Bengt Jonsson | 1032fbf | 2011-04-01 14:43:33 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) ST-Ericsson SA 2010 |
| 3 | * |
| 4 | * License Terms: GNU General Public License v2 |
| 5 | * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson |
| 6 | * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson |
| 7 | * |
| 8 | * Power domain regulators on DB8500 |
| 9 | */ |
| 10 | |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/err.h> |
| 14 | #include <linux/spinlock.h> |
| 15 | #include <linux/platform_device.h> |
Mattias Nilsson | 73180f8 | 2011-08-12 10:28:10 +0200 | [diff] [blame^] | 16 | #include <linux/mfd/dbx500-prcmu.h> |
Bengt Jonsson | 1032fbf | 2011-04-01 14:43:33 +0200 | [diff] [blame] | 17 | #include <linux/regulator/driver.h> |
| 18 | #include <linux/regulator/machine.h> |
| 19 | #include <linux/regulator/db8500-prcmu.h> |
| 20 | |
| 21 | /* |
| 22 | * power state reference count |
| 23 | */ |
| 24 | static int power_state_active_cnt; /* will initialize to zero */ |
| 25 | static DEFINE_SPINLOCK(power_state_active_lock); |
| 26 | |
| 27 | static void power_state_active_enable(void) |
| 28 | { |
| 29 | unsigned long flags; |
| 30 | |
| 31 | spin_lock_irqsave(&power_state_active_lock, flags); |
| 32 | power_state_active_cnt++; |
| 33 | spin_unlock_irqrestore(&power_state_active_lock, flags); |
| 34 | } |
| 35 | |
| 36 | static int power_state_active_disable(void) |
| 37 | { |
| 38 | int ret = 0; |
| 39 | unsigned long flags; |
| 40 | |
| 41 | spin_lock_irqsave(&power_state_active_lock, flags); |
| 42 | if (power_state_active_cnt <= 0) { |
| 43 | pr_err("power state: unbalanced enable/disable calls\n"); |
| 44 | ret = -EINVAL; |
| 45 | goto out; |
| 46 | } |
| 47 | |
| 48 | power_state_active_cnt--; |
| 49 | out: |
| 50 | spin_unlock_irqrestore(&power_state_active_lock, flags); |
| 51 | return ret; |
| 52 | } |
| 53 | |
| 54 | /* |
| 55 | * Exported interface for CPUIdle only. This function is called when interrupts |
| 56 | * are turned off. Hence, no locking. |
| 57 | */ |
| 58 | int power_state_active_is_enabled(void) |
| 59 | { |
| 60 | return (power_state_active_cnt > 0); |
| 61 | } |
| 62 | |
| 63 | /** |
| 64 | * struct db8500_regulator_info - db8500 regulator information |
| 65 | * @dev: device pointer |
| 66 | * @desc: regulator description |
| 67 | * @rdev: regulator device pointer |
| 68 | * @is_enabled: status of the regulator |
| 69 | * @epod_id: id for EPOD (power domain) |
| 70 | * @is_ramret: RAM retention switch for EPOD (power domain) |
| 71 | * @operating_point: operating point (only for vape, to be removed) |
| 72 | * |
| 73 | */ |
| 74 | struct db8500_regulator_info { |
| 75 | struct device *dev; |
| 76 | struct regulator_desc desc; |
| 77 | struct regulator_dev *rdev; |
| 78 | bool is_enabled; |
| 79 | u16 epod_id; |
| 80 | bool is_ramret; |
| 81 | bool exclude_from_power_state; |
| 82 | unsigned int operating_point; |
| 83 | }; |
| 84 | |
| 85 | static int db8500_regulator_enable(struct regulator_dev *rdev) |
| 86 | { |
| 87 | struct db8500_regulator_info *info = rdev_get_drvdata(rdev); |
| 88 | |
| 89 | if (info == NULL) |
| 90 | return -EINVAL; |
| 91 | |
| 92 | dev_vdbg(rdev_get_dev(rdev), "regulator-%s-enable\n", |
| 93 | info->desc.name); |
| 94 | |
| 95 | info->is_enabled = true; |
| 96 | if (!info->exclude_from_power_state) |
| 97 | power_state_active_enable(); |
| 98 | |
| 99 | return 0; |
| 100 | } |
| 101 | |
| 102 | static int db8500_regulator_disable(struct regulator_dev *rdev) |
| 103 | { |
| 104 | struct db8500_regulator_info *info = rdev_get_drvdata(rdev); |
| 105 | int ret = 0; |
| 106 | |
| 107 | if (info == NULL) |
| 108 | return -EINVAL; |
| 109 | |
| 110 | dev_vdbg(rdev_get_dev(rdev), "regulator-%s-disable\n", |
| 111 | info->desc.name); |
| 112 | |
| 113 | info->is_enabled = false; |
| 114 | if (!info->exclude_from_power_state) |
| 115 | ret = power_state_active_disable(); |
| 116 | |
| 117 | return ret; |
| 118 | } |
| 119 | |
| 120 | static int db8500_regulator_is_enabled(struct regulator_dev *rdev) |
| 121 | { |
| 122 | struct db8500_regulator_info *info = rdev_get_drvdata(rdev); |
| 123 | |
| 124 | if (info == NULL) |
| 125 | return -EINVAL; |
| 126 | |
| 127 | dev_vdbg(rdev_get_dev(rdev), "regulator-%s-is_enabled (is_enabled):" |
| 128 | " %i\n", info->desc.name, info->is_enabled); |
| 129 | |
| 130 | return info->is_enabled; |
| 131 | } |
| 132 | |
| 133 | /* db8500 regulator operations */ |
| 134 | static struct regulator_ops db8500_regulator_ops = { |
| 135 | .enable = db8500_regulator_enable, |
| 136 | .disable = db8500_regulator_disable, |
| 137 | .is_enabled = db8500_regulator_is_enabled, |
| 138 | }; |
| 139 | |
| 140 | /* |
| 141 | * EPOD control |
| 142 | */ |
| 143 | static bool epod_on[NUM_EPOD_ID]; |
| 144 | static bool epod_ramret[NUM_EPOD_ID]; |
| 145 | |
| 146 | static int enable_epod(u16 epod_id, bool ramret) |
| 147 | { |
| 148 | int ret; |
| 149 | |
| 150 | if (ramret) { |
| 151 | if (!epod_on[epod_id]) { |
| 152 | ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET); |
| 153 | if (ret < 0) |
| 154 | return ret; |
| 155 | } |
| 156 | epod_ramret[epod_id] = true; |
| 157 | } else { |
| 158 | ret = prcmu_set_epod(epod_id, EPOD_STATE_ON); |
| 159 | if (ret < 0) |
| 160 | return ret; |
| 161 | epod_on[epod_id] = true; |
| 162 | } |
| 163 | |
| 164 | return 0; |
| 165 | } |
| 166 | |
| 167 | static int disable_epod(u16 epod_id, bool ramret) |
| 168 | { |
| 169 | int ret; |
| 170 | |
| 171 | if (ramret) { |
| 172 | if (!epod_on[epod_id]) { |
| 173 | ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF); |
| 174 | if (ret < 0) |
| 175 | return ret; |
| 176 | } |
| 177 | epod_ramret[epod_id] = false; |
| 178 | } else { |
| 179 | if (epod_ramret[epod_id]) { |
| 180 | ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET); |
| 181 | if (ret < 0) |
| 182 | return ret; |
| 183 | } else { |
| 184 | ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF); |
| 185 | if (ret < 0) |
| 186 | return ret; |
| 187 | } |
| 188 | epod_on[epod_id] = false; |
| 189 | } |
| 190 | |
| 191 | return 0; |
| 192 | } |
| 193 | |
| 194 | /* |
| 195 | * Regulator switch |
| 196 | */ |
| 197 | static int db8500_regulator_switch_enable(struct regulator_dev *rdev) |
| 198 | { |
| 199 | struct db8500_regulator_info *info = rdev_get_drvdata(rdev); |
| 200 | int ret; |
| 201 | |
| 202 | if (info == NULL) |
| 203 | return -EINVAL; |
| 204 | |
| 205 | dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-enable\n", |
| 206 | info->desc.name); |
| 207 | |
| 208 | ret = enable_epod(info->epod_id, info->is_ramret); |
| 209 | if (ret < 0) { |
| 210 | dev_err(rdev_get_dev(rdev), |
| 211 | "regulator-switch-%s-enable: prcmu call failed\n", |
| 212 | info->desc.name); |
| 213 | goto out; |
| 214 | } |
| 215 | |
| 216 | info->is_enabled = true; |
| 217 | out: |
| 218 | return ret; |
| 219 | } |
| 220 | |
| 221 | static int db8500_regulator_switch_disable(struct regulator_dev *rdev) |
| 222 | { |
| 223 | struct db8500_regulator_info *info = rdev_get_drvdata(rdev); |
| 224 | int ret; |
| 225 | |
| 226 | if (info == NULL) |
| 227 | return -EINVAL; |
| 228 | |
| 229 | dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-disable\n", |
| 230 | info->desc.name); |
| 231 | |
| 232 | ret = disable_epod(info->epod_id, info->is_ramret); |
| 233 | if (ret < 0) { |
| 234 | dev_err(rdev_get_dev(rdev), |
| 235 | "regulator_switch-%s-disable: prcmu call failed\n", |
| 236 | info->desc.name); |
| 237 | goto out; |
| 238 | } |
| 239 | |
| 240 | info->is_enabled = 0; |
| 241 | out: |
| 242 | return ret; |
| 243 | } |
| 244 | |
| 245 | static int db8500_regulator_switch_is_enabled(struct regulator_dev *rdev) |
| 246 | { |
| 247 | struct db8500_regulator_info *info = rdev_get_drvdata(rdev); |
| 248 | |
| 249 | if (info == NULL) |
| 250 | return -EINVAL; |
| 251 | |
| 252 | dev_vdbg(rdev_get_dev(rdev), |
| 253 | "regulator-switch-%s-is_enabled (is_enabled): %i\n", |
| 254 | info->desc.name, info->is_enabled); |
| 255 | |
| 256 | return info->is_enabled; |
| 257 | } |
| 258 | |
| 259 | static struct regulator_ops db8500_regulator_switch_ops = { |
| 260 | .enable = db8500_regulator_switch_enable, |
| 261 | .disable = db8500_regulator_switch_disable, |
| 262 | .is_enabled = db8500_regulator_switch_is_enabled, |
| 263 | }; |
| 264 | |
| 265 | /* |
| 266 | * Regulator information |
| 267 | */ |
| 268 | static struct db8500_regulator_info |
Axel Lin | 9060950 | 2011-07-06 11:41:12 +0800 | [diff] [blame] | 269 | db8500_regulator_info[DB8500_NUM_REGULATORS] = { |
Bengt Jonsson | 1032fbf | 2011-04-01 14:43:33 +0200 | [diff] [blame] | 270 | [DB8500_REGULATOR_VAPE] = { |
| 271 | .desc = { |
| 272 | .name = "db8500-vape", |
| 273 | .id = DB8500_REGULATOR_VAPE, |
| 274 | .ops = &db8500_regulator_ops, |
| 275 | .type = REGULATOR_VOLTAGE, |
| 276 | .owner = THIS_MODULE, |
| 277 | }, |
| 278 | }, |
| 279 | [DB8500_REGULATOR_VARM] = { |
| 280 | .desc = { |
| 281 | .name = "db8500-varm", |
| 282 | .id = DB8500_REGULATOR_VARM, |
| 283 | .ops = &db8500_regulator_ops, |
| 284 | .type = REGULATOR_VOLTAGE, |
| 285 | .owner = THIS_MODULE, |
| 286 | }, |
| 287 | }, |
| 288 | [DB8500_REGULATOR_VMODEM] = { |
| 289 | .desc = { |
| 290 | .name = "db8500-vmodem", |
| 291 | .id = DB8500_REGULATOR_VMODEM, |
| 292 | .ops = &db8500_regulator_ops, |
| 293 | .type = REGULATOR_VOLTAGE, |
| 294 | .owner = THIS_MODULE, |
| 295 | }, |
| 296 | }, |
| 297 | [DB8500_REGULATOR_VPLL] = { |
| 298 | .desc = { |
| 299 | .name = "db8500-vpll", |
| 300 | .id = DB8500_REGULATOR_VPLL, |
| 301 | .ops = &db8500_regulator_ops, |
| 302 | .type = REGULATOR_VOLTAGE, |
| 303 | .owner = THIS_MODULE, |
| 304 | }, |
| 305 | }, |
| 306 | [DB8500_REGULATOR_VSMPS1] = { |
| 307 | .desc = { |
| 308 | .name = "db8500-vsmps1", |
| 309 | .id = DB8500_REGULATOR_VSMPS1, |
| 310 | .ops = &db8500_regulator_ops, |
| 311 | .type = REGULATOR_VOLTAGE, |
| 312 | .owner = THIS_MODULE, |
| 313 | }, |
| 314 | }, |
| 315 | [DB8500_REGULATOR_VSMPS2] = { |
| 316 | .desc = { |
| 317 | .name = "db8500-vsmps2", |
| 318 | .id = DB8500_REGULATOR_VSMPS2, |
| 319 | .ops = &db8500_regulator_ops, |
| 320 | .type = REGULATOR_VOLTAGE, |
| 321 | .owner = THIS_MODULE, |
| 322 | }, |
| 323 | .exclude_from_power_state = true, |
| 324 | }, |
| 325 | [DB8500_REGULATOR_VSMPS3] = { |
| 326 | .desc = { |
| 327 | .name = "db8500-vsmps3", |
| 328 | .id = DB8500_REGULATOR_VSMPS3, |
| 329 | .ops = &db8500_regulator_ops, |
| 330 | .type = REGULATOR_VOLTAGE, |
| 331 | .owner = THIS_MODULE, |
| 332 | }, |
| 333 | }, |
| 334 | [DB8500_REGULATOR_VRF1] = { |
| 335 | .desc = { |
| 336 | .name = "db8500-vrf1", |
| 337 | .id = DB8500_REGULATOR_VRF1, |
| 338 | .ops = &db8500_regulator_ops, |
| 339 | .type = REGULATOR_VOLTAGE, |
| 340 | .owner = THIS_MODULE, |
| 341 | }, |
| 342 | }, |
| 343 | [DB8500_REGULATOR_SWITCH_SVAMMDSP] = { |
| 344 | .desc = { |
| 345 | .name = "db8500-sva-mmdsp", |
| 346 | .id = DB8500_REGULATOR_SWITCH_SVAMMDSP, |
| 347 | .ops = &db8500_regulator_switch_ops, |
| 348 | .type = REGULATOR_VOLTAGE, |
| 349 | .owner = THIS_MODULE, |
| 350 | }, |
| 351 | .epod_id = EPOD_ID_SVAMMDSP, |
| 352 | }, |
| 353 | [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = { |
| 354 | .desc = { |
| 355 | .name = "db8500-sva-mmdsp-ret", |
| 356 | .id = DB8500_REGULATOR_SWITCH_SVAMMDSPRET, |
| 357 | .ops = &db8500_regulator_switch_ops, |
| 358 | .type = REGULATOR_VOLTAGE, |
| 359 | .owner = THIS_MODULE, |
| 360 | }, |
| 361 | .epod_id = EPOD_ID_SVAMMDSP, |
| 362 | .is_ramret = true, |
| 363 | }, |
| 364 | [DB8500_REGULATOR_SWITCH_SVAPIPE] = { |
| 365 | .desc = { |
| 366 | .name = "db8500-sva-pipe", |
| 367 | .id = DB8500_REGULATOR_SWITCH_SVAPIPE, |
| 368 | .ops = &db8500_regulator_switch_ops, |
| 369 | .type = REGULATOR_VOLTAGE, |
| 370 | .owner = THIS_MODULE, |
| 371 | }, |
| 372 | .epod_id = EPOD_ID_SVAPIPE, |
| 373 | }, |
| 374 | [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { |
| 375 | .desc = { |
| 376 | .name = "db8500-sia-mmdsp", |
| 377 | .id = DB8500_REGULATOR_SWITCH_SIAMMDSP, |
| 378 | .ops = &db8500_regulator_switch_ops, |
| 379 | .type = REGULATOR_VOLTAGE, |
| 380 | .owner = THIS_MODULE, |
| 381 | }, |
| 382 | .epod_id = EPOD_ID_SIAMMDSP, |
| 383 | }, |
| 384 | [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = { |
| 385 | .desc = { |
| 386 | .name = "db8500-sia-mmdsp-ret", |
| 387 | .id = DB8500_REGULATOR_SWITCH_SIAMMDSPRET, |
| 388 | .ops = &db8500_regulator_switch_ops, |
| 389 | .type = REGULATOR_VOLTAGE, |
| 390 | .owner = THIS_MODULE, |
| 391 | }, |
| 392 | .epod_id = EPOD_ID_SIAMMDSP, |
| 393 | .is_ramret = true, |
| 394 | }, |
| 395 | [DB8500_REGULATOR_SWITCH_SIAPIPE] = { |
| 396 | .desc = { |
| 397 | .name = "db8500-sia-pipe", |
| 398 | .id = DB8500_REGULATOR_SWITCH_SIAPIPE, |
| 399 | .ops = &db8500_regulator_switch_ops, |
| 400 | .type = REGULATOR_VOLTAGE, |
| 401 | .owner = THIS_MODULE, |
| 402 | }, |
| 403 | .epod_id = EPOD_ID_SIAPIPE, |
| 404 | }, |
| 405 | [DB8500_REGULATOR_SWITCH_SGA] = { |
| 406 | .desc = { |
| 407 | .name = "db8500-sga", |
| 408 | .id = DB8500_REGULATOR_SWITCH_SGA, |
| 409 | .ops = &db8500_regulator_switch_ops, |
| 410 | .type = REGULATOR_VOLTAGE, |
| 411 | .owner = THIS_MODULE, |
| 412 | }, |
| 413 | .epod_id = EPOD_ID_SGA, |
| 414 | }, |
| 415 | [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = { |
| 416 | .desc = { |
| 417 | .name = "db8500-b2r2-mcde", |
| 418 | .id = DB8500_REGULATOR_SWITCH_B2R2_MCDE, |
| 419 | .ops = &db8500_regulator_switch_ops, |
| 420 | .type = REGULATOR_VOLTAGE, |
| 421 | .owner = THIS_MODULE, |
| 422 | }, |
| 423 | .epod_id = EPOD_ID_B2R2_MCDE, |
| 424 | }, |
| 425 | [DB8500_REGULATOR_SWITCH_ESRAM12] = { |
| 426 | .desc = { |
| 427 | .name = "db8500-esram12", |
| 428 | .id = DB8500_REGULATOR_SWITCH_ESRAM12, |
| 429 | .ops = &db8500_regulator_switch_ops, |
| 430 | .type = REGULATOR_VOLTAGE, |
| 431 | .owner = THIS_MODULE, |
| 432 | }, |
| 433 | .epod_id = EPOD_ID_ESRAM12, |
| 434 | .is_enabled = true, |
| 435 | }, |
| 436 | [DB8500_REGULATOR_SWITCH_ESRAM12RET] = { |
| 437 | .desc = { |
| 438 | .name = "db8500-esram12-ret", |
| 439 | .id = DB8500_REGULATOR_SWITCH_ESRAM12RET, |
| 440 | .ops = &db8500_regulator_switch_ops, |
| 441 | .type = REGULATOR_VOLTAGE, |
| 442 | .owner = THIS_MODULE, |
| 443 | }, |
| 444 | .epod_id = EPOD_ID_ESRAM12, |
| 445 | .is_ramret = true, |
| 446 | }, |
| 447 | [DB8500_REGULATOR_SWITCH_ESRAM34] = { |
| 448 | .desc = { |
| 449 | .name = "db8500-esram34", |
| 450 | .id = DB8500_REGULATOR_SWITCH_ESRAM34, |
| 451 | .ops = &db8500_regulator_switch_ops, |
| 452 | .type = REGULATOR_VOLTAGE, |
| 453 | .owner = THIS_MODULE, |
| 454 | }, |
| 455 | .epod_id = EPOD_ID_ESRAM34, |
| 456 | .is_enabled = true, |
| 457 | }, |
| 458 | [DB8500_REGULATOR_SWITCH_ESRAM34RET] = { |
| 459 | .desc = { |
| 460 | .name = "db8500-esram34-ret", |
| 461 | .id = DB8500_REGULATOR_SWITCH_ESRAM34RET, |
| 462 | .ops = &db8500_regulator_switch_ops, |
| 463 | .type = REGULATOR_VOLTAGE, |
| 464 | .owner = THIS_MODULE, |
| 465 | }, |
| 466 | .epod_id = EPOD_ID_ESRAM34, |
| 467 | .is_ramret = true, |
| 468 | }, |
| 469 | }; |
| 470 | |
| 471 | static int __devinit db8500_regulator_probe(struct platform_device *pdev) |
| 472 | { |
Samuel Ortiz | 17cf8b4 | 2011-05-26 10:06:31 +0200 | [diff] [blame] | 473 | struct regulator_init_data *db8500_init_data = |
| 474 | dev_get_platdata(&pdev->dev); |
Bengt Jonsson | 1032fbf | 2011-04-01 14:43:33 +0200 | [diff] [blame] | 475 | int i, err; |
| 476 | |
| 477 | /* register all regulators */ |
| 478 | for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) { |
| 479 | struct db8500_regulator_info *info; |
| 480 | struct regulator_init_data *init_data = &db8500_init_data[i]; |
| 481 | |
| 482 | /* assign per-regulator data */ |
| 483 | info = &db8500_regulator_info[i]; |
| 484 | info->dev = &pdev->dev; |
| 485 | |
| 486 | /* register with the regulator framework */ |
| 487 | info->rdev = regulator_register(&info->desc, &pdev->dev, |
| 488 | init_data, info); |
| 489 | if (IS_ERR(info->rdev)) { |
| 490 | err = PTR_ERR(info->rdev); |
| 491 | dev_err(&pdev->dev, "failed to register %s: err %i\n", |
| 492 | info->desc.name, err); |
| 493 | |
| 494 | /* if failing, unregister all earlier regulators */ |
Axel Lin | 9060950 | 2011-07-06 11:41:12 +0800 | [diff] [blame] | 495 | while (--i >= 0) { |
Bengt Jonsson | 1032fbf | 2011-04-01 14:43:33 +0200 | [diff] [blame] | 496 | info = &db8500_regulator_info[i]; |
| 497 | regulator_unregister(info->rdev); |
Bengt Jonsson | 1032fbf | 2011-04-01 14:43:33 +0200 | [diff] [blame] | 498 | } |
| 499 | return err; |
| 500 | } |
| 501 | |
| 502 | dev_dbg(rdev_get_dev(info->rdev), |
| 503 | "regulator-%s-probed\n", info->desc.name); |
| 504 | } |
| 505 | |
| 506 | return 0; |
| 507 | } |
| 508 | |
| 509 | static int __exit db8500_regulator_remove(struct platform_device *pdev) |
| 510 | { |
| 511 | int i; |
| 512 | |
| 513 | for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) { |
| 514 | struct db8500_regulator_info *info; |
| 515 | info = &db8500_regulator_info[i]; |
| 516 | |
| 517 | dev_vdbg(rdev_get_dev(info->rdev), |
| 518 | "regulator-%s-remove\n", info->desc.name); |
| 519 | |
| 520 | regulator_unregister(info->rdev); |
| 521 | } |
| 522 | |
| 523 | return 0; |
| 524 | } |
| 525 | |
| 526 | static struct platform_driver db8500_regulator_driver = { |
| 527 | .driver = { |
| 528 | .name = "db8500-prcmu-regulators", |
| 529 | .owner = THIS_MODULE, |
| 530 | }, |
| 531 | .probe = db8500_regulator_probe, |
| 532 | .remove = __exit_p(db8500_regulator_remove), |
| 533 | }; |
| 534 | |
| 535 | static int __init db8500_regulator_init(void) |
| 536 | { |
Axel Lin | 9060950 | 2011-07-06 11:41:12 +0800 | [diff] [blame] | 537 | return platform_driver_register(&db8500_regulator_driver); |
Bengt Jonsson | 1032fbf | 2011-04-01 14:43:33 +0200 | [diff] [blame] | 538 | } |
| 539 | |
| 540 | static void __exit db8500_regulator_exit(void) |
| 541 | { |
| 542 | platform_driver_unregister(&db8500_regulator_driver); |
| 543 | } |
| 544 | |
| 545 | arch_initcall(db8500_regulator_init); |
| 546 | module_exit(db8500_regulator_exit); |
| 547 | |
| 548 | MODULE_AUTHOR("STMicroelectronics/ST-Ericsson"); |
| 549 | MODULE_DESCRIPTION("DB8500 regulator driver"); |
| 550 | MODULE_LICENSE("GPL v2"); |