blob: 5eebfaad1226d5384509e6cc2eaf982bb5d9c44d [file] [log] [blame]
Dinh Nguyen0adf8822011-03-21 16:30:37 -05001/*
2 * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
3 */
4
5/*
6 * The code contained herein is licensed under the GNU General Public
7 * License. You may obtain a copy of the GNU General Public License
8 * Version 2 or later at the following locations:
9 *
10 * http://www.opensource.org/licenses/gpl-license.html
11 * http://www.gnu.org/copyleft/gpl.html
12 */
13#include <linux/platform_device.h>
14#include <linux/io.h>
15#include <mach/hardware.h>
Shawn Guo41e7daf2011-09-28 17:16:06 +080016#include <mach/common.h>
Dinh Nguyen0adf8822011-03-21 16:30:37 -050017#include "crm_regs.h"
18
19/* set cpu low power mode before WFI instruction. This function is called
20 * mx5 because it can be used for mx50, mx51, and mx53.*/
21void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
22{
23 u32 plat_lpc, arm_srpgcr, ccm_clpcr;
24 u32 empgc0, empgc1;
25 int stop_mode = 0;
26
27 /* always allow platform to issue a deep sleep mode request */
28 plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
29 ~(MXC_CORTEXA8_PLAT_LPC_DSM);
30 ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
31 arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
32 empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
33 empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
34
35 switch (mode) {
36 case WAIT_CLOCKED:
37 break;
38 case WAIT_UNCLOCKED:
39 ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
40 break;
41 case WAIT_UNCLOCKED_POWER_OFF:
42 case STOP_POWER_OFF:
43 plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
44 | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
45 if (mode == WAIT_UNCLOCKED_POWER_OFF) {
46 ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
47 ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
48 ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
49 stop_mode = 0;
50 } else {
51 ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
52 ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
53 ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
54 ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
55 stop_mode = 1;
56 }
57 arm_srpgcr |= MXC_SRPGCR_PCR;
Dinh Nguyen0adf8822011-03-21 16:30:37 -050058 break;
59 case STOP_POWER_ON:
60 ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
61 break;
62 default:
63 printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
64 return;
65 }
66
67 __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
68 __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
69 __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
70
71 /* Enable NEON SRPG for all but MX50TO1.0. */
72 if (mx50_revision() != IMX_CHIP_REVISION_1_0)
73 __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
74
75 if (stop_mode) {
76 empgc0 |= MXC_SRPGCR_PCR;
77 empgc1 |= MXC_SRPGCR_PCR;
78
79 __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
80 __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
81 }
82}