Benoit Goby | 91525d0 | 2011-03-09 16:28:55 -0800 | [diff] [blame^] | 1 | /* |
| 2 | * arch/arm/mach-tegra/usb_phy.c |
| 3 | * |
| 4 | * Copyright (C) 2010 Google, Inc. |
| 5 | * |
| 6 | * Author: |
| 7 | * Erik Gilling <konkers@google.com> |
| 8 | * Benoit Goby <benoit@android.com> |
| 9 | * |
| 10 | * This software is licensed under the terms of the GNU General Public |
| 11 | * License version 2, as published by the Free Software Foundation, and |
| 12 | * may be copied, distributed, and modified under those terms. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | */ |
| 20 | |
| 21 | #include <linux/resource.h> |
| 22 | #include <linux/delay.h> |
| 23 | #include <linux/slab.h> |
| 24 | #include <linux/err.h> |
| 25 | #include <linux/platform_device.h> |
| 26 | #include <linux/io.h> |
| 27 | #include <linux/gpio.h> |
| 28 | #include <linux/usb/otg.h> |
| 29 | #include <linux/usb/ulpi.h> |
| 30 | #include <asm/mach-types.h> |
| 31 | #include <mach/usb_phy.h> |
| 32 | #include <mach/iomap.h> |
| 33 | |
| 34 | #define ULPI_VIEWPORT 0x170 |
| 35 | |
| 36 | #define USB_PORTSC1 0x184 |
| 37 | #define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) |
| 38 | #define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26) |
| 39 | #define USB_PORTSC1_PHCD (1 << 23) |
| 40 | #define USB_PORTSC1_WKOC (1 << 22) |
| 41 | #define USB_PORTSC1_WKDS (1 << 21) |
| 42 | #define USB_PORTSC1_WKCN (1 << 20) |
| 43 | #define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16) |
| 44 | #define USB_PORTSC1_PP (1 << 12) |
| 45 | #define USB_PORTSC1_SUSP (1 << 7) |
| 46 | #define USB_PORTSC1_PE (1 << 2) |
| 47 | #define USB_PORTSC1_CCS (1 << 0) |
| 48 | |
| 49 | #define USB_SUSP_CTRL 0x400 |
| 50 | #define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) |
| 51 | #define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) |
| 52 | #define USB_SUSP_CLR (1 << 5) |
| 53 | #define USB_PHY_CLK_VALID (1 << 7) |
| 54 | #define UTMIP_RESET (1 << 11) |
| 55 | #define UHSIC_RESET (1 << 11) |
| 56 | #define UTMIP_PHY_ENABLE (1 << 12) |
| 57 | #define ULPI_PHY_ENABLE (1 << 13) |
| 58 | #define USB_SUSP_SET (1 << 14) |
| 59 | #define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) |
| 60 | |
| 61 | #define USB1_LEGACY_CTRL 0x410 |
| 62 | #define USB1_NO_LEGACY_MODE (1 << 0) |
| 63 | #define USB1_VBUS_SENSE_CTL_MASK (3 << 1) |
| 64 | #define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) |
| 65 | #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ |
| 66 | (1 << 1) |
| 67 | #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) |
| 68 | #define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) |
| 69 | |
| 70 | #define ULPI_TIMING_CTRL_0 0x424 |
| 71 | #define ULPI_OUTPUT_PINMUX_BYP (1 << 10) |
| 72 | #define ULPI_CLKOUT_PINMUX_BYP (1 << 11) |
| 73 | |
| 74 | #define ULPI_TIMING_CTRL_1 0x428 |
| 75 | #define ULPI_DATA_TRIMMER_LOAD (1 << 0) |
| 76 | #define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) |
| 77 | #define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) |
| 78 | #define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) |
| 79 | #define ULPI_DIR_TRIMMER_LOAD (1 << 24) |
| 80 | #define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) |
| 81 | |
| 82 | #define UTMIP_PLL_CFG1 0x804 |
| 83 | #define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) |
| 84 | #define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) |
| 85 | |
| 86 | #define UTMIP_XCVR_CFG0 0x808 |
| 87 | #define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) |
| 88 | #define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) |
| 89 | #define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) |
| 90 | #define UTMIP_FORCE_PD_POWERDOWN (1 << 14) |
| 91 | #define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) |
| 92 | #define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) |
| 93 | #define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25) |
| 94 | |
| 95 | #define UTMIP_BIAS_CFG0 0x80c |
| 96 | #define UTMIP_OTGPD (1 << 11) |
| 97 | #define UTMIP_BIASPD (1 << 10) |
| 98 | |
| 99 | #define UTMIP_HSRX_CFG0 0x810 |
| 100 | #define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) |
| 101 | #define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) |
| 102 | |
| 103 | #define UTMIP_HSRX_CFG1 0x814 |
| 104 | #define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) |
| 105 | |
| 106 | #define UTMIP_TX_CFG0 0x820 |
| 107 | #define UTMIP_FS_PREABMLE_J (1 << 19) |
| 108 | #define UTMIP_HS_DISCON_DISABLE (1 << 8) |
| 109 | |
| 110 | #define UTMIP_MISC_CFG0 0x824 |
| 111 | #define UTMIP_DPDM_OBSERVE (1 << 26) |
| 112 | #define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) |
| 113 | #define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) |
| 114 | #define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) |
| 115 | #define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) |
| 116 | #define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) |
| 117 | #define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) |
| 118 | |
| 119 | #define UTMIP_MISC_CFG1 0x828 |
| 120 | #define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) |
| 121 | #define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) |
| 122 | |
| 123 | #define UTMIP_DEBOUNCE_CFG0 0x82c |
| 124 | #define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) |
| 125 | |
| 126 | #define UTMIP_BAT_CHRG_CFG0 0x830 |
| 127 | #define UTMIP_PD_CHRG (1 << 0) |
| 128 | |
| 129 | #define UTMIP_SPARE_CFG0 0x834 |
| 130 | #define FUSE_SETUP_SEL (1 << 3) |
| 131 | |
| 132 | #define UTMIP_XCVR_CFG1 0x838 |
| 133 | #define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) |
| 134 | #define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) |
| 135 | #define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) |
| 136 | #define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) |
| 137 | |
| 138 | #define UTMIP_BIAS_CFG1 0x83c |
| 139 | #define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) |
| 140 | |
| 141 | static DEFINE_SPINLOCK(utmip_pad_lock); |
| 142 | static int utmip_pad_count; |
| 143 | |
| 144 | struct tegra_xtal_freq { |
| 145 | int freq; |
| 146 | u8 enable_delay; |
| 147 | u8 stable_count; |
| 148 | u8 active_delay; |
| 149 | u8 xtal_freq_count; |
| 150 | u16 debounce; |
| 151 | }; |
| 152 | |
| 153 | static const struct tegra_xtal_freq tegra_freq_table[] = { |
| 154 | { |
| 155 | .freq = 12000000, |
| 156 | .enable_delay = 0x02, |
| 157 | .stable_count = 0x2F, |
| 158 | .active_delay = 0x04, |
| 159 | .xtal_freq_count = 0x76, |
| 160 | .debounce = 0x7530, |
| 161 | }, |
| 162 | { |
| 163 | .freq = 13000000, |
| 164 | .enable_delay = 0x02, |
| 165 | .stable_count = 0x33, |
| 166 | .active_delay = 0x05, |
| 167 | .xtal_freq_count = 0x7F, |
| 168 | .debounce = 0x7EF4, |
| 169 | }, |
| 170 | { |
| 171 | .freq = 19200000, |
| 172 | .enable_delay = 0x03, |
| 173 | .stable_count = 0x4B, |
| 174 | .active_delay = 0x06, |
| 175 | .xtal_freq_count = 0xBB, |
| 176 | .debounce = 0xBB80, |
| 177 | }, |
| 178 | { |
| 179 | .freq = 26000000, |
| 180 | .enable_delay = 0x04, |
| 181 | .stable_count = 0x66, |
| 182 | .active_delay = 0x09, |
| 183 | .xtal_freq_count = 0xFE, |
| 184 | .debounce = 0xFDE8, |
| 185 | }, |
| 186 | }; |
| 187 | |
| 188 | static struct tegra_utmip_config utmip_default[] = { |
| 189 | [0] = { |
| 190 | .hssync_start_delay = 9, |
| 191 | .idle_wait_delay = 17, |
| 192 | .elastic_limit = 16, |
| 193 | .term_range_adj = 6, |
| 194 | .xcvr_setup = 9, |
| 195 | .xcvr_lsfslew = 1, |
| 196 | .xcvr_lsrslew = 1, |
| 197 | }, |
| 198 | [2] = { |
| 199 | .hssync_start_delay = 9, |
| 200 | .idle_wait_delay = 17, |
| 201 | .elastic_limit = 16, |
| 202 | .term_range_adj = 6, |
| 203 | .xcvr_setup = 9, |
| 204 | .xcvr_lsfslew = 2, |
| 205 | .xcvr_lsrslew = 2, |
| 206 | }, |
| 207 | }; |
| 208 | |
| 209 | static inline bool phy_is_ulpi(struct tegra_usb_phy *phy) |
| 210 | { |
| 211 | return (phy->instance == 1); |
| 212 | } |
| 213 | |
| 214 | static int utmip_pad_open(struct tegra_usb_phy *phy) |
| 215 | { |
| 216 | phy->pad_clk = clk_get_sys("utmip-pad", NULL); |
| 217 | if (IS_ERR(phy->pad_clk)) { |
| 218 | pr_err("%s: can't get utmip pad clock\n", __func__); |
| 219 | return PTR_ERR(phy->pad_clk); |
| 220 | } |
| 221 | |
| 222 | if (phy->instance == 0) { |
| 223 | phy->pad_regs = phy->regs; |
| 224 | } else { |
| 225 | phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); |
| 226 | if (!phy->pad_regs) { |
| 227 | pr_err("%s: can't remap usb registers\n", __func__); |
| 228 | clk_put(phy->pad_clk); |
| 229 | return -ENOMEM; |
| 230 | } |
| 231 | } |
| 232 | return 0; |
| 233 | } |
| 234 | |
| 235 | static void utmip_pad_close(struct tegra_usb_phy *phy) |
| 236 | { |
| 237 | if (phy->instance != 0) |
| 238 | iounmap(phy->pad_regs); |
| 239 | clk_put(phy->pad_clk); |
| 240 | } |
| 241 | |
| 242 | static void utmip_pad_power_on(struct tegra_usb_phy *phy) |
| 243 | { |
| 244 | unsigned long val, flags; |
| 245 | void __iomem *base = phy->pad_regs; |
| 246 | |
| 247 | clk_enable(phy->pad_clk); |
| 248 | |
| 249 | spin_lock_irqsave(&utmip_pad_lock, flags); |
| 250 | |
| 251 | if (utmip_pad_count++ == 0) { |
| 252 | val = readl(base + UTMIP_BIAS_CFG0); |
| 253 | val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); |
| 254 | writel(val, base + UTMIP_BIAS_CFG0); |
| 255 | } |
| 256 | |
| 257 | spin_unlock_irqrestore(&utmip_pad_lock, flags); |
| 258 | |
| 259 | clk_disable(phy->pad_clk); |
| 260 | } |
| 261 | |
| 262 | static int utmip_pad_power_off(struct tegra_usb_phy *phy) |
| 263 | { |
| 264 | unsigned long val, flags; |
| 265 | void __iomem *base = phy->pad_regs; |
| 266 | |
| 267 | if (!utmip_pad_count) { |
| 268 | pr_err("%s: utmip pad already powered off\n", __func__); |
| 269 | return -EINVAL; |
| 270 | } |
| 271 | |
| 272 | clk_enable(phy->pad_clk); |
| 273 | |
| 274 | spin_lock_irqsave(&utmip_pad_lock, flags); |
| 275 | |
| 276 | if (--utmip_pad_count == 0) { |
| 277 | val = readl(base + UTMIP_BIAS_CFG0); |
| 278 | val |= UTMIP_OTGPD | UTMIP_BIASPD; |
| 279 | writel(val, base + UTMIP_BIAS_CFG0); |
| 280 | } |
| 281 | |
| 282 | spin_unlock_irqrestore(&utmip_pad_lock, flags); |
| 283 | |
| 284 | clk_disable(phy->pad_clk); |
| 285 | |
| 286 | return 0; |
| 287 | } |
| 288 | |
| 289 | static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) |
| 290 | { |
| 291 | unsigned long timeout = 2000; |
| 292 | do { |
| 293 | if ((readl(reg) & mask) == result) |
| 294 | return 0; |
| 295 | udelay(1); |
| 296 | timeout--; |
| 297 | } while (timeout); |
| 298 | return -1; |
| 299 | } |
| 300 | |
| 301 | static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) |
| 302 | { |
| 303 | unsigned long val; |
| 304 | void __iomem *base = phy->regs; |
| 305 | |
| 306 | if (phy->instance == 0) { |
| 307 | val = readl(base + USB_SUSP_CTRL); |
| 308 | val |= USB_SUSP_SET; |
| 309 | writel(val, base + USB_SUSP_CTRL); |
| 310 | |
| 311 | udelay(10); |
| 312 | |
| 313 | val = readl(base + USB_SUSP_CTRL); |
| 314 | val &= ~USB_SUSP_SET; |
| 315 | writel(val, base + USB_SUSP_CTRL); |
| 316 | } |
| 317 | |
| 318 | if (phy->instance == 2) { |
| 319 | val = readl(base + USB_PORTSC1); |
| 320 | val |= USB_PORTSC1_PHCD; |
| 321 | writel(val, base + USB_PORTSC1); |
| 322 | } |
| 323 | |
| 324 | if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) |
| 325 | pr_err("%s: timeout waiting for phy to stabilize\n", __func__); |
| 326 | } |
| 327 | |
| 328 | static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) |
| 329 | { |
| 330 | unsigned long val; |
| 331 | void __iomem *base = phy->regs; |
| 332 | |
| 333 | if (phy->instance == 0) { |
| 334 | val = readl(base + USB_SUSP_CTRL); |
| 335 | val |= USB_SUSP_CLR; |
| 336 | writel(val, base + USB_SUSP_CTRL); |
| 337 | |
| 338 | udelay(10); |
| 339 | |
| 340 | val = readl(base + USB_SUSP_CTRL); |
| 341 | val &= ~USB_SUSP_CLR; |
| 342 | writel(val, base + USB_SUSP_CTRL); |
| 343 | } |
| 344 | |
| 345 | if (phy->instance == 2) { |
| 346 | val = readl(base + USB_PORTSC1); |
| 347 | val &= ~USB_PORTSC1_PHCD; |
| 348 | writel(val, base + USB_PORTSC1); |
| 349 | } |
| 350 | |
| 351 | if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, |
| 352 | USB_PHY_CLK_VALID)) |
| 353 | pr_err("%s: timeout waiting for phy to stabilize\n", __func__); |
| 354 | } |
| 355 | |
| 356 | static int utmi_phy_power_on(struct tegra_usb_phy *phy) |
| 357 | { |
| 358 | unsigned long val; |
| 359 | void __iomem *base = phy->regs; |
| 360 | struct tegra_utmip_config *config = phy->config; |
| 361 | |
| 362 | val = readl(base + USB_SUSP_CTRL); |
| 363 | val |= UTMIP_RESET; |
| 364 | writel(val, base + USB_SUSP_CTRL); |
| 365 | |
| 366 | if (phy->instance == 0) { |
| 367 | val = readl(base + USB1_LEGACY_CTRL); |
| 368 | val |= USB1_NO_LEGACY_MODE; |
| 369 | writel(val, base + USB1_LEGACY_CTRL); |
| 370 | } |
| 371 | |
| 372 | val = readl(base + UTMIP_TX_CFG0); |
| 373 | val &= ~UTMIP_FS_PREABMLE_J; |
| 374 | writel(val, base + UTMIP_TX_CFG0); |
| 375 | |
| 376 | val = readl(base + UTMIP_HSRX_CFG0); |
| 377 | val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); |
| 378 | val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); |
| 379 | val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); |
| 380 | writel(val, base + UTMIP_HSRX_CFG0); |
| 381 | |
| 382 | val = readl(base + UTMIP_HSRX_CFG1); |
| 383 | val &= ~UTMIP_HS_SYNC_START_DLY(~0); |
| 384 | val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); |
| 385 | writel(val, base + UTMIP_HSRX_CFG1); |
| 386 | |
| 387 | val = readl(base + UTMIP_DEBOUNCE_CFG0); |
| 388 | val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); |
| 389 | val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); |
| 390 | writel(val, base + UTMIP_DEBOUNCE_CFG0); |
| 391 | |
| 392 | val = readl(base + UTMIP_MISC_CFG0); |
| 393 | val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; |
| 394 | writel(val, base + UTMIP_MISC_CFG0); |
| 395 | |
| 396 | val = readl(base + UTMIP_MISC_CFG1); |
| 397 | val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); |
| 398 | val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | |
| 399 | UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); |
| 400 | writel(val, base + UTMIP_MISC_CFG1); |
| 401 | |
| 402 | val = readl(base + UTMIP_PLL_CFG1); |
| 403 | val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); |
| 404 | val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | |
| 405 | UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); |
| 406 | writel(val, base + UTMIP_PLL_CFG1); |
| 407 | |
| 408 | if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { |
| 409 | val = readl(base + USB_SUSP_CTRL); |
| 410 | val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); |
| 411 | writel(val, base + USB_SUSP_CTRL); |
| 412 | } |
| 413 | |
| 414 | utmip_pad_power_on(phy); |
| 415 | |
| 416 | val = readl(base + UTMIP_XCVR_CFG0); |
| 417 | val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | |
| 418 | UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) | |
| 419 | UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) | |
| 420 | UTMIP_XCVR_HSSLEW_MSB(~0)); |
| 421 | val |= UTMIP_XCVR_SETUP(config->xcvr_setup); |
| 422 | val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); |
| 423 | val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); |
| 424 | writel(val, base + UTMIP_XCVR_CFG0); |
| 425 | |
| 426 | val = readl(base + UTMIP_XCVR_CFG1); |
| 427 | val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | |
| 428 | UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); |
| 429 | val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); |
| 430 | writel(val, base + UTMIP_XCVR_CFG1); |
| 431 | |
| 432 | val = readl(base + UTMIP_BAT_CHRG_CFG0); |
| 433 | val &= ~UTMIP_PD_CHRG; |
| 434 | writel(val, base + UTMIP_BAT_CHRG_CFG0); |
| 435 | |
| 436 | val = readl(base + UTMIP_BIAS_CFG1); |
| 437 | val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); |
| 438 | val |= UTMIP_BIAS_PDTRK_COUNT(0x5); |
| 439 | writel(val, base + UTMIP_BIAS_CFG1); |
| 440 | |
| 441 | if (phy->instance == 0) { |
| 442 | val = readl(base + UTMIP_SPARE_CFG0); |
| 443 | if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) |
| 444 | val &= ~FUSE_SETUP_SEL; |
| 445 | else |
| 446 | val |= FUSE_SETUP_SEL; |
| 447 | writel(val, base + UTMIP_SPARE_CFG0); |
| 448 | } |
| 449 | |
| 450 | if (phy->instance == 2) { |
| 451 | val = readl(base + USB_SUSP_CTRL); |
| 452 | val |= UTMIP_PHY_ENABLE; |
| 453 | writel(val, base + USB_SUSP_CTRL); |
| 454 | } |
| 455 | |
| 456 | val = readl(base + USB_SUSP_CTRL); |
| 457 | val &= ~UTMIP_RESET; |
| 458 | writel(val, base + USB_SUSP_CTRL); |
| 459 | |
| 460 | if (phy->instance == 0) { |
| 461 | val = readl(base + USB1_LEGACY_CTRL); |
| 462 | val &= ~USB1_VBUS_SENSE_CTL_MASK; |
| 463 | val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; |
| 464 | writel(val, base + USB1_LEGACY_CTRL); |
| 465 | |
| 466 | val = readl(base + USB_SUSP_CTRL); |
| 467 | val &= ~USB_SUSP_SET; |
| 468 | writel(val, base + USB_SUSP_CTRL); |
| 469 | } |
| 470 | |
| 471 | utmi_phy_clk_enable(phy); |
| 472 | |
| 473 | if (phy->instance == 2) { |
| 474 | val = readl(base + USB_PORTSC1); |
| 475 | val &= ~USB_PORTSC1_PTS(~0); |
| 476 | writel(val, base + USB_PORTSC1); |
| 477 | } |
| 478 | |
| 479 | return 0; |
| 480 | } |
| 481 | |
| 482 | static void utmi_phy_power_off(struct tegra_usb_phy *phy) |
| 483 | { |
| 484 | unsigned long val; |
| 485 | void __iomem *base = phy->regs; |
| 486 | |
| 487 | utmi_phy_clk_disable(phy); |
| 488 | |
| 489 | if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { |
| 490 | val = readl(base + USB_SUSP_CTRL); |
| 491 | val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); |
| 492 | val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); |
| 493 | writel(val, base + USB_SUSP_CTRL); |
| 494 | } |
| 495 | |
| 496 | val = readl(base + USB_SUSP_CTRL); |
| 497 | val |= UTMIP_RESET; |
| 498 | writel(val, base + USB_SUSP_CTRL); |
| 499 | |
| 500 | val = readl(base + UTMIP_BAT_CHRG_CFG0); |
| 501 | val |= UTMIP_PD_CHRG; |
| 502 | writel(val, base + UTMIP_BAT_CHRG_CFG0); |
| 503 | |
| 504 | val = readl(base + UTMIP_XCVR_CFG0); |
| 505 | val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | |
| 506 | UTMIP_FORCE_PDZI_POWERDOWN; |
| 507 | writel(val, base + UTMIP_XCVR_CFG0); |
| 508 | |
| 509 | val = readl(base + UTMIP_XCVR_CFG1); |
| 510 | val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | |
| 511 | UTMIP_FORCE_PDDR_POWERDOWN; |
| 512 | writel(val, base + UTMIP_XCVR_CFG1); |
| 513 | |
| 514 | utmip_pad_power_off(phy); |
| 515 | } |
| 516 | |
| 517 | static void utmi_phy_preresume(struct tegra_usb_phy *phy) |
| 518 | { |
| 519 | unsigned long val; |
| 520 | void __iomem *base = phy->regs; |
| 521 | |
| 522 | val = readl(base + UTMIP_TX_CFG0); |
| 523 | val |= UTMIP_HS_DISCON_DISABLE; |
| 524 | writel(val, base + UTMIP_TX_CFG0); |
| 525 | } |
| 526 | |
| 527 | static void utmi_phy_postresume(struct tegra_usb_phy *phy) |
| 528 | { |
| 529 | unsigned long val; |
| 530 | void __iomem *base = phy->regs; |
| 531 | |
| 532 | val = readl(base + UTMIP_TX_CFG0); |
| 533 | val &= ~UTMIP_HS_DISCON_DISABLE; |
| 534 | writel(val, base + UTMIP_TX_CFG0); |
| 535 | } |
| 536 | |
| 537 | static void utmi_phy_restore_start(struct tegra_usb_phy *phy, |
| 538 | enum tegra_usb_phy_port_speed port_speed) |
| 539 | { |
| 540 | unsigned long val; |
| 541 | void __iomem *base = phy->regs; |
| 542 | |
| 543 | val = readl(base + UTMIP_MISC_CFG0); |
| 544 | val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); |
| 545 | if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) |
| 546 | val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; |
| 547 | else |
| 548 | val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; |
| 549 | writel(val, base + UTMIP_MISC_CFG0); |
| 550 | udelay(1); |
| 551 | |
| 552 | val = readl(base + UTMIP_MISC_CFG0); |
| 553 | val |= UTMIP_DPDM_OBSERVE; |
| 554 | writel(val, base + UTMIP_MISC_CFG0); |
| 555 | udelay(10); |
| 556 | } |
| 557 | |
| 558 | static void utmi_phy_restore_end(struct tegra_usb_phy *phy) |
| 559 | { |
| 560 | unsigned long val; |
| 561 | void __iomem *base = phy->regs; |
| 562 | |
| 563 | val = readl(base + UTMIP_MISC_CFG0); |
| 564 | val &= ~UTMIP_DPDM_OBSERVE; |
| 565 | writel(val, base + UTMIP_MISC_CFG0); |
| 566 | udelay(10); |
| 567 | } |
| 568 | |
| 569 | static int ulpi_phy_power_on(struct tegra_usb_phy *phy) |
| 570 | { |
| 571 | int ret; |
| 572 | unsigned long val; |
| 573 | void __iomem *base = phy->regs; |
| 574 | struct tegra_ulpi_config *config = phy->config; |
| 575 | |
| 576 | gpio_direction_output(config->reset_gpio, 0); |
| 577 | msleep(5); |
| 578 | gpio_direction_output(config->reset_gpio, 1); |
| 579 | |
| 580 | clk_enable(phy->clk); |
| 581 | msleep(1); |
| 582 | |
| 583 | val = readl(base + USB_SUSP_CTRL); |
| 584 | val |= UHSIC_RESET; |
| 585 | writel(val, base + USB_SUSP_CTRL); |
| 586 | |
| 587 | val = readl(base + ULPI_TIMING_CTRL_0); |
| 588 | val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; |
| 589 | writel(val, base + ULPI_TIMING_CTRL_0); |
| 590 | |
| 591 | val = readl(base + USB_SUSP_CTRL); |
| 592 | val |= ULPI_PHY_ENABLE; |
| 593 | writel(val, base + USB_SUSP_CTRL); |
| 594 | |
| 595 | val = 0; |
| 596 | writel(val, base + ULPI_TIMING_CTRL_1); |
| 597 | |
| 598 | val |= ULPI_DATA_TRIMMER_SEL(4); |
| 599 | val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); |
| 600 | val |= ULPI_DIR_TRIMMER_SEL(4); |
| 601 | writel(val, base + ULPI_TIMING_CTRL_1); |
| 602 | udelay(10); |
| 603 | |
| 604 | val |= ULPI_DATA_TRIMMER_LOAD; |
| 605 | val |= ULPI_STPDIRNXT_TRIMMER_LOAD; |
| 606 | val |= ULPI_DIR_TRIMMER_LOAD; |
| 607 | writel(val, base + ULPI_TIMING_CTRL_1); |
| 608 | |
| 609 | /* Fix VbusInvalid due to floating VBUS */ |
| 610 | ret = otg_io_write(phy->ulpi, 0x40, 0x08); |
| 611 | if (ret) { |
| 612 | pr_err("%s: ulpi write failed\n", __func__); |
| 613 | return ret; |
| 614 | } |
| 615 | |
| 616 | ret = otg_io_write(phy->ulpi, 0x80, 0x0B); |
| 617 | if (ret) { |
| 618 | pr_err("%s: ulpi write failed\n", __func__); |
| 619 | return ret; |
| 620 | } |
| 621 | |
| 622 | val = readl(base + USB_PORTSC1); |
| 623 | val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN; |
| 624 | writel(val, base + USB_PORTSC1); |
| 625 | |
| 626 | val = readl(base + USB_SUSP_CTRL); |
| 627 | val |= USB_SUSP_CLR; |
| 628 | writel(val, base + USB_SUSP_CTRL); |
| 629 | udelay(100); |
| 630 | |
| 631 | val = readl(base + USB_SUSP_CTRL); |
| 632 | val &= ~USB_SUSP_CLR; |
| 633 | writel(val, base + USB_SUSP_CTRL); |
| 634 | |
| 635 | return 0; |
| 636 | } |
| 637 | |
| 638 | static void ulpi_phy_power_off(struct tegra_usb_phy *phy) |
| 639 | { |
| 640 | unsigned long val; |
| 641 | void __iomem *base = phy->regs; |
| 642 | struct tegra_ulpi_config *config = phy->config; |
| 643 | |
| 644 | /* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB |
| 645 | * Controller to immediately bring the ULPI PHY out of low power |
| 646 | */ |
| 647 | val = readl(base + USB_PORTSC1); |
| 648 | val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN); |
| 649 | writel(val, base + USB_PORTSC1); |
| 650 | |
| 651 | gpio_direction_output(config->reset_gpio, 0); |
| 652 | clk_disable(phy->clk); |
| 653 | } |
| 654 | |
| 655 | struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs, |
| 656 | void *config, enum tegra_usb_phy_mode phy_mode) |
| 657 | { |
| 658 | struct tegra_usb_phy *phy; |
| 659 | struct tegra_ulpi_config *ulpi_config; |
| 660 | unsigned long parent_rate; |
| 661 | int i; |
| 662 | int err; |
| 663 | |
| 664 | phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); |
| 665 | if (!phy) |
| 666 | return ERR_PTR(-ENOMEM); |
| 667 | |
| 668 | phy->instance = instance; |
| 669 | phy->regs = regs; |
| 670 | phy->config = config; |
| 671 | phy->mode = phy_mode; |
| 672 | |
| 673 | if (!phy->config) { |
| 674 | if (phy_is_ulpi(phy)) { |
| 675 | pr_err("%s: ulpi phy configuration missing", __func__); |
| 676 | err = -EINVAL; |
| 677 | goto err0; |
| 678 | } else { |
| 679 | phy->config = &utmip_default[instance]; |
| 680 | } |
| 681 | } |
| 682 | |
| 683 | phy->pll_u = clk_get_sys(NULL, "pll_u"); |
| 684 | if (IS_ERR(phy->pll_u)) { |
| 685 | pr_err("Can't get pll_u clock\n"); |
| 686 | err = PTR_ERR(phy->pll_u); |
| 687 | goto err0; |
| 688 | } |
| 689 | clk_enable(phy->pll_u); |
| 690 | |
| 691 | parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); |
| 692 | for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { |
| 693 | if (tegra_freq_table[i].freq == parent_rate) { |
| 694 | phy->freq = &tegra_freq_table[i]; |
| 695 | break; |
| 696 | } |
| 697 | } |
| 698 | if (!phy->freq) { |
| 699 | pr_err("invalid pll_u parent rate %ld\n", parent_rate); |
| 700 | err = -EINVAL; |
| 701 | goto err1; |
| 702 | } |
| 703 | |
| 704 | if (phy_is_ulpi(phy)) { |
| 705 | ulpi_config = config; |
| 706 | phy->clk = clk_get_sys(NULL, ulpi_config->clk); |
| 707 | if (IS_ERR(phy->clk)) { |
| 708 | pr_err("%s: can't get ulpi clock\n", __func__); |
| 709 | err = -ENXIO; |
| 710 | goto err1; |
| 711 | } |
| 712 | tegra_gpio_enable(ulpi_config->reset_gpio); |
| 713 | gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); |
| 714 | gpio_direction_output(ulpi_config->reset_gpio, 0); |
| 715 | phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); |
| 716 | phy->ulpi->io_priv = regs + ULPI_VIEWPORT; |
| 717 | } else { |
| 718 | err = utmip_pad_open(phy); |
| 719 | if (err < 0) |
| 720 | goto err1; |
| 721 | } |
| 722 | |
| 723 | return phy; |
| 724 | |
| 725 | err1: |
| 726 | clk_disable(phy->pll_u); |
| 727 | clk_put(phy->pll_u); |
| 728 | err0: |
| 729 | kfree(phy); |
| 730 | return ERR_PTR(err); |
| 731 | } |
| 732 | |
| 733 | int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) |
| 734 | { |
| 735 | if (phy_is_ulpi(phy)) |
| 736 | return ulpi_phy_power_on(phy); |
| 737 | else |
| 738 | return utmi_phy_power_on(phy); |
| 739 | } |
| 740 | |
| 741 | void tegra_usb_phy_power_off(struct tegra_usb_phy *phy) |
| 742 | { |
| 743 | if (phy_is_ulpi(phy)) |
| 744 | ulpi_phy_power_off(phy); |
| 745 | else |
| 746 | utmi_phy_power_off(phy); |
| 747 | } |
| 748 | |
| 749 | void tegra_usb_phy_preresume(struct tegra_usb_phy *phy) |
| 750 | { |
| 751 | if (!phy_is_ulpi(phy)) |
| 752 | utmi_phy_preresume(phy); |
| 753 | } |
| 754 | |
| 755 | void tegra_usb_phy_postresume(struct tegra_usb_phy *phy) |
| 756 | { |
| 757 | if (!phy_is_ulpi(phy)) |
| 758 | utmi_phy_postresume(phy); |
| 759 | } |
| 760 | |
| 761 | void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, |
| 762 | enum tegra_usb_phy_port_speed port_speed) |
| 763 | { |
| 764 | if (!phy_is_ulpi(phy)) |
| 765 | utmi_phy_restore_start(phy, port_speed); |
| 766 | } |
| 767 | |
| 768 | void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy) |
| 769 | { |
| 770 | if (!phy_is_ulpi(phy)) |
| 771 | utmi_phy_restore_end(phy); |
| 772 | } |
| 773 | |
| 774 | void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy) |
| 775 | { |
| 776 | if (!phy_is_ulpi(phy)) |
| 777 | utmi_phy_clk_disable(phy); |
| 778 | } |
| 779 | |
| 780 | void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy) |
| 781 | { |
| 782 | if (!phy_is_ulpi(phy)) |
| 783 | utmi_phy_clk_enable(phy); |
| 784 | } |
| 785 | |
| 786 | void tegra_usb_phy_close(struct tegra_usb_phy *phy) |
| 787 | { |
| 788 | if (phy_is_ulpi(phy)) |
| 789 | clk_put(phy->clk); |
| 790 | else |
| 791 | utmip_pad_close(phy); |
| 792 | clk_disable(phy->pll_u); |
| 793 | clk_put(phy->pll_u); |
| 794 | kfree(phy); |
| 795 | } |