blob: 4a0f86fa1e90566c03c693c413a581a80e40e7b6 [file] [log] [blame]
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001/*
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02002 * Driver for Atmel AT91 / AT32 Serial ports
Andrew Victor1e6c9c22006-01-10 16:59:27 +00003 * Copyright (C) 2003 Rick Bronson
4 *
5 * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
Chip Coldwella6670612008-02-08 04:21:06 -08008 * DMA support added by Chip Coldwell.
9 *
Andrew Victor1e6c9c22006-01-10 16:59:27 +000010 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 *
24 */
Andrew Victor1e6c9c22006-01-10 16:59:27 +000025#include <linux/module.h>
26#include <linux/tty.h>
27#include <linux/ioport.h>
28#include <linux/slab.h>
29#include <linux/init.h>
30#include <linux/serial.h>
Andrew Victorafefc412006-06-19 19:53:19 +010031#include <linux/clk.h>
Andrew Victor1e6c9c22006-01-10 16:59:27 +000032#include <linux/console.h>
33#include <linux/sysrq.h>
34#include <linux/tty_flip.h>
Andrew Victorafefc412006-06-19 19:53:19 +010035#include <linux/platform_device.h>
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +020036#include <linux/of.h>
37#include <linux/of_device.h>
Chip Coldwella6670612008-02-08 04:21:06 -080038#include <linux/dma-mapping.h>
Andrew Victor93a3ddc2007-02-08 11:31:22 +010039#include <linux/atmel_pdc.h>
Guennadi Liakhovetskifa3218d2008-01-29 15:43:13 +010040#include <linux/atmel_serial.h>
Claudio Scordinoe8faff72010-05-03 13:31:28 +010041#include <linux/uaccess.h>
Andrew Victor1e6c9c22006-01-10 16:59:27 +000042
43#include <asm/io.h>
Peter Huewef7512e72010-06-29 19:35:39 +020044#include <asm/ioctls.h>
Andrew Victor1e6c9c22006-01-10 16:59:27 +000045
Andrew Victorafefc412006-06-19 19:53:19 +010046#include <asm/mach/serial_at91.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010047#include <mach/board.h>
Andrew Victor93a3ddc2007-02-08 11:31:22 +010048
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +020049#ifdef CONFIG_ARM
Russell Kinga09e64f2008-08-05 16:14:15 +010050#include <mach/cpu.h>
Russell King60e89722011-07-26 10:56:19 +010051#include <asm/gpio.h>
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +020052#endif
Andrew Victor1e6c9c22006-01-10 16:59:27 +000053
Chip Coldwella6670612008-02-08 04:21:06 -080054#define PDC_BUFFER_SIZE 512
55/* Revisit: We should calculate this based on the actual port settings */
56#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
57
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +020058#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
Andrew Victor1e6c9c22006-01-10 16:59:27 +000059#define SUPPORT_SYSRQ
60#endif
61
62#include <linux/serial_core.h>
63
Claudio Scordinoe8faff72010-05-03 13:31:28 +010064static void atmel_start_rx(struct uart_port *port);
65static void atmel_stop_rx(struct uart_port *port);
66
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +020067#ifdef CONFIG_SERIAL_ATMEL_TTYAT
Andrew Victor1e6c9c22006-01-10 16:59:27 +000068
69/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
70 * should coexist with the 8250 driver, such as if we have an external 16C550
71 * UART. */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +020072#define SERIAL_ATMEL_MAJOR 204
Andrew Victor1e6c9c22006-01-10 16:59:27 +000073#define MINOR_START 154
Haavard Skinnemoen7192f922006-10-04 16:02:05 +020074#define ATMEL_DEVICENAME "ttyAT"
Andrew Victor1e6c9c22006-01-10 16:59:27 +000075
76#else
77
78/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port
79 * name, but it is legally reserved for the 8250 driver. */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +020080#define SERIAL_ATMEL_MAJOR TTY_MAJOR
Andrew Victor1e6c9c22006-01-10 16:59:27 +000081#define MINOR_START 64
Haavard Skinnemoen7192f922006-10-04 16:02:05 +020082#define ATMEL_DEVICENAME "ttyS"
Andrew Victor1e6c9c22006-01-10 16:59:27 +000083
84#endif
85
Haavard Skinnemoen7192f922006-10-04 16:02:05 +020086#define ATMEL_ISR_PASS_LIMIT 256
Andrew Victor1e6c9c22006-01-10 16:59:27 +000087
Remy Bohmerb843aa22008-02-08 04:21:01 -080088/* UART registers. CR is write-only, hence no GET macro */
Haavard Skinnemoen544fc722007-02-12 00:52:15 -080089#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
90#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
91#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
92#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
93#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
94#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
95#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
96#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
97#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
98#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
99#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
100#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100101#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000102
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000103 /* PDC registers */
Haavard Skinnemoen544fc722007-02-12 00:52:15 -0800104#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
105#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
Andrew Victorafefc412006-06-19 19:53:19 +0100106
Haavard Skinnemoen544fc722007-02-12 00:52:15 -0800107#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
108#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
109#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
110#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
111#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000112
Haavard Skinnemoen544fc722007-02-12 00:52:15 -0800113#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
114#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
Marc Pignat39d4c922008-04-02 13:04:42 -0700115#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000116
Haavard Skinnemoen71f2e2b2006-10-04 16:02:07 +0200117static int (*atmel_open_hook)(struct uart_port *);
118static void (*atmel_close_hook)(struct uart_port *);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000119
Chip Coldwella6670612008-02-08 04:21:06 -0800120struct atmel_dma_buffer {
121 unsigned char *buf;
122 dma_addr_t dma_addr;
123 unsigned int dma_size;
124 unsigned int ofs;
125};
126
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800127struct atmel_uart_char {
128 u16 status;
129 u16 ch;
130};
131
132#define ATMEL_SERIAL_RINGSIZE 1024
133
Andrew Victorafefc412006-06-19 19:53:19 +0100134/*
135 * We wrap our port structure around the generic uart_port.
136 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200137struct atmel_uart_port {
Andrew Victorafefc412006-06-19 19:53:19 +0100138 struct uart_port uart; /* uart */
139 struct clk *clk; /* uart clock */
Anti Sullinf05596d2008-09-22 13:57:54 -0700140 int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */
141 u32 backup_imr; /* IMR saved during suspend */
Haavard Skinnemoen9e6077b2007-07-15 23:40:36 -0700142 int break_active; /* break being received */
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800143
Chip Coldwella6670612008-02-08 04:21:06 -0800144 short use_dma_rx; /* enable PDC receiver */
145 short pdc_rx_idx; /* current PDC RX buffer */
146 struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
147
148 short use_dma_tx; /* enable PDC transmitter */
149 struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
150
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800151 struct tasklet_struct tasklet;
152 unsigned int irq_status;
153 unsigned int irq_status_prev;
154
155 struct circ_buf rx_ring;
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100156
157 struct serial_rs485 rs485; /* rs485 settings */
158 unsigned int tx_done_mask;
Andrew Victorafefc412006-06-19 19:53:19 +0100159};
160
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200161static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +0200162static unsigned long atmel_ports_in_use;
Andrew Victorafefc412006-06-19 19:53:19 +0100163
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000164#ifdef SUPPORT_SYSRQ
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200165static struct console atmel_console;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000166#endif
167
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +0200168#if defined(CONFIG_OF)
169static const struct of_device_id atmel_serial_dt_ids[] = {
170 { .compatible = "atmel,at91rm9200-usart" },
171 { .compatible = "atmel,at91sam9260-usart" },
172 { /* sentinel */ }
173};
174
175MODULE_DEVICE_TABLE(of, atmel_serial_dt_ids);
176#endif
177
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800178static inline struct atmel_uart_port *
179to_atmel_uart_port(struct uart_port *uart)
180{
181 return container_of(uart, struct atmel_uart_port, uart);
182}
183
Chip Coldwella6670612008-02-08 04:21:06 -0800184#ifdef CONFIG_SERIAL_ATMEL_PDC
185static bool atmel_use_dma_rx(struct uart_port *port)
186{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800187 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Chip Coldwella6670612008-02-08 04:21:06 -0800188
189 return atmel_port->use_dma_rx;
190}
191
192static bool atmel_use_dma_tx(struct uart_port *port)
193{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800194 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Chip Coldwella6670612008-02-08 04:21:06 -0800195
196 return atmel_port->use_dma_tx;
197}
198#else
199static bool atmel_use_dma_rx(struct uart_port *port)
200{
201 return false;
202}
203
204static bool atmel_use_dma_tx(struct uart_port *port)
205{
206 return false;
207}
208#endif
209
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100210/* Enable or disable the rs485 support */
211void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
212{
213 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
214 unsigned int mode;
215
216 spin_lock(&port->lock);
217
218 /* Disable interrupts */
219 UART_PUT_IDR(port, atmel_port->tx_done_mask);
220
221 mode = UART_GET_MR(port);
222
223 /* Resetting serial mode to RS232 (0x0) */
224 mode &= ~ATMEL_US_USMODE;
225
226 atmel_port->rs485 = *rs485conf;
227
228 if (rs485conf->flags & SER_RS485_ENABLED) {
229 dev_dbg(port->dev, "Setting UART to RS485\n");
230 atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
Claudio Scordino1b633182010-07-20 15:26:47 -0700231 if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
232 UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100233 mode |= ATMEL_US_USMODE_RS485;
234 } else {
235 dev_dbg(port->dev, "Setting UART to RS232\n");
236 if (atmel_use_dma_tx(port))
237 atmel_port->tx_done_mask = ATMEL_US_ENDTX |
238 ATMEL_US_TXBUFE;
239 else
240 atmel_port->tx_done_mask = ATMEL_US_TXRDY;
241 }
242 UART_PUT_MR(port, mode);
243
244 /* Enable interrupts */
245 UART_PUT_IER(port, atmel_port->tx_done_mask);
246
247 spin_unlock(&port->lock);
248
249}
250
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000251/*
252 * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
253 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200254static u_int atmel_tx_empty(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000255{
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200256 return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000257}
258
259/*
260 * Set state of the modem control output lines
261 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200262static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000263{
264 unsigned int control = 0;
Andrew Victorafefc412006-06-19 19:53:19 +0100265 unsigned int mode;
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100266 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000267
Andrew Victorc2f5ccf2006-12-04 09:37:20 +0100268#ifdef CONFIG_ARCH_AT91RM9200
Andrew Victor79da7a62006-11-30 11:58:14 +0100269 if (cpu_is_at91rm9200()) {
Andrew Victorafefc412006-06-19 19:53:19 +0100270 /*
Remy Bohmerb843aa22008-02-08 04:21:01 -0800271 * AT91RM9200 Errata #39: RTS0 is not internally connected
272 * to PA21. We need to drive the pin manually.
Andrew Victorafefc412006-06-19 19:53:19 +0100273 */
Andrew Victor72729912006-09-27 09:44:11 +0100274 if (port->mapbase == AT91RM9200_BASE_US0) {
Andrew Victorafefc412006-06-19 19:53:19 +0100275 if (mctrl & TIOCM_RTS)
Andrew Victor20e65272006-07-05 14:31:13 +0100276 at91_set_gpio_value(AT91_PIN_PA21, 0);
Andrew Victorafefc412006-06-19 19:53:19 +0100277 else
Andrew Victor20e65272006-07-05 14:31:13 +0100278 at91_set_gpio_value(AT91_PIN_PA21, 1);
Andrew Victorafefc412006-06-19 19:53:19 +0100279 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000280 }
Haavard Skinnemoenacca9b82006-10-04 16:02:09 +0200281#endif
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000282
283 if (mctrl & TIOCM_RTS)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200284 control |= ATMEL_US_RTSEN;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000285 else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200286 control |= ATMEL_US_RTSDIS;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000287
288 if (mctrl & TIOCM_DTR)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200289 control |= ATMEL_US_DTREN;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000290 else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200291 control |= ATMEL_US_DTRDIS;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000292
Andrew Victorafefc412006-06-19 19:53:19 +0100293 UART_PUT_CR(port, control);
294
295 /* Local loopback mode? */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200296 mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
Andrew Victorafefc412006-06-19 19:53:19 +0100297 if (mctrl & TIOCM_LOOP)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200298 mode |= ATMEL_US_CHMODE_LOC_LOOP;
Andrew Victorafefc412006-06-19 19:53:19 +0100299 else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200300 mode |= ATMEL_US_CHMODE_NORMAL;
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100301
302 /* Resetting serial mode to RS232 (0x0) */
303 mode &= ~ATMEL_US_USMODE;
304
305 if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
306 dev_dbg(port->dev, "Setting UART to RS485\n");
Claudio Scordino1b633182010-07-20 15:26:47 -0700307 if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
308 UART_PUT_TTGR(port,
309 atmel_port->rs485.delay_rts_after_send);
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100310 mode |= ATMEL_US_USMODE_RS485;
311 } else {
312 dev_dbg(port->dev, "Setting UART to RS232\n");
313 }
Andrew Victorafefc412006-06-19 19:53:19 +0100314 UART_PUT_MR(port, mode);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000315}
316
317/*
318 * Get state of the modem control input lines
319 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200320static u_int atmel_get_mctrl(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000321{
322 unsigned int status, ret = 0;
323
324 status = UART_GET_CSR(port);
325
326 /*
327 * The control signals are active low.
328 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200329 if (!(status & ATMEL_US_DCD))
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000330 ret |= TIOCM_CD;
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200331 if (!(status & ATMEL_US_CTS))
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000332 ret |= TIOCM_CTS;
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200333 if (!(status & ATMEL_US_DSR))
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000334 ret |= TIOCM_DSR;
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200335 if (!(status & ATMEL_US_RI))
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000336 ret |= TIOCM_RI;
337
338 return ret;
339}
340
341/*
342 * Stop transmitting.
343 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200344static void atmel_stop_tx(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000345{
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100346 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
347
Chip Coldwella6670612008-02-08 04:21:06 -0800348 if (atmel_use_dma_tx(port)) {
349 /* disable PDC transmit */
350 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100351 }
352 /* Disable interrupts */
353 UART_PUT_IDR(port, atmel_port->tx_done_mask);
354
Bernhard Roth83cac9f2011-08-24 09:48:23 +0200355 if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
356 !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100357 atmel_start_rx(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000358}
359
360/*
361 * Start transmitting.
362 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200363static void atmel_start_tx(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000364{
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100365 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
366
Chip Coldwella6670612008-02-08 04:21:06 -0800367 if (atmel_use_dma_tx(port)) {
368 if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
369 /* The transmitter is already running. Yes, we
370 really need this.*/
371 return;
372
Bernhard Roth83cac9f2011-08-24 09:48:23 +0200373 if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
374 !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100375 atmel_stop_rx(port);
376
Chip Coldwella6670612008-02-08 04:21:06 -0800377 /* re-enable PDC transmit */
378 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100379 }
380 /* Enable interrupts */
381 UART_PUT_IER(port, atmel_port->tx_done_mask);
382}
383
384/*
385 * start receiving - port is in process of being opened.
386 */
387static void atmel_start_rx(struct uart_port *port)
388{
389 UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
390
391 if (atmel_use_dma_rx(port)) {
392 /* enable PDC controller */
393 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
394 port->read_status_mask);
395 UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
396 } else {
397 UART_PUT_IER(port, ATMEL_US_RXRDY);
398 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000399}
400
401/*
402 * Stop receiving - port is in process of being closed.
403 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200404static void atmel_stop_rx(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000405{
Chip Coldwella6670612008-02-08 04:21:06 -0800406 if (atmel_use_dma_rx(port)) {
407 /* disable PDC receive */
408 UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100409 UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
410 port->read_status_mask);
411 } else {
Chip Coldwella6670612008-02-08 04:21:06 -0800412 UART_PUT_IDR(port, ATMEL_US_RXRDY);
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100413 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000414}
415
416/*
417 * Enable modem status interrupts
418 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200419static void atmel_enable_ms(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000420{
Remy Bohmerb843aa22008-02-08 04:21:01 -0800421 UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
422 | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000423}
424
425/*
426 * Control the transmission of a break signal
427 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200428static void atmel_break_ctl(struct uart_port *port, int break_state)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000429{
430 if (break_state != 0)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200431 UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000432 else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200433 UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000434}
435
436/*
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800437 * Stores the incoming character in the ring buffer
438 */
439static void
440atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
441 unsigned int ch)
442{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800443 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800444 struct circ_buf *ring = &atmel_port->rx_ring;
445 struct atmel_uart_char *c;
446
447 if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
448 /* Buffer overflow, ignore char */
449 return;
450
451 c = &((struct atmel_uart_char *)ring->buf)[ring->head];
452 c->status = status;
453 c->ch = ch;
454
455 /* Make sure the character is stored before we update head. */
456 smp_wmb();
457
458 ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
459}
460
461/*
Chip Coldwella6670612008-02-08 04:21:06 -0800462 * Deal with parity, framing and overrun errors.
463 */
464static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
465{
466 /* clear error */
467 UART_PUT_CR(port, ATMEL_US_RSTSTA);
468
469 if (status & ATMEL_US_RXBRK) {
470 /* ignore side-effect */
471 status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
472 port->icount.brk++;
473 }
474 if (status & ATMEL_US_PARE)
475 port->icount.parity++;
476 if (status & ATMEL_US_FRAME)
477 port->icount.frame++;
478 if (status & ATMEL_US_OVRE)
479 port->icount.overrun++;
480}
481
482/*
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000483 * Characters received (called from interrupt handler)
484 */
David Howells7d12e782006-10-05 14:55:46 +0100485static void atmel_rx_chars(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000486{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800487 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800488 unsigned int status, ch;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000489
Andrew Victorafefc412006-06-19 19:53:19 +0100490 status = UART_GET_CSR(port);
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200491 while (status & ATMEL_US_RXRDY) {
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000492 ch = UART_GET_CHAR(port);
493
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000494 /*
495 * note that the error handling code is
496 * out of the main execution path
497 */
Haavard Skinnemoen9e6077b2007-07-15 23:40:36 -0700498 if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
499 | ATMEL_US_OVRE | ATMEL_US_RXBRK)
500 || atmel_port->break_active)) {
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800501
Remy Bohmerb843aa22008-02-08 04:21:01 -0800502 /* clear error */
503 UART_PUT_CR(port, ATMEL_US_RSTSTA);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800504
Haavard Skinnemoen9e6077b2007-07-15 23:40:36 -0700505 if (status & ATMEL_US_RXBRK
506 && !atmel_port->break_active) {
Haavard Skinnemoen9e6077b2007-07-15 23:40:36 -0700507 atmel_port->break_active = 1;
508 UART_PUT_IER(port, ATMEL_US_RXBRK);
Haavard Skinnemoen9e6077b2007-07-15 23:40:36 -0700509 } else {
510 /*
511 * This is either the end-of-break
512 * condition or we've received at
513 * least one character without RXBRK
514 * being set. In both cases, the next
515 * RXBRK will indicate start-of-break.
516 */
517 UART_PUT_IDR(port, ATMEL_US_RXBRK);
518 status &= ~ATMEL_US_RXBRK;
519 atmel_port->break_active = 0;
Andrew Victorafefc412006-06-19 19:53:19 +0100520 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000521 }
522
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800523 atmel_buffer_rx_char(port, status, ch);
Andrew Victorafefc412006-06-19 19:53:19 +0100524 status = UART_GET_CSR(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000525 }
526
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800527 tasklet_schedule(&atmel_port->tasklet);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000528}
529
530/*
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800531 * Transmit characters (called from tasklet with TXRDY interrupt
532 * disabled)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000533 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200534static void atmel_tx_chars(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000535{
Alan Coxebd2c8f2009-09-19 13:13:28 -0700536 struct circ_buf *xmit = &port->state->xmit;
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100537 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000538
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100539 if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000540 UART_PUT_CHAR(port, port->x_char);
541 port->icount.tx++;
542 port->x_char = 0;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000543 }
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800544 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000545 return;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000546
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100547 while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000548 UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
549 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
550 port->icount.tx++;
551 if (uart_circ_empty(xmit))
552 break;
553 }
554
555 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
556 uart_write_wakeup(port);
557
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800558 if (!uart_circ_empty(xmit))
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100559 /* Enable interrupts */
560 UART_PUT_IER(port, atmel_port->tx_done_mask);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000561}
562
563/*
Remy Bohmerb843aa22008-02-08 04:21:01 -0800564 * receive interrupt handler.
565 */
566static void
567atmel_handle_receive(struct uart_port *port, unsigned int pending)
568{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800569 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Remy Bohmerb843aa22008-02-08 04:21:01 -0800570
Chip Coldwella6670612008-02-08 04:21:06 -0800571 if (atmel_use_dma_rx(port)) {
572 /*
573 * PDC receive. Just schedule the tasklet and let it
574 * figure out the details.
575 *
576 * TODO: We're not handling error flags correctly at
577 * the moment.
578 */
579 if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
580 UART_PUT_IDR(port, (ATMEL_US_ENDRX
581 | ATMEL_US_TIMEOUT));
582 tasklet_schedule(&atmel_port->tasklet);
583 }
584
585 if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
586 ATMEL_US_FRAME | ATMEL_US_PARE))
587 atmel_pdc_rxerr(port, pending);
588 }
589
Remy Bohmerb843aa22008-02-08 04:21:01 -0800590 /* Interrupt receive */
591 if (pending & ATMEL_US_RXRDY)
592 atmel_rx_chars(port);
593 else if (pending & ATMEL_US_RXBRK) {
594 /*
595 * End of break detected. If it came along with a
596 * character, atmel_rx_chars will handle it.
597 */
598 UART_PUT_CR(port, ATMEL_US_RSTSTA);
599 UART_PUT_IDR(port, ATMEL_US_RXBRK);
600 atmel_port->break_active = 0;
601 }
602}
603
604/*
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800605 * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
Remy Bohmerb843aa22008-02-08 04:21:01 -0800606 */
607static void
608atmel_handle_transmit(struct uart_port *port, unsigned int pending)
609{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800610 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800611
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100612 if (pending & atmel_port->tx_done_mask) {
613 /* Either PDC or interrupt transmission */
614 UART_PUT_IDR(port, atmel_port->tx_done_mask);
615 tasklet_schedule(&atmel_port->tasklet);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800616 }
Remy Bohmerb843aa22008-02-08 04:21:01 -0800617}
618
619/*
620 * status flags interrupt handler.
621 */
622static void
623atmel_handle_status(struct uart_port *port, unsigned int pending,
624 unsigned int status)
625{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800626 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800627
Remy Bohmerb843aa22008-02-08 04:21:01 -0800628 if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800629 | ATMEL_US_CTSIC)) {
630 atmel_port->irq_status = status;
631 tasklet_schedule(&atmel_port->tasklet);
632 }
Remy Bohmerb843aa22008-02-08 04:21:01 -0800633}
634
635/*
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000636 * Interrupt handler
637 */
David Howells7d12e782006-10-05 14:55:46 +0100638static irqreturn_t atmel_interrupt(int irq, void *dev_id)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000639{
640 struct uart_port *port = dev_id;
641 unsigned int status, pending, pass_counter = 0;
642
Chip Coldwella6670612008-02-08 04:21:06 -0800643 do {
644 status = UART_GET_CSR(port);
645 pending = status & UART_GET_IMR(port);
646 if (!pending)
647 break;
648
Remy Bohmerb843aa22008-02-08 04:21:01 -0800649 atmel_handle_receive(port, pending);
650 atmel_handle_status(port, pending, status);
651 atmel_handle_transmit(port, pending);
Chip Coldwella6670612008-02-08 04:21:06 -0800652 } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000653
Haavard Skinnemoen0400b692008-02-23 15:23:36 -0800654 return pass_counter ? IRQ_HANDLED : IRQ_NONE;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000655}
656
Chip Coldwella6670612008-02-08 04:21:06 -0800657/*
658 * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
659 */
660static void atmel_tx_dma(struct uart_port *port)
661{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800662 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Alan Coxebd2c8f2009-09-19 13:13:28 -0700663 struct circ_buf *xmit = &port->state->xmit;
Chip Coldwella6670612008-02-08 04:21:06 -0800664 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
665 int count;
666
Michael Trimarchiba0657f2008-04-02 13:04:41 -0700667 /* nothing left to transmit? */
668 if (UART_GET_TCR(port))
669 return;
670
Chip Coldwella6670612008-02-08 04:21:06 -0800671 xmit->tail += pdc->ofs;
672 xmit->tail &= UART_XMIT_SIZE - 1;
673
674 port->icount.tx += pdc->ofs;
675 pdc->ofs = 0;
676
Michael Trimarchiba0657f2008-04-02 13:04:41 -0700677 /* more to transmit - setup next transfer */
Chip Coldwella6670612008-02-08 04:21:06 -0800678
Michael Trimarchiba0657f2008-04-02 13:04:41 -0700679 /* disable PDC transmit */
680 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
681
Itai Levi1f140812009-01-15 13:50:43 -0800682 if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
Chip Coldwella6670612008-02-08 04:21:06 -0800683 dma_sync_single_for_device(port->dev,
684 pdc->dma_addr,
685 pdc->dma_size,
686 DMA_TO_DEVICE);
687
688 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
689 pdc->ofs = count;
690
691 UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
692 UART_PUT_TCR(port, count);
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100693 /* re-enable PDC transmit */
Chip Coldwella6670612008-02-08 04:21:06 -0800694 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100695 /* Enable interrupts */
696 UART_PUT_IER(port, atmel_port->tx_done_mask);
697 } else {
Bernhard Roth83cac9f2011-08-24 09:48:23 +0200698 if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
699 !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX)) {
Claudio Scordinoe8faff72010-05-03 13:31:28 +0100700 /* DMA done, stop TX, start RX for RS485 */
701 atmel_start_rx(port);
702 }
Chip Coldwella6670612008-02-08 04:21:06 -0800703 }
704
705 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
706 uart_write_wakeup(port);
707}
708
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800709static void atmel_rx_from_ring(struct uart_port *port)
710{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800711 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800712 struct circ_buf *ring = &atmel_port->rx_ring;
713 unsigned int flg;
714 unsigned int status;
715
716 while (ring->head != ring->tail) {
717 struct atmel_uart_char c;
718
719 /* Make sure c is loaded after head. */
720 smp_rmb();
721
722 c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
723
724 ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
725
726 port->icount.rx++;
727 status = c.status;
728 flg = TTY_NORMAL;
729
730 /*
731 * note that the error handling code is
732 * out of the main execution path
733 */
734 if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
735 | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
736 if (status & ATMEL_US_RXBRK) {
737 /* ignore side-effect */
738 status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
739
740 port->icount.brk++;
741 if (uart_handle_break(port))
742 continue;
743 }
744 if (status & ATMEL_US_PARE)
745 port->icount.parity++;
746 if (status & ATMEL_US_FRAME)
747 port->icount.frame++;
748 if (status & ATMEL_US_OVRE)
749 port->icount.overrun++;
750
751 status &= port->read_status_mask;
752
753 if (status & ATMEL_US_RXBRK)
754 flg = TTY_BREAK;
755 else if (status & ATMEL_US_PARE)
756 flg = TTY_PARITY;
757 else if (status & ATMEL_US_FRAME)
758 flg = TTY_FRAME;
759 }
760
761
762 if (uart_handle_sysrq_char(port, c.ch))
763 continue;
764
765 uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
766 }
767
768 /*
769 * Drop the lock here since it might end up calling
770 * uart_start(), which takes the lock.
771 */
772 spin_unlock(&port->lock);
Alan Coxebd2c8f2009-09-19 13:13:28 -0700773 tty_flip_buffer_push(port->state->port.tty);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800774 spin_lock(&port->lock);
775}
776
Chip Coldwella6670612008-02-08 04:21:06 -0800777static void atmel_rx_from_dma(struct uart_port *port)
778{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800779 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Alan Coxebd2c8f2009-09-19 13:13:28 -0700780 struct tty_struct *tty = port->state->port.tty;
Chip Coldwella6670612008-02-08 04:21:06 -0800781 struct atmel_dma_buffer *pdc;
782 int rx_idx = atmel_port->pdc_rx_idx;
783 unsigned int head;
784 unsigned int tail;
785 unsigned int count;
786
787 do {
788 /* Reset the UART timeout early so that we don't miss one */
789 UART_PUT_CR(port, ATMEL_US_STTTO);
790
791 pdc = &atmel_port->pdc_rx[rx_idx];
792 head = UART_GET_RPR(port) - pdc->dma_addr;
793 tail = pdc->ofs;
794
795 /* If the PDC has switched buffers, RPR won't contain
796 * any address within the current buffer. Since head
797 * is unsigned, we just need a one-way comparison to
798 * find out.
799 *
800 * In this case, we just need to consume the entire
801 * buffer and resubmit it for DMA. This will clear the
802 * ENDRX bit as well, so that we can safely re-enable
803 * all interrupts below.
804 */
805 head = min(head, pdc->dma_size);
806
807 if (likely(head != tail)) {
808 dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
809 pdc->dma_size, DMA_FROM_DEVICE);
810
811 /*
812 * head will only wrap around when we recycle
813 * the DMA buffer, and when that happens, we
814 * explicitly set tail to 0. So head will
815 * always be greater than tail.
816 */
817 count = head - tail;
818
819 tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
820
821 dma_sync_single_for_device(port->dev, pdc->dma_addr,
822 pdc->dma_size, DMA_FROM_DEVICE);
823
824 port->icount.rx += count;
825 pdc->ofs = head;
826 }
827
828 /*
829 * If the current buffer is full, we need to check if
830 * the next one contains any additional data.
831 */
832 if (head >= pdc->dma_size) {
833 pdc->ofs = 0;
834 UART_PUT_RNPR(port, pdc->dma_addr);
835 UART_PUT_RNCR(port, pdc->dma_size);
836
837 rx_idx = !rx_idx;
838 atmel_port->pdc_rx_idx = rx_idx;
839 }
840 } while (head >= pdc->dma_size);
841
842 /*
843 * Drop the lock here since it might end up calling
844 * uart_start(), which takes the lock.
845 */
846 spin_unlock(&port->lock);
847 tty_flip_buffer_push(tty);
848 spin_lock(&port->lock);
849
850 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
851}
852
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800853/*
854 * tasklet handling tty stuff outside the interrupt handler.
855 */
856static void atmel_tasklet_func(unsigned long data)
857{
858 struct uart_port *port = (struct uart_port *)data;
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800859 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800860 unsigned int status;
861 unsigned int status_change;
862
863 /* The interrupt handler does not take the lock */
864 spin_lock(&port->lock);
865
Chip Coldwella6670612008-02-08 04:21:06 -0800866 if (atmel_use_dma_tx(port))
867 atmel_tx_dma(port);
868 else
869 atmel_tx_chars(port);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800870
871 status = atmel_port->irq_status;
872 status_change = status ^ atmel_port->irq_status_prev;
873
874 if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
875 | ATMEL_US_DCD | ATMEL_US_CTS)) {
876 /* TODO: All reads to CSR will clear these interrupts! */
877 if (status_change & ATMEL_US_RI)
878 port->icount.rng++;
879 if (status_change & ATMEL_US_DSR)
880 port->icount.dsr++;
881 if (status_change & ATMEL_US_DCD)
882 uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
883 if (status_change & ATMEL_US_CTS)
884 uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
885
Alan Coxbdc04e32009-09-19 13:13:31 -0700886 wake_up_interruptible(&port->state->port.delta_msr_wait);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800887
888 atmel_port->irq_status_prev = status;
889 }
890
Chip Coldwella6670612008-02-08 04:21:06 -0800891 if (atmel_use_dma_rx(port))
892 atmel_rx_from_dma(port);
893 else
894 atmel_rx_from_ring(port);
Remy Bohmer1ecc26b2008-02-08 04:21:05 -0800895
896 spin_unlock(&port->lock);
897}
898
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000899/*
900 * Perform initialization and enable port for reception
901 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200902static int atmel_startup(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000903{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -0800904 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Alan Coxebd2c8f2009-09-19 13:13:28 -0700905 struct tty_struct *tty = port->state->port.tty;
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000906 int retval;
907
908 /*
909 * Ensure that no interrupts are enabled otherwise when
910 * request_irq() is called we could get stuck trying to
911 * handle an unexpected interrupt
912 */
913 UART_PUT_IDR(port, -1);
914
915 /*
916 * Allocate the IRQ
917 */
Remy Bohmerb843aa22008-02-08 04:21:01 -0800918 retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
Haavard Skinnemoenae161062008-02-08 04:21:08 -0800919 tty ? tty->name : "atmel_serial", port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000920 if (retval) {
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200921 printk("atmel_serial: atmel_startup - Can't get irq\n");
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000922 return retval;
923 }
924
925 /*
Chip Coldwella6670612008-02-08 04:21:06 -0800926 * Initialize DMA (if necessary)
927 */
928 if (atmel_use_dma_rx(port)) {
929 int i;
930
931 for (i = 0; i < 2; i++) {
932 struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
933
934 pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
935 if (pdc->buf == NULL) {
936 if (i != 0) {
937 dma_unmap_single(port->dev,
938 atmel_port->pdc_rx[0].dma_addr,
939 PDC_BUFFER_SIZE,
940 DMA_FROM_DEVICE);
941 kfree(atmel_port->pdc_rx[0].buf);
942 }
943 free_irq(port->irq, port);
944 return -ENOMEM;
945 }
946 pdc->dma_addr = dma_map_single(port->dev,
947 pdc->buf,
948 PDC_BUFFER_SIZE,
949 DMA_FROM_DEVICE);
950 pdc->dma_size = PDC_BUFFER_SIZE;
951 pdc->ofs = 0;
952 }
953
954 atmel_port->pdc_rx_idx = 0;
955
956 UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
957 UART_PUT_RCR(port, PDC_BUFFER_SIZE);
958
959 UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
960 UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
961 }
962 if (atmel_use_dma_tx(port)) {
963 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
Alan Coxebd2c8f2009-09-19 13:13:28 -0700964 struct circ_buf *xmit = &port->state->xmit;
Chip Coldwella6670612008-02-08 04:21:06 -0800965
966 pdc->buf = xmit->buf;
967 pdc->dma_addr = dma_map_single(port->dev,
968 pdc->buf,
969 UART_XMIT_SIZE,
970 DMA_TO_DEVICE);
971 pdc->dma_size = UART_XMIT_SIZE;
972 pdc->ofs = 0;
973 }
974
975 /*
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000976 * If there is a specific "open" function (to register
977 * control line interrupts)
978 */
Haavard Skinnemoen71f2e2b2006-10-04 16:02:07 +0200979 if (atmel_open_hook) {
980 retval = atmel_open_hook(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000981 if (retval) {
982 free_irq(port->irq, port);
983 return retval;
984 }
985 }
986
Atsushi Nemoto27c0c8e2009-02-18 14:48:28 -0800987 /* Save current CSR for comparison in atmel_tasklet_func() */
988 atmel_port->irq_status_prev = UART_GET_CSR(port);
989 atmel_port->irq_status = atmel_port->irq_status_prev;
990
Andrew Victor1e6c9c22006-01-10 16:59:27 +0000991 /*
992 * Finally, enable the serial port
993 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +0200994 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
Remy Bohmerb843aa22008-02-08 04:21:01 -0800995 /* enable xmit & rcvr */
996 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
Andrew Victorafefc412006-06-19 19:53:19 +0100997
Chip Coldwella6670612008-02-08 04:21:06 -0800998 if (atmel_use_dma_rx(port)) {
999 /* set UART timeout */
1000 UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
1001 UART_PUT_CR(port, ATMEL_US_STTTO);
1002
1003 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
1004 /* enable PDC controller */
1005 UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
1006 } else {
1007 /* enable receive only */
1008 UART_PUT_IER(port, ATMEL_US_RXRDY);
1009 }
Andrew Victorafefc412006-06-19 19:53:19 +01001010
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001011 return 0;
1012}
1013
1014/*
1015 * Disable the port
1016 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001017static void atmel_shutdown(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001018{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -08001019 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Chip Coldwella6670612008-02-08 04:21:06 -08001020 /*
1021 * Ensure everything is stopped.
1022 */
1023 atmel_stop_rx(port);
1024 atmel_stop_tx(port);
1025
1026 /*
1027 * Shut-down the DMA.
1028 */
1029 if (atmel_use_dma_rx(port)) {
1030 int i;
1031
1032 for (i = 0; i < 2; i++) {
1033 struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
1034
1035 dma_unmap_single(port->dev,
1036 pdc->dma_addr,
1037 pdc->dma_size,
1038 DMA_FROM_DEVICE);
1039 kfree(pdc->buf);
1040 }
1041 }
1042 if (atmel_use_dma_tx(port)) {
1043 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
1044
1045 dma_unmap_single(port->dev,
1046 pdc->dma_addr,
1047 pdc->dma_size,
1048 DMA_TO_DEVICE);
1049 }
1050
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001051 /*
1052 * Disable all interrupts, port and break condition.
1053 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001054 UART_PUT_CR(port, ATMEL_US_RSTSTA);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001055 UART_PUT_IDR(port, -1);
1056
1057 /*
1058 * Free the interrupt
1059 */
1060 free_irq(port->irq, port);
1061
1062 /*
1063 * If there is a specific "close" function (to unregister
1064 * control line interrupts)
1065 */
Haavard Skinnemoen71f2e2b2006-10-04 16:02:07 +02001066 if (atmel_close_hook)
1067 atmel_close_hook(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001068}
1069
1070/*
Haavard Skinnemoen9afd5612008-07-16 21:52:46 +01001071 * Flush any TX data submitted for DMA. Called when the TX circular
1072 * buffer is reset.
1073 */
1074static void atmel_flush_buffer(struct uart_port *port)
1075{
1076 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1077
1078 if (atmel_use_dma_tx(port)) {
1079 UART_PUT_TCR(port, 0);
1080 atmel_port->pdc_tx.ofs = 0;
1081 }
1082}
1083
1084/*
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001085 * Power / Clock management.
1086 */
Remy Bohmerb843aa22008-02-08 04:21:01 -08001087static void atmel_serial_pm(struct uart_port *port, unsigned int state,
1088 unsigned int oldstate)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001089{
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -08001090 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Andrew Victorafefc412006-06-19 19:53:19 +01001091
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001092 switch (state) {
Remy Bohmerb843aa22008-02-08 04:21:01 -08001093 case 0:
1094 /*
1095 * Enable the peripheral clock for this serial port.
1096 * This is called on uart_open() or a resume event.
1097 */
1098 clk_enable(atmel_port->clk);
Anti Sullinf05596d2008-09-22 13:57:54 -07001099
1100 /* re-enable interrupts if we disabled some on suspend */
1101 UART_PUT_IER(port, atmel_port->backup_imr);
Remy Bohmerb843aa22008-02-08 04:21:01 -08001102 break;
1103 case 3:
Anti Sullinf05596d2008-09-22 13:57:54 -07001104 /* Back up the interrupt mask and disable all interrupts */
1105 atmel_port->backup_imr = UART_GET_IMR(port);
1106 UART_PUT_IDR(port, -1);
1107
Remy Bohmerb843aa22008-02-08 04:21:01 -08001108 /*
1109 * Disable the peripheral clock for this serial port.
1110 * This is called on uart_close() or a suspend event.
1111 */
1112 clk_disable(atmel_port->clk);
1113 break;
1114 default:
1115 printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001116 }
1117}
1118
1119/*
1120 * Change the port parameters
1121 */
Remy Bohmerb843aa22008-02-08 04:21:01 -08001122static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
1123 struct ktermios *old)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001124{
1125 unsigned long flags;
1126 unsigned int mode, imr, quot, baud;
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001127 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001128
Andrew Victor03abeac2007-05-03 12:26:24 +01001129 /* Get current mode register */
Remy Bohmerb843aa22008-02-08 04:21:01 -08001130 mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
Peter Ma8e706c42009-03-31 10:31:02 -07001131 | ATMEL_US_NBSTOP | ATMEL_US_PAR
1132 | ATMEL_US_USMODE);
Andrew Victor03abeac2007-05-03 12:26:24 +01001133
Remy Bohmerb843aa22008-02-08 04:21:01 -08001134 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001135 quot = uart_get_divisor(port, baud);
1136
Remy Bohmerb843aa22008-02-08 04:21:01 -08001137 if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
Andrew Victor03abeac2007-05-03 12:26:24 +01001138 quot /= 8;
1139 mode |= ATMEL_US_USCLKS_MCK_DIV8;
1140 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001141
1142 /* byte size */
1143 switch (termios->c_cflag & CSIZE) {
1144 case CS5:
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001145 mode |= ATMEL_US_CHRL_5;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001146 break;
1147 case CS6:
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001148 mode |= ATMEL_US_CHRL_6;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001149 break;
1150 case CS7:
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001151 mode |= ATMEL_US_CHRL_7;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001152 break;
1153 default:
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001154 mode |= ATMEL_US_CHRL_8;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001155 break;
1156 }
1157
1158 /* stop bits */
1159 if (termios->c_cflag & CSTOPB)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001160 mode |= ATMEL_US_NBSTOP_2;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001161
1162 /* parity */
1163 if (termios->c_cflag & PARENB) {
Remy Bohmerb843aa22008-02-08 04:21:01 -08001164 /* Mark or Space parity */
1165 if (termios->c_cflag & CMSPAR) {
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001166 if (termios->c_cflag & PARODD)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001167 mode |= ATMEL_US_PAR_MARK;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001168 else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001169 mode |= ATMEL_US_PAR_SPACE;
Remy Bohmerb843aa22008-02-08 04:21:01 -08001170 } else if (termios->c_cflag & PARODD)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001171 mode |= ATMEL_US_PAR_ODD;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001172 else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001173 mode |= ATMEL_US_PAR_EVEN;
Remy Bohmerb843aa22008-02-08 04:21:01 -08001174 } else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001175 mode |= ATMEL_US_PAR_NONE;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001176
Peter Ma8e706c42009-03-31 10:31:02 -07001177 /* hardware handshake (RTS/CTS) */
1178 if (termios->c_cflag & CRTSCTS)
1179 mode |= ATMEL_US_USMODE_HWHS;
1180 else
1181 mode |= ATMEL_US_USMODE_NORMAL;
1182
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001183 spin_lock_irqsave(&port->lock, flags);
1184
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001185 port->read_status_mask = ATMEL_US_OVRE;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001186 if (termios->c_iflag & INPCK)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001187 port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001188 if (termios->c_iflag & (BRKINT | PARMRK))
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001189 port->read_status_mask |= ATMEL_US_RXBRK;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001190
Chip Coldwella6670612008-02-08 04:21:06 -08001191 if (atmel_use_dma_rx(port))
1192 /* need to enable error interrupts */
1193 UART_PUT_IER(port, port->read_status_mask);
1194
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001195 /*
1196 * Characters to ignore
1197 */
1198 port->ignore_status_mask = 0;
1199 if (termios->c_iflag & IGNPAR)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001200 port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001201 if (termios->c_iflag & IGNBRK) {
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001202 port->ignore_status_mask |= ATMEL_US_RXBRK;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001203 /*
1204 * If we're ignoring parity and break indicators,
1205 * ignore overruns too (for real raw support).
1206 */
1207 if (termios->c_iflag & IGNPAR)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001208 port->ignore_status_mask |= ATMEL_US_OVRE;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001209 }
Remy Bohmerb843aa22008-02-08 04:21:01 -08001210 /* TODO: Ignore all characters if CREAD is set.*/
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001211
1212 /* update the per-port timeout */
1213 uart_update_timeout(port, termios->c_cflag, baud);
1214
Haavard Skinnemoen0ccad872009-06-16 17:02:03 +01001215 /*
1216 * save/disable interrupts. The tty layer will ensure that the
1217 * transmitter is empty if requested by the caller, so there's
1218 * no need to wait for it here.
1219 */
Remy Bohmerb843aa22008-02-08 04:21:01 -08001220 imr = UART_GET_IMR(port);
1221 UART_PUT_IDR(port, -1);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001222
1223 /* disable receiver and transmitter */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001224 UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001225
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001226 /* Resetting serial mode to RS232 (0x0) */
1227 mode &= ~ATMEL_US_USMODE;
1228
1229 if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
1230 dev_dbg(port->dev, "Setting UART to RS485\n");
Claudio Scordino1b633182010-07-20 15:26:47 -07001231 if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
1232 UART_PUT_TTGR(port,
1233 atmel_port->rs485.delay_rts_after_send);
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001234 mode |= ATMEL_US_USMODE_RS485;
1235 } else {
1236 dev_dbg(port->dev, "Setting UART to RS232\n");
1237 }
1238
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001239 /* set the parity, stop bits and data size */
1240 UART_PUT_MR(port, mode);
1241
1242 /* set the baud rate */
1243 UART_PUT_BRGR(port, quot);
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001244 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
1245 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001246
1247 /* restore interrupts */
1248 UART_PUT_IER(port, imr);
1249
1250 /* CTS flow-control and modem-status interrupts */
1251 if (UART_ENABLE_MS(port, termios->c_cflag))
1252 port->ops->enable_ms(port);
1253
1254 spin_unlock_irqrestore(&port->lock, flags);
1255}
1256
Viktar Palstsiuk42bd7a42011-02-09 15:26:13 +01001257static void atmel_set_ldisc(struct uart_port *port, int new)
1258{
1259 int line = port->line;
1260
1261 if (line >= port->state->port.tty->driver->num)
1262 return;
1263
1264 if (port->state->port.tty->ldisc->ops->num == N_PPS) {
1265 port->flags |= UPF_HARDPPS_CD;
1266 atmel_enable_ms(port);
1267 } else {
1268 port->flags &= ~UPF_HARDPPS_CD;
1269 }
1270}
1271
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001272/*
1273 * Return string describing the specified port
1274 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001275static const char *atmel_type(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001276{
Haavard Skinnemoen9ab4f882006-10-04 16:02:06 +02001277 return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001278}
1279
1280/*
1281 * Release the memory region(s) being used by 'port'.
1282 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001283static void atmel_release_port(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001284{
Andrew Victorafefc412006-06-19 19:53:19 +01001285 struct platform_device *pdev = to_platform_device(port->dev);
1286 int size = pdev->resource[0].end - pdev->resource[0].start + 1;
1287
1288 release_mem_region(port->mapbase, size);
1289
1290 if (port->flags & UPF_IOREMAP) {
1291 iounmap(port->membase);
1292 port->membase = NULL;
1293 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001294}
1295
1296/*
1297 * Request the memory region(s) being used by 'port'.
1298 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001299static int atmel_request_port(struct uart_port *port)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001300{
Andrew Victorafefc412006-06-19 19:53:19 +01001301 struct platform_device *pdev = to_platform_device(port->dev);
1302 int size = pdev->resource[0].end - pdev->resource[0].start + 1;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001303
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001304 if (!request_mem_region(port->mapbase, size, "atmel_serial"))
Andrew Victorafefc412006-06-19 19:53:19 +01001305 return -EBUSY;
1306
1307 if (port->flags & UPF_IOREMAP) {
1308 port->membase = ioremap(port->mapbase, size);
1309 if (port->membase == NULL) {
1310 release_mem_region(port->mapbase, size);
1311 return -ENOMEM;
1312 }
1313 }
1314
1315 return 0;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001316}
1317
1318/*
1319 * Configure/autoconfigure the port.
1320 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001321static void atmel_config_port(struct uart_port *port, int flags)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001322{
1323 if (flags & UART_CONFIG_TYPE) {
Haavard Skinnemoen9ab4f882006-10-04 16:02:06 +02001324 port->type = PORT_ATMEL;
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001325 atmel_request_port(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001326 }
1327}
1328
1329/*
1330 * Verify the new serial_struct (for TIOCSSERIAL).
1331 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001332static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001333{
1334 int ret = 0;
Haavard Skinnemoen9ab4f882006-10-04 16:02:06 +02001335 if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001336 ret = -EINVAL;
1337 if (port->irq != ser->irq)
1338 ret = -EINVAL;
1339 if (ser->io_type != SERIAL_IO_MEM)
1340 ret = -EINVAL;
1341 if (port->uartclk / 16 != ser->baud_base)
1342 ret = -EINVAL;
1343 if ((void *)port->mapbase != ser->iomem_base)
1344 ret = -EINVAL;
1345 if (port->iobase != ser->port)
1346 ret = -EINVAL;
1347 if (ser->hub6 != 0)
1348 ret = -EINVAL;
1349 return ret;
1350}
1351
Albin Tonnerre8fe2d542009-12-09 12:31:32 -08001352#ifdef CONFIG_CONSOLE_POLL
1353static int atmel_poll_get_char(struct uart_port *port)
1354{
1355 while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
1356 cpu_relax();
1357
1358 return UART_GET_CHAR(port);
1359}
1360
1361static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
1362{
1363 while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
1364 cpu_relax();
1365
1366 UART_PUT_CHAR(port, ch);
1367}
1368#endif
1369
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001370static int
1371atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
1372{
1373 struct serial_rs485 rs485conf;
1374
1375 switch (cmd) {
1376 case TIOCSRS485:
1377 if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
1378 sizeof(rs485conf)))
1379 return -EFAULT;
1380
1381 atmel_config_rs485(port, &rs485conf);
1382 break;
1383
1384 case TIOCGRS485:
1385 if (copy_to_user((struct serial_rs485 *) arg,
1386 &(to_atmel_uart_port(port)->rs485),
1387 sizeof(rs485conf)))
1388 return -EFAULT;
1389 break;
1390
1391 default:
1392 return -ENOIOCTLCMD;
1393 }
1394 return 0;
1395}
1396
1397
1398
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001399static struct uart_ops atmel_pops = {
1400 .tx_empty = atmel_tx_empty,
1401 .set_mctrl = atmel_set_mctrl,
1402 .get_mctrl = atmel_get_mctrl,
1403 .stop_tx = atmel_stop_tx,
1404 .start_tx = atmel_start_tx,
1405 .stop_rx = atmel_stop_rx,
1406 .enable_ms = atmel_enable_ms,
1407 .break_ctl = atmel_break_ctl,
1408 .startup = atmel_startup,
1409 .shutdown = atmel_shutdown,
Haavard Skinnemoen9afd5612008-07-16 21:52:46 +01001410 .flush_buffer = atmel_flush_buffer,
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001411 .set_termios = atmel_set_termios,
Viktar Palstsiuk42bd7a42011-02-09 15:26:13 +01001412 .set_ldisc = atmel_set_ldisc,
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001413 .type = atmel_type,
1414 .release_port = atmel_release_port,
1415 .request_port = atmel_request_port,
1416 .config_port = atmel_config_port,
1417 .verify_port = atmel_verify_port,
1418 .pm = atmel_serial_pm,
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001419 .ioctl = atmel_ioctl,
Albin Tonnerre8fe2d542009-12-09 12:31:32 -08001420#ifdef CONFIG_CONSOLE_POLL
1421 .poll_get_char = atmel_poll_get_char,
1422 .poll_put_char = atmel_poll_put_char,
1423#endif
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001424};
1425
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +02001426static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port,
1427 struct device_node *np)
1428{
1429 u32 rs485_delay[2];
1430
1431 /* DMA/PDC usage specification */
1432 if (of_get_property(np, "atmel,use-dma-rx", NULL))
1433 atmel_port->use_dma_rx = 1;
1434 else
1435 atmel_port->use_dma_rx = 0;
1436 if (of_get_property(np, "atmel,use-dma-tx", NULL))
1437 atmel_port->use_dma_tx = 1;
1438 else
1439 atmel_port->use_dma_tx = 0;
1440
1441 /* rs485 properties */
1442 if (of_property_read_u32_array(np, "rs485-rts-delay",
1443 rs485_delay, 2) == 0) {
1444 struct serial_rs485 *rs485conf = &atmel_port->rs485;
1445
1446 rs485conf->delay_rts_before_send = rs485_delay[0];
1447 rs485conf->delay_rts_after_send = rs485_delay[1];
1448 rs485conf->flags = 0;
1449
1450 if (rs485conf->delay_rts_before_send == 0 &&
1451 rs485conf->delay_rts_after_send == 0) {
1452 rs485conf->flags |= SER_RS485_RTS_ON_SEND;
1453 } else {
1454 if (rs485conf->delay_rts_before_send)
1455 rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND;
1456 if (rs485conf->delay_rts_after_send)
1457 rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
1458 }
1459
1460 if (of_get_property(np, "rs485-rx-during-tx", NULL))
1461 rs485conf->flags |= SER_RS485_RX_DURING_TX;
1462
1463 if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
1464 rs485conf->flags |= SER_RS485_ENABLED;
1465 }
1466}
1467
Andrew Victorafefc412006-06-19 19:53:19 +01001468/*
1469 * Configure the port from the platform device resource info.
1470 */
Remy Bohmerb843aa22008-02-08 04:21:01 -08001471static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
1472 struct platform_device *pdev)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001473{
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001474 struct uart_port *port = &atmel_port->uart;
Nicolas Ferre1acfc7e2011-10-12 18:06:57 +02001475 struct atmel_uart_data *pdata = pdev->dev.platform_data;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001476
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +02001477 if (pdev->dev.of_node) {
1478 atmel_of_init_port(atmel_port, pdev->dev.of_node);
1479 } else {
1480 atmel_port->use_dma_rx = pdata->use_dma_rx;
1481 atmel_port->use_dma_tx = pdata->use_dma_tx;
1482 atmel_port->rs485 = pdata->rs485;
1483 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001484
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001485 port->iotype = UPIO_MEM;
1486 port->flags = UPF_BOOT_AUTOCONF;
1487 port->ops = &atmel_pops;
1488 port->fifosize = 1;
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001489 port->dev = &pdev->dev;
Andrew Victorafefc412006-06-19 19:53:19 +01001490 port->mapbase = pdev->resource[0].start;
1491 port->irq = pdev->resource[1].start;
1492
Remy Bohmer1ecc26b2008-02-08 04:21:05 -08001493 tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
1494 (unsigned long)port);
1495
1496 memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
1497
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +02001498 if (pdata && pdata->regs) {
Haavard Skinnemoen75d35212006-10-04 16:02:08 +02001499 /* Already mapped by setup code */
Nicolas Ferre1acfc7e2011-10-12 18:06:57 +02001500 port->membase = pdata->regs;
Nicolas Ferre588edbf2011-10-12 18:06:58 +02001501 } else {
Andrew Victorafefc412006-06-19 19:53:19 +01001502 port->flags |= UPF_IOREMAP;
1503 port->membase = NULL;
1504 }
1505
Remy Bohmerb843aa22008-02-08 04:21:01 -08001506 /* for console, the clock could already be configured */
1507 if (!atmel_port->clk) {
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001508 atmel_port->clk = clk_get(&pdev->dev, "usart");
1509 clk_enable(atmel_port->clk);
1510 port->uartclk = clk_get_rate(atmel_port->clk);
David Brownell06a7f052008-11-06 12:53:40 -08001511 clk_disable(atmel_port->clk);
1512 /* only enable clock when USART is in use */
Andrew Victorafefc412006-06-19 19:53:19 +01001513 }
Chip Coldwella6670612008-02-08 04:21:06 -08001514
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001515 /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
1516 if (atmel_port->rs485.flags & SER_RS485_ENABLED)
1517 atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
1518 else if (atmel_use_dma_tx(port)) {
Chip Coldwella6670612008-02-08 04:21:06 -08001519 port->fifosize = PDC_BUFFER_SIZE;
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001520 atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
1521 } else {
1522 atmel_port->tx_done_mask = ATMEL_US_TXRDY;
1523 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001524}
1525
Andrew Victorafefc412006-06-19 19:53:19 +01001526/*
1527 * Register board-specific modem-control line handlers.
1528 */
Haavard Skinnemoen71f2e2b2006-10-04 16:02:07 +02001529void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001530{
1531 if (fns->enable_ms)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001532 atmel_pops.enable_ms = fns->enable_ms;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001533 if (fns->get_mctrl)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001534 atmel_pops.get_mctrl = fns->get_mctrl;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001535 if (fns->set_mctrl)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001536 atmel_pops.set_mctrl = fns->set_mctrl;
Haavard Skinnemoen71f2e2b2006-10-04 16:02:07 +02001537 atmel_open_hook = fns->open;
1538 atmel_close_hook = fns->close;
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001539 atmel_pops.pm = fns->pm;
1540 atmel_pops.set_wake = fns->set_wake;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001541}
1542
Haavard Skinnemoen749c4e62006-10-04 16:02:02 +02001543#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001544static void atmel_console_putchar(struct uart_port *port, int ch)
Russell Kingd3587882006-03-20 20:00:09 +00001545{
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001546 while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
Haavard Skinnemoen829dd812008-02-08 04:21:02 -08001547 cpu_relax();
Russell Kingd3587882006-03-20 20:00:09 +00001548 UART_PUT_CHAR(port, ch);
1549}
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001550
1551/*
1552 * Interrupts are disabled on entering
1553 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001554static void atmel_console_write(struct console *co, const char *s, u_int count)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001555{
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001556 struct uart_port *port = &atmel_ports[co->index].uart;
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001557 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Russell Kingd3587882006-03-20 20:00:09 +00001558 unsigned int status, imr;
Marc Pignat39d4c922008-04-02 13:04:42 -07001559 unsigned int pdc_tx;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001560
1561 /*
Remy Bohmerb843aa22008-02-08 04:21:01 -08001562 * First, save IMR and then disable interrupts
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001563 */
Remy Bohmerb843aa22008-02-08 04:21:01 -08001564 imr = UART_GET_IMR(port);
Claudio Scordinoe8faff72010-05-03 13:31:28 +01001565 UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001566
Marc Pignat39d4c922008-04-02 13:04:42 -07001567 /* Store PDC transmit status and disable it */
1568 pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
1569 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
1570
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001571 uart_console_write(port, s, count, atmel_console_putchar);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001572
1573 /*
Remy Bohmerb843aa22008-02-08 04:21:01 -08001574 * Finally, wait for transmitter to become empty
1575 * and restore IMR
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001576 */
1577 do {
1578 status = UART_GET_CSR(port);
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001579 } while (!(status & ATMEL_US_TXRDY));
Marc Pignat39d4c922008-04-02 13:04:42 -07001580
1581 /* Restore PDC transmit status */
1582 if (pdc_tx)
1583 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
1584
Remy Bohmerb843aa22008-02-08 04:21:01 -08001585 /* set interrupts back the way they were */
1586 UART_PUT_IER(port, imr);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001587}
1588
1589/*
Remy Bohmerb843aa22008-02-08 04:21:01 -08001590 * If the port was already initialised (eg, by a boot loader),
1591 * try to determine the current setup.
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001592 */
Remy Bohmerb843aa22008-02-08 04:21:01 -08001593static void __init atmel_console_get_options(struct uart_port *port, int *baud,
1594 int *parity, int *bits)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001595{
1596 unsigned int mr, quot;
1597
Haavard Skinnemoen1c0fd822008-02-08 04:21:03 -08001598 /*
1599 * If the baud rate generator isn't running, the port wasn't
1600 * initialized by the boot loader.
1601 */
Haavard Skinnemoen9c81c5c2008-06-05 22:46:39 -07001602 quot = UART_GET_BRGR(port) & ATMEL_US_CD;
Haavard Skinnemoen1c0fd822008-02-08 04:21:03 -08001603 if (!quot)
1604 return;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001605
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001606 mr = UART_GET_MR(port) & ATMEL_US_CHRL;
1607 if (mr == ATMEL_US_CHRL_8)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001608 *bits = 8;
1609 else
1610 *bits = 7;
1611
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001612 mr = UART_GET_MR(port) & ATMEL_US_PAR;
1613 if (mr == ATMEL_US_PAR_EVEN)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001614 *parity = 'e';
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001615 else if (mr == ATMEL_US_PAR_ODD)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001616 *parity = 'o';
1617
Haavard Skinnemoen4d5e3922006-10-04 16:02:11 +02001618 /*
1619 * The serial core only rounds down when matching this to a
1620 * supported baud rate. Make sure we don't end up slightly
1621 * lower than one of those, as it would make us fall through
1622 * to a much lower baud rate than we really want.
1623 */
Haavard Skinnemoen4d5e3922006-10-04 16:02:11 +02001624 *baud = port->uartclk / (16 * (quot - 1));
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001625}
1626
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001627static int __init atmel_console_setup(struct console *co, char *options)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001628{
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001629 struct uart_port *port = &atmel_ports[co->index].uart;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001630 int baud = 115200;
1631 int bits = 8;
1632 int parity = 'n';
1633 int flow = 'n';
1634
Remy Bohmerb843aa22008-02-08 04:21:01 -08001635 if (port->membase == NULL) {
1636 /* Port not initialized yet - delay setup */
Andrew Victorafefc412006-06-19 19:53:19 +01001637 return -ENODEV;
Remy Bohmerb843aa22008-02-08 04:21:01 -08001638 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001639
David Brownell06a7f052008-11-06 12:53:40 -08001640 clk_enable(atmel_ports[co->index].clk);
1641
Remy Bohmerb843aa22008-02-08 04:21:01 -08001642 UART_PUT_IDR(port, -1);
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001643 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
1644 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001645
1646 if (options)
1647 uart_parse_options(options, &baud, &parity, &bits, &flow);
1648 else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001649 atmel_console_get_options(port, &baud, &parity, &bits);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001650
1651 return uart_set_options(port, co, baud, parity, bits, flow);
1652}
1653
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001654static struct uart_driver atmel_uart;
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001655
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001656static struct console atmel_console = {
1657 .name = ATMEL_DEVICENAME,
1658 .write = atmel_console_write,
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001659 .device = uart_console_device,
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001660 .setup = atmel_console_setup,
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001661 .flags = CON_PRINTBUFFER,
1662 .index = -1,
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001663 .data = &atmel_uart,
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001664};
1665
David Brownell06a7f052008-11-06 12:53:40 -08001666#define ATMEL_CONSOLE_DEVICE (&atmel_console)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001667
Andrew Victorafefc412006-06-19 19:53:19 +01001668/*
1669 * Early console initialization (before VM subsystem initialized).
1670 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001671static int __init atmel_console_init(void)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001672{
Haavard Skinnemoen73e27982006-10-04 16:02:04 +02001673 if (atmel_default_console_device) {
Voss, Nikolaus0d0a3cc2011-08-10 14:02:29 +02001674 struct atmel_uart_data *pdata =
1675 atmel_default_console_device->dev.platform_data;
Linus Torvaldsefb8d212011-10-26 15:11:09 +02001676 int id = pdata->num;
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +02001677 struct atmel_uart_port *port = &atmel_ports[id];
Voss, Nikolaus0d0a3cc2011-08-10 14:02:29 +02001678
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +02001679 port->backup_imr = 0;
1680 port->uart.line = id;
1681
1682 add_preferred_console(ATMEL_DEVICENAME, id, NULL);
1683 atmel_init_port(port, atmel_default_console_device);
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001684 register_console(&atmel_console);
Andrew Victorafefc412006-06-19 19:53:19 +01001685 }
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001686
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001687 return 0;
1688}
Remy Bohmerb843aa22008-02-08 04:21:01 -08001689
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001690console_initcall(atmel_console_init);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001691
Andrew Victorafefc412006-06-19 19:53:19 +01001692/*
1693 * Late console initialization.
1694 */
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001695static int __init atmel_late_console_init(void)
Andrew Victorafefc412006-06-19 19:53:19 +01001696{
Remy Bohmerb843aa22008-02-08 04:21:01 -08001697 if (atmel_default_console_device
1698 && !(atmel_console.flags & CON_ENABLED))
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001699 register_console(&atmel_console);
Andrew Victorafefc412006-06-19 19:53:19 +01001700
1701 return 0;
1702}
Remy Bohmerb843aa22008-02-08 04:21:01 -08001703
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001704core_initcall(atmel_late_console_init);
Andrew Victorafefc412006-06-19 19:53:19 +01001705
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001706static inline bool atmel_is_console_port(struct uart_port *port)
1707{
1708 return port->cons && port->cons->index == port->line;
1709}
1710
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001711#else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001712#define ATMEL_CONSOLE_DEVICE NULL
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001713
1714static inline bool atmel_is_console_port(struct uart_port *port)
1715{
1716 return false;
1717}
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001718#endif
1719
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001720static struct uart_driver atmel_uart = {
Remy Bohmerb843aa22008-02-08 04:21:01 -08001721 .owner = THIS_MODULE,
1722 .driver_name = "atmel_serial",
1723 .dev_name = ATMEL_DEVICENAME,
1724 .major = SERIAL_ATMEL_MAJOR,
1725 .minor = MINOR_START,
1726 .nr = ATMEL_MAX_UART,
1727 .cons = ATMEL_CONSOLE_DEVICE,
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001728};
1729
Andrew Victorafefc412006-06-19 19:53:19 +01001730#ifdef CONFIG_PM
Haavard Skinnemoenf826caa2008-02-24 14:34:45 +01001731static bool atmel_serial_clk_will_stop(void)
1732{
1733#ifdef CONFIG_ARCH_AT91
1734 return at91_suspend_entering_slow_clock();
1735#else
1736 return false;
1737#endif
1738}
1739
Remy Bohmerb843aa22008-02-08 04:21:01 -08001740static int atmel_serial_suspend(struct platform_device *pdev,
1741 pm_message_t state)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001742{
Andrew Victorafefc412006-06-19 19:53:19 +01001743 struct uart_port *port = platform_get_drvdata(pdev);
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -08001744 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001745
Haavard Skinnemoene1c609e2008-03-14 14:54:13 +01001746 if (atmel_is_console_port(port) && console_suspend_enabled) {
1747 /* Drain the TX shifter */
1748 while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
1749 cpu_relax();
1750 }
1751
Anti Sullinf05596d2008-09-22 13:57:54 -07001752 /* we can not wake up if we're running on slow clock */
1753 atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
1754 if (atmel_serial_clk_will_stop())
1755 device_set_wakeup_enable(&pdev->dev, 0);
1756
1757 uart_suspend_port(&atmel_uart, port);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001758
1759 return 0;
1760}
1761
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001762static int atmel_serial_resume(struct platform_device *pdev)
Andrew Victorafefc412006-06-19 19:53:19 +01001763{
1764 struct uart_port *port = platform_get_drvdata(pdev);
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -08001765 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Andrew Victorafefc412006-06-19 19:53:19 +01001766
Anti Sullinf05596d2008-09-22 13:57:54 -07001767 uart_resume_port(&atmel_uart, port);
1768 device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
Andrew Victorafefc412006-06-19 19:53:19 +01001769
1770 return 0;
1771}
1772#else
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001773#define atmel_serial_suspend NULL
1774#define atmel_serial_resume NULL
Andrew Victorafefc412006-06-19 19:53:19 +01001775#endif
1776
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001777static int __devinit atmel_serial_probe(struct platform_device *pdev)
Andrew Victorafefc412006-06-19 19:53:19 +01001778{
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001779 struct atmel_uart_port *port;
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +02001780 struct device_node *np = pdev->dev.of_node;
Jean-Christophe PLAGNIOL-VILLARDdeba1a02011-06-21 12:17:00 +08001781 struct atmel_uart_data *pdata = pdev->dev.platform_data;
Remy Bohmer1ecc26b2008-02-08 04:21:05 -08001782 void *data;
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +02001783 int ret = -ENODEV;
Andrew Victorafefc412006-06-19 19:53:19 +01001784
Haavard Skinnemoen9d09daf2009-10-26 16:50:02 -07001785 BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
Remy Bohmer1ecc26b2008-02-08 04:21:05 -08001786
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +02001787 if (np)
1788 ret = of_alias_get_id(np, "serial");
1789 else
1790 if (pdata)
1791 ret = pdata->num;
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +02001792
1793 if (ret < 0)
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +02001794 /* port id not found in platform data nor device-tree aliases:
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +02001795 * auto-enumerate it */
1796 ret = find_first_zero_bit(&atmel_ports_in_use,
1797 sizeof(atmel_ports_in_use));
1798
1799 if (ret > ATMEL_MAX_UART) {
1800 ret = -ENODEV;
1801 goto err;
1802 }
1803
1804 if (test_and_set_bit(ret, &atmel_ports_in_use)) {
1805 /* port already in use */
1806 ret = -EBUSY;
1807 goto err;
1808 }
1809
1810 port = &atmel_ports[ret];
Anti Sullinf05596d2008-09-22 13:57:54 -07001811 port->backup_imr = 0;
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +02001812 port->uart.line = ret;
Anti Sullinf05596d2008-09-22 13:57:54 -07001813
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001814 atmel_init_port(port, pdev);
Andrew Victorafefc412006-06-19 19:53:19 +01001815
Chip Coldwella6670612008-02-08 04:21:06 -08001816 if (!atmel_use_dma_rx(&port->uart)) {
1817 ret = -ENOMEM;
Haavard Skinnemoen64334712008-02-08 04:21:07 -08001818 data = kmalloc(sizeof(struct atmel_uart_char)
1819 * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
Chip Coldwella6670612008-02-08 04:21:06 -08001820 if (!data)
1821 goto err_alloc_ring;
1822 port->rx_ring.buf = data;
1823 }
Remy Bohmer1ecc26b2008-02-08 04:21:05 -08001824
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001825 ret = uart_add_one_port(&atmel_uart, &port->uart);
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001826 if (ret)
1827 goto err_add_port;
1828
Albin Tonnerre8da14b52009-07-29 15:04:18 -07001829#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
David Brownell06a7f052008-11-06 12:53:40 -08001830 if (atmel_is_console_port(&port->uart)
1831 && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
1832 /*
1833 * The serial core enabled the clock for us, so undo
1834 * the clk_enable() in atmel_console_setup()
1835 */
1836 clk_disable(port->clk);
1837 }
Albin Tonnerre8da14b52009-07-29 15:04:18 -07001838#endif
David Brownell06a7f052008-11-06 12:53:40 -08001839
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001840 device_init_wakeup(&pdev->dev, 1);
1841 platform_set_drvdata(pdev, port);
1842
Claudio Scordino5dfbd1d72011-01-13 15:45:39 -08001843 if (port->rs485.flags & SER_RS485_ENABLED) {
1844 UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
1845 UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
1846 }
1847
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001848 return 0;
1849
1850err_add_port:
Remy Bohmer1ecc26b2008-02-08 04:21:05 -08001851 kfree(port->rx_ring.buf);
1852 port->rx_ring.buf = NULL;
1853err_alloc_ring:
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001854 if (!atmel_is_console_port(&port->uart)) {
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001855 clk_put(port->clk);
1856 port->clk = NULL;
Andrew Victorafefc412006-06-19 19:53:19 +01001857 }
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +02001858err:
Andrew Victorafefc412006-06-19 19:53:19 +01001859 return ret;
1860}
1861
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001862static int __devexit atmel_serial_remove(struct platform_device *pdev)
Andrew Victorafefc412006-06-19 19:53:19 +01001863{
1864 struct uart_port *port = platform_get_drvdata(pdev);
Haavard Skinnemoenc811ab82008-02-08 04:21:08 -08001865 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
Andrew Victorafefc412006-06-19 19:53:19 +01001866 int ret = 0;
1867
Andrew Victorafefc412006-06-19 19:53:19 +01001868 device_init_wakeup(&pdev->dev, 0);
1869 platform_set_drvdata(pdev, NULL);
1870
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001871 ret = uart_remove_one_port(&atmel_uart, port);
1872
Remy Bohmer1ecc26b2008-02-08 04:21:05 -08001873 tasklet_kill(&atmel_port->tasklet);
1874 kfree(atmel_port->rx_ring.buf);
1875
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001876 /* "port" is allocated statically, so we shouldn't free it */
1877
Nicolas Ferre4cbf9f42011-10-12 18:06:59 +02001878 clear_bit(port->line, &atmel_ports_in_use);
1879
Haavard Skinnemoendfa7f342008-02-08 04:21:04 -08001880 clk_put(atmel_port->clk);
Andrew Victorafefc412006-06-19 19:53:19 +01001881
1882 return ret;
1883}
1884
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001885static struct platform_driver atmel_serial_driver = {
1886 .probe = atmel_serial_probe,
1887 .remove = __devexit_p(atmel_serial_remove),
1888 .suspend = atmel_serial_suspend,
1889 .resume = atmel_serial_resume,
Andrew Victorafefc412006-06-19 19:53:19 +01001890 .driver = {
Haavard Skinnemoen1e8ea802006-10-04 16:02:03 +02001891 .name = "atmel_usart",
Andrew Victorafefc412006-06-19 19:53:19 +01001892 .owner = THIS_MODULE,
Nicolas Ferre5fbe46b2011-10-12 18:07:00 +02001893 .of_match_table = of_match_ptr(atmel_serial_dt_ids),
Andrew Victorafefc412006-06-19 19:53:19 +01001894 },
1895};
1896
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001897static int __init atmel_serial_init(void)
Andrew Victorafefc412006-06-19 19:53:19 +01001898{
1899 int ret;
1900
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001901 ret = uart_register_driver(&atmel_uart);
Andrew Victorafefc412006-06-19 19:53:19 +01001902 if (ret)
1903 return ret;
1904
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001905 ret = platform_driver_register(&atmel_serial_driver);
Andrew Victorafefc412006-06-19 19:53:19 +01001906 if (ret)
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001907 uart_unregister_driver(&atmel_uart);
Andrew Victorafefc412006-06-19 19:53:19 +01001908
1909 return ret;
1910}
1911
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001912static void __exit atmel_serial_exit(void)
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001913{
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001914 platform_driver_unregister(&atmel_serial_driver);
1915 uart_unregister_driver(&atmel_uart);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001916}
1917
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001918module_init(atmel_serial_init);
1919module_exit(atmel_serial_exit);
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001920
1921MODULE_AUTHOR("Rick Bronson");
Haavard Skinnemoen7192f922006-10-04 16:02:05 +02001922MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver");
Andrew Victor1e6c9c22006-01-10 16:59:27 +00001923MODULE_LICENSE("GPL");
Kay Sieverse169c132008-04-15 14:34:35 -07001924MODULE_ALIAS("platform:atmel_usart");