blob: 9a3c9f5e4fe82b5e132bc426592e603b243a091b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*======================================================================
2
3 A Sedlbauer PCMCIA client driver
4
5 This driver is for the Sedlbauer Speed Star and Speed Star II,
6 which are ISDN PCMCIA Cards.
7
8 The contents of this file are subject to the Mozilla Public
9 License Version 1.1 (the "License"); you may not use this file
10 except in compliance with the License. You may obtain a copy of
11 the License at http://www.mozilla.org/MPL/
12
13 Software distributed under the License is distributed on an "AS
14 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
15 implied. See the License for the specific language governing
16 rights and limitations under the License.
17
18 The initial developer of the original code is David A. Hinds
19 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
20 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21
22 Modifications from dummy_cs.c are Copyright (C) 1999-2001 Marcus Niemann
23 <maniemann@users.sourceforge.net>. All Rights Reserved.
24
25 Alternatively, the contents of this file may be used under the
26 terms of the GNU General Public License version 2 (the "GPL"), in
27 which case the provisions of the GPL are applicable instead of the
28 above. If you wish to allow the use of your version of this file
29 only under the terms of the GPL and not to allow others to use
30 your version of this file under the MPL, indicate your decision
31 by deleting the provisions above and replace them with the notice
32 and other provisions required by the GPL. If you do not delete
33 the provisions above, a recipient may use your version of this
34 file under either the MPL or the GPL.
35
36======================================================================*/
37
38#include <linux/kernel.h>
39#include <linux/module.h>
40#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070041#include <linux/ptrace.h>
42#include <linux/slab.h>
43#include <linux/string.h>
44#include <linux/timer.h>
45#include <linux/ioport.h>
46#include <asm/io.h>
47#include <asm/system.h>
48
Linus Torvalds1da177e2005-04-16 15:20:36 -070049#include <pcmcia/cs_types.h>
50#include <pcmcia/cs.h>
51#include <pcmcia/cistpl.h>
52#include <pcmcia/cisreg.h>
53#include <pcmcia/ds.h>
54#include "hisax_cfg.h"
55
56MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Sedlbauer cards");
57MODULE_AUTHOR("Marcus Niemann");
58MODULE_LICENSE("Dual MPL/GPL");
59
60/*
61 All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
62 you do not define PCMCIA_DEBUG at all, all the debug code will be
63 left out. If you compile with PCMCIA_DEBUG=0, the debug code will
64 be present but disabled -- but it can then be enabled for specific
65 modules at load time with a 'pc_debug=#' option to insmod.
66*/
67
68#ifdef PCMCIA_DEBUG
69static int pc_debug = PCMCIA_DEBUG;
70module_param(pc_debug, int, 0);
71#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
72static char *version =
73"sedlbauer_cs.c 1.1a 2001/01/28 15:04:04 (M.Niemann)";
74#else
75#define DEBUG(n, args...)
76#endif
77
78
79/*====================================================================*/
80
81/* Parameters that can be set with 'insmod' */
82
83static int protocol = 2; /* EURO-ISDN Default */
84module_param(protocol, int, 0);
85
86/*====================================================================*/
87
88/*
89 The event() function is this driver's Card Services event handler.
90 It will be called by Card Services when an appropriate card status
91 event is received. The config() and release() entry points are
92 used to configure or release a socket, in response to card
93 insertion and ejection events. They are invoked from the sedlbauer
94 event handler.
95*/
96
Dominik Brodowski15b99ac2006-03-31 17:26:06 +020097static int sedlbauer_config(struct pcmcia_device *link);
Dominik Brodowskifba395e2006-03-31 17:21:06 +020098static void sedlbauer_release(struct pcmcia_device *link);
Linus Torvalds1da177e2005-04-16 15:20:36 -070099
100/*
101 The attach() and detach() entry points are used to create and destroy
102 "instances" of the driver, where each instance represents everything
103 needed to manage one actual PCMCIA card.
104*/
105
Dominik Brodowskicc3b4862005-11-14 21:23:14 +0100106static void sedlbauer_detach(struct pcmcia_device *p_dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107
108/*
109 You'll also need to prototype all the functions that will actually
110 be used to talk to your device. See 'memory_cs' for a good example
111 of a fully self-sufficient driver; the other drivers rely more or
112 less on other parts of the kernel.
113*/
114
115/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116 A driver needs to provide a dev_node_t structure for each device
117 on a card. In some cases, there is only one device per card (for
118 example, ethernet cards, modems). In other cases, there may be
119 many actual or logical devices (SCSI adapters, memory cards with
120 multiple partitions). The dev_node_t structures need to be kept
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200121 in a linked list starting at the 'dev' field of a struct pcmcia_device
Linus Torvalds1da177e2005-04-16 15:20:36 -0700122 structure. We allocate them in the card's private data structure,
123 because they generally shouldn't be allocated dynamically.
124
125 In this case, we also provide a flag to indicate if a device is
126 "stopped" due to a power management event, or card ejection. The
127 device IO routines can use a flag like this to throttle IO to a
128 card that is not ready to accept it.
129*/
130
131typedef struct local_info_t {
Dominik Brodowskifd238232006-03-05 10:45:09 +0100132 struct pcmcia_device *p_dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133 dev_node_t node;
134 int stop;
135 int cardnr;
136} local_info_t;
137
138/*======================================================================
139
140 sedlbauer_attach() creates an "instance" of the driver, allocating
141 local data structures for one device. The device is registered
142 with Card Services.
143
144 The dev_link structure is initialized, but we don't actually
145 configure the card at this point -- we wait until we receive a
146 card insertion event.
147
148======================================================================*/
149
Dominik Brodowski15b99ac2006-03-31 17:26:06 +0200150static int sedlbauer_probe(struct pcmcia_device *link)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151{
152 local_info_t *local;
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200153
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154 DEBUG(0, "sedlbauer_attach()\n");
155
156 /* Allocate space for private device-specific data */
Burman Yan41f96932006-12-08 02:39:35 -0800157 local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
Dominik Brodowskif8cfa612005-11-14 21:25:51 +0100158 if (!local) return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159 local->cardnr = -1;
Dominik Brodowskifd238232006-03-05 10:45:09 +0100160
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200161 local->p_dev = link;
Dominik Brodowskifd238232006-03-05 10:45:09 +0100162 link->priv = local;
163
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164 /* Interrupt setup */
Karsten Keil0f6c10e2006-06-29 13:14:51 +0200165 link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
167 link->irq.Handler = NULL;
168
169 /*
170 General socket configuration defaults can go here. In this
171 client, we assume very little, and rely on the CIS for almost
172 everything. In most clients, many details (i.e., number, sizes,
173 and attributes of IO windows) are fixed by the nature of the
174 device, and can be hard-wired here.
175 */
176
177 /* from old sedl_cs
178 */
179 /* The io structure describes IO port mapping */
180 link->io.NumPorts1 = 8;
181 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
182 link->io.IOAddrLines = 3;
183
Linus Torvalds1da177e2005-04-16 15:20:36 -0700184 link->conf.Attributes = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700185 link->conf.IntType = INT_MEMORY_AND_IO;
186
Dominik Brodowski15b99ac2006-03-31 17:26:06 +0200187 return sedlbauer_config(link);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700188} /* sedlbauer_attach */
189
190/*======================================================================
191
192 This deletes a driver "instance". The device is de-registered
193 with Card Services. If it has been released, all local data
194 structures are freed. Otherwise, the structures will be freed
195 when the device is released.
196
197======================================================================*/
198
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200199static void sedlbauer_detach(struct pcmcia_device *link)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200{
Dominik Brodowskie2d40962006-03-02 00:09:29 +0100201 DEBUG(0, "sedlbauer_detach(0x%p)\n", link);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202
Dominik Brodowskie2d40962006-03-02 00:09:29 +0100203 ((local_info_t *)link->priv)->stop = 1;
204 sedlbauer_release(link);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205
Dominik Brodowskie2d40962006-03-02 00:09:29 +0100206 /* This points to the parent local_info_t struct */
207 kfree(link->priv);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208} /* sedlbauer_detach */
209
210/*======================================================================
211
212 sedlbauer_config() is scheduled to run after a CARD_INSERTION event
213 is received, to configure the PCMCIA socket, and to make the
214 device available to the system.
215
216======================================================================*/
217#define CS_CHECK(fn, ret) \
218do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
219
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200220static int sedlbauer_config_check(struct pcmcia_device *p_dev,
221 cistpl_cftable_entry_t *cfg,
Dominik Brodowski8e2fc392008-08-02 15:30:31 +0200222 cistpl_cftable_entry_t *dflt,
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200223 unsigned int vcc,
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200224 void *priv_data)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700225{
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200226 win_req_t *req = priv_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700227
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200228 if (cfg->index == 0)
229 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700230
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231 /* Does this card need audio output? */
232 if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200233 p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
234 p_dev->conf.Status = CCSR_AUDIO_ENA;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700235 }
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200236
Linus Torvalds1da177e2005-04-16 15:20:36 -0700237 /* Use power settings for Vcc and Vpp if present */
238 /* Note that the CIS values need to be rescaled */
239 if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200240 if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200241 return -ENODEV;
Dominik Brodowski8e2fc392008-08-02 15:30:31 +0200242 } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200243 if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200244 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245 }
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200246
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247 if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200248 p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
Dominik Brodowski8e2fc392008-08-02 15:30:31 +0200249 else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
250 p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200251
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252 /* Do we need to allocate an interrupt? */
Dominik Brodowski8e2fc392008-08-02 15:30:31 +0200253 if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200254 p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
255
Linus Torvalds1da177e2005-04-16 15:20:36 -0700256 /* IO window settings */
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200257 p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
Dominik Brodowski8e2fc392008-08-02 15:30:31 +0200258 if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
259 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200260 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
261 if (!(io->flags & CISTPL_IO_8BIT))
262 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
263 if (!(io->flags & CISTPL_IO_16BIT))
264 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
265 p_dev->io.BasePort1 = io->win[0].base;
266 p_dev->io.NumPorts1 = io->win[0].len;
267 if (io->nwin > 1) {
268 p_dev->io.Attributes2 = p_dev->io.Attributes1;
269 p_dev->io.BasePort2 = io->win[1].base;
270 p_dev->io.NumPorts2 = io->win[1].len;
271 }
272 /* This reserves IO space but doesn't actually enable it */
273 if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
274 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700275 }
276
277 /*
278 Now set up a common memory window, if needed. There is room
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200279 in the struct pcmcia_device structure for one memory window handle,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280 but if the base addresses need to be saved, or if multiple
281 windows are needed, the info should go in the private data
282 structure for this device.
283
284 Note that the memory window base is a physical address, and
285 needs to be mapped to virtual space with ioremap() before it
286 is used.
287 */
Dominik Brodowski8e2fc392008-08-02 15:30:31 +0200288 if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
289 cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200290 memreq_t map;
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200291 req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
292 req->Attributes |= WIN_ENABLE;
293 req->Base = mem->win[0].host_addr;
294 req->Size = mem->win[0].len;
295 req->AccessSpeed = 0;
296 if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200297 return -ENODEV;
298 map.Page = 0;
299 map.CardOffset = mem->win[0].card_addr;
300 if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
301 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700302 }
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200303 return 0;
304}
Dominik Brodowski50db3fd2006-01-15 10:05:19 +0100305
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200306
307
308static int sedlbauer_config(struct pcmcia_device *link)
309{
310 local_info_t *dev = link->priv;
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200311 win_req_t *req;
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200312 int last_fn, last_ret;
313 IsdnCard_t icard;
314
315 DEBUG(0, "sedlbauer_config(0x%p)\n", link);
316
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200317 req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
318 if (!req)
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200319 return -ENOMEM;
320
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200321 /*
322 In this loop, we scan the CIS for configuration table entries,
323 each of which describes a valid card configuration, including
324 voltage, IO window, memory window, and interrupt settings.
325
326 We make no assumptions about the card to be configured: we use
327 just the information available in the CIS. In an ideal world,
328 this would work for any PCMCIA card, but it requires a complete
329 and accurate CIS. In practice, a driver usually "knows" most of
330 these things without consulting the CIS, and most client drivers
331 will only use the CIS to fill in implementation-defined details.
332 */
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200333 last_ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200334 if (last_ret)
335 goto failed;
Dominik Brodowski50db3fd2006-01-15 10:05:19 +0100336
Linus Torvalds1da177e2005-04-16 15:20:36 -0700337 /*
338 Allocate an interrupt line. Note that this does not assign a
339 handler to the interrupt, unless the 'Handler' member of the
340 irq structure is initialized.
341 */
342 if (link->conf.Attributes & CONF_ENABLE_IRQ)
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200343 CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700344
345 /*
346 This actually configures the PCMCIA socket -- setting up
347 the I/O windows and the interrupt mapping, and putting the
348 card and host interface into "Memory and IO" mode.
349 */
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200350 CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351
352 /*
353 At this point, the dev_node_t structure(s) need to be
354 initialized and arranged in a linked list at link->dev.
355 */
356 sprintf(dev->node.dev_name, "sedlbauer");
357 dev->node.major = dev->node.minor = 0;
Dominik Brodowskifd238232006-03-05 10:45:09 +0100358 link->dev_node = &dev->node;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700359
360 /* Finally, report what we've done */
Dominik Brodowski70294b42006-01-15 12:43:16 +0100361 printk(KERN_INFO "%s: index 0x%02x:",
362 dev->node.dev_name, link->conf.ConfigIndex);
363 if (link->conf.Vpp)
364 printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 if (link->conf.Attributes & CONF_ENABLE_IRQ)
366 printk(", irq %d", link->irq.AssignedIRQ);
367 if (link->io.NumPorts1)
368 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
369 link->io.BasePort1+link->io.NumPorts1-1);
370 if (link->io.NumPorts2)
371 printk(" & 0x%04x-0x%04x", link->io.BasePort2,
372 link->io.BasePort2+link->io.NumPorts2-1);
373 if (link->win)
Dominik Brodowskiad913c12008-08-02 16:12:00 +0200374 printk(", mem 0x%06lx-0x%06lx", req->Base,
375 req->Base+req->Size-1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700376 printk("\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700377
378 icard.para[0] = link->irq.AssignedIRQ;
379 icard.para[1] = link->io.BasePort1;
380 icard.protocol = protocol;
381 icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
382
383 last_ret = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->stop), &icard);
384 if (last_ret < 0) {
385 printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
386 last_ret, link->io.BasePort1);
387 sedlbauer_release(link);
Dominik Brodowski15b99ac2006-03-31 17:26:06 +0200388 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700389 } else
390 ((local_info_t*)link->priv)->cardnr = last_ret;
391
Dominik Brodowski15b99ac2006-03-31 17:26:06 +0200392 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700393
394cs_failed:
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200395 cs_error(link, last_fn, last_ret);
Dominik Brodowski5fcd4da2008-07-29 08:38:55 +0200396failed:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700397 sedlbauer_release(link);
Dominik Brodowski15b99ac2006-03-31 17:26:06 +0200398 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700399
400} /* sedlbauer_config */
401
402/*======================================================================
403
404 After a card is removed, sedlbauer_release() will unregister the
405 device, and release the PCMCIA configuration. If the device is
406 still open, this will be postponed until it is closed.
407
408======================================================================*/
409
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200410static void sedlbauer_release(struct pcmcia_device *link)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700411{
412 local_info_t *local = link->priv;
413 DEBUG(0, "sedlbauer_release(0x%p)\n", link);
414
415 if (local) {
416 if (local->cardnr >= 0) {
417 /* no unregister function with hisax */
418 HiSax_closecard(local->cardnr);
419 }
420 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700421
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200422 pcmcia_disable_device(link);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700423} /* sedlbauer_release */
424
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200425static int sedlbauer_suspend(struct pcmcia_device *link)
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100426{
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100427 local_info_t *dev = link->priv;
428
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100429 dev->stop = 1;
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100430
431 return 0;
432}
433
Dominik Brodowskifba395e2006-03-31 17:21:06 +0200434static int sedlbauer_resume(struct pcmcia_device *link)
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100435{
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100436 local_info_t *dev = link->priv;
437
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100438 dev->stop = 0;
439
440 return 0;
441}
442
Linus Torvalds1da177e2005-04-16 15:20:36 -0700443
Dominik Brodowski70799732005-06-27 16:28:41 -0700444static struct pcmcia_device_id sedlbauer_ids[] = {
Karsten Keil84d370b2005-09-14 14:19:13 -0700445 PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "speed star II", "V 3.1", 0x81fb79f5, 0xf3612e1d, 0x6b95c78a),
Dominik Brodowski70799732005-06-27 16:28:41 -0700446 PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D67", 0x81fb79f5, 0xe4e9bc12, 0x397b7e90),
447 PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D98", 0x81fb79f5, 0xe4e9bc12, 0x2e5c7fce),
448 PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (C) 93-94 VK", 0x81fb79f5, 0xe4e9bc12, 0x8db143fe),
449 PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (c) 93-95 VK", 0x81fb79f5, 0xe4e9bc12, 0xb391ab4c),
450 PCMCIA_DEVICE_PROD_ID12("HST High Soft Tech GmbH", "Saphir II B", 0xd79e0b84, 0x21d083ae),
451/* PCMCIA_DEVICE_PROD_ID1234("SEDLBAUER", 0x81fb79f5), */ /* too generic*/
452 PCMCIA_DEVICE_NULL
453};
454MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids);
455
Linus Torvalds1da177e2005-04-16 15:20:36 -0700456static struct pcmcia_driver sedlbauer_driver = {
457 .owner = THIS_MODULE,
458 .drv = {
459 .name = "sedlbauer_cs",
460 },
Dominik Brodowski15b99ac2006-03-31 17:26:06 +0200461 .probe = sedlbauer_probe,
Dominik Brodowskicc3b4862005-11-14 21:23:14 +0100462 .remove = sedlbauer_detach,
Dominik Brodowski70799732005-06-27 16:28:41 -0700463 .id_table = sedlbauer_ids,
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100464 .suspend = sedlbauer_suspend,
465 .resume = sedlbauer_resume,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466};
467
468static int __init init_sedlbauer_cs(void)
469{
470 return pcmcia_register_driver(&sedlbauer_driver);
471}
472
473static void __exit exit_sedlbauer_cs(void)
474{
475 pcmcia_unregister_driver(&sedlbauer_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476}
477
478module_init(init_sedlbauer_cs);
479module_exit(exit_sedlbauer_cs);