blob: 3464ebc4cdbc63af6bb89b53e98cd0b5f72c5b68 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
2menu "Passive cards"
Linus Torvalds1da177e2005-04-16 15:20:36 -07003
4config ISDN_DRV_HISAX
5 tristate "HiSax SiemensChipSet driver support"
6 select CRC_CCITT
7 ---help---
8 This is a driver supporting the Siemens chipset on various
9 ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
10 S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
11 compatibles).
12
13 HiSax is just the name of this driver, not the name of any hardware.
14
15 If you have a card with such a chipset, you should say Y here and
16 also to the configuration option of the driver for your particular
17 card, below.
18
19if ISDN_DRV_HISAX!=n
20
21comment "D-channel protocol features"
22
23config HISAX_EURO
24 bool "HiSax Support for EURO/DSS1"
25 help
26 Say Y or N according to the D-channel protocol which your local
27 telephone service company provides.
28
29 The call control protocol E-DSS1 is used in most European countries.
30 If unsure, say Y.
31
32config DE_AOC
33 bool "Support for german chargeinfo"
34 depends on HISAX_EURO
35 help
36 If you want that the HiSax hardware driver sends messages to the
37 upper level of the isdn code on each AOCD (Advice Of Charge, During
38 the call -- transmission of the fee information during a call) and
39 on each AOCE (Advice Of Charge, at the End of the call --
40 transmission of fee information at the end of the call), say Y here.
41 This works only in Germany.
42
43config HISAX_NO_SENDCOMPLETE
44 bool "Disable sending complete"
45 depends on HISAX_EURO
46 help
47 If you have trouble with some ugly exchanges or you live in
48 Australia select this option.
49
50config HISAX_NO_LLC
51 bool "Disable sending low layer compatibility"
52 depends on HISAX_EURO
53 help
54 If you have trouble with some ugly exchanges try to select this
55 option.
56
57config HISAX_NO_KEYPAD
58 bool "Disable keypad protocol option"
59 depends on HISAX_EURO
60 help
61 If you like to send special dial strings including * or # without
62 using the keypad protocol, select this option.
63
64config HISAX_1TR6
65 bool "HiSax Support for german 1TR6"
66 help
67 Say Y or N according to the D-channel protocol which your local
68 telephone service company provides.
69
70 1TR6 is an old call control protocol which was used in Germany
71 before E-DSS1 was established. Nowadays, all new lines in Germany
72 use E-DSS1.
73
74config HISAX_NI1
75 bool "HiSax Support for US NI1"
76 help
77 Enable this if you like to use ISDN in US on a NI1 basic rate
78 interface.
79
80config HISAX_MAX_CARDS
81 int "Maximum number of cards supported by HiSax"
82 default "8"
83 help
84 This option allows you to specify the maximum number of cards which
85 the HiSax driver will be able to handle.
86
87comment "HiSax supported cards"
88
89config HISAX_16_0
90 bool "Teles 16.0/8.0"
91 depends on ISA
92 help
93 This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
94 and many compatibles.
95
96 See <file:Documentation/isdn/README.HiSax> on how to configure it
97 using the different cards, a different D-channel protocol, or
98 non-standard IRQ/port/shmem settings.
99
100config HISAX_16_3
101 bool "Teles 16.3 or PNP or PCMCIA"
102 help
103 This enables HiSax support for the Teles ISDN-cards S0-16.3 the
104 Teles/Creatix PnP and the Teles PCMCIA.
105
106 See <file:Documentation/isdn/README.HiSax> on how to configure it
107 using the different cards, a different D-channel protocol, or
108 non-standard IRQ/port settings.
109
110config HISAX_TELESPCI
111 bool "Teles PCI"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400112 depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113 help
114 This enables HiSax support for the Teles PCI.
115 See <file:Documentation/isdn/README.HiSax> on how to configure it.
116
117config HISAX_S0BOX
118 bool "Teles S0Box"
119 help
120 This enables HiSax support for the Teles/Creatix parallel port
121 S0BOX. See <file:Documentation/isdn/README.HiSax> on how to
122 configure it.
123
124config HISAX_AVM_A1
125 bool "AVM A1 (Fritz)"
126 depends on ISA
127 help
128 This enables HiSax support for the AVM A1 (aka "Fritz").
129
130 See <file:Documentation/isdn/README.HiSax> on how to configure it
131 using the different cards, a different D-channel protocol, or
132 non-standard IRQ/port settings.
133
134config HISAX_FRITZPCI
135 bool "AVM PnP/PCI (Fritz!PnP/PCI)"
Al Viro6622b8c2005-08-23 22:45:21 +0100136 depends on BROKEN || !PPC64
Linus Torvalds1da177e2005-04-16 15:20:36 -0700137 help
138 This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
139 See <file:Documentation/isdn/README.HiSax> on how to configure it.
140
141config HISAX_AVM_A1_PCMCIA
142 bool "AVM A1 PCMCIA (Fritz)"
143 help
144 This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
145 See <file:Documentation/isdn/README.HiSax> on how to configure it.
146
147config HISAX_ELSA
148 bool "Elsa cards"
149 help
150 This enables HiSax support for the Elsa Mircolink ISA cards, for the
151 Elsa Quickstep series cards and Elsa PCMCIA.
152
153 See <file:Documentation/isdn/README.HiSax> on how to configure it
154 using the different cards, a different D-channel protocol, or
155 non-standard IRQ/port settings.
156
157config HISAX_IX1MICROR2
158 bool "ITK ix1-micro Revision 2"
159 depends on ISA
160 help
161 This enables HiSax support for the ITK ix1-micro Revision 2 card.
162
163 See <file:Documentation/isdn/README.HiSax> on how to configure it
164 using the different cards, a different D-channel protocol, or
165 non-standard IRQ/port settings.
166
167config HISAX_DIEHLDIVA
168 bool "Eicon.Diehl Diva cards"
169 help
170 This enables HiSax support for the Eicon.Diehl Diva none PRO
171 versions passive ISDN cards.
172
173 See <file:Documentation/isdn/README.HiSax> on how to configure it
174 using the different cards, a different D-channel protocol, or
175 non-standard IRQ/port settings.
176
177config HISAX_ASUSCOM
178 bool "ASUSCOM ISA cards"
179 depends on ISA
180 help
181 This enables HiSax support for the AsusCom and their OEM versions
182 passive ISDN ISA cards.
183
184 See <file:Documentation/isdn/README.HiSax> on how to configure it
185 using the different cards, a different D-channel protocol, or
186 non-standard IRQ/port settings.
187
188config HISAX_TELEINT
189 bool "TELEINT cards"
190 depends on ISA
191 help
192 This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
193
194 See <file:Documentation/isdn/README.HiSax> on how to configure it
195 using the different cards, a different D-channel protocol, or
196 non-standard IRQ/port settings.
197
198config HISAX_HFCS
199 bool "HFC-S based cards"
200 depends on ISA
201 help
202 This enables HiSax support for the HFC-S 2BDS0 based cards, like
203 teles 16.3c.
204
205 See <file:Documentation/isdn/README.HiSax> on how to configure it
206 using the different cards, a different D-channel protocol, or
207 non-standard IRQ/port settings.
208
209config HISAX_SEDLBAUER
210 bool "Sedlbauer cards"
211 help
212 This enables HiSax support for the Sedlbauer passive ISDN cards.
213
214 See <file:Documentation/isdn/README.HiSax> on how to configure it
215 using the different cards, a different D-channel protocol, or
216 non-standard IRQ/port settings.
217
218config HISAX_SPORTSTER
219 bool "USR Sportster internal TA"
220 depends on ISA
221 help
222 This enables HiSax support for the USR Sportster internal TA card.
223
224 See <file:Documentation/isdn/README.HiSax> on how to configure it
225 using a different D-channel protocol, or non-standard IRQ/port
226 settings.
227
228config HISAX_MIC
229 bool "MIC card"
230 depends on ISA
231 help
232 This enables HiSax support for the ITH MIC card.
233
234 See <file:Documentation/isdn/README.HiSax> on how to configure it
235 using a different D-channel protocol, or non-standard IRQ/port
236 settings.
237
238config HISAX_NETJET
239 bool "NETjet card"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400240 depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700241 help
242 This enables HiSax support for the NetJet from Traverse
243 Technologies.
244
245 See <file:Documentation/isdn/README.HiSax> on how to configure it
246 using a different D-channel protocol, or non-standard IRQ/port
247 settings.
248
249config HISAX_NETJET_U
250 bool "NETspider U card"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400251 depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252 help
253 This enables HiSax support for the Netspider U interface ISDN card
254 from Traverse Technologies.
255 See <file:Documentation/isdn/README.HiSax> on how to configure it
256 using a different D-channel protocol, or non-standard IRQ/port
257 settings.
258
259config HISAX_NICCY
260 bool "Niccy PnP/PCI card"
261 help
262 This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
263
264 See <file:Documentation/isdn/README.HiSax> on how to configure it
265 using a different D-channel protocol, or non-standard IRQ/port
266 settings.
267
268config HISAX_ISURF
269 bool "Siemens I-Surf card"
270 depends on ISA
271 help
272 This enables HiSax support for the Siemens I-Talk/I-Surf card with
273 ISAR chip.
274 See <file:Documentation/isdn/README.HiSax> on how to configure it
275 using a different D-channel protocol, or non-standard IRQ/port
276 settings.
277
278config HISAX_HSTSAPHIR
279 bool "HST Saphir card"
280 depends on ISA
281 help
282 This enables HiSax support for the HST Saphir card.
283
284 See <file:Documentation/isdn/README.HiSax> on how to configure it
285 using a different D-channel protocol, or non-standard IRQ/port
286 settings.
287
288config HISAX_BKM_A4T
289 bool "Telekom A4T card"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400290 depends on PCI && PCI_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291 help
292 This enables HiSax support for the Telekom A4T card.
293
294 See <file:Documentation/isdn/README.HiSax> on how to configure it
295 using a different D-channel protocol, or non-standard IRQ/port
296 settings.
297
298config HISAX_SCT_QUADRO
299 bool "Scitel Quadro card"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400300 depends on PCI && PCI_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700301 help
302 This enables HiSax support for the Scitel Quadro card.
303
304 See <file:Documentation/isdn/README.HiSax> on how to configure it
305 using a different D-channel protocol, or non-standard IRQ/port
306 settings.
307
308config HISAX_GAZEL
309 bool "Gazel cards"
310 help
311 This enables HiSax support for the Gazel cards.
312
313 See <file:Documentation/isdn/README.HiSax> on how to configure it
314 using a different D-channel protocol, or non-standard IRQ/port
315 settings.
316
317config HISAX_HFC_PCI
318 bool "HFC PCI-Bus cards"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400319 depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700320 help
321 This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
322
Matt LaPlante09509602006-10-03 22:31:37 +0200323 For more information see under
Linus Torvalds1da177e2005-04-16 15:20:36 -0700324 <file:Documentation/isdn/README.hfc-pci>.
325
326config HISAX_W6692
327 bool "Winbond W6692 based cards"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400328 depends on PCI && PCI_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700329 help
330 This enables HiSax support for Winbond W6692 based PCI ISDN cards.
331
332 See <file:Documentation/isdn/README.HiSax> on how to configure it
333 using a different D-channel protocol, or non-standard IRQ/port
334 settings.
335
336config HISAX_HFC_SX
337 bool "HFC-S+, HFC-SP, HFC-PCMCIA cards"
338 help
339 This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
340 cards. This code is not finished yet.
341
Linus Torvalds1da177e2005-04-16 15:20:36 -0700342config HISAX_ENTERNOW_PCI
343 bool "Formula-n enter:now PCI card"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400344 depends on HISAX_NETJET && PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345 help
346 This enables HiSax support for the Formula-n enter:now PCI
347 ISDN card.
348
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349endif
350
351if ISDN_DRV_HISAX
352
353config HISAX_DEBUG
354 bool "HiSax debugging"
355 help
356 This enables debugging code in the new-style HiSax drivers, i.e.
357 the ST5481 USB driver currently.
358 If in doubt, say yes.
359
360comment "HiSax PCMCIA card service modules"
361
362config HISAX_SEDLBAUER_CS
363 tristate "Sedlbauer PCMCIA cards"
364 depends on PCMCIA && HISAX_SEDLBAUER
365 help
366 This enables the PCMCIA client driver for the Sedlbauer Speed Star
367 and Speed Star II cards.
368
369config HISAX_ELSA_CS
370 tristate "ELSA PCMCIA MicroLink cards"
371 depends on PCMCIA && HISAX_ELSA
372 help
373 This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
374 card.
375
376config HISAX_AVM_A1_CS
377 tristate "AVM A1 PCMCIA cards"
378 depends on PCMCIA && ISDN_DRV_HISAX
379 help
380 This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
381 PCMCIA cards.
382
383config HISAX_TELES_CS
384 tristate "TELES PCMCIA cards"
385 depends on PCMCIA && HISAX_16_3
386 help
387 This enables the PCMCIA client driver for the Teles PCMCIA cards.
388
389comment "HiSax sub driver modules"
390
391config HISAX_ST5481
392 tristate "ST5481 USB ISDN modem (EXPERIMENTAL)"
393 depends on USB && EXPERIMENTAL
Karsten Keilcb3824b2009-07-08 14:21:12 +0200394 select ISDN_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700395 select CRC_CCITT
Akinobu Mita60e657e2006-12-08 02:36:27 -0800396 select BITREVERSE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700397 help
398 This enables the driver for ST5481 based USB ISDN adapters,
399 e.g. the BeWan Gazel 128 USB
400
401config HISAX_HFCUSB
402 tristate "HFC USB based ISDN modems (EXPERIMENTAL)"
403 depends on USB && EXPERIMENTAL
404 help
405 This enables the driver for HFC USB based ISDN modems.
406
407config HISAX_HFC4S8S
408 tristate "HFC-4S/8S based ISDN cards (EXPERIMENTAL)"
409 depends on EXPERIMENTAL
410 help
411 This enables the driver for HFC-4S/8S based ISDN cards.
412
413config HISAX_FRITZ_PCIPNP
414 tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)"
Jeff Garzikbd3989e2007-10-29 09:48:09 -0400415 depends on PCI && PCI_LEGACY && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 help
417 This enables the driver for the AVM Fritz!Card PCI,
418 Fritz!Card PCI v2 and Fritz!Card PnP.
419 (the latter also needs you to select "ISA Plug and Play support"
420 from the menu "Plug and Play configuration")
421
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422config HISAX_AVM_A1_PCMCIA
423 bool
424 depends on HISAX_AVM_A1_CS
425 default y
426
427endif
428
429endmenu
430