blob: 871c0d5cfc3dd4c0a9e811efafa0a5d08e6bce38 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/****************************************************************************/
2
3/*
4 * anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
5 *
6 * (C) Copyright 2000, Moreton Bay (www.moreton.com.au)
7 */
8
9/****************************************************************************/
10#ifndef anchor_h
11#define anchor_h
12/****************************************************************************/
13
14/*
15 * Define basic addressing info.
16 */
Greg Ungerered65fa12005-11-02 14:56:46 +100017#if defined(CONFIG_M5407C3)
Linus Torvalds1da177e2005-04-16 15:20:36 -070018#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */
19#define COMEM_IRQ 25 /* IRQ of anchor part */
20#else
21#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */
22#define COMEM_IRQ 25 /* IRQ of anchor part */
23#endif
24
25/****************************************************************************/
26
27/*
28 * 4-byte registers of CO-MEM, so adjust register addresses for
29 * easy access. Handy macro for word access too.
30 */
31#define LREG(a) ((a) >> 2)
32#define WREG(a) ((a) >> 1)
33
34
35/*
36 * Define base addresses within CO-MEM Lite register address space.
37 */
38#define COMEM_I2O 0x0000 /* I2O registers */
39#define COMEM_OPREGS 0x0400 /* Operation registers */
40#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */
41#define COMEM_SHMEM 0x4000 /* Shared memory region */
42
43#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */
44
45
46/*
47 * Define CO-MEM Registers.
48 */
49#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */
50#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */
51#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */
52#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */
53#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */
54#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */
55#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */
56#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */
57
58#define COMEM_DAHBASE 0x0460 /* Direct access base address */
59
60#define COMEM_NVCMD 0x04a0 /* I2C serial command */
61#define COMEM_NVREAD 0x04a4 /* I2C serial read */
62#define COMEM_NVSTAT 0x04a8 /* I2C status */
63
64#define COMEM_DMALBASE 0x04b0 /* DMA local base address */
65#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */
66#define COMEM_DMASIZE 0x04b8 /* DMA size */
67#define COMEM_DMACTL 0x04bc /* DMA control */
68
69#define COMEM_HCTL 0x04e0 /* Host control */
70#define COMEM_HINT 0x04e4 /* Host interrupt control/status */
71#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */
72#define COMEM_LINT 0x04f4 /* Local interrupt contole status */
73#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */
74
75#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */
76
77
78/*
79 * Commands and flags for use with Direct Access Register.
80 */
81#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */
82#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */
83#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */
84#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */
85#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */
86#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */
87#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */
88#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */
89
90#define COMEM_DA_ADDR(a) ((a) & 0xffffe000)
91
92#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff)
93
94
95/*
96 * The PCI bus will be limited in what slots will actually be used.
97 * Define valid device numbers for different boards.
98 */
Greg Ungerered65fa12005-11-02 14:56:46 +100099#if defined(CONFIG_M5407C3)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100#define COMEM_MINDEV 14 /* Minimum valid DEVICE */
101#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */
102#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */
103#else
104#define COMEM_MINDEV 0 /* Minimum valid DEVICE */
105#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */
106#endif
107
108#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */
109
110
111/****************************************************************************/
112#endif /* anchor_h */