blob: 782c499a3738dc7915f63bbbb8592781856dd0e6 [file] [log] [blame]
David Woodhouse4d2acfb2008-05-23 13:58:12 +01001#
2# kbuild file for firmware/
3#
4
5# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6# leading /, it's relative to $(srctree).
7fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
David Woodhouse88ecf812008-05-29 11:01:51 +030012# There are three cases to care about:
13# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14# include the firmware files to include, according to .config
15# 2. 'make modules_install', which will install firmware for modules, and
16# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17# 3. 'make firmware_install', which installs all firmware, unconditionally.
David Woodhoused172e7f2008-06-25 13:56:07 +010018
David Woodhouse88ecf812008-05-29 11:01:51 +030019# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21# But be aware that the config file might not be included at all.
22
Jaswinder Singh7f127d52008-07-05 15:28:30 +053023fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
David Woodhouse27d202f2008-06-05 12:59:51 +010024fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
David Woodhouse547d8bb2008-06-11 16:57:21 +010025fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
David Woodhouse0a2a7362008-05-29 19:50:06 +030026fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
David Woodhouse0f805b82008-05-29 16:39:16 +030027fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
David Woodhouse76770662008-05-26 23:01:27 +010028fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
David Woodhousea292f402008-05-29 14:48:34 +030029fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
30 ess/maestro3_assp_minisrc.fw
David Woodhouse18ee6df2008-05-29 15:07:34 +030031fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
32 yamaha/ds1e_ctrl.fw
David Woodhousec4667742008-06-23 11:41:04 +010033fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
34 tigon/tg3_tso5.bin
35fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
David Woodhouseae93a552008-05-30 16:19:39 +030036fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
37 emi26/bitstream.fw
David Woodhouseb8e24bf2008-05-30 17:35:47 +030038fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
39 emi62/spdif.fw emi62/midi.fw
David Woodhouse79682492008-05-29 17:17:17 +030040fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
41 kaweth/new_code_fix.bin \
42 kaweth/trigger_code_fix.bin
David Woodhouse2971c572008-05-30 14:04:03 +030043ifdef CONFIG_FIRMWARE_IN_KERNEL
44fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
45fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
46fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
47fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
48fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
49fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
50fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
51fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
52fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
53fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
54fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
55fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
56else
57fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
58 keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
59 keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
60 keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
61endif
David Woodhouse5f24e2d2008-05-30 18:49:51 +030062fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
Jaswinder Singh5b9ea932008-07-03 17:00:23 +053063fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
64 edgeport/down.fw edgeport/down2.fw
Jaswinder Singhd12b2192008-07-04 23:06:09 +053065fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
David Woodhouseec6752f2008-05-31 01:35:29 +030066fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
67 # whiteheat_loader_debug.fw
David Woodhouse3edbf982008-05-30 15:15:13 +030068fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
69fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
Jaswinder Singhfb54be82008-06-27 19:50:40 +053070fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
David Woodhouse04a33e42008-06-23 11:36:23 +010071fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
David Woodhouse88ecf812008-05-29 11:01:51 +030072
73fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
74
75# Directories which we _might_ need to create, so we have a rule for them.
76firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
David Woodhouse4d2acfb2008-05-23 13:58:12 +010077
78quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
79 cmd_mkdir = mkdir -p $@
80
81quiet_cmd_ihex = IHEX $@
82 cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
83
David Woodhouse8bd6b222008-05-31 15:07:18 +030084quiet_cmd_ihex2fw = IHEX2FW $@
85 cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
86
David Woodhouse59890f72008-06-26 13:55:30 +010087quiet_cmd_h16tofw = H16TOFW $@
88 cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
89
David Woodhouse4d2acfb2008-05-23 13:58:12 +010090quiet_cmd_fwbin = MK_FW $@
91 cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
92 FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
93 firmware/%.gen.S,%,$@))))"; \
94 ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
95 ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
96 PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
97 echo "/* Generated by firmware/Makefile */" > $@;\
98 echo " .section .rodata" >>$@;\
99 echo " .p2align $${ASM_ALIGN}" >>$@;\
100 echo "_fw_$${FWSTR}_bin:" >>$@;\
101 echo " .incbin \"$(2)\"" >>$@;\
102 echo "_fw_end:" >>$@;\
103 echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
104 echo " .p2align $${ASM_ALIGN}" >>$@;\
105 echo "_fw_$${FWSTR}_name:" >>$@;\
106 echo " .string \"$$FWNAME\"" >>$@;\
107 echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
108 echo " .p2align $${ASM_ALIGN}" >>$@;\
109 echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
110 echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
111 echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
112
113# One of these files will change, or come into existence, whenever
114# the configuration changes between 32-bit and 64-bit. The .S files
115# need to change when that happens.
116wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
117 include/config/ppc32.h include/config/ppc64.h \
118 include/config/superh32.h include/config/superh64.h \
119 include/config/x86_32.h include/config/x86_64.h)
120
121# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
122# It'll end up depending on these targets, so make them a PHONY rule which
123# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
124PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
125$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
126 @true
127
128# For the $$(dir %) trick, where we need % to be expanded first.
129.SECONDEXPANSION:
130
131$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
132 | $(objtree)/$$(dir %)
133 $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
134$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
135 include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %)
136 $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
137
138# The .o files depend on the binaries directly; the .S files don't.
139$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
140$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
141
David Woodhouse8bd6b222008-05-31 15:07:18 +0300142# .ihex is used just as a simple way to hold binary files in a source tree
143# where binaries are frowned upon. They are directly converted with objcopy.
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100144$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
145 $(call cmd,ihex)
146
David Woodhouse8bd6b222008-05-31 15:07:18 +0300147# .HEX is also Intel HEX, but where the offset and length in each record
148# is actually meaningful, because the firmware has to be loaded in a certain
149# order rather than as a single binary blob. Thus, we convert them into our
150# more compact binary representation of ihex records (<linux/ihex.h>)
151$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
152 $(call cmd,ihex2fw)
153
David Woodhouse59890f72008-06-26 13:55:30 +0100154# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
155$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
156 $(call cmd,h16tofw)
157
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100158$(firmware-dirs):
159 $(call cmd,mkdir)
160
David Woodhouse88ecf812008-05-29 11:01:51 +0300161obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
162obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100163
164# Remove .S files and binaries created from ihex
165# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
166targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
167 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
168
169# Without this, built-in.o won't be created when it's empty, and the
170# final vmlinux link will fail.
171obj-n := dummy
David Woodhouse8bd6b222008-05-31 15:07:18 +0300172
173hostprogs-y := ihex2fw