blob: b9923b1434a2f82a698c5011fbe55191bddf8965 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001menu "Code maturity level options"
2
3config EXPERIMENTAL
4 bool "Prompt for development and/or incomplete code/drivers"
5 ---help---
6 Some of the various things that Linux supports (such as network
7 drivers, file systems, network protocols, etc.) can be in a state
8 of development where the functionality, stability, or the level of
9 testing is not yet high enough for general use. This is usually
10 known as the "alpha-test" phase among developers. If a feature is
11 currently in alpha-test, then the developers usually discourage
12 uninformed widespread use of this feature by the general public to
13 avoid "Why doesn't this work?" type mail messages. However, active
14 testing and use of these systems is welcomed. Just be aware that it
15 may not meet the normal level of reliability or it may fail to work
16 in some special cases. Detailed bug reports from people familiar
17 with the kernel internals are usually welcomed by the developers
18 (before submitting bug reports, please read the documents
19 <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
20 <file:Documentation/BUG-HUNTING>, and
21 <file:Documentation/oops-tracing.txt> in the kernel source).
22
23 This option will also make obsoleted drivers available. These are
24 drivers that have been replaced by something else, and/or are
25 scheduled to be removed in a future kernel release.
26
27 Unless you intend to help test and develop a feature or driver that
28 falls into this category, or you have a situation that requires
29 using these features, you should probably say N here, which will
30 cause the configurator to present you with fewer choices. If
31 you say Y here, you will be offered the choice of using features or
32 drivers that are currently considered to be in the alpha-test phase.
33
34config CLEAN_COMPILE
35 bool "Select only drivers expected to compile cleanly" if EXPERIMENTAL
36 default y
37 help
38 Select this option if you don't even want to see the option
39 to configure known-broken drivers.
40
41 If unsure, say Y
42
43config BROKEN
44 bool
45 depends on !CLEAN_COMPILE
46 default y
47
48config BROKEN_ON_SMP
49 bool
50 depends on BROKEN || !SMP
51 default y
52
53config LOCK_KERNEL
54 bool
55 depends on SMP || PREEMPT
56 default y
57
58config INIT_ENV_ARG_LIMIT
59 int
60 default 32 if !USERMODE
61 default 128 if USERMODE
62 help
Randy Dunlap34ad92c2005-10-30 15:01:46 -080063 Maximum of each of the number of arguments and environment
64 variables passed to init from the kernel command line.
Linus Torvalds1da177e2005-04-16 15:20:36 -070065
66endmenu
67
68menu "General setup"
69
70config LOCALVERSION
71 string "Local version - append to kernel release"
72 help
73 Append an extra string to the end of your kernel version.
74 This will show up when you type uname, for example.
75 The string you set here will be appended after the contents of
76 any files with a filename matching localversion* in your
77 object and source tree, in that order. Your total string can
78 be a maximum of 64 characters.
79
Ryan Andersonaaebf432005-07-31 04:57:49 -040080config LOCALVERSION_AUTO
81 bool "Automatically append version information to the version string"
82 default y
83 help
84 This will try to automatically determine if the current tree is a
85 release tree by looking for git tags that
86 belong to the current top of tree revision.
87
88 A string of the format -gxxxxxxxx will be added to the localversion
89 if a git based tree is found. The string generated by this will be
90 appended after any matching localversion* files, and after the value
91 set in CONFIG_LOCALVERSION
92
93 Note: This requires Perl, and a git repository, but not necessarily
94 the git or cogito tools to be installed.
95
Linus Torvalds1da177e2005-04-16 15:20:36 -070096config SWAP
97 bool "Support for paging of anonymous memory (swap)"
98 depends on MMU
99 default y
100 help
101 This option allows you to choose whether you want to have support
Jesper Juhl92c35042006-01-15 02:40:08 +0100102 for so called swap devices or swap files in your kernel that are
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103 used to provide more virtual memory than the actual RAM present
104 in your computer. If unsure say Y.
105
106config SYSVIPC
107 bool "System V IPC"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108 ---help---
109 Inter Process Communication is a suite of library functions and
110 system calls which let processes (running programs) synchronize and
111 exchange information. It is generally considered to be a good thing,
112 and some programs won't run unless you say Y here. In particular, if
113 you want to run the DOS emulator dosemu under Linux (read the
114 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
115 you'll need to say Y here.
116
117 You can find documentation about IPC with "info ipc" and also in
118 section 6.4 of the Linux Programmer's Guide, available from
119 <http://www.tldp.org/guides.html>.
120
121config POSIX_MQUEUE
122 bool "POSIX Message Queues"
123 depends on NET && EXPERIMENTAL
124 ---help---
125 POSIX variant of message queues is a part of IPC. In POSIX message
126 queues every message has a priority which decides about succession
127 of receiving it by a process. If you want to compile and run
128 programs written e.g. for Solaris with use of its POSIX message
129 queues (functions mq_*) say Y here. To use this feature you will
130 also need mqueue library, available from
131 <http://www.mat.uni.torun.pl/~wrona/posix_ipc/>
132
133 POSIX message queues are visible as a filesystem called 'mqueue'
134 and can be mounted somewhere if you want to do filesystem
135 operations on message queues.
136
137 If unsure, say Y.
138
139config BSD_PROCESS_ACCT
140 bool "BSD Process Accounting"
141 help
142 If you say Y here, a user level program will be able to instruct the
143 kernel (via a special system call) to write process accounting
144 information to a file: whenever a process exits, information about
145 that process will be appended to the file by the kernel. The
146 information includes things such as creation time, owning user,
147 command name, memory usage, controlling terminal etc. (the complete
148 list is in the struct acct in <file:include/linux/acct.h>). It is
149 up to the user level program to do useful things with this
150 information. This is generally a good idea, so say Y.
151
152config BSD_PROCESS_ACCT_V3
153 bool "BSD Process Accounting version 3 file format"
154 depends on BSD_PROCESS_ACCT
155 default n
156 help
157 If you say Y here, the process accounting information is written
158 in a new file format that also logs the process IDs of each
159 process and it's parent. Note that this file format is incompatible
160 with previous v0/v1/v2 file formats, so you will need updated tools
161 for processing it. A preliminary version of these tools is available
162 at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
163
164config SYSCTL
165 bool "Sysctl support"
166 ---help---
167 The sysctl interface provides a means of dynamically changing
168 certain kernel parameters and variables on the fly without requiring
169 a recompile of the kernel or reboot of the system. The primary
170 interface consists of a system call, but if you say Y to "/proc
171 file system support", a tree of modifiable sysctl entries will be
172 generated beneath the /proc/sys directory. They are explained in the
173 files in <file:Documentation/sysctl/>. Note that enabling this
174 option will enlarge the kernel by at least 8 KB.
175
176 As it is generally a good thing, you should say Y here unless
177 building a kernel for install/rescue disks or your system is very
178 limited in memory.
179
180config AUDIT
181 bool "Auditing support"
Chris Wright804a6a42005-05-11 10:52:45 +0100182 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700183 default y if SECURITY_SELINUX
184 help
185 Enable auditing infrastructure that can be used with another
186 kernel subsystem, such as SELinux (which requires this for
187 logging of avc messages output). Does not do system-call
188 auditing without CONFIG_AUDITSYSCALL.
189
190config AUDITSYSCALL
191 bool "Enable system-call auditing support"
Martin Schwidefsky347a8dc2006-01-06 00:19:28 -0800192 depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193 default y if SECURITY_SELINUX
194 help
195 Enable low-overhead system-call auditing infrastructure that
196 can be used independently or with another kernel subsystem,
197 such as SELinux.
198
Linus Torvalds1da177e2005-04-16 15:20:36 -0700199config IKCONFIG
200 bool "Kernel .config support"
201 ---help---
202 This option enables the complete Linux kernel ".config" file
203 contents to be saved in the kernel. It provides documentation
204 of which kernel options are used in a running kernel or in an
205 on-disk kernel. This information can be extracted from the kernel
206 image file with the script scripts/extract-ikconfig and used as
207 input to rebuild the current kernel or to build another kernel.
208 It can also be extracted from a running kernel by reading
209 /proc/config.gz if enabled (below).
210
211config IKCONFIG_PROC
212 bool "Enable access to .config through /proc/config.gz"
213 depends on IKCONFIG && PROC_FS
214 ---help---
215 This option enables access to the kernel configuration file
216 through /proc/config.gz.
217
218config CPUSETS
219 bool "Cpuset support"
220 depends on SMP
221 help
Randy Dunlapd9fd8a62005-07-27 11:45:11 -0700222 This option will let you create and manage CPUSETs which
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223 allow dynamically partitioning a system into sets of CPUs and
224 Memory Nodes and assigning tasks to run only within those sets.
225 This is primarily useful on large SMP or NUMA systems.
226
227 Say N if unsure.
228
Sam Ravnborgdbec4862005-08-10 20:44:50 +0200229source "usr/Kconfig"
230
Matt Mackalle585e472006-01-08 01:05:24 -0800231config UID16
232 bool "Enable 16-bit UID system calls" if EMBEDDED
Adrian Bunk2308acc2006-01-09 20:51:26 -0800233 depends on ARM || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
Matt Mackalle585e472006-01-08 01:05:24 -0800234 default y
235 help
236 This enables the legacy 16-bit UID syscall wrappers.
237
Matt Mackall64ca9002006-01-08 01:05:26 -0800238config VM86
239 depends X86
240 default y
241 bool "Enable VM86 support" if EMBEDDED
242 help
243 This option is required by programs like DOSEMU to run 16-bit legacy
244 code on X86 processors. It also may be needed by software like
245 XFree86 to initialize some video cards via BIOS. Disabling this
246 option saves about 6k.
247
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800248config CC_OPTIMIZE_FOR_SIZE
249 bool "Optimize for size (Look out for broken compilers!)"
250 default y
251 depends on ARM || H8300 || EXPERIMENTAL
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800252 help
253 Enabling this option will pass "-Os" instead of "-O2" to gcc
254 resulting in a smaller kernel.
255
256 WARNING: some versions of gcc may generate incorrect code with this
257 option. If problems are observed, a gcc upgrade may be needed.
258
259 If unsure, say N.
260
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261menuconfig EMBEDDED
262 bool "Configure standard kernel features (for small systems)"
263 help
264 This option allows certain base kernel options and settings
265 to be disabled or tweaked. This is for specialized
266 environments which can tolerate a "non-standard" kernel.
267 Only use this if you really know what you are doing.
268
269config KALLSYMS
270 bool "Load all symbols for debugging/kksymoops" if EMBEDDED
271 default y
272 help
273 Say Y here to let the kernel print out symbolic crash information and
274 symbolic stack backtraces. This increases the size of the kernel
275 somewhat, as all symbols have to be loaded into the kernel image.
276
277config KALLSYMS_ALL
278 bool "Include all symbols in kallsyms"
279 depends on DEBUG_KERNEL && KALLSYMS
280 help
281 Normally kallsyms only contains the symbols of functions, for nicer
282 OOPS messages. Some debuggers can use kallsyms for other
Jesper Juhlf9f97bc2005-07-20 05:43:05 +0200283 symbols too: say Y here to include all symbols, if you need them
284 and you don't care about adding 300k to the size of your kernel.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700285
286 Say N.
287
288config KALLSYMS_EXTRA_PASS
289 bool "Do an extra kallsyms pass"
290 depends on KALLSYMS
291 help
292 If kallsyms is not working correctly, the build will fail with
293 inconsistent kallsyms data. If that occurs, log a bug report and
294 turn on KALLSYMS_EXTRA_PASS which should result in a stable build.
295 Always say N here unless you find a bug in kallsyms, which must be
296 reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while
297 you wait for kallsyms to be fixed.
298
Matt Mackalld59745c2005-05-01 08:59:02 -0700299
Greg Kroah-Hartman712f47c2005-11-16 11:27:07 -0800300config HOTPLUG
301 bool "Support for hot-pluggable devices" if EMBEDDED
302 default y
303 help
304 This option is provided for the case where no hotplug or uevent
305 capabilities is wanted by the kernel. You should only consider
306 disabling this option for embedded systems that do not use modules, a
307 dynamic /dev tree, or dynamic device discovery. Just say Y.
308
Matt Mackalld59745c2005-05-01 08:59:02 -0700309config PRINTK
310 default y
311 bool "Enable support for printk" if EMBEDDED
312 help
313 This option enables normal printk support. Removing it
314 eliminates most of the message strings from the kernel image
315 and makes the kernel more or less silent. As this makes it
316 very difficult to diagnose system problems, saying N here is
317 strongly discouraged.
318
Matt Mackallc8538a72005-05-01 08:59:01 -0700319config BUG
320 bool "BUG() support" if EMBEDDED
321 default y
322 help
323 Disabling this option eliminates support for BUG and WARN, reducing
324 the size of your kernel image and potentially quietly ignoring
325 numerous fatal conditions. You should only consider disabling this
326 option for embedded systems with no facilities for reporting errors.
327 Just say Y.
328
Matt Mackall708e9a72006-01-08 01:05:25 -0800329config ELF_CORE
330 default y
331 bool "Enable ELF core dumps" if EMBEDDED
332 help
333 Enable support for generating core dumps. Disabling saves about 4k.
334
Linus Torvalds1da177e2005-04-16 15:20:36 -0700335config BASE_FULL
336 default y
337 bool "Enable full-sized data structures for core" if EMBEDDED
338 help
339 Disabling this option reduces the size of miscellaneous core
340 kernel data structures. This saves memory on small machines,
341 but may reduce performance.
342
343config FUTEX
344 bool "Enable futex support" if EMBEDDED
345 default y
346 help
347 Disabling this option will cause the kernel to be built without
348 support for "fast userspace mutexes". The resulting kernel may not
349 run glibc-based applications correctly.
350
351config EPOLL
352 bool "Enable eventpoll support" if EMBEDDED
353 default y
354 help
355 Disabling this option will cause the kernel to be built without
356 support for epoll family of system calls.
357
Linus Torvalds1da177e2005-04-16 15:20:36 -0700358config SHMEM
359 bool "Use full shmem filesystem" if EMBEDDED
360 default y
361 depends on MMU
362 help
363 The shmem is an internal filesystem used to manage shared memory.
364 It is backed by swap and manages resource limits. It is also exported
365 to userspace as tmpfs if TMPFS is enabled. Disabling this
366 option replaces shmem and tmpfs with the much simpler ramfs code,
367 which may be appropriate on small systems without swap.
368
369config CC_ALIGN_FUNCTIONS
370 int "Function alignment" if EMBEDDED
371 default 0
372 help
373 Align the start of functions to the next power-of-two greater than n,
374 skipping up to n bytes. For instance, 32 aligns functions
375 to the next 32-byte boundary, but 24 would align to the next
376 32-byte boundary only if this can be done by skipping 23 bytes or less.
377 Zero means use compiler's default.
378
379config CC_ALIGN_LABELS
380 int "Label alignment" if EMBEDDED
381 default 0
382 help
383 Align all branch targets to a power-of-two boundary, skipping
384 up to n bytes like ALIGN_FUNCTIONS. This option can easily
385 make code slower, because it must insert dummy operations for
386 when the branch target is reached in the usual flow of the code.
387 Zero means use compiler's default.
388
389config CC_ALIGN_LOOPS
390 int "Loop alignment" if EMBEDDED
391 default 0
392 help
393 Align loops to a power-of-two boundary, skipping up to n bytes.
394 Zero means use compiler's default.
395
396config CC_ALIGN_JUMPS
397 int "Jump alignment" if EMBEDDED
398 default 0
399 help
400 Align branch targets to a power-of-two boundary, for branch
401 targets where the targets can only be reached by jumping,
402 skipping up to n bytes like ALIGN_FUNCTIONS. In this case,
403 no dummy operations need be executed.
404 Zero means use compiler's default.
405
Matt Mackall10cef602006-01-08 01:01:45 -0800406config SLAB
407 default y
408 bool "Use full SLAB allocator" if EMBEDDED
409 help
410 Disabling this replaces the advanced SLAB allocator and
411 kmalloc support with the drastically simpler SLOB allocator.
412 SLOB is more space efficient but does not scale well and is
413 more susceptible to fragmentation.
414
Linus Torvalds1da177e2005-04-16 15:20:36 -0700415endmenu # General setup
416
417config TINY_SHMEM
418 default !SHMEM
419 bool
420
421config BASE_SMALL
422 int
423 default 0 if BASE_FULL
424 default 1 if !BASE_FULL
425
Matt Mackall10cef602006-01-08 01:01:45 -0800426config SLOB
427 default !SLAB
428 bool
429
Adrian Bunkfd279192006-01-16 22:13:59 -0800430config OBSOLETE_INTERMODULE
431 tristate
432
Linus Torvalds1da177e2005-04-16 15:20:36 -0700433menu "Loadable module support"
434
435config MODULES
436 bool "Enable loadable module support"
437 help
438 Kernel modules are small pieces of compiled code which can
439 be inserted in the running kernel, rather than being
440 permanently built into the kernel. You use the "modprobe"
441 tool to add (and sometimes remove) them. If you say Y here,
442 many parts of the kernel can be built as modules (by
443 answering M instead of Y where indicated): this is most
444 useful for infrequently used options which are not required
445 for booting. For more information, see the man pages for
446 modprobe, lsmod, modinfo, insmod and rmmod.
447
448 If you say Y here, you will need to run "make
449 modules_install" to put the modules under /lib/modules/
450 where modprobe can find them (you may need to be root to do
451 this).
452
453 If unsure, say Y.
454
455config MODULE_UNLOAD
456 bool "Module unloading"
457 depends on MODULES
458 help
459 Without this option you will not be able to unload any
460 modules (note that some modules may not be unloadable
461 anyway), which makes your kernel slightly smaller and
462 simpler. If unsure, say Y.
463
464config MODULE_FORCE_UNLOAD
465 bool "Forced module unloading"
466 depends on MODULE_UNLOAD && EXPERIMENTAL
467 help
468 This option allows you to force a module to unload, even if the
469 kernel believes it is unsafe: the kernel will remove the module
470 without waiting for anyone to stop using it (using the -f option to
471 rmmod). This is mainly for kernel developers and desperate users.
472 If unsure, say N.
473
474config OBSOLETE_MODPARM
475 bool
476 default y
477 depends on MODULES
478 help
479 You need this option to use module parameters on modules which
480 have not been converted to the new module parameter system yet.
481 If unsure, say Y.
482
483config MODVERSIONS
Sam Ravnborg0d541642005-12-26 23:04:02 +0100484 bool "Module versioning support"
485 depends on MODULES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700486 help
487 Usually, you have to use modules compiled with your kernel.
488 Saying Y here makes it sometimes possible to use modules
489 compiled for different kernels, by adding enough information
490 to the modules to (hopefully) spot any changes which would
491 make them incompatible with the kernel you are running. If
492 unsure, say N.
493
494config MODULE_SRCVERSION_ALL
495 bool "Source checksum for all modules"
496 depends on MODULES
497 help
498 Modules which contain a MODULE_VERSION get an extra "srcversion"
499 field inserted into their modinfo section, which contains a
500 sum of the source files which made it. This helps maintainers
501 see exactly which source was used to build a module (since
502 others sometimes change the module source without updating
503 the version). With this option, such a "srcversion" field
504 will be created for all modules. If unsure, say N.
505
506config KMOD
507 bool "Automatic kernel module loading"
508 depends on MODULES
509 help
510 Normally when you have selected some parts of the kernel to
511 be created as kernel modules, you must load them (using the
512 "modprobe" command) before you can use them. If you say Y
513 here, some parts of the kernel will be able to load modules
514 automatically: when a part of the kernel needs a module, it
515 runs modprobe with the appropriate arguments, thereby
516 loading the module if it is available. If unsure, say Y.
517
518config STOP_MACHINE
519 bool
520 default y
521 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
522 help
523 Need stop_machine() primitive.
524endmenu
Jens Axboe3a65dfe2005-11-04 08:43:35 +0100525
526menu "Block layer"
527source "block/Kconfig"
528endmenu