blob: 217d3daf73363e98cc5a9674470d080f41dcc16b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Definitions for talking to the PMU. The PMU is a microcontroller
3 * which controls battery charging and system power on PowerBook 3400
4 * and 2400 models as well as the RTC and various other things.
5 *
6 * Copyright (C) 1998 Paul Mackerras.
7 */
8
9#include <linux/config.h>
10
11#define PMU_DRIVER_VERSION 2
12
13/*
14 * PMU commands
15 */
16#define PMU_POWER_CTRL0 0x10 /* control power of some devices */
17#define PMU_POWER_CTRL 0x11 /* control power of some devices */
18#define PMU_ADB_CMD 0x20 /* send ADB packet */
19#define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */
20#define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */
21#define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */
22#define PMU_SET_RTC 0x30 /* set real-time clock */
23#define PMU_READ_RTC 0x38 /* read real-time clock */
24#define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */
25#define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */
26#define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */
27#define PMU_PCEJECT 0x4c /* eject PC-card from slot */
28#define PMU_BATTERY_STATE 0x6b /* report battery state etc. */
29#define PMU_SMART_BATTERY_STATE 0x6f /* report battery state (new way) */
30#define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */
31#define PMU_INT_ACK 0x78 /* read interrupt bits */
32#define PMU_SHUTDOWN 0x7e /* turn power off */
33#define PMU_CPU_SPEED 0x7d /* control CPU speed on some models */
34#define PMU_SLEEP 0x7f /* put CPU to sleep */
35#define PMU_POWER_EVENTS 0x8f /* Send power-event commands to PMU */
36#define PMU_I2C_CMD 0x9a /* I2C operations */
37#define PMU_RESET 0xd0 /* reset CPU */
38#define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */
39#define PMU_GET_COVER 0xdc /* report cover open/closed */
40#define PMU_SYSTEM_READY 0xdf /* tell PMU we are awake */
41#define PMU_GET_VERSION 0xea /* read the PMU version */
42
43/* Bits to use with the PMU_POWER_CTRL0 command */
44#define PMU_POW0_ON 0x80 /* OR this to power ON the device */
45#define PMU_POW0_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
46#define PMU_POW0_HARD_DRIVE 0x04 /* Hard drive power (on wallstreet/lombard ?) */
47
48/* Bits to use with the PMU_POWER_CTRL command */
49#define PMU_POW_ON 0x80 /* OR this to power ON the device */
50#define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
51#define PMU_POW_BACKLIGHT 0x01 /* backlight power */
52#define PMU_POW_CHARGER 0x02 /* battery charger power */
53#define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */
54#define PMU_POW_MEDIABAY 0x08 /* media bay power (wallstreet/lombard ?) */
55
56/* Bits in PMU interrupt and interrupt mask bytes */
57#define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */
58#define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */
59#define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */
60#define PMU_INT_BATTERY 0x20 /* Battery state change */
61#define PMU_INT_ENVIRONMENT 0x40 /* Environment interrupts */
62#define PMU_INT_TICK 0x80 /* 1-second tick interrupt */
63
64/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
65#define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */
66#define PMU_INT_WAITING_CHARGER 0x01 /* ??? */
67#define PMU_INT_AUTO_SRQ_POLL 0x02 /* ??? */
68
69/* Bits in the environement message (either obtained via PMU_GET_COVER,
70 * or via PMU_INT_ENVIRONMENT on core99 */
71#define PMU_ENV_LID_CLOSED 0x01 /* The lid is closed */
72
73/* I2C related definitions */
74#define PMU_I2C_MODE_SIMPLE 0
75#define PMU_I2C_MODE_STDSUB 1
76#define PMU_I2C_MODE_COMBINED 2
77
78#define PMU_I2C_BUS_STATUS 0
79#define PMU_I2C_BUS_SYSCLK 1
80#define PMU_I2C_BUS_POWER 2
81
82#define PMU_I2C_STATUS_OK 0
83#define PMU_I2C_STATUS_DATAREAD 1
84#define PMU_I2C_STATUS_BUSY 0xfe
85
86
87/* Kind of PMU (model) */
88enum {
89 PMU_UNKNOWN,
90 PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */
91 PMU_HEATHROW_BASED, /* PowerBook G3 series */
92 PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */
93 PMU_KEYLARGO_BASED, /* Core99 motherboard (PMU99) */
94 PMU_68K_V1, /* 68K PMU, version 1 */
95 PMU_68K_V2, /* 68K PMU, version 2 */
96};
97
98/* PMU PMU_POWER_EVENTS commands */
99enum {
100 PMU_PWR_GET_POWERUP_EVENTS = 0x00,
101 PMU_PWR_SET_POWERUP_EVENTS = 0x01,
102 PMU_PWR_CLR_POWERUP_EVENTS = 0x02,
103 PMU_PWR_GET_WAKEUP_EVENTS = 0x03,
104 PMU_PWR_SET_WAKEUP_EVENTS = 0x04,
105 PMU_PWR_CLR_WAKEUP_EVENTS = 0x05,
106};
107
108/* Power events wakeup bits */
109enum {
110 PMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */
111 PMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */
112 PMU_PWR_WAKEUP_AC_CHANGE = 0x04,
113 PMU_PWR_WAKEUP_LID_OPEN = 0x08,
114 PMU_PWR_WAKEUP_RING = 0x10,
115};
116
117/*
118 * Ioctl commands for the /dev/pmu device
119 */
120#include <linux/ioctl.h>
121
122/* no param */
123#define PMU_IOC_SLEEP _IO('B', 0)
124/* out param: u32* backlight value: 0 to 15 */
125#define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, size_t)
126/* in param: u32 backlight value: 0 to 15 */
127#define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, size_t)
128/* out param: u32* PMU model */
129#define PMU_IOC_GET_MODEL _IOR('B', 3, size_t)
130/* out param: u32* has_adb: 0 or 1 */
131#define PMU_IOC_HAS_ADB _IOR('B', 4, size_t)
132/* out param: u32* can_sleep: 0 or 1 */
133#define PMU_IOC_CAN_SLEEP _IOR('B', 5, size_t)
134/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
135#define PMU_IOC_GRAB_BACKLIGHT _IOR('B', 6, size_t)
136
137#ifdef __KERNEL__
138
139extern int find_via_pmu(void);
140
141extern int pmu_request(struct adb_request *req,
142 void (*done)(struct adb_request *), int nbytes, ...);
Benjamin Herrenschmidt730745a2006-01-07 11:30:44 +1100143extern int pmu_queue_request(struct adb_request *req);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144extern void pmu_poll(void);
145extern void pmu_poll_adb(void); /* For use by xmon */
146extern void pmu_wait_complete(struct adb_request *req);
147
148/* For use before switching interrupts off for a long time;
149 * warning: not stackable
150 */
151extern void pmu_suspend(void);
152extern void pmu_resume(void);
153
154extern void pmu_enable_irled(int on);
155
156extern void pmu_restart(void);
157extern void pmu_shutdown(void);
158extern void pmu_unlock(void);
159
160extern int pmu_present(void);
161extern int pmu_get_model(void);
162
Benjamin Herrenschmidt8c870932005-06-27 14:36:34 -0700163#ifdef CONFIG_PM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164/*
165 * Stuff for putting the powerbook to sleep and waking it again.
166 *
167 */
168#include <linux/list.h>
169
170struct pmu_sleep_notifier
171{
172 int (*notifier_call)(struct pmu_sleep_notifier *self, int when);
173 int priority;
174 struct list_head list;
175};
176
177/* Code values for calling sleep/wakeup handlers
178 *
179 * Note: If a sleep request got cancelled, all drivers will get
180 * the PBOOK_SLEEP_REJECT, even those who didn't get the PBOOK_SLEEP_REQUEST.
181 */
182#define PBOOK_SLEEP_REQUEST 1
183#define PBOOK_SLEEP_NOW 2
184#define PBOOK_SLEEP_REJECT 3
185#define PBOOK_WAKE 4
186
187/* Result codes returned by the notifiers */
188#define PBOOK_SLEEP_OK 0
189#define PBOOK_SLEEP_REFUSE -1
190
191/* priority levels in notifiers */
192#define SLEEP_LEVEL_VIDEO 100 /* Video driver (first wake) */
193#define SLEEP_LEVEL_MEDIABAY 90 /* Media bay driver */
194#define SLEEP_LEVEL_BLOCK 80 /* IDE, SCSI */
195#define SLEEP_LEVEL_NET 70 /* bmac, gmac */
196#define SLEEP_LEVEL_MISC 60 /* Anything else */
197#define SLEEP_LEVEL_USERLAND 55 /* Reserved for apm_emu */
198#define SLEEP_LEVEL_ADB 50 /* ADB (async) */
199#define SLEEP_LEVEL_SOUND 40 /* Sound driver (blocking) */
200
201/* special register notifier functions */
202int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier);
203int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier);
204
Benjamin Herrenschmidt8c870932005-06-27 14:36:34 -0700205#endif /* CONFIG_PM */
206
Linus Torvalds1da177e2005-04-16 15:20:36 -0700207#define PMU_MAX_BATTERIES 2
208
209/* values for pmu_power_flags */
210#define PMU_PWR_AC_PRESENT 0x00000001
211
212/* values for pmu_battery_info.flags */
213#define PMU_BATT_PRESENT 0x00000001
214#define PMU_BATT_CHARGING 0x00000002
215#define PMU_BATT_TYPE_MASK 0x000000f0
216#define PMU_BATT_TYPE_SMART 0x00000010 /* Smart battery */
217#define PMU_BATT_TYPE_HOOPER 0x00000020 /* 3400/3500 */
218#define PMU_BATT_TYPE_COMET 0x00000030 /* 2400 */
219
220struct pmu_battery_info
221{
222 unsigned int flags;
223 unsigned int charge; /* current charge */
224 unsigned int max_charge; /* maximum charge */
225 signed int amperage; /* current, positive if charging */
226 unsigned int voltage; /* voltage */
227 unsigned int time_remaining; /* remaining time */
228};
229
230extern int pmu_battery_count;
231extern struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
232extern unsigned int pmu_power_flags;
233
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234#endif /* __KERNEL__ */