blob: 68baddf3c3e04f0c75e03dcf58a83dc926d57644 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001Mounting the root filesystem via NFS (nfsroot)
2===============================================
3
4Written 1996 by Gero Kuhlmann <gero@gkminix.han.de>
5Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
Nico Schottelius7e9dd122006-03-24 03:18:18 -08006Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org>
Horms64552a52006-07-10 04:43:58 -07007Updated 2006 by Horms <horms@verge.net.au>
Linus Torvalds1da177e2005-04-16 15:20:36 -07008
9
10
Horms64552a52006-07-10 04:43:58 -070011In order to use a diskless system, such as an X-terminal or printer server
12for example, it is necessary for the root filesystem to be present on a
13non-disk device. This may be an initramfs (see Documentation/filesystems/
Matt LaPlantefff92892006-10-03 22:47:42 +020014ramfs-rootfs-initramfs.txt), a ramdisk (see Documentation/initrd.txt) or a
Horms64552a52006-07-10 04:43:58 -070015filesystem mounted via NFS. The following text describes on how to use NFS
16for the root filesystem. For the rest of this text 'client' means the
Linus Torvalds1da177e2005-04-16 15:20:36 -070017diskless system, and 'server' means the NFS server.
18
19
20
21
221.) Enabling nfsroot capabilities
23 -----------------------------
24
Horms64552a52006-07-10 04:43:58 -070025In order to use nfsroot, NFS client support needs to be selected as
26built-in during configuration. Once this has been selected, the nfsroot
27option will become available, which should also be selected.
28
29In the networking options, kernel level autoconfiguration can be selected,
30along with the types of autoconfiguration to support. Selecting all of
31DHCP, BOOTP and RARP is safe.
Linus Torvalds1da177e2005-04-16 15:20:36 -070032
33
34
35
362.) Kernel command line
37 -------------------
38
Horms64552a52006-07-10 04:43:58 -070039When the kernel has been loaded by a boot loader (see below) it needs to be
40told what root fs device to use. And in the case of nfsroot, where to find
41both the server and the name of the directory on the server to mount as root.
42This can be established using the following kernel command line parameters:
Linus Torvalds1da177e2005-04-16 15:20:36 -070043
44
45root=/dev/nfs
46
47 This is necessary to enable the pseudo-NFS-device. Note that it's not a
48 real device but just a synonym to tell the kernel to use NFS instead of
49 a real device.
50
51
52nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
53
Horms64552a52006-07-10 04:43:58 -070054 If the `nfsroot' parameter is NOT given on the command line,
55 the default "/tftpboot/%s" will be used.
Linus Torvalds1da177e2005-04-16 15:20:36 -070056
Horms64552a52006-07-10 04:43:58 -070057 <server-ip> Specifies the IP address of the NFS server.
58 The default address is determined by the `ip' parameter
59 (see below). This parameter allows the use of different
60 servers for IP autoconfiguration and NFS.
Linus Torvalds1da177e2005-04-16 15:20:36 -070061
Horms64552a52006-07-10 04:43:58 -070062 <root-dir> Name of the directory on the server to mount as root.
63 If there is a "%s" token in the string, it will be
64 replaced by the ASCII-representation of the client's
65 IP address.
Linus Torvalds1da177e2005-04-16 15:20:36 -070066
67 <nfs-options> Standard NFS options. All options are separated by commas.
Horms64552a52006-07-10 04:43:58 -070068 The following defaults are used:
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 port = as given by server portmap daemon
Dan Aloni91dd26a2007-02-12 00:51:54 -080070 rsize = 4096
71 wsize = 4096
Linus Torvalds1da177e2005-04-16 15:20:36 -070072 timeo = 7
73 retrans = 3
74 acregmin = 3
75 acregmax = 60
76 acdirmin = 30
77 acdirmax = 60
78 flags = hard, nointr, noposix, cto, ac
79
80
81ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
82
83 This parameter tells the kernel how to configure IP addresses of devices
Horms64552a52006-07-10 04:43:58 -070084 and also how to set up the IP routing table. It was originally called
85 `nfsaddrs', but now the boot-time IP configuration works independently of
86 NFS, so it was renamed to `ip' and the old name remained as an alias for
87 compatibility reasons.
Linus Torvalds1da177e2005-04-16 15:20:36 -070088
89 If this parameter is missing from the kernel command line, all fields are
90 assumed to be empty, and the defaults mentioned below apply. In general
Horms64552a52006-07-10 04:43:58 -070091 this means that the kernel tries to configure everything using
92 autoconfiguration.
Linus Torvalds1da177e2005-04-16 15:20:36 -070093
94 The <autoconf> parameter can appear alone as the value to the `ip'
Amos Waterlandf33e1d92007-12-14 11:30:22 -080095 parameter (without all the ':' characters before). If the value is
96 "ip=off" or "ip=none", no autoconfiguration will take place, otherwise
97 autoconfiguration will take place. The most common way to use this
98 is "ip=dhcp".
99
Horms64552a52006-07-10 04:43:58 -0700100 <client-ip> IP address of the client.
101
102 Default: Determined using autoconfiguration.
103
104 <server-ip> IP address of the NFS server. If RARP is used to determine
105 the client address and this parameter is NOT empty only
106 replies from the specified server are accepted.
107
108 Only required for for NFS root. That is autoconfiguration
109 will not be triggered if it is missing and NFS root is not
110 in operation.
111
112 Default: Determined using autoconfiguration.
113 The address of the autoconfiguration server is used.
114
115 <gw-ip> IP address of a gateway if the server is on a different subnet.
116
117 Default: Determined using autoconfiguration.
118
119 <netmask> Netmask for local network interface. If unspecified
120 the netmask is derived from the client IP address assuming
121 classful addressing.
122
123 Default: Determined using autoconfiguration.
124
125 <hostname> Name of the client. May be supplied by autoconfiguration,
126 but its absence will not trigger autoconfiguration.
127
128 Default: Client IP address is used in ASCII notation.
129
130 <device> Name of network device to use.
131
132 Default: If the host only has one device, it is used.
133 Otherwise the device is determined using
134 autoconfiguration. This is done by sending
135 autoconfiguration requests out of all devices,
136 and using the device that received the first reply.
137
138 <autoconf> Method to use for autoconfiguration. In the case of options
139 which specify multiple autoconfiguration protocols,
140 requests are sent using all protocols, and the first one
141 to reply is used.
142
143 Only autoconfiguration protocols that have been compiled
144 into the kernel will be used, regardless of the value of
145 this option.
146
Amos Waterlandf33e1d92007-12-14 11:30:22 -0800147 off or none: don't use autoconfiguration
Amos Waterland92ffb852008-01-05 23:23:06 -0800148 (do static IP assignment instead)
Horms64552a52006-07-10 04:43:58 -0700149 on or any: use any protocol available in the kernel
Simon Hormana6c05c32007-12-25 20:54:42 -0800150 (default)
Horms64552a52006-07-10 04:43:58 -0700151 dhcp: use DHCP
152 bootp: use BOOTP
153 rarp: use RARP
154 both: use both BOOTP and RARP but not DHCP
155 (old option kept for backwards compatibility)
156
157 Default: any
Linus Torvalds1da177e2005-04-16 15:20:36 -0700158
159
160
Linus Torvalds1da177e2005-04-16 15:20:36 -0700161
Horms64552a52006-07-10 04:43:58 -07001623.) Boot Loader
163 ----------
164
165To get the kernel into memory different approaches can be used.
166They depend on various facilities being available:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167
168
Horms64552a52006-07-10 04:43:58 -07001693.1) Booting from a floppy using syslinux
Linus Torvalds1da177e2005-04-16 15:20:36 -0700170
Horms64552a52006-07-10 04:43:58 -0700171 When building kernels, an easy way to create a boot floppy that uses
Shane McDonald1c828322008-10-15 22:01:46 -0700172 syslinux is to use the zdisk or bzdisk make targets which use zimage
Horms64552a52006-07-10 04:43:58 -0700173 and bzimage images respectively. Both targets accept the
174 FDARGS parameter which can be used to set the kernel command line.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175
Horms64552a52006-07-10 04:43:58 -0700176 e.g.
177 make bzdisk FDARGS="root=/dev/nfs"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700178
Horms64552a52006-07-10 04:43:58 -0700179 Note that the user running this command will need to have
180 access to the floppy drive device, /dev/fd0
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181
Horms64552a52006-07-10 04:43:58 -0700182 For more information on syslinux, including how to create bootdisks
183 for prebuilt kernels, see http://syslinux.zytor.com/
Linus Torvalds1da177e2005-04-16 15:20:36 -0700184
Horms64552a52006-07-10 04:43:58 -0700185 N.B: Previously it was possible to write a kernel directly to
186 a floppy using dd, configure the boot device using rdev, and
187 boot using the resulting floppy. Linux no longer supports this
188 method of booting.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189
Horms64552a52006-07-10 04:43:58 -07001903.2) Booting from a cdrom using isolinux
191
192 When building kernels, an easy way to create a bootable cdrom that
193 uses isolinux is to use the isoimage target which uses a bzimage
194 image. Like zdisk and bzdisk, this target accepts the FDARGS
195 parameter which can be used to set the kernel command line.
196
197 e.g.
198 make isoimage FDARGS="root=/dev/nfs"
199
200 The resulting iso image will be arch/<ARCH>/boot/image.iso
201 This can be written to a cdrom using a variety of tools including
202 cdrecord.
203
204 e.g.
205 cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso
206
207 For more information on isolinux, including how to create bootdisks
208 for prebuilt kernels, see http://syslinux.zytor.com/
Linus Torvalds1da177e2005-04-16 15:20:36 -0700209
Linus Torvalds1da177e2005-04-16 15:20:36 -07002103.2) Using LILO
Horms64552a52006-07-10 04:43:58 -0700211 When using LILO all the necessary command line parameters may be
212 specified using the 'append=' directive in the LILO configuration
213 file.
214
215 However, to use the 'root=' directive you also need to create
216 a dummy root device, which may be removed after LILO is run.
217
218 mknod /dev/boot255 c 0 255
219
220 For information on configuring LILO, please refer to its documentation.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700221
Nico Schottelius7e9dd122006-03-24 03:18:18 -08002223.3) Using GRUB
Horms64552a52006-07-10 04:43:58 -0700223 When using GRUB, kernel parameter are simply appended after the kernel
224 specification: kernel <kernel> <parameters>
Nico Schottelius7e9dd122006-03-24 03:18:18 -0800225
2263.4) Using loadlin
Horms64552a52006-07-10 04:43:58 -0700227 loadlin may be used to boot Linux from a DOS command prompt without
228 requiring a local hard disk to mount as root. This has not been
229 thoroughly tested by the authors of this document, but in general
230 it should be possible configure the kernel command line similarly
231 to the configuration of LILO.
232
233 Please refer to the loadlin documentation for further information.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700234
Nico Schottelius7e9dd122006-03-24 03:18:18 -08002353.5) Using a boot ROM
Horms64552a52006-07-10 04:43:58 -0700236 This is probably the most elegant way of booting a diskless client.
237 With a boot ROM the kernel is loaded using the TFTP protocol. The
238 authors of this document are not aware of any no commercial boot
239 ROMs that support booting Linux over the network. However, there
240 are two free implementations of a boot ROM, netboot-nfs and
241 etherboot, both of which are available on sunsite.unc.edu, and both
242 of which contain everything you need to boot a diskless Linux client.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700243
Nico Schottelius7e9dd122006-03-24 03:18:18 -08002443.6) Using pxelinux
Horms64552a52006-07-10 04:43:58 -0700245 Pxelinux may be used to boot linux using the PXE boot loader
246 which is present on many modern network cards.
247
248 When using pxelinux, the kernel image is specified using
Nico Schottelius7e9dd122006-03-24 03:18:18 -0800249 "kernel <relative-path-below /tftpboot>". The nfsroot parameters
250 are passed to the kernel by adding them to the "append" line.
Horms64552a52006-07-10 04:43:58 -0700251 It is common to use serial console in conjunction with pxeliunx,
252 see Documentation/serial-console.txt for more information.
253
254 For more information on isolinux, including how to create bootdisks
255 for prebuilt kernels, see http://syslinux.zytor.com/
Nico Schottelius7e9dd122006-03-24 03:18:18 -0800256
Linus Torvalds1da177e2005-04-16 15:20:36 -0700257
258
259
2604.) Credits
261 -------
262
263 The nfsroot code in the kernel and the RARP support have been written
264 by Gero Kuhlmann <gero@gkminix.han.de>.
265
266 The rest of the IP layer autoconfiguration code has been written
267 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>.
268
269 In order to write the initial version of nfsroot I would like to thank
270 Jens-Uwe Mager <jum@anubis.han.de> for his help.