2649 DP(NETIF_MSG_LINK, "Module verification failed!!\n");
2650 /* Turn on fault module-detected led */
2651 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
2652 MISC_REGISTERS_GPIO_HIGH,
2653 params->port);
2654 return -EINVAL;
2655 }
2656
2657 /* Turn off fault module-detected led */
2658 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
2659 MISC_REGISTERS_GPIO_LOW,
2660 params->port);
2661
2662 /* Check and set limiting mode / LRM mode */
2663 if (bnx2x_bcm8726_set_limiting_mode(params, module_type)
2664 != 0) {
2665 DP(NETIF_MSG_LINK, "Setting limiting mode failed!!\n");
2666 return -EINVAL;
2667 }
2668
2669 /* Enable transmit for this module */
2670 bnx2x_bcm8726_set_transmitter(bp, params->port,
2671 ext_phy_addr, 1);
2672 return 0;
2673}
2674
2675void bnx2x_handle_module_detect_int(struct link_params *params)
2676{
2677 struct bnx2x *bp = params->bp;
2678 u32 gpio_val;
2679 u8 port = params->port;
2680 /* Set valid module led off */
2681 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
2682 MISC_REGISTERS_GPIO_HIGH,
2683 params->port);
2684
2685 /* Get current gpio val refelecting module plugged in / out*/
2686 gpio_val = bnx2x_get_gpio(bp, MISC_REGISTERS_GPIO_3, port);
2687
2688 /* Call the handling function in case module is detected */
2689 if (gpio_val == 0) {
2690
2691 bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3,
2692 MISC_REGISTERS_GPIO_INT_OUTPUT_CLR,
2693 port);
2694
2695 if (bnx2x_wait_for_sfp_module_initialized(params)
2696 == 0)
2697 bnx2x_sfp_module_detection(params);
2698 else
2699 DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n");
2700 } else {
2701 u8 ext_phy_addr = ((params->ext_phy_config &
2702 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2703 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2704 bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3,
2705 MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
2706 port);
2707 /* Module was plugged out. */
2708 /* Disable transmit for this module */
2709 bnx2x_bcm8726_set_transmitter(bp, params->port,
2710 ext_phy_addr, 0);
2711 }
2712}
2713
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002714static void bnx2x_bcm807x_force_10G(struct link_params *params)
2715{
2716 struct bnx2x *bp = params->bp;
2717 u8 port = params->port;
2718 u8 ext_phy_addr = ((params->ext_phy_config &
2719 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2720 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2721 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
2722
2723 /* Force KR or KX */
2724 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2725 MDIO_PMA_DEVAD,
2726 MDIO_PMA_REG_CTRL,
2727 0x2040);
2728 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2729 MDIO_PMA_DEVAD,
2730 MDIO_PMA_REG_10G_CTRL2,
2731 0x000b);
2732 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2733 MDIO_PMA_DEVAD,
2734 MDIO_PMA_REG_BCM_CTRL,
2735 0x0000);
2736 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2737 MDIO_AN_DEVAD,
2738 MDIO_AN_REG_CTRL,
2739 0x0000);
2740}
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002741static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
2742{
2743 struct bnx2x *bp = params->bp;
2744 u8 port = params->port;
2745 u16 val;
2746 u8 ext_phy_addr = ((params->ext_phy_config &
2747 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2748 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2749 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
2750
2751 bnx2x_cl45_read(bp, params->port,
2752 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
2753 ext_phy_addr,
2754 MDIO_PMA_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00002755 MDIO_PMA_REG_8073_CHIP_REV, &val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002756
2757 if (val == 0) {
2758 /* Mustn't set low power mode in 8073 A0 */
2759 return;
2760 }
2761
2762 /* Disable PLL sequencer (use read-modify-write to clear bit 13) */
2763 bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
2764 MDIO_XS_DEVAD,
2765 MDIO_XS_PLL_SEQUENCER, &val);
2766 val &= ~(1<<13);
2767 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2768 MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
2769
2770 /* PLL controls */
2771 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2772 MDIO_XS_DEVAD, 0x805E, 0x1077);
2773 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2774 MDIO_XS_DEVAD, 0x805D, 0x0000);
2775 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2776 MDIO_XS_DEVAD, 0x805C, 0x030B);
2777 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2778 MDIO_XS_DEVAD, 0x805B, 0x1240);
2779 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2780 MDIO_XS_DEVAD, 0x805A, 0x2490);
2781
2782 /* Tx Controls */
2783 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2784 MDIO_XS_DEVAD, 0x80A7, 0x0C74);
2785 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2786 MDIO_XS_DEVAD, 0x80A6, 0x9041);
2787 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2788 MDIO_XS_DEVAD, 0x80A5, 0x4640);
2789
2790 /* Rx Controls */
2791 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2792 MDIO_XS_DEVAD, 0x80FE, 0x01C4);
2793 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2794 MDIO_XS_DEVAD, 0x80FD, 0x9249);
2795 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2796 MDIO_XS_DEVAD, 0x80FC, 0x2015);
2797
2798 /* Enable PLL sequencer (use read-modify-write to set bit 13) */
2799 bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
2800 MDIO_XS_DEVAD,
2801 MDIO_XS_PLL_SEQUENCER, &val);
2802 val |= (1<<13);
2803 bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
2804 MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
2805}
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002806
2807static void bnx2x_8073_set_pause_cl37(struct link_params *params,
2808 struct link_vars *vars)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002809{
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002810
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002811 struct bnx2x *bp = params->bp;
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002812 u16 cl37_val;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002813 u8 ext_phy_addr = ((params->ext_phy_config &
2814 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2815 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2816 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
2817
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002818 bnx2x_cl45_read(bp, params->port,
2819 ext_phy_type,
2820 ext_phy_addr,
2821 MDIO_AN_DEVAD,
2822 MDIO_AN_REG_CL37_FC_LD, &cl37_val);
2823
2824 cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
2825 /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
2826
2827 if ((vars->ieee_fc &
2828 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
2829 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
2830 cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
2831 }
2832 if ((vars->ieee_fc &
2833 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
2834 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
2835 cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
2836 }
2837 if ((vars->ieee_fc &
2838 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
2839 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
2840 cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
2841 }
2842 DP(NETIF_MSG_LINK,
2843 "Ext phy AN advertize cl37 0x%x\n", cl37_val);
2844
2845 bnx2x_cl45_write(bp, params->port,
2846 ext_phy_type,
2847 ext_phy_addr,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002848 MDIO_AN_DEVAD,
Yaniv Rosner6bbca912008-08-13 15:57:28 -07002849 MDIO_AN_REG_CL37_FC_LD, cl37_val);
2850 msleep(500);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002851}
2852
2853static void bnx2x_ext_phy_set_pause(struct link_params *params,
2854 struct link_vars *vars)
2855{
2856 struct bnx2x *bp = params->bp;
2857 u16 val;
2858 u8 ext_phy_addr = ((params->ext_phy_config &
2859 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2860 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2861 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
2862
2863 /* read modify write pause advertizing */
2864 bnx2x_cl45_read(bp, params->port,
2865 ext_phy_type,
2866 ext_phy_addr,
2867 MDIO_AN_DEVAD,
2868 MDIO_AN_REG_ADV_PAUSE, &val);
2869
2870 val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07002871
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002872 /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
2873
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07002874 if ((vars->ieee_fc &
2875 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002876 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
2877 val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
2878 }
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07002879 if ((vars->ieee_fc &
2880 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002881 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
2882 val |=
2883 MDIO_AN_REG_ADV_PAUSE_PAUSE;
2884 }
2885 DP(NETIF_MSG_LINK,
2886 "Ext phy AN advertize 0x%x\n", val);
2887 bnx2x_cl45_write(bp, params->port,
2888 ext_phy_type,
2889 ext_phy_addr,
2890 MDIO_AN_DEVAD,
2891 MDIO_AN_REG_ADV_PAUSE, val);
2892}
Eilon Greensteinc2c8b032009-02-12 08:37:14 +00002893static void bnx2x_set_preemphasis(struct link_params *params)
2894{
2895 u16 bank, i = 0;
2896 struct bnx2x *bp = params->bp;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002897
Eilon Greensteinc2c8b032009-02-12 08:37:14 +00002898 for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3;
2899 bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) {
2900 CL45_WR_OVER_CL22(bp, params->port,
2901 params->phy_addr,
2902 bank,
2903 MDIO_RX0_RX_EQ_BOOST,
2904 params->xgxs_config_rx[i]);
2905 }
2906
2907 for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3;
2908 bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) {
2909 CL45_WR_OVER_CL22(bp, params->port,
2910 params->phy_addr,
2911 bank,
2912 MDIO_TX0_TX_DRIVER,
2913 params->xgxs_config_tx[i]);
2914 }
2915}
Yaniv Rosner57963ed2008-08-13 15:55:28 -07002916
2917static void bnx2x_init_internal_phy(struct link_params *params,
2918 struct link_vars *vars)
2919{
2920 struct bnx2x *bp = params->bp;
Yaniv Rosner57963ed2008-08-13 15:55:28 -07002921 if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
Eilon Greensteinc2c8b032009-02-12 08:37:14 +00002922 if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
2923 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
2924 (params->feature_config_flags &
2925 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED))
2926 bnx2x_set_preemphasis(params);
Yaniv Rosner57963ed2008-08-13 15:55:28 -07002927
2928 /* forced speed requested? */
2929 if (vars->line_speed != SPEED_AUTO_NEG) {
2930 DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
2931
2932 /* disable autoneg */
2933 bnx2x_set_autoneg(params, vars);
2934
2935 /* program speed and duplex */
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07002936 bnx2x_program_serdes(params, vars);
Yaniv Rosner57963ed2008-08-13 15:55:28 -07002937
2938 } else { /* AN_mode */
2939 DP(NETIF_MSG_LINK, "not SGMII, AN\n");
2940
2941 /* AN enabled */
2942 bnx2x_set_brcm_cl37_advertisment(params);
2943
2944 /* program duplex & pause advertisement (for aneg) */
2945 bnx2x_set_ieee_aneg_advertisment(params,
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07002946 vars->ieee_fc);
Yaniv Rosner57963ed2008-08-13 15:55:28 -07002947
2948 /* enable autoneg */
2949 bnx2x_set_autoneg(params, vars);
2950
2951 /* enable and restart AN */
2952 bnx2x_restart_autoneg(params);
2953 }
2954
2955 } else { /* SGMII mode */
2956 DP(NETIF_MSG_LINK, "SGMII\n");
2957
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07002958 bnx2x_initialize_sgmii_process(params, vars);
Yaniv Rosner57963ed2008-08-13 15:55:28 -07002959 }
2960}
2961
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07002962static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
2963{
2964 struct bnx2x *bp = params->bp;
2965 u32 ext_phy_type;
2966 u8 ext_phy_addr;
2967 u16 cnt;
2968 u16 ctrl = 0;
2969 u16 val = 0;
2970 u8 rc = 0;
2971 if (vars->phy_flags & PHY_XGXS_FLAG) {
2972 ext_phy_addr = ((params->ext_phy_config &
2973 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
2974 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
2975
2976 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
2977 /* Make sure that the soft reset is off (expect for the 8072:
2978 * due to the lock, it will be done inside the specific
2979 * handling)
2980 */
2981 if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
2982 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
2983 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
2984 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) &&
2985 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073)) {
2986 /* Wait for soft reset to get cleared upto 1 sec */
2987 for (cnt = 0; cnt < 1000; cnt++) {
2988 bnx2x_cl45_read(bp, params->port,
2989 ext_phy_type,
2990 ext_phy_addr,
2991 MDIO_PMA_DEVAD,
2992 MDIO_PMA_REG_CTRL, &ctrl);
2993 if (!(ctrl & (1<<15)))
2994 break;
2995 msleep(1);
2996 }
2997 DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n",
2998 ctrl, cnt);
2999 }
3000
3001 switch (ext_phy_type) {
3002 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003003 break;
3004
3005 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
3006 DP(NETIF_MSG_LINK, "XGXS 8705\n");
3007
3008 bnx2x_cl45_write(bp, params->port,
3009 ext_phy_type,
3010 ext_phy_addr,
3011 MDIO_PMA_DEVAD,
3012 MDIO_PMA_REG_MISC_CTRL,
3013 0x8288);
3014 bnx2x_cl45_write(bp, params->port,
3015 ext_phy_type,
3016 ext_phy_addr,
3017 MDIO_PMA_DEVAD,
3018 MDIO_PMA_REG_PHY_IDENTIFIER,
3019 0x7fbf);
3020 bnx2x_cl45_write(bp, params->port,
3021 ext_phy_type,
3022 ext_phy_addr,
3023 MDIO_PMA_DEVAD,
3024 MDIO_PMA_REG_CMU_PLL_BYPASS,
3025 0x0100);
3026 bnx2x_cl45_write(bp, params->port,
3027 ext_phy_type,
3028 ext_phy_addr,
3029 MDIO_WIS_DEVAD,
3030 MDIO_WIS_REG_LASI_CNTL, 0x1);
Eilon Greensteina35da8d2009-02-12 08:37:02 +00003031
3032 bnx2x_save_bcm_spirom_ver(bp, params->port,
3033 ext_phy_type,
3034 ext_phy_addr,
3035 params->shmem_base);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003036 break;
3037
3038 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
Eilon Greensteina35da8d2009-02-12 08:37:02 +00003039 /* Wait until fw is loaded */
3040 for (cnt = 0; cnt < 100; cnt++) {
3041 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3042 ext_phy_addr, MDIO_PMA_DEVAD,
3043 MDIO_PMA_REG_ROM_VER1, &val);
3044 if (val)
3045 break;
3046 msleep(10);
3047 }
3048 DP(NETIF_MSG_LINK, "XGXS 8706 is initialized "
3049 "after %d ms\n", cnt);
Eilon Greensteinc2c8b032009-02-12 08:37:14 +00003050 if ((params->feature_config_flags &
3051 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
3052 u8 i;
3053 u16 reg;
3054 for (i = 0; i < 4; i++) {
3055 reg = MDIO_XS_8706_REG_BANK_RX0 +
3056 i*(MDIO_XS_8706_REG_BANK_RX1 -
3057 MDIO_XS_8706_REG_BANK_RX0);
3058 bnx2x_cl45_read(bp, params->port,
3059 ext_phy_type,
3060 ext_phy_addr,
3061 MDIO_XS_DEVAD,
3062 reg, &val);
3063 /* Clear first 3 bits of the control */
3064 val &= ~0x7;
3065 /* Set control bits according to
3066 configuation */
3067 val |= (params->xgxs_config_rx[i] &
3068 0x7);
3069 DP(NETIF_MSG_LINK, "Setting RX"
3070 "Equalizer to BCM8706 reg 0x%x"
3071 " <-- val 0x%x\n", reg, val);
3072 bnx2x_cl45_write(bp, params->port,
3073 ext_phy_type,
3074 ext_phy_addr,
3075 MDIO_XS_DEVAD,
3076 reg, val);
3077 }
3078 }
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003079 /* Force speed */
3080 /* First enable LASI */
3081 bnx2x_cl45_write(bp, params->port,
3082 ext_phy_type,
3083 ext_phy_addr,
3084 MDIO_PMA_DEVAD,
3085 MDIO_PMA_REG_RX_ALARM_CTRL,
3086 0x0400);
3087 bnx2x_cl45_write(bp, params->port,
3088 ext_phy_type,
3089 ext_phy_addr,
3090 MDIO_PMA_DEVAD,
3091 MDIO_PMA_REG_LASI_CTRL, 0x0004);
3092
3093 if (params->req_line_speed == SPEED_10000) {
3094 DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n");
3095
3096 bnx2x_cl45_write(bp, params->port,
3097 ext_phy_type,
3098 ext_phy_addr,
3099 MDIO_PMA_DEVAD,
3100 MDIO_PMA_REG_DIGITAL_CTRL,
3101 0x400);
3102 } else {
3103 /* Force 1Gbps using autoneg with 1G
3104 advertisment */
3105
3106 /* Allow CL37 through CL73 */
3107 DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
3108 bnx2x_cl45_write(bp, params->port,
3109 ext_phy_type,
3110 ext_phy_addr,
3111 MDIO_AN_DEVAD,
3112 MDIO_AN_REG_CL37_CL73,
3113 0x040c);
3114
3115 /* Enable Full-Duplex advertisment on CL37 */
3116 bnx2x_cl45_write(bp, params->port,
3117 ext_phy_type,
3118 ext_phy_addr,
3119 MDIO_AN_DEVAD,
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07003120 MDIO_AN_REG_CL37_FC_LP,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003121 0x0020);
3122 /* Enable CL37 AN */
3123 bnx2x_cl45_write(bp, params->port,
3124 ext_phy_type,
3125 ext_phy_addr,
3126 MDIO_AN_DEVAD,
3127 MDIO_AN_REG_CL37_AN,
3128 0x1000);
3129 /* 1G support */
3130 bnx2x_cl45_write(bp, params->port,
3131 ext_phy_type,
3132 ext_phy_addr,
3133 MDIO_AN_DEVAD,
3134 MDIO_AN_REG_ADV, (1<<5));
3135
3136 /* Enable clause 73 AN */
3137 bnx2x_cl45_write(bp, params->port,
3138 ext_phy_type,
3139 ext_phy_addr,
3140 MDIO_AN_DEVAD,
3141 MDIO_AN_REG_CTRL,
3142 0x1200);
3143
3144 }
Eilon Greensteina35da8d2009-02-12 08:37:02 +00003145 bnx2x_save_bcm_spirom_ver(bp, params->port,
3146 ext_phy_type,
3147 ext_phy_addr,
3148 params->shmem_base);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003149 break;
Eilon Greenstein589abe32009-02-12 08:36:55 +00003150 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
3151 DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
3152 bnx2x_bcm8726_external_rom_boot(params);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003153
Eilon Greenstein589abe32009-02-12 08:36:55 +00003154 /* Need to call module detected on initialization since
3155 the module detection triggered by actual module
3156 insertion might occur before driver is loaded, and when
3157 driver is loaded, it reset all registers, including the
3158 transmitter */
3159 bnx2x_sfp_module_detection(params);
3160 if (params->req_line_speed == SPEED_1000) {
3161 DP(NETIF_MSG_LINK, "Setting 1G force\n");
3162 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3163 ext_phy_addr, MDIO_PMA_DEVAD,
3164 MDIO_PMA_REG_CTRL, 0x40);
3165 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3166 ext_phy_addr, MDIO_PMA_DEVAD,
3167 MDIO_PMA_REG_10G_CTRL2, 0xD);
3168 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3169 ext_phy_addr, MDIO_PMA_DEVAD,
3170 MDIO_PMA_REG_LASI_CTRL, 0x5);
3171 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3172 ext_phy_addr, MDIO_PMA_DEVAD,
3173 MDIO_PMA_REG_RX_ALARM_CTRL,
3174 0x400);
3175 } else if ((params->req_line_speed ==
3176 SPEED_AUTO_NEG) &&
3177 ((params->speed_cap_mask &
3178 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) {
3179 DP(NETIF_MSG_LINK, "Setting 1G clause37 \n");
3180 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3181 ext_phy_addr, MDIO_AN_DEVAD,
3182 MDIO_AN_REG_ADV, 0x20);
3183 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3184 ext_phy_addr, MDIO_AN_DEVAD,
3185 MDIO_AN_REG_CL37_CL73, 0x040c);
3186 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3187 ext_phy_addr, MDIO_AN_DEVAD,
3188 MDIO_AN_REG_CL37_FC_LD, 0x0020);
3189 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3190 ext_phy_addr, MDIO_AN_DEVAD,
3191 MDIO_AN_REG_CL37_AN, 0x1000);
3192 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3193 ext_phy_addr, MDIO_AN_DEVAD,
3194 MDIO_AN_REG_CTRL, 0x1200);
3195
3196 /* Enable RX-ALARM control to receive
3197 interrupt for 1G speed change */
3198 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3199 ext_phy_addr, MDIO_PMA_DEVAD,
3200 MDIO_PMA_REG_LASI_CTRL, 0x4);
3201 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3202 ext_phy_addr, MDIO_PMA_DEVAD,
3203 MDIO_PMA_REG_RX_ALARM_CTRL,
3204 0x400);
3205
3206 } else { /* Default 10G. Set only LASI control */
3207 bnx2x_cl45_write(bp, params->port, ext_phy_type,
3208 ext_phy_addr, MDIO_PMA_DEVAD,
3209 MDIO_PMA_REG_LASI_CTRL, 1);
3210 }
Eilon Greensteinc2c8b032009-02-12 08:37:14 +00003211
3212 /* Set TX PreEmphasis if needed */
3213 if ((params->feature_config_flags &
3214 FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
3215 DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
3216 "TX_CTRL2 0x%x\n",
3217 params->xgxs_config_tx[0],
3218 params->xgxs_config_tx[1]);
3219 bnx2x_cl45_write(bp, params->port,
3220 ext_phy_type,
3221 ext_phy_addr,
3222 MDIO_PMA_DEVAD,
3223 MDIO_PMA_REG_8726_TX_CTRL1,
3224 params->xgxs_config_tx[0]);
3225
3226 bnx2x_cl45_write(bp, params->port,
3227 ext_phy_type,
3228 ext_phy_addr,
3229 MDIO_PMA_DEVAD,
3230 MDIO_PMA_REG_8726_TX_CTRL2,
3231 params->xgxs_config_tx[1]);
3232 }
Eilon Greenstein589abe32009-02-12 08:36:55 +00003233 break;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003234 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
3235 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
3236 {
3237 u16 tmp1;
3238 u16 rx_alarm_ctrl_val;
3239 u16 lasi_ctrl_val;
3240 if (ext_phy_type ==
3241 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
3242 rx_alarm_ctrl_val = 0x400;
3243 lasi_ctrl_val = 0x0004;
3244 } else {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003245 rx_alarm_ctrl_val = (1<<2);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003246 lasi_ctrl_val = 0x0004;
3247 }
3248
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003249 /* enable LASI */
3250 bnx2x_cl45_write(bp, params->port,
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003251 ext_phy_type,
3252 ext_phy_addr,
3253 MDIO_PMA_DEVAD,
3254 MDIO_PMA_REG_RX_ALARM_CTRL,
3255 rx_alarm_ctrl_val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003256
3257 bnx2x_cl45_write(bp, params->port,
3258 ext_phy_type,
3259 ext_phy_addr,
3260 MDIO_PMA_DEVAD,
3261 MDIO_PMA_REG_LASI_CTRL,
3262 lasi_ctrl_val);
3263
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003264 bnx2x_8073_set_pause_cl37(params, vars);
3265
3266 if (ext_phy_type ==
3267 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){
3268 bnx2x_bcm8072_external_rom_boot(params);
3269 } else {
3270
3271 /* In case of 8073 with long xaui lines,
3272 don't set the 8073 xaui low power*/
3273 bnx2x_bcm8073_set_xaui_low_power_mode(params);
3274 }
3275
3276 bnx2x_cl45_read(bp, params->port,
3277 ext_phy_type,
3278 ext_phy_addr,
3279 MDIO_PMA_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003280 MDIO_PMA_REG_M8051_MSGOUT_REG,
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003281 &tmp1);
3282
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003283 bnx2x_cl45_read(bp, params->port,
3284 ext_phy_type,
3285 ext_phy_addr,
3286 MDIO_PMA_DEVAD,
3287 MDIO_PMA_REG_RX_ALARM, &tmp1);
3288
3289 DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1):"
3290 "0x%x\n", tmp1);
3291
3292 /* If this is forced speed, set to KR or KX
3293 * (all other are not supported)
3294 */
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003295 if (params->loopback_mode == LOOPBACK_EXT) {
3296 bnx2x_bcm807x_force_10G(params);
3297 DP(NETIF_MSG_LINK,
3298 "Forced speed 10G on 807X\n");
3299 break;
3300 } else {
3301 bnx2x_cl45_write(bp, params->port,
3302 ext_phy_type, ext_phy_addr,
3303 MDIO_PMA_DEVAD,
3304 MDIO_PMA_REG_BCM_CTRL,
3305 0x0002);
3306 }
3307 if (params->req_line_speed != SPEED_AUTO_NEG) {
3308 if (params->req_line_speed == SPEED_10000) {
3309 val = (1<<7);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003310 } else if (params->req_line_speed ==
3311 SPEED_2500) {
3312 val = (1<<5);
3313 /* Note that 2.5G works only
3314 when used with 1G advertisment */
3315 } else
3316 val = (1<<5);
3317 } else {
3318
3319 val = 0;
3320 if (params->speed_cap_mask &
3321 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
3322 val |= (1<<7);
3323
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003324 /* Note that 2.5G works only when
3325 used with 1G advertisment */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003326 if (params->speed_cap_mask &
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003327 (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
3328 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003329 val |= (1<<5);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003330 DP(NETIF_MSG_LINK,
3331 "807x autoneg val = 0x%x\n", val);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003332 }
3333
3334 bnx2x_cl45_write(bp, params->port,
3335 ext_phy_type,
3336 ext_phy_addr,
3337 MDIO_AN_DEVAD,
3338 MDIO_AN_REG_ADV, val);
3339
3340 if (ext_phy_type ==
3341 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003342
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003343 bnx2x_cl45_read(bp, params->port,
3344 ext_phy_type,
3345 ext_phy_addr,
3346 MDIO_AN_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003347 MDIO_AN_REG_8073_2_5G, &tmp1);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003348
3349 if (((params->speed_cap_mask &
3350 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
3351 (params->req_line_speed ==
3352 SPEED_AUTO_NEG)) ||
3353 (params->req_line_speed ==
3354 SPEED_2500)) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003355 u16 phy_ver;
3356 /* Allow 2.5G for A1 and above */
3357 bnx2x_cl45_read(bp, params->port,
3358 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
3359 ext_phy_addr,
3360 MDIO_PMA_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003361 MDIO_PMA_REG_8073_CHIP_REV, &phy_ver);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003362 DP(NETIF_MSG_LINK, "Add 2.5G\n");
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003363 if (phy_ver > 0)
3364 tmp1 |= 1;
3365 else
3366 tmp1 &= 0xfffe;
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003367 } else {
3368 DP(NETIF_MSG_LINK, "Disable 2.5G\n");
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003369 tmp1 &= 0xfffe;
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003370 }
3371
3372 bnx2x_cl45_write(bp, params->port,
3373 ext_phy_type,
3374 ext_phy_addr,
3375 MDIO_AN_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003376 MDIO_AN_REG_8073_2_5G, tmp1);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003377 }
3378
3379 /* Add support for CL37 (passive mode) II */
3380
3381 bnx2x_cl45_read(bp, params->port,
3382 ext_phy_type,
3383 ext_phy_addr,
3384 MDIO_AN_DEVAD,
3385 MDIO_AN_REG_CL37_FC_LD,
3386 &tmp1);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003387
3388 bnx2x_cl45_write(bp, params->port,
3389 ext_phy_type,
3390 ext_phy_addr,
3391 MDIO_AN_DEVAD,
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003392 MDIO_AN_REG_CL37_FC_LD, (tmp1 |
3393 ((params->req_duplex == DUPLEX_FULL) ?
3394 0x20 : 0x40)));
3395
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003396 /* Add support for CL37 (passive mode) III */
3397 bnx2x_cl45_write(bp, params->port,
3398 ext_phy_type,
3399 ext_phy_addr,
3400 MDIO_AN_DEVAD,
3401 MDIO_AN_REG_CL37_AN, 0x1000);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003402
3403 if (ext_phy_type ==
3404 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003405 /* The SNR will improve about 2db by changing
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003406 BW and FEE main tap. Rest commands are executed
3407 after link is up*/
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003408 /*Change FFE main cursor to 5 in EDC register*/
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003409 if (bnx2x_8073_is_snr_needed(params))
3410 bnx2x_cl45_write(bp, params->port,
3411 ext_phy_type,
3412 ext_phy_addr,
3413 MDIO_PMA_DEVAD,
3414 MDIO_PMA_REG_EDC_FFE_MAIN,
3415 0xFB0C);
3416
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003417 /* Enable FEC (Forware Error Correction)
3418 Request in the AN */
3419 bnx2x_cl45_read(bp, params->port,
3420 ext_phy_type,
3421 ext_phy_addr,
3422 MDIO_AN_DEVAD,
3423 MDIO_AN_REG_ADV2, &tmp1);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003424
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003425 tmp1 |= (1<<15);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003426
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003427 bnx2x_cl45_write(bp, params->port,
3428 ext_phy_type,
3429 ext_phy_addr,
3430 MDIO_AN_DEVAD,
3431 MDIO_AN_REG_ADV2, tmp1);
3432
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003433 }
3434
3435 bnx2x_ext_phy_set_pause(params, vars);
3436
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003437 /* Restart autoneg */
3438 msleep(500);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003439 bnx2x_cl45_write(bp, params->port,
3440 ext_phy_type,
3441 ext_phy_addr,
3442 MDIO_AN_DEVAD,
3443 MDIO_AN_REG_CTRL, 0x1200);
3444 DP(NETIF_MSG_LINK, "807x Autoneg Restart: "
3445 "Advertise 1G=%x, 10G=%x\n",
3446 ((val & (1<<5)) > 0),
3447 ((val & (1<<7)) > 0));
3448 break;
3449 }
3450 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
Eilon Greensteina35da8d2009-02-12 08:37:02 +00003451 {
3452 u16 fw_ver1, fw_ver2;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003453 DP(NETIF_MSG_LINK,
3454 "Setting the SFX7101 LASI indication\n");
3455
3456 bnx2x_cl45_write(bp, params->port,
3457 ext_phy_type,
3458 ext_phy_addr,
3459 MDIO_PMA_DEVAD,
3460 MDIO_PMA_REG_LASI_CTRL, 0x1);
3461 DP(NETIF_MSG_LINK,
3462 "Setting the SFX7101 LED to blink on traffic\n");
3463 bnx2x_cl45_write(bp, params->port,
3464 ext_phy_type,
3465 ext_phy_addr,
3466 MDIO_PMA_DEVAD,
3467 MDIO_PMA_REG_7107_LED_CNTL, (1<<3));
3468
3469 bnx2x_ext_phy_set_pause(params, vars);
3470 /* Restart autoneg */
3471 bnx2x_cl45_read(bp, params->port,
3472 ext_phy_type,
3473 ext_phy_addr,
3474 MDIO_AN_DEVAD,
3475 MDIO_AN_REG_CTRL, &val);
3476 val |= 0x200;
3477 bnx2x_cl45_write(bp, params->port,
3478 ext_phy_type,
3479 ext_phy_addr,
3480 MDIO_AN_DEVAD,
3481 MDIO_AN_REG_CTRL, val);
Eilon Greenstein28577182009-02-12 08:37:00 +00003482
Eilon Greensteina35da8d2009-02-12 08:37:02 +00003483 /* Save spirom version */
3484 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3485 ext_phy_addr, MDIO_PMA_DEVAD,
3486 MDIO_PMA_REG_7101_VER1, &fw_ver1);
3487
3488 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3489 ext_phy_addr, MDIO_PMA_DEVAD,
3490 MDIO_PMA_REG_7101_VER2, &fw_ver2);
3491
3492 bnx2x_save_spirom_version(params->bp, params->port,
3493 params->shmem_base,
3494 (u32)(fw_ver1<<16 | fw_ver2));
3495
Eilon Greenstein28577182009-02-12 08:37:00 +00003496 break;
Eilon Greensteina35da8d2009-02-12 08:37:02 +00003497 }
Eilon Greenstein28577182009-02-12 08:37:00 +00003498 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
3499 DP(NETIF_MSG_LINK,
3500 "Setting the BCM8481 LASI control\n");
3501
3502 bnx2x_cl45_write(bp, params->port,
3503 ext_phy_type,
3504 ext_phy_addr,
3505 MDIO_PMA_DEVAD,
3506 MDIO_PMA_REG_LASI_CTRL, 0x1);
3507
3508 /* Restart autoneg */
3509 bnx2x_cl45_read(bp, params->port,
3510 ext_phy_type,
3511 ext_phy_addr,
3512 MDIO_AN_DEVAD,
3513 MDIO_AN_REG_CTRL, &val);
3514 val |= 0x200;
3515 bnx2x_cl45_write(bp, params->port,
3516 ext_phy_type,
3517 ext_phy_addr,
3518 MDIO_AN_DEVAD,
3519 MDIO_AN_REG_CTRL, val);
3520
Eilon Greensteina35da8d2009-02-12 08:37:02 +00003521 bnx2x_save_bcm_spirom_ver(bp, params->port,
3522 ext_phy_type,
3523 ext_phy_addr,
3524 params->shmem_base);
3525
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003526 break;
3527 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
3528 DP(NETIF_MSG_LINK,
3529 "XGXS PHY Failure detected 0x%x\n",
3530 params->ext_phy_config);
3531 rc = -EINVAL;
3532 break;
3533 default:
3534 DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
3535 params->ext_phy_config);
3536 rc = -EINVAL;
3537 break;
3538 }
3539
3540 } else { /* SerDes */
Yaniv Rosner57963ed2008-08-13 15:55:28 -07003541
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003542 ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
3543 switch (ext_phy_type) {
3544 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
3545 DP(NETIF_MSG_LINK, "SerDes Direct\n");
3546 break;
3547
3548 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
3549 DP(NETIF_MSG_LINK, "SerDes 5482\n");
3550 break;
3551
3552 default:
3553 DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
3554 params->ext_phy_config);
3555 break;
3556 }
3557 }
3558 return rc;
3559}
3560
3561
3562static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07003563 struct link_vars *vars)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003564{
3565 struct bnx2x *bp = params->bp;
3566 u32 ext_phy_type;
3567 u8 ext_phy_addr;
3568 u16 val1 = 0, val2;
3569 u16 rx_sd, pcs_status;
3570 u8 ext_phy_link_up = 0;
3571 u8 port = params->port;
3572 if (vars->phy_flags & PHY_XGXS_FLAG) {
3573 ext_phy_addr = ((params->ext_phy_config &
3574 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
3575 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
3576
3577 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
3578 switch (ext_phy_type) {
3579 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
3580 DP(NETIF_MSG_LINK, "XGXS Direct\n");
3581 ext_phy_link_up = 1;
3582 break;
3583
3584 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
3585 DP(NETIF_MSG_LINK, "XGXS 8705\n");
3586 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3587 ext_phy_addr,
3588 MDIO_WIS_DEVAD,
3589 MDIO_WIS_REG_LASI_STATUS, &val1);
3590 DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
3591
3592 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3593 ext_phy_addr,
3594 MDIO_WIS_DEVAD,
3595 MDIO_WIS_REG_LASI_STATUS, &val1);
3596 DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
3597
3598 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3599 ext_phy_addr,
3600 MDIO_PMA_DEVAD,
3601 MDIO_PMA_REG_RX_SD, &rx_sd);
3602 DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
3603 ext_phy_link_up = (rx_sd & 0x1);
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07003604 if (ext_phy_link_up)
3605 vars->line_speed = SPEED_10000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003606 break;
3607
3608 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
Eilon Greenstein589abe32009-02-12 08:36:55 +00003609 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
3610 DP(NETIF_MSG_LINK, "XGXS 8706/8726\n");
3611 /* Clear RX Alarm*/
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003612 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3613 ext_phy_addr,
Eilon Greenstein589abe32009-02-12 08:36:55 +00003614 MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM,
3615 &val2);
3616 /* clear LASI indication*/
3617 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3618 ext_phy_addr,
3619 MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS,
3620 &val1);
3621 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3622 ext_phy_addr,
3623 MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS,
3624 &val2);
3625 DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x-->"
3626 "0x%x\n", val1, val2);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003627
3628 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3629 ext_phy_addr,
Eilon Greenstein589abe32009-02-12 08:36:55 +00003630 MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD,
3631 &rx_sd);
3632 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3633 ext_phy_addr,
3634 MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS,
3635 &pcs_status);
3636 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3637 ext_phy_addr,
3638 MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS,
3639 &val2);
3640 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3641 ext_phy_addr,
3642 MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS,
3643 &val2);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003644
Eilon Greenstein589abe32009-02-12 08:36:55 +00003645 DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x"
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003646 " pcs_status 0x%x 1Gbps link_status 0x%x\n",
3647 rx_sd, pcs_status, val2);
3648 /* link is up if both bit 0 of pmd_rx_sd and
3649 * bit 0 of pcs_status are set, or if the autoneg bit
3650 1 is set
3651 */
3652 ext_phy_link_up = ((rx_sd & pcs_status & 0x1) ||
3653 (val2 & (1<<1)));
Yaniv Rosner57963ed2008-08-13 15:55:28 -07003654 if (ext_phy_link_up) {
Eilon Greenstein589abe32009-02-12 08:36:55 +00003655 if (ext_phy_type ==
3656 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) {
3657 /* If transmitter is disabled,
3658 ignore false link up indication */
3659 bnx2x_cl45_read(bp, params->port,
3660 ext_phy_type,
3661 ext_phy_addr,
3662 MDIO_PMA_DEVAD,
3663 MDIO_PMA_REG_PHY_IDENTIFIER,
3664 &val1);
3665 if (val1 & (1<<15)) {
3666 DP(NETIF_MSG_LINK, "Tx is "
3667 "disabled\n");
3668 ext_phy_link_up = 0;
3669 break;
3670 }
3671 }
3672
Yaniv Rosner57963ed2008-08-13 15:55:28 -07003673 if (val2 & (1<<1))
3674 vars->line_speed = SPEED_1000;
3675 else
3676 vars->line_speed = SPEED_10000;
3677 }
3678
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003679 break;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003680 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
3681 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
3682 {
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003683 u16 link_status = 0;
3684 u16 an1000_status = 0;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003685 if (ext_phy_type ==
3686 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
3687 bnx2x_cl45_read(bp, params->port,
3688 ext_phy_type,
3689 ext_phy_addr,
3690 MDIO_PCS_DEVAD,
3691 MDIO_PCS_REG_LASI_STATUS, &val1);
3692 bnx2x_cl45_read(bp, params->port,
3693 ext_phy_type,
3694 ext_phy_addr,
3695 MDIO_PCS_DEVAD,
3696 MDIO_PCS_REG_LASI_STATUS, &val2);
3697 DP(NETIF_MSG_LINK,
3698 "870x LASI status 0x%x->0x%x\n",
3699 val1, val2);
3700
3701 } else {
3702 /* In 8073, port1 is directed through emac0 and
3703 * port0 is directed through emac1
3704 */
3705 bnx2x_cl45_read(bp, params->port,
3706 ext_phy_type,
3707 ext_phy_addr,
3708 MDIO_PMA_DEVAD,
3709 MDIO_PMA_REG_LASI_STATUS, &val1);
3710
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003711 DP(NETIF_MSG_LINK,
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003712 "8703 LASI status 0x%x\n",
3713 val1);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003714 }
3715
3716 /* clear the interrupt LASI status register */
3717 bnx2x_cl45_read(bp, params->port,
3718 ext_phy_type,
3719 ext_phy_addr,
3720 MDIO_PCS_DEVAD,
3721 MDIO_PCS_REG_STATUS, &val2);
3722 bnx2x_cl45_read(bp, params->port,
3723 ext_phy_type,
3724 ext_phy_addr,
3725 MDIO_PCS_DEVAD,
3726 MDIO_PCS_REG_STATUS, &val1);
3727 DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n",
3728 val2, val1);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003729 /* Clear MSG-OUT */
3730 bnx2x_cl45_read(bp, params->port,
3731 ext_phy_type,
3732 ext_phy_addr,
3733 MDIO_PMA_DEVAD,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003734 MDIO_PMA_REG_M8051_MSGOUT_REG,
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003735 &val1);
3736
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003737 /* Check the LASI */
3738 bnx2x_cl45_read(bp, params->port,
3739 ext_phy_type,
3740 ext_phy_addr,
3741 MDIO_PMA_DEVAD,
3742 MDIO_PMA_REG_RX_ALARM, &val2);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003743
3744 DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
3745
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003746 /* Check the link status */
3747 bnx2x_cl45_read(bp, params->port,
3748 ext_phy_type,
3749 ext_phy_addr,
3750 MDIO_PCS_DEVAD,
3751 MDIO_PCS_REG_STATUS, &val2);
3752 DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
3753
3754 bnx2x_cl45_read(bp, params->port,
3755 ext_phy_type,
3756 ext_phy_addr,
3757 MDIO_PMA_DEVAD,
3758 MDIO_PMA_REG_STATUS, &val2);
3759 bnx2x_cl45_read(bp, params->port,
3760 ext_phy_type,
3761 ext_phy_addr,
3762 MDIO_PMA_DEVAD,
3763 MDIO_PMA_REG_STATUS, &val1);
3764 ext_phy_link_up = ((val1 & 4) == 4);
3765 DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);
3766 if (ext_phy_type ==
3767 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003768
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003769 if (ext_phy_link_up &&
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003770 ((params->req_line_speed !=
3771 SPEED_10000))) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003772 if (bnx2x_bcm8073_xaui_wa(params)
3773 != 0) {
3774 ext_phy_link_up = 0;
3775 break;
3776 }
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003777 }
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003778 bnx2x_cl45_read(bp, params->port,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003779 ext_phy_type,
3780 ext_phy_addr,
3781 MDIO_AN_DEVAD,
3782 MDIO_AN_REG_LINK_STATUS,
3783 &an1000_status);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003784 bnx2x_cl45_read(bp, params->port,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003785 ext_phy_type,
3786 ext_phy_addr,
3787 MDIO_AN_DEVAD,
3788 MDIO_AN_REG_LINK_STATUS,
3789 &an1000_status);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003790
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003791 /* Check the link status on 1.1.2 */
3792 bnx2x_cl45_read(bp, params->port,
3793 ext_phy_type,
3794 ext_phy_addr,
3795 MDIO_PMA_DEVAD,
3796 MDIO_PMA_REG_STATUS, &val2);
3797 bnx2x_cl45_read(bp, params->port,
3798 ext_phy_type,
3799 ext_phy_addr,
3800 MDIO_PMA_DEVAD,
3801 MDIO_PMA_REG_STATUS, &val1);
3802 DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x,"
3803 "an_link_status=0x%x\n",
3804 val2, val1, an1000_status);
3805
Eilon Greenstein356e2382009-02-12 08:38:32 +00003806 ext_phy_link_up = (((val1 & 4) == 4) ||
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003807 (an1000_status & (1<<1)));
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003808 if (ext_phy_link_up &&
3809 bnx2x_8073_is_snr_needed(params)) {
3810 /* The SNR will improve about 2dbby
3811 changing the BW and FEE main tap.*/
3812
3813 /* The 1st write to change FFE main
3814 tap is set before restart AN */
3815 /* Change PLL Bandwidth in EDC
3816 register */
3817 bnx2x_cl45_write(bp, port, ext_phy_type,
3818 ext_phy_addr,
3819 MDIO_PMA_DEVAD,
3820 MDIO_PMA_REG_PLL_BANDWIDTH,
3821 0x26BC);
3822
3823 /* Change CDR Bandwidth in EDC
3824 register */
3825 bnx2x_cl45_write(bp, port, ext_phy_type,
3826 ext_phy_addr,
3827 MDIO_PMA_DEVAD,
3828 MDIO_PMA_REG_CDR_BANDWIDTH,
3829 0x0333);
3830
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003831
3832 }
3833 bnx2x_cl45_read(bp, params->port,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003834 ext_phy_type,
3835 ext_phy_addr,
3836 MDIO_PMA_DEVAD,
3837 MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
3838 &link_status);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003839
3840 /* Bits 0..2 --> speed detected,
3841 bits 13..15--> link is down */
3842 if ((link_status & (1<<2)) &&
3843 (!(link_status & (1<<15)))) {
3844 ext_phy_link_up = 1;
3845 vars->line_speed = SPEED_10000;
3846 DP(NETIF_MSG_LINK,
3847 "port %x: External link"
3848 " up in 10G\n", params->port);
3849 } else if ((link_status & (1<<1)) &&
3850 (!(link_status & (1<<14)))) {
3851 ext_phy_link_up = 1;
3852 vars->line_speed = SPEED_2500;
3853 DP(NETIF_MSG_LINK,
3854 "port %x: External link"
3855 " up in 2.5G\n", params->port);
3856 } else if ((link_status & (1<<0)) &&
3857 (!(link_status & (1<<13)))) {
3858 ext_phy_link_up = 1;
3859 vars->line_speed = SPEED_1000;
3860 DP(NETIF_MSG_LINK,
3861 "port %x: External link"
3862 " up in 1G\n", params->port);
3863 } else {
3864 ext_phy_link_up = 0;
3865 DP(NETIF_MSG_LINK,
3866 "port %x: External link"
3867 " is down\n", params->port);
3868 }
3869 } else {
3870 /* See if 1G link is up for the 8072 */
3871 bnx2x_cl45_read(bp, params->port,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003872 ext_phy_type,
3873 ext_phy_addr,
3874 MDIO_AN_DEVAD,
3875 MDIO_AN_REG_LINK_STATUS,
3876 &an1000_status);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003877 bnx2x_cl45_read(bp, params->port,
Eilon Greenstein052a38e2009-02-12 08:37:16 +00003878 ext_phy_type,
3879 ext_phy_addr,
3880 MDIO_AN_DEVAD,
3881 MDIO_AN_REG_LINK_STATUS,
3882 &an1000_status);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003883 if (an1000_status & (1<<1)) {
3884 ext_phy_link_up = 1;
3885 vars->line_speed = SPEED_1000;
3886 DP(NETIF_MSG_LINK,
3887 "port %x: External link"
3888 " up in 1G\n", params->port);
3889 } else if (ext_phy_link_up) {
3890 ext_phy_link_up = 1;
3891 vars->line_speed = SPEED_10000;
3892 DP(NETIF_MSG_LINK,
3893 "port %x: External link"
3894 " up in 10G\n", params->port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003895 }
3896 }
Yaniv Rosner6bbca912008-08-13 15:57:28 -07003897
3898
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003899 break;
3900 }
3901 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
3902 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3903 ext_phy_addr,
3904 MDIO_PMA_DEVAD,
3905 MDIO_PMA_REG_LASI_STATUS, &val2);
3906 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3907 ext_phy_addr,
3908 MDIO_PMA_DEVAD,
3909 MDIO_PMA_REG_LASI_STATUS, &val1);
3910 DP(NETIF_MSG_LINK,
3911 "10G-base-T LASI status 0x%x->0x%x\n",
3912 val2, val1);
3913 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3914 ext_phy_addr,
3915 MDIO_PMA_DEVAD,
3916 MDIO_PMA_REG_STATUS, &val2);
3917 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3918 ext_phy_addr,
3919 MDIO_PMA_DEVAD,
3920 MDIO_PMA_REG_STATUS, &val1);
3921 DP(NETIF_MSG_LINK,
3922 "10G-base-T PMA status 0x%x->0x%x\n",
3923 val2, val1);
3924 ext_phy_link_up = ((val1 & 4) == 4);
3925 /* if link is up
3926 * print the AN outcome of the SFX7101 PHY
3927 */
3928 if (ext_phy_link_up) {
3929 bnx2x_cl45_read(bp, params->port,
3930 ext_phy_type,
3931 ext_phy_addr,
3932 MDIO_AN_DEVAD,
3933 MDIO_AN_REG_MASTER_STATUS,
3934 &val2);
Yaniv Rosner57963ed2008-08-13 15:55:28 -07003935 vars->line_speed = SPEED_10000;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003936 DP(NETIF_MSG_LINK,
3937 "SFX7101 AN status 0x%x->Master=%x\n",
3938 val2,
3939 (val2 & (1<<14)));
3940 }
3941 break;
Eilon Greenstein28577182009-02-12 08:37:00 +00003942 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
3943 /* Clear LASI interrupt */
3944 bnx2x_cl45_read(bp, params->port,
3945 ext_phy_type,
3946 ext_phy_addr,
3947 MDIO_PMA_DEVAD,
3948 MDIO_PMA_REG_LASI_STATUS, &val1);
3949 DP(NETIF_MSG_LINK, "8481 LASI status reg = 0x%x\n",
3950 val1);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003951
Eilon Greenstein28577182009-02-12 08:37:00 +00003952 /* Check 10G-BaseT link status */
3953 /* Check Global PMD signal ok */
3954 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3955 ext_phy_addr,
3956 MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD,
3957 &rx_sd);
3958 /* Check PCS block lock */
3959 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3960 ext_phy_addr,
3961 MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS,
3962 &pcs_status);
3963 DP(NETIF_MSG_LINK, "8481 1.a = 0x%x, 1.20 = 0x%x\n",
3964 rx_sd, pcs_status);
3965 if (rx_sd & pcs_status & 0x1) {
3966 vars->line_speed = SPEED_10000;
3967 ext_phy_link_up = 1;
3968 } else {
3969
3970 /* Check 1000-BaseT link status */
3971 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3972 ext_phy_addr,
3973 MDIO_AN_DEVAD, 0xFFE1,
3974 &val1);
3975
3976 bnx2x_cl45_read(bp, params->port, ext_phy_type,
3977 ext_phy_addr,
3978 MDIO_AN_DEVAD, 0xFFE1,
3979 &val2);
3980 DP(NETIF_MSG_LINK, "8481 7.FFE1 ="
3981 "0x%x-->0x%x\n", val1, val2);
3982 if (val2 & (1<<2)) {
3983 vars->line_speed = SPEED_1000;
3984 ext_phy_link_up = 1;
3985 }
3986 }
3987
3988 break;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07003989 default:
3990 DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
3991 params->ext_phy_config);
3992 ext_phy_link_up = 0;
3993 break;
3994 }
3995
3996 } else { /* SerDes */
3997 ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
3998 switch (ext_phy_type) {
3999 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
4000 DP(NETIF_MSG_LINK, "SerDes Direct\n");
4001 ext_phy_link_up = 1;
4002 break;
4003
4004 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
4005 DP(NETIF_MSG_LINK, "SerDes 5482\n");
4006 ext_phy_link_up = 1;
4007 break;
4008
4009 default:
4010 DP(NETIF_MSG_LINK,
4011 "BAD SerDes ext_phy_config 0x%x\n",
4012 params->ext_phy_config);
4013 ext_phy_link_up = 0;
4014 break;
4015 }
4016 }
4017
4018 return ext_phy_link_up;
4019}
4020
4021static void bnx2x_link_int_enable(struct link_params *params)
4022{
4023 u8 port = params->port;
4024 u32 ext_phy_type;
4025 u32 mask;
4026 struct bnx2x *bp = params->bp;
4027 /* setting the status to report on link up
4028 for either XGXS or SerDes */
4029
4030 if (params->switch_cfg == SWITCH_CFG_10G) {
4031 mask = (NIG_MASK_XGXS0_LINK10G |
4032 NIG_MASK_XGXS0_LINK_STATUS);
4033 DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
4034 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
4035 if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
4036 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
4037 (ext_phy_type !=
4038 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
4039 mask |= NIG_MASK_MI_INT;
4040 DP(NETIF_MSG_LINK, "enabled external phy int\n");
4041 }
4042
4043 } else { /* SerDes */
4044 mask = NIG_MASK_SERDES0_LINK_STATUS;
4045 DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
4046 ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
4047 if ((ext_phy_type !=
4048 PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
4049 (ext_phy_type !=
4050 PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
4051 mask |= NIG_MASK_MI_INT;
4052 DP(NETIF_MSG_LINK, "enabled external phy int\n");
4053 }
4054 }
4055 bnx2x_bits_en(bp,
4056 NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
4057 mask);
4058 DP(NETIF_MSG_LINK, "port %x, is_xgxs=%x, int_status 0x%x\n", port,
4059 (params->switch_cfg == SWITCH_CFG_10G),
4060 REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
4061
4062 DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n",
4063 REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
4064 REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
4065 REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS+port*0x3c));
4066 DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",
4067 REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
4068 REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
4069}
4070
4071
4072/*
4073 * link management
4074 */
4075static void bnx2x_link_int_ack(struct link_params *params,
Eilon Greenstein3196a882008-08-13 15:58:49 -07004076 struct link_vars *vars, u8 is_10g)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004077{
4078 struct bnx2x *bp = params->bp;
4079 u8 port = params->port;
4080
4081 /* first reset all status
4082 * we assume only one line will be change at a time */
4083 bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
4084 (NIG_STATUS_XGXS0_LINK10G |
4085 NIG_STATUS_XGXS0_LINK_STATUS |
4086 NIG_STATUS_SERDES0_LINK_STATUS));
4087 if (vars->phy_link_up) {
4088 if (is_10g) {
4089 /* Disable the 10G link interrupt
4090 * by writing 1 to the status register
4091 */
4092 DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
4093 bnx2x_bits_en(bp,
4094 NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
4095 NIG_STATUS_XGXS0_LINK10G);
4096
4097 } else if (params->switch_cfg == SWITCH_CFG_10G) {
4098 /* Disable the link interrupt
4099 * by writing 1 to the relevant lane
4100 * in the status register
4101 */
4102 u32 ser_lane = ((params->lane_config &
4103 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
4104 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
4105
4106 DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
4107 bnx2x_bits_en(bp,
4108 NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
4109 ((1 << ser_lane) <<
4110 NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
4111
4112 } else { /* SerDes */
4113 DP(NETIF_MSG_LINK, "SerDes phy link up\n");
4114 /* Disable the link interrupt
4115 * by writing 1 to the status register
4116 */
4117 bnx2x_bits_en(bp,
4118 NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
4119 NIG_STATUS_SERDES0_LINK_STATUS);
4120 }
4121
4122 } else { /* link_down */
4123 }
4124}
4125
4126static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
4127{
4128 u8 *str_ptr = str;
4129 u32 mask = 0xf0000000;
4130 u8 shift = 8*4;
4131 u8 digit;
4132 if (len < 10) {
Frederik Schwarzer025dfda2008-10-16 19:02:37 +02004133 /* Need more than 10chars for this format */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004134 *str_ptr = '\0';
4135 return -EINVAL;
4136 }
4137 while (shift > 0) {
4138
4139 shift -= 4;
4140 digit = ((num & mask) >> shift);
4141 if (digit < 0xa)
4142 *str_ptr = digit + '0';
4143 else
4144 *str_ptr = digit - 0xa + 'a';
4145 str_ptr++;
4146 mask = mask >> 4;
4147 if (shift == 4*4) {
4148 *str_ptr = ':';
4149 str_ptr++;
4150 }
4151 }
4152 *str_ptr = '\0';
4153 return 0;
4154}
4155
4156
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004157static void bnx2x_turn_on_ef(struct bnx2x *bp, u8 port, u8 ext_phy_addr,
4158 u32 ext_phy_type)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004159{
4160 u32 cnt = 0;
4161 u16 ctrl = 0;
4162 /* Enable EMAC0 in to enable MDIO */
4163 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
4164 (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
4165 msleep(5);
4166
4167 /* take ext phy out of reset */
4168 bnx2x_set_gpio(bp,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07004169 MISC_REGISTERS_GPIO_2,
4170 MISC_REGISTERS_GPIO_HIGH,
4171 port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004172
4173 bnx2x_set_gpio(bp,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07004174 MISC_REGISTERS_GPIO_1,
4175 MISC_REGISTERS_GPIO_HIGH,
4176 port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004177
4178 /* wait for 5ms */
4179 msleep(5);
4180
4181 for (cnt = 0; cnt < 1000; cnt++) {
4182 msleep(1);
4183 bnx2x_cl45_read(bp, port,
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004184 ext_phy_type,
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004185 ext_phy_addr,
4186 MDIO_PMA_DEVAD,
4187 MDIO_PMA_REG_CTRL,
Eilon Greenstein356e2382009-02-12 08:38:32 +00004188 &ctrl);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004189 if (!(ctrl & (1<<15))) {
4190 DP(NETIF_MSG_LINK, "Reset completed\n\n");
4191 break;
4192 }
4193 }
4194}
4195
Eilon Greenstein17de50b2008-08-13 15:56:59 -07004196static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004197{
4198 /* put sf to reset */
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004199 bnx2x_set_gpio(bp,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07004200 MISC_REGISTERS_GPIO_1,
4201 MISC_REGISTERS_GPIO_LOW,
4202 port);
4203 bnx2x_set_gpio(bp,
4204 MISC_REGISTERS_GPIO_2,
4205 MISC_REGISTERS_GPIO_LOW,
4206 port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004207}
4208
4209u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
4210 u8 *version, u16 len)
4211{
4212 struct bnx2x *bp = params->bp;
4213 u32 ext_phy_type = 0;
Eilon Greensteina35da8d2009-02-12 08:37:02 +00004214 u32 spirom_ver = 0;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004215 u8 status = 0 ;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004216
4217 if (version == NULL || params == NULL)
4218 return -EINVAL;
4219
Eilon Greensteina35da8d2009-02-12 08:37:02 +00004220 spirom_ver = REG_RD(bp, params->shmem_base +
4221 offsetof(struct shmem_region,
4222 port_mb[params->port].ext_phy_fw_version));
4223
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004224 /* reset the returned value to zero */
4225 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004226 switch (ext_phy_type) {
4227 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
4228
4229 if (len < 5)
4230 return -EINVAL;
4231
Eilon Greensteina35da8d2009-02-12 08:37:02 +00004232 version[0] = (spirom_ver & 0xFF);
4233 version[1] = (spirom_ver & 0xFF00) >> 8;
4234 version[2] = (spirom_ver & 0xFF0000) >> 16;
4235 version[3] = (spirom_ver & 0xFF000000) >> 24;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004236 version[4] = '\0';
4237
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004238 break;
4239 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
4240 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004241 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
4242 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
Eilon Greenstein589abe32009-02-12 08:36:55 +00004243 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
Eilon Greensteina35da8d2009-02-12 08:37:02 +00004244 status = bnx2x_format_ver(spirom_ver, version, len);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004245 break;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004246 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
4247 break;
4248
4249 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
4250 DP(NETIF_MSG_LINK, "bnx2x_get_ext_phy_fw_version:"
4251 " type is FAILURE!\n");
4252 status = -EINVAL;
4253 break;
4254
4255 default:
4256 break;
4257 }
4258 return status;
4259}
4260
4261static void bnx2x_set_xgxs_loopback(struct link_params *params,
4262 struct link_vars *vars,
4263 u8 is_10g)
4264{
4265 u8 port = params->port;
4266 struct bnx2x *bp = params->bp;
4267
4268 if (is_10g) {
Eilon Greenstein6378c022008-08-13 15:59:25 -07004269 u32 md_devad;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004270
4271 DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
4272
4273 /* change the uni_phy_addr in the nig */
4274 md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD +
4275 port*0x18));
4276
4277 REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5);
4278
4279 bnx2x_cl45_write(bp, port, 0,
4280 params->phy_addr,
4281 5,
4282 (MDIO_REG_BANK_AER_BLOCK +
4283 (MDIO_AER_BLOCK_AER_REG & 0xf)),
4284 0x2800);
4285
4286 bnx2x_cl45_write(bp, port, 0,
4287 params->phy_addr,
4288 5,
4289 (MDIO_REG_BANK_CL73_IEEEB0 +
4290 (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
4291 0x6041);
Eilon Greenstein38582762009-01-14 06:44:16 +00004292 msleep(200);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004293 /* set aer mmd back */
4294 bnx2x_set_aer_mmd(params, vars);
4295
4296 /* and md_devad */
4297 REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18,
4298 md_devad);
4299
4300 } else {
4301 u16 mii_control;
4302
4303 DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n");
4304
4305 CL45_RD_OVER_CL22(bp, port,
4306 params->phy_addr,
4307 MDIO_REG_BANK_COMBO_IEEE0,
4308 MDIO_COMBO_IEEE0_MII_CONTROL,
4309 &mii_control);
4310
4311 CL45_WR_OVER_CL22(bp, port,
4312 params->phy_addr,
4313 MDIO_REG_BANK_COMBO_IEEE0,
4314 MDIO_COMBO_IEEE0_MII_CONTROL,
4315 (mii_control |
4316 MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK));
4317 }
4318}
4319
4320
4321static void bnx2x_ext_phy_loopback(struct link_params *params)
4322{
4323 struct bnx2x *bp = params->bp;
4324 u8 ext_phy_addr;
4325 u32 ext_phy_type;
4326
4327 if (params->switch_cfg == SWITCH_CFG_10G) {
4328 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
4329 /* CL37 Autoneg Enabled */
4330 ext_phy_addr = ((params->ext_phy_config &
4331 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
4332 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
4333 switch (ext_phy_type) {
4334 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
4335 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
4336 DP(NETIF_MSG_LINK,
4337 "ext_phy_loopback: We should not get here\n");
4338 break;
4339 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
4340 DP(NETIF_MSG_LINK, "ext_phy_loopback: 8705\n");
4341 break;
4342 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
4343 DP(NETIF_MSG_LINK, "ext_phy_loopback: 8706\n");
4344 break;
Eilon Greenstein589abe32009-02-12 08:36:55 +00004345 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
4346 DP(NETIF_MSG_LINK, "PMA/PMD ext_phy_loopback: 8726\n");
4347 bnx2x_cl45_write(bp, params->port, ext_phy_type,
4348 ext_phy_addr,
4349 MDIO_PMA_DEVAD,
4350 MDIO_PMA_REG_CTRL,
4351 0x0001);
4352 break;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004353 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
4354 /* SFX7101_XGXS_TEST1 */
4355 bnx2x_cl45_write(bp, params->port, ext_phy_type,
4356 ext_phy_addr,
4357 MDIO_XS_DEVAD,
4358 MDIO_XS_SFX7101_XGXS_TEST1,
4359 0x100);
4360 DP(NETIF_MSG_LINK,
4361 "ext_phy_loopback: set ext phy loopback\n");
4362 break;
4363 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
4364
4365 break;
4366 } /* switch external PHY type */
4367 } else {
4368 /* serdes */
4369 ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
4370 ext_phy_addr = (params->ext_phy_config &
4371 PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK)
4372 >> PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT;
4373 }
4374}
4375
4376
4377/*
4378 *------------------------------------------------------------------------
4379 * bnx2x_override_led_value -
4380 *
4381 * Override the led value of the requsted led
4382 *
4383 *------------------------------------------------------------------------
4384 */
4385u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port,
4386 u32 led_idx, u32 value)
4387{
4388 u32 reg_val;
4389
4390 /* If port 0 then use EMAC0, else use EMAC1*/
4391 u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
4392
4393 DP(NETIF_MSG_LINK,
4394 "bnx2x_override_led_value() port %x led_idx %d value %d\n",
4395 port, led_idx, value);
4396
4397 switch (led_idx) {
4398 case 0: /* 10MB led */
4399 /* Read the current value of the LED register in
4400 the EMAC block */
4401 reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
4402 /* Set the OVERRIDE bit to 1 */
4403 reg_val |= EMAC_LED_OVERRIDE;
4404 /* If value is 1, set the 10M_OVERRIDE bit,
4405 otherwise reset it.*/
4406 reg_val = (value == 1) ? (reg_val | EMAC_LED_10MB_OVERRIDE) :
4407 (reg_val & ~EMAC_LED_10MB_OVERRIDE);
4408 REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
4409 break;
4410 case 1: /*100MB led */
4411 /*Read the current value of the LED register in
4412 the EMAC block */
4413 reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
4414 /* Set the OVERRIDE bit to 1 */
4415 reg_val |= EMAC_LED_OVERRIDE;
4416 /* If value is 1, set the 100M_OVERRIDE bit,
4417 otherwise reset it.*/
4418 reg_val = (value == 1) ? (reg_val | EMAC_LED_100MB_OVERRIDE) :
4419 (reg_val & ~EMAC_LED_100MB_OVERRIDE);
4420 REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
4421 break;
4422 case 2: /* 1000MB led */
4423 /* Read the current value of the LED register in the
4424 EMAC block */
4425 reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
4426 /* Set the OVERRIDE bit to 1 */
4427 reg_val |= EMAC_LED_OVERRIDE;
4428 /* If value is 1, set the 1000M_OVERRIDE bit, otherwise
4429 reset it. */
4430 reg_val = (value == 1) ? (reg_val | EMAC_LED_1000MB_OVERRIDE) :
4431 (reg_val & ~EMAC_LED_1000MB_OVERRIDE);
4432 REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
4433 break;
4434 case 3: /* 2500MB led */
4435 /* Read the current value of the LED register in the
4436 EMAC block*/
4437 reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
4438 /* Set the OVERRIDE bit to 1 */
4439 reg_val |= EMAC_LED_OVERRIDE;
4440 /* If value is 1, set the 2500M_OVERRIDE bit, otherwise
4441 reset it.*/
4442 reg_val = (value == 1) ? (reg_val | EMAC_LED_2500MB_OVERRIDE) :
4443 (reg_val & ~EMAC_LED_2500MB_OVERRIDE);
4444 REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
4445 break;
4446 case 4: /*10G led */
4447 if (port == 0) {
4448 REG_WR(bp, NIG_REG_LED_10G_P0,
4449 value);
4450 } else {
4451 REG_WR(bp, NIG_REG_LED_10G_P1,
4452 value);
4453 }
4454 break;
4455 case 5: /* TRAFFIC led */
4456 /* Find if the traffic control is via BMAC or EMAC */
4457 if (port == 0)
4458 reg_val = REG_RD(bp, NIG_REG_NIG_EMAC0_EN);
4459 else
4460 reg_val = REG_RD(bp, NIG_REG_NIG_EMAC1_EN);
4461
4462 /* Override the traffic led in the EMAC:*/
4463 if (reg_val == 1) {
4464 /* Read the current value of the LED register in
4465 the EMAC block */
4466 reg_val = REG_RD(bp, emac_base +
4467 EMAC_REG_EMAC_LED);
4468 /* Set the TRAFFIC_OVERRIDE bit to 1 */
4469 reg_val |= EMAC_LED_OVERRIDE;
4470 /* If value is 1, set the TRAFFIC bit, otherwise
4471 reset it.*/
4472 reg_val = (value == 1) ? (reg_val | EMAC_LED_TRAFFIC) :
4473 (reg_val & ~EMAC_LED_TRAFFIC);
4474 REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
4475 } else { /* Override the traffic led in the BMAC: */
4476 REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
4477 + port*4, 1);
4478 REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4,
4479 value);
4480 }
4481 break;
4482 default:
4483 DP(NETIF_MSG_LINK,
4484 "bnx2x_override_led_value() unknown led index %d "
4485 "(should be 0-5)\n", led_idx);
4486 return -EINVAL;
4487 }
4488
4489 return 0;
4490}
4491
4492
4493u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
4494 u16 hw_led_mode, u32 chip_id)
4495{
4496 u8 rc = 0;
Eilon Greenstein345b5d52008-08-13 15:58:12 -07004497 u32 tmp;
4498 u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004499 DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
4500 DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
4501 speed, hw_led_mode);
4502 switch (mode) {
4503 case LED_MODE_OFF:
4504 REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0);
4505 REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
4506 SHARED_HW_CFG_LED_MAC1);
Eilon Greenstein345b5d52008-08-13 15:58:12 -07004507
4508 tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
Eilon Greenstein3196a882008-08-13 15:58:49 -07004509 EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004510 break;
4511
4512 case LED_MODE_OPER:
4513 REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
4514 REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 +
4515 port*4, 0);
4516 /* Set blinking rate to ~15.9Hz */
4517 REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4,
4518 LED_BLINK_RATE_VAL);
4519 REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
4520 port*4, 1);
Eilon Greenstein345b5d52008-08-13 15:58:12 -07004521 tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
Eilon Greenstein3196a882008-08-13 15:58:49 -07004522 EMAC_WR(bp, EMAC_REG_EMAC_LED,
Eilon Greenstein345b5d52008-08-13 15:58:12 -07004523 (tmp & (~EMAC_LED_OVERRIDE)));
4524
Eilon Greenstein34f80b02008-06-23 20:33:01 -07004525 if (!CHIP_IS_E1H(bp) &&
4526 ((speed == SPEED_2500) ||
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004527 (speed == SPEED_1000) ||
4528 (speed == SPEED_100) ||
4529 (speed == SPEED_10))) {
4530 /* On Everest 1 Ax chip versions for speeds less than
4531 10G LED scheme is different */
4532 REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
4533 + port*4, 1);
4534 REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 +
4535 port*4, 0);
4536 REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 +
4537 port*4, 1);
4538 }
4539 break;
4540
4541 default:
4542 rc = -EINVAL;
4543 DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n",
4544 mode);
4545 break;
4546 }
4547 return rc;
4548
4549}
4550
4551u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars)
4552{
4553 struct bnx2x *bp = params->bp;
4554 u16 gp_status = 0;
4555
4556 CL45_RD_OVER_CL22(bp, params->port,
4557 params->phy_addr,
4558 MDIO_REG_BANK_GP_STATUS,
4559 MDIO_GP_STATUS_TOP_AN_STATUS1,
4560 &gp_status);
4561 /* link is up only if both local phy and external phy are up */
4562 if ((gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) &&
4563 bnx2x_ext_phy_is_link_up(params, vars))
4564 return 0;
4565
4566 return -ESRCH;
4567}
4568
4569static u8 bnx2x_link_initialize(struct link_params *params,
4570 struct link_vars *vars)
4571{
4572 struct bnx2x *bp = params->bp;
4573 u8 port = params->port;
4574 u8 rc = 0;
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004575 u8 non_ext_phy;
4576 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004577 /* Activate the external PHY */
4578 bnx2x_ext_phy_reset(params, vars);
4579
4580 bnx2x_set_aer_mmd(params, vars);
4581
4582 if (vars->phy_flags & PHY_XGXS_FLAG)
4583 bnx2x_set_master_ln(params);
4584
4585 rc = bnx2x_reset_unicore(params);
4586 /* reset the SerDes and wait for reset bit return low */
4587 if (rc != 0)
4588 return rc;
4589
4590 bnx2x_set_aer_mmd(params, vars);
4591
4592 /* setting the masterLn_def again after the reset */
4593 if (vars->phy_flags & PHY_XGXS_FLAG) {
4594 bnx2x_set_master_ln(params);
4595 bnx2x_set_swap_lanes(params);
4596 }
4597
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004598 if (vars->phy_flags & PHY_XGXS_FLAG) {
Eilon Greenstein44722d12009-01-14 06:44:21 +00004599 if ((params->req_line_speed &&
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004600 ((params->req_line_speed == SPEED_100) ||
Eilon Greenstein44722d12009-01-14 06:44:21 +00004601 (params->req_line_speed == SPEED_10))) ||
4602 (!params->req_line_speed &&
4603 (params->speed_cap_mask >=
4604 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
4605 (params->speed_cap_mask <
4606 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
4607 )) {
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004608 vars->phy_flags |= PHY_SGMII_FLAG;
4609 } else {
4610 vars->phy_flags &= ~PHY_SGMII_FLAG;
4611 }
4612 }
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004613 /* In case of external phy existance, the line speed would be the
4614 line speed linked up by the external phy. In case it is direct only,
4615 then the line_speed during initialization will be equal to the
4616 req_line_speed*/
4617 vars->line_speed = params->req_line_speed;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004618
Yaniv Rosner8c99e7b2008-08-13 15:56:17 -07004619 bnx2x_calc_ieee_aneg_adv(params, &vars->ieee_fc);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004620
4621 /* init ext phy and enable link state int */
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004622 non_ext_phy = ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
4623 (params->loopback_mode == LOOPBACK_XGXS_10) ||
4624 (params->loopback_mode == LOOPBACK_EXT_PHY));
4625
4626 if (non_ext_phy ||
Eilon Greenstein589abe32009-02-12 08:36:55 +00004627 (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
Eilon Greenstein28577182009-02-12 08:37:00 +00004628 (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) ||
4629 (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481)) {
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004630 if (params->req_line_speed == SPEED_AUTO_NEG)
4631 bnx2x_set_parallel_detection(params, vars->phy_flags);
4632 bnx2x_init_internal_phy(params, vars);
4633 }
4634
4635 if (!non_ext_phy)
4636 rc |= bnx2x_ext_phy_init(params, vars);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004637
4638 bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004639 (NIG_STATUS_XGXS0_LINK10G |
4640 NIG_STATUS_XGXS0_LINK_STATUS |
4641 NIG_STATUS_SERDES0_LINK_STATUS));
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004642
4643 return rc;
4644
4645}
4646
4647
4648u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
4649{
4650 struct bnx2x *bp = params->bp;
4651
4652 u32 val;
Eilon Greenstein3196a882008-08-13 15:58:49 -07004653 DP(NETIF_MSG_LINK, "Phy Initialization started \n");
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004654 DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n",
4655 params->req_line_speed, params->req_flow_ctrl);
4656 vars->link_status = 0;
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004657 vars->phy_link_up = 0;
4658 vars->link_up = 0;
4659 vars->line_speed = 0;
4660 vars->duplex = DUPLEX_FULL;
David S. Millerc0700f92008-12-16 23:53:20 -08004661 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004662 vars->mac_type = MAC_TYPE_NONE;
4663
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004664 if (params->switch_cfg == SWITCH_CFG_1G)
4665 vars->phy_flags = PHY_SERDES_FLAG;
4666 else
4667 vars->phy_flags = PHY_XGXS_FLAG;
4668
Eilon Greenstein3196a882008-08-13 15:58:49 -07004669
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004670 /* disable attentions */
4671 bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
4672 (NIG_MASK_XGXS0_LINK_STATUS |
4673 NIG_MASK_XGXS0_LINK10G |
4674 NIG_MASK_SERDES0_LINK_STATUS |
4675 NIG_MASK_MI_INT));
4676
4677 bnx2x_emac_init(params, vars);
4678
4679 if (CHIP_REV_IS_FPGA(bp)) {
4680 vars->link_up = 1;
4681 vars->line_speed = SPEED_10000;
4682 vars->duplex = DUPLEX_FULL;
David S. Millerc0700f92008-12-16 23:53:20 -08004683 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004684 vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
Eilon Greenstein34f80b02008-06-23 20:33:01 -07004685 /* enable on E1.5 FPGA */
4686 if (CHIP_IS_E1H(bp)) {
4687 vars->flow_ctrl |=
David S. Millerc0700f92008-12-16 23:53:20 -08004688 (BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX);
Eilon Greenstein34f80b02008-06-23 20:33:01 -07004689 vars->link_status |=
4690 (LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
4691 LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
4692 }
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004693
4694 bnx2x_emac_enable(params, vars, 0);
4695 bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed);
4696 /* disable drain */
4697 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
4698 + params->port*4, 0);
4699
4700 /* update shared memory */
4701 bnx2x_update_mng(params, vars->link_status);
4702
4703 return 0;
4704
4705 } else
4706 if (CHIP_REV_IS_EMUL(bp)) {
4707
4708 vars->link_up = 1;
4709 vars->line_speed = SPEED_10000;
4710 vars->duplex = DUPLEX_FULL;
David S. Millerc0700f92008-12-16 23:53:20 -08004711 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004712 vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
4713
4714 bnx2x_bmac_enable(params, vars, 0);
4715
4716 bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed);
4717 /* Disable drain */
4718 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
4719 + params->port*4, 0);
4720
4721 /* update shared memory */
4722 bnx2x_update_mng(params, vars->link_status);
4723
4724 return 0;
4725
4726 } else
4727 if (params->loopback_mode == LOOPBACK_BMAC) {
4728 vars->link_up = 1;
4729 vars->line_speed = SPEED_10000;
4730 vars->duplex = DUPLEX_FULL;
David S. Millerc0700f92008-12-16 23:53:20 -08004731 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004732 vars->mac_type = MAC_TYPE_BMAC;
4733
4734 vars->phy_flags = PHY_XGXS_FLAG;
4735
4736 bnx2x_phy_deassert(params, vars->phy_flags);
4737 /* set bmac loopback */
4738 bnx2x_bmac_enable(params, vars, 1);
4739
4740 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
4741 params->port*4, 0);
4742 } else if (params->loopback_mode == LOOPBACK_EMAC) {
4743 vars->link_up = 1;
4744 vars->line_speed = SPEED_1000;
4745 vars->duplex = DUPLEX_FULL;
David S. Millerc0700f92008-12-16 23:53:20 -08004746 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004747 vars->mac_type = MAC_TYPE_EMAC;
4748
4749 vars->phy_flags = PHY_XGXS_FLAG;
4750
4751 bnx2x_phy_deassert(params, vars->phy_flags);
4752 /* set bmac loopback */
4753 bnx2x_emac_enable(params, vars, 1);
4754 bnx2x_emac_program(params, vars->line_speed,
4755 vars->duplex);
4756 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
4757 params->port*4, 0);
4758 } else if ((params->loopback_mode == LOOPBACK_XGXS_10) ||
4759 (params->loopback_mode == LOOPBACK_EXT_PHY)) {
4760 vars->link_up = 1;
4761 vars->line_speed = SPEED_10000;
4762 vars->duplex = DUPLEX_FULL;
David S. Millerc0700f92008-12-16 23:53:20 -08004763 vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004764
4765 vars->phy_flags = PHY_XGXS_FLAG;
4766
4767 val = REG_RD(bp,
4768 NIG_REG_XGXS0_CTRL_PHY_ADDR+
4769 params->port*0x18);
4770 params->phy_addr = (u8)val;
4771
4772 bnx2x_phy_deassert(params, vars->phy_flags);
4773 bnx2x_link_initialize(params, vars);
4774
4775 vars->mac_type = MAC_TYPE_BMAC;
4776
4777 bnx2x_bmac_enable(params, vars, 0);
4778
4779 if (params->loopback_mode == LOOPBACK_XGXS_10) {
4780 /* set 10G XGXS loopback */
4781 bnx2x_set_xgxs_loopback(params, vars, 1);
4782 } else {
4783 /* set external phy loopback */
4784 bnx2x_ext_phy_loopback(params);
4785 }
4786 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
4787 params->port*4, 0);
4788 } else
4789 /* No loopback */
4790 {
4791
4792 bnx2x_phy_deassert(params, vars->phy_flags);
4793 switch (params->switch_cfg) {
4794 case SWITCH_CFG_1G:
4795 vars->phy_flags |= PHY_SERDES_FLAG;
4796 if ((params->ext_phy_config &
4797 PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) ==
4798 PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482) {
4799 vars->phy_flags |=
4800 PHY_SGMII_FLAG;
4801 }
4802
4803 val = REG_RD(bp,
4804 NIG_REG_SERDES0_CTRL_PHY_ADDR+
4805 params->port*0x10);
4806
4807 params->phy_addr = (u8)val;
4808
4809 break;
4810 case SWITCH_CFG_10G:
4811 vars->phy_flags |= PHY_XGXS_FLAG;
4812 val = REG_RD(bp,
4813 NIG_REG_XGXS0_CTRL_PHY_ADDR+
4814 params->port*0x18);
4815 params->phy_addr = (u8)val;
4816
4817 break;
4818 default:
4819 DP(NETIF_MSG_LINK, "Invalid switch_cfg\n");
4820 return -EINVAL;
4821 break;
4822 }
Eilon Greensteinf5372252009-02-12 08:38:30 +00004823 DP(NETIF_MSG_LINK, "Phy address = 0x%x\n", params->phy_addr);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004824
4825 bnx2x_link_initialize(params, vars);
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004826 msleep(30);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004827 bnx2x_link_int_enable(params);
4828 }
4829 return 0;
4830}
4831
Eilon Greenstein589abe32009-02-12 08:36:55 +00004832static void bnx2x_8726_reset_phy(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
4833{
4834 DP(NETIF_MSG_LINK, "bnx2x_8726_reset_phy port %d\n", port);
4835
4836 /* Set serial boot control for external load */
4837 bnx2x_cl45_write(bp, port,
4838 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, ext_phy_addr,
4839 MDIO_PMA_DEVAD,
4840 MDIO_PMA_REG_GEN_CTRL, 0x0001);
4841
4842 /* Disable Transmitter */
4843 bnx2x_bcm8726_set_transmitter(bp, port, ext_phy_addr, 0);
4844
4845}
4846
4847u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
4848 u8 reset_ext_phy)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004849{
4850
4851 struct bnx2x *bp = params->bp;
4852 u32 ext_phy_config = params->ext_phy_config;
4853 u16 hw_led_mode = params->hw_led_mode;
4854 u32 chip_id = params->chip_id;
4855 u8 port = params->port;
4856 u32 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
4857 /* disable attentions */
4858
4859 vars->link_status = 0;
4860 bnx2x_update_mng(params, vars->link_status);
4861 bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
4862 (NIG_MASK_XGXS0_LINK_STATUS |
4863 NIG_MASK_XGXS0_LINK10G |
4864 NIG_MASK_SERDES0_LINK_STATUS |
4865 NIG_MASK_MI_INT));
4866
4867 /* activate nig drain */
4868 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
4869
4870 /* disable nig egress interface */
4871 REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
4872 REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
4873
4874 /* Stop BigMac rx */
4875 bnx2x_bmac_rx_disable(bp, port);
4876
4877 /* disable emac */
4878 REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
4879
4880 msleep(10);
4881 /* The PHY reset is controled by GPIO 1
4882 * Hold it as vars low
4883 */
4884 /* clear link led */
4885 bnx2x_set_led(bp, port, LED_MODE_OFF, 0, hw_led_mode, chip_id);
Eilon Greenstein589abe32009-02-12 08:36:55 +00004886 if (reset_ext_phy) {
4887 switch (ext_phy_type) {
4888 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
4889 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
4890 break;
4891 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
4892 DP(NETIF_MSG_LINK, "Setting 8073 port %d into "
4893 "low power mode\n",
4894 port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004895 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07004896 MISC_REGISTERS_GPIO_OUTPUT_LOW,
4897 port);
Eilon Greenstein589abe32009-02-12 08:36:55 +00004898 break;
4899 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
4900 {
4901 u8 ext_phy_addr = ((params->ext_phy_config &
4902 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
4903 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
4904 /* Set soft reset */
4905 bnx2x_8726_reset_phy(bp, params->port, ext_phy_addr);
4906 break;
4907 }
4908 default:
4909 /* HW reset */
4910 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
4911 MISC_REGISTERS_GPIO_OUTPUT_LOW,
4912 port);
4913 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
4914 MISC_REGISTERS_GPIO_OUTPUT_LOW,
4915 port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004916 DP(NETIF_MSG_LINK, "reset external PHY\n");
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07004917 }
4918 }
4919 /* reset the SerDes/XGXS */
4920 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
4921 (0x1ff << (port*16)));
4922
4923 /* reset BigMac */
4924 REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
4925 (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
4926
4927 /* disable nig ingress interface */
4928 REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0);
4929 REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0);
4930 REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
4931 REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
4932 vars->link_up = 0;
4933 return 0;
4934}
4935
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004936static u8 bnx2x_update_link_down(struct link_params *params,
4937 struct link_vars *vars)
4938{
4939 struct bnx2x *bp = params->bp;
4940 u8 port = params->port;
4941 DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
4942 bnx2x_set_led(bp, port, LED_MODE_OFF,
4943 0, params->hw_led_mode,
4944 params->chip_id);
4945
4946 /* indicate no mac active */
4947 vars->mac_type = MAC_TYPE_NONE;
4948
4949 /* update shared memory */
4950 vars->link_status = 0;
4951 vars->line_speed = 0;
4952 bnx2x_update_mng(params, vars->link_status);
4953
4954 /* activate nig drain */
4955 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
4956
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00004957 /* disable emac */
4958 REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
4959
4960 msleep(10);
4961
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004962 /* reset BigMac */
4963 bnx2x_bmac_rx_disable(bp, params->port);
4964 REG_WR(bp, GRCBASE_MISC +
4965 MISC_REGISTERS_RESET_REG_2_CLEAR,
4966 (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
4967 return 0;
4968}
4969
4970static u8 bnx2x_update_link_up(struct link_params *params,
4971 struct link_vars *vars,
4972 u8 link_10g, u32 gp_status)
4973{
4974 struct bnx2x *bp = params->bp;
4975 u8 port = params->port;
4976 u8 rc = 0;
4977 vars->link_status |= LINK_STATUS_LINK_UP;
4978 if (link_10g) {
4979 bnx2x_bmac_enable(params, vars, 0);
4980 bnx2x_set_led(bp, port, LED_MODE_OPER,
4981 SPEED_10000, params->hw_led_mode,
4982 params->chip_id);
4983
4984 } else {
4985 bnx2x_emac_enable(params, vars, 0);
4986 rc = bnx2x_emac_program(params, vars->line_speed,
4987 vars->duplex);
4988
4989 /* AN complete? */
4990 if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
4991 if (!(vars->phy_flags &
4992 PHY_SGMII_FLAG))
Eilon Greensteined8680a2009-02-12 08:37:12 +00004993 bnx2x_set_gmii_tx_driver(params);
Yaniv Rosner57963ed2008-08-13 15:55:28 -07004994 }
4995 }
4996
4997 /* PBF - link up */
4998 rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
4999 vars->line_speed);
5000
5001 /* disable drain */
5002 REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
5003
5004 /* update shared memory */
5005 bnx2x_update_mng(params, vars->link_status);
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00005006 msleep(20);
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005007 return rc;
5008}
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005009/* This function should called upon link interrupt */
5010/* In case vars->link_up, driver needs to
5011 1. Update the pbf
5012 2. Disable drain
5013 3. Update the shared memory
5014 4. Indicate link up
5015 5. Set LEDs
5016 Otherwise,
5017 1. Update shared memory
5018 2. Reset BigMac
5019 3. Report link down
5020 4. Unset LEDs
5021*/
5022u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
5023{
5024 struct bnx2x *bp = params->bp;
5025 u8 port = params->port;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005026 u16 gp_status;
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005027 u8 link_10g;
5028 u8 ext_phy_link_up, rc = 0;
5029 u32 ext_phy_type;
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005030
5031 DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",
5032 port,
5033 (vars->phy_flags & PHY_XGXS_FLAG),
5034 REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
5035
5036 DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n",
5037 REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
5038 REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
5039 REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c));
5040
5041 DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",
5042 REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
5043 REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
5044
Eilon Greenstein6c55c3cd2009-01-14 06:44:13 +00005045 /* disable emac */
5046 REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
5047
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005048 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005049
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005050 /* Check external link change only for non-direct */
5051 ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars);
5052
5053 /* Read gp_status */
5054 CL45_RD_OVER_CL22(bp, port, params->phy_addr,
5055 MDIO_REG_BANK_GP_STATUS,
5056 MDIO_GP_STATUS_TOP_AN_STATUS1,
5057 &gp_status);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005058
5059 rc = bnx2x_link_settings_status(params, vars, gp_status);
5060 if (rc != 0)
5061 return rc;
5062
5063 /* anything 10 and over uses the bmac */
5064 link_10g = ((vars->line_speed == SPEED_10000) ||
5065 (vars->line_speed == SPEED_12000) ||
5066 (vars->line_speed == SPEED_12500) ||
5067 (vars->line_speed == SPEED_13000) ||
5068 (vars->line_speed == SPEED_15000) ||
5069 (vars->line_speed == SPEED_16000));
5070
5071 bnx2x_link_int_ack(params, vars, link_10g);
5072
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005073 /* In case external phy link is up, and internal link is down
5074 ( not initialized yet probably after link initialization, it needs
5075 to be initialized.
5076 Note that after link down-up as result of cable plug,
5077 the xgxs link would probably become up again without the need to
5078 initialize it*/
5079
5080 if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
5081 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
Eilon Greenstein589abe32009-02-12 08:36:55 +00005082 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) &&
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005083 (ext_phy_link_up && !vars->phy_link_up))
5084 bnx2x_init_internal_phy(params, vars);
5085
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005086 /* link is up only if both local phy and external phy are up */
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005087 vars->link_up = (ext_phy_link_up && vars->phy_link_up);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005088
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005089 if (vars->link_up)
5090 rc = bnx2x_update_link_up(params, vars, link_10g, gp_status);
5091 else
5092 rc = bnx2x_update_link_down(params, vars);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005093
5094 return rc;
5095}
5096
Yaniv Rosner6bbca912008-08-13 15:57:28 -07005097static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
5098{
5099 u8 ext_phy_addr[PORT_MAX];
5100 u16 val;
5101 s8 port;
5102
5103 /* PART1 - Reset both phys */
5104 for (port = PORT_MAX - 1; port >= PORT_0; port--) {
5105 /* Extract the ext phy address for the port */
5106 u32 ext_phy_config = REG_RD(bp, shmem_base +
5107 offsetof(struct shmem_region,
5108 dev_info.port_hw_config[port].external_phy_config));
5109
5110 /* disable attentions */
5111 bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
5112 (NIG_MASK_XGXS0_LINK_STATUS |
5113 NIG_MASK_XGXS0_LINK10G |
5114 NIG_MASK_SERDES0_LINK_STATUS |
5115 NIG_MASK_MI_INT));
5116
5117 ext_phy_addr[port] =
5118 ((ext_phy_config &
5119 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
5120 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
5121
5122 /* Need to take the phy out of low power mode in order
5123 to write to access its registers */
5124 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
5125 MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
5126
5127 /* Reset the phy */
5128 bnx2x_cl45_write(bp, port,
5129 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
5130 ext_phy_addr[port],
5131 MDIO_PMA_DEVAD,
5132 MDIO_PMA_REG_CTRL,
5133 1<<15);
5134 }
5135
5136 /* Add delay of 150ms after reset */
5137 msleep(150);
5138
5139 /* PART2 - Download firmware to both phys */
5140 for (port = PORT_MAX - 1; port >= PORT_0; port--) {
5141 u16 fw_ver1;
5142
5143 bnx2x_bcm8073_external_rom_boot(bp, port,
Eilon Greensteina35da8d2009-02-12 08:37:02 +00005144 ext_phy_addr[port], shmem_base);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07005145
5146 bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
5147 ext_phy_addr[port],
5148 MDIO_PMA_DEVAD,
5149 MDIO_PMA_REG_ROM_VER1, &fw_ver1);
Eilon Greenstein16b311c2009-01-14 06:44:24 +00005150 if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
Yaniv Rosner6bbca912008-08-13 15:57:28 -07005151 DP(NETIF_MSG_LINK,
Eilon Greenstein16b311c2009-01-14 06:44:24 +00005152 "bnx2x_8073_common_init_phy port %x:"
5153 "Download failed. fw version = 0x%x\n",
5154 port, fw_ver1);
Yaniv Rosner6bbca912008-08-13 15:57:28 -07005155 return -EINVAL;
5156 }
5157
5158 /* Only set bit 10 = 1 (Tx power down) */
5159 bnx2x_cl45_read(bp, port,
5160 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
5161 ext_phy_addr[port],
5162 MDIO_PMA_DEVAD,
5163 MDIO_PMA_REG_TX_POWER_DOWN, &val);
5164
5165 /* Phase1 of TX_POWER_DOWN reset */
5166 bnx2x_cl45_write(bp, port,
5167 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
5168 ext_phy_addr[port],
5169 MDIO_PMA_DEVAD,
5170 MDIO_PMA_REG_TX_POWER_DOWN,
5171 (val | 1<<10));
5172 }
5173
5174 /* Toggle Transmitter: Power down and then up with 600ms
5175 delay between */
5176 msleep(600);
5177
5178 /* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
5179 for (port = PORT_MAX - 1; port >= PORT_0; port--) {
Eilon Greensteinf5372252009-02-12 08:38:30 +00005180 /* Phase2 of POWER_DOWN_RESET */
Yaniv Rosner6bbca912008-08-13 15:57:28 -07005181 /* Release bit 10 (Release Tx power down) */
5182 bnx2x_cl45_read(bp, port,
5183 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
5184 ext_phy_addr[port],
5185 MDIO_PMA_DEVAD,
5186 MDIO_PMA_REG_TX_POWER_DOWN, &val);
5187
5188 bnx2x_cl45_write(bp, port,
5189 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
5190 ext_phy_addr[port],
5191 MDIO_PMA_DEVAD,
5192 MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
5193 msleep(15);
5194
5195 /* Read modify write the SPI-ROM version select register */
5196 bnx2x_cl45_read(bp, port,
5197 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
5198 ext_phy_addr[port],
5199 MDIO_PMA_DEVAD,
5200 MDIO_PMA_REG_EDC_FFE_MAIN, &val);
5201 bnx2x_cl45_write(bp, port,
5202 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
5203 ext_phy_addr[port],
5204 MDIO_PMA_DEVAD,
5205 MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12)));
5206
5207 /* set GPIO2 back to LOW */
5208 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
5209 MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
5210 }
5211 return 0;
5212
5213}
5214
Eilon Greenstein589abe32009-02-12 08:36:55 +00005215
5216static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base)
5217{
5218 u8 ext_phy_addr;
5219 u32 val;
5220 s8 port;
5221 /* Use port1 because of the static port-swap */
5222 /* Enable the module detection interrupt */
5223 val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN);
5224 val |= ((1<<MISC_REGISTERS_GPIO_3)|
5225 (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT)));
5226 REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val);
5227
5228 bnx2x_hw_reset(bp, 1);
5229 msleep(5);
5230 for (port = 0; port < PORT_MAX; port++) {
5231 /* Extract the ext phy address for the port */
5232 u32 ext_phy_config = REG_RD(bp, shmem_base +
5233 offsetof(struct shmem_region,
5234 dev_info.port_hw_config[port].external_phy_config));
5235
5236 ext_phy_addr =
5237 ((ext_phy_config &
5238 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
5239 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
5240 DP(NETIF_MSG_LINK, "8726_common_init : ext_phy_addr = 0x%x\n",
5241 ext_phy_addr);
5242
5243 bnx2x_8726_reset_phy(bp, port, ext_phy_addr);
5244
5245 /* Set fault module detected LED on */
5246 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
5247 MISC_REGISTERS_GPIO_HIGH,
5248 port);
5249 }
5250
5251 return 0;
5252}
5253
Yaniv Rosner6bbca912008-08-13 15:57:28 -07005254u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
5255{
5256 u8 rc = 0;
5257 u32 ext_phy_type;
5258
Eilon Greensteinf5372252009-02-12 08:38:30 +00005259 DP(NETIF_MSG_LINK, "Begin common phy init\n");
Yaniv Rosner6bbca912008-08-13 15:57:28 -07005260
5261 /* Read the ext_phy_type for arbitrary port(0) */
5262 ext_phy_type = XGXS_EXT_PHY_TYPE(
5263 REG_RD(bp, shmem_base +
5264 offsetof(struct shmem_region,
5265 dev_info.port_hw_config[0].external_phy_config)));
5266
5267 switch (ext_phy_type) {
5268 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
5269 {
5270 rc = bnx2x_8073_common_init_phy(bp, shmem_base);
5271 break;
5272 }
Eilon Greenstein589abe32009-02-12 08:36:55 +00005273 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
5274 /* GPIO1 affects both ports, so there's need to pull
5275 it for single port alone */
5276 rc = bnx2x_8726_common_init_phy(bp, shmem_base);
5277
5278 break;
Yaniv Rosner6bbca912008-08-13 15:57:28 -07005279 default:
5280 DP(NETIF_MSG_LINK,
5281 "bnx2x_common_init_phy: ext_phy 0x%x not required\n",
5282 ext_phy_type);
5283 break;
5284 }
5285
5286 return rc;
5287}
5288
5289
5290
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005291static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
5292{
5293 u16 val, cnt;
5294
5295 bnx2x_cl45_read(bp, port,
5296 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5297 phy_addr,
5298 MDIO_PMA_DEVAD,
5299 MDIO_PMA_REG_7101_RESET, &val);
5300
5301 for (cnt = 0; cnt < 10; cnt++) {
5302 msleep(50);
5303 /* Writes a self-clearing reset */
5304 bnx2x_cl45_write(bp, port,
5305 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5306 phy_addr,
5307 MDIO_PMA_DEVAD,
5308 MDIO_PMA_REG_7101_RESET,
5309 (val | (1<<15)));
5310 /* Wait for clear */
5311 bnx2x_cl45_read(bp, port,
5312 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5313 phy_addr,
5314 MDIO_PMA_DEVAD,
5315 MDIO_PMA_REG_7101_RESET, &val);
5316
5317 if ((val & (1<<15)) == 0)
5318 break;
5319 }
5320}
5321#define RESERVED_SIZE 256
5322/* max application is 160K bytes - data at end of RAM */
Eilon Greenstein6378c022008-08-13 15:59:25 -07005323#define MAX_APP_SIZE (160*1024 - RESERVED_SIZE)
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005324
5325/* Header is 14 bytes */
5326#define HEADER_SIZE 14
5327#define DATA_OFFSET HEADER_SIZE
5328
5329#define SPI_START_TRANSFER(bp, port, ext_phy_addr) \
5330 bnx2x_cl45_write(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, \
5331 ext_phy_addr, \
5332 MDIO_PCS_DEVAD, \
5333 MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 1)
5334
5335/* Programs an image to DSP's flash via the SPI port*/
5336static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
5337 u8 ext_phy_addr,
5338 char data[], u32 size)
5339{
5340 const u16 num_trans = size/4; /* 4 bytes can be sent at a time */
5341 /* Doesn't include last trans!*/
5342 const u16 last_trans_size = size%4; /* Num bytes on last trans */
5343 u16 trans_cnt, byte_cnt;
5344 u32 data_index;
5345 u16 tmp;
5346 u16 code_started = 0;
5347 u16 image_revision1, image_revision2;
5348 u16 cnt;
5349
5350 DP(NETIF_MSG_LINK, "bnx2x_sfx7101_flash_download file_size=%d\n", size);
5351 /* Going to flash*/
5352 if ((size-HEADER_SIZE) > MAX_APP_SIZE) {
5353 /* This very often will be the case, because the image is built
5354 with 160Kbytes size whereas the total image size must actually
5355 be 160Kbytes-RESERVED_SIZE */
5356 DP(NETIF_MSG_LINK, "Warning, file size was %d bytes "
5357 "truncated to %d bytes\n", size, MAX_APP_SIZE);
5358 size = MAX_APP_SIZE+HEADER_SIZE;
5359 }
5360 DP(NETIF_MSG_LINK, "File version is %c%c\n", data[0x14e], data[0x14f]);
Eilon Greenstein3196a882008-08-13 15:58:49 -07005361 DP(NETIF_MSG_LINK, " %c%c\n", data[0x150], data[0x151]);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005362 /* Put the DSP in download mode by setting FLASH_CFG[2] to 1
5363 and issuing a reset.*/
5364
5365 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
Eilon Greenstein17de50b2008-08-13 15:56:59 -07005366 MISC_REGISTERS_GPIO_HIGH, port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005367
5368 bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
5369
5370 /* wait 0.5 sec */
5371 for (cnt = 0; cnt < 100; cnt++)
5372 msleep(5);
5373
5374 /* Make sure we can access the DSP
5375 And it's in the correct mode (waiting for download) */
5376
5377 bnx2x_cl45_read(bp, port,
5378 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5379 ext_phy_addr,
5380 MDIO_PCS_DEVAD,
5381 MDIO_PCS_REG_7101_DSP_ACCESS, &tmp);
5382
5383 if (tmp != 0x000A) {
5384 DP(NETIF_MSG_LINK, "DSP is not in waiting on download mode. "
5385 "Expected 0x000A, read 0x%04X\n", tmp);
5386 DP(NETIF_MSG_LINK, "Download failed\n");
5387 return -EINVAL;
5388 }
5389
5390 /* Mux the SPI interface away from the internal processor */
5391 bnx2x_cl45_write(bp, port,
5392 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5393 ext_phy_addr,
5394 MDIO_PCS_DEVAD,
5395 MDIO_PCS_REG_7101_SPI_MUX, 1);
5396
5397 /* Reset the SPI port */
5398 bnx2x_cl45_write(bp, port,
5399 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5400 ext_phy_addr,
5401 MDIO_PCS_DEVAD,
5402 MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 0);
5403 bnx2x_cl45_write(bp, port,
5404 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5405 ext_phy_addr,
5406 MDIO_PCS_DEVAD,
5407 MDIO_PCS_REG_7101_SPI_CTRL_ADDR,
5408 (1<<MDIO_PCS_REG_7101_SPI_RESET_BIT));
5409 bnx2x_cl45_write(bp, port,
5410 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5411 ext_phy_addr,
5412 MDIO_PCS_DEVAD,
5413 MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 0);
5414
5415 /* Erase the flash */
5416 bnx2x_cl45_write(bp, port,
5417 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5418 ext_phy_addr,
5419 MDIO_PCS_DEVAD,
5420 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5421 MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
5422
5423 bnx2x_cl45_write(bp, port,
5424 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5425 ext_phy_addr,
5426 MDIO_PCS_DEVAD,
5427 MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
5428 1);
5429
5430 SPI_START_TRANSFER(bp, port, ext_phy_addr);
5431 bnx2x_cl45_write(bp, port,
5432 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5433 ext_phy_addr,
5434 MDIO_PCS_DEVAD,
5435 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5436 MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD);
5437
5438 bnx2x_cl45_write(bp, port,
5439 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5440 ext_phy_addr,
5441 MDIO_PCS_DEVAD,
5442 MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
5443 1);
5444 SPI_START_TRANSFER(bp, port, ext_phy_addr);
5445
5446 /* Wait 10 seconds, the maximum time for the erase to complete */
5447 DP(NETIF_MSG_LINK, "Erasing flash, this takes 10 seconds...\n");
5448 for (cnt = 0; cnt < 1000; cnt++)
5449 msleep(10);
5450
5451 DP(NETIF_MSG_LINK, "Downloading flash, please wait...\n");
5452 data_index = 0;
5453 for (trans_cnt = 0; trans_cnt < num_trans; trans_cnt++) {
5454 bnx2x_cl45_write(bp, port,
5455 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5456 ext_phy_addr,
5457 MDIO_PCS_DEVAD,
5458 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5459 MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
5460
5461 bnx2x_cl45_write(bp, port,
5462 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5463 ext_phy_addr,
5464 MDIO_PCS_DEVAD,
5465 MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
5466 1);
5467 SPI_START_TRANSFER(bp, port, ext_phy_addr);
5468
5469 bnx2x_cl45_write(bp, port,
5470 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5471 ext_phy_addr,
5472 MDIO_PCS_DEVAD,
5473 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5474 MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD);
5475
5476 /* Bits 23-16 of address */
5477 bnx2x_cl45_write(bp, port,
5478 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5479 ext_phy_addr,
5480 MDIO_PCS_DEVAD,
5481 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5482 (data_index>>16));
5483 /* Bits 15-8 of address */
5484 bnx2x_cl45_write(bp, port,
5485 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5486 ext_phy_addr,
5487 MDIO_PCS_DEVAD,
5488 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5489 (data_index>>8));
5490
5491 /* Bits 7-0 of address */
5492 bnx2x_cl45_write(bp, port,
5493 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5494 ext_phy_addr,
5495 MDIO_PCS_DEVAD,
5496 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5497 ((u16)data_index));
5498
5499 byte_cnt = 0;
5500 while (byte_cnt < 4 && data_index < size) {
5501 bnx2x_cl45_write(bp, port,
5502 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5503 ext_phy_addr,
5504 MDIO_PCS_DEVAD,
5505 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5506 data[data_index++]);
5507 byte_cnt++;
5508 }
5509
5510 bnx2x_cl45_write(bp, port,
5511 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5512 ext_phy_addr,
5513 MDIO_PCS_DEVAD,
5514 MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
5515 byte_cnt+4);
5516
5517 SPI_START_TRANSFER(bp, port, ext_phy_addr);
5518 msleep(5); /* Wait 5 ms minimum between transs */
5519
5520 /* Let the user know something's going on.*/
5521 /* a pacifier ever 4K */
5522 if ((data_index % 1023) == 0)
5523 DP(NETIF_MSG_LINK, "Download %d%%\n", data_index/size);
5524 }
5525
5526 DP(NETIF_MSG_LINK, "\n");
5527 /* Transfer the last block if there is data remaining */
5528 if (last_trans_size) {
5529 bnx2x_cl45_write(bp, port,
5530 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5531 ext_phy_addr,
5532 MDIO_PCS_DEVAD,
5533 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5534 MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
5535
5536 bnx2x_cl45_write(bp, port,
5537 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5538 ext_phy_addr,
5539 MDIO_PCS_DEVAD,
5540 MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
5541 1);
5542
5543 SPI_START_TRANSFER(bp, port, ext_phy_addr);
5544
5545 bnx2x_cl45_write(bp, port,
5546 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5547 ext_phy_addr,
5548 MDIO_PCS_DEVAD,
5549 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5550 MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD);
5551
5552 /* Bits 23-16 of address */
5553 bnx2x_cl45_write(bp, port,
5554 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5555 ext_phy_addr,
5556 MDIO_PCS_DEVAD,
5557 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5558 (data_index>>16));
5559 /* Bits 15-8 of address */
5560 bnx2x_cl45_write(bp, port,
5561 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5562 ext_phy_addr,
5563 MDIO_PCS_DEVAD,
5564 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5565 (data_index>>8));
5566
5567 /* Bits 7-0 of address */
5568 bnx2x_cl45_write(bp, port,
5569 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5570 ext_phy_addr,
5571 MDIO_PCS_DEVAD,
5572 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5573 ((u16)data_index));
5574
5575 byte_cnt = 0;
5576 while (byte_cnt < last_trans_size && data_index < size) {
5577 /* Bits 7-0 of address */
5578 bnx2x_cl45_write(bp, port,
5579 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5580 ext_phy_addr,
5581 MDIO_PCS_DEVAD,
5582 MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
5583 data[data_index++]);
5584 byte_cnt++;
5585 }
5586
5587 bnx2x_cl45_write(bp, port,
5588 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5589 ext_phy_addr,
5590 MDIO_PCS_DEVAD,
5591 MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
5592 byte_cnt+4);
5593
5594 SPI_START_TRANSFER(bp, port, ext_phy_addr);
5595 }
5596
5597 /* DSP Remove Download Mode */
Eilon Greenstein17de50b2008-08-13 15:56:59 -07005598 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
5599 MISC_REGISTERS_GPIO_LOW, port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005600
5601 bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
5602
5603 /* wait 0.5 sec to allow it to run */
5604 for (cnt = 0; cnt < 100; cnt++)
5605 msleep(5);
5606
Eilon Greenstein17de50b2008-08-13 15:56:59 -07005607 bnx2x_hw_reset(bp, port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005608
5609 for (cnt = 0; cnt < 100; cnt++)
5610 msleep(5);
5611
5612 /* Check that the code is started. In case the download
5613 checksum failed, the code won't be started. */
5614 bnx2x_cl45_read(bp, port,
5615 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5616 ext_phy_addr,
5617 MDIO_PCS_DEVAD,
5618 MDIO_PCS_REG_7101_DSP_ACCESS,
5619 &tmp);
5620
5621 code_started = (tmp & (1<<4));
5622 if (!code_started) {
5623 DP(NETIF_MSG_LINK, "Download failed. Please check file.\n");
5624 return -EINVAL;
5625 }
5626
5627 /* Verify that the file revision is now equal to the image
5628 revision within the DSP */
5629 bnx2x_cl45_read(bp, port,
5630 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5631 ext_phy_addr,
5632 MDIO_PMA_DEVAD,
5633 MDIO_PMA_REG_7101_VER1,
5634 &image_revision1);
5635
5636 bnx2x_cl45_read(bp, port,
5637 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
5638 ext_phy_addr,
5639 MDIO_PMA_DEVAD,
5640 MDIO_PMA_REG_7101_VER2,
5641 &image_revision2);
5642
Eilon Greenstein3196a882008-08-13 15:58:49 -07005643 if (data[0x14e] != (image_revision2&0xFF) ||
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005644 data[0x14f] != ((image_revision2&0xFF00)>>8) ||
5645 data[0x150] != (image_revision1&0xFF) ||
5646 data[0x151] != ((image_revision1&0xFF00)>>8)) {
5647 DP(NETIF_MSG_LINK, "Download failed.\n");
5648 return -EINVAL;
5649 }
5650 DP(NETIF_MSG_LINK, "Download %d%%\n", data_index/size);
5651 return 0;
5652}
5653
5654u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
5655 u8 driver_loaded, char data[], u32 size)
5656{
5657 u8 rc = 0;
5658 u32 ext_phy_type;
5659 u8 ext_phy_addr;
5660 ext_phy_addr = ((ext_phy_config &
5661 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
5662 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
5663
5664 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
5665
5666 switch (ext_phy_type) {
5667 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
5668 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
5669 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
5670 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
5671 DP(NETIF_MSG_LINK,
5672 "Flash download not supported for this ext phy\n");
5673 rc = -EINVAL;
5674 break;
5675 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
5676 /* Take ext phy out of reset */
5677 if (!driver_loaded)
Yaniv Rosner57963ed2008-08-13 15:55:28 -07005678 bnx2x_turn_on_ef(bp, port, ext_phy_addr, ext_phy_type);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005679 rc = bnx2x_sfx7101_flash_download(bp, port, ext_phy_addr,
5680 data, size);
5681 if (!driver_loaded)
Eilon Greenstein17de50b2008-08-13 15:56:59 -07005682 bnx2x_turn_off_sf(bp, port);
Yaniv Rosnerea4e0402008-06-23 20:27:26 -07005683 break;
5684 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
5685 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
5686 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
5687 default:
5688 DP(NETIF_MSG_LINK, "Invalid ext phy type\n");
5689 rc = -EINVAL;
5690 break;
5691 }
5692 return rc;
5693}
5694