blob: 22bda05fc693f454e801ce902ec248a2416572bd [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * drivers/block/ataflop.c
3 *
4 * Copyright (C) 1993 Greg Harp
5 * Atari Support by Bjoern Brauel, Roman Hodek
6 *
7 * Big cleanup Sep 11..14 1994 Roman Hodek:
8 * - Driver now works interrupt driven
9 * - Support for two drives; should work, but I cannot test that :-(
10 * - Reading is done in whole tracks and buffered to speed up things
11 * - Disk change detection and drive deselecting after motor-off
12 * similar to TOS
13 * - Autodetection of disk format (DD/HD); untested yet, because I
14 * don't have an HD drive :-(
15 *
16 * Fixes Nov 13 1994 Martin Schaller:
17 * - Autodetection works now
18 * - Support for 5 1/4'' disks
19 * - Removed drive type (unknown on atari)
20 * - Do seeks with 8 Mhz
21 *
22 * Changes by Andreas Schwab:
23 * - After errors in multiple read mode try again reading single sectors
24 * (Feb 1995):
25 * - Clean up error handling
26 * - Set blk_size for proper size checking
27 * - Initialize track register when testing presence of floppy
28 * - Implement some ioctl's
29 *
30 * Changes by Torsten Lang:
31 * - When probing the floppies we should add the FDCCMDADD_H flag since
32 * the FDC will otherwise wait forever when no disk is inserted...
33 *
34 * ++ Freddi Aschwanden (fa) 20.9.95 fixes for medusa:
35 * - MFPDELAY() after each FDC access -> atari
36 * - more/other disk formats
37 * - DMA to the block buffer directly if we have a 32bit DMA
38 * - for medusa, the step rate is always 3ms
39 * - on medusa, use only cache_push()
40 * Roman:
41 * - Make disk format numbering independent from minors
42 * - Let user set max. supported drive type (speeds up format
43 * detection, saves buffer space)
44 *
45 * Roman 10/15/95:
46 * - implement some more ioctls
47 * - disk formatting
48 *
49 * Andreas 95/12/12:
50 * - increase gap size at start of track for HD/ED disks
51 *
52 * Michael (MSch) 11/07/96:
53 * - implemented FDSETPRM and FDDEFPRM ioctl
54 *
55 * Andreas (97/03/19):
56 * - implemented missing BLK* ioctls
57 *
58 * Things left to do:
59 * - Formatting
60 * - Maybe a better strategy for disk change detection (does anyone
61 * know one?)
62 */
63
64#include <linux/module.h>
65
66#include <linux/fd.h>
67#include <linux/delay.h>
68#include <linux/init.h>
69#include <linux/blkdev.h>
70
71#include <asm/atafd.h>
72#include <asm/atafdreg.h>
73#include <asm/atariints.h>
74#include <asm/atari_stdma.h>
75#include <asm/atari_stram.h>
76
77#define FD_MAX_UNITS 2
78
79#undef DEBUG
80
81static struct request_queue *floppy_queue;
82
83#define QUEUE (floppy_queue)
84#define CURRENT elv_next_request(floppy_queue)
85
86/* Disk types: DD, HD, ED */
87static struct atari_disk_type {
88 const char *name;
89 unsigned spt; /* sectors per track */
90 unsigned blocks; /* total number of blocks */
91 unsigned fdc_speed; /* fdc_speed setting */
92 unsigned stretch; /* track doubling ? */
93} disk_type[] = {
94 { "d360", 9, 720, 0, 0}, /* 0: 360kB diskette */
95 { "D360", 9, 720, 0, 1}, /* 1: 360kb in 720k or 1.2MB drive */
96 { "D720", 9,1440, 0, 0}, /* 2: 720kb in 720k or 1.2MB drive */
97 { "D820", 10,1640, 0, 0}, /* 3: DD disk with 82 tracks/10 sectors */
98/* formats above are probed for type DD */
99#define MAX_TYPE_DD 3
100 { "h1200",15,2400, 3, 0}, /* 4: 1.2MB diskette */
101 { "H1440",18,2880, 3, 0}, /* 5: 1.4 MB diskette (HD) */
102 { "H1640",20,3280, 3, 0}, /* 6: 1.64MB diskette (fat HD) 82 tr 20 sec */
103/* formats above are probed for types DD and HD */
104#define MAX_TYPE_HD 6
105 { "E2880",36,5760, 3, 0}, /* 7: 2.8 MB diskette (ED) */
106 { "E3280",40,6560, 3, 0}, /* 8: 3.2 MB diskette (fat ED) 82 tr 40 sec */
107/* formats above are probed for types DD, HD and ED */
108#define MAX_TYPE_ED 8
109/* types below are never autoprobed */
110 { "H1680",21,3360, 3, 0}, /* 9: 1.68MB diskette (fat HD) 80 tr 21 sec */
111 { "h410",10,820, 0, 1}, /* 10: 410k diskette 41 tr 10 sec, stretch */
112 { "h1476",18,2952, 3, 0}, /* 11: 1.48MB diskette 82 tr 18 sec */
113 { "H1722",21,3444, 3, 0}, /* 12: 1.72MB diskette 82 tr 21 sec */
114 { "h420",10,840, 0, 1}, /* 13: 420k diskette 42 tr 10 sec, stretch */
115 { "H830",10,1660, 0, 0}, /* 14: 820k diskette 83 tr 10 sec */
116 { "h1494",18,2952, 3, 0}, /* 15: 1.49MB diskette 83 tr 18 sec */
117 { "H1743",21,3486, 3, 0}, /* 16: 1.74MB diskette 83 tr 21 sec */
118 { "h880",11,1760, 0, 0}, /* 17: 880k diskette 80 tr 11 sec */
119 { "D1040",13,2080, 0, 0}, /* 18: 1.04MB diskette 80 tr 13 sec */
120 { "D1120",14,2240, 0, 0}, /* 19: 1.12MB diskette 80 tr 14 sec */
121 { "h1600",20,3200, 3, 0}, /* 20: 1.60MB diskette 80 tr 20 sec */
122 { "H1760",22,3520, 3, 0}, /* 21: 1.76MB diskette 80 tr 22 sec */
123 { "H1920",24,3840, 3, 0}, /* 22: 1.92MB diskette 80 tr 24 sec */
124 { "E3200",40,6400, 3, 0}, /* 23: 3.2MB diskette 80 tr 40 sec */
125 { "E3520",44,7040, 3, 0}, /* 24: 3.52MB diskette 80 tr 44 sec */
126 { "E3840",48,7680, 3, 0}, /* 25: 3.84MB diskette 80 tr 48 sec */
127 { "H1840",23,3680, 3, 0}, /* 26: 1.84MB diskette 80 tr 23 sec */
128 { "D800",10,1600, 0, 0}, /* 27: 800k diskette 80 tr 10 sec */
129};
130
131static int StartDiskType[] = {
132 MAX_TYPE_DD,
133 MAX_TYPE_HD,
134 MAX_TYPE_ED
135};
136
137#define TYPE_DD 0
138#define TYPE_HD 1
139#define TYPE_ED 2
140
141static int DriveType = TYPE_HD;
142
143static DEFINE_SPINLOCK(ataflop_lock);
144
145/* Array for translating minors into disk formats */
146static struct {
147 int index;
148 unsigned drive_types;
149} minor2disktype[] = {
150 { 0, TYPE_DD }, /* 1: d360 */
151 { 4, TYPE_HD }, /* 2: h1200 */
152 { 1, TYPE_DD }, /* 3: D360 */
153 { 2, TYPE_DD }, /* 4: D720 */
154 { 1, TYPE_DD }, /* 5: h360 = D360 */
155 { 2, TYPE_DD }, /* 6: h720 = D720 */
156 { 5, TYPE_HD }, /* 7: H1440 */
157 { 7, TYPE_ED }, /* 8: E2880 */
158/* some PC formats :-) */
159 { 8, TYPE_ED }, /* 9: E3280 <- was "CompaQ" == E2880 for PC */
160 { 5, TYPE_HD }, /* 10: h1440 = H1440 */
161 { 9, TYPE_HD }, /* 11: H1680 */
162 { 10, TYPE_DD }, /* 12: h410 */
163 { 3, TYPE_DD }, /* 13: H820 <- == D820, 82x10 */
164 { 11, TYPE_HD }, /* 14: h1476 */
165 { 12, TYPE_HD }, /* 15: H1722 */
166 { 13, TYPE_DD }, /* 16: h420 */
167 { 14, TYPE_DD }, /* 17: H830 */
168 { 15, TYPE_HD }, /* 18: h1494 */
169 { 16, TYPE_HD }, /* 19: H1743 */
170 { 17, TYPE_DD }, /* 20: h880 */
171 { 18, TYPE_DD }, /* 21: D1040 */
172 { 19, TYPE_DD }, /* 22: D1120 */
173 { 20, TYPE_HD }, /* 23: h1600 */
174 { 21, TYPE_HD }, /* 24: H1760 */
175 { 22, TYPE_HD }, /* 25: H1920 */
176 { 23, TYPE_ED }, /* 26: E3200 */
177 { 24, TYPE_ED }, /* 27: E3520 */
178 { 25, TYPE_ED }, /* 28: E3840 */
179 { 26, TYPE_HD }, /* 29: H1840 */
180 { 27, TYPE_DD }, /* 30: D800 */
181 { 6, TYPE_HD }, /* 31: H1640 <- was H1600 == h1600 for PC */
182};
183
184#define NUM_DISK_MINORS (sizeof(minor2disktype)/sizeof(*minor2disktype))
185
186/*
187 * Maximum disk size (in kilobytes). This default is used whenever the
188 * current disk size is unknown.
189 */
190#define MAX_DISK_SIZE 3280
191
192/*
193 * MSch: User-provided type information. 'drive' points to
194 * the respective entry of this array. Set by FDSETPRM ioctls.
195 */
196static struct atari_disk_type user_params[FD_MAX_UNITS];
197
198/*
199 * User-provided permanent type information. 'drive' points to
200 * the respective entry of this array. Set by FDDEFPRM ioctls,
201 * restored upon disk change by floppy_revalidate() if valid (as seen by
202 * default_params[].blocks > 0 - a bit in unit[].flags might be used for this?)
203 */
204static struct atari_disk_type default_params[FD_MAX_UNITS];
205
206/* current info on each unit */
207static struct atari_floppy_struct {
208 int connected; /* !=0 : drive is connected */
209 int autoprobe; /* !=0 : do autoprobe */
210
211 struct atari_disk_type *disktype; /* current type of disk */
212
213 int track; /* current head position or -1 if
214 unknown */
215 unsigned int steprate; /* steprate setting */
216 unsigned int wpstat; /* current state of WP signal (for
217 disk change detection) */
218 int flags; /* flags */
219 struct gendisk *disk;
220 int ref;
221 int type;
222} unit[FD_MAX_UNITS];
223
224#define UD unit[drive]
225#define UDT unit[drive].disktype
226#define SUD unit[SelectedDrive]
227#define SUDT unit[SelectedDrive].disktype
228
229
230#define FDC_READ(reg) ({ \
231 /* unsigned long __flags; */ \
232 unsigned short __val; \
233 /* local_irq_save(__flags); */ \
234 dma_wd.dma_mode_status = 0x80 | (reg); \
235 udelay(25); \
236 __val = dma_wd.fdc_acces_seccount; \
237 MFPDELAY(); \
238 /* local_irq_restore(__flags); */ \
239 __val & 0xff; \
240})
241
242#define FDC_WRITE(reg,val) \
243 do { \
244 /* unsigned long __flags; */ \
245 /* local_irq_save(__flags); */ \
246 dma_wd.dma_mode_status = 0x80 | (reg); \
247 udelay(25); \
248 dma_wd.fdc_acces_seccount = (val); \
249 MFPDELAY(); \
250 /* local_irq_restore(__flags); */ \
251 } while(0)
252
253
254/* Buffering variables:
255 * First, there is a DMA buffer in ST-RAM that is used for floppy DMA
256 * operations. Second, a track buffer is used to cache a whole track
257 * of the disk to save read operations. These are two separate buffers
258 * because that allows write operations without clearing the track buffer.
259 */
260
261static int MaxSectors[] = {
262 11, 22, 44
263};
264static int BufferSize[] = {
265 15*512, 30*512, 60*512
266};
267
268#define BUFFER_SIZE (BufferSize[DriveType])
269
270unsigned char *DMABuffer; /* buffer for writes */
271static unsigned long PhysDMABuffer; /* physical address */
272
273static int UseTrackbuffer = -1; /* Do track buffering? */
274MODULE_PARM(UseTrackbuffer, "i");
275
276unsigned char *TrackBuffer; /* buffer for reads */
277static unsigned long PhysTrackBuffer; /* physical address */
278static int BufferDrive, BufferSide, BufferTrack;
279static int read_track; /* non-zero if we are reading whole tracks */
280
281#define SECTOR_BUFFER(sec) (TrackBuffer + ((sec)-1)*512)
282#define IS_BUFFERED(drive,side,track) \
283 (BufferDrive == (drive) && BufferSide == (side) && BufferTrack == (track))
284
285/*
286 * These are global variables, as that's the easiest way to give
287 * information to interrupts. They are the data used for the current
288 * request.
289 */
290static int SelectedDrive = 0;
291static int ReqCmd, ReqBlock;
292static int ReqSide, ReqTrack, ReqSector, ReqCnt;
293static int HeadSettleFlag = 0;
294static unsigned char *ReqData, *ReqBuffer;
295static int MotorOn = 0, MotorOffTrys;
296static int IsFormatting = 0, FormatError;
297
298static int UserSteprate[FD_MAX_UNITS] = { -1, -1 };
299MODULE_PARM(UserSteprate, "1-" __MODULE_STRING(FD_MAX_UNITS) "i");
300
301/* Synchronization of FDC access. */
302static volatile int fdc_busy = 0;
303static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
304static DECLARE_WAIT_QUEUE_HEAD(format_wait);
305
306static unsigned long changed_floppies = 0xff, fake_change = 0;
307#define CHECK_CHANGE_DELAY HZ/2
308
309#define FD_MOTOR_OFF_DELAY (3*HZ)
310#define FD_MOTOR_OFF_MAXTRY (10*20)
311
312#define FLOPPY_TIMEOUT (6*HZ)
313#define RECALIBRATE_ERRORS 4 /* After this many errors the drive
314 * will be recalibrated. */
315#define MAX_ERRORS 8 /* After this many errors the driver
316 * will give up. */
317
318
319/*
320 * The driver is trying to determine the correct media format
321 * while Probing is set. fd_rwsec_done() clears it after a
322 * successful access.
323 */
324static int Probing = 0;
325
326/* This flag is set when a dummy seek is necessary to make the WP
327 * status bit accessible.
328 */
329static int NeedSeek = 0;
330
331
332#ifdef DEBUG
333#define DPRINT(a) printk a
334#else
335#define DPRINT(a)
336#endif
337
338/***************************** Prototypes *****************************/
339
340static void fd_select_side( int side );
341static void fd_select_drive( int drive );
342static void fd_deselect( void );
343static void fd_motor_off_timer( unsigned long dummy );
344static void check_change( unsigned long dummy );
345static irqreturn_t floppy_irq (int irq, void *dummy, struct pt_regs *fp);
346static void fd_error( void );
347static int do_format(int drive, int type, struct atari_format_descr *desc);
348static void do_fd_action( int drive );
349static void fd_calibrate( void );
350static void fd_calibrate_done( int status );
351static void fd_seek( void );
352static void fd_seek_done( int status );
353static void fd_rwsec( void );
354static void fd_readtrack_check( unsigned long dummy );
355static void fd_rwsec_done( int status );
356static void fd_rwsec_done1(int status);
357static void fd_writetrack( void );
358static void fd_writetrack_done( int status );
359static void fd_times_out( unsigned long dummy );
360static void finish_fdc( void );
361static void finish_fdc_done( int dummy );
362static void setup_req_params( int drive );
363static void redo_fd_request( void);
364static int fd_ioctl( struct inode *inode, struct file *filp, unsigned int
365 cmd, unsigned long param);
366static void fd_probe( int drive );
367static int fd_test_drive_present( int drive );
368static void config_types( void );
369static int floppy_open( struct inode *inode, struct file *filp );
370static int floppy_release( struct inode * inode, struct file * filp );
371
372/************************* End of Prototypes **************************/
373
Ingo Molnar8d06afa2005-09-09 13:10:40 -0700374static DEFINE_TIMER(motor_off_timer, fd_motor_off_timer, 0, 0);
375static DEFINE_TIMER(readtrack_timer, fd_readtrack_check, 0, 0);
376static DEFINE_TIMER(timeout_timer, fd_times_out, 0, 0);
377static DEFINE_TIMER(fd_timer, check_change, 0, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378
379static inline void start_motor_off_timer(void)
380{
381 mod_timer(&motor_off_timer, jiffies + FD_MOTOR_OFF_DELAY);
382 MotorOffTrys = 0;
383}
384
385static inline void start_check_change_timer( void )
386{
387 mod_timer(&fd_timer, jiffies + CHECK_CHANGE_DELAY);
388}
389
390static inline void start_timeout(void)
391{
392 mod_timer(&timeout_timer, jiffies + FLOPPY_TIMEOUT);
393}
394
395static inline void stop_timeout(void)
396{
397 del_timer(&timeout_timer);
398}
399
400/* Select the side to use. */
401
402static void fd_select_side( int side )
403{
404 unsigned long flags;
405
406 /* protect against various other ints mucking around with the PSG */
407 local_irq_save(flags);
408
409 sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
410 sound_ym.wd_data = (side == 0) ? sound_ym.rd_data_reg_sel | 0x01 :
411 sound_ym.rd_data_reg_sel & 0xfe;
412
413 local_irq_restore(flags);
414}
415
416
417/* Select a drive, update the FDC's track register and set the correct
418 * clock speed for this disk's type.
419 */
420
421static void fd_select_drive( int drive )
422{
423 unsigned long flags;
424 unsigned char tmp;
425
426 if (drive == SelectedDrive)
427 return;
428
429 /* protect against various other ints mucking around with the PSG */
430 local_irq_save(flags);
431 sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
432 tmp = sound_ym.rd_data_reg_sel;
433 sound_ym.wd_data = (tmp | DSKDRVNONE) & ~(drive == 0 ? DSKDRV0 : DSKDRV1);
434 atari_dont_touch_floppy_select = 1;
435 local_irq_restore(flags);
436
437 /* restore track register to saved value */
438 FDC_WRITE( FDCREG_TRACK, UD.track );
439 udelay(25);
440
441 /* select 8/16 MHz */
442 if (UDT)
443 if (ATARIHW_PRESENT(FDCSPEED))
444 dma_wd.fdc_speed = UDT->fdc_speed;
445
446 SelectedDrive = drive;
447}
448
449
450/* Deselect both drives. */
451
452static void fd_deselect( void )
453{
454 unsigned long flags;
455
456 /* protect against various other ints mucking around with the PSG */
457 local_irq_save(flags);
458 atari_dont_touch_floppy_select = 0;
459 sound_ym.rd_data_reg_sel=14; /* Select PSG Port A */
460 sound_ym.wd_data = (sound_ym.rd_data_reg_sel |
461 (MACH_IS_FALCON ? 3 : 7)); /* no drives selected */
462 /* On Falcon, the drive B select line is used on the printer port, so
463 * leave it alone... */
464 SelectedDrive = -1;
465 local_irq_restore(flags);
466}
467
468
469/* This timer function deselects the drives when the FDC switched the
470 * motor off. The deselection cannot happen earlier because the FDC
471 * counts the index signals, which arrive only if one drive is selected.
472 */
473
474static void fd_motor_off_timer( unsigned long dummy )
475{
476 unsigned char status;
477
478 if (SelectedDrive < 0)
479 /* no drive selected, needn't deselect anyone */
480 return;
481
482 if (stdma_islocked())
483 goto retry;
484
485 status = FDC_READ( FDCREG_STATUS );
486
487 if (!(status & 0x80)) {
488 /* motor already turned off by FDC -> deselect drives */
489 MotorOn = 0;
490 fd_deselect();
491 return;
492 }
493 /* not yet off, try again */
494
495 retry:
496 /* Test again later; if tested too often, it seems there is no disk
497 * in the drive and the FDC will leave the motor on forever (or,
498 * at least until a disk is inserted). So we'll test only twice
499 * per second from then on...
500 */
501 mod_timer(&motor_off_timer,
502 jiffies + (MotorOffTrys++ < FD_MOTOR_OFF_MAXTRY ? HZ/20 : HZ/2));
503}
504
505
506/* This function is repeatedly called to detect disk changes (as good
507 * as possible) and keep track of the current state of the write protection.
508 */
509
510static void check_change( unsigned long dummy )
511{
512 static int drive = 0;
513
514 unsigned long flags;
515 unsigned char old_porta;
516 int stat;
517
518 if (++drive > 1 || !UD.connected)
519 drive = 0;
520
521 /* protect against various other ints mucking around with the PSG */
522 local_irq_save(flags);
523
524 if (!stdma_islocked()) {
525 sound_ym.rd_data_reg_sel = 14;
526 old_porta = sound_ym.rd_data_reg_sel;
527 sound_ym.wd_data = (old_porta | DSKDRVNONE) &
528 ~(drive == 0 ? DSKDRV0 : DSKDRV1);
529 stat = !!(FDC_READ( FDCREG_STATUS ) & FDCSTAT_WPROT);
530 sound_ym.wd_data = old_porta;
531
532 if (stat != UD.wpstat) {
533 DPRINT(( "wpstat[%d] = %d\n", drive, stat ));
534 UD.wpstat = stat;
535 set_bit (drive, &changed_floppies);
536 }
537 }
538 local_irq_restore(flags);
539
540 start_check_change_timer();
541}
542
543
544/* Handling of the Head Settling Flag: This flag should be set after each
545 * seek operation, because we don't use seeks with verify.
546 */
547
548static inline void set_head_settle_flag(void)
549{
550 HeadSettleFlag = FDCCMDADD_E;
551}
552
553static inline int get_head_settle_flag(void)
554{
555 int tmp = HeadSettleFlag;
556 HeadSettleFlag = 0;
557 return( tmp );
558}
559
560static inline void copy_buffer(void *from, void *to)
561{
562 ulong *p1 = (ulong *)from, *p2 = (ulong *)to;
563 int cnt;
564
565 for (cnt = 512/4; cnt; cnt--)
566 *p2++ = *p1++;
567}
568
569
570
571
572/* General Interrupt Handling */
573
574static void (*FloppyIRQHandler)( int status ) = NULL;
575
576static irqreturn_t floppy_irq (int irq, void *dummy, struct pt_regs *fp)
577{
578 unsigned char status;
579 void (*handler)( int );
580
581 handler = xchg(&FloppyIRQHandler, NULL);
582
583 if (handler) {
584 nop();
585 status = FDC_READ( FDCREG_STATUS );
586 DPRINT(("FDC irq, status = %02x handler = %08lx\n",status,(unsigned long)handler));
587 handler( status );
588 }
589 else {
590 DPRINT(("FDC irq, no handler\n"));
591 }
592 return IRQ_HANDLED;
593}
594
595
596/* Error handling: If some error happened, retry some times, then
597 * recalibrate, then try again, and fail after MAX_ERRORS.
598 */
599
600static void fd_error( void )
601{
602 if (IsFormatting) {
603 IsFormatting = 0;
604 FormatError = 1;
605 wake_up( &format_wait );
606 return;
607 }
608
609 if (!CURRENT)
610 return;
611
612 CURRENT->errors++;
613 if (CURRENT->errors >= MAX_ERRORS) {
614 printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive );
615 end_request(CURRENT, 0);
616 }
617 else if (CURRENT->errors == RECALIBRATE_ERRORS) {
618 printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive );
619 if (SelectedDrive != -1)
620 SUD.track = -1;
621 }
622 redo_fd_request();
623}
624
625
626
627#define SET_IRQ_HANDLER(proc) do { FloppyIRQHandler = (proc); } while(0)
628
629
630/* ---------- Formatting ---------- */
631
632#define FILL(n,val) \
633 do { \
634 memset( p, val, n ); \
635 p += n; \
636 } while(0)
637
638static int do_format(int drive, int type, struct atari_format_descr *desc)
639{
640 unsigned char *p;
641 int sect, nsect;
642 unsigned long flags;
643
644 DPRINT(("do_format( dr=%d tr=%d he=%d offs=%d )\n",
645 drive, desc->track, desc->head, desc->sect_offset ));
646
647 local_irq_save(flags);
648 while( fdc_busy ) sleep_on( &fdc_wait );
649 fdc_busy = 1;
650 stdma_lock(floppy_irq, NULL);
651 atari_turnon_irq( IRQ_MFP_FDC ); /* should be already, just to be sure */
652 local_irq_restore(flags);
653
654 if (type) {
655 if (--type >= NUM_DISK_MINORS ||
656 minor2disktype[type].drive_types > DriveType) {
657 redo_fd_request();
658 return -EINVAL;
659 }
660 type = minor2disktype[type].index;
661 UDT = &disk_type[type];
662 }
663
664 if (!UDT || desc->track >= UDT->blocks/UDT->spt/2 || desc->head >= 2) {
665 redo_fd_request();
666 return -EINVAL;
667 }
668
669 nsect = UDT->spt;
670 p = TrackBuffer;
671 /* The track buffer is used for the raw track data, so its
672 contents become invalid! */
673 BufferDrive = -1;
674 /* stop deselect timer */
675 del_timer( &motor_off_timer );
676
677 FILL( 60 * (nsect / 9), 0x4e );
678 for( sect = 0; sect < nsect; ++sect ) {
679 FILL( 12, 0 );
680 FILL( 3, 0xf5 );
681 *p++ = 0xfe;
682 *p++ = desc->track;
683 *p++ = desc->head;
684 *p++ = (nsect + sect - desc->sect_offset) % nsect + 1;
685 *p++ = 2;
686 *p++ = 0xf7;
687 FILL( 22, 0x4e );
688 FILL( 12, 0 );
689 FILL( 3, 0xf5 );
690 *p++ = 0xfb;
691 FILL( 512, 0xe5 );
692 *p++ = 0xf7;
693 FILL( 40, 0x4e );
694 }
695 FILL( TrackBuffer+BUFFER_SIZE-p, 0x4e );
696
697 IsFormatting = 1;
698 FormatError = 0;
699 ReqTrack = desc->track;
700 ReqSide = desc->head;
701 do_fd_action( drive );
702
703 sleep_on( &format_wait );
704
705 redo_fd_request();
706 return( FormatError ? -EIO : 0 );
707}
708
709
710/* do_fd_action() is the general procedure for a fd request: All
711 * required parameter settings (drive select, side select, track
712 * position) are checked and set if needed. For each of these
713 * parameters and the actual reading or writing exist two functions:
714 * one that starts the setting (or skips it if possible) and one
715 * callback for the "done" interrupt. Each done func calls the next
716 * set function to propagate the request down to fd_rwsec_done().
717 */
718
719static void do_fd_action( int drive )
720{
721 DPRINT(("do_fd_action\n"));
722
723 if (UseTrackbuffer && !IsFormatting) {
724 repeat:
725 if (IS_BUFFERED( drive, ReqSide, ReqTrack )) {
726 if (ReqCmd == READ) {
727 copy_buffer( SECTOR_BUFFER(ReqSector), ReqData );
728 if (++ReqCnt < CURRENT->current_nr_sectors) {
729 /* read next sector */
730 setup_req_params( drive );
731 goto repeat;
732 }
733 else {
734 /* all sectors finished */
735 CURRENT->nr_sectors -= CURRENT->current_nr_sectors;
736 CURRENT->sector += CURRENT->current_nr_sectors;
737 end_request(CURRENT, 1);
738 redo_fd_request();
739 return;
740 }
741 }
742 else {
743 /* cmd == WRITE, pay attention to track buffer
744 * consistency! */
745 copy_buffer( ReqData, SECTOR_BUFFER(ReqSector) );
746 }
747 }
748 }
749
750 if (SelectedDrive != drive)
751 fd_select_drive( drive );
752
753 if (UD.track == -1)
754 fd_calibrate();
755 else if (UD.track != ReqTrack << UDT->stretch)
756 fd_seek();
757 else if (IsFormatting)
758 fd_writetrack();
759 else
760 fd_rwsec();
761}
762
763
764/* Seek to track 0 if the current track is unknown */
765
766static void fd_calibrate( void )
767{
768 if (SUD.track >= 0) {
769 fd_calibrate_done( 0 );
770 return;
771 }
772
773 if (ATARIHW_PRESENT(FDCSPEED))
774 dma_wd.fdc_speed = 0; /* always seek with 8 Mhz */;
775 DPRINT(("fd_calibrate\n"));
776 SET_IRQ_HANDLER( fd_calibrate_done );
777 /* we can't verify, since the speed may be incorrect */
778 FDC_WRITE( FDCREG_CMD, FDCCMD_RESTORE | SUD.steprate );
779
780 NeedSeek = 1;
781 MotorOn = 1;
782 start_timeout();
783 /* wait for IRQ */
784}
785
786
787static void fd_calibrate_done( int status )
788{
789 DPRINT(("fd_calibrate_done()\n"));
790 stop_timeout();
791
792 /* set the correct speed now */
793 if (ATARIHW_PRESENT(FDCSPEED))
794 dma_wd.fdc_speed = SUDT->fdc_speed;
795 if (status & FDCSTAT_RECNF) {
796 printk(KERN_ERR "fd%d: restore failed\n", SelectedDrive );
797 fd_error();
798 }
799 else {
800 SUD.track = 0;
801 fd_seek();
802 }
803}
804
805
806/* Seek the drive to the requested track. The drive must have been
807 * calibrated at some point before this.
808 */
809
810static void fd_seek( void )
811{
812 if (SUD.track == ReqTrack << SUDT->stretch) {
813 fd_seek_done( 0 );
814 return;
815 }
816
817 if (ATARIHW_PRESENT(FDCSPEED)) {
818 dma_wd.fdc_speed = 0; /* always seek witch 8 Mhz */
819 MFPDELAY();
820 }
821
822 DPRINT(("fd_seek() to track %d\n",ReqTrack));
823 FDC_WRITE( FDCREG_DATA, ReqTrack << SUDT->stretch);
824 udelay(25);
825 SET_IRQ_HANDLER( fd_seek_done );
826 FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK | SUD.steprate );
827
828 MotorOn = 1;
829 set_head_settle_flag();
830 start_timeout();
831 /* wait for IRQ */
832}
833
834
835static void fd_seek_done( int status )
836{
837 DPRINT(("fd_seek_done()\n"));
838 stop_timeout();
839
840 /* set the correct speed */
841 if (ATARIHW_PRESENT(FDCSPEED))
842 dma_wd.fdc_speed = SUDT->fdc_speed;
843 if (status & FDCSTAT_RECNF) {
844 printk(KERN_ERR "fd%d: seek error (to track %d)\n",
845 SelectedDrive, ReqTrack );
846 /* we don't know exactly which track we are on now! */
847 SUD.track = -1;
848 fd_error();
849 }
850 else {
851 SUD.track = ReqTrack << SUDT->stretch;
852 NeedSeek = 0;
853 if (IsFormatting)
854 fd_writetrack();
855 else
856 fd_rwsec();
857 }
858}
859
860
861/* This does the actual reading/writing after positioning the head
862 * over the correct track.
863 */
864
865static int MultReadInProgress = 0;
866
867
868static void fd_rwsec( void )
869{
870 unsigned long paddr, flags;
871 unsigned int rwflag, old_motoron;
872 unsigned int track;
873
874 DPRINT(("fd_rwsec(), Sec=%d, Access=%c\n",ReqSector, ReqCmd == WRITE ? 'w' : 'r' ));
875 if (ReqCmd == WRITE) {
876 if (ATARIHW_PRESENT(EXTD_DMA)) {
877 paddr = virt_to_phys(ReqData);
878 }
879 else {
880 copy_buffer( ReqData, DMABuffer );
881 paddr = PhysDMABuffer;
882 }
883 dma_cache_maintenance( paddr, 512, 1 );
884 rwflag = 0x100;
885 }
886 else {
887 if (read_track)
888 paddr = PhysTrackBuffer;
889 else
890 paddr = ATARIHW_PRESENT(EXTD_DMA) ?
891 virt_to_phys(ReqData) : PhysDMABuffer;
892 rwflag = 0;
893 }
894
895 fd_select_side( ReqSide );
896
897 /* Start sector of this operation */
898 FDC_WRITE( FDCREG_SECTOR, read_track ? 1 : ReqSector );
899 MFPDELAY();
900 /* Cheat for track if stretch != 0 */
901 if (SUDT->stretch) {
902 track = FDC_READ( FDCREG_TRACK);
903 MFPDELAY();
904 FDC_WRITE( FDCREG_TRACK, track >> SUDT->stretch);
905 }
906 udelay(25);
907
908 /* Setup DMA */
909 local_irq_save(flags);
910 dma_wd.dma_lo = (unsigned char)paddr;
911 MFPDELAY();
912 paddr >>= 8;
913 dma_wd.dma_md = (unsigned char)paddr;
914 MFPDELAY();
915 paddr >>= 8;
916 if (ATARIHW_PRESENT(EXTD_DMA))
917 st_dma_ext_dmahi = (unsigned short)paddr;
918 else
919 dma_wd.dma_hi = (unsigned char)paddr;
920 MFPDELAY();
921 local_irq_restore(flags);
922
923 /* Clear FIFO and switch DMA to correct mode */
924 dma_wd.dma_mode_status = 0x90 | rwflag;
925 MFPDELAY();
926 dma_wd.dma_mode_status = 0x90 | (rwflag ^ 0x100);
927 MFPDELAY();
928 dma_wd.dma_mode_status = 0x90 | rwflag;
929 MFPDELAY();
930
931 /* How many sectors for DMA */
932 dma_wd.fdc_acces_seccount = read_track ? SUDT->spt : 1;
933
934 udelay(25);
935
936 /* Start operation */
937 dma_wd.dma_mode_status = FDCSELREG_STP | rwflag;
938 udelay(25);
939 SET_IRQ_HANDLER( fd_rwsec_done );
940 dma_wd.fdc_acces_seccount =
941 (get_head_settle_flag() |
942 (rwflag ? FDCCMD_WRSEC : (FDCCMD_RDSEC | (read_track ? FDCCMDADD_M : 0))));
943
944 old_motoron = MotorOn;
945 MotorOn = 1;
946 NeedSeek = 1;
947 /* wait for interrupt */
948
949 if (read_track) {
950 /* If reading a whole track, wait about one disk rotation and
951 * then check if all sectors are read. The FDC will even
952 * search for the first non-existent sector and need 1 sec to
953 * recognise that it isn't present :-(
954 */
955 MultReadInProgress = 1;
956 mod_timer(&readtrack_timer,
957 /* 1 rot. + 5 rot.s if motor was off */
958 jiffies + HZ/5 + (old_motoron ? 0 : HZ));
959 }
960 start_timeout();
961}
962
963
964static void fd_readtrack_check( unsigned long dummy )
965{
966 unsigned long flags, addr, addr2;
967
968 local_irq_save(flags);
969
970 if (!MultReadInProgress) {
971 /* This prevents a race condition that could arise if the
972 * interrupt is triggered while the calling of this timer
973 * callback function takes place. The IRQ function then has
974 * already cleared 'MultReadInProgress' when flow of control
975 * gets here.
976 */
977 local_irq_restore(flags);
978 return;
979 }
980
981 /* get the current DMA address */
982 /* ++ f.a. read twice to avoid being fooled by switcher */
983 addr = 0;
984 do {
985 addr2 = addr;
986 addr = dma_wd.dma_lo & 0xff;
987 MFPDELAY();
988 addr |= (dma_wd.dma_md & 0xff) << 8;
989 MFPDELAY();
990 if (ATARIHW_PRESENT( EXTD_DMA ))
991 addr |= (st_dma_ext_dmahi & 0xffff) << 16;
992 else
993 addr |= (dma_wd.dma_hi & 0xff) << 16;
994 MFPDELAY();
995 } while(addr != addr2);
996
997 if (addr >= PhysTrackBuffer + SUDT->spt*512) {
998 /* already read enough data, force an FDC interrupt to stop
999 * the read operation
1000 */
1001 SET_IRQ_HANDLER( NULL );
1002 MultReadInProgress = 0;
1003 local_irq_restore(flags);
1004 DPRINT(("fd_readtrack_check(): done\n"));
1005 FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI );
1006 udelay(25);
1007
1008 /* No error until now -- the FDC would have interrupted
1009 * otherwise!
1010 */
1011 fd_rwsec_done1(0);
1012 }
1013 else {
1014 /* not yet finished, wait another tenth rotation */
1015 local_irq_restore(flags);
1016 DPRINT(("fd_readtrack_check(): not yet finished\n"));
1017 mod_timer(&readtrack_timer, jiffies + HZ/5/10);
1018 }
1019}
1020
1021
1022static void fd_rwsec_done( int status )
1023{
1024 DPRINT(("fd_rwsec_done()\n"));
1025
1026 if (read_track) {
1027 del_timer(&readtrack_timer);
1028 if (!MultReadInProgress)
1029 return;
1030 MultReadInProgress = 0;
1031 }
1032 fd_rwsec_done1(status);
1033}
1034
1035static void fd_rwsec_done1(int status)
1036{
1037 unsigned int track;
1038
1039 stop_timeout();
1040
1041 /* Correct the track if stretch != 0 */
1042 if (SUDT->stretch) {
1043 track = FDC_READ( FDCREG_TRACK);
1044 MFPDELAY();
1045 FDC_WRITE( FDCREG_TRACK, track << SUDT->stretch);
1046 }
1047
1048 if (!UseTrackbuffer) {
1049 dma_wd.dma_mode_status = 0x90;
1050 MFPDELAY();
1051 if (!(dma_wd.dma_mode_status & 0x01)) {
1052 printk(KERN_ERR "fd%d: DMA error\n", SelectedDrive );
1053 goto err_end;
1054 }
1055 }
1056 MFPDELAY();
1057
1058 if (ReqCmd == WRITE && (status & FDCSTAT_WPROT)) {
1059 printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive );
1060 goto err_end;
1061 }
1062 if ((status & FDCSTAT_RECNF) &&
1063 /* RECNF is no error after a multiple read when the FDC
1064 searched for a non-existent sector! */
1065 !(read_track && FDC_READ(FDCREG_SECTOR) > SUDT->spt)) {
1066 if (Probing) {
1067 if (SUDT > disk_type) {
1068 if (SUDT[-1].blocks > ReqBlock) {
1069 /* try another disk type */
1070 SUDT--;
1071 set_capacity(unit[SelectedDrive].disk,
1072 SUDT->blocks);
1073 } else
1074 Probing = 0;
1075 }
1076 else {
1077 if (SUD.flags & FTD_MSG)
1078 printk(KERN_INFO "fd%d: Auto-detected floppy type %s\n",
1079 SelectedDrive, SUDT->name );
1080 Probing=0;
1081 }
1082 } else {
1083/* record not found, but not probing. Maybe stretch wrong ? Restart probing */
1084 if (SUD.autoprobe) {
1085 SUDT = disk_type + StartDiskType[DriveType];
1086 set_capacity(unit[SelectedDrive].disk,
1087 SUDT->blocks);
1088 Probing = 1;
1089 }
1090 }
1091 if (Probing) {
1092 if (ATARIHW_PRESENT(FDCSPEED)) {
1093 dma_wd.fdc_speed = SUDT->fdc_speed;
1094 MFPDELAY();
1095 }
1096 setup_req_params( SelectedDrive );
1097 BufferDrive = -1;
1098 do_fd_action( SelectedDrive );
1099 return;
1100 }
1101
1102 printk(KERN_ERR "fd%d: sector %d not found (side %d, track %d)\n",
1103 SelectedDrive, FDC_READ (FDCREG_SECTOR), ReqSide, ReqTrack );
1104 goto err_end;
1105 }
1106 if (status & FDCSTAT_CRC) {
1107 printk(KERN_ERR "fd%d: CRC error (side %d, track %d, sector %d)\n",
1108 SelectedDrive, ReqSide, ReqTrack, FDC_READ (FDCREG_SECTOR) );
1109 goto err_end;
1110 }
1111 if (status & FDCSTAT_LOST) {
1112 printk(KERN_ERR "fd%d: lost data (side %d, track %d, sector %d)\n",
1113 SelectedDrive, ReqSide, ReqTrack, FDC_READ (FDCREG_SECTOR) );
1114 goto err_end;
1115 }
1116
1117 Probing = 0;
1118
1119 if (ReqCmd == READ) {
1120 if (!read_track) {
1121 void *addr;
1122 addr = ATARIHW_PRESENT( EXTD_DMA ) ? ReqData : DMABuffer;
1123 dma_cache_maintenance( virt_to_phys(addr), 512, 0 );
1124 if (!ATARIHW_PRESENT( EXTD_DMA ))
1125 copy_buffer (addr, ReqData);
1126 } else {
1127 dma_cache_maintenance( PhysTrackBuffer, MaxSectors[DriveType] * 512, 0 );
1128 BufferDrive = SelectedDrive;
1129 BufferSide = ReqSide;
1130 BufferTrack = ReqTrack;
1131 copy_buffer (SECTOR_BUFFER (ReqSector), ReqData);
1132 }
1133 }
1134
1135 if (++ReqCnt < CURRENT->current_nr_sectors) {
1136 /* read next sector */
1137 setup_req_params( SelectedDrive );
1138 do_fd_action( SelectedDrive );
1139 }
1140 else {
1141 /* all sectors finished */
1142 CURRENT->nr_sectors -= CURRENT->current_nr_sectors;
1143 CURRENT->sector += CURRENT->current_nr_sectors;
1144 end_request(CURRENT, 1);
1145 redo_fd_request();
1146 }
1147 return;
1148
1149 err_end:
1150 BufferDrive = -1;
1151 fd_error();
1152}
1153
1154
1155static void fd_writetrack( void )
1156{
1157 unsigned long paddr, flags;
1158 unsigned int track;
1159
1160 DPRINT(("fd_writetrack() Tr=%d Si=%d\n", ReqTrack, ReqSide ));
1161
1162 paddr = PhysTrackBuffer;
1163 dma_cache_maintenance( paddr, BUFFER_SIZE, 1 );
1164
1165 fd_select_side( ReqSide );
1166
1167 /* Cheat for track if stretch != 0 */
1168 if (SUDT->stretch) {
1169 track = FDC_READ( FDCREG_TRACK);
1170 MFPDELAY();
1171 FDC_WRITE(FDCREG_TRACK,track >> SUDT->stretch);
1172 }
1173 udelay(40);
1174
1175 /* Setup DMA */
1176 local_irq_save(flags);
1177 dma_wd.dma_lo = (unsigned char)paddr;
1178 MFPDELAY();
1179 paddr >>= 8;
1180 dma_wd.dma_md = (unsigned char)paddr;
1181 MFPDELAY();
1182 paddr >>= 8;
1183 if (ATARIHW_PRESENT( EXTD_DMA ))
1184 st_dma_ext_dmahi = (unsigned short)paddr;
1185 else
1186 dma_wd.dma_hi = (unsigned char)paddr;
1187 MFPDELAY();
1188 local_irq_restore(flags);
1189
1190 /* Clear FIFO and switch DMA to correct mode */
1191 dma_wd.dma_mode_status = 0x190;
1192 MFPDELAY();
1193 dma_wd.dma_mode_status = 0x90;
1194 MFPDELAY();
1195 dma_wd.dma_mode_status = 0x190;
1196 MFPDELAY();
1197
1198 /* How many sectors for DMA */
1199 dma_wd.fdc_acces_seccount = BUFFER_SIZE/512;
1200 udelay(40);
1201
1202 /* Start operation */
1203 dma_wd.dma_mode_status = FDCSELREG_STP | 0x100;
1204 udelay(40);
1205 SET_IRQ_HANDLER( fd_writetrack_done );
1206 dma_wd.fdc_acces_seccount = FDCCMD_WRTRA | get_head_settle_flag();
1207
1208 MotorOn = 1;
1209 start_timeout();
1210 /* wait for interrupt */
1211}
1212
1213
1214static void fd_writetrack_done( int status )
1215{
1216 DPRINT(("fd_writetrack_done()\n"));
1217
1218 stop_timeout();
1219
1220 if (status & FDCSTAT_WPROT) {
1221 printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive );
1222 goto err_end;
1223 }
1224 if (status & FDCSTAT_LOST) {
1225 printk(KERN_ERR "fd%d: lost data (side %d, track %d)\n",
1226 SelectedDrive, ReqSide, ReqTrack );
1227 goto err_end;
1228 }
1229
1230 wake_up( &format_wait );
1231 return;
1232
1233 err_end:
1234 fd_error();
1235}
1236
1237static void fd_times_out( unsigned long dummy )
1238{
1239 atari_disable_irq( IRQ_MFP_FDC );
1240 if (!FloppyIRQHandler) goto end; /* int occurred after timer was fired, but
1241 * before we came here... */
1242
1243 SET_IRQ_HANDLER( NULL );
1244 /* If the timeout occurred while the readtrack_check timer was
1245 * active, we need to cancel it, else bad things will happen */
1246 if (UseTrackbuffer)
1247 del_timer( &readtrack_timer );
1248 FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI );
1249 udelay( 25 );
1250
1251 printk(KERN_ERR "floppy timeout\n" );
1252 fd_error();
1253 end:
1254 atari_enable_irq( IRQ_MFP_FDC );
1255}
1256
1257
1258/* The (noop) seek operation here is needed to make the WP bit in the
1259 * FDC status register accessible for check_change. If the last disk
1260 * operation would have been a RDSEC, this bit would always read as 0
1261 * no matter what :-( To save time, the seek goes to the track we're
1262 * already on.
1263 */
1264
1265static void finish_fdc( void )
1266{
1267 if (!NeedSeek) {
1268 finish_fdc_done( 0 );
1269 }
1270 else {
1271 DPRINT(("finish_fdc: dummy seek started\n"));
1272 FDC_WRITE (FDCREG_DATA, SUD.track);
1273 SET_IRQ_HANDLER( finish_fdc_done );
1274 FDC_WRITE (FDCREG_CMD, FDCCMD_SEEK);
1275 MotorOn = 1;
1276 start_timeout();
1277 /* we must wait for the IRQ here, because the ST-DMA
1278 is released immediately afterwards and the interrupt
1279 may be delivered to the wrong driver. */
1280 }
1281}
1282
1283
1284static void finish_fdc_done( int dummy )
1285{
1286 unsigned long flags;
1287
1288 DPRINT(("finish_fdc_done entered\n"));
1289 stop_timeout();
1290 NeedSeek = 0;
1291
1292 if (timer_pending(&fd_timer) && time_before(fd_timer.expires, jiffies + 5))
1293 /* If the check for a disk change is done too early after this
1294 * last seek command, the WP bit still reads wrong :-((
1295 */
1296 mod_timer(&fd_timer, jiffies + 5);
1297 else
1298 start_check_change_timer();
1299 start_motor_off_timer();
1300
1301 local_irq_save(flags);
1302 stdma_release();
1303 fdc_busy = 0;
1304 wake_up( &fdc_wait );
1305 local_irq_restore(flags);
1306
1307 DPRINT(("finish_fdc() finished\n"));
1308}
1309
1310/* The detection of disk changes is a dark chapter in Atari history :-(
1311 * Because the "Drive ready" signal isn't present in the Atari
1312 * hardware, one has to rely on the "Write Protect". This works fine,
1313 * as long as no write protected disks are used. TOS solves this
1314 * problem by introducing tri-state logic ("maybe changed") and
1315 * looking at the serial number in block 0. This isn't possible for
1316 * Linux, since the floppy driver can't make assumptions about the
1317 * filesystem used on the disk and thus the contents of block 0. I've
1318 * chosen the method to always say "The disk was changed" if it is
1319 * unsure whether it was. This implies that every open or mount
1320 * invalidates the disk buffers if you work with write protected
1321 * disks. But at least this is better than working with incorrect data
1322 * due to unrecognised disk changes.
1323 */
1324
1325static int check_floppy_change(struct gendisk *disk)
1326{
1327 struct atari_floppy_struct *p = disk->private_data;
1328 unsigned int drive = p - unit;
1329 if (test_bit (drive, &fake_change)) {
1330 /* simulated change (e.g. after formatting) */
1331 return 1;
1332 }
1333 if (test_bit (drive, &changed_floppies)) {
1334 /* surely changed (the WP signal changed at least once) */
1335 return 1;
1336 }
1337 if (UD.wpstat) {
1338 /* WP is on -> could be changed: to be sure, buffers should be
1339 * invalidated...
1340 */
1341 return 1;
1342 }
1343
1344 return 0;
1345}
1346
1347static int floppy_revalidate(struct gendisk *disk)
1348{
1349 struct atari_floppy_struct *p = disk->private_data;
1350 unsigned int drive = p - unit;
1351
1352 if (test_bit(drive, &changed_floppies) ||
1353 test_bit(drive, &fake_change) ||
1354 p->disktype == 0) {
1355 if (UD.flags & FTD_MSG)
1356 printk(KERN_ERR "floppy: clear format %p!\n", UDT);
1357 BufferDrive = -1;
1358 clear_bit(drive, &fake_change);
1359 clear_bit(drive, &changed_floppies);
1360 /* MSch: clearing geometry makes sense only for autoprobe
1361 formats, for 'permanent user-defined' parameter:
1362 restore default_params[] here if flagged valid! */
1363 if (default_params[drive].blocks == 0)
1364 UDT = 0;
1365 else
1366 UDT = &default_params[drive];
1367 }
1368 return 0;
1369}
1370
1371
1372/* This sets up the global variables describing the current request. */
1373
1374static void setup_req_params( int drive )
1375{
1376 int block = ReqBlock + ReqCnt;
1377
1378 ReqTrack = block / UDT->spt;
1379 ReqSector = block - ReqTrack * UDT->spt + 1;
1380 ReqSide = ReqTrack & 1;
1381 ReqTrack >>= 1;
1382 ReqData = ReqBuffer + 512 * ReqCnt;
1383
1384 if (UseTrackbuffer)
1385 read_track = (ReqCmd == READ && CURRENT->errors == 0);
1386 else
1387 read_track = 0;
1388
1389 DPRINT(("Request params: Si=%d Tr=%d Se=%d Data=%08lx\n",ReqSide,
1390 ReqTrack, ReqSector, (unsigned long)ReqData ));
1391}
1392
1393
1394static void redo_fd_request(void)
1395{
1396 int drive, type;
1397 struct atari_floppy_struct *floppy;
1398
1399 DPRINT(("redo_fd_request: CURRENT=%p dev=%s CURRENT->sector=%ld\n",
1400 CURRENT, CURRENT ? CURRENT->rq_disk->disk_name : "",
1401 CURRENT ? CURRENT->sector : 0 ));
1402
1403 IsFormatting = 0;
1404
1405repeat:
1406
1407 if (!CURRENT)
1408 goto the_end;
1409
1410 floppy = CURRENT->rq_disk->private_data;
1411 drive = floppy - unit;
1412 type = floppy->type;
1413
1414 if (!UD.connected) {
1415 /* drive not connected */
1416 printk(KERN_ERR "Unknown Device: fd%d\n", drive );
1417 end_request(CURRENT, 0);
1418 goto repeat;
1419 }
1420
1421 if (type == 0) {
1422 if (!UDT) {
1423 Probing = 1;
1424 UDT = disk_type + StartDiskType[DriveType];
1425 set_capacity(floppy->disk, UDT->blocks);
1426 UD.autoprobe = 1;
1427 }
1428 }
1429 else {
1430 /* user supplied disk type */
1431 if (--type >= NUM_DISK_MINORS) {
1432 printk(KERN_WARNING "fd%d: invalid disk format", drive );
1433 end_request(CURRENT, 0);
1434 goto repeat;
1435 }
1436 if (minor2disktype[type].drive_types > DriveType) {
1437 printk(KERN_WARNING "fd%d: unsupported disk format", drive );
1438 end_request(CURRENT, 0);
1439 goto repeat;
1440 }
1441 type = minor2disktype[type].index;
1442 UDT = &disk_type[type];
1443 set_capacity(floppy->disk, UDT->blocks);
1444 UD.autoprobe = 0;
1445 }
1446
1447 if (CURRENT->sector + 1 > UDT->blocks) {
1448 end_request(CURRENT, 0);
1449 goto repeat;
1450 }
1451
1452 /* stop deselect timer */
1453 del_timer( &motor_off_timer );
1454
1455 ReqCnt = 0;
1456 ReqCmd = rq_data_dir(CURRENT);
1457 ReqBlock = CURRENT->sector;
1458 ReqBuffer = CURRENT->buffer;
1459 setup_req_params( drive );
1460 do_fd_action( drive );
1461
1462 return;
1463
1464 the_end:
1465 finish_fdc();
1466}
1467
1468
1469void do_fd_request(request_queue_t * q)
1470{
1471 unsigned long flags;
1472
1473 DPRINT(("do_fd_request for pid %d\n",current->pid));
1474 while( fdc_busy ) sleep_on( &fdc_wait );
1475 fdc_busy = 1;
1476 stdma_lock(floppy_irq, NULL);
1477
1478 atari_disable_irq( IRQ_MFP_FDC );
1479 local_save_flags(flags); /* The request function is called with ints
1480 local_irq_disable(); * disabled... so must save the IPL for later */
1481 redo_fd_request();
1482 local_irq_restore(flags);
1483 atari_enable_irq( IRQ_MFP_FDC );
1484}
1485
1486static int fd_ioctl(struct inode *inode, struct file *filp,
1487 unsigned int cmd, unsigned long param)
1488{
1489 struct gendisk *disk = inode->i_bdev->bd_disk;
1490 struct atari_floppy_struct *floppy = disk->private_data;
1491 int drive = floppy - unit;
1492 int type = floppy->type;
1493 struct atari_format_descr fmt_desc;
1494 struct atari_disk_type *dtp;
1495 struct floppy_struct getprm;
1496 int settype;
1497 struct floppy_struct setprm;
1498
1499 switch (cmd) {
1500 case FDGETPRM:
1501 if (type) {
1502 if (--type >= NUM_DISK_MINORS)
1503 return -ENODEV;
1504 if (minor2disktype[type].drive_types > DriveType)
1505 return -ENODEV;
1506 type = minor2disktype[type].index;
1507 dtp = &disk_type[type];
1508 if (UD.flags & FTD_MSG)
1509 printk (KERN_ERR "floppy%d: found dtp %p name %s!\n",
1510 drive, dtp, dtp->name);
1511 }
1512 else {
1513 if (!UDT)
1514 return -ENXIO;
1515 else
1516 dtp = UDT;
1517 }
1518 memset((void *)&getprm, 0, sizeof(getprm));
1519 getprm.size = dtp->blocks;
1520 getprm.sect = dtp->spt;
1521 getprm.head = 2;
1522 getprm.track = dtp->blocks/dtp->spt/2;
1523 getprm.stretch = dtp->stretch;
1524 if (copy_to_user((void *)param, &getprm, sizeof(getprm)))
1525 return -EFAULT;
1526 return 0;
1527 }
1528 switch (cmd) {
1529 case FDSETPRM:
1530 case FDDEFPRM:
1531 /*
1532 * MSch 7/96: simple 'set geometry' case: just set the
1533 * 'default' device params (minor == 0).
1534 * Currently, the drive geometry is cleared after each
1535 * disk change and subsequent revalidate()! simple
1536 * implementation of FDDEFPRM: save geometry from a
1537 * FDDEFPRM call and restore it in floppy_revalidate() !
1538 */
1539
1540 /* get the parameters from user space */
1541 if (floppy->ref != 1 && floppy->ref != -1)
1542 return -EBUSY;
1543 if (copy_from_user(&setprm, (void *) param, sizeof(setprm)))
1544 return -EFAULT;
1545 /*
1546 * first of all: check for floppy change and revalidate,
1547 * or the next access will revalidate - and clear UDT :-(
1548 */
1549
1550 if (check_floppy_change(disk))
1551 floppy_revalidate(disk);
1552
1553 if (UD.flags & FTD_MSG)
1554 printk (KERN_INFO "floppy%d: setting size %d spt %d str %d!\n",
1555 drive, setprm.size, setprm.sect, setprm.stretch);
1556
1557 /* what if type > 0 here? Overwrite specified entry ? */
1558 if (type) {
1559 /* refuse to re-set a predefined type for now */
1560 redo_fd_request();
1561 return -EINVAL;
1562 }
1563
1564 /*
1565 * type == 0: first look for a matching entry in the type list,
1566 * and set the UD.disktype field to use the perdefined entry.
1567 * TODO: add user-defined format to head of autoprobe list ?
1568 * Useful to include the user-type for future autodetection!
1569 */
1570
1571 for (settype = 0; settype < NUM_DISK_MINORS; settype++) {
1572 int setidx = 0;
1573 if (minor2disktype[settype].drive_types > DriveType) {
1574 /* skip this one, invalid for drive ... */
1575 continue;
1576 }
1577 setidx = minor2disktype[settype].index;
1578 dtp = &disk_type[setidx];
1579
1580 /* found matching entry ?? */
1581 if ( dtp->blocks == setprm.size
1582 && dtp->spt == setprm.sect
1583 && dtp->stretch == setprm.stretch ) {
1584 if (UD.flags & FTD_MSG)
1585 printk (KERN_INFO "floppy%d: setting %s %p!\n",
1586 drive, dtp->name, dtp);
1587 UDT = dtp;
1588 set_capacity(floppy->disk, UDT->blocks);
1589
1590 if (cmd == FDDEFPRM) {
1591 /* save settings as permanent default type */
1592 default_params[drive].name = dtp->name;
1593 default_params[drive].spt = dtp->spt;
1594 default_params[drive].blocks = dtp->blocks;
1595 default_params[drive].fdc_speed = dtp->fdc_speed;
1596 default_params[drive].stretch = dtp->stretch;
1597 }
1598
1599 return 0;
1600 }
1601
1602 }
1603
1604 /* no matching disk type found above - setting user_params */
1605
1606 if (cmd == FDDEFPRM) {
1607 /* set permanent type */
1608 dtp = &default_params[drive];
1609 } else
1610 /* set user type (reset by disk change!) */
1611 dtp = &user_params[drive];
1612
1613 dtp->name = "user format";
1614 dtp->blocks = setprm.size;
1615 dtp->spt = setprm.sect;
1616 if (setprm.sect > 14)
1617 dtp->fdc_speed = 3;
1618 else
1619 dtp->fdc_speed = 0;
1620 dtp->stretch = setprm.stretch;
1621
1622 if (UD.flags & FTD_MSG)
1623 printk (KERN_INFO "floppy%d: blk %d spt %d str %d!\n",
1624 drive, dtp->blocks, dtp->spt, dtp->stretch);
1625
1626 /* sanity check */
1627 if (!dtp || setprm.track != dtp->blocks/dtp->spt/2 ||
1628 setprm.head != 2) {
1629 redo_fd_request();
1630 return -EINVAL;
1631 }
1632
1633 UDT = dtp;
1634 set_capacity(floppy->disk, UDT->blocks);
1635
1636 return 0;
1637 case FDMSGON:
1638 UD.flags |= FTD_MSG;
1639 return 0;
1640 case FDMSGOFF:
1641 UD.flags &= ~FTD_MSG;
1642 return 0;
1643 case FDSETEMSGTRESH:
1644 return -EINVAL;
1645 case FDFMTBEG:
1646 return 0;
1647 case FDFMTTRK:
1648 if (floppy->ref != 1 && floppy->ref != -1)
1649 return -EBUSY;
1650 if (copy_from_user(&fmt_desc, (void *) param, sizeof(fmt_desc)))
1651 return -EFAULT;
1652 return do_format(drive, type, &fmt_desc);
1653 case FDCLRPRM:
1654 UDT = NULL;
1655 /* MSch: invalidate default_params */
1656 default_params[drive].blocks = 0;
1657 set_capacity(floppy->disk, MAX_DISK_SIZE * 2);
1658 case FDFMTEND:
1659 case FDFLUSH:
1660 /* invalidate the buffer track to force a reread */
1661 BufferDrive = -1;
1662 set_bit(drive, &fake_change);
1663 check_disk_change(inode->i_bdev);
1664 return 0;
1665 default:
1666 return -EINVAL;
1667 }
1668}
1669
1670
1671/* Initialize the 'unit' variable for drive 'drive' */
1672
1673static void __init fd_probe( int drive )
1674{
1675 UD.connected = 0;
1676 UDT = NULL;
1677
1678 if (!fd_test_drive_present( drive ))
1679 return;
1680
1681 UD.connected = 1;
1682 UD.track = 0;
1683 switch( UserSteprate[drive] ) {
1684 case 2:
1685 UD.steprate = FDCSTEP_2;
1686 break;
1687 case 3:
1688 UD.steprate = FDCSTEP_3;
1689 break;
1690 case 6:
1691 UD.steprate = FDCSTEP_6;
1692 break;
1693 case 12:
1694 UD.steprate = FDCSTEP_12;
1695 break;
1696 default: /* should be -1 for "not set by user" */
1697 if (ATARIHW_PRESENT( FDCSPEED ) || MACH_IS_MEDUSA)
1698 UD.steprate = FDCSTEP_3;
1699 else
1700 UD.steprate = FDCSTEP_6;
1701 break;
1702 }
1703 MotorOn = 1; /* from probe restore operation! */
1704}
1705
1706
1707/* This function tests the physical presence of a floppy drive (not
1708 * whether a disk is inserted). This is done by issuing a restore
1709 * command, waiting max. 2 seconds (that should be enough to move the
1710 * head across the whole disk) and looking at the state of the "TR00"
1711 * signal. This should now be raised if there is a drive connected
1712 * (and there is no hardware failure :-) Otherwise, the drive is
1713 * declared absent.
1714 */
1715
1716static int __init fd_test_drive_present( int drive )
1717{
1718 unsigned long timeout;
1719 unsigned char status;
1720 int ok;
1721
1722 if (drive >= (MACH_IS_FALCON ? 1 : 2)) return( 0 );
1723 fd_select_drive( drive );
1724
1725 /* disable interrupt temporarily */
1726 atari_turnoff_irq( IRQ_MFP_FDC );
1727 FDC_WRITE (FDCREG_TRACK, 0xff00);
1728 FDC_WRITE( FDCREG_CMD, FDCCMD_RESTORE | FDCCMDADD_H | FDCSTEP_6 );
1729
1730 timeout = jiffies + 2*HZ+HZ/2;
1731 while (time_before(jiffies, timeout))
1732 if (!(mfp.par_dt_reg & 0x20))
1733 break;
1734
1735 status = FDC_READ( FDCREG_STATUS );
1736 ok = (status & FDCSTAT_TR00) != 0;
1737
1738 /* force interrupt to abort restore operation (FDC would try
1739 * about 50 seconds!) */
1740 FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI );
1741 udelay(500);
1742 status = FDC_READ( FDCREG_STATUS );
1743 udelay(20);
1744
1745 if (ok) {
1746 /* dummy seek command to make WP bit accessible */
1747 FDC_WRITE( FDCREG_DATA, 0 );
1748 FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK );
1749 while( mfp.par_dt_reg & 0x20 )
1750 ;
1751 status = FDC_READ( FDCREG_STATUS );
1752 }
1753
1754 atari_turnon_irq( IRQ_MFP_FDC );
1755 return( ok );
1756}
1757
1758
1759/* Look how many and which kind of drives are connected. If there are
1760 * floppies, additionally start the disk-change and motor-off timers.
1761 */
1762
1763static void __init config_types( void )
1764{
1765 int drive, cnt = 0;
1766
1767 /* for probing drives, set the FDC speed to 8 MHz */
1768 if (ATARIHW_PRESENT(FDCSPEED))
1769 dma_wd.fdc_speed = 0;
1770
1771 printk(KERN_INFO "Probing floppy drive(s):\n");
1772 for( drive = 0; drive < FD_MAX_UNITS; drive++ ) {
1773 fd_probe( drive );
1774 if (UD.connected) {
1775 printk(KERN_INFO "fd%d\n", drive);
1776 ++cnt;
1777 }
1778 }
1779
1780 if (FDC_READ( FDCREG_STATUS ) & FDCSTAT_BUSY) {
1781 /* If FDC is still busy from probing, give it another FORCI
1782 * command to abort the operation. If this isn't done, the FDC
1783 * will interrupt later and its IRQ line stays low, because
1784 * the status register isn't read. And this will block any
1785 * interrupts on this IRQ line :-(
1786 */
1787 FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI );
1788 udelay(500);
1789 FDC_READ( FDCREG_STATUS );
1790 udelay(20);
1791 }
1792
1793 if (cnt > 0) {
1794 start_motor_off_timer();
1795 if (cnt == 1) fd_select_drive( 0 );
1796 start_check_change_timer();
1797 }
1798}
1799
1800/*
1801 * floppy_open check for aliasing (/dev/fd0 can be the same as
1802 * /dev/PS0 etc), and disallows simultaneous access to the same
1803 * drive with different device numbers.
1804 */
1805
1806static int floppy_open( struct inode *inode, struct file *filp )
1807{
1808 struct atari_floppy_struct *p = inode->i_bdev->bd_disk->private_data;
1809 int type = iminor(inode) >> 2;
1810
1811 DPRINT(("fd_open: type=%d\n",type));
1812 if (p->ref && p->type != type)
1813 return -EBUSY;
1814
1815 if (p->ref == -1 || (p->ref && filp->f_flags & O_EXCL))
1816 return -EBUSY;
1817
1818 if (filp->f_flags & O_EXCL)
1819 p->ref = -1;
1820 else
1821 p->ref++;
1822
1823 p->type = type;
1824
1825 if (filp->f_flags & O_NDELAY)
1826 return 0;
1827
1828 if (filp->f_mode & 3) {
1829 check_disk_change(inode->i_bdev);
1830 if (filp->f_mode & 2) {
1831 if (p->wpstat) {
1832 if (p->ref < 0)
1833 p->ref = 0;
1834 else
1835 p->ref--;
1836 floppy_release(inode, filp);
1837 return -EROFS;
1838 }
1839 }
1840 }
1841 return 0;
1842}
1843
1844
1845static int floppy_release( struct inode * inode, struct file * filp )
1846{
1847 struct atari_floppy_struct *p = inode->i_bdev->bd_disk->private_data;
1848 if (p->ref < 0)
1849 p->ref = 0;
1850 else if (!p->ref--) {
1851 printk(KERN_ERR "floppy_release with fd_ref == 0");
1852 p->ref = 0;
1853 }
1854 return 0;
1855}
1856
1857static struct block_device_operations floppy_fops = {
1858 .owner = THIS_MODULE,
1859 .open = floppy_open,
1860 .release = floppy_release,
1861 .ioctl = fd_ioctl,
1862 .media_changed = check_floppy_change,
1863 .revalidate_disk= floppy_revalidate,
1864};
1865
1866static struct kobject *floppy_find(dev_t dev, int *part, void *data)
1867{
1868 int drive = *part & 3;
1869 int type = *part >> 2;
1870 if (drive >= FD_MAX_UNITS || type > NUM_DISK_MINORS)
1871 return NULL;
1872 *part = 0;
1873 return get_disk(unit[drive].disk);
1874}
1875
1876static int __init atari_floppy_init (void)
1877{
1878 int i;
1879
1880 if (!MACH_IS_ATARI)
1881 /* Amiga, Mac, ... don't have Atari-compatible floppy :-) */
1882 return -ENXIO;
1883
1884 if (MACH_IS_HADES)
1885 /* Hades doesn't have Atari-compatible floppy */
1886 return -ENXIO;
1887
1888 if (register_blkdev(FLOPPY_MAJOR,"fd"))
1889 return -EBUSY;
1890
1891 for (i = 0; i < FD_MAX_UNITS; i++) {
1892 unit[i].disk = alloc_disk(1);
1893 if (!unit[i].disk)
1894 goto Enomem;
1895 }
1896
1897 if (UseTrackbuffer < 0)
1898 /* not set by user -> use default: for now, we turn
1899 track buffering off for all Medusas, though it
1900 could be used with ones that have a counter
1901 card. But the test is too hard :-( */
1902 UseTrackbuffer = !MACH_IS_MEDUSA;
1903
1904 /* initialize variables */
1905 SelectedDrive = -1;
1906 BufferDrive = -1;
1907
1908 DMABuffer = atari_stram_alloc(BUFFER_SIZE+512, "ataflop");
1909 if (!DMABuffer) {
1910 printk(KERN_ERR "atari_floppy_init: cannot get dma buffer\n");
1911 goto Enomem;
1912 }
1913 TrackBuffer = DMABuffer + 512;
1914 PhysDMABuffer = virt_to_phys(DMABuffer);
1915 PhysTrackBuffer = virt_to_phys(TrackBuffer);
1916 BufferDrive = BufferSide = BufferTrack = -1;
1917
1918 floppy_queue = blk_init_queue(do_fd_request, &ataflop_lock);
1919 if (!floppy_queue)
1920 goto Enomem;
1921
1922 for (i = 0; i < FD_MAX_UNITS; i++) {
1923 unit[i].track = -1;
1924 unit[i].flags = 0;
1925 unit[i].disk->major = FLOPPY_MAJOR;
1926 unit[i].disk->first_minor = i;
1927 sprintf(unit[i].disk->disk_name, "fd%d", i);
1928 unit[i].disk->fops = &floppy_fops;
1929 unit[i].disk->private_data = &unit[i];
1930 unit[i].disk->queue = floppy_queue;
1931 set_capacity(unit[i].disk, MAX_DISK_SIZE * 2);
1932 add_disk(unit[i].disk);
1933 }
1934
1935 blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE,
1936 floppy_find, NULL, NULL);
1937
1938 printk(KERN_INFO "Atari floppy driver: max. %cD, %strack buffering\n",
1939 DriveType == 0 ? 'D' : DriveType == 1 ? 'H' : 'E',
1940 UseTrackbuffer ? "" : "no ");
1941 config_types();
1942
1943 return 0;
1944Enomem:
1945 while (i--)
1946 put_disk(unit[i].disk);
1947 if (floppy_queue)
1948 blk_cleanup_queue(floppy_queue);
1949 unregister_blkdev(FLOPPY_MAJOR, "fd");
1950 return -ENOMEM;
1951}
1952
1953
1954void __init atari_floppy_setup( char *str, int *ints )
1955{
1956 int i;
1957
1958 if (ints[0] < 1) {
1959 printk(KERN_ERR "ataflop_setup: no arguments!\n" );
1960 return;
1961 }
1962 else if (ints[0] > 2+FD_MAX_UNITS) {
1963 printk(KERN_ERR "ataflop_setup: too many arguments\n" );
1964 }
1965
1966 if (ints[1] < 0 || ints[1] > 2)
1967 printk(KERN_ERR "ataflop_setup: bad drive type\n" );
1968 else
1969 DriveType = ints[1];
1970
1971 if (ints[0] >= 2)
1972 UseTrackbuffer = (ints[2] > 0);
1973
1974 for( i = 3; i <= ints[0] && i-3 < FD_MAX_UNITS; ++i ) {
1975 if (ints[i] != 2 && ints[i] != 3 && ints[i] != 6 && ints[i] != 12)
1976 printk(KERN_ERR "ataflop_setup: bad steprate\n" );
1977 else
1978 UserSteprate[i-3] = ints[i];
1979 }
1980}
1981
1982static void atari_floppy_exit(void)
1983{
1984 int i;
1985 blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
1986 for (i = 0; i < FD_MAX_UNITS; i++) {
1987 del_gendisk(unit[i].disk);
1988 put_disk(unit[i].disk);
1989 }
1990 unregister_blkdev(FLOPPY_MAJOR, "fd");
1991
1992 blk_cleanup_queue(floppy_queue);
1993 del_timer_sync(&fd_timer);
1994 atari_stram_free( DMABuffer );
1995}
1996
1997module_init(atari_floppy_init)
1998module_exit(atari_floppy_exit)
1999
2000MODULE_LICENSE("GPL");