Andres Salomon | 5f0a96b | 2009-12-14 18:00:32 -0800 | [diff] [blame^] | 1 | /* |
| 2 | * AMD CS5535/CS5536 GPIO driver |
| 3 | * Copyright (C) 2006 Advanced Micro Devices, Inc. |
| 4 | * Copyright (C) 2007-2009 Andres Salomon <dilinger@collabora.co.uk> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of version 2 of the GNU General Public License |
| 8 | * as published by the Free Software Foundation. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/spinlock.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/pci.h> |
| 15 | #include <linux/gpio.h> |
| 16 | #include <linux/io.h> |
| 17 | #include <linux/cs5535.h> |
| 18 | |
| 19 | #define DRV_NAME "cs5535-gpio" |
| 20 | #define GPIO_BAR 1 |
| 21 | |
| 22 | static struct cs5535_gpio_chip { |
| 23 | struct gpio_chip chip; |
| 24 | resource_size_t base; |
| 25 | |
| 26 | struct pci_dev *pdev; |
| 27 | spinlock_t lock; |
| 28 | } cs5535_gpio_chip; |
| 29 | |
| 30 | /* |
| 31 | * The CS5535/CS5536 GPIOs support a number of extra features not defined |
| 32 | * by the gpio_chip API, so these are exported. For a full list of the |
| 33 | * registers, see include/linux/cs5535.h. |
| 34 | */ |
| 35 | |
| 36 | static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset, |
| 37 | unsigned int reg) |
| 38 | { |
| 39 | if (offset < 16) |
| 40 | /* low bank register */ |
| 41 | outl(1 << offset, chip->base + reg); |
| 42 | else |
| 43 | /* high bank register */ |
| 44 | outl(1 << (offset - 16), chip->base + 0x80 + reg); |
| 45 | } |
| 46 | |
| 47 | void cs5535_gpio_set(unsigned offset, unsigned int reg) |
| 48 | { |
| 49 | struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; |
| 50 | unsigned long flags; |
| 51 | |
| 52 | spin_lock_irqsave(&chip->lock, flags); |
| 53 | __cs5535_gpio_set(chip, offset, reg); |
| 54 | spin_unlock_irqrestore(&chip->lock, flags); |
| 55 | } |
| 56 | EXPORT_SYMBOL_GPL(cs5535_gpio_set); |
| 57 | |
| 58 | static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset, |
| 59 | unsigned int reg) |
| 60 | { |
| 61 | if (offset < 16) |
| 62 | /* low bank register */ |
| 63 | outl(1 << (offset + 16), chip->base + reg); |
| 64 | else |
| 65 | /* high bank register */ |
| 66 | outl(1 << offset, chip->base + 0x80 + reg); |
| 67 | } |
| 68 | |
| 69 | void cs5535_gpio_clear(unsigned offset, unsigned int reg) |
| 70 | { |
| 71 | struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; |
| 72 | unsigned long flags; |
| 73 | |
| 74 | spin_lock_irqsave(&chip->lock, flags); |
| 75 | __cs5535_gpio_clear(chip, offset, reg); |
| 76 | spin_unlock_irqrestore(&chip->lock, flags); |
| 77 | } |
| 78 | EXPORT_SYMBOL_GPL(cs5535_gpio_clear); |
| 79 | |
| 80 | int cs5535_gpio_isset(unsigned offset, unsigned int reg) |
| 81 | { |
| 82 | struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; |
| 83 | unsigned long flags; |
| 84 | long val; |
| 85 | |
| 86 | spin_lock_irqsave(&chip->lock, flags); |
| 87 | if (offset < 16) |
| 88 | /* low bank register */ |
| 89 | val = inl(chip->base + reg); |
| 90 | else { |
| 91 | /* high bank register */ |
| 92 | val = inl(chip->base + 0x80 + reg); |
| 93 | offset -= 16; |
| 94 | } |
| 95 | spin_unlock_irqrestore(&chip->lock, flags); |
| 96 | |
| 97 | return (val & (1 << offset)) ? 1 : 0; |
| 98 | } |
| 99 | EXPORT_SYMBOL_GPL(cs5535_gpio_isset); |
| 100 | |
| 101 | /* |
| 102 | * Generic gpio_chip API support. |
| 103 | */ |
| 104 | |
| 105 | static int chip_gpio_get(struct gpio_chip *chip, unsigned offset) |
| 106 | { |
| 107 | return cs5535_gpio_isset(offset, GPIO_OUTPUT_VAL); |
| 108 | } |
| 109 | |
| 110 | static void chip_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| 111 | { |
| 112 | if (val) |
| 113 | cs5535_gpio_set(offset, GPIO_OUTPUT_VAL); |
| 114 | else |
| 115 | cs5535_gpio_clear(offset, GPIO_OUTPUT_VAL); |
| 116 | } |
| 117 | |
| 118 | static int chip_direction_input(struct gpio_chip *c, unsigned offset) |
| 119 | { |
| 120 | struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c; |
| 121 | unsigned long flags; |
| 122 | |
| 123 | spin_lock_irqsave(&chip->lock, flags); |
| 124 | __cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE); |
| 125 | spin_unlock_irqrestore(&chip->lock, flags); |
| 126 | |
| 127 | return 0; |
| 128 | } |
| 129 | |
| 130 | static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val) |
| 131 | { |
| 132 | struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c; |
| 133 | unsigned long flags; |
| 134 | |
| 135 | spin_lock_irqsave(&chip->lock, flags); |
| 136 | |
| 137 | __cs5535_gpio_set(chip, offset, GPIO_OUTPUT_ENABLE); |
| 138 | if (val) |
| 139 | __cs5535_gpio_set(chip, offset, GPIO_OUTPUT_VAL); |
| 140 | else |
| 141 | __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_VAL); |
| 142 | |
| 143 | spin_unlock_irqrestore(&chip->lock, flags); |
| 144 | |
| 145 | return 0; |
| 146 | } |
| 147 | |
| 148 | static struct cs5535_gpio_chip cs5535_gpio_chip = { |
| 149 | .chip = { |
| 150 | .owner = THIS_MODULE, |
| 151 | .label = DRV_NAME, |
| 152 | |
| 153 | .base = 0, |
| 154 | .ngpio = 28, |
| 155 | |
| 156 | .get = chip_gpio_get, |
| 157 | .set = chip_gpio_set, |
| 158 | |
| 159 | .direction_input = chip_direction_input, |
| 160 | .direction_output = chip_direction_output, |
| 161 | }, |
| 162 | }; |
| 163 | |
| 164 | static int __init cs5535_gpio_probe(struct pci_dev *pdev, |
| 165 | const struct pci_device_id *pci_id) |
| 166 | { |
| 167 | int err; |
| 168 | |
| 169 | /* There are two ways to get the GPIO base address; one is by |
| 170 | * fetching it from MSR_LBAR_GPIO, the other is by reading the |
| 171 | * PCI BAR info. The latter method is easier (especially across |
| 172 | * different architectures), so we'll stick with that for now. If |
| 173 | * it turns out to be unreliable in the face of crappy BIOSes, we |
| 174 | * can always go back to using MSRs.. */ |
| 175 | |
| 176 | err = pci_enable_device_io(pdev); |
| 177 | if (err) { |
| 178 | dev_err(&pdev->dev, "can't enable device IO\n"); |
| 179 | goto done; |
| 180 | } |
| 181 | |
| 182 | err = pci_request_region(pdev, GPIO_BAR, DRV_NAME); |
| 183 | if (err) { |
| 184 | dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR); |
| 185 | goto done; |
| 186 | } |
| 187 | |
| 188 | /* set up the driver-specific struct */ |
| 189 | cs5535_gpio_chip.base = pci_resource_start(pdev, GPIO_BAR); |
| 190 | cs5535_gpio_chip.pdev = pdev; |
| 191 | spin_lock_init(&cs5535_gpio_chip.lock); |
| 192 | |
| 193 | dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", GPIO_BAR, |
| 194 | (unsigned long long) cs5535_gpio_chip.base); |
| 195 | |
| 196 | /* finally, register with the generic GPIO API */ |
| 197 | err = gpiochip_add(&cs5535_gpio_chip.chip); |
| 198 | if (err) { |
| 199 | dev_err(&pdev->dev, "failed to register gpio chip\n"); |
| 200 | goto release_region; |
| 201 | } |
| 202 | |
| 203 | printk(KERN_INFO DRV_NAME ": GPIO support successfully loaded.\n"); |
| 204 | return 0; |
| 205 | |
| 206 | release_region: |
| 207 | pci_release_region(pdev, GPIO_BAR); |
| 208 | done: |
| 209 | return err; |
| 210 | } |
| 211 | |
| 212 | static void __exit cs5535_gpio_remove(struct pci_dev *pdev) |
| 213 | { |
| 214 | int err; |
| 215 | |
| 216 | err = gpiochip_remove(&cs5535_gpio_chip.chip); |
| 217 | if (err) { |
| 218 | /* uhh? */ |
| 219 | dev_err(&pdev->dev, "unable to remove gpio_chip?\n"); |
| 220 | } |
| 221 | pci_release_region(pdev, GPIO_BAR); |
| 222 | } |
| 223 | |
| 224 | static struct pci_device_id cs5535_gpio_pci_tbl[] = { |
| 225 | { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, |
| 226 | { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, |
| 227 | { 0, }, |
| 228 | }; |
| 229 | MODULE_DEVICE_TABLE(pci, cs5535_gpio_pci_tbl); |
| 230 | |
| 231 | /* |
| 232 | * We can't use the standard PCI driver registration stuff here, since |
| 233 | * that allows only one driver to bind to each PCI device (and we want |
| 234 | * multiple drivers to be able to bind to the device). Instead, manually |
| 235 | * scan for the PCI device, request a single region, and keep track of the |
| 236 | * devices that we're using. |
| 237 | */ |
| 238 | |
| 239 | static int __init cs5535_gpio_scan_pci(void) |
| 240 | { |
| 241 | struct pci_dev *pdev; |
| 242 | int err = -ENODEV; |
| 243 | int i; |
| 244 | |
| 245 | for (i = 0; i < ARRAY_SIZE(cs5535_gpio_pci_tbl); i++) { |
| 246 | pdev = pci_get_device(cs5535_gpio_pci_tbl[i].vendor, |
| 247 | cs5535_gpio_pci_tbl[i].device, NULL); |
| 248 | if (pdev) { |
| 249 | err = cs5535_gpio_probe(pdev, &cs5535_gpio_pci_tbl[i]); |
| 250 | if (err) |
| 251 | pci_dev_put(pdev); |
| 252 | |
| 253 | /* we only support a single CS5535/6 southbridge */ |
| 254 | break; |
| 255 | } |
| 256 | } |
| 257 | |
| 258 | return err; |
| 259 | } |
| 260 | |
| 261 | static void __exit cs5535_gpio_free_pci(void) |
| 262 | { |
| 263 | cs5535_gpio_remove(cs5535_gpio_chip.pdev); |
| 264 | pci_dev_put(cs5535_gpio_chip.pdev); |
| 265 | } |
| 266 | |
| 267 | static int __init cs5535_gpio_init(void) |
| 268 | { |
| 269 | return cs5535_gpio_scan_pci(); |
| 270 | } |
| 271 | |
| 272 | static void __exit cs5535_gpio_exit(void) |
| 273 | { |
| 274 | cs5535_gpio_free_pci(); |
| 275 | } |
| 276 | |
| 277 | module_init(cs5535_gpio_init); |
| 278 | module_exit(cs5535_gpio_exit); |
| 279 | |
| 280 | MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>"); |
| 281 | MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver"); |
| 282 | MODULE_LICENSE("GPL"); |