blob: 847bd7f58eedb08862a862bbf32613d12c805ed3 [file] [log] [blame]
Ivo van Doorn95ea3622007-09-25 17:57:13 -07001/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2500usb
23 Abstract: rt2500usb device specific routines.
24 Supported chipsets: RT2570.
25 */
26
27/*
28 * Set enviroment defines for rt2x00.h
29 */
30#define DRV_NAME "rt2500usb"
31
32#include <linux/delay.h>
33#include <linux/etherdevice.h>
34#include <linux/init.h>
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/usb.h>
38
39#include "rt2x00.h"
40#include "rt2x00usb.h"
41#include "rt2500usb.h"
42
43/*
44 * Register access.
45 * All access to the CSR registers will go through the methods
46 * rt2500usb_register_read and rt2500usb_register_write.
47 * BBP and RF register require indirect register access,
48 * and use the CSR registers BBPCSR and RFCSR to achieve this.
49 * These indirect registers work with busy bits,
50 * and we will try maximal REGISTER_BUSY_COUNT times to access
51 * the register while taking a REGISTER_BUSY_DELAY us delay
52 * between each attampt. When the busy bit is still set at that time,
53 * the access attempt is considered to have failed,
54 * and we will print an error.
55 */
56static inline void rt2500usb_register_read(const struct rt2x00_dev *rt2x00dev,
57 const unsigned int offset,
58 u16 *value)
59{
60 __le16 reg;
61 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
62 USB_VENDOR_REQUEST_IN, offset,
63 &reg, sizeof(u16), REGISTER_TIMEOUT);
64 *value = le16_to_cpu(reg);
65}
66
67static inline void rt2500usb_register_multiread(const struct rt2x00_dev
68 *rt2x00dev,
69 const unsigned int offset,
70 void *value, const u16 length)
71{
72 int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
73 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
74 USB_VENDOR_REQUEST_IN, offset,
75 value, length, timeout);
76}
77
78static inline void rt2500usb_register_write(const struct rt2x00_dev *rt2x00dev,
79 const unsigned int offset,
80 u16 value)
81{
82 __le16 reg = cpu_to_le16(value);
83 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
84 USB_VENDOR_REQUEST_OUT, offset,
85 &reg, sizeof(u16), REGISTER_TIMEOUT);
86}
87
88static inline void rt2500usb_register_multiwrite(const struct rt2x00_dev
89 *rt2x00dev,
90 const unsigned int offset,
91 void *value, const u16 length)
92{
93 int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
94 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
95 USB_VENDOR_REQUEST_OUT, offset,
96 value, length, timeout);
97}
98
99static u16 rt2500usb_bbp_check(const struct rt2x00_dev *rt2x00dev)
100{
101 u16 reg;
102 unsigned int i;
103
104 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
105 rt2500usb_register_read(rt2x00dev, PHY_CSR8, &reg);
106 if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
107 break;
108 udelay(REGISTER_BUSY_DELAY);
109 }
110
111 return reg;
112}
113
114static void rt2500usb_bbp_write(const struct rt2x00_dev *rt2x00dev,
115 const unsigned int word, const u8 value)
116{
117 u16 reg;
118
119 /*
120 * Wait until the BBP becomes ready.
121 */
122 reg = rt2500usb_bbp_check(rt2x00dev);
123 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
124 ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
125 return;
126 }
127
128 /*
129 * Write the data into the BBP.
130 */
131 reg = 0;
132 rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
133 rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
134 rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
135
136 rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
137}
138
139static void rt2500usb_bbp_read(const struct rt2x00_dev *rt2x00dev,
140 const unsigned int word, u8 *value)
141{
142 u16 reg;
143
144 /*
145 * Wait until the BBP becomes ready.
146 */
147 reg = rt2500usb_bbp_check(rt2x00dev);
148 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
149 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
150 return;
151 }
152
153 /*
154 * Write the request into the BBP.
155 */
156 reg = 0;
157 rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
158 rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
159
160 rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
161
162 /*
163 * Wait until the BBP becomes ready.
164 */
165 reg = rt2500usb_bbp_check(rt2x00dev);
166 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
167 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
168 *value = 0xff;
169 return;
170 }
171
172 rt2500usb_register_read(rt2x00dev, PHY_CSR7, &reg);
173 *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
174}
175
176static void rt2500usb_rf_write(const struct rt2x00_dev *rt2x00dev,
177 const unsigned int word, const u32 value)
178{
179 u16 reg;
180 unsigned int i;
181
182 if (!word)
183 return;
184
185 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
186 rt2500usb_register_read(rt2x00dev, PHY_CSR10, &reg);
187 if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
188 goto rf_write;
189 udelay(REGISTER_BUSY_DELAY);
190 }
191
192 ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
193 return;
194
195rf_write:
196 reg = 0;
197 rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
198 rt2500usb_register_write(rt2x00dev, PHY_CSR9, reg);
199
200 reg = 0;
201 rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
202 rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
203 rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
204 rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
205
206 rt2500usb_register_write(rt2x00dev, PHY_CSR10, reg);
207 rt2x00_rf_write(rt2x00dev, word, value);
208}
209
210#ifdef CONFIG_RT2X00_LIB_DEBUGFS
211#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) )
212
213static void rt2500usb_read_csr(const struct rt2x00_dev *rt2x00dev,
214 const unsigned int word, u32 *data)
215{
216 rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data);
217}
218
219static void rt2500usb_write_csr(const struct rt2x00_dev *rt2x00dev,
220 const unsigned int word, u32 data)
221{
222 rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
223}
224
225static const struct rt2x00debug rt2500usb_rt2x00debug = {
226 .owner = THIS_MODULE,
227 .csr = {
228 .read = rt2500usb_read_csr,
229 .write = rt2500usb_write_csr,
230 .word_size = sizeof(u16),
231 .word_count = CSR_REG_SIZE / sizeof(u16),
232 },
233 .eeprom = {
234 .read = rt2x00_eeprom_read,
235 .write = rt2x00_eeprom_write,
236 .word_size = sizeof(u16),
237 .word_count = EEPROM_SIZE / sizeof(u16),
238 },
239 .bbp = {
240 .read = rt2500usb_bbp_read,
241 .write = rt2500usb_bbp_write,
242 .word_size = sizeof(u8),
243 .word_count = BBP_SIZE / sizeof(u8),
244 },
245 .rf = {
246 .read = rt2x00_rf_read,
247 .write = rt2500usb_rf_write,
248 .word_size = sizeof(u32),
249 .word_count = RF_SIZE / sizeof(u32),
250 },
251};
252#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
253
254/*
255 * Configuration handlers.
256 */
257static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
258{
259 __le16 reg[3];
260
261 memset(&reg, 0, sizeof(reg));
262 memcpy(&reg, addr, ETH_ALEN);
263
264 /*
265 * The MAC address is passed to us as an array of bytes,
266 * that array is little endian, so no need for byte ordering.
267 */
268 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, &reg, sizeof(reg));
269}
270
271static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
272{
273 __le16 reg[3];
274
275 memset(&reg, 0, sizeof(reg));
276 memcpy(&reg, bssid, ETH_ALEN);
277
278 /*
279 * The BSSID is passed to us as an array of bytes,
280 * that array is little endian, so no need for byte ordering.
281 */
282 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, &reg, sizeof(reg));
283}
284
285static void rt2500usb_config_packet_filter(struct rt2x00_dev *rt2x00dev,
286 const unsigned int filter)
287{
288 int promisc = !!(filter & IFF_PROMISC);
289 int multicast = !!(filter & IFF_MULTICAST);
290 int broadcast = !!(filter & IFF_BROADCAST);
291 u16 reg;
292
293 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
294 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME, !promisc);
295 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST, !multicast);
296 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_BROADCAST, !broadcast);
297 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
298}
299
300static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
301{
302 u16 reg;
303
304 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
305
306 /*
307 * Apply hardware packet filter.
308 */
309 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
310
311 if (!is_monitor_present(&rt2x00dev->interface) &&
312 (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
313 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS, 1);
314 else
315 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS, 0);
316
317 /*
318 * If there is a non-monitor interface present
319 * the packet should be strict (even if a monitor interface is present!).
320 * When there is only 1 interface present which is in monitor mode
321 * we should start accepting _all_ frames.
322 */
323 if (is_interface_present(&rt2x00dev->interface)) {
324 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC, 1);
325 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL, 1);
326 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL, 1);
327 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
328 } else if (is_monitor_present(&rt2x00dev->interface)) {
329 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC, 0);
330 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL, 0);
331 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL, 0);
332 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 0);
333 }
334
335 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
336
337 /*
338 * Enable beacon config
339 */
340 rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
341 rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET,
342 (PREAMBLE + get_duration(IEEE80211_HEADER, 2)) >> 6);
343 if (type == IEEE80211_IF_TYPE_STA)
344 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW, 0);
345 else
346 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW, 2);
347 rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
348
349 /*
350 * Enable synchronisation.
351 */
352 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
353 rt2x00_set_field16(&reg, TXRX_CSR18_OFFSET, 0);
354 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
355
356 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
357 if (is_interface_present(&rt2x00dev->interface)) {
358 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
359 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
360 }
361
362 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
363 if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
364 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 2);
365 else if (type == IEEE80211_IF_TYPE_STA)
366 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 1);
367 else if (is_monitor_present(&rt2x00dev->interface) &&
368 !is_interface_present(&rt2x00dev->interface))
369 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 0);
370
371 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
372}
373
374static void rt2500usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
375{
376 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
377 u16 reg;
378 u16 value;
379 u16 preamble;
380
381 if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
382 preamble = SHORT_PREAMBLE;
383 else
384 preamble = PREAMBLE;
385
386 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
387
388 rt2500usb_register_write(rt2x00dev, TXRX_CSR11, reg);
389
390 rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
391 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
392 SHORT_DIFS : DIFS) +
393 PLCP + preamble + get_duration(ACK_SIZE, 10);
394 rt2x00_set_field16(&reg, TXRX_CSR1_ACK_TIMEOUT, value);
395 rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
396
397 rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
398 if (preamble == SHORT_PREAMBLE)
399 rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE, 1);
400 else
401 rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE, 0);
402 rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
403}
404
405static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev,
406 const int phymode)
407{
408 struct ieee80211_hw_mode *mode;
409 struct ieee80211_rate *rate;
410
411 if (phymode == MODE_IEEE80211A)
412 rt2x00dev->curr_hwmode = HWMODE_A;
413 else if (phymode == MODE_IEEE80211B)
414 rt2x00dev->curr_hwmode = HWMODE_B;
415 else
416 rt2x00dev->curr_hwmode = HWMODE_G;
417
418 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
419 rate = &mode->rates[mode->num_rates - 1];
420
421 rt2500usb_config_rate(rt2x00dev, rate->val2);
422
423 if (phymode == MODE_IEEE80211B) {
424 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b);
425 rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040);
426 } else {
427 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005);
428 rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c);
429 }
430}
431
432static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
433 const int index, const int channel,
434 const int txpower)
435{
436 struct rf_channel reg;
437
438 /*
439 * Fill rf_reg structure.
440 */
441 memcpy(&reg, &rt2x00dev->spec.channels[index], sizeof(reg));
442
443 /*
444 * Set TXpower.
445 */
446 rt2x00_set_field32(&reg.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
447
448 /*
449 * For RT2525E we should first set the channel to half band higher.
450 */
451 if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
452 static const u32 vals[] = {
453 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
454 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
455 0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
456 0x00000902, 0x00000906
457 };
458
459 rt2500usb_rf_write(rt2x00dev, 2, vals[channel - 1]);
460 if (reg.rf4)
461 rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
462 }
463
464 rt2500usb_rf_write(rt2x00dev, 1, reg.rf1);
465 rt2500usb_rf_write(rt2x00dev, 2, reg.rf2);
466 rt2500usb_rf_write(rt2x00dev, 3, reg.rf3);
467 if (reg.rf4)
468 rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
469}
470
471static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
472 const int txpower)
473{
474 u32 rf3;
475
476 rt2x00_rf_read(rt2x00dev, 3, &rf3);
477 rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
478 rt2500usb_rf_write(rt2x00dev, 3, rf3);
479}
480
481static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
482 const int antenna_tx, const int antenna_rx)
483{
484 u8 r2;
485 u8 r14;
486 u16 csr5;
487 u16 csr6;
488
489 rt2500usb_bbp_read(rt2x00dev, 2, &r2);
490 rt2500usb_bbp_read(rt2x00dev, 14, &r14);
491 rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
492 rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
493
494 /*
495 * Configure the TX antenna.
496 */
497 switch (antenna_tx) {
498 case ANTENNA_SW_DIVERSITY:
499 case ANTENNA_HW_DIVERSITY:
500 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
501 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
502 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
503 break;
504 case ANTENNA_A:
505 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
506 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
507 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
508 break;
509 case ANTENNA_B:
510 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
511 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
512 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
513 break;
514 }
515
516 /*
517 * Configure the RX antenna.
518 */
519 switch (antenna_rx) {
520 case ANTENNA_SW_DIVERSITY:
521 case ANTENNA_HW_DIVERSITY:
522 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
523 break;
524 case ANTENNA_A:
525 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
526 break;
527 case ANTENNA_B:
528 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
529 break;
530 }
531
532 /*
533 * RT2525E and RT5222 need to flip TX I/Q
534 */
535 if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
536 rt2x00_rf(&rt2x00dev->chip, RF5222)) {
537 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
538 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
539 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
540
541 /*
542 * RT2525E does not need RX I/Q Flip.
543 */
544 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
545 rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
546 } else {
547 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
548 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
549 }
550
551 rt2500usb_bbp_write(rt2x00dev, 2, r2);
552 rt2500usb_bbp_write(rt2x00dev, 14, r14);
553 rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
554 rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
555}
556
557static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
558 const int short_slot_time,
559 const int beacon_int)
560{
561 u16 reg;
562
563 rt2500usb_register_write(rt2x00dev, MAC_CSR10,
564 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
565
566 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
567 rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL, beacon_int * 4);
568 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
569}
570
571static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
572 const unsigned int flags,
573 struct ieee80211_conf *conf)
574{
575 int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
576
577 if (flags & CONFIG_UPDATE_PHYMODE)
578 rt2500usb_config_phymode(rt2x00dev, conf->phymode);
579 if (flags & CONFIG_UPDATE_CHANNEL)
580 rt2500usb_config_channel(rt2x00dev, conf->channel_val,
581 conf->channel, conf->power_level);
582 if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
583 rt2500usb_config_txpower(rt2x00dev, conf->power_level);
584 if (flags & CONFIG_UPDATE_ANTENNA)
585 rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel_tx,
586 conf->antenna_sel_rx);
587 if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
588 rt2500usb_config_duration(rt2x00dev, short_slot_time,
589 conf->beacon_int);
590}
591
592/*
593 * LED functions.
594 */
595static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev)
596{
597 u16 reg;
598
599 rt2500usb_register_read(rt2x00dev, MAC_CSR21, &reg);
600 rt2x00_set_field16(&reg, MAC_CSR21_ON_PERIOD, 70);
601 rt2x00_set_field16(&reg, MAC_CSR21_OFF_PERIOD, 30);
602 rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg);
603
604 rt2500usb_register_read(rt2x00dev, MAC_CSR20, &reg);
605
606 if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
607 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 1);
608 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 0);
609 } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
610 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 0);
611 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 1);
612 } else {
613 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 1);
614 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 1);
615 }
616
617 rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
618}
619
620static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev)
621{
622 u16 reg;
623
624 rt2500usb_register_read(rt2x00dev, MAC_CSR20, &reg);
625 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 0);
626 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 0);
627 rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
628}
629
630/*
631 * Link tuning
632 */
633static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev)
634{
635 u16 reg;
636
637 /*
638 * Update FCS error count from register.
639 */
640 rt2500usb_register_read(rt2x00dev, STA_CSR0, &reg);
641 rt2x00dev->link.rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
642
643 /*
644 * Update False CCA count from register.
645 */
646 rt2500usb_register_read(rt2x00dev, STA_CSR3, &reg);
647 rt2x00dev->link.false_cca =
648 rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
649}
650
651static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
652{
653 u16 eeprom;
654 u16 value;
655
656 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
657 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
658 rt2500usb_bbp_write(rt2x00dev, 24, value);
659
660 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
661 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
662 rt2500usb_bbp_write(rt2x00dev, 25, value);
663
664 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
665 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
666 rt2500usb_bbp_write(rt2x00dev, 61, value);
667
668 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
669 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
670 rt2500usb_bbp_write(rt2x00dev, 17, value);
671
672 rt2x00dev->link.vgc_level = value;
673}
674
675static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
676{
677 int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
678 u16 bbp_thresh;
679 u16 vgc_bound;
680 u16 sens;
681 u16 r24;
682 u16 r25;
683 u16 r61;
684 u16 r17_sens;
685 u8 r17;
686 u8 up_bound;
687 u8 low_bound;
688
689 /*
690 * Determine the BBP tuning threshold and correctly
691 * set BBP 24, 25 and 61.
692 */
693 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
694 bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
695
696 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
697 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
698 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
699
700 if ((rssi + bbp_thresh) > 0) {
701 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
702 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
703 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
704 } else {
705 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
706 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
707 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
708 }
709
710 rt2500usb_bbp_write(rt2x00dev, 24, r24);
711 rt2500usb_bbp_write(rt2x00dev, 25, r25);
712 rt2500usb_bbp_write(rt2x00dev, 61, r61);
713
714 /*
715 * Read current r17 value, as well as the sensitivity values
716 * for the r17 register.
717 */
718 rt2500usb_bbp_read(rt2x00dev, 17, &r17);
719 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
720
721 /*
722 * A too low RSSI will cause too much false CCA which will
723 * then corrupt the R17 tuning. To remidy this the tuning should
724 * be stopped (While making sure the R17 value will not exceed limits)
725 */
726 if (rssi >= -40) {
727 if (r17 != 0x60)
728 rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
729 return;
730 }
731
732 /*
733 * Special big-R17 for short distance
734 */
735 if (rssi >= -58) {
736 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
737 if (r17 != sens)
738 rt2500usb_bbp_write(rt2x00dev, 17, sens);
739 return;
740 }
741
742 /*
743 * Special mid-R17 for middle distance
744 */
745 if (rssi >= -74) {
746 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
747 if (r17 != sens)
748 rt2500usb_bbp_write(rt2x00dev, 17, sens);
749 return;
750 }
751
752 /*
753 * Leave short or middle distance condition, restore r17
754 * to the dynamic tuning range.
755 */
756 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
757 vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
758
759 low_bound = 0x32;
760 if (rssi >= -77)
761 up_bound = vgc_bound;
762 else
763 up_bound = vgc_bound - (-77 - rssi);
764
765 if (up_bound < low_bound)
766 up_bound = low_bound;
767
768 if (r17 > up_bound) {
769 rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
770 rt2x00dev->link.vgc_level = up_bound;
771 } else if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) {
772 rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
773 rt2x00dev->link.vgc_level = r17;
774 } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) {
775 rt2500usb_bbp_write(rt2x00dev, 17, --r17);
776 rt2x00dev->link.vgc_level = r17;
777 }
778}
779
780/*
781 * Initialization functions.
782 */
783static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
784{
785 u16 reg;
786
787 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
788 USB_MODE_TEST, REGISTER_TIMEOUT);
789 rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
790 0x00f0, REGISTER_TIMEOUT);
791
792 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
793 rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
794 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
795
796 rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
797 rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
798
799 rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
800 rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 1);
801 rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 1);
802 rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
803 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
804
805 rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
806 rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
807 rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
808 rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
809 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
810
811 rt2500usb_register_read(rt2x00dev, TXRX_CSR5, &reg);
812 rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0, 13);
813 rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0_VALID, 1);
814 rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1, 12);
815 rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1_VALID, 1);
816 rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
817
818 rt2500usb_register_read(rt2x00dev, TXRX_CSR6, &reg);
819 rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0, 10);
820 rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0_VALID, 1);
821 rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1, 11);
822 rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1_VALID, 1);
823 rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
824
825 rt2500usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
826 rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0, 7);
827 rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0_VALID, 1);
828 rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1, 6);
829 rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1_VALID, 1);
830 rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
831
832 rt2500usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
833 rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0, 5);
834 rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0_VALID, 1);
835 rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1, 0);
836 rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
837 rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
838
839 rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
840 rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
841
842 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
843 return -EBUSY;
844
845 rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
846 rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
847 rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
848 rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
849 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
850
851 if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
852 rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
853 reg &= ~0x0002;
854 } else {
855 reg = 0x3002;
856 }
857 rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
858
859 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
860 rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
861 rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
862 rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
863
864 rt2500usb_register_read(rt2x00dev, MAC_CSR8, &reg);
865 rt2x00_set_field16(&reg, MAC_CSR8_MAX_FRAME_UNIT,
866 rt2x00dev->rx->data_size);
867 rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
868
869 rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
870 rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
871 rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0xff);
872 rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
873
874 rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
875 rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON, 90);
876 rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
877
878 rt2500usb_register_read(rt2x00dev, PHY_CSR4, &reg);
879 rt2x00_set_field16(&reg, PHY_CSR4_LOW_RF_LE, 1);
880 rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
881
882 rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
883 rt2x00_set_field16(&reg, TXRX_CSR1_AUTO_SEQUENCE, 1);
884 rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
885
886 return 0;
887}
888
889static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
890{
891 unsigned int i;
892 u16 eeprom;
893 u8 value;
894 u8 reg_id;
895
896 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
897 rt2500usb_bbp_read(rt2x00dev, 0, &value);
898 if ((value != 0xff) && (value != 0x00))
899 goto continue_csr_init;
900 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
901 udelay(REGISTER_BUSY_DELAY);
902 }
903
904 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
905 return -EACCES;
906
907continue_csr_init:
908 rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
909 rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
910 rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
911 rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
912 rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
913 rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
914 rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
915 rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
916 rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
917 rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
918 rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
919 rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
920 rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
921 rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
922 rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
923 rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
924 rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
925 rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
926 rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
927 rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
928 rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
929 rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
930 rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
931 rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
932 rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
933 rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
934 rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
935 rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
936 rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
937 rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
938 rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
939
940 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
941 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
942 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
943
944 if (eeprom != 0xffff && eeprom != 0x0000) {
945 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
946 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
947 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
948 reg_id, value);
949 rt2500usb_bbp_write(rt2x00dev, reg_id, value);
950 }
951 }
952 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
953
954 return 0;
955}
956
957/*
958 * Device state switch handlers.
959 */
960static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
961 enum dev_state state)
962{
963 u16 reg;
964
965 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
966 rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
967 state == STATE_RADIO_RX_OFF);
968 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
969}
970
971static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
972{
973 /*
974 * Initialize all registers.
975 */
976 if (rt2500usb_init_registers(rt2x00dev) ||
977 rt2500usb_init_bbp(rt2x00dev)) {
978 ERROR(rt2x00dev, "Register initialization failed.\n");
979 return -EIO;
980 }
981
982 rt2x00usb_enable_radio(rt2x00dev);
983
984 /*
985 * Enable LED
986 */
987 rt2500usb_enable_led(rt2x00dev);
988
989 return 0;
990}
991
992static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
993{
994 /*
995 * Disable LED
996 */
997 rt2500usb_disable_led(rt2x00dev);
998
999 rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
1000 rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
1001
1002 /*
1003 * Disable synchronisation.
1004 */
1005 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1006
1007 rt2x00usb_disable_radio(rt2x00dev);
1008}
1009
1010static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
1011 enum dev_state state)
1012{
1013 u16 reg;
1014 u16 reg2;
1015 unsigned int i;
1016 char put_to_sleep;
1017 char bbp_state;
1018 char rf_state;
1019
1020 put_to_sleep = (state != STATE_AWAKE);
1021
1022 reg = 0;
1023 rt2x00_set_field16(&reg, MAC_CSR17_BBP_DESIRE_STATE, state);
1024 rt2x00_set_field16(&reg, MAC_CSR17_RF_DESIRE_STATE, state);
1025 rt2x00_set_field16(&reg, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
1026 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1027 rt2x00_set_field16(&reg, MAC_CSR17_SET_STATE, 1);
1028 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1029
1030 /*
1031 * Device is not guaranteed to be in the requested state yet.
1032 * We must wait until the register indicates that the
1033 * device has entered the correct state.
1034 */
1035 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1036 rt2500usb_register_read(rt2x00dev, MAC_CSR17, &reg2);
1037 bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
1038 rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
1039 if (bbp_state == state && rf_state == state)
1040 return 0;
1041 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1042 msleep(30);
1043 }
1044
1045 NOTICE(rt2x00dev, "Device failed to enter state %d, "
1046 "current device state: bbp %d and rf %d.\n",
1047 state, bbp_state, rf_state);
1048
1049 return -EBUSY;
1050}
1051
1052static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1053 enum dev_state state)
1054{
1055 int retval = 0;
1056
1057 switch (state) {
1058 case STATE_RADIO_ON:
1059 retval = rt2500usb_enable_radio(rt2x00dev);
1060 break;
1061 case STATE_RADIO_OFF:
1062 rt2500usb_disable_radio(rt2x00dev);
1063 break;
1064 case STATE_RADIO_RX_ON:
1065 case STATE_RADIO_RX_OFF:
1066 rt2500usb_toggle_rx(rt2x00dev, state);
1067 break;
1068 case STATE_DEEP_SLEEP:
1069 case STATE_SLEEP:
1070 case STATE_STANDBY:
1071 case STATE_AWAKE:
1072 retval = rt2500usb_set_state(rt2x00dev, state);
1073 break;
1074 default:
1075 retval = -ENOTSUPP;
1076 break;
1077 }
1078
1079 return retval;
1080}
1081
1082/*
1083 * TX descriptor initialization
1084 */
1085static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1086 struct data_desc *txd,
1087 struct data_entry_desc *desc,
1088 struct ieee80211_hdr *ieee80211hdr,
1089 unsigned int length,
1090 struct ieee80211_tx_control *control)
1091{
1092 u32 word;
1093
1094 /*
1095 * Start writing the descriptor words.
1096 */
1097 rt2x00_desc_read(txd, 1, &word);
1098 rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1099 rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs);
1100 rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
1101 rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
1102 rt2x00_desc_write(txd, 1, word);
1103
1104 rt2x00_desc_read(txd, 2, &word);
1105 rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
1106 rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
1107 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
1108 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
1109 rt2x00_desc_write(txd, 2, word);
1110
1111 rt2x00_desc_read(txd, 0, &word);
1112 rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit);
1113 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1114 test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1115 rt2x00_set_field32(&word, TXD_W0_ACK,
1116 !(control->flags & IEEE80211_TXCTL_NO_ACK));
1117 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1118 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1119 rt2x00_set_field32(&word, TXD_W0_OFDM,
1120 test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1121 rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
1122 !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT));
1123 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1124 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1125 rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
1126 rt2x00_desc_write(txd, 0, word);
1127}
1128
1129/*
1130 * TX data initialization
1131 */
1132static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1133 unsigned int queue)
1134{
1135 u16 reg;
1136
1137 if (queue != IEEE80211_TX_QUEUE_BEACON)
1138 return;
1139
1140 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1141 if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
1142 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
1143 /*
1144 * Beacon generation will fail initially.
1145 * To prevent this we need to register the TXRX_CSR19
1146 * register several times.
1147 */
1148 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1149 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1150 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1151 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1152 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1153 }
1154}
1155
1156/*
1157 * RX control handlers
1158 */
1159static int rt2500usb_fill_rxdone(struct data_entry *entry,
1160 int *signal, int *rssi, int *ofdm, int *size)
1161{
1162 struct urb *urb = entry->priv;
1163 struct data_desc *rxd = (struct data_desc *)(entry->skb->data +
1164 (urb->actual_length -
1165 entry->ring->desc_size));
1166 u32 word0;
1167 u32 word1;
1168
1169 rt2x00_desc_read(rxd, 0, &word0);
1170 rt2x00_desc_read(rxd, 1, &word1);
1171
1172 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
1173 rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) ||
1174 rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
1175 return -EINVAL;
1176
1177 /*
1178 * Obtain the status about this packet.
1179 */
1180 *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1181 *rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
1182 entry->ring->rt2x00dev->rssi_offset;
1183 *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1184 *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1185
1186 return 0;
1187}
1188
1189/*
1190 * Interrupt functions.
1191 */
1192static void rt2500usb_beacondone(struct urb *urb)
1193{
1194 struct data_entry *entry = (struct data_entry *)urb->context;
1195 struct data_ring *ring = entry->ring;
1196
1197 if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags))
1198 return;
1199
1200 /*
1201 * Check if this was the guardian beacon,
1202 * if that was the case we need to send the real beacon now.
1203 * Otherwise we should free the sk_buffer, the device
1204 * should be doing the rest of the work now.
1205 */
1206 if (ring->index == 1) {
1207 rt2x00_ring_index_done_inc(ring);
1208 entry = rt2x00_get_data_entry(ring);
1209 usb_submit_urb(entry->priv, GFP_ATOMIC);
1210 rt2x00_ring_index_inc(ring);
1211 } else if (ring->index_done == 1) {
1212 entry = rt2x00_get_data_entry_done(ring);
1213 if (entry->skb) {
1214 dev_kfree_skb(entry->skb);
1215 entry->skb = NULL;
1216 }
1217 rt2x00_ring_index_done_inc(ring);
1218 }
1219}
1220
1221/*
1222 * Device probe functions.
1223 */
1224static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1225{
1226 u16 word;
1227 u8 *mac;
1228
1229 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1230
1231 /*
1232 * Start validation of the data that has been read.
1233 */
1234 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1235 if (!is_valid_ether_addr(mac)) {
1236 random_ether_addr(mac);
1237 EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
1238 }
1239
1240 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1241 if (word == 0xffff) {
1242 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1243 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0);
1244 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0);
1245 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0);
1246 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1247 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1248 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1249 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1250 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1251 }
1252
1253 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1254 if (word == 0xffff) {
1255 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1256 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1257 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1258 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1259 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1260 }
1261
1262 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1263 if (word == 0xffff) {
1264 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1265 DEFAULT_RSSI_OFFSET);
1266 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1267 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1268 }
1269
1270 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
1271 if (word == 0xffff) {
1272 rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
1273 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
1274 EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
1275 }
1276
1277 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
1278 if (word == 0xffff) {
1279 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
1280 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1281 EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
1282 }
1283
1284 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
1285 if (word == 0xffff) {
1286 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
1287 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
1288 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
1289 EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
1290 }
1291
1292 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
1293 if (word == 0xffff) {
1294 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
1295 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
1296 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
1297 EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
1298 }
1299
1300 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
1301 if (word == 0xffff) {
1302 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
1303 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
1304 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
1305 EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
1306 }
1307
1308 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
1309 if (word == 0xffff) {
1310 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
1311 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
1312 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
1313 EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
1314 }
1315
1316 return 0;
1317}
1318
1319static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1320{
1321 u16 reg;
1322 u16 value;
1323 u16 eeprom;
1324
1325 /*
1326 * Read EEPROM word for configuration.
1327 */
1328 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1329
1330 /*
1331 * Identify RF chipset.
1332 */
1333 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1334 rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1335 rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
1336
1337 if (rt2x00_rev(&rt2x00dev->chip, 0xffff0)) {
1338 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1339 return -ENODEV;
1340 }
1341
1342 if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1343 !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1344 !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1345 !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1346 !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1347 !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1348 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1349 return -ENODEV;
1350 }
1351
1352 /*
1353 * Identify default antenna configuration.
1354 */
1355 rt2x00dev->hw->conf.antenna_sel_tx =
1356 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1357 rt2x00dev->hw->conf.antenna_sel_rx =
1358 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1359
1360 /*
1361 * Store led mode, for correct led behaviour.
1362 */
1363 rt2x00dev->led_mode =
1364 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1365
1366 /*
1367 * Check if the BBP tuning should be disabled.
1368 */
1369 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1370 if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1371 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1372
1373 /*
1374 * Read the RSSI <-> dBm offset information.
1375 */
1376 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1377 rt2x00dev->rssi_offset =
1378 rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1379
1380 return 0;
1381}
1382
1383/*
1384 * RF value list for RF2522
1385 * Supports: 2.4 GHz
1386 */
1387static const struct rf_channel rf_vals_bg_2522[] = {
1388 { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 },
1389 { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 },
1390 { 3, 0x00002050, 0x000c2002, 0x00000101, 0 },
1391 { 4, 0x00002050, 0x000c2016, 0x00000101, 0 },
1392 { 5, 0x00002050, 0x000c202a, 0x00000101, 0 },
1393 { 6, 0x00002050, 0x000c203e, 0x00000101, 0 },
1394 { 7, 0x00002050, 0x000c2052, 0x00000101, 0 },
1395 { 8, 0x00002050, 0x000c2066, 0x00000101, 0 },
1396 { 9, 0x00002050, 0x000c207a, 0x00000101, 0 },
1397 { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1398 { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1399 { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1400 { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1401 { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1402};
1403
1404/*
1405 * RF value list for RF2523
1406 * Supports: 2.4 GHz
1407 */
1408static const struct rf_channel rf_vals_bg_2523[] = {
1409 { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1410 { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1411 { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1412 { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1413 { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1414 { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1415 { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1416 { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1417 { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1418 { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1419 { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1420 { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1421 { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1422 { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1423};
1424
1425/*
1426 * RF value list for RF2524
1427 * Supports: 2.4 GHz
1428 */
1429static const struct rf_channel rf_vals_bg_2524[] = {
1430 { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1431 { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1432 { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1433 { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1434 { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1435 { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1436 { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1437 { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1438 { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1439 { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1440 { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1441 { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1442 { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1443 { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1444};
1445
1446/*
1447 * RF value list for RF2525
1448 * Supports: 2.4 GHz
1449 */
1450static const struct rf_channel rf_vals_bg_2525[] = {
1451 { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1452 { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1453 { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1454 { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1455 { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1456 { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1457 { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1458 { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1459 { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1460 { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1461 { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1462 { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1463 { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1464 { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1465};
1466
1467/*
1468 * RF value list for RF2525e
1469 * Supports: 2.4 GHz
1470 */
1471static const struct rf_channel rf_vals_bg_2525e[] = {
1472 { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
1473 { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
1474 { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
1475 { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
1476 { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
1477 { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
1478 { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
1479 { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
1480 { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
1481 { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
1482 { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
1483 { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
1484 { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
1485 { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
1486};
1487
1488/*
1489 * RF value list for RF5222
1490 * Supports: 2.4 GHz & 5.2 GHz
1491 */
1492static const struct rf_channel rf_vals_5222[] = {
1493 { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1494 { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1495 { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1496 { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1497 { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1498 { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1499 { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1500 { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1501 { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1502 { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1503 { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1504 { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1505 { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1506 { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1507
1508 /* 802.11 UNI / HyperLan 2 */
1509 { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1510 { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1511 { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1512 { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1513 { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1514 { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1515 { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1516 { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1517
1518 /* 802.11 HyperLan 2 */
1519 { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1520 { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1521 { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1522 { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1523 { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1524 { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1525 { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1526 { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1527 { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1528 { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1529
1530 /* 802.11 UNII */
1531 { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1532 { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1533 { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1534 { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1535 { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1536};
1537
1538static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1539{
1540 struct hw_mode_spec *spec = &rt2x00dev->spec;
1541 u8 *txpower;
1542 unsigned int i;
1543
1544 /*
1545 * Initialize all hw fields.
1546 */
1547 rt2x00dev->hw->flags =
1548 IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1549 IEEE80211_HW_RX_INCLUDES_FCS |
1550 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1551 IEEE80211_HW_MONITOR_DURING_OPER |
1552 IEEE80211_HW_NO_PROBE_FILTERING;
1553 rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1554 rt2x00dev->hw->max_signal = MAX_SIGNAL;
1555 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1556 rt2x00dev->hw->queues = 2;
1557
1558 SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1559 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1560 rt2x00_eeprom_addr(rt2x00dev,
1561 EEPROM_MAC_ADDR_0));
1562
1563 /*
1564 * Convert tx_power array in eeprom.
1565 */
1566 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1567 for (i = 0; i < 14; i++)
1568 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1569
1570 /*
1571 * Initialize hw_mode information.
1572 */
1573 spec->num_modes = 2;
1574 spec->num_rates = 12;
1575 spec->tx_power_a = NULL;
1576 spec->tx_power_bg = txpower;
1577 spec->tx_power_default = DEFAULT_TXPOWER;
1578
1579 if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1580 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1581 spec->channels = rf_vals_bg_2522;
1582 } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1583 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1584 spec->channels = rf_vals_bg_2523;
1585 } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1586 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1587 spec->channels = rf_vals_bg_2524;
1588 } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1589 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1590 spec->channels = rf_vals_bg_2525;
1591 } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1592 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1593 spec->channels = rf_vals_bg_2525e;
1594 } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1595 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1596 spec->channels = rf_vals_5222;
1597 spec->num_modes = 3;
1598 }
1599}
1600
1601static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1602{
1603 int retval;
1604
1605 /*
1606 * Allocate eeprom data.
1607 */
1608 retval = rt2500usb_validate_eeprom(rt2x00dev);
1609 if (retval)
1610 return retval;
1611
1612 retval = rt2500usb_init_eeprom(rt2x00dev);
1613 if (retval)
1614 return retval;
1615
1616 /*
1617 * Initialize hw specifications.
1618 */
1619 rt2500usb_probe_hw_mode(rt2x00dev);
1620
1621 /*
1622 * USB devices require scheduled packet filter toggling
1623 *This device requires the beacon ring
1624 */
1625 __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags);
1626 __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
1627
1628 /*
1629 * Set the rssi offset.
1630 */
1631 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1632
1633 return 0;
1634}
1635
1636/*
1637 * IEEE80211 stack callback functions.
1638 */
1639static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
1640 struct sk_buff *skb,
1641 struct ieee80211_tx_control *control)
1642{
1643 struct rt2x00_dev *rt2x00dev = hw->priv;
1644 struct usb_device *usb_dev =
1645 interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
1646 struct data_ring *ring =
1647 rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1648 struct data_entry *beacon;
1649 struct data_entry *guardian;
1650 int length;
1651
1652 /*
1653 * Just in case the ieee80211 doesn't set this,
1654 * but we need this queue set for the descriptor
1655 * initialization.
1656 */
1657 control->queue = IEEE80211_TX_QUEUE_BEACON;
1658
1659 /*
1660 * Obtain 2 entries, one for the guardian byte,
1661 * the second for the actual beacon.
1662 */
1663 guardian = rt2x00_get_data_entry(ring);
1664 rt2x00_ring_index_inc(ring);
1665 beacon = rt2x00_get_data_entry(ring);
1666
1667 /*
1668 * First we create the beacon.
1669 */
1670 skb_push(skb, ring->desc_size);
1671 rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
1672 (struct ieee80211_hdr *)(skb->data +
1673 ring->desc_size),
1674 skb->len - ring->desc_size, control);
1675
1676 /*
1677 * Length passed to usb_fill_urb cannot be an odd number,
1678 * so add 1 byte to make it even.
1679 */
1680 length = skb->len;
1681 if (length % 2)
1682 length++;
1683
1684 usb_fill_bulk_urb(beacon->priv, usb_dev,
1685 usb_sndbulkpipe(usb_dev, 1),
1686 skb->data, length, rt2500usb_beacondone, beacon);
1687
1688 beacon->skb = skb;
1689
1690 /*
1691 * Second we need to create the guardian byte.
1692 * We only need a single byte, so lets recycle
1693 * the 'flags' field we are not using for beacons.
1694 */
1695 guardian->flags = 0;
1696 usb_fill_bulk_urb(guardian->priv, usb_dev,
1697 usb_sndbulkpipe(usb_dev, 1),
1698 &guardian->flags, 1, rt2500usb_beacondone, guardian);
1699
1700 /*
1701 * Send out the guardian byte.
1702 */
1703 usb_submit_urb(guardian->priv, GFP_ATOMIC);
1704
1705 /*
1706 * Enable beacon generation.
1707 */
1708 rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1709
1710 return 0;
1711}
1712
1713static const struct ieee80211_ops rt2500usb_mac80211_ops = {
1714 .tx = rt2x00mac_tx,
1715 .add_interface = rt2x00mac_add_interface,
1716 .remove_interface = rt2x00mac_remove_interface,
1717 .config = rt2x00mac_config,
1718 .config_interface = rt2x00mac_config_interface,
1719 .set_multicast_list = rt2x00mac_set_multicast_list,
1720 .get_stats = rt2x00mac_get_stats,
1721 .conf_tx = rt2x00mac_conf_tx,
1722 .get_tx_stats = rt2x00mac_get_tx_stats,
1723 .beacon_update = rt2500usb_beacon_update,
1724};
1725
1726static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
1727 .probe_hw = rt2500usb_probe_hw,
1728 .initialize = rt2x00usb_initialize,
1729 .uninitialize = rt2x00usb_uninitialize,
1730 .set_device_state = rt2500usb_set_device_state,
1731 .link_stats = rt2500usb_link_stats,
1732 .reset_tuner = rt2500usb_reset_tuner,
1733 .link_tuner = rt2500usb_link_tuner,
1734 .write_tx_desc = rt2500usb_write_tx_desc,
1735 .write_tx_data = rt2x00usb_write_tx_data,
1736 .kick_tx_queue = rt2500usb_kick_tx_queue,
1737 .fill_rxdone = rt2500usb_fill_rxdone,
1738 .config_mac_addr = rt2500usb_config_mac_addr,
1739 .config_bssid = rt2500usb_config_bssid,
1740 .config_packet_filter = rt2500usb_config_packet_filter,
1741 .config_type = rt2500usb_config_type,
1742 .config = rt2500usb_config,
1743};
1744
1745static const struct rt2x00_ops rt2500usb_ops = {
1746 .name = DRV_NAME,
1747 .rxd_size = RXD_DESC_SIZE,
1748 .txd_size = TXD_DESC_SIZE,
1749 .eeprom_size = EEPROM_SIZE,
1750 .rf_size = RF_SIZE,
1751 .lib = &rt2500usb_rt2x00_ops,
1752 .hw = &rt2500usb_mac80211_ops,
1753#ifdef CONFIG_RT2X00_LIB_DEBUGFS
1754 .debugfs = &rt2500usb_rt2x00debug,
1755#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1756};
1757
1758/*
1759 * rt2500usb module information.
1760 */
1761static struct usb_device_id rt2500usb_device_table[] = {
1762 /* ASUS */
1763 { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1764 { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
1765 /* Belkin */
1766 { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
1767 { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
1768 { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
1769 /* Cisco Systems */
1770 { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
1771 { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
1772 { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
1773 /* Conceptronic */
1774 { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
1775 /* D-LINK */
1776 { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
1777 /* Gigabyte */
1778 { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
1779 { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
1780 /* Hercules */
1781 { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
1782 /* Melco */
1783 { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
1784 { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
1785 { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
1786 { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
1787
1788 /* MSI */
1789 { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
1790 { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
1791 { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
1792 /* Ralink */
1793 { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1794 { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
1795 { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
1796 { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1797 /* Siemens */
1798 { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
1799 /* SMC */
1800 { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
1801 /* Spairon */
1802 { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
1803 /* Trust */
1804 { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1805 /* Zinwell */
1806 { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
1807 { 0, }
1808};
1809
1810MODULE_AUTHOR(DRV_PROJECT);
1811MODULE_VERSION(DRV_VERSION);
1812MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
1813MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
1814MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
1815MODULE_LICENSE("GPL");
1816
1817static struct usb_driver rt2500usb_driver = {
1818 .name = DRV_NAME,
1819 .id_table = rt2500usb_device_table,
1820 .probe = rt2x00usb_probe,
1821 .disconnect = rt2x00usb_disconnect,
1822 .suspend = rt2x00usb_suspend,
1823 .resume = rt2x00usb_resume,
1824};
1825
1826static int __init rt2500usb_init(void)
1827{
1828 return usb_register(&rt2500usb_driver);
1829}
1830
1831static void __exit rt2500usb_exit(void)
1832{
1833 usb_deregister(&rt2500usb_driver);
1834}
1835
1836module_init(rt2500usb_init);
1837module_exit(rt2500usb_exit);