Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 1 | /* |
| 2 | * Sonics Silicon Backplane |
| 3 | * Broadcom PCI-core driver |
| 4 | * |
| 5 | * Copyright 2005, Broadcom Corporation |
| 6 | * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> |
| 7 | * |
| 8 | * Licensed under the GNU/GPL. See COPYING for details. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/ssb/ssb.h> |
| 12 | #include <linux/pci.h> |
| 13 | #include <linux/delay.h> |
Michael Buesch | 7cb4461 | 2008-02-19 17:46:48 +0100 | [diff] [blame] | 14 | #include <linux/ssb/ssb_embedded.h> |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 15 | |
| 16 | #include "ssb_private.h" |
| 17 | |
Rafał Miłecki | ccc7c28 | 2011-04-01 13:26:52 +0200 | [diff] [blame] | 18 | static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address); |
| 19 | static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data); |
| 20 | static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address); |
| 21 | static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, |
| 22 | u8 address, u16 data); |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 23 | |
| 24 | static inline |
| 25 | u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) |
| 26 | { |
| 27 | return ssb_read32(pc->dev, offset); |
| 28 | } |
| 29 | |
| 30 | static inline |
| 31 | void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value) |
| 32 | { |
| 33 | ssb_write32(pc->dev, offset, value); |
| 34 | } |
| 35 | |
Michael Buesch | 7cb4461 | 2008-02-19 17:46:48 +0100 | [diff] [blame] | 36 | static inline |
| 37 | u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset) |
| 38 | { |
| 39 | return ssb_read16(pc->dev, offset); |
| 40 | } |
| 41 | |
| 42 | static inline |
| 43 | void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value) |
| 44 | { |
| 45 | ssb_write16(pc->dev, offset, value); |
| 46 | } |
| 47 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 48 | /************************************************** |
| 49 | * Code for hostmode operation. |
| 50 | **************************************************/ |
| 51 | |
| 52 | #ifdef CONFIG_SSB_PCICORE_HOSTMODE |
| 53 | |
| 54 | #include <asm/paccess.h> |
| 55 | /* Probe a 32bit value on the bus and catch bus exceptions. |
| 56 | * Returns nonzero on a bus exception. |
| 57 | * This is MIPS specific */ |
| 58 | #define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) |
| 59 | |
| 60 | /* Assume one-hot slot wiring */ |
| 61 | #define SSB_PCI_SLOT_MAX 16 |
| 62 | |
| 63 | /* Global lock is OK, as we won't have more than one extpci anyway. */ |
| 64 | static DEFINE_SPINLOCK(cfgspace_lock); |
| 65 | /* Core to access the external PCI config space. Can only have one. */ |
| 66 | static struct ssb_pcicore *extpci_core; |
| 67 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 68 | |
| 69 | static u32 get_cfgspace_addr(struct ssb_pcicore *pc, |
| 70 | unsigned int bus, unsigned int dev, |
| 71 | unsigned int func, unsigned int off) |
| 72 | { |
| 73 | u32 addr = 0; |
| 74 | u32 tmp; |
| 75 | |
Michael Buesch | 7cb4461 | 2008-02-19 17:46:48 +0100 | [diff] [blame] | 76 | /* We do only have one cardbus device behind the bridge. */ |
| 77 | if (pc->cardbusmode && (dev >= 1)) |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 78 | goto out; |
Michael Buesch | 7cb4461 | 2008-02-19 17:46:48 +0100 | [diff] [blame] | 79 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 80 | if (bus == 0) { |
| 81 | /* Type 0 transaction */ |
| 82 | if (unlikely(dev >= SSB_PCI_SLOT_MAX)) |
| 83 | goto out; |
| 84 | /* Slide the window */ |
| 85 | tmp = SSB_PCICORE_SBTOPCI_CFG0; |
| 86 | tmp |= ((1 << (dev + 16)) & SSB_PCICORE_SBTOPCI1_MASK); |
| 87 | pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, tmp); |
| 88 | /* Calculate the address */ |
| 89 | addr = SSB_PCI_CFG; |
| 90 | addr |= ((1 << (dev + 16)) & ~SSB_PCICORE_SBTOPCI1_MASK); |
| 91 | addr |= (func << 8); |
| 92 | addr |= (off & ~3); |
| 93 | } else { |
| 94 | /* Type 1 transaction */ |
| 95 | pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, |
| 96 | SSB_PCICORE_SBTOPCI_CFG1); |
| 97 | /* Calculate the address */ |
| 98 | addr = SSB_PCI_CFG; |
| 99 | addr |= (bus << 16); |
| 100 | addr |= (dev << 11); |
| 101 | addr |= (func << 8); |
| 102 | addr |= (off & ~3); |
| 103 | } |
| 104 | out: |
| 105 | return addr; |
| 106 | } |
| 107 | |
| 108 | static int ssb_extpci_read_config(struct ssb_pcicore *pc, |
| 109 | unsigned int bus, unsigned int dev, |
| 110 | unsigned int func, unsigned int off, |
| 111 | void *buf, int len) |
| 112 | { |
| 113 | int err = -EINVAL; |
| 114 | u32 addr, val; |
| 115 | void __iomem *mmio; |
| 116 | |
| 117 | SSB_WARN_ON(!pc->hostmode); |
| 118 | if (unlikely(len != 1 && len != 2 && len != 4)) |
| 119 | goto out; |
| 120 | addr = get_cfgspace_addr(pc, bus, dev, func, off); |
| 121 | if (unlikely(!addr)) |
| 122 | goto out; |
| 123 | err = -ENOMEM; |
| 124 | mmio = ioremap_nocache(addr, len); |
| 125 | if (!mmio) |
| 126 | goto out; |
| 127 | |
| 128 | if (mips_busprobe32(val, mmio)) { |
| 129 | val = 0xffffffff; |
| 130 | goto unmap; |
| 131 | } |
| 132 | |
| 133 | val = readl(mmio); |
| 134 | val >>= (8 * (off & 3)); |
| 135 | |
| 136 | switch (len) { |
| 137 | case 1: |
| 138 | *((u8 *)buf) = (u8)val; |
| 139 | break; |
| 140 | case 2: |
| 141 | *((u16 *)buf) = (u16)val; |
| 142 | break; |
| 143 | case 4: |
| 144 | *((u32 *)buf) = (u32)val; |
| 145 | break; |
| 146 | } |
| 147 | err = 0; |
| 148 | unmap: |
| 149 | iounmap(mmio); |
| 150 | out: |
| 151 | return err; |
| 152 | } |
| 153 | |
| 154 | static int ssb_extpci_write_config(struct ssb_pcicore *pc, |
| 155 | unsigned int bus, unsigned int dev, |
| 156 | unsigned int func, unsigned int off, |
| 157 | const void *buf, int len) |
| 158 | { |
| 159 | int err = -EINVAL; |
| 160 | u32 addr, val = 0; |
| 161 | void __iomem *mmio; |
| 162 | |
| 163 | SSB_WARN_ON(!pc->hostmode); |
| 164 | if (unlikely(len != 1 && len != 2 && len != 4)) |
| 165 | goto out; |
| 166 | addr = get_cfgspace_addr(pc, bus, dev, func, off); |
| 167 | if (unlikely(!addr)) |
| 168 | goto out; |
| 169 | err = -ENOMEM; |
| 170 | mmio = ioremap_nocache(addr, len); |
| 171 | if (!mmio) |
| 172 | goto out; |
| 173 | |
| 174 | if (mips_busprobe32(val, mmio)) { |
| 175 | val = 0xffffffff; |
| 176 | goto unmap; |
| 177 | } |
| 178 | |
| 179 | switch (len) { |
| 180 | case 1: |
| 181 | val = readl(mmio); |
| 182 | val &= ~(0xFF << (8 * (off & 3))); |
| 183 | val |= *((const u8 *)buf) << (8 * (off & 3)); |
| 184 | break; |
| 185 | case 2: |
| 186 | val = readl(mmio); |
| 187 | val &= ~(0xFFFF << (8 * (off & 3))); |
| 188 | val |= *((const u16 *)buf) << (8 * (off & 3)); |
| 189 | break; |
| 190 | case 4: |
| 191 | val = *((const u32 *)buf); |
| 192 | break; |
| 193 | } |
| 194 | writel(val, mmio); |
| 195 | |
| 196 | err = 0; |
| 197 | unmap: |
| 198 | iounmap(mmio); |
| 199 | out: |
| 200 | return err; |
| 201 | } |
| 202 | |
| 203 | static int ssb_pcicore_read_config(struct pci_bus *bus, unsigned int devfn, |
| 204 | int reg, int size, u32 *val) |
| 205 | { |
| 206 | unsigned long flags; |
| 207 | int err; |
| 208 | |
| 209 | spin_lock_irqsave(&cfgspace_lock, flags); |
| 210 | err = ssb_extpci_read_config(extpci_core, bus->number, PCI_SLOT(devfn), |
| 211 | PCI_FUNC(devfn), reg, val, size); |
| 212 | spin_unlock_irqrestore(&cfgspace_lock, flags); |
| 213 | |
| 214 | return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; |
| 215 | } |
| 216 | |
| 217 | static int ssb_pcicore_write_config(struct pci_bus *bus, unsigned int devfn, |
| 218 | int reg, int size, u32 val) |
| 219 | { |
| 220 | unsigned long flags; |
| 221 | int err; |
| 222 | |
| 223 | spin_lock_irqsave(&cfgspace_lock, flags); |
| 224 | err = ssb_extpci_write_config(extpci_core, bus->number, PCI_SLOT(devfn), |
| 225 | PCI_FUNC(devfn), reg, &val, size); |
| 226 | spin_unlock_irqrestore(&cfgspace_lock, flags); |
| 227 | |
| 228 | return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; |
| 229 | } |
| 230 | |
| 231 | static struct pci_ops ssb_pcicore_pciops = { |
| 232 | .read = ssb_pcicore_read_config, |
| 233 | .write = ssb_pcicore_write_config, |
| 234 | }; |
| 235 | |
| 236 | static struct resource ssb_pcicore_mem_resource = { |
| 237 | .name = "SSB PCIcore external memory", |
| 238 | .start = SSB_PCI_DMA, |
| 239 | .end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1, |
Michael Buesch | fc71acc | 2008-02-16 18:13:36 +0100 | [diff] [blame] | 240 | .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED, |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 241 | }; |
| 242 | |
| 243 | static struct resource ssb_pcicore_io_resource = { |
| 244 | .name = "SSB PCIcore external I/O", |
| 245 | .start = 0x100, |
| 246 | .end = 0x7FF, |
Michael Buesch | fc71acc | 2008-02-16 18:13:36 +0100 | [diff] [blame] | 247 | .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED, |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 248 | }; |
| 249 | |
| 250 | static struct pci_controller ssb_pcicore_controller = { |
| 251 | .pci_ops = &ssb_pcicore_pciops, |
| 252 | .io_resource = &ssb_pcicore_io_resource, |
| 253 | .mem_resource = &ssb_pcicore_mem_resource, |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 254 | }; |
| 255 | |
Michael Buesch | aab547c | 2008-02-29 11:36:12 +0100 | [diff] [blame] | 256 | /* This function is called when doing a pci_enable_device(). |
| 257 | * We must first check if the device is a device on the PCI-core bridge. */ |
| 258 | int ssb_pcicore_plat_dev_init(struct pci_dev *d) |
| 259 | { |
Michael Buesch | aab547c | 2008-02-29 11:36:12 +0100 | [diff] [blame] | 260 | if (d->bus->ops != &ssb_pcicore_pciops) { |
| 261 | /* This is not a device on the PCI-core bridge. */ |
| 262 | return -ENODEV; |
| 263 | } |
| 264 | |
| 265 | ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", |
| 266 | pci_name(d)); |
| 267 | |
Michael Buesch | aab547c | 2008-02-29 11:36:12 +0100 | [diff] [blame] | 268 | /* Fix up interrupt lines */ |
| 269 | d->irq = ssb_mips_irq(extpci_core->dev) + 2; |
| 270 | pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); |
| 271 | |
| 272 | return 0; |
| 273 | } |
| 274 | |
| 275 | /* Early PCI fixup for a device on the PCI-core bridge. */ |
| 276 | static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev) |
| 277 | { |
| 278 | u8 lat; |
| 279 | |
| 280 | if (dev->bus->ops != &ssb_pcicore_pciops) { |
| 281 | /* This is not a device on the PCI-core bridge. */ |
| 282 | return; |
| 283 | } |
| 284 | if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) |
| 285 | return; |
| 286 | |
| 287 | ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); |
| 288 | |
| 289 | /* Enable PCI bridge bus mastering and memory space */ |
| 290 | pci_set_master(dev); |
| 291 | if (pcibios_enable_device(dev, ~0) < 0) { |
| 292 | ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); |
| 293 | return; |
| 294 | } |
| 295 | |
| 296 | /* Enable PCI bridge BAR1 prefetch and burst */ |
| 297 | pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); |
| 298 | |
| 299 | /* Make sure our latency is high enough to handle the devices behind us */ |
| 300 | lat = 168; |
| 301 | ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", |
| 302 | pci_name(dev), lat); |
| 303 | pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); |
| 304 | } |
| 305 | DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); |
| 306 | |
| 307 | /* PCI device IRQ mapping. */ |
| 308 | int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| 309 | { |
| 310 | if (dev->bus->ops != &ssb_pcicore_pciops) { |
| 311 | /* This is not a device on the PCI-core bridge. */ |
| 312 | return -ENODEV; |
| 313 | } |
| 314 | return ssb_mips_irq(extpci_core->dev) + 2; |
| 315 | } |
| 316 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 317 | static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) |
| 318 | { |
| 319 | u32 val; |
| 320 | |
| 321 | if (WARN_ON(extpci_core)) |
| 322 | return; |
| 323 | extpci_core = pc; |
| 324 | |
| 325 | ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n"); |
| 326 | /* Reset devices on the external PCI bus */ |
| 327 | val = SSB_PCICORE_CTL_RST_OE; |
| 328 | val |= SSB_PCICORE_CTL_CLK_OE; |
| 329 | pcicore_write32(pc, SSB_PCICORE_CTL, val); |
| 330 | val |= SSB_PCICORE_CTL_CLK; /* Clock on */ |
| 331 | pcicore_write32(pc, SSB_PCICORE_CTL, val); |
| 332 | udelay(150); /* Assertion time demanded by the PCI standard */ |
| 333 | val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */ |
| 334 | pcicore_write32(pc, SSB_PCICORE_CTL, val); |
| 335 | val = SSB_PCICORE_ARBCTL_INTERN; |
| 336 | pcicore_write32(pc, SSB_PCICORE_ARBCTL, val); |
| 337 | udelay(1); /* Assertion time demanded by the PCI standard */ |
| 338 | |
Michael Buesch | 7cb4461 | 2008-02-19 17:46:48 +0100 | [diff] [blame] | 339 | if (pc->dev->bus->has_cardbus_slot) { |
| 340 | ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n"); |
| 341 | pc->cardbusmode = 1; |
| 342 | /* GPIO 1 resets the bridge */ |
| 343 | ssb_gpio_out(pc->dev->bus, 1, 1); |
| 344 | ssb_gpio_outen(pc->dev->bus, 1, 1); |
| 345 | pcicore_write16(pc, SSB_PCICORE_SPROM(0), |
| 346 | pcicore_read16(pc, SSB_PCICORE_SPROM(0)) |
| 347 | | 0x0400); |
| 348 | } |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 349 | |
| 350 | /* 64MB I/O window */ |
| 351 | pcicore_write32(pc, SSB_PCICORE_SBTOPCI0, |
| 352 | SSB_PCICORE_SBTOPCI_IO); |
| 353 | /* 64MB config space */ |
| 354 | pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, |
| 355 | SSB_PCICORE_SBTOPCI_CFG0); |
| 356 | /* 1GB memory window */ |
| 357 | pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, |
| 358 | SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA); |
| 359 | |
| 360 | /* Enable PCI bridge BAR0 prefetch and burst */ |
| 361 | val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; |
| 362 | ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2); |
| 363 | /* Clear error conditions */ |
| 364 | val = 0; |
| 365 | ssb_extpci_write_config(pc, 0, 0, 0, PCI_STATUS, &val, 2); |
| 366 | |
| 367 | /* Enable PCI interrupts */ |
| 368 | pcicore_write32(pc, SSB_PCICORE_IMASK, |
| 369 | SSB_PCICORE_IMASK_INTA); |
| 370 | |
| 371 | /* Ok, ready to run, register it to the system. |
| 372 | * The following needs change, if we want to port hostmode |
| 373 | * to non-MIPS platform. */ |
Michael Buesch | fc71acc | 2008-02-16 18:13:36 +0100 | [diff] [blame] | 374 | ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000); |
| 375 | set_io_port_base(ssb_pcicore_controller.io_map_base); |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 376 | /* Give some time to the PCI controller to configure itself with the new |
| 377 | * values. Not waiting at this point causes crashes of the machine. */ |
| 378 | mdelay(10); |
| 379 | register_pci_controller(&ssb_pcicore_controller); |
| 380 | } |
| 381 | |
| 382 | static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) |
| 383 | { |
| 384 | struct ssb_bus *bus = pc->dev->bus; |
| 385 | u16 chipid_top; |
| 386 | u32 tmp; |
| 387 | |
| 388 | chipid_top = (bus->chip_id & 0xFF00); |
| 389 | if (chipid_top != 0x4700 && |
| 390 | chipid_top != 0x5300) |
| 391 | return 0; |
| 392 | |
Aurelien Jarno | 2d8d4fd | 2008-02-28 15:11:26 +0100 | [diff] [blame] | 393 | if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 394 | return 0; |
| 395 | |
| 396 | /* The 200-pin BCM4712 package does not bond out PCI. Even when |
| 397 | * PCI is bonded out, some boards may leave the pins floating. */ |
| 398 | if (bus->chip_id == 0x4712) { |
| 399 | if (bus->chip_package == SSB_CHIPPACK_BCM4712S) |
| 400 | return 0; |
| 401 | if (bus->chip_package == SSB_CHIPPACK_BCM4712M) |
| 402 | return 0; |
| 403 | } |
| 404 | if (bus->chip_id == 0x5350) |
| 405 | return 0; |
| 406 | |
| 407 | return !mips_busprobe32(tmp, (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE))); |
| 408 | } |
| 409 | #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ |
| 410 | |
Rafał Miłecki | ccc7c28 | 2011-04-01 13:26:52 +0200 | [diff] [blame] | 411 | /************************************************** |
| 412 | * Workarounds. |
| 413 | **************************************************/ |
| 414 | |
Rafał Miłecki | af335a6 | 2011-04-27 18:21:34 +0200 | [diff] [blame] | 415 | static void ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc) |
| 416 | { |
| 417 | u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0)); |
| 418 | if (((tmp & 0xF000) >> 12) != pc->dev->core_index) { |
| 419 | tmp &= ~0xF000; |
| 420 | tmp |= (pc->dev->core_index << 12); |
| 421 | pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp); |
| 422 | } |
| 423 | } |
| 424 | |
Rafał Miłecki | ccc7c28 | 2011-04-01 13:26:52 +0200 | [diff] [blame] | 425 | static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc) |
| 426 | { |
| 427 | return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; |
| 428 | } |
| 429 | |
| 430 | static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc) |
| 431 | { |
| 432 | const u8 serdes_pll_device = 0x1D; |
| 433 | const u8 serdes_rx_device = 0x1F; |
| 434 | u16 tmp; |
| 435 | |
| 436 | ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, |
| 437 | ssb_pcicore_polarity_workaround(pc)); |
| 438 | tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); |
| 439 | if (tmp & 0x4000) |
| 440 | ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); |
| 441 | } |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 442 | |
Rafał Miłecki | 6e91410 | 2011-04-27 17:39:47 +0200 | [diff] [blame] | 443 | static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc) |
| 444 | { |
| 445 | struct ssb_device *pdev = pc->dev; |
| 446 | struct ssb_bus *bus = pdev->bus; |
| 447 | u32 tmp; |
| 448 | |
| 449 | tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); |
| 450 | tmp |= SSB_PCICORE_SBTOPCI_PREF; |
| 451 | tmp |= SSB_PCICORE_SBTOPCI_BURST; |
| 452 | pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); |
| 453 | |
| 454 | if (pdev->id.revision < 5) { |
| 455 | tmp = ssb_read32(pdev, SSB_IMCFGLO); |
| 456 | tmp &= ~SSB_IMCFGLO_SERTO; |
| 457 | tmp |= 2; |
| 458 | tmp &= ~SSB_IMCFGLO_REQTO; |
| 459 | tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; |
| 460 | ssb_write32(pdev, SSB_IMCFGLO, tmp); |
| 461 | ssb_commit_settings(bus); |
| 462 | } else if (pdev->id.revision >= 11) { |
| 463 | tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); |
| 464 | tmp |= SSB_PCICORE_SBTOPCI_MRM; |
| 465 | pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); |
| 466 | } |
| 467 | } |
| 468 | |
| 469 | static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) |
| 470 | { |
Rafał Miłecki | 6e91410 | 2011-04-27 17:39:47 +0200 | [diff] [blame] | 471 | u32 tmp; |
Rafał Miłecki | 5890a3c | 2011-04-27 17:39:48 +0200 | [diff] [blame] | 472 | u8 rev = pc->dev->id.revision; |
Rafał Miłecki | 6e91410 | 2011-04-27 17:39:47 +0200 | [diff] [blame] | 473 | |
Rafał Miłecki | 5890a3c | 2011-04-27 17:39:48 +0200 | [diff] [blame] | 474 | if (rev == 0 || rev == 1) { |
Rafał Miłecki | 6e91410 | 2011-04-27 17:39:47 +0200 | [diff] [blame] | 475 | /* TLP Workaround register. */ |
| 476 | tmp = ssb_pcie_read(pc, 0x4); |
| 477 | tmp |= 0x8; |
| 478 | ssb_pcie_write(pc, 0x4, tmp); |
| 479 | } |
Rafał Miłecki | 5890a3c | 2011-04-27 17:39:48 +0200 | [diff] [blame] | 480 | if (rev == 1) { |
| 481 | /* DLLP Link Control register. */ |
| 482 | tmp = ssb_pcie_read(pc, 0x100); |
| 483 | tmp |= 0x40; |
| 484 | ssb_pcie_write(pc, 0x100, tmp); |
| 485 | } |
| 486 | |
| 487 | if (rev == 0) { |
Rafał Miłecki | 6e91410 | 2011-04-27 17:39:47 +0200 | [diff] [blame] | 488 | const u8 serdes_rx_device = 0x1F; |
| 489 | |
| 490 | ssb_pcie_mdio_write(pc, serdes_rx_device, |
| 491 | 2 /* Timer */, 0x8128); |
| 492 | ssb_pcie_mdio_write(pc, serdes_rx_device, |
| 493 | 6 /* CDR */, 0x0100); |
| 494 | ssb_pcie_mdio_write(pc, serdes_rx_device, |
| 495 | 7 /* CDR BW */, 0x1466); |
Rafał Miłecki | 5890a3c | 2011-04-27 17:39:48 +0200 | [diff] [blame] | 496 | } else if (rev == 3 || rev == 4 || rev == 5) { |
| 497 | /* TODO: DLLP Power Management Threshold */ |
| 498 | ssb_pcicore_serdes_workaround(pc); |
| 499 | /* TODO: ASPM */ |
| 500 | } else if (rev == 7) { |
| 501 | /* TODO: No PLL down */ |
| 502 | } |
| 503 | |
| 504 | if (rev >= 6) { |
| 505 | /* Miscellaneous Configuration Fixup */ |
| 506 | tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5)); |
| 507 | if (!(tmp & 0x8000)) |
| 508 | pcicore_write16(pc, SSB_PCICORE_SPROM(5), |
| 509 | tmp | 0x8000); |
Rafał Miłecki | 6e91410 | 2011-04-27 17:39:47 +0200 | [diff] [blame] | 510 | } |
| 511 | } |
| 512 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 513 | /************************************************** |
| 514 | * Generic and Clientmode operation code. |
| 515 | **************************************************/ |
| 516 | |
| 517 | static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) |
| 518 | { |
Rafał Miłecki | 6ae8ec2 | 2011-07-05 17:25:32 +0200 | [diff] [blame] | 519 | ssb_pcicore_fix_sprom_core_index(pc); |
| 520 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 521 | /* Disable PCI interrupts. */ |
| 522 | ssb_write32(pc->dev, SSB_INTVEC, 0); |
Rafał Miłecki | 6ae8ec2 | 2011-07-05 17:25:32 +0200 | [diff] [blame] | 523 | |
| 524 | /* Additional PCIe always once-executed workarounds */ |
| 525 | if (pc->dev->id.coreid == SSB_DEV_PCIE) { |
| 526 | ssb_pcicore_serdes_workaround(pc); |
| 527 | /* TODO: ASPM */ |
| 528 | /* TODO: Clock Request Update */ |
| 529 | } |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 530 | } |
| 531 | |
| 532 | void ssb_pcicore_init(struct ssb_pcicore *pc) |
| 533 | { |
| 534 | struct ssb_device *dev = pc->dev; |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 535 | |
| 536 | if (!dev) |
| 537 | return; |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 538 | if (!ssb_device_is_enabled(dev)) |
| 539 | ssb_device_enable(dev, 0); |
| 540 | |
| 541 | #ifdef CONFIG_SSB_PCICORE_HOSTMODE |
| 542 | pc->hostmode = pcicore_is_in_hostmode(pc); |
| 543 | if (pc->hostmode) |
| 544 | ssb_pcicore_init_hostmode(pc); |
| 545 | #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ |
| 546 | if (!pc->hostmode) |
| 547 | ssb_pcicore_init_clientmode(pc); |
| 548 | } |
| 549 | |
| 550 | static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address) |
| 551 | { |
| 552 | pcicore_write32(pc, 0x130, address); |
| 553 | return pcicore_read32(pc, 0x134); |
| 554 | } |
| 555 | |
| 556 | static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data) |
| 557 | { |
| 558 | pcicore_write32(pc, 0x130, address); |
| 559 | pcicore_write32(pc, 0x134, data); |
| 560 | } |
| 561 | |
Rafał Miłecki | 1b1c7ac | 2011-04-01 12:07:33 +0200 | [diff] [blame] | 562 | static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy) |
| 563 | { |
| 564 | const u16 mdio_control = 0x128; |
| 565 | const u16 mdio_data = 0x12C; |
| 566 | u32 v; |
| 567 | int i; |
| 568 | |
| 569 | v = (1 << 30); /* Start of Transaction */ |
| 570 | v |= (1 << 28); /* Write Transaction */ |
| 571 | v |= (1 << 17); /* Turnaround */ |
| 572 | v |= (0x1F << 18); |
| 573 | v |= (phy << 4); |
| 574 | pcicore_write32(pc, mdio_data, v); |
| 575 | |
| 576 | udelay(10); |
| 577 | for (i = 0; i < 200; i++) { |
| 578 | v = pcicore_read32(pc, mdio_control); |
| 579 | if (v & 0x100 /* Trans complete */) |
| 580 | break; |
| 581 | msleep(1); |
| 582 | } |
| 583 | } |
| 584 | |
Rafał Miłecki | ba91d1a | 2011-04-01 12:07:34 +0200 | [diff] [blame] | 585 | static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) |
| 586 | { |
| 587 | const u16 mdio_control = 0x128; |
| 588 | const u16 mdio_data = 0x12C; |
| 589 | int max_retries = 10; |
| 590 | u16 ret = 0; |
| 591 | u32 v; |
| 592 | int i; |
| 593 | |
| 594 | v = 0x80; /* Enable Preamble Sequence */ |
| 595 | v |= 0x2; /* MDIO Clock Divisor */ |
| 596 | pcicore_write32(pc, mdio_control, v); |
| 597 | |
| 598 | if (pc->dev->id.revision >= 10) { |
| 599 | max_retries = 200; |
| 600 | ssb_pcie_mdio_set_phy(pc, device); |
| 601 | } |
| 602 | |
| 603 | v = (1 << 30); /* Start of Transaction */ |
| 604 | v |= (1 << 29); /* Read Transaction */ |
| 605 | v |= (1 << 17); /* Turnaround */ |
| 606 | if (pc->dev->id.revision < 10) |
| 607 | v |= (u32)device << 22; |
| 608 | v |= (u32)address << 18; |
| 609 | pcicore_write32(pc, mdio_data, v); |
| 610 | /* Wait for the device to complete the transaction */ |
| 611 | udelay(10); |
Rafał Miłecki | 9be1cb3 | 2011-04-19 22:40:22 +0200 | [diff] [blame] | 612 | for (i = 0; i < max_retries; i++) { |
Rafał Miłecki | ba91d1a | 2011-04-01 12:07:34 +0200 | [diff] [blame] | 613 | v = pcicore_read32(pc, mdio_control); |
| 614 | if (v & 0x100 /* Trans complete */) { |
| 615 | udelay(10); |
| 616 | ret = pcicore_read32(pc, mdio_data); |
| 617 | break; |
| 618 | } |
| 619 | msleep(1); |
| 620 | } |
| 621 | pcicore_write32(pc, mdio_control, 0); |
| 622 | return ret; |
| 623 | } |
Rafał Miłecki | ba91d1a | 2011-04-01 12:07:34 +0200 | [diff] [blame] | 624 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 625 | static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, |
| 626 | u8 address, u16 data) |
| 627 | { |
| 628 | const u16 mdio_control = 0x128; |
| 629 | const u16 mdio_data = 0x12C; |
Rafał Miłecki | 1b1c7ac | 2011-04-01 12:07:33 +0200 | [diff] [blame] | 630 | int max_retries = 10; |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 631 | u32 v; |
| 632 | int i; |
| 633 | |
| 634 | v = 0x80; /* Enable Preamble Sequence */ |
| 635 | v |= 0x2; /* MDIO Clock Divisor */ |
| 636 | pcicore_write32(pc, mdio_control, v); |
| 637 | |
Rafał Miłecki | 1b1c7ac | 2011-04-01 12:07:33 +0200 | [diff] [blame] | 638 | if (pc->dev->id.revision >= 10) { |
| 639 | max_retries = 200; |
| 640 | ssb_pcie_mdio_set_phy(pc, device); |
| 641 | } |
| 642 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 643 | v = (1 << 30); /* Start of Transaction */ |
| 644 | v |= (1 << 28); /* Write Transaction */ |
| 645 | v |= (1 << 17); /* Turnaround */ |
Rafał Miłecki | 1b1c7ac | 2011-04-01 12:07:33 +0200 | [diff] [blame] | 646 | if (pc->dev->id.revision < 10) |
| 647 | v |= (u32)device << 22; |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 648 | v |= (u32)address << 18; |
| 649 | v |= data; |
| 650 | pcicore_write32(pc, mdio_data, v); |
| 651 | /* Wait for the device to complete the transaction */ |
| 652 | udelay(10); |
Rafał Miłecki | 1b1c7ac | 2011-04-01 12:07:33 +0200 | [diff] [blame] | 653 | for (i = 0; i < max_retries; i++) { |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 654 | v = pcicore_read32(pc, mdio_control); |
| 655 | if (v & 0x100 /* Trans complete */) |
| 656 | break; |
| 657 | msleep(1); |
| 658 | } |
| 659 | pcicore_write32(pc, mdio_control, 0); |
| 660 | } |
| 661 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 662 | int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, |
| 663 | struct ssb_device *dev) |
| 664 | { |
| 665 | struct ssb_device *pdev = pc->dev; |
| 666 | struct ssb_bus *bus; |
| 667 | int err = 0; |
| 668 | u32 tmp; |
| 669 | |
Michael Buesch | 9e095a6 | 2008-07-04 23:44:37 +0200 | [diff] [blame] | 670 | if (dev->bus->bustype != SSB_BUSTYPE_PCI) { |
| 671 | /* This SSB device is not on a PCI host-bus. So the IRQs are |
| 672 | * not routed through the PCI core. |
| 673 | * So we must not enable routing through the PCI core. */ |
| 674 | goto out; |
| 675 | } |
| 676 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 677 | if (!pdev) |
| 678 | goto out; |
| 679 | bus = pdev->bus; |
| 680 | |
Michael Buesch | a3bafee | 2008-06-02 16:15:23 +0200 | [diff] [blame] | 681 | might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); |
| 682 | |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 683 | /* Enable interrupts for this device. */ |
Michael Buesch | 8b45499 | 2009-10-09 20:32:10 +0200 | [diff] [blame] | 684 | if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) { |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 685 | u32 coremask; |
| 686 | |
| 687 | /* Calculate the "coremask" for the device. */ |
| 688 | coremask = (1 << dev->core_index); |
| 689 | |
Michael Buesch | 8b45499 | 2009-10-09 20:32:10 +0200 | [diff] [blame] | 690 | SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI); |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 691 | err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); |
| 692 | if (err) |
| 693 | goto out; |
| 694 | tmp |= coremask << 8; |
| 695 | err = pci_write_config_dword(bus->host_pci, SSB_PCI_IRQMASK, tmp); |
| 696 | if (err) |
| 697 | goto out; |
| 698 | } else { |
| 699 | u32 intvec; |
| 700 | |
| 701 | intvec = ssb_read32(pdev, SSB_INTVEC); |
Michael Buesch | 51e8b88 | 2008-04-08 10:31:22 +0200 | [diff] [blame] | 702 | tmp = ssb_read32(dev, SSB_TPSFLAG); |
| 703 | tmp &= SSB_TPSFLAG_BPFLAG; |
| 704 | intvec |= (1 << tmp); |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 705 | ssb_write32(pdev, SSB_INTVEC, intvec); |
| 706 | } |
| 707 | |
| 708 | /* Setup PCIcore operation. */ |
| 709 | if (pc->setup_done) |
| 710 | goto out; |
| 711 | if (pdev->id.coreid == SSB_DEV_PCI) { |
Rafał Miłecki | 6e91410 | 2011-04-27 17:39:47 +0200 | [diff] [blame] | 712 | ssb_pcicore_pci_setup_workarounds(pc); |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 713 | } else { |
| 714 | WARN_ON(pdev->id.coreid != SSB_DEV_PCIE); |
Rafał Miłecki | 6e91410 | 2011-04-27 17:39:47 +0200 | [diff] [blame] | 715 | ssb_pcicore_pcie_setup_workarounds(pc); |
Michael Buesch | 61e115a | 2007-09-18 15:12:50 -0400 | [diff] [blame] | 716 | } |
| 717 | pc->setup_done = 1; |
| 718 | out: |
| 719 | return err; |
| 720 | } |
| 721 | EXPORT_SYMBOL(ssb_pcicore_dev_irqvecs_enable); |