David Kilroy | 712a434 | 2009-02-04 23:05:55 +0000 | [diff] [blame] | 1 | /* Encapsulate basic setting changes and retrieval on Hermes hardware |
| 2 | * |
| 3 | * See copyright notice in main.c |
| 4 | */ |
| 5 | #include <linux/kernel.h> |
| 6 | #include <linux/if_arp.h> |
| 7 | #include <linux/ieee80211.h> |
| 8 | #include <linux/wireless.h> |
| 9 | |
| 10 | #include "hermes.h" |
| 11 | #include "hermes_rid.h" |
| 12 | #include "orinoco.h" |
| 13 | |
| 14 | #include "hw.h" |
| 15 | |
| 16 | /********************************************************************/ |
| 17 | /* Data tables */ |
| 18 | /********************************************************************/ |
| 19 | |
| 20 | /* This tables gives the actual meanings of the bitrate IDs returned |
| 21 | * by the firmware. */ |
| 22 | static const struct { |
| 23 | int bitrate; /* in 100s of kilobits */ |
| 24 | int automatic; |
| 25 | u16 agere_txratectrl; |
| 26 | u16 intersil_txratectrl; |
| 27 | } bitrate_table[] = { |
| 28 | {110, 1, 3, 15}, /* Entry 0 is the default */ |
| 29 | {10, 0, 1, 1}, |
| 30 | {10, 1, 1, 1}, |
| 31 | {20, 0, 2, 2}, |
| 32 | {20, 1, 6, 3}, |
| 33 | {55, 0, 4, 4}, |
| 34 | {55, 1, 7, 7}, |
| 35 | {110, 0, 5, 8}, |
| 36 | }; |
| 37 | #define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) |
| 38 | |
| 39 | int orinoco_get_bitratemode(int bitrate, int automatic) |
| 40 | { |
| 41 | int ratemode = -1; |
| 42 | int i; |
| 43 | |
| 44 | if ((bitrate != 10) && (bitrate != 20) && |
| 45 | (bitrate != 55) && (bitrate != 110)) |
| 46 | return ratemode; |
| 47 | |
| 48 | for (i = 0; i < BITRATE_TABLE_SIZE; i++) { |
| 49 | if ((bitrate_table[i].bitrate == bitrate) && |
| 50 | (bitrate_table[i].automatic == automatic)) { |
| 51 | ratemode = i; |
| 52 | break; |
| 53 | } |
| 54 | } |
| 55 | return ratemode; |
| 56 | } |
| 57 | |
| 58 | void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic) |
| 59 | { |
| 60 | BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); |
| 61 | |
| 62 | *bitrate = bitrate_table[ratemode].bitrate * 100000; |
| 63 | *automatic = bitrate_table[ratemode].automatic; |
| 64 | } |
| 65 | |
| 66 | /* Get tsc from the firmware */ |
| 67 | int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) |
| 68 | { |
| 69 | hermes_t *hw = &priv->hw; |
| 70 | int err = 0; |
| 71 | u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE]; |
| 72 | |
| 73 | if ((key < 0) || (key > 4)) |
| 74 | return -EINVAL; |
| 75 | |
| 76 | err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, |
| 77 | sizeof(tsc_arr), NULL, &tsc_arr); |
| 78 | if (!err) |
| 79 | memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); |
| 80 | |
| 81 | return err; |
| 82 | } |
| 83 | |
| 84 | int __orinoco_hw_set_bitrate(struct orinoco_private *priv) |
| 85 | { |
| 86 | hermes_t *hw = &priv->hw; |
| 87 | int ratemode = priv->bitratemode; |
| 88 | int err = 0; |
| 89 | |
| 90 | if (ratemode >= BITRATE_TABLE_SIZE) { |
| 91 | printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", |
| 92 | priv->ndev->name, ratemode); |
| 93 | return -EINVAL; |
| 94 | } |
| 95 | |
| 96 | switch (priv->firmware_type) { |
| 97 | case FIRMWARE_TYPE_AGERE: |
| 98 | err = hermes_write_wordrec(hw, USER_BAP, |
| 99 | HERMES_RID_CNFTXRATECONTROL, |
| 100 | bitrate_table[ratemode].agere_txratectrl); |
| 101 | break; |
| 102 | case FIRMWARE_TYPE_INTERSIL: |
| 103 | case FIRMWARE_TYPE_SYMBOL: |
| 104 | err = hermes_write_wordrec(hw, USER_BAP, |
| 105 | HERMES_RID_CNFTXRATECONTROL, |
| 106 | bitrate_table[ratemode].intersil_txratectrl); |
| 107 | break; |
| 108 | default: |
| 109 | BUG(); |
| 110 | } |
| 111 | |
| 112 | return err; |
| 113 | } |
| 114 | |
| 115 | int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate) |
| 116 | { |
| 117 | hermes_t *hw = &priv->hw; |
| 118 | int i; |
| 119 | int err = 0; |
| 120 | u16 val; |
| 121 | |
| 122 | err = hermes_read_wordrec(hw, USER_BAP, |
| 123 | HERMES_RID_CURRENTTXRATE, &val); |
| 124 | if (err) |
| 125 | return err; |
| 126 | |
| 127 | switch (priv->firmware_type) { |
| 128 | case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ |
| 129 | /* Note : in Lucent firmware, the return value of |
| 130 | * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, |
| 131 | * and therefore is totally different from the |
| 132 | * encoding of HERMES_RID_CNFTXRATECONTROL. |
| 133 | * Don't forget that 6Mb/s is really 5.5Mb/s */ |
| 134 | if (val == 6) |
| 135 | *bitrate = 5500000; |
| 136 | else |
| 137 | *bitrate = val * 1000000; |
| 138 | break; |
| 139 | case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ |
| 140 | case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ |
| 141 | for (i = 0; i < BITRATE_TABLE_SIZE; i++) |
| 142 | if (bitrate_table[i].intersil_txratectrl == val) |
| 143 | break; |
| 144 | |
| 145 | if (i >= BITRATE_TABLE_SIZE) |
| 146 | printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", |
| 147 | priv->ndev->name, val); |
| 148 | |
| 149 | *bitrate = bitrate_table[i].bitrate * 100000; |
| 150 | break; |
| 151 | default: |
| 152 | BUG(); |
| 153 | } |
| 154 | |
| 155 | return err; |
| 156 | } |
| 157 | |
| 158 | /* Set fixed AP address */ |
| 159 | int __orinoco_hw_set_wap(struct orinoco_private *priv) |
| 160 | { |
| 161 | int roaming_flag; |
| 162 | int err = 0; |
| 163 | hermes_t *hw = &priv->hw; |
| 164 | |
| 165 | switch (priv->firmware_type) { |
| 166 | case FIRMWARE_TYPE_AGERE: |
| 167 | /* not supported */ |
| 168 | break; |
| 169 | case FIRMWARE_TYPE_INTERSIL: |
| 170 | if (priv->bssid_fixed) |
| 171 | roaming_flag = 2; |
| 172 | else |
| 173 | roaming_flag = 1; |
| 174 | |
| 175 | err = hermes_write_wordrec(hw, USER_BAP, |
| 176 | HERMES_RID_CNFROAMINGMODE, |
| 177 | roaming_flag); |
| 178 | break; |
| 179 | case FIRMWARE_TYPE_SYMBOL: |
| 180 | err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| 181 | HERMES_RID_CNFMANDATORYBSSID_SYMBOL, |
| 182 | &priv->desired_bssid); |
| 183 | break; |
| 184 | } |
| 185 | return err; |
| 186 | } |
| 187 | |
| 188 | /* Change the WEP keys and/or the current keys. Can be called |
| 189 | * either from __orinoco_hw_setup_enc() or directly from |
| 190 | * orinoco_ioctl_setiwencode(). In the later case the association |
| 191 | * with the AP is not broken (if the firmware can handle it), |
| 192 | * which is needed for 802.1x implementations. */ |
| 193 | int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) |
| 194 | { |
| 195 | hermes_t *hw = &priv->hw; |
| 196 | int err = 0; |
| 197 | |
| 198 | switch (priv->firmware_type) { |
| 199 | case FIRMWARE_TYPE_AGERE: |
| 200 | err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| 201 | HERMES_RID_CNFWEPKEYS_AGERE, |
| 202 | &priv->keys); |
| 203 | if (err) |
| 204 | return err; |
| 205 | err = hermes_write_wordrec(hw, USER_BAP, |
| 206 | HERMES_RID_CNFTXKEY_AGERE, |
| 207 | priv->tx_key); |
| 208 | if (err) |
| 209 | return err; |
| 210 | break; |
| 211 | case FIRMWARE_TYPE_INTERSIL: |
| 212 | case FIRMWARE_TYPE_SYMBOL: |
| 213 | { |
| 214 | int keylen; |
| 215 | int i; |
| 216 | |
| 217 | /* Force uniform key length to work around |
| 218 | * firmware bugs */ |
| 219 | keylen = le16_to_cpu(priv->keys[priv->tx_key].len); |
| 220 | |
| 221 | if (keylen > LARGE_KEY_SIZE) { |
| 222 | printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", |
| 223 | priv->ndev->name, priv->tx_key, keylen); |
| 224 | return -E2BIG; |
| 225 | } |
| 226 | |
| 227 | /* Write all 4 keys */ |
| 228 | for (i = 0; i < ORINOCO_MAX_KEYS; i++) { |
| 229 | err = hermes_write_ltv(hw, USER_BAP, |
| 230 | HERMES_RID_CNFDEFAULTKEY0 + i, |
| 231 | HERMES_BYTES_TO_RECLEN(keylen), |
| 232 | priv->keys[i].data); |
| 233 | if (err) |
| 234 | return err; |
| 235 | } |
| 236 | |
| 237 | /* Write the index of the key used in transmission */ |
| 238 | err = hermes_write_wordrec(hw, USER_BAP, |
| 239 | HERMES_RID_CNFWEPDEFAULTKEYID, |
| 240 | priv->tx_key); |
| 241 | if (err) |
| 242 | return err; |
| 243 | } |
| 244 | break; |
| 245 | } |
| 246 | |
| 247 | return 0; |
| 248 | } |
| 249 | |
| 250 | int __orinoco_hw_setup_enc(struct orinoco_private *priv) |
| 251 | { |
| 252 | hermes_t *hw = &priv->hw; |
| 253 | int err = 0; |
| 254 | int master_wep_flag; |
| 255 | int auth_flag; |
| 256 | int enc_flag; |
| 257 | |
| 258 | /* Setup WEP keys for WEP and WPA */ |
| 259 | if (priv->encode_alg) |
| 260 | __orinoco_hw_setup_wepkeys(priv); |
| 261 | |
| 262 | if (priv->wep_restrict) |
| 263 | auth_flag = HERMES_AUTH_SHARED_KEY; |
| 264 | else |
| 265 | auth_flag = HERMES_AUTH_OPEN; |
| 266 | |
| 267 | if (priv->wpa_enabled) |
| 268 | enc_flag = 2; |
| 269 | else if (priv->encode_alg == IW_ENCODE_ALG_WEP) |
| 270 | enc_flag = 1; |
| 271 | else |
| 272 | enc_flag = 0; |
| 273 | |
| 274 | switch (priv->firmware_type) { |
| 275 | case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ |
| 276 | if (priv->encode_alg == IW_ENCODE_ALG_WEP) { |
| 277 | /* Enable the shared-key authentication. */ |
| 278 | err = hermes_write_wordrec(hw, USER_BAP, |
| 279 | HERMES_RID_CNFAUTHENTICATION_AGERE, |
| 280 | auth_flag); |
| 281 | } |
| 282 | err = hermes_write_wordrec(hw, USER_BAP, |
| 283 | HERMES_RID_CNFWEPENABLED_AGERE, |
| 284 | enc_flag); |
| 285 | if (err) |
| 286 | return err; |
| 287 | |
| 288 | if (priv->has_wpa) { |
| 289 | /* Set WPA key management */ |
| 290 | err = hermes_write_wordrec(hw, USER_BAP, |
| 291 | HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, |
| 292 | priv->key_mgmt); |
| 293 | if (err) |
| 294 | return err; |
| 295 | } |
| 296 | |
| 297 | break; |
| 298 | |
| 299 | case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ |
| 300 | case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ |
| 301 | if (priv->encode_alg == IW_ENCODE_ALG_WEP) { |
| 302 | if (priv->wep_restrict || |
| 303 | (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) |
| 304 | master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | |
| 305 | HERMES_WEP_EXCL_UNENCRYPTED; |
| 306 | else |
| 307 | master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; |
| 308 | |
| 309 | err = hermes_write_wordrec(hw, USER_BAP, |
| 310 | HERMES_RID_CNFAUTHENTICATION, |
| 311 | auth_flag); |
| 312 | if (err) |
| 313 | return err; |
| 314 | } else |
| 315 | master_wep_flag = 0; |
| 316 | |
| 317 | if (priv->iw_mode == IW_MODE_MONITOR) |
| 318 | master_wep_flag |= HERMES_WEP_HOST_DECRYPT; |
| 319 | |
| 320 | /* Master WEP setting : on/off */ |
| 321 | err = hermes_write_wordrec(hw, USER_BAP, |
| 322 | HERMES_RID_CNFWEPFLAGS_INTERSIL, |
| 323 | master_wep_flag); |
| 324 | if (err) |
| 325 | return err; |
| 326 | |
| 327 | break; |
| 328 | } |
| 329 | |
| 330 | return 0; |
| 331 | } |
| 332 | |
| 333 | /* key must be 32 bytes, including the tx and rx MIC keys. |
| 334 | * rsc must be 8 bytes |
| 335 | * tsc must be 8 bytes or NULL |
| 336 | */ |
| 337 | int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx, |
| 338 | u8 *key, u8 *rsc, u8 *tsc) |
| 339 | { |
| 340 | struct { |
| 341 | __le16 idx; |
| 342 | u8 rsc[IW_ENCODE_SEQ_MAX_SIZE]; |
| 343 | u8 key[TKIP_KEYLEN]; |
| 344 | u8 tx_mic[MIC_KEYLEN]; |
| 345 | u8 rx_mic[MIC_KEYLEN]; |
| 346 | u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; |
| 347 | } __attribute__ ((packed)) buf; |
| 348 | int ret; |
| 349 | int err; |
| 350 | int k; |
| 351 | u16 xmitting; |
| 352 | |
| 353 | key_idx &= 0x3; |
| 354 | |
| 355 | if (set_tx) |
| 356 | key_idx |= 0x8000; |
| 357 | |
| 358 | buf.idx = cpu_to_le16(key_idx); |
| 359 | memcpy(buf.key, key, |
| 360 | sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); |
| 361 | |
| 362 | if (rsc == NULL) |
| 363 | memset(buf.rsc, 0, sizeof(buf.rsc)); |
| 364 | else |
| 365 | memcpy(buf.rsc, rsc, sizeof(buf.rsc)); |
| 366 | |
| 367 | if (tsc == NULL) { |
| 368 | memset(buf.tsc, 0, sizeof(buf.tsc)); |
| 369 | buf.tsc[4] = 0x10; |
| 370 | } else { |
| 371 | memcpy(buf.tsc, tsc, sizeof(buf.tsc)); |
| 372 | } |
| 373 | |
| 374 | /* Wait upto 100ms for tx queue to empty */ |
| 375 | k = 100; |
| 376 | do { |
| 377 | k--; |
| 378 | udelay(1000); |
| 379 | ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, |
| 380 | &xmitting); |
| 381 | if (ret) |
| 382 | break; |
| 383 | } while ((k > 0) && xmitting); |
| 384 | |
| 385 | if (k == 0) |
| 386 | ret = -ETIMEDOUT; |
| 387 | |
| 388 | err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| 389 | HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, |
| 390 | &buf); |
| 391 | |
| 392 | return ret ? ret : err; |
| 393 | } |
| 394 | |
| 395 | int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx) |
| 396 | { |
| 397 | hermes_t *hw = &priv->hw; |
| 398 | int err; |
| 399 | |
| 400 | memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx])); |
| 401 | err = hermes_write_wordrec(hw, USER_BAP, |
| 402 | HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, |
| 403 | key_idx); |
| 404 | if (err) |
| 405 | printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", |
| 406 | priv->ndev->name, err, key_idx); |
| 407 | return err; |
| 408 | } |
| 409 | |
| 410 | int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, |
| 411 | struct dev_addr_list *mc_list, |
| 412 | int mc_count, int promisc) |
| 413 | { |
| 414 | hermes_t *hw = &priv->hw; |
| 415 | int err = 0; |
| 416 | |
| 417 | if (promisc != priv->promiscuous) { |
| 418 | err = hermes_write_wordrec(hw, USER_BAP, |
| 419 | HERMES_RID_CNFPROMISCUOUSMODE, |
| 420 | promisc); |
| 421 | if (err) { |
| 422 | printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", |
| 423 | priv->ndev->name, err); |
| 424 | } else |
| 425 | priv->promiscuous = promisc; |
| 426 | } |
| 427 | |
| 428 | /* If we're not in promiscuous mode, then we need to set the |
| 429 | * group address if either we want to multicast, or if we were |
| 430 | * multicasting and want to stop */ |
| 431 | if (!promisc && (mc_count || priv->mc_count)) { |
| 432 | struct dev_mc_list *p = mc_list; |
| 433 | struct hermes_multicast mclist; |
| 434 | int i; |
| 435 | |
| 436 | for (i = 0; i < mc_count; i++) { |
| 437 | /* paranoia: is list shorter than mc_count? */ |
| 438 | BUG_ON(!p); |
| 439 | /* paranoia: bad address size in list? */ |
| 440 | BUG_ON(p->dmi_addrlen != ETH_ALEN); |
| 441 | |
| 442 | memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); |
| 443 | p = p->next; |
| 444 | } |
| 445 | |
| 446 | if (p) |
| 447 | printk(KERN_WARNING "%s: Multicast list is " |
| 448 | "longer than mc_count\n", priv->ndev->name); |
| 449 | |
| 450 | err = hermes_write_ltv(hw, USER_BAP, |
| 451 | HERMES_RID_CNFGROUPADDRESSES, |
| 452 | HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), |
| 453 | &mclist); |
| 454 | if (err) |
| 455 | printk(KERN_ERR "%s: Error %d setting multicast list.\n", |
| 456 | priv->ndev->name, err); |
| 457 | else |
| 458 | priv->mc_count = mc_count; |
| 459 | } |
| 460 | return err; |
| 461 | } |
| 462 | |
| 463 | /* Return : < 0 -> error code ; >= 0 -> length */ |
| 464 | int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, |
| 465 | char buf[IW_ESSID_MAX_SIZE+1]) |
| 466 | { |
| 467 | hermes_t *hw = &priv->hw; |
| 468 | int err = 0; |
| 469 | struct hermes_idstring essidbuf; |
| 470 | char *p = (char *)(&essidbuf.val); |
| 471 | int len; |
| 472 | unsigned long flags; |
| 473 | |
| 474 | if (orinoco_lock(priv, &flags) != 0) |
| 475 | return -EBUSY; |
| 476 | |
| 477 | if (strlen(priv->desired_essid) > 0) { |
| 478 | /* We read the desired SSID from the hardware rather |
| 479 | than from priv->desired_essid, just in case the |
| 480 | firmware is allowed to change it on us. I'm not |
| 481 | sure about this */ |
| 482 | /* My guess is that the OWNSSID should always be whatever |
| 483 | * we set to the card, whereas CURRENT_SSID is the one that |
| 484 | * may change... - Jean II */ |
| 485 | u16 rid; |
| 486 | |
| 487 | *active = 1; |
| 488 | |
| 489 | rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : |
| 490 | HERMES_RID_CNFDESIREDSSID; |
| 491 | |
| 492 | err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), |
| 493 | NULL, &essidbuf); |
| 494 | if (err) |
| 495 | goto fail_unlock; |
| 496 | } else { |
| 497 | *active = 0; |
| 498 | |
| 499 | err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, |
| 500 | sizeof(essidbuf), NULL, &essidbuf); |
| 501 | if (err) |
| 502 | goto fail_unlock; |
| 503 | } |
| 504 | |
| 505 | len = le16_to_cpu(essidbuf.len); |
| 506 | BUG_ON(len > IW_ESSID_MAX_SIZE); |
| 507 | |
| 508 | memset(buf, 0, IW_ESSID_MAX_SIZE); |
| 509 | memcpy(buf, p, len); |
| 510 | err = len; |
| 511 | |
| 512 | fail_unlock: |
| 513 | orinoco_unlock(priv, &flags); |
| 514 | |
| 515 | return err; |
| 516 | } |
| 517 | |
| 518 | int orinoco_hw_get_freq(struct orinoco_private *priv) |
| 519 | { |
| 520 | hermes_t *hw = &priv->hw; |
| 521 | int err = 0; |
| 522 | u16 channel; |
| 523 | int freq = 0; |
| 524 | unsigned long flags; |
| 525 | |
| 526 | if (orinoco_lock(priv, &flags) != 0) |
| 527 | return -EBUSY; |
| 528 | |
| 529 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, |
| 530 | &channel); |
| 531 | if (err) |
| 532 | goto out; |
| 533 | |
| 534 | /* Intersil firmware 1.3.5 returns 0 when the interface is down */ |
| 535 | if (channel == 0) { |
| 536 | err = -EBUSY; |
| 537 | goto out; |
| 538 | } |
| 539 | |
| 540 | if ((channel < 1) || (channel > NUM_CHANNELS)) { |
| 541 | printk(KERN_WARNING "%s: Channel out of range (%d)!\n", |
| 542 | priv->ndev->name, channel); |
| 543 | err = -EBUSY; |
| 544 | goto out; |
| 545 | |
| 546 | } |
| 547 | freq = ieee80211_dsss_chan_to_freq(channel); |
| 548 | |
| 549 | out: |
| 550 | orinoco_unlock(priv, &flags); |
| 551 | |
| 552 | if (err > 0) |
| 553 | err = -EBUSY; |
| 554 | return err ? err : freq; |
| 555 | } |
| 556 | |
| 557 | int orinoco_hw_get_bitratelist(struct orinoco_private *priv, |
| 558 | int *numrates, s32 *rates, int max) |
| 559 | { |
| 560 | hermes_t *hw = &priv->hw; |
| 561 | struct hermes_idstring list; |
| 562 | unsigned char *p = (unsigned char *)&list.val; |
| 563 | int err = 0; |
| 564 | int num; |
| 565 | int i; |
| 566 | unsigned long flags; |
| 567 | |
| 568 | if (orinoco_lock(priv, &flags) != 0) |
| 569 | return -EBUSY; |
| 570 | |
| 571 | err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, |
| 572 | sizeof(list), NULL, &list); |
| 573 | orinoco_unlock(priv, &flags); |
| 574 | |
| 575 | if (err) |
| 576 | return err; |
| 577 | |
| 578 | num = le16_to_cpu(list.len); |
| 579 | *numrates = num; |
| 580 | num = min(num, max); |
| 581 | |
| 582 | for (i = 0; i < num; i++) |
| 583 | rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ |
| 584 | |
| 585 | return 0; |
| 586 | } |