blob: 4ba9432709f3cbaf845b62417e0c8ff5f17507b9 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Multimedia Video device configuration
3#
4
Jan Engelhardtc5da5af2007-05-02 10:06:23 -03005menuconfig RADIO_ADAPTERS
6 bool "Radio Adapters"
Mauro Carvalho Chehab057596e2008-02-02 11:25:31 -03007 depends on VIDEO_V4L2
Jan Engelhardtc5da5af2007-05-02 10:06:23 -03008 default y
Mauro Carvalho Chehabff016522007-05-02 15:14:06 -03009 ---help---
10 Say Y here to enable selecting AM/FM radio adapters.
Jan Engelhardtc5da5af2007-05-02 10:06:23 -030011
Mauro Carvalho Chehab057596e2008-02-02 11:25:31 -030012if RADIO_ADAPTERS && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070013
14config RADIO_CADET
15 tristate "ADS Cadet AM/FM Tuner"
Hans J. Kochc0c7fa02006-08-08 09:10:12 -030016 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070017 ---help---
18 Choose Y here if you have one of these AM/FM radio cards, and then
19 fill in the port address below.
20
21 In order to control your radio card, you will need to use programs
22 that are compatible with the Video For Linux API. Information on
23 this API and pointers to "v4l" programs may be found at
24 <file:Documentation/video4linux/API.html>.
25
26 Further documentation on this driver can be found on the WWW at
27 <http://linux.blackhawke.net/cadet/>.
28
29 To compile this driver as a module, choose M here: the
30 module will be called radio-cadet.
31
32config RADIO_RTRACK
33 tristate "AIMSlab RadioTrack (aka RadioReveal) support"
Mauro Carvalho Chehab46ff2c72006-08-08 09:10:01 -030034 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070035 ---help---
36 Choose Y here if you have one of these FM radio cards, and then fill
37 in the port address below.
38
39 Note that newer AIMSlab RadioTrack cards have a different chipset
40 and are not supported by this driver. For these cards, use the
41 RadioTrack II driver below.
42
43 If you have a GemTeks combined (PnP) sound- and radio card you must
44 use this driver as a module and setup the card with isapnptools.
45 You must also pass the module a suitable io parameter, 0x248 has
46 been reported to be used by these cards.
47
48 In order to control your radio card, you will need to use programs
49 that are compatible with the Video For Linux API. Information on
50 this API and pointers to "v4l" programs may be found at
51 <file:Documentation/video4linux/API.html>. More information is
52 contained in the file
53 <file:Documentation/video4linux/radiotrack.txt>.
54
55 To compile this driver as a module, choose M here: the
56 module will be called radio-aimslab.
57
58config RADIO_RTRACK_PORT
59 hex "RadioTrack i/o port (0x20f or 0x30f)"
60 depends on RADIO_RTRACK=y
61 default "20f"
62 help
63 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
64 haven't changed the jumper setting on the card.
65
66config RADIO_RTRACK2
67 tristate "AIMSlab RadioTrack II support"
Mauro Carvalho Chehabf8c559f2006-08-08 09:10:02 -030068 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 ---help---
70 Choose Y here if you have this FM radio card, and then fill in the
71 port address below.
72
73 In order to control your radio card, you will need to use programs
74 that are compatible with the Video For Linux API. Information on
75 this API and pointers to "v4l" programs may be found at
76 <file:Documentation/video4linux/API.html>.
77
78 To compile this driver as a module, choose M here: the
79 module will be called radio-rtrack2.
80
81config RADIO_RTRACK2_PORT
82 hex "RadioTrack II i/o port (0x20c or 0x30c)"
83 depends on RADIO_RTRACK2=y
84 default "30c"
85 help
86 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
87 haven't changed the jumper setting on the card.
88
89config RADIO_AZTECH
90 tristate "Aztech/Packard Bell Radio"
Mauro Carvalho Chehaba4366af2006-08-08 09:10:01 -030091 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -070092 ---help---
93 Choose Y here if you have one of these FM radio cards, and then fill
94 in the port address below.
95
96 In order to control your radio card, you will need to use programs
97 that are compatible with the Video For Linux API. Information on
98 this API and pointers to "v4l" programs may be found at
99 <file:Documentation/video4linux/API.html>.
100
101 To compile this driver as a module, choose M here: the
102 module will be called radio-aztech.
103
104config RADIO_AZTECH_PORT
105 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
106 depends on RADIO_AZTECH=y
107 default "350"
108 help
109 Enter either 0x350 or 0x358 here. The card default is 0x350, if you
110 haven't changed the setting of jumper JP3 on the card. Removing the
111 jumper sets the card to 0x358.
112
113config RADIO_GEMTEK
Pekka Seppanen3e7589c2007-09-30 21:49:01 -0300114 tristate "GemTek Radio card (or compatible) support"
Mauro Carvalho Chehabd1c4ecd2006-08-08 09:10:01 -0300115 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116 ---help---
117 Choose Y here if you have this FM radio card, and then fill in the
Pekka Seppanen3e7589c2007-09-30 21:49:01 -0300118 I/O port address and settings below. The following cards either have
119 GemTek Radio tuner or are rebranded GemTek Radio cards:
120
121 - Sound Vision 16 Gold with FM Radio
122 - Typhoon Radio card (some models)
123 - Hama Radio card
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124
125 In order to control your radio card, you will need to use programs
126 that are compatible with the Video For Linux API. Information on
127 this API and pointers to "v4l" programs may be found at
128 <file:Documentation/video4linux/API.html>.
129
130 To compile this driver as a module, choose M here: the
131 module will be called radio-gemtek.
132
133config RADIO_GEMTEK_PORT
Pekka Seppanen3e7589c2007-09-30 21:49:01 -0300134 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135 depends on RADIO_GEMTEK=y
136 default "34c"
137 help
138 Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
139 0x34c, if you haven't changed the jumper setting on the card. On
140 Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
Pekka Seppanen3e7589c2007-09-30 21:49:01 -0300141 port is 0x20c, 0x248 or 0x28c.
142 If automatic I/O port probing is enabled this port will be used only
143 in case of automatic probing failure, ie. as a fallback.
144
145config RADIO_GEMTEK_PROBE
146 bool "Automatic I/O port probing"
147 depends on RADIO_GEMTEK=y
148 default y
149 help
150 Say Y here to enable automatic probing for GemTek Radio card. The
151 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
152 0x28c.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154config RADIO_MAXIRADIO
155 tristate "Guillemot MAXI Radio FM 2000 radio"
Mauro Carvalho Chehabe84fef62006-08-08 09:10:05 -0300156 depends on VIDEO_V4L2 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157 ---help---
158 Choose Y here if you have this radio card. This card may also be
159 found as Gemtek PCI FM.
160
161 In order to control your radio card, you will need to use programs
162 that are compatible with the Video For Linux API. Information on
163 this API and pointers to "v4l" programs may be found at
164 <file:Documentation/video4linux/API.html>.
165
166 To compile this driver as a module, choose M here: the
167 module will be called radio-maxiradio.
168
Krzysztof Helt8366fc32009-11-27 11:24:13 +0100169config RADIO_MIROPCM20
170 tristate "miroSOUND PCM20 radio"
Ralf Baechle4756fc62011-06-24 10:30:09 -0300171 depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
Randy Dunlapdd7cdb82009-12-08 09:13:07 -0800172 select SND_ISA
Krzysztof Helt8366fc32009-11-27 11:24:13 +0100173 select SND_MIRO
174 ---help---
175 Choose Y here if you have this FM radio card. You also need to enable
176 the ALSA sound system. This choice automatically selects the ALSA
177 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
178 is required for the radio-miropcm20.
179
180 In order to control your radio card, you will need to use programs
181 that are compatible with the Video For Linux API. Information on
182 this API and pointers to "v4l" programs may be found at
183 <file:Documentation/video4linux/API.html>.
184
185 To compile this driver as a module, choose M here: the
186 module will be called radio-miropcm20.
187
Linus Torvalds1da177e2005-04-16 15:20:36 -0700188config RADIO_SF16FMI
Ondrej Zary4b830372009-12-10 17:06:44 -0300189 tristate "SF16-FMI/SF16-FMP Radio"
Mauro Carvalho Chehaba2ef73a2006-08-08 09:10:02 -0300190 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700191 ---help---
Ondrej Zary67cabf52009-12-10 17:12:32 -0300192 Choose Y here if you have one of these FM radio cards.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193
194 In order to control your radio card, you will need to use programs
195 that are compatible with the Video For Linux API. Information on
196 this API and pointers to "v4l" programs may be found at
197 <file:Documentation/video4linux/API.html>.
198
199 To compile this driver as a module, choose M here: the
200 module will be called radio-sf16fmi.
201
202config RADIO_SF16FMR2
203 tristate "SF16FMR2 Radio"
Randy Dunlap42a741d2011-06-30 14:31:04 -0300204 depends on ISA && VIDEO_V4L2 && SND
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205 ---help---
206 Choose Y here if you have one of these FM radio cards.
207
208 In order to control your radio card, you will need to use programs
209 that are compatible with the Video For Linux API. Information on
210 this API and pointers to "v4l" programs may be found on the WWW at
211 <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
212
213 To compile this driver as a module, choose M here: the
214 module will be called radio-sf16fmr2.
215
216config RADIO_TERRATEC
217 tristate "TerraTec ActiveRadio ISA Standalone"
Mauro Carvalho Chehab55ac7b62006-08-08 09:10:03 -0300218 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700219 ---help---
220 Choose Y here if you have this FM radio card, and then fill in the
221 port address below. (TODO)
222
223 Note: This driver is in its early stages. Right now volume and
224 frequency control and muting works at least for me, but
225 unfortunately I have not found anybody who wants to use this card
226 with Linux. So if it is this what YOU are trying to do right now,
227 PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>.
228
229 In order to control your radio card, you will need to use programs
230 that are compatible with the Video For Linux API. Information on
231 this API and pointers to "v4l" programs may be found at
232 <file:Documentation/video4linux/API.html>.
233
234 To compile this driver as a module, choose M here: the
235 module will be called radio-terratec.
236
237config RADIO_TERRATEC_PORT
238 hex "Terratec i/o port (normally 0x590)"
239 depends on RADIO_TERRATEC=y
240 default "590"
241 help
242 Fill in the I/O port of your TerraTec FM radio card. If unsure, go
243 with the default.
244
245config RADIO_TRUST
246 tristate "Trust FM radio card"
Mauro Carvalho Chehab982eddb2006-08-08 09:10:05 -0300247 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700248 help
249 This is a driver for the Trust FM radio cards. Say Y if you have
250 such a card and want to use it under Linux.
251
252 To compile this driver as a module, choose M here: the
253 module will be called radio-trust.
254
255config RADIO_TRUST_PORT
256 hex "Trust i/o port (usually 0x350 or 0x358)"
257 depends on RADIO_TRUST=y
258 default "350"
259 help
260 Enter the I/O port of your Trust FM radio card. If unsure, try the
261 values "0x350" or "0x358".
262
263config RADIO_TYPHOON
264 tristate "Typhoon Radio (a.k.a. EcoRadio)"
Mauro Carvalho Chehab30c48302006-08-08 09:10:04 -0300265 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266 ---help---
267 Choose Y here if you have one of these FM radio cards, and then fill
268 in the port address and the frequency used for muting below.
269
270 In order to control your radio card, you will need to use programs
271 that are compatible with the Video For Linux API. Information on
272 this API and pointers to "v4l" programs may be found at
273 <file:Documentation/video4linux/API.html>.
274
275 To compile this driver as a module, choose M here: the
276 module will be called radio-typhoon.
277
Linus Torvalds1da177e2005-04-16 15:20:36 -0700278config RADIO_TYPHOON_PORT
279 hex "Typhoon I/O port (0x316 or 0x336)"
280 depends on RADIO_TYPHOON=y
281 default "316"
282 help
283 Enter the I/O port of your Typhoon or EcoRadio radio card.
284
285config RADIO_TYPHOON_MUTEFREQ
286 int "Typhoon frequency set when muting the device (kHz)"
287 depends on RADIO_TYPHOON=y
288 default "87500"
289 help
290 Enter the frequency used for muting the radio. The device is never
291 completely silent. If the volume is just turned down, you can still
292 hear silent voices and music. For that reason, the frequency of the
293 radio device is set to the frequency you can enter here whenever
294 the device is muted. There should be no local radio station at that
295 frequency.
296
297config RADIO_ZOLTRIX
298 tristate "Zoltrix Radio"
Mauro Carvalho Chehab2ab65292006-08-08 09:10:04 -0300299 depends on ISA && VIDEO_V4L2
Linus Torvalds1da177e2005-04-16 15:20:36 -0700300 ---help---
301 Choose Y here if you have one of these FM radio cards, and then fill
302 in the port address below.
303
304 In order to control your radio card, you will need to use programs
305 that are compatible with the Video For Linux API. Information on
306 this API and pointers to "v4l" programs may be found at
307 <file:Documentation/video4linux/API.html>.
308
309 To compile this driver as a module, choose M here: the
310 module will be called radio-zoltrix.
311
312config RADIO_ZOLTRIX_PORT
313 hex "ZOLTRIX I/O port (0x20c or 0x30c)"
314 depends on RADIO_ZOLTRIX=y
315 default "20c"
316 help
317 Enter the I/O port of your Zoltrix radio card.
318
Hans Verkuil9c9dbed2009-08-08 09:00:37 -0300319config I2C_SI4713
320 tristate "I2C driver for Silicon Labs Si4713 device"
321 depends on I2C && VIDEO_V4L2
322 ---help---
323 Say Y here if you want support to Si4713 I2C device.
324 This device driver supports only i2c bus.
325
326 To compile this driver as a module, choose M here: the
327 module will be called si4713.
328
329config RADIO_SI4713
330 tristate "Silicon Labs Si4713 FM Radio Transmitter support"
331 depends on I2C && VIDEO_V4L2
332 select I2C_SI4713
333 ---help---
334 Say Y here if you want support to Si4713 FM Radio Transmitter.
335 This device can transmit audio through FM. It can transmit
Matti J. Aaltonen7a254f42009-09-17 23:46:18 -0300336 RDS and RBDS signals as well. This module is the v4l2 radio
Hans Verkuil9c9dbed2009-08-08 09:00:37 -0300337 interface for the i2c driver of this device.
338
339 To compile this driver as a module, choose M here: the
340 module will be called radio-si4713.
341
Mauro Carvalho Chehab7fb65292006-08-08 15:47:31 -0300342config USB_DSBR
Douglas Schilling Landgrafb31c33bd2007-07-02 23:16:17 -0300343 tristate "D-Link/GemTek USB FM radio support"
344 depends on USB && VIDEO_V4L2
Mauro Carvalho Chehab7fb65292006-08-08 15:47:31 -0300345 ---help---
346 Say Y here if you want to connect this type of radio to your
347 computer's USB port. Note that the audio is not digital, and
348 you must connect the line out connector to a sound card or a
349 set of speakers.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700350
Mauro Carvalho Chehab7fb65292006-08-08 15:47:31 -0300351 To compile this driver as a module, choose M here: the
352 module will be called dsbr100.
Jan Engelhardtc5da5af2007-05-02 10:06:23 -0300353
Joonyoung Shimb09cd162009-08-09 14:22:20 -0300354config RADIO_SI470X
355 bool "Silicon Labs Si470x FM Radio Receiver support"
356 depends on VIDEO_V4L2
Tobias Lorenz6aadf822008-10-28 08:48:27 -0300357
Joonyoung Shimb09cd162009-08-09 14:22:20 -0300358source "drivers/media/radio/si470x/Kconfig"
Tobias Lorenz78656ac2008-01-14 21:55:27 -0300359
Alexey Klimov2aa72f32008-10-01 09:40:59 -0300360config USB_MR800
361 tristate "AverMedia MR 800 USB FM radio support"
362 depends on USB && VIDEO_V4L2
363 ---help---
364 Say Y here if you want to connect this type of radio to your
365 computer's USB port. Note that the audio is not digital, and
366 you must connect the line out connector to a sound card or a
367 set of speakers.
368
369 To compile this driver as a module, choose M here: the
370 module will be called radio-mr800.
371
Fabio Belavenuto46a60cf2008-12-30 19:27:09 -0300372config RADIO_TEA5764
373 tristate "TEA5764 I2C FM radio support"
374 depends on I2C && VIDEO_V4L2
375 ---help---
376 Say Y here if you want to use the TEA5764 FM chip found in
377 EZX phones. This FM chip is present in EZX phones from Motorola,
378 connected to internal pxa I2C bus.
379
380 To compile this driver as a module, choose M here: the
381 module will be called radio-tea5764.
382
383config RADIO_TEA5764_XTAL
384 bool "TEA5764 crystal reference"
385 depends on RADIO_TEA5764=y
386 default y
387 help
388 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
389 here if TEA5764 reference frequency is connected in FREQIN.
390
Richard Röjforsee4b9db2010-02-02 19:40:49 -0300391config RADIO_SAA7706H
392 tristate "SAA7706H Car Radio DSP"
393 depends on I2C && VIDEO_V4L2
394 ---help---
395 Say Y here if you want to use the SAA7706H Car radio Digital
396 Signal Processor, found for instance on the Russellville development
397 board. On the russellville the device is connected to internal
398 timberdale I2C bus.
399
400 To compile this driver as a module, choose M here: the
401 module will be called SAA7706H.
402
Richard Röjforseea85b02009-09-22 10:14:39 -0300403config RADIO_TEF6862
404 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
405 depends on I2C && VIDEO_V4L2
406 ---help---
407 Say Y here if you want to use the TEF6862 Car Radio Enhanced
408 Selectivity Tuner, found for instance on the Russellville development
409 board. On the russellville the device is connected to internal
410 timberdale I2C bus.
411
412 To compile this driver as a module, choose M here: the
413 module will be called TEF6862.
414
Richard Röjforsd44d1f32010-02-03 12:59:39 -0300415config RADIO_TIMBERDALE
416 tristate "Enable the Timberdale radio driver"
417 depends on MFD_TIMBERDALE && VIDEO_V4L2
Randy Dunlap53600442010-02-12 18:02:35 -0300418 depends on I2C # for RADIO_SAA7706H
Richard Röjforsd44d1f32010-02-03 12:59:39 -0300419 select RADIO_TEF6862
420 select RADIO_SAA7706H
421 ---help---
422 This is a kind of umbrella driver for the Radio Tuner and DSP
423 found behind the Timberdale FPGA on the Russellville board.
424 Enabling this driver will automatically select the DSP and tuner.
425
Matti Aaltonen87d1a502010-12-10 11:41:34 -0300426config RADIO_WL1273
427 tristate "Texas Instruments WL1273 I2C FM Radio"
428 depends on I2C && VIDEO_V4L2
Randy Dunlap1b149bb2011-02-27 14:51:54 -0300429 select MFD_CORE
Matti Aaltonen87d1a502010-12-10 11:41:34 -0300430 select MFD_WL1273_CORE
431 select FW_LOADER
432 ---help---
433 Choose Y here if you have this FM radio chip.
434
435 In order to control your radio card, you will need to use programs
436 that are compatible with the Video For Linux 2 API. Information on
437 this API and pointers to "v4l2" programs may be found at
438 <file:Documentation/video4linux/API.html>.
439
440 To compile this driver as a module, choose M here: the
441 module will be called radio-wl1273.
442
Manjunatha Halli57f05bf2011-01-24 02:26:59 -0300443# TI's ST based wl128x FM radio
444source "drivers/media/radio/wl128x/Kconfig"
445
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700446config RADIO_TAVARUA
447 tristate "Qualcomm Tavaraua I2C FM support"
448 depends on I2C && VIDEO_V4L2 && MARIMBA_CORE
449 default n
450 ---help---
451 Say Y here if you want to use the Qualcomm FM chip (Tavarua).
452 This FM chip uses I2C interface.
453
454 To compile this driver as a module, choose M here: the
455 module will be called radio-tavarua.
456
457config RADIO_IRIS
458 tristate "Qualcomm IRIS FM support"
459 depends on VIDEO_V4L2
460 default n
461 ---help---
462 Say Y here if you want to use the Qualcomm FM chip (IRIS).
463 This FM chip uses SMD interface
464
465 To compile this driver as a module, choose M here: the
466 module will be called radio-iris.
467
468
469config RADIO_IRIS_TRANSPORT
470 tristate "Qualcomm IRIS Transport"
471 depends on RADIO_IRIS
472 default n
473 ---help---
474 Say Y here if you want to use the Qualcomm FM chip (IRIS).
475 with SMD as transport.
476
477 To compile this driver as a module, choose M here: the
478 module will be called radio-iris-transport.
479
Jan Engelhardtc5da5af2007-05-02 10:06:23 -0300480endif # RADIO_ADAPTERS