Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* $Id: nj_u.c,v 2.14.2.3 2004/01/13 14:31:26 keil Exp $ |
| 2 | * |
| 3 | * This software may be used and distributed according to the terms |
| 4 | * of the GNU General Public License, incorporated herein by reference. |
| 5 | * |
| 6 | */ |
| 7 | |
| 8 | #include <linux/config.h> |
| 9 | #include <linux/init.h> |
| 10 | #include "hisax.h" |
| 11 | #include "icc.h" |
| 12 | #include "isdnl1.h" |
| 13 | #include <linux/pci.h> |
| 14 | #include <linux/interrupt.h> |
| 15 | #include <linux/ppp_defs.h> |
| 16 | #include "netjet.h" |
| 17 | |
Adrian Bunk | 672c3fd | 2005-06-25 14:59:18 -0700 | [diff] [blame^] | 18 | static const char *NETjet_U_revision = "$Revision: 2.14.2.3 $"; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 19 | |
| 20 | static u_char dummyrr(struct IsdnCardState *cs, int chan, u_char off) |
| 21 | { |
| 22 | return(5); |
| 23 | } |
| 24 | |
| 25 | static void dummywr(struct IsdnCardState *cs, int chan, u_char off, u_char value) |
| 26 | { |
| 27 | } |
| 28 | |
| 29 | static irqreturn_t |
| 30 | netjet_u_interrupt(int intno, void *dev_id, struct pt_regs *regs) |
| 31 | { |
| 32 | struct IsdnCardState *cs = dev_id; |
| 33 | u_char val, sval; |
| 34 | u_long flags; |
| 35 | |
| 36 | spin_lock_irqsave(&cs->lock, flags); |
| 37 | if (!((sval = bytein(cs->hw.njet.base + NETJET_IRQSTAT1)) & |
| 38 | NETJET_ISACIRQ)) { |
| 39 | val = NETjet_ReadIC(cs, ICC_ISTA); |
| 40 | if (cs->debug & L1_DEB_ISAC) |
| 41 | debugl1(cs, "tiger: i1 %x %x", sval, val); |
| 42 | if (val) { |
| 43 | icc_interrupt(cs, val); |
| 44 | NETjet_WriteIC(cs, ICC_MASK, 0xFF); |
| 45 | NETjet_WriteIC(cs, ICC_MASK, 0x0); |
| 46 | } |
| 47 | } |
| 48 | /* start new code 13/07/00 GE */ |
| 49 | /* set bits in sval to indicate which page is free */ |
| 50 | if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) < |
| 51 | inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ)) |
| 52 | /* the 2nd write page is free */ |
| 53 | sval = 0x08; |
| 54 | else /* the 1st write page is free */ |
| 55 | sval = 0x04; |
| 56 | if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) < |
| 57 | inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ)) |
| 58 | /* the 2nd read page is free */ |
| 59 | sval = sval | 0x02; |
| 60 | else /* the 1st read page is free */ |
| 61 | sval = sval | 0x01; |
| 62 | if (sval != cs->hw.njet.last_is0) /* we have a DMA interrupt */ |
| 63 | { |
| 64 | if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) { |
| 65 | spin_unlock_irqrestore(&cs->lock, flags); |
| 66 | return IRQ_HANDLED; |
| 67 | } |
| 68 | cs->hw.njet.irqstat0 = sval; |
| 69 | if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) != |
| 70 | (cs->hw.njet.last_is0 & NETJET_IRQM0_READ)) |
| 71 | /* we have a read dma int */ |
| 72 | read_tiger(cs); |
| 73 | if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) != |
| 74 | (cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE)) |
| 75 | /* we have a write dma int */ |
| 76 | write_tiger(cs); |
| 77 | /* end new code 13/07/00 GE */ |
| 78 | test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags); |
| 79 | } |
| 80 | spin_unlock_irqrestore(&cs->lock, flags); |
| 81 | return IRQ_HANDLED; |
| 82 | } |
| 83 | |
| 84 | static void |
| 85 | reset_netjet_u(struct IsdnCardState *cs) |
| 86 | { |
| 87 | cs->hw.njet.ctrl_reg = 0xff; /* Reset On */ |
| 88 | byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg); |
| 89 | mdelay(10); |
| 90 | cs->hw.njet.ctrl_reg = 0x40; /* Reset Off and status read clear */ |
| 91 | /* now edge triggered for TJ320 GE 13/07/00 */ |
| 92 | byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg); |
| 93 | mdelay(10); |
| 94 | cs->hw.njet.auxd = 0xC0; |
| 95 | cs->hw.njet.dmactrl = 0; |
| 96 | byteout(cs->hw.njet.auxa, 0); |
| 97 | byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ); |
| 98 | byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ); |
| 99 | byteout(cs->hw.njet.auxa, cs->hw.njet.auxd); |
| 100 | } |
| 101 | |
| 102 | static int |
| 103 | NETjet_U_card_msg(struct IsdnCardState *cs, int mt, void *arg) |
| 104 | { |
| 105 | u_long flags; |
| 106 | |
| 107 | switch (mt) { |
| 108 | case CARD_RESET: |
| 109 | spin_lock_irqsave(&cs->lock, flags); |
| 110 | reset_netjet_u(cs); |
| 111 | spin_unlock_irqrestore(&cs->lock, flags); |
| 112 | return(0); |
| 113 | case CARD_RELEASE: |
| 114 | release_io_netjet(cs); |
| 115 | return(0); |
| 116 | case CARD_INIT: |
| 117 | spin_lock_irqsave(&cs->lock, flags); |
| 118 | inittiger(cs); |
| 119 | reset_netjet_u(cs); |
| 120 | clear_pending_icc_ints(cs); |
| 121 | initicc(cs); |
| 122 | /* Reenable all IRQ */ |
| 123 | cs->writeisac(cs, ICC_MASK, 0); |
| 124 | spin_unlock_irqrestore(&cs->lock, flags); |
| 125 | return(0); |
| 126 | case CARD_TEST: |
| 127 | return(0); |
| 128 | } |
| 129 | return(0); |
| 130 | } |
| 131 | |
| 132 | static struct pci_dev *dev_netjet __initdata = NULL; |
| 133 | |
| 134 | int __init |
| 135 | setup_netjet_u(struct IsdnCard *card) |
| 136 | { |
| 137 | int bytecnt; |
| 138 | struct IsdnCardState *cs = card->cs; |
| 139 | char tmp[64]; |
| 140 | #ifdef CONFIG_PCI |
| 141 | #endif |
| 142 | #ifdef __BIG_ENDIAN |
| 143 | #error "not running on big endian machines now" |
| 144 | #endif |
| 145 | strcpy(tmp, NETjet_U_revision); |
| 146 | printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp)); |
| 147 | if (cs->typ != ISDN_CTYPE_NETJET_U) |
| 148 | return(0); |
| 149 | test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags); |
| 150 | |
| 151 | #ifdef CONFIG_PCI |
| 152 | |
| 153 | for ( ;; ) |
| 154 | { |
| 155 | if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET, |
| 156 | PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) { |
| 157 | if (pci_enable_device(dev_netjet)) |
| 158 | return(0); |
| 159 | pci_set_master(dev_netjet); |
| 160 | cs->irq = dev_netjet->irq; |
| 161 | if (!cs->irq) { |
| 162 | printk(KERN_WARNING "NETspider-U: No IRQ for PCI card found\n"); |
| 163 | return(0); |
| 164 | } |
| 165 | cs->hw.njet.base = pci_resource_start(dev_netjet, 0); |
| 166 | if (!cs->hw.njet.base) { |
| 167 | printk(KERN_WARNING "NETspider-U: No IO-Adr for PCI card found\n"); |
| 168 | return(0); |
| 169 | } |
| 170 | } else { |
| 171 | printk(KERN_WARNING "NETspider-U: No PCI card found\n"); |
| 172 | return(0); |
| 173 | } |
| 174 | |
| 175 | cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA; |
| 176 | cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF; |
| 177 | mdelay(10); |
| 178 | |
| 179 | cs->hw.njet.ctrl_reg = 0xff; /* Reset On */ |
| 180 | byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg); |
| 181 | mdelay(10); |
| 182 | |
| 183 | cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */ |
| 184 | byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg); |
| 185 | mdelay(10); |
| 186 | |
| 187 | cs->hw.njet.auxd = 0xC0; |
| 188 | cs->hw.njet.dmactrl = 0; |
| 189 | |
| 190 | byteout(cs->hw.njet.auxa, 0); |
| 191 | byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ); |
| 192 | byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ); |
| 193 | byteout(cs->hw.njet.auxa, cs->hw.njet.auxd); |
| 194 | |
| 195 | switch ( ( ( NETjet_ReadIC( cs, ICC_RBCH ) >> 5 ) & 3 ) ) |
| 196 | { |
| 197 | case 3 : |
| 198 | break; |
| 199 | |
| 200 | case 0 : |
| 201 | printk( KERN_WARNING "NETspider-U: NETjet-S PCI card found\n" ); |
| 202 | continue; |
| 203 | |
| 204 | default : |
| 205 | printk( KERN_WARNING "NETspider-U: No PCI card found\n" ); |
| 206 | return 0; |
| 207 | } |
| 208 | break; |
| 209 | } |
| 210 | #else |
| 211 | |
| 212 | printk(KERN_WARNING "NETspider-U: NO_PCI_BIOS\n"); |
| 213 | printk(KERN_WARNING "NETspider-U: unable to config NETspider-U PCI\n"); |
| 214 | return (0); |
| 215 | |
| 216 | #endif /* CONFIG_PCI */ |
| 217 | |
| 218 | bytecnt = 256; |
| 219 | |
| 220 | printk(KERN_INFO |
| 221 | "NETspider-U: PCI card configured at %#lx IRQ %d\n", |
| 222 | cs->hw.njet.base, cs->irq); |
| 223 | if (!request_region(cs->hw.njet.base, bytecnt, "netspider-u isdn")) { |
| 224 | printk(KERN_WARNING |
| 225 | "HiSax: %s config port %#lx-%#lx already in use\n", |
| 226 | CardType[card->typ], |
| 227 | cs->hw.njet.base, |
| 228 | cs->hw.njet.base + bytecnt); |
| 229 | return (0); |
| 230 | } |
| 231 | setup_icc(cs); |
| 232 | cs->readisac = &NETjet_ReadIC; |
| 233 | cs->writeisac = &NETjet_WriteIC; |
| 234 | cs->readisacfifo = &NETjet_ReadICfifo; |
| 235 | cs->writeisacfifo = &NETjet_WriteICfifo; |
| 236 | cs->BC_Read_Reg = &dummyrr; |
| 237 | cs->BC_Write_Reg = &dummywr; |
| 238 | cs->BC_Send_Data = &netjet_fill_dma; |
| 239 | cs->cardmsg = &NETjet_U_card_msg; |
| 240 | cs->irq_func = &netjet_u_interrupt; |
| 241 | cs->irq_flags |= SA_SHIRQ; |
| 242 | ICCVersion(cs, "NETspider-U:"); |
| 243 | return (1); |
| 244 | } |