blob: 187e3d8bfdfe89512a454c128b0de4d8cb97a3b6 [file] [log] [blame]
Tony Lindgren1a8bfa12005-11-10 14:26:50 +00001/*
2 * linux/arch/arm/plat-omap/devices.c
3 *
4 * Common platform device setup/initialization for OMAP1 and OMAP2
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 */
11
Tony Lindgren1a8bfa12005-11-10 14:26:50 +000012#include <linux/module.h>
13#include <linux/kernel.h>
14#include <linux/init.h>
15#include <linux/platform_device.h>
16
Russell Kinga09e64f2008-08-05 16:14:15 +010017#include <mach/hardware.h>
Tony Lindgren1a8bfa12005-11-10 14:26:50 +000018#include <asm/io.h>
19#include <asm/mach-types.h>
20#include <asm/mach/map.h>
21
Russell Kinga09e64f2008-08-05 16:14:15 +010022#include <mach/tc.h>
23#include <mach/board.h>
24#include <mach/mux.h>
25#include <mach/gpio.h>
26#include <mach/menelaus.h>
27#include <mach/mcbsp.h>
Tony Lindgren1a8bfa12005-11-10 14:26:50 +000028
Tony Lindgrenc40fae92006-12-07 13:58:10 -080029#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
30
31#include "../plat-omap/dsp/dsp_common.h"
32
33static struct dsp_platform_data dsp_pdata = {
34 .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
35};
36
37static struct resource omap_dsp_resources[] = {
38 {
39 .name = "dsp_mmu",
40 .start = -1,
41 .flags = IORESOURCE_IRQ,
42 },
43};
44
45static struct platform_device omap_dsp_device = {
46 .name = "dsp",
47 .id = -1,
48 .num_resources = ARRAY_SIZE(omap_dsp_resources),
49 .resource = omap_dsp_resources,
50 .dev = {
51 .platform_data = &dsp_pdata,
52 },
53};
54
55static inline void omap_init_dsp(void)
56{
57 struct resource *res;
58 int irq;
59
60 if (cpu_is_omap15xx())
61 irq = INT_1510_DSP_MMU;
62 else if (cpu_is_omap16xx())
63 irq = INT_1610_DSP_MMU;
64 else if (cpu_is_omap24xx())
65 irq = INT_24XX_DSP_MMU;
66
67 res = platform_get_resource_byname(&omap_dsp_device,
68 IORESOURCE_IRQ, "dsp_mmu");
69 res->start = irq;
70
71 platform_device_register(&omap_dsp_device);
72}
73
74int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
75{
76 static DEFINE_MUTEX(dsp_pdata_lock);
77
78 mutex_init(&kdev->lock);
79
80 mutex_lock(&dsp_pdata_lock);
81 list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
82 mutex_unlock(&dsp_pdata_lock);
83
84 return 0;
85}
86EXPORT_SYMBOL(dsp_kfunc_device_register);
87
88#else
89static inline void omap_init_dsp(void) { }
90#endif /* CONFIG_OMAP_DSP */
91
92/*-------------------------------------------------------------------------*/
Tony Lindgren9b6553c2006-04-02 17:46:30 +010093#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
94
95static void omap_init_kp(void)
96{
97 if (machine_is_omap_h2() || machine_is_omap_h3()) {
98 omap_cfg_reg(F18_1610_KBC0);
99 omap_cfg_reg(D20_1610_KBC1);
100 omap_cfg_reg(D19_1610_KBC2);
101 omap_cfg_reg(E18_1610_KBC3);
102 omap_cfg_reg(C21_1610_KBC4);
103
104 omap_cfg_reg(G18_1610_KBR0);
105 omap_cfg_reg(F19_1610_KBR1);
106 omap_cfg_reg(H14_1610_KBR2);
107 omap_cfg_reg(E20_1610_KBR3);
108 omap_cfg_reg(E19_1610_KBR4);
109 omap_cfg_reg(N19_1610_KBR5);
Brian Swetland495f71d2006-06-26 16:16:03 -0700110 } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100111 omap_cfg_reg(E2_730_KBR0);
112 omap_cfg_reg(J7_730_KBR1);
113 omap_cfg_reg(E1_730_KBR2);
114 omap_cfg_reg(F3_730_KBR3);
115 omap_cfg_reg(D2_730_KBR4);
116
117 omap_cfg_reg(C2_730_KBC0);
118 omap_cfg_reg(D3_730_KBC1);
119 omap_cfg_reg(E4_730_KBC2);
120 omap_cfg_reg(F4_730_KBC3);
121 omap_cfg_reg(E3_730_KBC4);
122 } else if (machine_is_omap_h4()) {
123 omap_cfg_reg(T19_24XX_KBR0);
124 omap_cfg_reg(R19_24XX_KBR1);
125 omap_cfg_reg(V18_24XX_KBR2);
126 omap_cfg_reg(M21_24XX_KBR3);
127 omap_cfg_reg(E5__24XX_KBR4);
128 if (omap_has_menelaus()) {
129 omap_cfg_reg(B3__24XX_KBR5);
130 omap_cfg_reg(AA4_24XX_KBC2);
131 omap_cfg_reg(B13_24XX_KBC6);
132 } else {
133 omap_cfg_reg(M18_24XX_KBR5);
134 omap_cfg_reg(H19_24XX_KBC2);
135 omap_cfg_reg(N19_24XX_KBC6);
136 }
137 omap_cfg_reg(R20_24XX_KBC0);
138 omap_cfg_reg(M14_24XX_KBC1);
139 omap_cfg_reg(V17_24XX_KBC3);
140 omap_cfg_reg(P21_24XX_KBC4);
141 omap_cfg_reg(L14_24XX_KBC5);
142 }
143}
144#else
145static inline void omap_init_kp(void) {}
146#endif
147
148/*-------------------------------------------------------------------------*/
Eduardo Valentinbc5d0c82008-07-03 12:24:39 +0300149#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
150
151static struct platform_device **omap_mcbsp_devices;
152
153void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
154 int size)
155{
156 int i;
157
158 if (size > OMAP_MAX_MCBSP_COUNT) {
159 printk(KERN_WARNING "Registered too many McBSPs platform_data."
160 " Using maximum (%d) available.\n",
161 OMAP_MAX_MCBSP_COUNT);
162 size = OMAP_MAX_MCBSP_COUNT;
163 }
164
165 omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
166 GFP_KERNEL);
167 if (!omap_mcbsp_devices) {
168 printk(KERN_ERR "Could not register McBSP devices\n");
169 return;
170 }
171
172 for (i = 0; i < size; i++) {
173 struct platform_device *new_mcbsp;
174 int ret;
175
176 new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
177 if (!new_mcbsp)
178 continue;
179 new_mcbsp->dev.platform_data = &config[i];
180 ret = platform_device_add(new_mcbsp);
181 if (ret) {
182 platform_device_put(new_mcbsp);
183 continue;
184 }
185 omap_mcbsp_devices[i] = new_mcbsp;
186 }
187}
188
189#else
190void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
191 int size)
192{ }
193#endif
194
195/*-------------------------------------------------------------------------*/
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000196
197#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
198
199#ifdef CONFIG_ARCH_OMAP24XX
200#define OMAP_MMC1_BASE 0x4809c000
Kyungmin Parkabc45e12006-09-25 12:41:25 +0300201#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000202#else
203#define OMAP_MMC1_BASE 0xfffb7800
204#define OMAP_MMC1_INT INT_MMC
205#endif
206#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
207
208static struct omap_mmc_conf mmc1_conf;
209
210static u64 mmc1_dmamask = 0xffffffff;
211
212static struct resource mmc1_resources[] = {
213 {
Tony Lindgrence9c1a82006-07-01 19:56:44 +0100214 .start = OMAP_MMC1_BASE,
215 .end = OMAP_MMC1_BASE + 0x7f,
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000216 .flags = IORESOURCE_MEM,
217 },
218 {
219 .start = OMAP_MMC1_INT,
220 .flags = IORESOURCE_IRQ,
221 },
222};
223
224static struct platform_device mmc_omap_device1 = {
225 .name = "mmci-omap",
226 .id = 1,
227 .dev = {
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000228 .dma_mask = &mmc1_dmamask,
229 .platform_data = &mmc1_conf,
230 },
231 .num_resources = ARRAY_SIZE(mmc1_resources),
232 .resource = mmc1_resources,
233};
234
235#ifdef CONFIG_ARCH_OMAP16XX
236
237static struct omap_mmc_conf mmc2_conf;
238
239static u64 mmc2_dmamask = 0xffffffff;
240
241static struct resource mmc2_resources[] = {
242 {
Tony Lindgrence9c1a82006-07-01 19:56:44 +0100243 .start = OMAP_MMC2_BASE,
244 .end = OMAP_MMC2_BASE + 0x7f,
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000245 .flags = IORESOURCE_MEM,
246 },
247 {
248 .start = INT_1610_MMC2,
249 .flags = IORESOURCE_IRQ,
250 },
251};
252
253static struct platform_device mmc_omap_device2 = {
254 .name = "mmci-omap",
255 .id = 2,
256 .dev = {
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000257 .dma_mask = &mmc2_dmamask,
258 .platform_data = &mmc2_conf,
259 },
260 .num_resources = ARRAY_SIZE(mmc2_resources),
261 .resource = mmc2_resources,
262};
263#endif
264
265static void __init omap_init_mmc(void)
266{
267 const struct omap_mmc_config *mmc_conf;
268 const struct omap_mmc_conf *mmc;
269
270 /* NOTE: assumes MMC was never (wrongly) enabled */
271 mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
272 if (!mmc_conf)
273 return;
274
275 /* block 1 is always available and has just one pinout option */
276 mmc = &mmc_conf->mmc[0];
277 if (mmc->enabled) {
Kyungmin Parkabc45e12006-09-25 12:41:25 +0300278 if (cpu_is_omap24xx()) {
279 omap_cfg_reg(H18_24XX_MMC_CMD);
280 omap_cfg_reg(H15_24XX_MMC_CLKI);
281 omap_cfg_reg(G19_24XX_MMC_CLKO);
282 omap_cfg_reg(F20_24XX_MMC_DAT0);
283 omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
284 omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
285 } else {
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000286 omap_cfg_reg(MMC_CMD);
287 omap_cfg_reg(MMC_CLK);
288 omap_cfg_reg(MMC_DAT0);
289 if (cpu_is_omap1710()) {
290 omap_cfg_reg(M15_1710_MMC_CLKI);
291 omap_cfg_reg(P19_1710_MMC_CMDDIR);
292 omap_cfg_reg(P20_1710_MMC_DATDIR0);
293 }
294 }
295 if (mmc->wire4) {
Kyungmin Parkabc45e12006-09-25 12:41:25 +0300296 if (cpu_is_omap24xx()) {
297 omap_cfg_reg(H14_24XX_MMC_DAT1);
298 omap_cfg_reg(E19_24XX_MMC_DAT2);
299 omap_cfg_reg(D19_24XX_MMC_DAT3);
300 omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
301 omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
302 omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
303 } else {
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000304 omap_cfg_reg(MMC_DAT1);
305 /* NOTE: DAT2 can be on W10 (here) or M15 */
306 if (!mmc->nomux)
307 omap_cfg_reg(MMC_DAT2);
308 omap_cfg_reg(MMC_DAT3);
309 }
310 }
311 mmc1_conf = *mmc;
312 (void) platform_device_register(&mmc_omap_device1);
313 }
314
315#ifdef CONFIG_ARCH_OMAP16XX
316 /* block 2 is on newer chips, and has many pinout options */
317 mmc = &mmc_conf->mmc[1];
318 if (mmc->enabled) {
319 if (!mmc->nomux) {
320 omap_cfg_reg(Y8_1610_MMC2_CMD);
321 omap_cfg_reg(Y10_1610_MMC2_CLK);
322 omap_cfg_reg(R18_1610_MMC2_CLKIN);
323 omap_cfg_reg(W8_1610_MMC2_DAT0);
324 if (mmc->wire4) {
325 omap_cfg_reg(V8_1610_MMC2_DAT1);
326 omap_cfg_reg(W15_1610_MMC2_DAT2);
327 omap_cfg_reg(R10_1610_MMC2_DAT3);
328 }
329
330 /* These are needed for the level shifter */
331 omap_cfg_reg(V9_1610_MMC2_CMDDIR);
332 omap_cfg_reg(V5_1610_MMC2_DATDIR0);
333 omap_cfg_reg(W19_1610_MMC2_DATDIR1);
334 }
335
336 /* Feedback clock must be set on OMAP-1710 MMC2 */
337 if (cpu_is_omap1710())
338 omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
339 MOD_CONF_CTRL_1);
340 mmc2_conf = *mmc;
341 (void) platform_device_register(&mmc_omap_device2);
342 }
343#endif
344 return;
345}
346#else
347static inline void omap_init_mmc(void) {}
348#endif
349
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100350/*-------------------------------------------------------------------------*/
351
352/* Numbering for the SPI-capable controllers when used for SPI:
353 * spi = 1
354 * uwire = 2
355 * mmc1..2 = 3..4
356 * mcbsp1..3 = 5..7
357 */
358
359#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
360
361#define OMAP_UWIRE_BASE 0xfffb3000
362
363static struct resource uwire_resources[] = {
364 {
365 .start = OMAP_UWIRE_BASE,
366 .end = OMAP_UWIRE_BASE + 0x20,
367 .flags = IORESOURCE_MEM,
368 },
369};
370
371static struct platform_device omap_uwire_device = {
372 .name = "omap_uwire",
373 .id = -1,
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100374 .num_resources = ARRAY_SIZE(uwire_resources),
375 .resource = uwire_resources,
376};
377
378static void omap_init_uwire(void)
379{
380 /* FIXME define and use a boot tag; not all boards will be hooking
381 * up devices to the microwire controller, and multi-board configs
382 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
383 */
384
385 /* board-specific code must configure chipselects (only a few
386 * are normally used) and SCLK/SDI/SDO (each has two choices).
387 */
388 (void) platform_device_register(&omap_uwire_device);
389}
390#else
391static inline void omap_init_uwire(void) {}
392#endif
393
394/*-------------------------------------------------------------------------*/
395
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000396#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
397
398#ifdef CONFIG_ARCH_OMAP24XX
399#define OMAP_WDT_BASE 0x48022000
400#else
401#define OMAP_WDT_BASE 0xfffeb000
402#endif
403
404static struct resource wdt_resources[] = {
405 {
406 .start = OMAP_WDT_BASE,
407 .end = OMAP_WDT_BASE + 0x4f,
408 .flags = IORESOURCE_MEM,
409 },
410};
411
412static struct platform_device omap_wdt_device = {
413 .name = "omap_wdt",
414 .id = -1,
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000415 .num_resources = ARRAY_SIZE(wdt_resources),
416 .resource = wdt_resources,
417};
418
419static void omap_init_wdt(void)
420{
421 (void) platform_device_register(&omap_wdt_device);
422}
423#else
424static inline void omap_init_wdt(void) {}
425#endif
426
427/*-------------------------------------------------------------------------*/
428
Tony Lindgrenc40fae92006-12-07 13:58:10 -0800429#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000430
431#ifdef CONFIG_ARCH_OMAP24XX
432#define OMAP_RNG_BASE 0x480A0000
433#else
434#define OMAP_RNG_BASE 0xfffe5000
435#endif
436
437static struct resource rng_resources[] = {
438 {
439 .start = OMAP_RNG_BASE,
440 .end = OMAP_RNG_BASE + 0x4f,
441 .flags = IORESOURCE_MEM,
442 },
443};
444
445static struct platform_device omap_rng_device = {
446 .name = "omap_rng",
447 .id = -1,
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000448 .num_resources = ARRAY_SIZE(rng_resources),
449 .resource = rng_resources,
450};
451
452static void omap_init_rng(void)
453{
454 (void) platform_device_register(&omap_rng_device);
455}
456#else
457static inline void omap_init_rng(void) {}
458#endif
459
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000460/*
461 * This gets called after board-specific INIT_MACHINE, and initializes most
462 * on-chip peripherals accessible on this board (except for few like USB):
463 *
464 * (a) Does any "standard config" pin muxing needed. Board-specific
465 * code will have muxed GPIO pins and done "nonstandard" setup;
466 * that code could live in the boot loader.
467 * (b) Populating board-specific platform_data with the data drivers
468 * rely on to handle wiring variations.
469 * (c) Creating platform devices as meaningful on this board and
470 * with this kernel configuration.
471 *
472 * Claiming GPIOs, and setting their direction and initial values, is the
473 * responsibility of the device drivers. So is responding to probe().
474 *
475 * Board-specific knowlege like creating devices or pin setup is to be
476 * kept out of drivers as much as possible. In particular, pin setup
477 * may be handled by the boot loader, and drivers should expect it will
478 * normally have been done by the time they're probed.
479 */
480static int __init omap_init_devices(void)
481{
Syed Mohammed Khasim56a25642006-12-06 17:14:08 -0800482/*
483 * Need to enable relevant once for 2430 SDP
484 */
485#ifndef CONFIG_MACH_OMAP_2430SDP
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000486 /* please keep these calls, and their implementations above,
487 * in alphabetical order so they're easier to sort through.
488 */
Tony Lindgrenc40fae92006-12-07 13:58:10 -0800489 omap_init_dsp();
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100490 omap_init_kp();
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000491 omap_init_mmc();
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100492 omap_init_uwire();
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000493 omap_init_wdt();
494 omap_init_rng();
Syed Mohammed Khasim56a25642006-12-06 17:14:08 -0800495#endif
Tony Lindgren1a8bfa12005-11-10 14:26:50 +0000496 return 0;
497}
498arch_initcall(omap_init_devices);