blob: e333a429b68184aa581b813a6357d333954b66de [file] [log] [blame]
David Woodhouse4d2acfb2008-05-23 13:58:12 +01001#
2# kbuild file for firmware/
3#
4
5# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6# leading /, it's relative to $(srctree).
7fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
David Woodhouse88ecf812008-05-29 11:01:51 +030012# There are three cases to care about:
13# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14# include the firmware files to include, according to .config
15# 2. 'make modules_install', which will install firmware for modules, and
16# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17# 3. 'make firmware_install', which installs all firmware, unconditionally.
David Woodhoused172e7f2008-06-25 13:56:07 +010018
David Woodhouse88ecf812008-05-29 11:01:51 +030019# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21# But be aware that the config file might not be included at all.
22
Jaswinder Singh949b4252009-01-04 16:09:40 -080023ifdef CONFIG_ACENIC_OMIT_TIGON_I
24acenic-objs := acenic/tg2.bin
25fw-shipped- += acenic/tg1.bin
26else
27acenic-objs := acenic/tg1.bin acenic/tg2.bin
28endif
29fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
Jaswinder Singh7f127d52008-07-05 15:28:30 +053030fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
David Woodhouse27d202f2008-06-05 12:59:51 +010031fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
Jaswinder Singhfcaa4062008-09-22 19:27:10 -070032fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
David Woodhouse547d8bb2008-06-11 16:57:21 +010033fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
Divy Le Rayad586332008-11-26 15:37:50 -080034fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
35 cxgb3/t3c_psram-1.1.0.bin \
36 cxgb3/t3fw-7.0.0.bin
David Woodhouse0a2a7362008-05-29 19:50:06 +030037fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
David Woodhouse0f805b82008-05-29 16:39:16 +030038fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
David Woodhouse76770662008-05-26 23:01:27 +010039fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
David Woodhousea292f402008-05-29 14:48:34 +030040fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
41 ess/maestro3_assp_minisrc.fw
Jaswinder Singhd71792a2008-07-05 18:05:22 +053042fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
43 sb16/ima_adpcm_init.csp \
44 sb16/ima_adpcm_playback.csp \
45 sb16/ima_adpcm_capture.csp
David Woodhouse18ee6df2008-05-29 15:07:34 +030046fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
47 yamaha/ds1e_ctrl.fw
David Woodhousec4667742008-06-23 11:41:04 +010048fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
David Woodhouseae93a552008-05-30 16:19:39 +030049fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
50 emi26/bitstream.fw
David Woodhouseb8e24bf2008-05-30 17:35:47 +030051fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
52 emi62/spdif.fw emi62/midi.fw
David Woodhouse79682492008-05-29 17:17:17 +030053fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
54 kaweth/new_code_fix.bin \
55 kaweth/trigger_code_fix.bin
David Woodhouse2971c572008-05-30 14:04:03 +030056ifdef CONFIG_FIRMWARE_IN_KERNEL
57fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
58fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
59fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
60fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
61fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
62fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
63fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
64fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
65fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
66fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
67fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
68fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
69else
David Woodhoused25dc7f2008-07-15 22:54:04 -070070fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
David Woodhouse2971c572008-05-30 14:04:03 +030071 keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
72 keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
73 keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
74endif
David Woodhouse5f24e2d2008-05-30 18:49:51 +030075fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
Jaswinder Singh5b9ea932008-07-03 17:00:23 +053076fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
77 edgeport/down.fw edgeport/down2.fw
Jaswinder Singhd12b2192008-07-04 23:06:09 +053078fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
David Woodhouseec6752f2008-05-31 01:35:29 +030079fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
80 # whiteheat_loader_debug.fw
David Woodhouse3edbf982008-05-30 15:15:13 +030081fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
82fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
Jaswinder Singhfb54be82008-06-27 19:50:40 +053083fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
David Woodhouse04a33e42008-06-23 11:36:23 +010084fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
David Woodhouse88ecf812008-05-29 11:01:51 +030085
86fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
87
88# Directories which we _might_ need to create, so we have a rule for them.
89firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
David Woodhouse4d2acfb2008-05-23 13:58:12 +010090
91quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
92 cmd_mkdir = mkdir -p $@
93
94quiet_cmd_ihex = IHEX $@
95 cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
96
David Woodhouse8bd6b222008-05-31 15:07:18 +030097quiet_cmd_ihex2fw = IHEX2FW $@
98 cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
99
David Woodhouse59890f72008-06-26 13:55:30 +0100100quiet_cmd_h16tofw = H16TOFW $@
101 cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
102
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100103quiet_cmd_fwbin = MK_FW $@
104 cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
105 FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
106 firmware/%.gen.S,%,$@))))"; \
107 ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
108 ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
109 PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
110 echo "/* Generated by firmware/Makefile */" > $@;\
111 echo " .section .rodata" >>$@;\
112 echo " .p2align $${ASM_ALIGN}" >>$@;\
113 echo "_fw_$${FWSTR}_bin:" >>$@;\
114 echo " .incbin \"$(2)\"" >>$@;\
115 echo "_fw_end:" >>$@;\
116 echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
117 echo " .p2align $${ASM_ALIGN}" >>$@;\
118 echo "_fw_$${FWSTR}_name:" >>$@;\
119 echo " .string \"$$FWNAME\"" >>$@;\
120 echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
121 echo " .p2align $${ASM_ALIGN}" >>$@;\
122 echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
123 echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
124 echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
125
126# One of these files will change, or come into existence, whenever
127# the configuration changes between 32-bit and 64-bit. The .S files
128# need to change when that happens.
129wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
130 include/config/ppc32.h include/config/ppc64.h \
131 include/config/superh32.h include/config/superh64.h \
132 include/config/x86_32.h include/config/x86_64.h)
133
134# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
135# It'll end up depending on these targets, so make them a PHONY rule which
136# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
137PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
138$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
139 @true
140
141# For the $$(dir %) trick, where we need % to be expanded first.
142.SECONDEXPANSION:
143
144$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
145 | $(objtree)/$$(dir %)
146 $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
147$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
David Woodhouse50515af2008-07-14 17:50:24 -0700148 include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100149 $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
150
151# The .o files depend on the binaries directly; the .S files don't.
152$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
153$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
154
David Woodhouse8bd6b222008-05-31 15:07:18 +0300155# .ihex is used just as a simple way to hold binary files in a source tree
156# where binaries are frowned upon. They are directly converted with objcopy.
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100157$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
158 $(call cmd,ihex)
159
David Woodhouse1cede1a2008-09-01 10:54:46 +0100160# Don't depend on ihex2fw if we're installing and it already exists.
161# Putting it after | in the dependencies doesn't seem sufficient when
162# we're installing after a cross-compile, because ihex2fw has dependencies
163# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
164# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
165# is exported read-only for someone to run 'make install'.
166ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
167ihex2fw_dep :=
168else
169ihex2fw_dep := $(obj)/ihex2fw
170endif
171
David Woodhouse8bd6b222008-05-31 15:07:18 +0300172# .HEX is also Intel HEX, but where the offset and length in each record
173# is actually meaningful, because the firmware has to be loaded in a certain
174# order rather than as a single binary blob. Thus, we convert them into our
175# more compact binary representation of ihex records (<linux/ihex.h>)
David Woodhouse1cede1a2008-09-01 10:54:46 +0100176$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
David Woodhouse8bd6b222008-05-31 15:07:18 +0300177 $(call cmd,ihex2fw)
178
David Woodhouse59890f72008-06-26 13:55:30 +0100179# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
David Woodhouse1cede1a2008-09-01 10:54:46 +0100180$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
David Woodhouse59890f72008-06-26 13:55:30 +0100181 $(call cmd,h16tofw)
182
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100183$(firmware-dirs):
184 $(call cmd,mkdir)
185
David Woodhouse88ecf812008-05-29 11:01:51 +0300186obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
187obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100188
189# Remove .S files and binaries created from ihex
190# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
191targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
192 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
193
194# Without this, built-in.o won't be created when it's empty, and the
195# final vmlinux link will fail.
196obj-n := dummy
David Woodhouse8bd6b222008-05-31 15:07:18 +0300197
198hostprogs-y := ihex2fw