David Brownell | 1abb0dc | 2006-06-25 05:48:17 -0700 | [diff] [blame] | 1 | /* |
| 2 | * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. |
| 3 | * |
| 4 | * Copyright (C) 2005 James Chapman (ds1337 core) |
| 5 | * Copyright (C) 2006 David Brownell |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/slab.h> |
| 15 | #include <linux/i2c.h> |
| 16 | #include <linux/string.h> |
| 17 | #include <linux/rtc.h> |
| 18 | #include <linux/bcd.h> |
| 19 | |
| 20 | |
| 21 | |
| 22 | /* We can't determine type by probing, but if we expect pre-Linux code |
| 23 | * to have set the chip up as a clock (turning on the oscillator and |
| 24 | * setting the date and time), Linux can ignore the non-clock features. |
| 25 | * That's a natural job for a factory or repair bench. |
| 26 | * |
| 27 | * If the I2C "force" mechanism is used, we assume the chip is a ds1337. |
| 28 | * (Much better would be board-specific tables of I2C devices, along with |
| 29 | * the platform_data drivers would use to sort such issues out.) |
| 30 | */ |
| 31 | enum ds_type { |
| 32 | unknown = 0, |
| 33 | ds_1307, /* or ds1338, ... */ |
| 34 | ds_1337, /* or ds1339, ... */ |
| 35 | ds_1340, /* or st m41t00, ... */ |
| 36 | // rs5c372 too? different address... |
| 37 | }; |
| 38 | |
| 39 | static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END }; |
| 40 | |
| 41 | I2C_CLIENT_INSMOD; |
| 42 | |
| 43 | |
| 44 | |
| 45 | /* RTC registers don't differ much, except for the century flag */ |
| 46 | #define DS1307_REG_SECS 0x00 /* 00-59 */ |
| 47 | # define DS1307_BIT_CH 0x80 |
| 48 | #define DS1307_REG_MIN 0x01 /* 00-59 */ |
| 49 | #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */ |
| 50 | # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */ |
| 51 | # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */ |
| 52 | #define DS1307_REG_WDAY 0x03 /* 01-07 */ |
| 53 | #define DS1307_REG_MDAY 0x04 /* 01-31 */ |
| 54 | #define DS1307_REG_MONTH 0x05 /* 01-12 */ |
| 55 | # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */ |
| 56 | #define DS1307_REG_YEAR 0x06 /* 00-99 */ |
| 57 | |
| 58 | /* Other registers (control, status, alarms, trickle charge, NVRAM, etc) |
| 59 | * start at 7, and they differ a lot. Only control and status matter for RTC; |
| 60 | * be careful using them. |
| 61 | */ |
| 62 | #define DS1307_REG_CONTROL 0x07 |
| 63 | # define DS1307_BIT_OUT 0x80 |
| 64 | # define DS1307_BIT_SQWE 0x10 |
| 65 | # define DS1307_BIT_RS1 0x02 |
| 66 | # define DS1307_BIT_RS0 0x01 |
| 67 | #define DS1337_REG_CONTROL 0x0e |
| 68 | # define DS1337_BIT_nEOSC 0x80 |
| 69 | # define DS1337_BIT_RS2 0x10 |
| 70 | # define DS1337_BIT_RS1 0x08 |
| 71 | # define DS1337_BIT_INTCN 0x04 |
| 72 | # define DS1337_BIT_A2IE 0x02 |
| 73 | # define DS1337_BIT_A1IE 0x01 |
| 74 | #define DS1337_REG_STATUS 0x0f |
| 75 | # define DS1337_BIT_OSF 0x80 |
| 76 | # define DS1337_BIT_A2I 0x02 |
| 77 | # define DS1337_BIT_A1I 0x01 |
| 78 | #define DS1339_REG_TRICKLE 0x10 |
| 79 | |
| 80 | |
| 81 | |
| 82 | struct ds1307 { |
| 83 | u8 reg_addr; |
| 84 | u8 regs[8]; |
| 85 | enum ds_type type; |
| 86 | struct i2c_msg msg[2]; |
| 87 | struct i2c_client client; |
| 88 | struct rtc_device *rtc; |
| 89 | }; |
| 90 | |
| 91 | |
| 92 | static int ds1307_get_time(struct device *dev, struct rtc_time *t) |
| 93 | { |
| 94 | struct ds1307 *ds1307 = dev_get_drvdata(dev); |
| 95 | int tmp; |
| 96 | |
| 97 | /* read the RTC registers all at once */ |
| 98 | ds1307->msg[1].flags = I2C_M_RD; |
| 99 | ds1307->msg[1].len = 7; |
| 100 | |
| 101 | tmp = i2c_transfer(ds1307->client.adapter, ds1307->msg, 2); |
| 102 | if (tmp != 2) { |
| 103 | dev_err(dev, "%s error %d\n", "read", tmp); |
| 104 | return -EIO; |
| 105 | } |
| 106 | |
| 107 | dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", |
| 108 | "read", |
| 109 | ds1307->regs[0], ds1307->regs[1], |
| 110 | ds1307->regs[2], ds1307->regs[3], |
| 111 | ds1307->regs[4], ds1307->regs[5], |
| 112 | ds1307->regs[6]); |
| 113 | |
| 114 | t->tm_sec = BCD2BIN(ds1307->regs[DS1307_REG_SECS] & 0x7f); |
| 115 | t->tm_min = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); |
| 116 | tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; |
| 117 | t->tm_hour = BCD2BIN(tmp); |
| 118 | t->tm_wday = BCD2BIN(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; |
| 119 | t->tm_mday = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); |
| 120 | tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; |
| 121 | t->tm_mon = BCD2BIN(tmp) - 1; |
| 122 | |
| 123 | /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ |
| 124 | t->tm_year = BCD2BIN(ds1307->regs[DS1307_REG_YEAR]) + 100; |
| 125 | |
| 126 | dev_dbg(dev, "%s secs=%d, mins=%d, " |
| 127 | "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", |
| 128 | "read", t->tm_sec, t->tm_min, |
| 129 | t->tm_hour, t->tm_mday, |
| 130 | t->tm_mon, t->tm_year, t->tm_wday); |
| 131 | |
| 132 | return 0; |
| 133 | } |
| 134 | |
| 135 | static int ds1307_set_time(struct device *dev, struct rtc_time *t) |
| 136 | { |
| 137 | struct ds1307 *ds1307 = dev_get_drvdata(dev); |
| 138 | int result; |
| 139 | int tmp; |
| 140 | u8 *buf = ds1307->regs; |
| 141 | |
| 142 | dev_dbg(dev, "%s secs=%d, mins=%d, " |
| 143 | "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", |
Jeff Garzik | 11966ad | 2006-10-04 04:41:53 -0400 | [diff] [blame] | 144 | "write", t->tm_sec, t->tm_min, |
| 145 | t->tm_hour, t->tm_mday, |
| 146 | t->tm_mon, t->tm_year, t->tm_wday); |
David Brownell | 1abb0dc | 2006-06-25 05:48:17 -0700 | [diff] [blame] | 147 | |
| 148 | *buf++ = 0; /* first register addr */ |
| 149 | buf[DS1307_REG_SECS] = BIN2BCD(t->tm_sec); |
| 150 | buf[DS1307_REG_MIN] = BIN2BCD(t->tm_min); |
| 151 | buf[DS1307_REG_HOUR] = BIN2BCD(t->tm_hour); |
| 152 | buf[DS1307_REG_WDAY] = BIN2BCD(t->tm_wday + 1); |
| 153 | buf[DS1307_REG_MDAY] = BIN2BCD(t->tm_mday); |
| 154 | buf[DS1307_REG_MONTH] = BIN2BCD(t->tm_mon + 1); |
| 155 | |
| 156 | /* assume 20YY not 19YY */ |
| 157 | tmp = t->tm_year - 100; |
| 158 | buf[DS1307_REG_YEAR] = BIN2BCD(tmp); |
| 159 | |
| 160 | if (ds1307->type == ds_1337) |
| 161 | buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; |
| 162 | else if (ds1307->type == ds_1340) |
| 163 | buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN |
| 164 | | DS1340_BIT_CENTURY; |
| 165 | |
| 166 | ds1307->msg[1].flags = 0; |
| 167 | ds1307->msg[1].len = 8; |
| 168 | |
| 169 | dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", |
| 170 | "write", buf[0], buf[1], buf[2], buf[3], |
| 171 | buf[4], buf[5], buf[6]); |
| 172 | |
| 173 | result = i2c_transfer(ds1307->client.adapter, &ds1307->msg[1], 1); |
| 174 | if (result != 1) { |
| 175 | dev_err(dev, "%s error %d\n", "write", tmp); |
| 176 | return -EIO; |
| 177 | } |
| 178 | return 0; |
| 179 | } |
| 180 | |
David Brownell | ff8371a | 2006-09-30 23:28:17 -0700 | [diff] [blame] | 181 | static const struct rtc_class_ops ds13xx_rtc_ops = { |
David Brownell | 1abb0dc | 2006-06-25 05:48:17 -0700 | [diff] [blame] | 182 | .read_time = ds1307_get_time, |
| 183 | .set_time = ds1307_set_time, |
| 184 | }; |
| 185 | |
| 186 | static struct i2c_driver ds1307_driver; |
| 187 | |
| 188 | static int __devinit |
| 189 | ds1307_detect(struct i2c_adapter *adapter, int address, int kind) |
| 190 | { |
| 191 | struct ds1307 *ds1307; |
| 192 | int err = -ENODEV; |
| 193 | struct i2c_client *client; |
| 194 | int tmp; |
| 195 | |
| 196 | if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) { |
| 197 | err = -ENOMEM; |
| 198 | goto exit; |
| 199 | } |
| 200 | |
| 201 | client = &ds1307->client; |
| 202 | client->addr = address; |
| 203 | client->adapter = adapter; |
| 204 | client->driver = &ds1307_driver; |
| 205 | client->flags = 0; |
| 206 | |
| 207 | i2c_set_clientdata(client, ds1307); |
| 208 | |
| 209 | ds1307->msg[0].addr = client->addr; |
| 210 | ds1307->msg[0].flags = 0; |
| 211 | ds1307->msg[0].len = 1; |
| 212 | ds1307->msg[0].buf = &ds1307->reg_addr; |
| 213 | |
| 214 | ds1307->msg[1].addr = client->addr; |
| 215 | ds1307->msg[1].flags = I2C_M_RD; |
| 216 | ds1307->msg[1].len = sizeof(ds1307->regs); |
| 217 | ds1307->msg[1].buf = ds1307->regs; |
| 218 | |
| 219 | /* HACK: "force" implies "needs ds1337-style-oscillator setup" */ |
| 220 | if (kind >= 0) { |
| 221 | ds1307->type = ds_1337; |
| 222 | |
| 223 | ds1307->reg_addr = DS1337_REG_CONTROL; |
| 224 | ds1307->msg[1].len = 2; |
| 225 | |
| 226 | tmp = i2c_transfer(client->adapter, ds1307->msg, 2); |
| 227 | if (tmp != 2) { |
| 228 | pr_debug("read error %d\n", tmp); |
| 229 | err = -EIO; |
| 230 | goto exit_free; |
| 231 | } |
| 232 | |
| 233 | ds1307->reg_addr = 0; |
| 234 | ds1307->msg[1].len = sizeof(ds1307->regs); |
| 235 | |
| 236 | /* oscillator is off; need to turn it on */ |
| 237 | if ((ds1307->regs[0] & DS1337_BIT_nEOSC) |
| 238 | || (ds1307->regs[1] & DS1337_BIT_OSF)) { |
| 239 | printk(KERN_ERR "no ds1337 oscillator code\n"); |
| 240 | goto exit_free; |
| 241 | } |
| 242 | } else |
| 243 | ds1307->type = ds_1307; |
| 244 | |
| 245 | read_rtc: |
| 246 | /* read RTC registers */ |
| 247 | |
| 248 | tmp = i2c_transfer(client->adapter, ds1307->msg, 2); |
| 249 | if (tmp != 2) { |
| 250 | pr_debug("read error %d\n", tmp); |
| 251 | err = -EIO; |
| 252 | goto exit_free; |
| 253 | } |
| 254 | |
| 255 | /* minimal sanity checking; some chips (like DS1340) don't |
| 256 | * specify the extra bits as must-be-zero, but there are |
| 257 | * still a few values that are clearly out-of-range. |
| 258 | */ |
| 259 | tmp = ds1307->regs[DS1307_REG_SECS]; |
| 260 | if (tmp & DS1307_BIT_CH) { |
| 261 | if (ds1307->type && ds1307->type != ds_1307) { |
| 262 | pr_debug("not a ds1307?\n"); |
| 263 | goto exit_free; |
| 264 | } |
| 265 | ds1307->type = ds_1307; |
| 266 | |
| 267 | /* this partial initialization should work for ds1307, |
| 268 | * ds1338, ds1340, st m41t00, and more. |
| 269 | */ |
| 270 | dev_warn(&client->dev, "oscillator started; SET TIME!\n"); |
| 271 | i2c_smbus_write_byte_data(client, 0, 0); |
| 272 | goto read_rtc; |
| 273 | } |
| 274 | tmp = BCD2BIN(tmp & 0x7f); |
| 275 | if (tmp > 60) |
| 276 | goto exit_free; |
| 277 | tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); |
| 278 | if (tmp > 60) |
| 279 | goto exit_free; |
| 280 | |
| 281 | tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); |
| 282 | if (tmp == 0 || tmp > 31) |
| 283 | goto exit_free; |
| 284 | |
| 285 | tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f); |
| 286 | if (tmp == 0 || tmp > 12) |
| 287 | goto exit_free; |
| 288 | |
| 289 | /* force into in 24 hour mode (most chips) or |
| 290 | * disable century bit (ds1340) |
| 291 | */ |
| 292 | tmp = ds1307->regs[DS1307_REG_HOUR]; |
| 293 | if (tmp & (1 << 6)) { |
| 294 | if (tmp & (1 << 5)) |
| 295 | tmp = BCD2BIN(tmp & 0x1f) + 12; |
| 296 | else |
| 297 | tmp = BCD2BIN(tmp); |
| 298 | i2c_smbus_write_byte_data(client, |
| 299 | DS1307_REG_HOUR, |
| 300 | BIN2BCD(tmp)); |
| 301 | } |
| 302 | |
| 303 | /* FIXME chips like 1337 can generate alarm irqs too; those are |
| 304 | * worth exposing through the API (especially when the irq is |
| 305 | * wakeup-capable). |
| 306 | */ |
| 307 | |
| 308 | switch (ds1307->type) { |
| 309 | case unknown: |
| 310 | strlcpy(client->name, "unknown", I2C_NAME_SIZE); |
| 311 | break; |
| 312 | case ds_1307: |
| 313 | strlcpy(client->name, "ds1307", I2C_NAME_SIZE); |
| 314 | break; |
| 315 | case ds_1337: |
| 316 | strlcpy(client->name, "ds1337", I2C_NAME_SIZE); |
| 317 | break; |
| 318 | case ds_1340: |
| 319 | strlcpy(client->name, "ds1340", I2C_NAME_SIZE); |
| 320 | break; |
| 321 | } |
| 322 | |
| 323 | /* Tell the I2C layer a new client has arrived */ |
| 324 | if ((err = i2c_attach_client(client))) |
| 325 | goto exit_free; |
| 326 | |
| 327 | ds1307->rtc = rtc_device_register(client->name, &client->dev, |
| 328 | &ds13xx_rtc_ops, THIS_MODULE); |
| 329 | if (IS_ERR(ds1307->rtc)) { |
| 330 | err = PTR_ERR(ds1307->rtc); |
| 331 | dev_err(&client->dev, |
| 332 | "unable to register the class device\n"); |
| 333 | goto exit_detach; |
| 334 | } |
| 335 | |
| 336 | return 0; |
| 337 | |
| 338 | exit_detach: |
| 339 | i2c_detach_client(client); |
| 340 | exit_free: |
| 341 | kfree(ds1307); |
| 342 | exit: |
| 343 | return err; |
| 344 | } |
| 345 | |
| 346 | static int __devinit |
| 347 | ds1307_attach_adapter(struct i2c_adapter *adapter) |
| 348 | { |
| 349 | if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) |
| 350 | return 0; |
| 351 | return i2c_probe(adapter, &addr_data, ds1307_detect); |
| 352 | } |
| 353 | |
| 354 | static int __devexit ds1307_detach_client(struct i2c_client *client) |
| 355 | { |
| 356 | int err; |
| 357 | struct ds1307 *ds1307 = i2c_get_clientdata(client); |
| 358 | |
| 359 | rtc_device_unregister(ds1307->rtc); |
| 360 | if ((err = i2c_detach_client(client))) |
| 361 | return err; |
| 362 | kfree(ds1307); |
| 363 | return 0; |
| 364 | } |
| 365 | |
| 366 | static struct i2c_driver ds1307_driver = { |
| 367 | .driver = { |
| 368 | .name = "ds1307", |
| 369 | .owner = THIS_MODULE, |
| 370 | }, |
| 371 | .attach_adapter = ds1307_attach_adapter, |
| 372 | .detach_client = __devexit_p(ds1307_detach_client), |
| 373 | }; |
| 374 | |
| 375 | static int __init ds1307_init(void) |
| 376 | { |
| 377 | return i2c_add_driver(&ds1307_driver); |
| 378 | } |
| 379 | module_init(ds1307_init); |
| 380 | |
| 381 | static void __exit ds1307_exit(void) |
| 382 | { |
| 383 | i2c_del_driver(&ds1307_driver); |
| 384 | } |
| 385 | module_exit(ds1307_exit); |
| 386 | |
| 387 | MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); |
| 388 | MODULE_LICENSE("GPL"); |