blob: 52e3df113ec01fd8342e824b869bc6f7d4ce5865 [file] [log] [blame]
Ben Dooksb4975492008-07-03 12:32:51 +01001/* linux/drivers/serial/samsuing.c
2 *
3 * Driver core for Samsung SoC onboard UARTs.
4 *
Ben Dooksccae9412009-11-13 22:54:14 +00005 * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
Ben Dooksb4975492008-07-03 12:32:51 +01006 * http://armlinux.simtec.co.uk/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13/* Hote on 2410 error handling
14 *
15 * The s3c2410 manual has a love/hate affair with the contents of the
16 * UERSTAT register in the UART blocks, and keeps marking some of the
17 * error bits as reserved. Having checked with the s3c2410x01,
18 * it copes with BREAKs properly, so I am happy to ignore the RESERVED
19 * feature from the latter versions of the manual.
20 *
21 * If it becomes aparrent that latter versions of the 2410 remove these
22 * bits, then action will have to be taken to differentiate the versions
23 * and change the policy on BREAK
24 *
25 * BJD, 04-Nov-2004
26*/
27
28#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
29#define SUPPORT_SYSRQ
30#endif
31
32#include <linux/module.h>
33#include <linux/ioport.h>
34#include <linux/io.h>
35#include <linux/platform_device.h>
36#include <linux/init.h>
37#include <linux/sysrq.h>
38#include <linux/console.h>
39#include <linux/tty.h>
40#include <linux/tty_flip.h>
41#include <linux/serial_core.h>
42#include <linux/serial.h>
43#include <linux/delay.h>
44#include <linux/clk.h>
Ben Dooks30555472008-10-21 14:06:36 +010045#include <linux/cpufreq.h>
Ben Dooksb4975492008-07-03 12:32:51 +010046
47#include <asm/irq.h>
48
Russell Kinga09e64f2008-08-05 16:14:15 +010049#include <mach/hardware.h>
Ben Dooksb690ace2008-10-21 14:07:03 +010050#include <mach/map.h>
Ben Dooksb4975492008-07-03 12:32:51 +010051
Ben Dooksa2b7ba92008-10-07 22:26:09 +010052#include <plat/regs-serial.h>
Ben Dooksb4975492008-07-03 12:32:51 +010053
54#include "samsung.h"
55
56/* UART name and device definitions */
57
58#define S3C24XX_SERIAL_NAME "ttySAC"
59#define S3C24XX_SERIAL_MAJOR 204
60#define S3C24XX_SERIAL_MINOR 64
61
Ben Dooksb4975492008-07-03 12:32:51 +010062/* macros to change one thing to another */
63
64#define tx_enabled(port) ((port)->unused[0])
65#define rx_enabled(port) ((port)->unused[1])
66
67/* flag to ignore all characters comming in */
68#define RXSTAT_DUMMY_READ (0x10000000)
69
70static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
71{
72 return container_of(port, struct s3c24xx_uart_port, port);
73}
74
75/* translate a port to the device name */
76
77static inline const char *s3c24xx_serial_portname(struct uart_port *port)
78{
79 return to_platform_device(port->dev)->name;
80}
81
82static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
83{
84 return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
85}
86
87static void s3c24xx_serial_rx_enable(struct uart_port *port)
88{
89 unsigned long flags;
90 unsigned int ucon, ufcon;
91 int count = 10000;
92
93 spin_lock_irqsave(&port->lock, flags);
94
95 while (--count && !s3c24xx_serial_txempty_nofifo(port))
96 udelay(100);
97
98 ufcon = rd_regl(port, S3C2410_UFCON);
99 ufcon |= S3C2410_UFCON_RESETRX;
100 wr_regl(port, S3C2410_UFCON, ufcon);
101
102 ucon = rd_regl(port, S3C2410_UCON);
103 ucon |= S3C2410_UCON_RXIRQMODE;
104 wr_regl(port, S3C2410_UCON, ucon);
105
106 rx_enabled(port) = 1;
107 spin_unlock_irqrestore(&port->lock, flags);
108}
109
110static void s3c24xx_serial_rx_disable(struct uart_port *port)
111{
112 unsigned long flags;
113 unsigned int ucon;
114
115 spin_lock_irqsave(&port->lock, flags);
116
117 ucon = rd_regl(port, S3C2410_UCON);
118 ucon &= ~S3C2410_UCON_RXIRQMODE;
119 wr_regl(port, S3C2410_UCON, ucon);
120
121 rx_enabled(port) = 0;
122 spin_unlock_irqrestore(&port->lock, flags);
123}
124
125static void s3c24xx_serial_stop_tx(struct uart_port *port)
126{
Ben Dooksb73c2892008-10-21 14:07:04 +0100127 struct s3c24xx_uart_port *ourport = to_ourport(port);
128
Ben Dooksb4975492008-07-03 12:32:51 +0100129 if (tx_enabled(port)) {
Mark Brown41609ff2009-04-14 11:06:49 +0100130 disable_irq_nosync(ourport->tx_irq);
Ben Dooksb4975492008-07-03 12:32:51 +0100131 tx_enabled(port) = 0;
132 if (port->flags & UPF_CONS_FLOW)
133 s3c24xx_serial_rx_enable(port);
134 }
135}
136
137static void s3c24xx_serial_start_tx(struct uart_port *port)
138{
Ben Dooksb73c2892008-10-21 14:07:04 +0100139 struct s3c24xx_uart_port *ourport = to_ourport(port);
140
Ben Dooksb4975492008-07-03 12:32:51 +0100141 if (!tx_enabled(port)) {
142 if (port->flags & UPF_CONS_FLOW)
143 s3c24xx_serial_rx_disable(port);
144
Ben Dooksb73c2892008-10-21 14:07:04 +0100145 enable_irq(ourport->tx_irq);
Ben Dooksb4975492008-07-03 12:32:51 +0100146 tx_enabled(port) = 1;
147 }
148}
149
150
151static void s3c24xx_serial_stop_rx(struct uart_port *port)
152{
Ben Dooksb73c2892008-10-21 14:07:04 +0100153 struct s3c24xx_uart_port *ourport = to_ourport(port);
154
Ben Dooksb4975492008-07-03 12:32:51 +0100155 if (rx_enabled(port)) {
156 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
Mark Brown41609ff2009-04-14 11:06:49 +0100157 disable_irq_nosync(ourport->rx_irq);
Ben Dooksb4975492008-07-03 12:32:51 +0100158 rx_enabled(port) = 0;
159 }
160}
161
162static void s3c24xx_serial_enable_ms(struct uart_port *port)
163{
164}
165
166static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
167{
168 return to_ourport(port)->info;
169}
170
171static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
172{
173 if (port->dev == NULL)
174 return NULL;
175
176 return (struct s3c2410_uartcfg *)port->dev->platform_data;
177}
178
179static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
180 unsigned long ufstat)
181{
182 struct s3c24xx_uart_info *info = ourport->info;
183
184 if (ufstat & info->rx_fifofull)
185 return info->fifosize;
186
187 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
188}
189
190
191/* ? - where has parity gone?? */
192#define S3C2410_UERSTAT_PARITY (0x1000)
193
194static irqreturn_t
195s3c24xx_serial_rx_chars(int irq, void *dev_id)
196{
197 struct s3c24xx_uart_port *ourport = dev_id;
198 struct uart_port *port = &ourport->port;
Alan Coxebd2c8f2009-09-19 13:13:28 -0700199 struct tty_struct *tty = port->state->port.tty;
Ben Dooksb4975492008-07-03 12:32:51 +0100200 unsigned int ufcon, ch, flag, ufstat, uerstat;
201 int max_count = 64;
202
203 while (max_count-- > 0) {
204 ufcon = rd_regl(port, S3C2410_UFCON);
205 ufstat = rd_regl(port, S3C2410_UFSTAT);
206
207 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
208 break;
209
210 uerstat = rd_regl(port, S3C2410_UERSTAT);
211 ch = rd_regb(port, S3C2410_URXH);
212
213 if (port->flags & UPF_CONS_FLOW) {
214 int txe = s3c24xx_serial_txempty_nofifo(port);
215
216 if (rx_enabled(port)) {
217 if (!txe) {
218 rx_enabled(port) = 0;
219 continue;
220 }
221 } else {
222 if (txe) {
223 ufcon |= S3C2410_UFCON_RESETRX;
224 wr_regl(port, S3C2410_UFCON, ufcon);
225 rx_enabled(port) = 1;
226 goto out;
227 }
228 continue;
229 }
230 }
231
232 /* insert the character into the buffer */
233
234 flag = TTY_NORMAL;
235 port->icount.rx++;
236
237 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
238 dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
239 ch, uerstat);
240
241 /* check for break */
242 if (uerstat & S3C2410_UERSTAT_BREAK) {
243 dbg("break!\n");
244 port->icount.brk++;
245 if (uart_handle_break(port))
246 goto ignore_char;
247 }
248
249 if (uerstat & S3C2410_UERSTAT_FRAME)
250 port->icount.frame++;
251 if (uerstat & S3C2410_UERSTAT_OVERRUN)
252 port->icount.overrun++;
253
254 uerstat &= port->read_status_mask;
255
256 if (uerstat & S3C2410_UERSTAT_BREAK)
257 flag = TTY_BREAK;
258 else if (uerstat & S3C2410_UERSTAT_PARITY)
259 flag = TTY_PARITY;
260 else if (uerstat & (S3C2410_UERSTAT_FRAME |
261 S3C2410_UERSTAT_OVERRUN))
262 flag = TTY_FRAME;
263 }
264
265 if (uart_handle_sysrq_char(port, ch))
266 goto ignore_char;
267
268 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
269 ch, flag);
270
271 ignore_char:
272 continue;
273 }
274 tty_flip_buffer_push(tty);
275
276 out:
277 return IRQ_HANDLED;
278}
279
280static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
281{
282 struct s3c24xx_uart_port *ourport = id;
283 struct uart_port *port = &ourport->port;
Alan Coxebd2c8f2009-09-19 13:13:28 -0700284 struct circ_buf *xmit = &port->state->xmit;
Ben Dooksb4975492008-07-03 12:32:51 +0100285 int count = 256;
286
287 if (port->x_char) {
288 wr_regb(port, S3C2410_UTXH, port->x_char);
289 port->icount.tx++;
290 port->x_char = 0;
291 goto out;
292 }
293
294 /* if there isnt anything more to transmit, or the uart is now
295 * stopped, disable the uart and exit
296 */
297
298 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
299 s3c24xx_serial_stop_tx(port);
300 goto out;
301 }
302
303 /* try and drain the buffer... */
304
305 while (!uart_circ_empty(xmit) && count-- > 0) {
306 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
307 break;
308
309 wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
310 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
311 port->icount.tx++;
312 }
313
314 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
315 uart_write_wakeup(port);
316
317 if (uart_circ_empty(xmit))
318 s3c24xx_serial_stop_tx(port);
319
320 out:
321 return IRQ_HANDLED;
322}
323
324static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
325{
326 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
327 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
328 unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
329
330 if (ufcon & S3C2410_UFCON_FIFOMODE) {
331 if ((ufstat & info->tx_fifomask) != 0 ||
332 (ufstat & info->tx_fifofull))
333 return 0;
334
335 return 1;
336 }
337
338 return s3c24xx_serial_txempty_nofifo(port);
339}
340
341/* no modem control lines */
342static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
343{
344 unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
345
346 if (umstat & S3C2410_UMSTAT_CTS)
347 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
348 else
349 return TIOCM_CAR | TIOCM_DSR;
350}
351
352static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
353{
354 /* todo - possibly remove AFC and do manual CTS */
355}
356
357static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
358{
359 unsigned long flags;
360 unsigned int ucon;
361
362 spin_lock_irqsave(&port->lock, flags);
363
364 ucon = rd_regl(port, S3C2410_UCON);
365
366 if (break_state)
367 ucon |= S3C2410_UCON_SBREAK;
368 else
369 ucon &= ~S3C2410_UCON_SBREAK;
370
371 wr_regl(port, S3C2410_UCON, ucon);
372
373 spin_unlock_irqrestore(&port->lock, flags);
374}
375
376static void s3c24xx_serial_shutdown(struct uart_port *port)
377{
378 struct s3c24xx_uart_port *ourport = to_ourport(port);
379
380 if (ourport->tx_claimed) {
Ben Dooksb73c2892008-10-21 14:07:04 +0100381 free_irq(ourport->tx_irq, ourport);
Ben Dooksb4975492008-07-03 12:32:51 +0100382 tx_enabled(port) = 0;
383 ourport->tx_claimed = 0;
384 }
385
386 if (ourport->rx_claimed) {
Ben Dooksb73c2892008-10-21 14:07:04 +0100387 free_irq(ourport->rx_irq, ourport);
Ben Dooksb4975492008-07-03 12:32:51 +0100388 ourport->rx_claimed = 0;
389 rx_enabled(port) = 0;
390 }
391}
392
393
394static int s3c24xx_serial_startup(struct uart_port *port)
395{
396 struct s3c24xx_uart_port *ourport = to_ourport(port);
397 int ret;
398
399 dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
400 port->mapbase, port->membase);
401
402 rx_enabled(port) = 1;
403
Ben Dooksb73c2892008-10-21 14:07:04 +0100404 ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
Ben Dooksb4975492008-07-03 12:32:51 +0100405 s3c24xx_serial_portname(port), ourport);
406
407 if (ret != 0) {
Ben Dooksb73c2892008-10-21 14:07:04 +0100408 printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
Ben Dooksb4975492008-07-03 12:32:51 +0100409 return ret;
410 }
411
412 ourport->rx_claimed = 1;
413
414 dbg("requesting tx irq...\n");
415
416 tx_enabled(port) = 1;
417
Ben Dooksb73c2892008-10-21 14:07:04 +0100418 ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
Ben Dooksb4975492008-07-03 12:32:51 +0100419 s3c24xx_serial_portname(port), ourport);
420
421 if (ret) {
Ben Dooksb73c2892008-10-21 14:07:04 +0100422 printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
Ben Dooksb4975492008-07-03 12:32:51 +0100423 goto err;
424 }
425
426 ourport->tx_claimed = 1;
427
428 dbg("s3c24xx_serial_startup ok\n");
429
430 /* the port reset code should have done the correct
431 * register setup for the port controls */
432
433 return ret;
434
435 err:
436 s3c24xx_serial_shutdown(port);
437 return ret;
438}
439
440/* power power management control */
441
442static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
443 unsigned int old)
444{
445 struct s3c24xx_uart_port *ourport = to_ourport(port);
446
Ben Dooks30555472008-10-21 14:06:36 +0100447 ourport->pm_level = level;
448
Ben Dooksb4975492008-07-03 12:32:51 +0100449 switch (level) {
450 case 3:
451 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
452 clk_disable(ourport->baudclk);
453
454 clk_disable(ourport->clk);
455 break;
456
457 case 0:
458 clk_enable(ourport->clk);
459
460 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
461 clk_enable(ourport->baudclk);
462
463 break;
464 default:
465 printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
466 }
467}
468
469/* baud rate calculation
470 *
471 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
472 * of different sources, including the peripheral clock ("pclk") and an
473 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
474 * with a programmable extra divisor.
475 *
476 * The following code goes through the clock sources, and calculates the
477 * baud clocks (and the resultant actual baud rates) and then tries to
478 * pick the closest one and select that.
479 *
480*/
481
482
483#define MAX_CLKS (8)
484
485static struct s3c24xx_uart_clksrc tmp_clksrc = {
486 .name = "pclk",
487 .min_baud = 0,
488 .max_baud = 0,
489 .divisor = 1,
490};
491
492static inline int
493s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
494{
495 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
496
497 return (info->get_clksrc)(port, c);
498}
499
500static inline int
501s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
502{
503 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
504
505 return (info->set_clksrc)(port, c);
506}
507
508struct baud_calc {
509 struct s3c24xx_uart_clksrc *clksrc;
510 unsigned int calc;
Ben Dooks090f8482008-12-12 00:24:21 +0000511 unsigned int divslot;
Ben Dooksb4975492008-07-03 12:32:51 +0100512 unsigned int quot;
513 struct clk *src;
514};
515
516static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
517 struct uart_port *port,
518 struct s3c24xx_uart_clksrc *clksrc,
519 unsigned int baud)
520{
Ben Dooks090f8482008-12-12 00:24:21 +0000521 struct s3c24xx_uart_port *ourport = to_ourport(port);
Ben Dooksb4975492008-07-03 12:32:51 +0100522 unsigned long rate;
523
524 calc->src = clk_get(port->dev, clksrc->name);
525 if (calc->src == NULL || IS_ERR(calc->src))
526 return 0;
527
528 rate = clk_get_rate(calc->src);
529 rate /= clksrc->divisor;
530
531 calc->clksrc = clksrc;
Ben Dooks090f8482008-12-12 00:24:21 +0000532
533 if (ourport->info->has_divslot) {
534 unsigned long div = rate / baud;
535
536 /* The UDIVSLOT register on the newer UARTs allows us to
537 * get a divisor adjustment of 1/16th on the baud clock.
538 *
539 * We don't keep the UDIVSLOT value (the 16ths we calculated
540 * by not multiplying the baud by 16) as it is easy enough
541 * to recalculate.
542 */
543
544 calc->quot = div / 16;
545 calc->calc = rate / div;
546 } else {
547 calc->quot = (rate + (8 * baud)) / (16 * baud);
548 calc->calc = (rate / (calc->quot * 16));
549 }
Ben Dooksb4975492008-07-03 12:32:51 +0100550
551 calc->quot--;
552 return 1;
553}
554
555static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
556 struct s3c24xx_uart_clksrc **clksrc,
557 struct clk **clk,
558 unsigned int baud)
559{
560 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
561 struct s3c24xx_uart_clksrc *clkp;
562 struct baud_calc res[MAX_CLKS];
563 struct baud_calc *resptr, *best, *sptr;
564 int i;
565
566 clkp = cfg->clocks;
567 best = NULL;
568
569 if (cfg->clocks_size < 2) {
570 if (cfg->clocks_size == 0)
571 clkp = &tmp_clksrc;
572
573 /* check to see if we're sourcing fclk, and if so we're
574 * going to have to update the clock source
575 */
576
577 if (strcmp(clkp->name, "fclk") == 0) {
578 struct s3c24xx_uart_clksrc src;
579
580 s3c24xx_serial_getsource(port, &src);
581
582 /* check that the port already using fclk, and if
583 * not, then re-select fclk
584 */
585
586 if (strcmp(src.name, clkp->name) == 0) {
587 s3c24xx_serial_setsource(port, clkp);
588 s3c24xx_serial_getsource(port, &src);
589 }
590
591 clkp->divisor = src.divisor;
592 }
593
594 s3c24xx_serial_calcbaud(res, port, clkp, baud);
595 best = res;
596 resptr = best + 1;
597 } else {
598 resptr = res;
599
600 for (i = 0; i < cfg->clocks_size; i++, clkp++) {
601 if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
602 resptr++;
603 }
604 }
605
606 /* ok, we now need to select the best clock we found */
607
608 if (!best) {
609 unsigned int deviation = (1<<30)|((1<<30)-1);
610 int calc_deviation;
611
612 for (sptr = res; sptr < resptr; sptr++) {
613 calc_deviation = baud - sptr->calc;
614 if (calc_deviation < 0)
615 calc_deviation = -calc_deviation;
616
617 if (calc_deviation < deviation) {
618 best = sptr;
619 deviation = calc_deviation;
620 }
621 }
622 }
623
624 /* store results to pass back */
625
626 *clksrc = best->clksrc;
627 *clk = best->src;
628
629 return best->quot;
630}
631
Ben Dooks090f8482008-12-12 00:24:21 +0000632/* udivslot_table[]
633 *
634 * This table takes the fractional value of the baud divisor and gives
635 * the recommended setting for the UDIVSLOT register.
636 */
637static u16 udivslot_table[16] = {
638 [0] = 0x0000,
639 [1] = 0x0080,
640 [2] = 0x0808,
641 [3] = 0x0888,
642 [4] = 0x2222,
643 [5] = 0x4924,
644 [6] = 0x4A52,
645 [7] = 0x54AA,
646 [8] = 0x5555,
647 [9] = 0xD555,
648 [10] = 0xD5D5,
649 [11] = 0xDDD5,
650 [12] = 0xDDDD,
651 [13] = 0xDFDD,
652 [14] = 0xDFDF,
653 [15] = 0xFFDF,
654};
655
Ben Dooksb4975492008-07-03 12:32:51 +0100656static void s3c24xx_serial_set_termios(struct uart_port *port,
657 struct ktermios *termios,
658 struct ktermios *old)
659{
660 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
661 struct s3c24xx_uart_port *ourport = to_ourport(port);
662 struct s3c24xx_uart_clksrc *clksrc = NULL;
663 struct clk *clk = NULL;
664 unsigned long flags;
665 unsigned int baud, quot;
666 unsigned int ulcon;
667 unsigned int umcon;
Ben Dooks090f8482008-12-12 00:24:21 +0000668 unsigned int udivslot = 0;
Ben Dooksb4975492008-07-03 12:32:51 +0100669
670 /*
671 * We don't support modem control lines.
672 */
673 termios->c_cflag &= ~(HUPCL | CMSPAR);
674 termios->c_cflag |= CLOCAL;
675
676 /*
677 * Ask the core to calculate the divisor for us.
678 */
679
680 baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
681
682 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
683 quot = port->custom_divisor;
684 else
685 quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
686
687 /* check to see if we need to change clock source */
688
689 if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
Ben Dooks090f8482008-12-12 00:24:21 +0000690 dbg("selecting clock %p\n", clk);
Ben Dooksb4975492008-07-03 12:32:51 +0100691 s3c24xx_serial_setsource(port, clksrc);
692
693 if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
694 clk_disable(ourport->baudclk);
695 ourport->baudclk = NULL;
696 }
697
698 clk_enable(clk);
699
700 ourport->clksrc = clksrc;
701 ourport->baudclk = clk;
Ben Dooks30555472008-10-21 14:06:36 +0100702 ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
Ben Dooksb4975492008-07-03 12:32:51 +0100703 }
704
Ben Dooks090f8482008-12-12 00:24:21 +0000705 if (ourport->info->has_divslot) {
706 unsigned int div = ourport->baudclk_rate / baud;
707
708 udivslot = udivslot_table[div & 15];
709 dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
710 }
711
Ben Dooksb4975492008-07-03 12:32:51 +0100712 switch (termios->c_cflag & CSIZE) {
713 case CS5:
714 dbg("config: 5bits/char\n");
715 ulcon = S3C2410_LCON_CS5;
716 break;
717 case CS6:
718 dbg("config: 6bits/char\n");
719 ulcon = S3C2410_LCON_CS6;
720 break;
721 case CS7:
722 dbg("config: 7bits/char\n");
723 ulcon = S3C2410_LCON_CS7;
724 break;
725 case CS8:
726 default:
727 dbg("config: 8bits/char\n");
728 ulcon = S3C2410_LCON_CS8;
729 break;
730 }
731
732 /* preserve original lcon IR settings */
733 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
734
735 if (termios->c_cflag & CSTOPB)
736 ulcon |= S3C2410_LCON_STOPB;
737
738 umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
739
740 if (termios->c_cflag & PARENB) {
741 if (termios->c_cflag & PARODD)
742 ulcon |= S3C2410_LCON_PODD;
743 else
744 ulcon |= S3C2410_LCON_PEVEN;
745 } else {
746 ulcon |= S3C2410_LCON_PNONE;
747 }
748
749 spin_lock_irqsave(&port->lock, flags);
750
Ben Dooks090f8482008-12-12 00:24:21 +0000751 dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
752 ulcon, quot, udivslot);
Ben Dooksb4975492008-07-03 12:32:51 +0100753
754 wr_regl(port, S3C2410_ULCON, ulcon);
755 wr_regl(port, S3C2410_UBRDIV, quot);
756 wr_regl(port, S3C2410_UMCON, umcon);
757
Ben Dooks090f8482008-12-12 00:24:21 +0000758 if (ourport->info->has_divslot)
759 wr_regl(port, S3C2443_DIVSLOT, udivslot);
760
Ben Dooksb4975492008-07-03 12:32:51 +0100761 dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
762 rd_regl(port, S3C2410_ULCON),
763 rd_regl(port, S3C2410_UCON),
764 rd_regl(port, S3C2410_UFCON));
765
766 /*
767 * Update the per-port timeout.
768 */
769 uart_update_timeout(port, termios->c_cflag, baud);
770
771 /*
772 * Which character status flags are we interested in?
773 */
774 port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
775 if (termios->c_iflag & INPCK)
776 port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
777
778 /*
779 * Which character status flags should we ignore?
780 */
781 port->ignore_status_mask = 0;
782 if (termios->c_iflag & IGNPAR)
783 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
784 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
785 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
786
787 /*
788 * Ignore all characters if CREAD is not set.
789 */
790 if ((termios->c_cflag & CREAD) == 0)
791 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
792
793 spin_unlock_irqrestore(&port->lock, flags);
794}
795
796static const char *s3c24xx_serial_type(struct uart_port *port)
797{
798 switch (port->type) {
799 case PORT_S3C2410:
800 return "S3C2410";
801 case PORT_S3C2440:
802 return "S3C2440";
803 case PORT_S3C2412:
804 return "S3C2412";
Ben Dooksb690ace2008-10-21 14:07:03 +0100805 case PORT_S3C6400:
806 return "S3C6400/10";
Ben Dooksb4975492008-07-03 12:32:51 +0100807 default:
808 return NULL;
809 }
810}
811
812#define MAP_SIZE (0x100)
813
814static void s3c24xx_serial_release_port(struct uart_port *port)
815{
816 release_mem_region(port->mapbase, MAP_SIZE);
817}
818
819static int s3c24xx_serial_request_port(struct uart_port *port)
820{
821 const char *name = s3c24xx_serial_portname(port);
822 return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
823}
824
825static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
826{
827 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
828
829 if (flags & UART_CONFIG_TYPE &&
830 s3c24xx_serial_request_port(port) == 0)
831 port->type = info->type;
832}
833
834/*
835 * verify the new serial_struct (for TIOCSSERIAL).
836 */
837static int
838s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
839{
840 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
841
842 if (ser->type != PORT_UNKNOWN && ser->type != info->type)
843 return -EINVAL;
844
845 return 0;
846}
847
848
849#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
850
851static struct console s3c24xx_serial_console;
852
853#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
854#else
855#define S3C24XX_SERIAL_CONSOLE NULL
856#endif
857
858static struct uart_ops s3c24xx_serial_ops = {
859 .pm = s3c24xx_serial_pm,
860 .tx_empty = s3c24xx_serial_tx_empty,
861 .get_mctrl = s3c24xx_serial_get_mctrl,
862 .set_mctrl = s3c24xx_serial_set_mctrl,
863 .stop_tx = s3c24xx_serial_stop_tx,
864 .start_tx = s3c24xx_serial_start_tx,
865 .stop_rx = s3c24xx_serial_stop_rx,
866 .enable_ms = s3c24xx_serial_enable_ms,
867 .break_ctl = s3c24xx_serial_break_ctl,
868 .startup = s3c24xx_serial_startup,
869 .shutdown = s3c24xx_serial_shutdown,
870 .set_termios = s3c24xx_serial_set_termios,
871 .type = s3c24xx_serial_type,
872 .release_port = s3c24xx_serial_release_port,
873 .request_port = s3c24xx_serial_request_port,
874 .config_port = s3c24xx_serial_config_port,
875 .verify_port = s3c24xx_serial_verify_port,
876};
877
878
879static struct uart_driver s3c24xx_uart_drv = {
880 .owner = THIS_MODULE,
881 .dev_name = "s3c2410_serial",
Ben Dooksbdd49152008-11-03 19:51:42 +0000882 .nr = CONFIG_SERIAL_SAMSUNG_UARTS,
Ben Dooksb4975492008-07-03 12:32:51 +0100883 .cons = S3C24XX_SERIAL_CONSOLE,
884 .driver_name = S3C24XX_SERIAL_NAME,
885 .major = S3C24XX_SERIAL_MAJOR,
886 .minor = S3C24XX_SERIAL_MINOR,
887};
888
Ben Dooks03d5e772008-11-03 09:21:23 +0000889static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
Ben Dooksb4975492008-07-03 12:32:51 +0100890 [0] = {
891 .port = {
892 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
893 .iotype = UPIO_MEM,
894 .irq = IRQ_S3CUART_RX0,
895 .uartclk = 0,
896 .fifosize = 16,
897 .ops = &s3c24xx_serial_ops,
898 .flags = UPF_BOOT_AUTOCONF,
899 .line = 0,
900 }
901 },
902 [1] = {
903 .port = {
904 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
905 .iotype = UPIO_MEM,
906 .irq = IRQ_S3CUART_RX1,
907 .uartclk = 0,
908 .fifosize = 16,
909 .ops = &s3c24xx_serial_ops,
910 .flags = UPF_BOOT_AUTOCONF,
911 .line = 1,
912 }
913 },
Ben Dooks03d5e772008-11-03 09:21:23 +0000914#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
Ben Dooksb4975492008-07-03 12:32:51 +0100915
916 [2] = {
917 .port = {
918 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
919 .iotype = UPIO_MEM,
920 .irq = IRQ_S3CUART_RX2,
921 .uartclk = 0,
922 .fifosize = 16,
923 .ops = &s3c24xx_serial_ops,
924 .flags = UPF_BOOT_AUTOCONF,
925 .line = 2,
926 }
Ben Dooks03d5e772008-11-03 09:21:23 +0000927 },
928#endif
929#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
930 [3] = {
931 .port = {
932 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
933 .iotype = UPIO_MEM,
934 .irq = IRQ_S3CUART_RX3,
935 .uartclk = 0,
936 .fifosize = 16,
937 .ops = &s3c24xx_serial_ops,
938 .flags = UPF_BOOT_AUTOCONF,
939 .line = 3,
940 }
Ben Dooksb4975492008-07-03 12:32:51 +0100941 }
942#endif
943};
944
945/* s3c24xx_serial_resetport
946 *
947 * wrapper to call the specific reset for this port (reset the fifos
948 * and the settings)
949*/
950
951static inline int s3c24xx_serial_resetport(struct uart_port *port,
952 struct s3c2410_uartcfg *cfg)
953{
954 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
955
956 return (info->reset_port)(port, cfg);
957}
958
Ben Dooks30555472008-10-21 14:06:36 +0100959
960#ifdef CONFIG_CPU_FREQ
961
962static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
963 unsigned long val, void *data)
964{
965 struct s3c24xx_uart_port *port;
966 struct uart_port *uport;
967
968 port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
969 uport = &port->port;
970
971 /* check to see if port is enabled */
972
973 if (port->pm_level != 0)
974 return 0;
975
976 /* try and work out if the baudrate is changing, we can detect
977 * a change in rate, but we do not have support for detecting
978 * a disturbance in the clock-rate over the change.
979 */
980
981 if (IS_ERR(port->clk))
982 goto exit;
983
984 if (port->baudclk_rate == clk_get_rate(port->clk))
985 goto exit;
986
987 if (val == CPUFREQ_PRECHANGE) {
988 /* we should really shut the port down whilst the
989 * frequency change is in progress. */
990
991 } else if (val == CPUFREQ_POSTCHANGE) {
992 struct ktermios *termios;
993 struct tty_struct *tty;
994
Alan Coxebd2c8f2009-09-19 13:13:28 -0700995 if (uport->state == NULL)
Ben Dooks30555472008-10-21 14:06:36 +0100996 goto exit;
Ben Dooks30555472008-10-21 14:06:36 +0100997
Alan Coxebd2c8f2009-09-19 13:13:28 -0700998 tty = uport->state->port.tty;
Ben Dooks30555472008-10-21 14:06:36 +0100999
Ben Dooks7de40c22008-12-14 23:11:02 +00001000 if (tty == NULL)
Ben Dooks30555472008-10-21 14:06:36 +01001001 goto exit;
Ben Dooks30555472008-10-21 14:06:36 +01001002
1003 termios = tty->termios;
1004
1005 if (termios == NULL) {
1006 printk(KERN_WARNING "%s: no termios?\n", __func__);
1007 goto exit;
1008 }
1009
1010 s3c24xx_serial_set_termios(uport, termios, NULL);
1011 }
1012
1013 exit:
1014 return 0;
1015}
1016
1017static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1018{
1019 port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
1020
1021 return cpufreq_register_notifier(&port->freq_transition,
1022 CPUFREQ_TRANSITION_NOTIFIER);
1023}
1024
1025static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1026{
1027 cpufreq_unregister_notifier(&port->freq_transition,
1028 CPUFREQ_TRANSITION_NOTIFIER);
1029}
1030
1031#else
1032static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1033{
1034 return 0;
1035}
1036
1037static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1038{
1039}
1040#endif
1041
Ben Dooksb4975492008-07-03 12:32:51 +01001042/* s3c24xx_serial_init_port
1043 *
1044 * initialise a single serial port from the platform device given
1045 */
1046
1047static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
1048 struct s3c24xx_uart_info *info,
1049 struct platform_device *platdev)
1050{
1051 struct uart_port *port = &ourport->port;
1052 struct s3c2410_uartcfg *cfg;
1053 struct resource *res;
1054 int ret;
1055
1056 dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
1057
1058 if (platdev == NULL)
1059 return -ENODEV;
1060
1061 cfg = s3c24xx_dev_to_cfg(&platdev->dev);
1062
1063 if (port->mapbase != 0)
1064 return 0;
1065
Ben Dooksbdd49152008-11-03 19:51:42 +00001066 if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
1067 printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
1068 cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
1069 return -ERANGE;
1070 }
Ben Dooksb4975492008-07-03 12:32:51 +01001071
1072 /* setup info for port */
1073 port->dev = &platdev->dev;
1074 ourport->info = info;
1075
1076 /* copy the info in from provided structure */
1077 ourport->port.fifosize = info->fifosize;
1078
1079 dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
1080
1081 port->uartclk = 1;
1082
1083 if (cfg->uart_flags & UPF_CONS_FLOW) {
1084 dbg("s3c24xx_serial_init_port: enabling flow control\n");
1085 port->flags |= UPF_CONS_FLOW;
1086 }
1087
1088 /* sort our the physical and virtual addresses for each UART */
1089
1090 res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
1091 if (res == NULL) {
1092 printk(KERN_ERR "failed to find memory resource for uart\n");
1093 return -EINVAL;
1094 }
1095
1096 dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
1097
Ben Dooksb690ace2008-10-21 14:07:03 +01001098 port->mapbase = res->start;
1099 port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
Ben Dooksb4975492008-07-03 12:32:51 +01001100 ret = platform_get_irq(platdev, 0);
1101 if (ret < 0)
1102 port->irq = 0;
Ben Dooksb73c2892008-10-21 14:07:04 +01001103 else {
Ben Dooksb4975492008-07-03 12:32:51 +01001104 port->irq = ret;
Ben Dooksb73c2892008-10-21 14:07:04 +01001105 ourport->rx_irq = ret;
1106 ourport->tx_irq = ret + 1;
1107 }
1108
1109 ret = platform_get_irq(platdev, 1);
1110 if (ret > 0)
1111 ourport->tx_irq = ret;
Ben Dooksb4975492008-07-03 12:32:51 +01001112
1113 ourport->clk = clk_get(&platdev->dev, "uart");
1114
Ben Dooksb73c2892008-10-21 14:07:04 +01001115 dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
1116 port->mapbase, port->membase, port->irq,
1117 ourport->rx_irq, ourport->tx_irq, port->uartclk);
Ben Dooksb4975492008-07-03 12:32:51 +01001118
1119 /* reset the fifos (and setup the uart) */
1120 s3c24xx_serial_resetport(port, cfg);
1121 return 0;
1122}
1123
1124static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
1125 struct device_attribute *attr,
1126 char *buf)
1127{
1128 struct uart_port *port = s3c24xx_dev_to_port(dev);
1129 struct s3c24xx_uart_port *ourport = to_ourport(port);
1130
1131 return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
1132}
1133
1134static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
1135
1136/* Device driver serial port probe */
1137
1138static int probe_index;
1139
1140int s3c24xx_serial_probe(struct platform_device *dev,
1141 struct s3c24xx_uart_info *info)
1142{
1143 struct s3c24xx_uart_port *ourport;
1144 int ret;
1145
1146 dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
1147
1148 ourport = &s3c24xx_serial_ports[probe_index];
1149 probe_index++;
1150
1151 dbg("%s: initialising port %p...\n", __func__, ourport);
1152
1153 ret = s3c24xx_serial_init_port(ourport, info, dev);
1154 if (ret < 0)
1155 goto probe_err;
1156
1157 dbg("%s: adding port\n", __func__);
1158 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
1159 platform_set_drvdata(dev, &ourport->port);
1160
1161 ret = device_create_file(&dev->dev, &dev_attr_clock_source);
1162 if (ret < 0)
1163 printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
1164
Ben Dooks30555472008-10-21 14:06:36 +01001165 ret = s3c24xx_serial_cpufreq_register(ourport);
1166 if (ret < 0)
1167 dev_err(&dev->dev, "failed to add cpufreq notifier\n");
1168
Ben Dooksb4975492008-07-03 12:32:51 +01001169 return 0;
1170
1171 probe_err:
1172 return ret;
1173}
1174
1175EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
1176
Peter Korsgaard90ceb962009-06-22 18:42:49 +01001177int __devexit s3c24xx_serial_remove(struct platform_device *dev)
Ben Dooksb4975492008-07-03 12:32:51 +01001178{
1179 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1180
1181 if (port) {
Ben Dooks30555472008-10-21 14:06:36 +01001182 s3c24xx_serial_cpufreq_deregister(to_ourport(port));
Ben Dooksb4975492008-07-03 12:32:51 +01001183 device_remove_file(&dev->dev, &dev_attr_clock_source);
1184 uart_remove_one_port(&s3c24xx_uart_drv, port);
1185 }
1186
1187 return 0;
1188}
1189
1190EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
1191
1192/* UART power management code */
1193
1194#ifdef CONFIG_PM
1195
1196static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
1197{
1198 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1199
1200 if (port)
1201 uart_suspend_port(&s3c24xx_uart_drv, port);
1202
1203 return 0;
1204}
1205
1206static int s3c24xx_serial_resume(struct platform_device *dev)
1207{
1208 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1209 struct s3c24xx_uart_port *ourport = to_ourport(port);
1210
1211 if (port) {
1212 clk_enable(ourport->clk);
1213 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
1214 clk_disable(ourport->clk);
1215
1216 uart_resume_port(&s3c24xx_uart_drv, port);
1217 }
1218
1219 return 0;
1220}
1221#endif
1222
1223int s3c24xx_serial_init(struct platform_driver *drv,
1224 struct s3c24xx_uart_info *info)
1225{
1226 dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
1227
1228#ifdef CONFIG_PM
1229 drv->suspend = s3c24xx_serial_suspend;
1230 drv->resume = s3c24xx_serial_resume;
1231#endif
1232
1233 return platform_driver_register(drv);
1234}
1235
1236EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
1237
1238/* module initialisation code */
1239
1240static int __init s3c24xx_serial_modinit(void)
1241{
1242 int ret;
1243
1244 ret = uart_register_driver(&s3c24xx_uart_drv);
1245 if (ret < 0) {
1246 printk(KERN_ERR "failed to register UART driver\n");
1247 return -1;
1248 }
1249
1250 return 0;
1251}
1252
1253static void __exit s3c24xx_serial_modexit(void)
1254{
1255 uart_unregister_driver(&s3c24xx_uart_drv);
1256}
1257
1258module_init(s3c24xx_serial_modinit);
1259module_exit(s3c24xx_serial_modexit);
1260
1261/* Console code */
1262
1263#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1264
1265static struct uart_port *cons_uart;
1266
1267static int
1268s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
1269{
1270 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1271 unsigned long ufstat, utrstat;
1272
1273 if (ufcon & S3C2410_UFCON_FIFOMODE) {
1274 /* fifo mode - check ammount of data in fifo registers... */
1275
1276 ufstat = rd_regl(port, S3C2410_UFSTAT);
1277 return (ufstat & info->tx_fifofull) ? 0 : 1;
1278 }
1279
1280 /* in non-fifo mode, we go and use the tx buffer empty */
1281
1282 utrstat = rd_regl(port, S3C2410_UTRSTAT);
1283 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
1284}
1285
1286static void
1287s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
1288{
1289 unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
1290 while (!s3c24xx_serial_console_txrdy(port, ufcon))
1291 barrier();
1292 wr_regb(cons_uart, S3C2410_UTXH, ch);
1293}
1294
1295static void
1296s3c24xx_serial_console_write(struct console *co, const char *s,
1297 unsigned int count)
1298{
1299 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
1300}
1301
1302static void __init
1303s3c24xx_serial_get_options(struct uart_port *port, int *baud,
1304 int *parity, int *bits)
1305{
1306 struct s3c24xx_uart_clksrc clksrc;
1307 struct clk *clk;
1308 unsigned int ulcon;
1309 unsigned int ucon;
1310 unsigned int ubrdiv;
1311 unsigned long rate;
1312
1313 ulcon = rd_regl(port, S3C2410_ULCON);
1314 ucon = rd_regl(port, S3C2410_UCON);
1315 ubrdiv = rd_regl(port, S3C2410_UBRDIV);
1316
1317 dbg("s3c24xx_serial_get_options: port=%p\n"
1318 "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
1319 port, ulcon, ucon, ubrdiv);
1320
1321 if ((ucon & 0xf) != 0) {
1322 /* consider the serial port configured if the tx/rx mode set */
1323
1324 switch (ulcon & S3C2410_LCON_CSMASK) {
1325 case S3C2410_LCON_CS5:
1326 *bits = 5;
1327 break;
1328 case S3C2410_LCON_CS6:
1329 *bits = 6;
1330 break;
1331 case S3C2410_LCON_CS7:
1332 *bits = 7;
1333 break;
1334 default:
1335 case S3C2410_LCON_CS8:
1336 *bits = 8;
1337 break;
1338 }
1339
1340 switch (ulcon & S3C2410_LCON_PMASK) {
1341 case S3C2410_LCON_PEVEN:
1342 *parity = 'e';
1343 break;
1344
1345 case S3C2410_LCON_PODD:
1346 *parity = 'o';
1347 break;
1348
1349 case S3C2410_LCON_PNONE:
1350 default:
1351 *parity = 'n';
1352 }
1353
1354 /* now calculate the baud rate */
1355
1356 s3c24xx_serial_getsource(port, &clksrc);
1357
1358 clk = clk_get(port->dev, clksrc.name);
1359 if (!IS_ERR(clk) && clk != NULL)
1360 rate = clk_get_rate(clk) / clksrc.divisor;
1361 else
1362 rate = 1;
1363
1364
1365 *baud = rate / (16 * (ubrdiv + 1));
1366 dbg("calculated baud %d\n", *baud);
1367 }
1368
1369}
1370
1371/* s3c24xx_serial_init_ports
1372 *
1373 * initialise the serial ports from the machine provided initialisation
1374 * data.
1375*/
1376
1377static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
1378{
1379 struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
1380 struct platform_device **platdev_ptr;
1381 int i;
1382
1383 dbg("s3c24xx_serial_init_ports: initialising ports...\n");
1384
1385 platdev_ptr = s3c24xx_uart_devs;
1386
Ben Dooks03d5e772008-11-03 09:21:23 +00001387 for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
Ben Dooksb4975492008-07-03 12:32:51 +01001388 s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
1389 }
1390
1391 return 0;
1392}
1393
1394static int __init
1395s3c24xx_serial_console_setup(struct console *co, char *options)
1396{
1397 struct uart_port *port;
1398 int baud = 9600;
1399 int bits = 8;
1400 int parity = 'n';
1401 int flow = 'n';
1402
1403 dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
1404 co, co->index, options);
1405
1406 /* is this a valid port */
1407
Ben Dooks03d5e772008-11-03 09:21:23 +00001408 if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
Ben Dooksb4975492008-07-03 12:32:51 +01001409 co->index = 0;
1410
1411 port = &s3c24xx_serial_ports[co->index].port;
1412
1413 /* is the port configured? */
1414
1415 if (port->mapbase == 0x0) {
1416 co->index = 0;
1417 port = &s3c24xx_serial_ports[co->index].port;
1418 }
1419
1420 cons_uart = port;
1421
1422 dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
1423
1424 /*
1425 * Check whether an invalid uart number has been specified, and
1426 * if so, search for the first available port that does have
1427 * console support.
1428 */
1429 if (options)
1430 uart_parse_options(options, &baud, &parity, &bits, &flow);
1431 else
1432 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
1433
1434 dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
1435
1436 return uart_set_options(port, co, baud, parity, bits, flow);
1437}
1438
1439/* s3c24xx_serial_initconsole
1440 *
1441 * initialise the console from one of the uart drivers
1442*/
1443
1444static struct console s3c24xx_serial_console = {
1445 .name = S3C24XX_SERIAL_NAME,
1446 .device = uart_console_device,
1447 .flags = CON_PRINTBUFFER,
1448 .index = -1,
1449 .write = s3c24xx_serial_console_write,
1450 .setup = s3c24xx_serial_console_setup
1451};
1452
1453int s3c24xx_serial_initconsole(struct platform_driver *drv,
1454 struct s3c24xx_uart_info *info)
1455
1456{
1457 struct platform_device *dev = s3c24xx_uart_devs[0];
1458
1459 dbg("s3c24xx_serial_initconsole\n");
1460
1461 /* select driver based on the cpu */
1462
1463 if (dev == NULL) {
1464 printk(KERN_ERR "s3c24xx: no devices for console init\n");
1465 return 0;
1466 }
1467
1468 if (strcmp(dev->name, drv->driver.name) != 0)
1469 return 0;
1470
1471 s3c24xx_serial_console.data = &s3c24xx_uart_drv;
1472 s3c24xx_serial_init_ports(info);
1473
1474 register_console(&s3c24xx_serial_console);
1475 return 0;
1476}
1477
1478#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
1479
1480MODULE_DESCRIPTION("Samsung SoC Serial port driver");
1481MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
1482MODULE_LICENSE("GPL v2");