blob: d4a2b17b24985fe350352e389ccb42a836dcd2ad [file] [log] [blame]
Ben Dooksb4975492008-07-03 12:32:51 +01001/* linux/drivers/serial/s3c2440.c
2 *
3 * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
4 *
5 * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
6 * http://armlinux.simtec.co.uk/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#include <linux/module.h>
14#include <linux/ioport.h>
15#include <linux/io.h>
16#include <linux/platform_device.h>
17#include <linux/init.h>
18#include <linux/serial_core.h>
19#include <linux/serial.h>
20
21#include <asm/irq.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010022#include <mach/hardware.h>
Ben Dooksb4975492008-07-03 12:32:51 +010023
24#include <asm/plat-s3c/regs-serial.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010025#include <mach/regs-gpio.h>
Ben Dooksb4975492008-07-03 12:32:51 +010026
27#include "samsung.h"
28
29
30static int s3c2440_serial_setsource(struct uart_port *port,
31 struct s3c24xx_uart_clksrc *clk)
32{
33 unsigned long ucon = rd_regl(port, S3C2410_UCON);
34
35 /* todo - proper fclk<>nonfclk switch. */
36
37 ucon &= ~S3C2440_UCON_CLKMASK;
38
39 if (strcmp(clk->name, "uclk") == 0)
40 ucon |= S3C2440_UCON_UCLK;
41 else if (strcmp(clk->name, "pclk") == 0)
42 ucon |= S3C2440_UCON_PCLK;
43 else if (strcmp(clk->name, "fclk") == 0)
44 ucon |= S3C2440_UCON_FCLK;
45 else {
46 printk(KERN_ERR "unknown clock source %s\n", clk->name);
47 return -EINVAL;
48 }
49
50 wr_regl(port, S3C2410_UCON, ucon);
51 return 0;
52}
53
54
55static int s3c2440_serial_getsource(struct uart_port *port,
56 struct s3c24xx_uart_clksrc *clk)
57{
58 unsigned long ucon = rd_regl(port, S3C2410_UCON);
59 unsigned long ucon0, ucon1, ucon2;
60
61 switch (ucon & S3C2440_UCON_CLKMASK) {
62 case S3C2440_UCON_UCLK:
63 clk->divisor = 1;
64 clk->name = "uclk";
65 break;
66
67 case S3C2440_UCON_PCLK:
68 case S3C2440_UCON_PCLK2:
69 clk->divisor = 1;
70 clk->name = "pclk";
71 break;
72
73 case S3C2440_UCON_FCLK:
74 /* the fun of calculating the uart divisors on
75 * the s3c2440 */
76
77 ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
78 ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
79 ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
80
81 printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
82
83 ucon0 &= S3C2440_UCON0_DIVMASK;
84 ucon1 &= S3C2440_UCON1_DIVMASK;
85 ucon2 &= S3C2440_UCON2_DIVMASK;
86
87 if (ucon0 != 0) {
88 clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
89 clk->divisor += 6;
90 } else if (ucon1 != 0) {
91 clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
92 clk->divisor += 21;
93 } else if (ucon2 != 0) {
94 clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
95 clk->divisor += 36;
96 } else {
97 /* manual calims 44, seems to be 9 */
98 clk->divisor = 9;
99 }
100
101 clk->name = "fclk";
102 break;
103 }
104
105 return 0;
106}
107
108static int s3c2440_serial_resetport(struct uart_port *port,
109 struct s3c2410_uartcfg *cfg)
110{
111 unsigned long ucon = rd_regl(port, S3C2410_UCON);
112
113 dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
114 port, port->mapbase, cfg);
115
116 /* ensure we don't change the clock settings... */
117
118 ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
119
120 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
121 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
122
123 /* reset both fifos */
124
125 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
126 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
127
128 return 0;
129}
130
131static struct s3c24xx_uart_info s3c2440_uart_inf = {
132 .name = "Samsung S3C2440 UART",
133 .type = PORT_S3C2440,
134 .fifosize = 64,
135 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
136 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
137 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
138 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
139 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
140 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
141 .get_clksrc = s3c2440_serial_getsource,
142 .set_clksrc = s3c2440_serial_setsource,
143 .reset_port = s3c2440_serial_resetport,
144};
145
146/* device management */
147
148static int s3c2440_serial_probe(struct platform_device *dev)
149{
150 dbg("s3c2440_serial_probe: dev=%p\n", dev);
151 return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
152}
153
154static struct platform_driver s3c2440_serial_drv = {
155 .probe = s3c2440_serial_probe,
156 .remove = s3c24xx_serial_remove,
157 .driver = {
158 .name = "s3c2440-uart",
159 .owner = THIS_MODULE,
160 },
161};
162
163s3c24xx_console_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
164
165static int __init s3c2440_serial_init(void)
166{
167 return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
168}
169
170static void __exit s3c2440_serial_exit(void)
171{
172 platform_driver_unregister(&s3c2440_serial_drv);
173}
174
175module_init(s3c2440_serial_init);
176module_exit(s3c2440_serial_exit);
177
178MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
179MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
180MODULE_LICENSE("GPLi v2");
181MODULE_ALIAS("platform:s3c2440-uart");