Blame - arch/arm/mach-msm/Kconfig - kernel/msm

blob: c9d0000f208c4d3493f4fa4d21821e39addac3d7 [file] [log] [blame]

Brian Swetland	1637de0	2008-09-09 07:13:33 -0700	[diff] [blame]	1	if ARCH_MSM
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	2
Stepan Moskovchenko	1cd286f	2011-08-03 19:03:02 -0700	[diff] [blame]	3	menu "MSM SoC Type"
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	4
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	5	config ARCH_MSM7X01A
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	6	bool "MSM7x00A / MSM7x01A"
				7	select ARCH_MSM_ARM11
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	8	select MSM_VIC
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	9	select CPU_V6
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	10	select MSM_REMOTE_SPINLOCK_SWP
				11
				12	config ARCH_MSM7X25
				13	bool "MSM7x25"
				14	select ARCH_MSM_ARM11
				15	select MSM_VIC
				16	select CPU_V6
				17	select MSM_REMOTE_SPINLOCK_SWP
Taniya Das	be561a0	2011-10-12 09:53:11 +0530	[diff] [blame]	18	select MULTI_IRQ_HANDLER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	19
				20	config ARCH_MSM7X27
				21	bool "MSM7x27"
				22	select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
				23	select ARCH_HAS_BARRIERS if MSM_SOC_REV_NONE
				24	select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
				25	select MSM_VIC
				26	select CPU_V6 if MSM_SOC_REV_NONE
				27	select CPU_V7 if MSM_SOC_REV_A
				28	select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
				29	select MSM_GPIOMUX
				30	select REGULATOR
Taniya Das	be561a0	2011-10-12 09:53:11 +0530	[diff] [blame]	31	select MULTI_IRQ_HANDLER
Pankaj Kumar	75c86fd	2011-10-01 18:51:09 +0530	[diff] [blame]	32	select MSM_PROC_COMM_REGULATOR
Laura Abbott	1fbd2e6	2011-12-18 10:26:46 -0800	[diff] [blame]	33	select CLEANCACHE
				34	select QCACHE
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	35	select MSM_PM2 if PM
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	36	select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A
Taniya Das	d4c39f9	2012-05-14 17:41:49 +0530	[diff] [blame]	37	select DONT_MAP_HOLE_AFTER_MEMBANK0
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	38
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	39	config ARCH_MSM7X30
				40	bool "MSM7x30"
				41	select ARCH_MSM_SCORPION
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	42	select MSM_VIC
				43	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	44	select MSM_REMOTE_SPINLOCK_DEKKERS
				45	select ARCH_SPARSEMEM_ENABLE
Laura Abbott	78593b5	2011-09-26 18:48:14 -0700	[diff] [blame]	46	select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	47	select MEMORY_HOTPLUG
				48	select MEMORY_HOTREMOVE
Bryan Huntsman	ea43964	2011-11-23 12:34:05 -0800	[diff] [blame]	49	select ARCH_ENABLE_MEMORY_HOTPLUG
				50	select ARCH_ENABLE_MEMORY_HOTREMOVE
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	51	select MIGRATION
				52	select ARCH_MEMORY_PROBE
				53	select ARCH_MEMORY_REMOVE
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	54	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	55	select RESERVE_FIRST_PAGE
				56	select MSM_DALRPC
				57	select MSM_SPM_V1
				58	select REGULATOR
Justin Paupore	637a25d	2011-07-14 17:11:04 -0700	[diff] [blame]	59	select MSM_PROC_COMM_REGULATOR
Taniya Das	bae99fb	2011-10-12 09:55:13 +0530	[diff] [blame]	60	select MULTI_IRQ_HANDLER
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	61	select MSM_PM2 if PM
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	62
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	63	config ARCH_QSD8X50
				64	bool "QSD8X50"
				65	select ARCH_MSM_SCORPION
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	66	select MSM_VIC
				67	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	68	select MSM_REMOTE_SPINLOCK_LDREX
				69	select CPU_USE_DOMAINS
				70	select EMULATE_DOMAIN_MANAGER_V7
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	71	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	72	select MSM_DALRPC
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	73	select MSM_PM2 if PM
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	74
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	75	config ARCH_MSM8X60
				76	bool "MSM8X60"
Jeff Ohlstein	e14411d	2010-11-30 13:06:36 -0800	[diff] [blame]	77	select ARCH_MSM_SCORPIONMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	78	select SMP_PARALLEL_START if SMP
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	79	select ARM_GIC
				80	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	81	select MSM_REMOTE_SPINLOCK_LDREX
				82	select ARCH_REQUIRE_GPIOLIB
				83	select MSM_ADM3
				84	select REGULATOR
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	85	select MSM_RPM_REGULATOR
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	86	select MSM_V2_TLMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	87	select MSM_PIL
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	88	select ARCH_HAS_CPU_IDLE_WAIT
				89	select MSM_DIRECT_SCLK_ACCESS
				90	select MSM_RPM
				91	select MSM_XO
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	92	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	93	select MSM_BUS_SCALING
				94	select MSM_SECURE_IO
				95	select MSM_DALRPC
				96	select MSM_QDSP6_APR
				97	select MSM_NATIVE_RESTART
				98	select ARCH_INLINE_SPIN_TRYLOCK
				99	select ARCH_INLINE_SPIN_TRYLOCK_BH
				100	select ARCH_INLINE_SPIN_LOCK
				101	select ARCH_INLINE_SPIN_LOCK_BH
				102	select ARCH_INLINE_SPIN_LOCK_IRQ
				103	select ARCH_INLINE_SPIN_LOCK_IRQSAVE
				104	select ARCH_INLINE_SPIN_UNLOCK
				105	select ARCH_INLINE_SPIN_UNLOCK_BH
				106	select ARCH_INLINE_SPIN_UNLOCK_IRQ
				107	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
				108	select ARCH_INLINE_READ_TRYLOCK
				109	select ARCH_INLINE_READ_LOCK
				110	select ARCH_INLINE_READ_LOCK_BH
				111	select ARCH_INLINE_READ_LOCK_IRQ
				112	select ARCH_INLINE_READ_LOCK_IRQSAVE
				113	select ARCH_INLINE_READ_UNLOCK
				114	select ARCH_INLINE_READ_UNLOCK_BH
				115	select ARCH_INLINE_READ_UNLOCK_IRQ
				116	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
				117	select ARCH_INLINE_WRITE_TRYLOCK
				118	select ARCH_INLINE_WRITE_LOCK
				119	select ARCH_INLINE_WRITE_LOCK_BH
				120	select ARCH_INLINE_WRITE_LOCK_IRQ
				121	select ARCH_INLINE_WRITE_LOCK_IRQSAVE
				122	select ARCH_INLINE_WRITE_UNLOCK
				123	select ARCH_INLINE_WRITE_UNLOCK_BH
				124	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
				125	select CPU_HAS_L2_PMU
				126	select MSM_SPM_V1
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	127	select MSM_SCM if SMP
				128	select MULTI_IRQ_HANDLER
Laura Abbott	46505f6	2011-11-02 18:06:55 -0700	[diff] [blame]	129	select MSM_MULTIMEDIA_USE_ION
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	130	select MSM_PM8X60 if PM
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	131	select MSM_RUN_QUEUE_STATS
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	132
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	133	config ARCH_MSM8960
				134	bool "MSM8960"
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	135	select ARCH_MSM_KRAITMP
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	136	select ARM_GIC
				137	select CPU_V7
				138	select MSM_V2_TLMM
				139	select MSM_GPIOMUX
				140	select MSM_SCM if SMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	141	select MSM_DIRECT_SCLK_ACCESS
				142	select REGULATOR
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	143	select MSM_RPM_REGULATOR
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	144	select MSM_RPM
				145	select MSM_XO
				146	select MSM_QDSP6_APR
				147	select MSM_PIL
				148	select MSM_AUDIO_QDSP6 if SND_SOC
				149	select CPU_HAS_L2_PMU
				150	select MSM_SPM_V2
				151	select MSM_L2_SPM
				152	select MSM_NATIVE_RESTART
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	153	select DONT_MAP_HOLE_AFTER_MEMBANK0
				154	select MSM_REMOTE_SPINLOCK_SFPB
				155	select ARCH_POPULATES_NODE_MAP
				156	select ARCH_SPARSEMEM_ENABLE
				157	select ARCH_HAS_HOLES_MEMORYMODEL
Larry Bassel	b8d6102	2012-02-24 10:49:45 -0800	[diff] [blame]	158	select ENABLE_DMM
				159	select MEMORY_HOTPLUG if ENABLE_DMM
				160	select MEMORY_HOTREMOVE if ENABLE_DMM
				161	select ARCH_ENABLE_MEMORY_HOTPLUG if ENABLE_DMM
				162	select ARCH_ENABLE_MEMORY_HOTREMOVE if ENABLE_DMM
				163	select MIGRATION if ENABLE_DMM
				164	select ARCH_MEMORY_PROBE if ENABLE_DMM
				165	select ARCH_MEMORY_REMOVE if ENABLE_DMM
				166	select FIX_MOVABLE_ZONE if ENABLE_DMM
Larry Bassel	d4d82c9	2011-12-07 09:52:49 -0800	[diff] [blame]	167	select CLEANCACHE
				168	select QCACHE
Laura Abbott	6d61a91	2011-10-27 16:44:14 -0700	[diff] [blame]	169	select MSM_MULTIMEDIA_USE_ION
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	170	select MULTI_IRQ_HANDLER
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	171	select MSM_PM8X60 if PM
Laura Abbott	085dd20	2012-03-30 14:02:34 -0700	[diff] [blame]	172	select HOLES_IN_ZONE if SPARSEMEM
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	173	select MSM_RUN_QUEUE_STATS
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	174
				175	config ARCH_MSM8930
				176	bool "MSM8930"
				177	select ARCH_MSM_KRAITMP
				178	select ARM_GIC
				179	select CPU_V7
				180	select MSM_V2_TLMM
				181	select MSM_GPIOMUX
				182	select MSM_SCM if SMP
				183	select MSM_DIRECT_SCLK_ACCESS
				184	select REGULATOR
David Collins	5779cea	2012-01-05 15:09:21 -0800	[diff] [blame]	185	select MSM_RPM_REGULATOR
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	186	select MSM_RPM
				187	select MSM_XO
				188	select MSM_QDSP6_APR
				189	select MSM_PIL
				190	select MSM_AUDIO_QDSP6 if SND_SOC
				191	select CPU_HAS_L2_PMU
				192	select MSM_SPM_V2
				193	select MSM_L2_SPM
				194	select MSM_NATIVE_RESTART
				195	select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmberg	eab1073	2011-09-23 19:44:43 -0600	[diff] [blame]	196	select MSM_REMOTE_SPINLOCK_SFPB
Larry Bassel	f74479e	2011-09-08 11:07:52 -0700	[diff] [blame]	197	select ARCH_POPULATES_NODE_MAP
				198	select ARCH_SPARSEMEM_ENABLE
				199	select ARCH_HAS_HOLES_MEMORYMODEL
Larry Bassel	b8d6102	2012-02-24 10:49:45 -0800	[diff] [blame]	200	select ENABLE_DMM
				201	select MEMORY_HOTPLUG if ENABLE_DMM
				202	select MEMORY_HOTREMOVE if ENABLE_DMM
				203	select ARCH_ENABLE_MEMORY_HOTPLUG if ENABLE_DMM
				204	select ARCH_ENABLE_MEMORY_HOTREMOVE if ENABLE_DMM
				205	select MIGRATION if ENABLE_DMM
				206	select ARCH_MEMORY_PROBE if ENABLE_DMM
				207	select ARCH_MEMORY_REMOVE if ENABLE_DMM
				208	select FIX_MOVABLE_ZONE if ENABLE_DMM
Baruch Eruchimovitch	e9cbfc1	2011-10-09 19:47:08 +0200	[diff] [blame]	209	select MSM_ULTRASOUND
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	210	select MULTI_IRQ_HANDLER
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	211	select MSM_PM8X60 if PM
Laura Abbott	085dd20	2012-03-30 14:02:34 -0700	[diff] [blame]	212	select HOLES_IN_ZONE if SPARSEMEM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	213
				214	config ARCH_APQ8064
				215	bool "APQ8064"
				216	select ARCH_MSM_KRAITMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	217	select MSM_V2_TLMM
				218	select ARM_GIC
				219	select CPU_V7
				220	select MSM_SCM if SMP
Joel King	4ebccc6	2011-07-22 09:43:22 -0700	[diff] [blame]	221	select MSM_GPIOMUX
Eric Holmberg	40d2188	2011-09-27 09:42:03 -0600	[diff] [blame]	222	select MSM_REMOTE_SPINLOCK_SFPB
Swaminathan Sathappan	47e5d93	2011-12-05 14:48:07 -0800	[diff] [blame]	223	select MSM_PIL
Swaminathan Sathappan	2f51a75	2011-12-05 12:51:19 -0800	[diff] [blame]	224	select MSM_QDSP6_APR
				225	select MSM_AUDIO_QDSP6 if SND_SOC
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	226	select MULTI_IRQ_HANDLER
Praveen Chidambaram	7849901	2011-11-01 17:15:17 -0600	[diff] [blame]	227	select MSM_RPM
				228	select MSM_SPM_V2
				229	select MSM_L2_SPM
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	230	select MSM_PM8X60 if PM
Neil Leeder	814d3d3	2012-01-19 17:21:43 -0500	[diff] [blame]	231	select CPU_HAS_L2_PMU
Laura Abbott	085dd20	2012-03-30 14:02:34 -0700	[diff] [blame]	232	select HOLES_IN_ZONE if SPARSEMEM
Larry Bassel	67b921d	2012-04-06 10:23:27 -0700	[diff] [blame]	233	select ENABLE_DMM
				234	select MEMORY_HOTPLUG if ENABLE_DMM
				235	select MEMORY_HOTREMOVE if ENABLE_DMM
				236	select ARCH_ENABLE_MEMORY_HOTPLUG if ENABLE_DMM
				237	select ARCH_ENABLE_MEMORY_HOTREMOVE if ENABLE_DMM
				238	select MIGRATION if ENABLE_DMM
				239	select ARCH_MEMORY_PROBE if ENABLE_DMM
				240	select ARCH_MEMORY_REMOVE if ENABLE_DMM
				241	select FIX_MOVABLE_ZONE if ENABLE_DMM
				242	select CLEANCACHE
				243	select QCACHE
Niranjana Vishwanathapura	f1427ac	2012-05-03 14:28:21 -0600	[diff] [blame]	244	select MIGHT_HAVE_PCI
				245	select ARCH_SUPPORTS_MSI
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	246
Sathish Ambley	d4efc76	2011-10-09 22:19:22 -0700	[diff] [blame]	247	config ARCH_MSMCOPPER
				248	bool "MSM Copper"
				249	select ARCH_MSM_KRAITMP
				250	select MSM_V2_TLMM
				251	select ARM_GIC
				252	select CPU_V7
				253	select MSM_SCM if SMP
				254	select MSM_GPIOMUX
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	255	select MULTI_IRQ_HANDLER
Olav Haugan	b800c8c	2012-01-30 08:50:45 -0800	[diff] [blame]	256	select MSM_MULTIMEDIA_USE_ION
Matt Wagantall	c2bbdc3	2012-03-21 19:44:50 -0700	[diff] [blame]	257	select MSM_PIL
Praveen Chidambaram	aa9d52b	2012-04-02 11:09:47 -0600	[diff] [blame]	258	select MSM_SPM_V2
				259	select MSM_L2_SPM
Praveen Chidambaram	85b7b28	2012-04-16 13:45:15 -0600	[diff] [blame]	260	select MSM_RPM
				261	select MSM_PM8X60 if PM
Sathish Ambley	d4efc76	2011-10-09 22:19:22 -0700	[diff] [blame]	262
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	263	config ARCH_FSM9XXX
				264	bool "FSM9XXX"
				265	select ARCH_MSM_SCORPION
				266	select MSM_VIC
				267	select CPU_V7
				268	select MSM_REMOTE_SPINLOCK_LDREX
				269	select FSM9XXX_TLMM
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	270	select MULTI_IRQ_HANDLER
Bryan Huntsman	18b3c0c	2011-11-23 15:12:58 -0800	[diff] [blame]	271	select MSM_DALRPC
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	272
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	273	config ARCH_MSM9615
				274	bool "MSM9615"
				275	select ARM_GIC
Taniya Das	b241bd8	2012-03-19 17:58:06 +0530	[diff] [blame]	276	select GIC_SECURE
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	277	select ARCH_MSM_CORTEX_A5
				278	select CPU_V7
				279	select MSM_V2_TLMM
				280	select MSM_GPIOMUX
Praveen Chidambaram	ab3b1c4	2011-08-25 08:44:05 -0600	[diff] [blame]	281	select MSM_RPM
Maheshkumar Sivasubramanian	738b458	2011-09-06 17:26:24 -0600	[diff] [blame]	282	select MSM_SPM_V2
Rohit Vaswani	f688fa6	2011-10-13 18:13:10 -0700	[diff] [blame]	283	select MSM_NATIVE_RESTART
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	284	select REGULATOR
				285	select MSM_RPM_REGULATOR
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	286	select MULTI_IRQ_HANDLER
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	287	select MSM_PM8X60 if PM
Vikram Mulukutla	2021c00	2011-12-16 12:32:59 -0800	[diff] [blame]	288	select MSM_XO
Olav Haugan	e6a0acd	2012-04-05 09:29:12 -0700	[diff] [blame]	289	select MSM_MULTIMEDIA_USE_ION
Shiv Maliyappanahalli	9ec55e9	2012-01-09 14:44:59 -0800	[diff] [blame]	290	select MSM_QDSP6_APR
				291	select MSM_AUDIO_QDSP6 if SND_SOC
Rohit Vaswani	ead426f	2012-01-05 20:24:52 -0800	[diff] [blame]	292	select FIQ
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	293
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	294	config ARCH_MSM8625
				295	bool "MSM8625"
				296	select ARCH_MSM_CORTEX_A5
				297	select CPU_V7
				298	select MSM_GPIOMUX
				299	select ARM_GIC
				300	select ARCH_MSM_CORTEXMP
				301	select MULTI_IRQ_HANDLER
Trilok Soni	3a45399	2012-03-06 18:46:22 +0530	[diff] [blame]	302	select ARM_TICKET_LOCKS
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	303	select MSM_RUN_QUEUE_STATS
Rohit Vaswani	fafe249	2012-04-23 18:54:12 -0700	[diff] [blame]	304
				305	config ARCH_MSM9625
				306	bool "MSM9625"
				307	select ARM_GIC
				308	select GIC_SECURE
				309	select ARCH_MSM_CORTEX_A5
				310	select SMP
				311	select MSM_SMP
				312	select CPU_V7
				313	select MULTI_IRQ_HANDLER
				314	select MSM_V2_TLMM
				315
Stepan Moskovchenko	1cd286f	2011-08-03 19:03:02 -0700	[diff] [blame]	316	endmenu
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	317
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	318	choice
				319	prompt "MSM SoC Revision"
				320	default MSM_SOC_REV_NONE
				321	config MSM_SOC_REV_NONE
				322	bool "N/A"
				323	select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
				324	select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	325	config MSM_SOC_REV_A
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	326	bool "Rev. A"
				327	select ARCH_MSM7X27A if ARCH_MSM7X27
				328	endchoice
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	329
Stepan Moskovchenko	00da074	2011-07-08 14:06:44 -0700	[diff] [blame]	330	config MSM_KRAIT_TBB_ABORT_HANDLER
				331	bool "Krait TBB/TBH data abort handler"
				332	depends on ARCH_MSM_KRAIT
				333	depends on ARM_THUMB
				334	help
				335	Certain early samples of the Krait processor may generate data
				336	aborts for TBB / TBH instructions that fail their condition code
				337	checks. Enabling this option will ignore these erroneous data aborts,
				338	at the expense of a very small performance penalty.
				339
				340	If unsure, say N.
				341
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	342	config ARCH_MSM_ARM11
				343	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	344
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	345	config ARCH_MSM_SCORPION
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	346	bool
				347
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	348	config ARCH_MSM_KRAIT
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	349	bool
Stephen Boyd	51cabbe	2011-12-02 13:28:56 -0800	[diff] [blame]	350	select ARM_L1_CACHE_SHIFT_6
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	351
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	352	config MSM_SMP
				353	bool
				354
				355	config ARCH_MSM_SCORPIONMP
				356	select ARCH_MSM_SCORPION
				357	select MSM_SMP
Taniya Das	c43e687	2012-03-21 16:41:14 +0530	[diff] [blame]	358	select HAVE_ARCH_HAS_CURRENT_TIMER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	359	bool
				360
				361	config ARCH_MSM_KRAITMP
				362	select ARCH_MSM_KRAIT
				363	select MSM_SMP
Taniya Das	c43e687	2012-03-21 16:41:14 +0530	[diff] [blame]	364	select HAVE_ARCH_HAS_CURRENT_TIMER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	365	bool
				366
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	367	config ARCH_MSM_CORTEXMP
				368	select MSM_SMP
				369	bool
				370
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	371	config ARCH_MSM_CORTEX_A5
Bryan Huntsman	239ef1e	2011-11-23 15:09:13 -0800	[diff] [blame]	372	bool
Rohit Vaswani	af7ae27	2012-01-09 10:28:57 -0800	[diff] [blame]	373	select HAVE_HW_BRKPT_RESERVED_RW_ACCESS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	374
				375	config ARCH_MSM7X27A
				376	bool
				377	select MSM_DALRPC
Justin Paupore	b3a33b7	2011-08-23 15:30:32 -0700	[diff] [blame]	378	select MSM_PROC_COMM_REGULATOR
Taniya Das	86e0e13	2011-10-19 11:32:00 +0530	[diff] [blame]	379	select MULTI_IRQ_HANDLER
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	380	select ARM_GIC
				381	select ARCH_MSM_CORTEXMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	382
Gregory Bean	f9f3d31	2010-04-30 22:06:50 -0700	[diff] [blame]	383	config MSM_VIC
				384	bool
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	385
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	386	config MSM_RPM
				387	bool "Resource Power Manager"
				388	select MSM_MPM
				389
				390	config MSM_MPM
				391	bool "Modem Power Manager"
				392
				393	config MSM_XO
				394	bool
				395
				396	config MSM_REMOTE_SPINLOCK_DEKKERS
				397	bool
				398	config MSM_REMOTE_SPINLOCK_SWP
				399	bool
				400	config MSM_REMOTE_SPINLOCK_LDREX
				401	bool
Eric Holmberg	eab1073	2011-09-23 19:44:43 -0600	[diff] [blame]	402	config MSM_REMOTE_SPINLOCK_SFPB
				403	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	404	config MSM_ADM3
				405	bool
				406
				407	menu "MSM Board Selection"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	408
				409	config MACH_HALIBUT
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	410	depends on ARCH_MSM7X01A
				411	depends on MSM_STACKED_MEMORY
				412	default y
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	413	bool "Halibut Board (QCT SURF7201A)"
				414	help
				415	Support for the Qualcomm SURF7201A eval board.
				416
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	417	config MACH_MSM7201A_SURF
				418	depends on ARCH_MSM7X01A
				419	depends on MSM_STACKED_MEMORY
				420	default y
				421	bool "MSM7201A SURF"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	422	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	423	Support for the Qualcomm MSM7201A SURF eval board.
				424
				425	config MACH_MSM7201A_FFA
				426	depends on ARCH_MSM7X01A
				427	depends on MSM_STACKED_MEMORY
				428	default y
				429	bool "MSM7201A FFA"
				430	help
				431	Support for the Qualcomm MSM7201A FFA eval board.
				432
				433	config MACH_TROUT
				434	depends on ARCH_MSM7X01A
				435	depends on MSM_STACKED_MEMORY
				436	default y
				437	bool "Trout"
				438
				439	config MACH_MSM7X27_SURF
				440	depends on ARCH_MSM7X27
				441	depends on !MSM_STACKED_MEMORY
				442	default y
				443	bool "MSM7x27 SURF"
				444	help
				445	Support for the Qualcomm MSM7x27 SURF eval board.
				446
				447	config MACH_MSM7X27_FFA
				448	depends on ARCH_MSM7X27
				449	depends on !MSM_STACKED_MEMORY
				450	default y
				451	bool "MSM7x27 FFA"
				452	help
				453	Support for the Qualcomm MSM7x27 FFA eval board.
				454
				455	config MACH_MSM7X27A_RUMI3
				456	depends on ARCH_MSM7X27A
				457	depends on !MSM_STACKED_MEMORY
				458	default y
				459	bool "MSM7x27A RUMI3"
				460	help
				461	Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
				462
				463	config MACH_MSM7X27A_SURF
				464	depends on ARCH_MSM7X27A
				465	depends on !MSM_STACKED_MEMORY
				466	default y
				467	bool "MSM7x27A SURF"
				468	help
				469	Support for the Qualcomm MSM7x27A SURF.
				470
				471	config MACH_MSM7X27A_FFA
				472	depends on ARCH_MSM7X27A
				473	depends on !MSM_STACKED_MEMORY
				474	default y
				475	bool "MSM7x27A FFA"
				476	help
				477	Support for the Qualcomm MSM7x27A FFA.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	478
Trilok Soni	3d0f6c5	2011-07-26 16:06:58 +0530	[diff] [blame]	479	config MACH_MSM7625A_SURF
				480	depends on ARCH_MSM7X27A
				481	depends on !MSM_STACKED_MEMORY
				482	default y
				483	bool "MSM7625A SURF"
				484	help
				485	Support for the Qualcomm MSM7625A SURF.
				486
				487	config MACH_MSM7625A_FFA
				488	depends on ARCH_MSM7X27A
				489	depends on !MSM_STACKED_MEMORY
				490	default y
				491	bool "MSM7625A FFA"
				492	help
				493	Support for the Qualcomm MSM7625A FFA.
				494
Taniya Das	c98bfbc	2011-08-23 09:58:55 +0530	[diff] [blame]	495	config MACH_MSM7627A_QRD1
				496	depends on ARCH_MSM7X27A
				497	depends on !MSM_STACKED_MEMORY
				498	default y
				499	bool "MSM7627A QRD1"
				500	help
Chintan Pandya	b1bad0e	2012-02-06 19:04:51 +0530	[diff] [blame]	501	Support for the Qualcomm MSM7627A Reference Design.
				502
				503	config MACH_MSM7627A_QRD3
				504	depends on ARCH_MSM7X27A
				505	depends on !MSM_STACKED_MEMORY
				506	default y
				507	bool "MSM7627A QRD3"
				508	help
				509	Support for the Qualcomm MSM7627A Reference Design.
Taniya Das	c98bfbc	2011-08-23 09:58:55 +0530	[diff] [blame]	510
Taniya Das	c868a2e	2012-01-03 10:18:47 +0530	[diff] [blame]	511	config MACH_MSM7627A_EVB
				512	depends on ARCH_MSM7X27A
				513	depends on !MSM_STACKED_MEMORY
				514	default y
				515	bool "MSM7627A EVB"
				516	help
				517	Support for the Qualcomm MSM7627A Reference Design.
				518
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	519	config MACH_MSM8625_RUMI3
				520	depends on ARCH_MSM8625
				521	depends on !MSM_STACKED_MEMORY
				522	default y
				523	bool "MSM8625 RUMI3"
				524	help
				525	Support for the Qualcomm MSM8625 RUMI3 Emulation Platform.
				526
Taniya Das	e3027e2	2012-02-27 16:32:27 +0530	[diff] [blame]	527	config MACH_MSM8625_SURF
				528	depends on ARCH_MSM8625
				529	depends on !MSM_STACKED_MEMORY
				530	default y
				531	bool "MSM8625 SURF"
				532	help
				533	Support for the Qualcomm MSM8625 SURF.
				534
Aparna Mallavarapu	9f000a7	2012-04-20 15:37:57 +0530	[diff] [blame]	535	config MACH_MSM8625_FFA
				536	depends on ARCH_MSM8625
				537	depends on !MSM_STACKED_MEMORY
				538	default y
				539	bool "MSM8625 FFA"
				540	help
				541	Support for the Qualcomm MSM8625 FFA.
				542
Chintan Pandya	f4ad400	2012-02-28 19:49:03 +0530	[diff] [blame]	543	config MACH_MSM8625_EVB
				544	depends on ARCH_MSM8625
				545	depends on !MSM_STACKED_MEMORY
				546	default y
				547	bool "MSM8625 EVB"
				548	help
				549	Support for the Qualcomm MSM8625 Reference Design.
				550
Taniya Das	bd09654	2012-03-15 17:43:45 +0530	[diff] [blame]	551	config MACH_MSM8625_QRD7
				552	depends on ARCH_MSM8625
				553	depends on !MSM_STACKED_MEMORY
				554	default y
				555	bool "MSM8625 QRD7"
				556	help
				557	Support for the Qualcomm MSM8625 Reference Design.
				558
Aparna Mallavarapu	5a32624	2012-05-09 19:49:02 +0530	[diff] [blame]	559	config MACH_MSM8625_EVT
				560	depends on ARCH_MSM8625
				561	depends on !MSM_STACKED_MEMORY
				562	default y
				563	bool "MSM8625 EVT"
				564	help
				565	Support for the Qualcomm MSM8625 Reference Design.
				566
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	567	config MACH_MSM7X30_SURF
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	568	depends on ARCH_MSM7X30
				569	depends on !MSM_STACKED_MEMORY
				570	default y
				571	bool "MSM7x30 SURF"
				572	help
				573	Support for the Qualcomm MSM7x30 SURF eval board.
				574
				575	config MACH_MSM7X30_FFA
				576	depends on ARCH_MSM7X30
				577	depends on !MSM_STACKED_MEMORY
				578	default y
				579	bool "MSM7x30 FFA"
				580	help
				581	Support for the Qualcomm MSM7x30 FFA eval board.
				582
				583	config MACH_MSM7X30_FLUID
				584	depends on ARCH_MSM7X30
				585	depends on !MSM_STACKED_MEMORY
				586	default y
				587	bool "MSM7x30 FLUID"
				588	help
				589	Support for the Qualcomm MSM7x30 FLUID eval board.
				590
				591	config MACH_SAPPHIRE
				592	depends on ARCH_MSM7X01A
				593	default n
				594	bool "Sapphire"
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	595
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	596	config MACH_QSD8X50_SURF
				597	depends on ARCH_QSD8X50
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	598	depends on MSM_SOC_REV_NONE
				599	depends on MSM_STACKED_MEMORY
				600	default y
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	601	bool "QSD8x50 SURF"
				602	help
				603	Support for the Qualcomm QSD8x50 SURF eval board.
				604
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	605	config MACH_QSD8X50_FFA
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	606	depends on ARCH_QSD8X50
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	607	depends on MSM_SOC_REV_NONE
				608	depends on MSM_STACKED_MEMORY
				609	default y
				610	bool "QSD8x50 FFA"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	611	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	612	Support for the Qualcomm QSD8x50 FFA eval board.
				613
				614	config MACH_MSM7X25_SURF
				615	depends on ARCH_MSM7X25
				616	depends on !MSM_STACKED_MEMORY
				617	default y
				618	bool "MSM7x25 SURF"
				619	help
				620	Support for the Qualcomm MSM7x25 SURF eval board.
				621
				622	config MACH_MSM7X25_FFA
				623	depends on ARCH_MSM7X25
				624	depends on !MSM_STACKED_MEMORY
				625	default y
				626	bool "MSM7x25 FFA"
				627	help
				628	Support for the Qualcomm MSM7x25 FFA eval board.
				629
				630	config MACH_MSM8X55_SURF
				631	depends on ARCH_MSM7X30
				632	depends on !MSM_STACKED_MEMORY
				633	default y
				634	bool "MSM8X55 SURF"
				635	help
				636	Support for the Qualcomm MSM8x55 SURF eval board.
				637
				638	config MACH_MSM8X55_FFA
				639	depends on ARCH_MSM7X30
				640	depends on !MSM_STACKED_MEMORY
				641	default y
				642	bool "MSM8X55 FFA"
				643	help
				644	Support for the Qualcomm MSM8x55 FFA eval board.
				645
				646	config MACH_MSM8X55_SVLTE_FFA
				647	depends on ARCH_MSM7X30
				648	depends on !MSM_STACKED_MEMORY
				649	default y
				650	bool "MSM8X55 SVLTE FFA"
				651	help
				652	Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
				653
				654	config MACH_MSM8X55_SVLTE_SURF
				655	depends on ARCH_MSM7X30
				656	depends on !MSM_STACKED_MEMORY
				657	default y
				658	bool "MSM8X55 SVLTE SURF"
				659	help
				660	Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	661
Steve Muckle	a55df6e	2010-01-07 12:43:24 -0800	[diff] [blame]	662	config MACH_MSM8X60_RUMI3
				663	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	664	default n
Steve Muckle	a55df6e	2010-01-07 12:43:24 -0800	[diff] [blame]	665	bool "MSM8x60 RUMI3"
				666	help
				667	Support for the Qualcomm MSM8x60 RUMI3 emulator.
				668
Steve Muckle	57bbf1c	2010-01-07 12:51:10 -0800	[diff] [blame]	669	config MACH_MSM8X60_SIM
				670	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	671	default n
Steve Muckle	57bbf1c	2010-01-07 12:51:10 -0800	[diff] [blame]	672	bool "MSM8x60 Simulator"
				673	help
				674	Support for the Qualcomm MSM8x60 simulator.
				675
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	676	config MACH_MSM8X60_SURF
				677	depends on ARCH_MSM8X60
				678	default n
				679	bool "MSM8x60 SURF"
				680	help
				681	Support for the Qualcomm MSM8x60 SURF eval board.
				682
Gregory Bean	69b7f6f	2010-04-04 22:29:02 -0700	[diff] [blame]	683	config MACH_MSM8X60_FFA
				684	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	685	default n
Gregory Bean	69b7f6f	2010-04-04 22:29:02 -0700	[diff] [blame]	686	bool "MSM8x60 FFA"
				687	help
				688	Support for the Qualcomm MSM8x60 FFA eval board.
				689
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	690	config MACH_MSM8X60_FLUID
				691	depends on ARCH_MSM8X60
				692	default n
				693	bool "MSM8x60 FLUID"
				694	help
				695	Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
				696	8x60 target which has a form factor that is much closer to that
				697	of a phone than other targets. It also has a new display and
				698	touchscreen controller.
				699
				700	config MACH_MSM8X60_FUSION
				701	depends on ARCH_MSM8X60
				702	default n
				703	bool "MSM8x60 FUSION"
				704	help
				705	Support for the Qualcomm MSM8x60 Fusion SURF device.
				706
				707	config MACH_MSM8X60_FUSN_FFA
				708	depends on ARCH_MSM8X60
				709	default n
				710	bool "MSM8x60 FUSN FFA"
				711	help
				712	Support for the Qualcomm MSM8x60 Fusion FFA device.
				713
Zhang Chang Ken	ef05b17	2011-07-27 15:28:13 -0400	[diff] [blame]	714	config MACH_MSM8X60_DRAGON
				715	depends on ARCH_MSM8X60
				716	default n
				717	bool "MSM8x60 DRAGON"
				718	help
				719	Support for the Qualcomm MSM8x60 Dragon board.
				720
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	721	config MACH_MSM8960_SIM
				722	depends on ARCH_MSM8960
				723	bool "MSM8960 Simulator"
				724	help
				725	Support for the Qualcomm MSM8960 simulator.
				726
Stepan Moskovchenko	50ede4e	2010-12-13 18:12:19 -0800	[diff] [blame]	727	config MACH_MSM8960_RUMI3
				728	depends on ARCH_MSM8960
				729	bool "MSM8960 RUMI3"
				730	help
				731	Support for the Qualcomm MSM8960 RUMI3 emulator.
				732
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	733	config MACH_MSM8960_CDP
				734	depends on ARCH_MSM8960
				735	bool "MSM8960 CDP"
				736	help
				737	Support for the Qualcomm MSM8960 CDP device.
				738
				739	config MACH_MSM8960_MTP
				740	depends on ARCH_MSM8960
				741	bool "MSM8960 MTP"
				742	help
				743	Support for the Qualcomm MSM8960 MTP device.
				744
				745	config MACH_MSM8960_FLUID
				746	depends on ARCH_MSM8960
				747	bool "MSM8960 FLUID"
				748	help
				749	Support for the Qualcomm MSM8960 FLUID device.
				750
Amir Samuelov	0d1f8ae	2011-07-28 11:13:58 +0300	[diff] [blame]	751	config MACH_MSM8960_LIQUID
				752	depends on ARCH_MSM8960
				753	bool "MSM8960 LIQUID"
				754	help
				755	Support for the Qualcomm MSM8960 LIQUID device.
				756
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	757	config MACH_MSM8930_CDP
				758	depends on ARCH_MSM8930
				759	bool "MSM8930 CDP"
				760	help
				761	Support for the Qualcomm MSM8930 CDP device.
				762
				763	config MACH_MSM8930_MTP
				764	depends on ARCH_MSM8930
				765	bool "MSM8930 MTP"
				766	help
				767	Support for the Qualcomm MSM8930 MTP device.
				768
				769	config MACH_MSM8930_FLUID
				770	depends on ARCH_MSM8930
				771	bool "MSM8930 FLUID"
				772	help
				773	Support for the Qualcomm MSM8930 FLUID device.
				774
Stepan Moskovchenko	8768eff	2011-12-01 18:55:07 -0800	[diff] [blame]	775	config MACH_MSM8627_CDP
				776	depends on ARCH_MSM8930
				777	bool "MSM8627 CDP"
				778	help
				779	Support for the Qualcomm MSM8627 CDP device.
				780
				781	config MACH_MSM8627_MTP
				782	depends on ARCH_MSM8930
				783	bool "MSM8627 MTP"
				784	help
				785	Support for the Qualcomm MSM8627 MTP device.
				786
Rohit Vaswani	a8e7a83	2011-09-28 21:00:05 -0700	[diff] [blame]	787	config MACH_MSM9615_CDP
				788	depends on ARCH_MSM9615
				789	bool "MSM9615 CDP"
				790	help
				791	Support for the Qualcomm MSM9615 CDP device.
				792
				793	config MACH_MSM9615_MTP
				794	depends on ARCH_MSM9615
				795	bool "MSM9615 MTP"
				796	help
				797	Support for the Qualcomm MSM9615 MTP device.
				798
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	799	config MSM_USE_TSIF1
				800	depends on ARCH_MSM8X60
				801	bool "MSM8x60 use TSIF1"
				802	help
				803	Selects TSIF1 core to be used rather than TSIF0.
				804	The two TSIF cores share the same DM configuration
				805	so they cannot be used simultaneously.
				806
				807	config MACH_APQ8064_SIM
				808	depends on ARCH_APQ8064
				809	bool "APQ8064 Simulator"
				810	help
				811	Support for the Qualcomm APQ8064 simulator.
				812
Stepan Moskovchenko	d256ddf	2011-09-08 12:34:46 -0700	[diff] [blame]	813	config MACH_APQ8064_RUMI3
				814	depends on ARCH_APQ8064
				815	bool "APQ8064 RUMI3"
				816	help
				817	Support for the Qualcomm APQ8064 RUMI3 emulator.
				818
Joel King	82b7e3f	2012-01-05 10:03:27 -0800	[diff] [blame]	819	config MACH_APQ8064_CDP
				820	depends on ARCH_APQ8064
				821	bool "APQ8064 CDP"
				822	help
				823	Support for the Qualcomm APQ8064 CDP device.
				824
				825	config MACH_APQ8064_MTP
				826	depends on ARCH_APQ8064
				827	bool "APQ8064 MTP"
				828	help
				829	Support for the Qualcomm APQ8064 MTP device.
				830
				831	config MACH_APQ8064_LIQUID
				832	depends on ARCH_APQ8064
				833	bool "APQ8064 LIQUID"
				834	help
				835	Support for the Qualcomm APQ8064 LIQUID device.
				836
Joel King	064bbf8	2012-04-01 13:23:39 -0700	[diff] [blame]	837	config MACH_MPQ8064_CDP
				838	depends on ARCH_APQ8064
				839	bool "MPQ8064 CDP"
				840	help
				841	Support for the Qualcomm MPQ8064 CDP device.
				842
Joel King	11ca820	2012-02-13 16:19:03 -0800	[diff] [blame]	843	config MACH_MPQ8064_HRD
				844	depends on ARCH_APQ8064
				845	bool "MPQ8064 HRD"
				846	help
				847	Support for the Qualcomm MPQ8064 HRD device.
				848
				849	config MACH_MPQ8064_DTV
				850	depends on ARCH_APQ8064
				851	bool "MPQ8064 DTV"
				852	help
				853	Support for the Qualcomm MPQ8064 DTV device.
				854
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	855	config MACH_FSM9XXX_SURF
				856	depends on ARCH_FSM9XXX
				857	depends on !MSM_STACKED_MEMORY
				858	default y
				859	bool "FSM9XXX SURF"
				860	help
				861	Support for the Qualcomm FSM9xxx femtocell
				862	chipset based SURF evaluation board and
				863	FFA board.
				864
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	865	endmenu
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	866
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	867	config MSM_STACKED_MEMORY
				868	bool "Stacked Memory"
				869	default y
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	870	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	871	This option is used to indicate the presence of on-die stacked
				872	memory. When present this memory bank is used for a high speed
				873	shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	874
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	875	config PHYS_OFFSET
				876	hex
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	877	default "0x40800000" if ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	878	default "0x80200000" if ARCH_APQ8064
				879	default "0x80200000" if ARCH_MSM8960
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	880	default "0x80200000" if ARCH_MSM8930
Sathish Ambley	39a1dc4	2012-03-19 21:46:26 -0700	[diff] [blame]	881	default "0x20200000" if ARCH_MSMCOPPER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	882	default "0x10000000" if ARCH_FSM9XXX
Rohit Vaswani	fafe249	2012-04-23 18:54:12 -0700	[diff] [blame]	883	default "0x20200000" if ARCH_MSM9625
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	884	default "0x00200000" if !MSM_STACKED_MEMORY
				885	default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
				886	default "0x20000000" if ARCH_QSD8X50
				887	default "0x40200000" if ARCH_MSM8X60
				888	default "0x10000000"
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	889
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	890	config KERNEL_PMEM_EBI_REGION
				891	bool "Enable in-kernel PMEM region for EBI"
				892	default y if ARCH_MSM8X60
Olav Haugan	b800c8c	2012-01-30 08:50:45 -0800	[diff] [blame]	893	depends on ANDROID_PMEM && (ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSMCOPPER)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	894	help
				895	Enable the in-kernel PMEM allocator to use EBI memory.
				896
				897	config KERNEL_PMEM_SMI_REGION
				898	bool "Enable in-kernel PMEM region for SMI"
				899	default y if ARCH_MSM8X60
				900	depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) \|\| (ARCH_MSM8X60 && !VCM))
				901	help
				902	Enable the in-kernel PMEM allocator to use SMI memory.
				903
				904	config PMEM_GPU0
				905	bool "Enable PMEM GPU0 region"
				906	default y
				907	depends on ARCH_QSD8X50 && ANDROID_PMEM
				908	help
				909	Enable the PMEM GPU0 device on SMI Memory.
				910
				911	config MSM_AMSS_VERSION
				912	int
				913	default 6210 if MSM_AMSS_VERSION_6210
				914	default 6220 if MSM_AMSS_VERSION_6220
				915	default 6225 if MSM_AMSS_VERSION_6225
				916
				917	choice
				918	prompt "AMSS modem firmware version"
				919
				920	default MSM_AMSS_VERSION_6225
				921
				922	config MSM_AMSS_VERSION_6210
				923	bool "6.2.10"
				924
				925	config MSM_AMSS_VERSION_6220
				926	bool "6.2.20"
				927
				928	config MSM_AMSS_VERSION_6225
				929	bool "6.2.20 + New ADSP"
				930	endchoice
Stepan Moskovchenko	2607b0a	2010-11-15 17:46:10 -0800	[diff] [blame]	931
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	932	config MSM_HAS_DEBUG_UART_HS
				933	bool
				934	help
				935	Say Y here if high speed MSM UART is present.
				936
				937	config MSM_HAS_DEBUG_UART_HS_V14
				938	bool
				939	select MSM_HAS_DEBUG_UART_HS
				940	help
				941	Say Y here if high speed MSM UART v1.4 is present.
				942
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	943	config DEBUG_MSM8930_UART
				944	bool "Kernel low-level debugging messages via MSM 8930 UART"
				945	depends on ARCH_MSM8930 && DEBUG_LL
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	946	select MSM_HAS_DEBUG_UART_HS
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	947	help
				948	Say Y here if you want the debug print routines to direct
				949	their output to the serial port on MSM 8930 devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	950
Taniya Das	fa4ee7f	2012-02-21 15:04:51 +0530	[diff] [blame]	951	config MSM_DEBUG_UART_PHYS
				952	hex
				953	default 0xA9A00000 if (ARCH_MSM7X27 \|\| ARCH_QSD8X50) && DEBUG_MSM_UART1
				954	default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1
				955	default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1
				956	default 0xA9B00000 if (ARCH_MSM7X27 \|\| ARCH_QSD8X50) && DEBUG_MSM_UART2
				957	default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2
				958	default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2
				959	default 0xA9C00000 if (ARCH_MSM7X27 \|\| ARCH_QSD8X50) && DEBUG_MSM_UART3
				960	default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3
				961
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	962	choice
				963	prompt "Debug UART"
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	964	depends on DEBUG_LL
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	965
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	966	config DEBUG_MSM_UART1
				967	bool "Kernel low-level debugging messages via MSM UART1"
Taniya Das	fa4ee7f	2012-02-21 15:04:51 +0530	[diff] [blame]	968	depends on ARCH_MSM7X27 \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50 \|\| ARCH_FSM9XXX
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	969	help
				970	Say Y here if you want the debug print routines to direct
				971	their output to the first serial port on MSM devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	972
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	973	config DEBUG_MSM_UART2
				974	bool "Kernel low-level debugging messages via MSM UART2"
Taniya Das	fa4ee7f	2012-02-21 15:04:51 +0530	[diff] [blame]	975	depends on ARCH_MSM7X27 \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50 \|\| ARCH_FSM9XXX
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	976	help
				977	Say Y here if you want the debug print routines to direct
				978	their output to the second serial port on MSM devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	979
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	980	config DEBUG_MSM_UART3
				981	bool "Kernel low-level debugging messages via MSM UART3"
Taniya Das	fa4ee7f	2012-02-21 15:04:51 +0530	[diff] [blame]	982	depends on ARCH_MSM7X27 \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	983	help
				984	Say Y here if you want the debug print routines to direct
				985	their output to the third serial port on MSM devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	986
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	987	config DEBUG_MSM8660_UART
				988	bool "Kernel low-level debugging messages via MSM 8660 UART"
				989	depends on ARCH_MSM8X60
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	990	select MSM_HAS_DEBUG_UART_HS
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	991	help
				992	Say Y here if you want the debug print routines to direct
				993	their output to the serial port on MSM 8660 devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	994
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	995	config DEBUG_MSM8960_UART
				996	bool "Kernel low-level debugging messages via MSM 8960 UART"
				997	depends on ARCH_MSM8960
				998	select DEBUG_MSM8930_UART
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	999	select MSM_HAS_DEBUG_UART_HS
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	1000	help
				1001	Say Y here if you want the debug print routines to direct
				1002	their output to the serial port on MSM 8960 devices.
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	1003
				1004	config DEBUG_MSMCOPPER_UART
				1005	bool "Kernel low-level debugging messages via MSM Copper UART"
				1006	depends on ARCH_MSMCOPPER
				1007	select MSM_HAS_DEBUG_UART_HS_V14
				1008	help
				1009	Say Y here if you want the debug print routines to direct
				1010	their output to the serial port on MSM Copper devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	1011	endchoice
				1012
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1013	choice
				1014	prompt "Default Timer"
				1015	default MSM7X00A_USE_GP_TIMER
				1016
				1017	config MSM7X00A_USE_GP_TIMER
				1018	bool "GP Timer"
				1019	help
				1020	Low resolution timer that allows power collapse from idle.
				1021
				1022	config MSM7X00A_USE_DG_TIMER
				1023	bool "DG Timer"
				1024	help
				1025	High resolution timer.
				1026	endchoice
				1027
				1028	choice
				1029	prompt "Suspend sleep mode"
				1030	default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1031	help
				1032	Allows overriding the sleep mode used. Leave at power
				1033	collapse suspend unless the arm9 image has problems.
				1034
				1035	config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1036	bool "Power collapse suspend"
				1037	help
				1038	Lowest sleep state. Returns through reset vector.
				1039
				1040	config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
				1041	bool "Power collapse"
				1042	help
				1043	Sleep state that returns through reset vector.
				1044
				1045	config MSM7X00A_SLEEP_MODE_APPS_SLEEP
				1046	bool "Apps Sleep"
				1047
				1048	config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				1049	bool "Ramp down cpu clock and wait for interrupt"
				1050
				1051	config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
				1052	bool "Wait for interrupt"
				1053	endchoice
				1054
				1055	config MSM7X00A_SLEEP_MODE
				1056	int
				1057	default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1058	default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
				1059	default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
				1060	default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				1061	default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
				1062
				1063	choice
				1064	prompt "Idle sleep mode"
				1065	default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				1066	help
				1067	Allows overriding the sleep mode used from idle. Leave at power
				1068	collapse suspend unless the arm9 image has problems.
				1069
				1070	config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1071	bool "Power collapse suspend"
				1072	help
				1073	Lowest sleep state. Returns through reset vector.
				1074
				1075	config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				1076	bool "Power collapse"
				1077	help
				1078	Sleep state that returns through reset vector.
				1079
				1080	config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
				1081	bool "Apps Sleep"
				1082
				1083	config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				1084	bool "Ramp down cpu clock and wait for interrupt"
				1085
				1086	config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
				1087	bool "Wait for interrupt"
				1088	endchoice
				1089
				1090	config MSM7X00A_IDLE_SLEEP_MODE
				1091	int
				1092	default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1093	default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				1094	default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
				1095	default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				1096	default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
				1097
				1098	config MSM7X00A_IDLE_SLEEP_MIN_TIME
				1099	int "Minimum idle time before sleep"
				1100	default 20000000
				1101	help
				1102	Minimum idle time in nanoseconds before entering low power mode.
				1103
				1104	config MSM7X00A_IDLE_SPIN_TIME
				1105	int "Idle spin time before cpu ramp down"
				1106	default 80000
				1107	help
				1108	Spin time in nanoseconds before ramping down cpu clock and entering
				1109	any low power state.
				1110
				1111	menuconfig MSM_IDLE_STATS
				1112	bool "Collect idle statistics"
				1113	default y
				1114	help
				1115	Collect idle statistics and export them in proc/msm_pm_stats.
				1116
				1117	if MSM_IDLE_STATS
				1118
				1119	config MSM_IDLE_STATS_FIRST_BUCKET
				1120	int "First bucket time"
				1121	default 62500
				1122	help
				1123	Upper time limit in nanoseconds of first bucket.
				1124
				1125	config MSM_IDLE_STATS_BUCKET_SHIFT
				1126	int "Bucket shift"
				1127	default 2
				1128
				1129	config MSM_IDLE_STATS_BUCKET_COUNT
				1130	int "Bucket count"
				1131	default 10
				1132
				1133	config MSM_SUSPEND_STATS_FIRST_BUCKET
				1134	int "First bucket time for suspend"
				1135	default 1000000000
				1136	help
				1137	Upper time limit in nanoseconds of first bucket of the
				1138	histogram. This is for collecting statistics on suspend.
				1139
				1140	endif # MSM_IDLE_STATS
				1141
				1142	config CPU_HAS_L2_PMU
				1143	bool "L2CC PMU Support"
				1144	help
				1145	Select this if the L2 cache controller has a Performance Monitoring Unit.
				1146
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1147	config HTC_HEADSET
				1148	tristate "HTC 2 Wire detection driver"
				1149	default n
				1150	help
				1151	Provides support for detecting HTC 2 wire devices, such as wired
				1152	headset, on the trout platform. Can be used with the msm serial
				1153	debugger, but not with serial console.
				1154
				1155	config TROUT_BATTCHG
				1156	depends on MACH_TROUT && POWER_SUPPLY
				1157	default y
				1158	bool "Trout battery / charger driver"
				1159
				1160	config HTC_PWRSINK
				1161	depends on MSM_SMD
				1162	default n
				1163	bool "HTC Power Sink Driver"
				1164
				1165	config QSD_SVS
				1166	bool "QSD Static Voltage Scaling"
				1167	depends on (MACH_QSD8X50_SURF \|\| MACH_QSD8X50_FFA)
				1168	default y
				1169	select TPS65023
				1170	help
				1171	Enables static voltage scaling using the TPS65023 PMIC.
				1172
				1173	config QSD_PMIC_DEFAULT_DCDC1
				1174	int "PMIC default output voltage"
				1175	depends on (MACH_QSD8X50_SURF \|\| MACH_QSD8X50_FFA)
				1176	default 1250
				1177	help
				1178	This is the PMIC voltage at Linux kernel boot.
				1179
				1180	config MSM_FIQ_SUPPORT
				1181	default y
				1182	bool "Enable installation of an FIQ handler."
				1183
				1184	config MSM_SERIAL_DEBUGGER
				1185	select MSM_FIQ_SUPPORT
				1186	select KERNEL_DEBUGGER_CORE
				1187	default n
				1188	bool "FIQ Mode Serial Debugger"
				1189	help
				1190	The FIQ serial debugger can accept commands even when the
				1191	kernel is unresponsive due to being stuck with interrupts
				1192	disabled. Depends on the kernel debugger core in drivers/misc.
				1193
				1194	config MSM_SERIAL_DEBUGGER_CONSOLE
				1195	depends on MSM_SERIAL_DEBUGGER
				1196	default n
				1197	bool "Console on FIQ Serial Debugger port"
				1198	help
				1199	Enables a console so that printk messages are displayed on
				1200	the debugger serial port as the occur.
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	1201
Steve Muckle	c8aabae	2010-04-21 16:20:27 -0700	[diff] [blame]	1202	config MSM_PROC_COMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1203	default y
				1204	bool "Proc-Comm RPC Interface"
				1205	help
				1206	Enables a lightweight communications interface to the
				1207	baseband processor.
Steve Muckle	c8aabae	2010-04-21 16:20:27 -0700	[diff] [blame]	1208
Brian Swetland	2eb44eb	2008-09-29 16:00:48 -0700	[diff] [blame]	1209	config MSM_SMD
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1210	bool "MSM Shared Memory Driver (SMD)"
				1211	help
				1212	Support for the shared memory interface between the apps
				1213	processor and the baseband processor. Provides access to
				1214	the "shared heap", as well as virtual serial channels
				1215	used to communicate with various services on the baseband
				1216	processor.
				1217
				1218	choice
				1219	prompt "MSM Shared memory interface version"
				1220	depends on MSM_SMD
				1221	default MSM_SMD_PKG3 if ARCH_MSM_ARM11
				1222	default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
				1223
				1224	config MSM_SMD_PKG3
				1225	bool
				1226	prompt "Package 3"
				1227
				1228	config MSM_SMD_PKG4
				1229	bool
				1230	prompt "Package 4"
				1231	endchoice
				1232
Niranjana Vishwanathapura	f1427ac	2012-05-03 14:28:21 -0600	[diff] [blame]	1233	config MSM_PCIE
				1234	bool "MSM PCIe Controller driver"
				1235	depends on PCI && PCI_MSI
				1236	help
				1237	Enables the PCIe functionality by configures PCIe core on
				1238	MSM chipset and by enabling the ARM PCI framework extension.
				1239
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1240	config MSM_RPC_SDIO_XPRT
				1241	depends on MSM_SDIO_AL
				1242	default y
				1243	bool "MSM SDIO XPRT Layer"
				1244	help
				1245	SDIO Transport Layer for RPC Rouer
				1246
				1247	config MSM_RPC_SDIO_DEBUG
				1248	depends on MSM_RPC_SDIO_XPRT
				1249	default y
				1250	bool "MSM SDIO XPRT debug support"
				1251	help
				1252	Support for debugging SDIO XPRT
				1253
				1254	config MSM_SMD_DEBUG
				1255	depends on MSM_SMD
				1256	default y
				1257	bool "MSM SMD debug support"
				1258	help
				1259	Support for debugging the SMD for communication
				1260	between the ARM9 and ARM11
				1261
				1262	config MSM_SDIO_AL
				1263	depends on ((ARCH_MSM7X30 \|\| MACH_MSM8X60_FUSN_FFA \|\| MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
				1264	default y
				1265	tristate "SDIO-Abstraction-Layer"
				1266	help
				1267	Support MSM<->MDM Communication over SDIO bus.
				1268	MDM SDIO-Client should have pipes support.
				1269
				1270	config MSM_SDIO_DMUX
				1271	bool "SDIO Data Mux Driver"
				1272	depends on MSM_SDIO_AL
				1273	default n
				1274	help
				1275	Support Muxed Data Channels over SDIO interface.
				1276
				1277	config MSM_BAM_DMUX
				1278	bool "BAM Data Mux Driver"
				1279	depends on SPS
				1280	default n
				1281	help
				1282	Support Muxed Data Channels over BAM interface.
				1283	BAM has a limited number of pipes. This driver
				1284	provides a means to support more logical channels
				1285	via muxing than BAM could without muxing.
				1286
				1287	config MSM_N_WAY_SMD
Jeff Hugo	0c0f5e9	2011-09-28 13:55:45 -0600	[diff] [blame]	1288	depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1289	default y
				1290	bool "MSM N-WAY SMD support"
				1291	help
				1292	Supports APPS-QDSP SMD communication along with
				1293	normal APPS-MODEM SMD communication.
				1294
				1295	config MSM_N_WAY_SMSM
Jeff Hugo	0c0f5e9	2011-09-28 13:55:45 -0600	[diff] [blame]	1296	depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1297	default y
				1298	bool "MSM N-WAY SMSM support"
				1299	help
				1300	Supports APPS-QDSP SMSM communication along with
				1301	normal APPS-MODEM SMSM communication.
				1302
				1303	config MSM_RESET_MODEM
				1304	tristate "Reset Modem Driver"
				1305	depends on MSM_SMD
				1306	default m
				1307	help
				1308	Allows the user to reset the modem through a device node.
				1309
				1310	config MSM_SMD_LOGGING
				1311	depends on MSM_SMD
				1312	default y
				1313	bool "MSM Shared Memory Logger"
				1314	help
				1315	This option exposes the shared memory logger at /dev/smem_log
				1316	and a debugfs node named smem_log.
				1317
				1318	If in doubt, say yes.
				1319
Karthikeyan Ramasubramanian	e1f4f73	2011-08-08 13:34:47 -0600	[diff] [blame]	1320	config MSM_IPC_LOGGING
				1321	bool "MSM Debug Logging for IPC Drivers"
				1322	help
				1323	This option allows the debug logging for IPC Drivers.
				1324
				1325	If in doubt, say no.
				1326
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1327	config MSM_SMD_NMEA
				1328	bool "NMEA GPS Driver"
				1329	depends on MSM_SMD
				1330	default y
				1331	help
				1332	Enable this to support the NMEA GPS device.
				1333
				1334	If in doubt, say yes.
				1335
				1336	config MSM_SDIO_TTY
				1337	bool "SDIO TTY Driver"
				1338	depends on MSM_SDIO_AL
				1339	default n
				1340	help
				1341	Provides a TTY driver SDIO TTY
				1342	This driver can be used by user space
				1343	applications for passing data through the
				1344	SDIO interface.
				1345
				1346	config MSM_SMD_TTY
				1347	bool "SMD TTY Driver"
				1348	depends on MSM_SMD
				1349	default y
				1350	help
				1351	Provides TTY interfaces to interact with the modem.
				1352
				1353	If in doubt, say yes.
				1354
				1355	config MSM_SMD_QMI
				1356	bool "SMD QMI Driver"
				1357	depends on MSM_SMD
				1358	default y
				1359	help
				1360	Manages network data connections.
				1361
				1362	If in doubt, say yes.
				1363
				1364	config MSM_SMD_PKT
				1365	bool "SMD Packet Driver"
				1366	depends on MSM_SMD
				1367	default y
				1368	help
				1369	Provides a binary SMD non-muxed packet port interface.
				1370
				1371	If in doubt, say yes.
				1372
				1373	config MSM_SDIO_CMUX
				1374	bool "SDIO CMUX Driver"
				1375	depends on MSM_SDIO_AL
				1376	default n
				1377	help
				1378	Provides a Muxed port interface over SDIO QMI
				1379
				1380	config MSM_DSPS
				1381	bool "Sensors DSPS driver"
				1382	depends on (MSM_PIL && (ARCH_MSM8X60 \|\| ARCH_MSM8960))
				1383	default n
				1384	help
				1385	Provides user-space interface to the sensors manager
				1386	to turn on/off the Sensors Processor system clocks.
				1387	It is the DSPS responsibility to turn on/off the sensors
				1388	themself.
				1389	The number of clocks and their name may vary between targets.
				1390	It also triggers the PIL to load the DSPS firmware.
				1391
				1392	config MSM_SDIO_CTL
				1393	bool "SDIO CTL Driver"
				1394	depends on MSM_SDIO_CMUX
				1395	default n
				1396	help
				1397	Provides a binary SDIO control port interface.
				1398
				1399	config MSM_ONCRPCROUTER
				1400	depends on MSM_SMD
				1401	default n
				1402	bool "MSM ONCRPC router support"
				1403	help
				1404	Support for the MSM ONCRPC router for communication between
				1405	the ARM9 and ARM11
				1406
				1407	config MSM_IPC_ROUTER
Karthikeyan Ramasubramanian	da45b43	2011-09-23 14:39:30 -0600	[diff] [blame]	1408	depends on NET
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1409	default n
				1410	bool "MSM IPC Router support"
				1411	help
				1412	Support for the MSM IPC Router for communication between
				1413	the APPs and the MODEM
				1414
Karthikeyan Ramasubramanian	da45b43	2011-09-23 14:39:30 -0600	[diff] [blame]	1415	config MSM_IPC_ROUTER_SMD_XPRT
				1416	depends on MSM_SMD
				1417	depends on MSM_IPC_ROUTER
				1418	default n
				1419	bool "MSM SMD XPRT Layer"
				1420	help
				1421	SMD Transport Layer for IPC Router
				1422
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1423	config MSM_ONCRPCROUTER_DEBUG
				1424	depends on MSM_ONCRPCROUTER
				1425	default y
				1426	bool "MSM debug ONCRPC router support"
				1427	help
				1428	Support for debugging the ONCRPC router for communication
				1429	between the ARM9 and ARM11
				1430
				1431	config MSM_RPC_LOOPBACK_XPRT
				1432	depends on MSM_ONCRPCROUTER
				1433	default n
				1434	bool "MSM RPC local routing support"
				1435	help
				1436	Support for routing RPC messages between APPS clients
				1437	and APPS servers. Helps in testing APPS RPC framework.
				1438
				1439	config MSM_RPCSERVER_TIME_REMOTE
				1440	depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
				1441	default y
				1442	bool "Time remote RPC server"
				1443	help
				1444	The time remote server receives notification of time bases and
				1445	reports these events to registered callback functions.
				1446
				1447	config MSM_RPCSERVER_WATCHDOG
				1448	depends on MSM_ONCRPCROUTER
				1449	default y
				1450	bool "Watchdog RPC server"
				1451	help
				1452	The dog_keepalive server handles watchdog events.
				1453
				1454	config MSM_RPC_WATCHDOG
				1455	depends on MSM_ONCRPCROUTER
				1456	default n
				1457	bool "Watchdog RPC client"
				1458	help
				1459	The dog_keepalive client module.
				1460
				1461	config MSM_RPC_PING
				1462	depends on MSM_ONCRPCROUTER && DEBUG_FS
				1463	default m
				1464	bool "MSM rpc ping"
				1465	help
				1466	Implements MSM rpc ping test module.
				1467
				1468	config MSM_RPC_PROC_COMM_TEST
				1469	depends on DEBUG_FS && MSM_PROC_COMM
				1470	default m
				1471	bool "MSM rpc proc comm test"
				1472	help
				1473	Implements MSM rpc proc comm test module.
				1474
				1475	config MSM_RPC_OEM_RAPI
				1476	depends on MSM_ONCRPCROUTER
				1477	default m
				1478	bool "MSM oem rapi"
				1479	help
				1480	Implements MSM oem rapi client module.
				1481
				1482	config MSM_RPCSERVER_HANDSET
				1483	depends on MSM_ONCRPCROUTER
				1484	default y
				1485	bool "Handset events RPC server"
				1486	help
				1487	Support for receiving handset events like headset detect,
				1488	headset switch and clamshell state.
				1489
				1490	config MSM_RMT_STORAGE_CLIENT
				1491	depends on (ARCH_MSM && MSM_ONCRPCROUTER)
				1492	default n
				1493	bool "Remote Storage RPC client"
				1494	help
				1495	Provide RPC mechanism for remote processors to access storage
				1496	device on apps processor.
				1497
				1498	config MSM_RMT_STORAGE_CLIENT_STATS
				1499	depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
				1500	default n
				1501	bool "Remote storage RPC client performance statistics"
				1502	help
				1503	Collects performance statistics and shows this information
				1504	through a debugfs file rmt_storage_stats.
				1505
				1506	config MSM_SDIO_SMEM
				1507	depends on MSM_SDIO_AL
				1508	default n
				1509	bool "SDIO SMEM for remote storage"
				1510	help
				1511	Copies data from remote MDM9K memory to local MSM8x60
				1512	memory. Used by remote storage client to shadow
				1513	MDM9K filesystem.
				1514
				1515	config MSM_DALRPC
				1516	bool "DAL RPC support"
Bryan Huntsman	18b3c0c	2011-11-23 15:12:58 -0800	[diff] [blame]	1517	default n
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1518	help
				1519	Supports RPC calls to DAL devices on remote processor cores.
				1520
				1521	config MSM_DALRPC_TEST
				1522	tristate "DAL RPC test module"
				1523	depends on (MSM_DALRPC && DEBUG_FS)
				1524	default m
				1525	help
				1526	Exercises DAL RPC calls to QDSP6.
				1527
				1528	if CPU_FREQ_MSM
				1529
				1530	config MSM_CPU_FREQ_SET_MIN_MAX
				1531	bool "Set Min/Max CPU frequencies."
				1532	default n
				1533	help
				1534	Allow setting min and max CPU frequencies. Sysfs can be used
				1535	to override these values.
				1536
				1537	config MSM_CPU_FREQ_MAX
				1538	int "Max CPU Frequency"
				1539	depends on MSM_CPU_FREQ_SET_MIN_MAX
				1540	default 384000
				1541
				1542	config MSM_CPU_FREQ_MIN
				1543	int "Min CPU Frequency"
				1544	depends on MSM_CPU_FREQ_SET_MIN_MAX
				1545	default 245760
				1546
				1547	endif # CPU_FREQ_MSM
				1548
				1549	config MSM_CPU_AVS
				1550	bool "Enable software controlled Adaptive Voltage Scaling (AVS)"
				1551	depends on (ARCH_MSM_SCORPION && QSD_SVS)
				1552	depends on ARCH_QSD8X50
				1553	default n
				1554	select MSM_AVS_HW
				1555	help
				1556	This enables the s/w control of Adaptive Voltage Scaling feature
				1557	in Qualcomm ARMv7 CPUs. It adjusts the voltage for each frequency
				1558	based on feedback from three ring oscillators in the CPU.
				1559
				1560	config MSM_AVS_HW
				1561	bool "Enable Adaptive Voltage Scaling (AVS)"
				1562	default n
				1563	help
				1564	Enable AVS hardware to fine tune voltage at each frequency. The
				1565	AVS hardware blocks associated with each Qualcomm ARMv7 cores can
				1566	fine tune the voltages based on the feedback from the ring
				1567	oscillators.
				1568
				1569	config MSM_HW3D
				1570	tristate "MSM Hardware 3D Register Driver"
				1571	depends on ANDROID_PMEM
				1572	default y
				1573	help
				1574	Provides access to registers needed by the userspace OpenGL\|ES
				1575	library.
				1576
				1577	config MSM_ADSP
				1578	depends on (ARCH_MSM7X01A \|\| ARCH_MSM7X25 \|\| ARCH_MSM7X27)
				1579	tristate "MSM ADSP driver"
				1580	depends on ANDROID_PMEM
				1581	default y
				1582	help
				1583	Provides access to registers needed by the userspace aDSP library.
				1584
				1585	config ADSP_RPC_VER
				1586	hex
				1587	default 0x30002 if (ARCH_MSM7X27 \|\| (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
				1588	default 0x30001 if (ARCH_MSM7X01A \|\| (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
				1589	depends on MSM_ADSP
				1590	help
				1591	Select proper ADSP RPC version
				1592	choice
				1593	prompt "ADSP RPC version"
				1594
				1595	default AMSS_7X25_VERSION_2009
				1596
				1597	config AMSS_7X25_VERSION_2009
				1598	bool "2.0.09"
				1599
				1600	config AMSS_7X25_VERSION_2008
				1601	bool "2.0.08"
				1602	endchoice
				1603
				1604	config MSM7KV2_AUDIO
				1605	bool "MSM7K v2 audio"
				1606	depends on (ARCH_MSM7X30 && ANDROID_PMEM)
				1607	default y
				1608	help
				1609	Enables QDSP5V2-based audio drivers for audio playbacks and
				1610	voice call.
				1611
				1612	config MSM_ADSP_REPORT_EVENTS
				1613	bool "Report modem events from the DSP"
				1614	default y
				1615	depends on (MSM_ADSP \|\| MSM7KV2_AUDIO)
				1616	help
				1617	Normally, only messages from the aDSP are reported to userspace.
				1618	With this option, we report events from the aDSP as well.
				1619
				1620	config MSM_QDSP6
				1621	tristate "QDSP6 support"
				1622	depends on ARCH_QSD8X50 && ANDROID_PMEM
				1623	default y
				1624	help
				1625	Enable support for qdsp6. This provides audio and video functionality.
				1626
				1627	config MSM8X60_AUDIO
				1628	tristate "MSM8X60 audio support"
				1629	depends on ARCH_MSM8X60 && ANDROID_PMEM
				1630	default y
				1631	help
				1632	Enable support for qdsp6v2. This provides audio functionality.
				1633
				1634	config MSM8X60_FTM_AUDIO_DEVICES
				1635	bool "MSM8X60 audio factory test mode support"
				1636	depends on MSM8X60_AUDIO
				1637	help
				1638	Enable support audio factory test mode devices. This is used
				1639	in a production line environment.
				1640
Ben Romberger	45b351c	2011-07-20 22:37:27 -0700	[diff] [blame]	1641	config RTAC
				1642	bool "MSM8K real-time audio calibration support"
				1643	default y
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1644	help
Ben Romberger	45b351c	2011-07-20 22:37:27 -0700	[diff] [blame]	1645	Enable support for rtac. This enables calibration during
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1646	audio operation
				1647
				1648	config MSM7X27A_AUDIO
				1649	bool "MSM7X27A audio support"
				1650	depends on ARCH_MSM7X27A && MSM_ADSP
				1651	default n
				1652	help
				1653	Enable support for 7x27a. This provides audio functionality.
				1654
Justin Paupore	a6cd209	2011-06-22 16:19:45 -0700	[diff] [blame]	1655	config MSM_PROC_COMM_REGULATOR
				1656	bool
				1657	depends on MSM_PROC_COMM && REGULATOR
				1658	help
				1659	Enable regulator framework support for regulators managed by PMLIB
				1660	on the modem, and controlled through proccomm calls.
				1661
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1662	config MSM_VREG_SWITCH_INVERTED
				1663	bool "Reverse vreg switch polarity"
				1664	default n
				1665	help
				1666	Reverses the enable and disable for vreg switch.
				1667
				1668	config MSM_DMA_TEST
				1669	tristate "MSM DMA test module"
				1670	default m
				1671	help
				1672	Intended to be compiled as a module. Provides a device node
				1673	and ioctls for testing the MSM dma system.
				1674
				1675	config WIFI_CONTROL_FUNC
				1676	bool "Enable WiFi control function abstraction"
				1677	help
				1678	Enables Power/Reset/Carddetect function abstraction
				1679
				1680	config WIFI_MEM_PREALLOC
				1681	depends on WIFI_CONTROL_FUNC
				1682	bool "Preallocate memory for WiFi buffers"
				1683	help
				1684	Preallocates memory buffers for WiFi driver
				1685
				1686	config QSD_AUDIO
				1687	bool "QSD audio"
				1688	depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP
				1689	default y
				1690	help
				1691	Provides PCM, MP3, and AAC audio playback.
				1692
				1693	config AUDIO_AAC_PLUS
				1694	depends on (MSM_ADSP \|\| QSD_AUDIO \|\| MSM7KV2_AUDIO)
				1695	bool "AAC+ Audio"
				1696	default y
				1697	help
				1698	Provides AAC+ decoding
				1699
				1700	config AUDIO_ENHANCED_AAC_PLUS
				1701	depends on AUDIO_AAC_PLUS
				1702	bool "Enhanced AAC+ Audio"
				1703	default y
				1704	help
				1705	Provides Enhanced AAC+ decoding
				1706
				1707	config SURF_FFA_GPIO_KEYPAD
				1708	bool "MSM SURF/FFA GPIO keypad"
				1709	depends on INPUT_GPIO = "y"
				1710	default y
				1711	help
				1712	Select if the GPIO keypad is attached.
				1713
				1714	config MSM_SLEEP_TIME_OVERRIDE
				1715	bool "Allow overriding suspend/sleep time with PM module parameter"
				1716	default y
				1717	help
				1718	Enable the module parameter sleep_time_override. Specified
				1719	in units of seconds, it overwrites the normal sleep time of
				1720	suspend. The feature is required for automated power management
				1721	testing.
				1722
				1723	config MSM_MEMORY_LOW_POWER_MODE
				1724	bool "Control the low power modes of memory"
				1725	default n
				1726	help
				1727	The application processor controls whether memory should enter
				1728	which low power mode.
				1729
				1730	choice
				1731	prompt "Default Memory Low Power Mode during Idle"
				1732	depends on MSM_MEMORY_LOW_POWER_MODE
				1733	default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
				1734	help
				1735	Selects the default low power mode of the memory during idle
				1736	sleep.
				1737
				1738	config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
				1739	bool "Memory active"
				1740
				1741	config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
				1742	bool "Memory in retention"
				1743
				1744	config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
				1745	bool "Memory in deep power down"
				1746	endchoice
				1747
				1748	choice
				1749	prompt "Default Memory Low Power Mode during Suspend"
				1750	depends on MSM_MEMORY_LOW_POWER_MODE
				1751	default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
				1752	help
				1753	Selects the default low power mode of the memory during suspend
				1754	sleep.
				1755
				1756	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
				1757	bool "Memory active"
				1758
				1759	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
				1760	bool "Memory in retention"
				1761
				1762	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
				1763	bool "Memory in deep power down"
				1764	endchoice
				1765
				1766	choice
				1767	prompt "Power management timeout action"
				1768	default MSM_PM_TIMEOUT_HALT
				1769	help
				1770	Selects the Application Processor's action when Power Management
				1771	times out waiting for Modem's handshake.
				1772
				1773	config MSM_PM_TIMEOUT_HALT
				1774	bool "Halt the Application Processor"
				1775
				1776	config MSM_PM_TIMEOUT_RESET_MODEM
				1777	bool "Reset the Modem Processor"
				1778
				1779	config MSM_PM_TIMEOUT_RESET_CHIP
				1780	bool "Reset the entire chip"
				1781	endchoice
				1782
				1783	config MSM_IDLE_WAIT_ON_MODEM
				1784	int "Wait for Modem to become ready for idle power collapse"
				1785	default 0
				1786	help
				1787	If Modem is not ready to handle Application Processor's request
				1788	for idle power collapse, wait the number of microseconds in case
				1789	Modem becomes ready soon.
				1790
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	1791	config MSM_RPM_REGULATOR
				1792	bool "RPM regulator driver"
Matt Wagantall	32dc71e	2012-01-04 11:13:11 -0800	[diff] [blame]	1793	depends on MSM_RPM && REGULATOR
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	1794	help
				1795	Compile in support for the RPM regulator driver, used for setting
				1796	voltages and other parameters of the various power rails supplied
				1797	by some Qualcomm PMICs.
				1798
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1799	config MSM_PIL
				1800	bool "Peripheral image loading"
				1801	select FW_LOADER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1802	default n
				1803	help
				1804	Some peripherals need to be loaded into memory before they can be
				1805	brought out of reset.
				1806
				1807	Say yes to support these devices.
				1808
Stephen Boyd	4eb885b	2011-09-29 01:16:03 -0700	[diff] [blame]	1809	config MSM_PIL_MODEM
				1810	tristate "Modem (ARM11) Boot Support"
				1811	depends on MSM_PIL
				1812	help
				1813	Support for booting and shutting down ARM11 Modem processors.
				1814
Stephen Boyd	3acc9e4	2011-09-28 16:46:40 -0700	[diff] [blame]	1815	config MSM_PIL_QDSP6V3
				1816	tristate "QDSP6v3 (Hexagon) Boot Support"
				1817	depends on MSM_PIL
				1818	help
				1819	Support for booting and shutting down QDSP6v3 processors (hexagon).
				1820	The QDSP6 is a low power DSP used in audio software applications.
				1821
Stephen Boyd	eb81988	2011-08-29 14:46:30 -0700	[diff] [blame]	1822	config MSM_PIL_QDSP6V4
				1823	tristate "QDSP6v4 (Hexagon) Boot Support"
				1824	depends on MSM_PIL
				1825	help
				1826	Support for booting and shutting down QDSP6v4 processors (hexagon).
				1827	The QDSP6 is a low power DSP used in audio, modem firmware, and modem
				1828	software applications.
				1829
Matt Wagantall	c2bbdc3	2012-03-21 19:44:50 -0700	[diff] [blame]	1830	config MSM_PIL_LPASS_QDSP6V5
				1831	tristate "LPASS QDSP6v5 (Hexagon) Boot Support"
				1832	depends on MSM_PIL
				1833	help
				1834	Support for booting and shutting down QDSP6v5 processors (Hexagon)
				1835	processors in low power audio subsystems.
				1836
Stephen Boyd	322a992	2011-09-20 01:05:54 -0700	[diff] [blame]	1837	config MSM_PIL_RIVA
				1838	tristate "RIVA (WCNSS) Boot Support"
				1839	depends on MSM_PIL
				1840	help
				1841	Support for booting and shutting down the RIVA processor (WCNSS).
				1842	Riva is the wireless subsystem processor used in bluetooth, wireless
				1843	LAN, and FM software applications.
				1844
Stephen Boyd	d89eebe	2011-09-28 23:28:11 -0700	[diff] [blame]	1845	config MSM_PIL_TZAPPS
				1846	tristate "TZApps Boot Support"
				1847	depends on MSM_PIL
				1848	help
				1849	Support for booting and shutting down TZApps.
				1850
				1851	TZApps is an image that runs in the secure processor state. It is
				1852	used to decrypt data and perform secure operations on the behalf of
				1853	the kernel.
				1854
Stephen Boyd	25c4a0b	2011-09-20 00:12:36 -0700	[diff] [blame]	1855	config MSM_PIL_DSPS
				1856	tristate "DSPS Boot Support"
				1857	depends on MSM_PIL
				1858	help
				1859	Support for booting and shutting down ARM7 DSPS processors.
				1860
				1861	DSPS is a sensors offloading processor used for applications such
				1862	as rotation detection, temperature, etc.
				1863
Stephen Boyd	7b973de	2012-03-09 12:26:16 -0800	[diff] [blame]	1864	config MSM_PIL_VIDC
				1865	tristate "Video Core Secure Boot Support"
				1866	depends on MSM_PIL
				1867	help
				1868	Support for authenticating the video core image.
				1869
Matt Wagantall	292aace	2012-01-26 19:12:34 -0800	[diff] [blame]	1870	config MSM_PIL_GSS
				1871	tristate "GSS (Coretx A5) Boot Support"
				1872	depends on MSM_PIL
				1873	help
				1874	Support for booting and shutting down Cortex A5 processors which run
				1875	GPS subsystem firmware.
				1876
Tianyi Gou	c1e049f8	2011-11-23 14:20:16 -0800	[diff] [blame]	1877	config MSM_PIL_PRONTO
				1878	tristate "PRONTO (WCNSS) Boot Support"
				1879	depends on MSM_PIL
				1880	help
				1881	Support for booting and shutting down the PRONTO processor (WCNSS).
				1882	PRONTO is the wireless subsystem processor used in bluetooth, wireless
				1883	LAN, and FM software applications.
				1884
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1885	config MSM_SCM
				1886	bool "Secure Channel Manager (SCM) support"
				1887	default n
				1888
				1889	config MSM_SUBSYSTEM_RESTART
				1890	bool "MSM Subsystem Restart Driver"
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1891	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1892	default n
				1893	help
				1894	This option enables the MSM subsystem restart driver, which provides
				1895	a framework to handle subsystem crashes.
				1896
Matt Wagantall	f802090	2011-08-30 21:19:23 -0700	[diff] [blame]	1897	config MSM_SYSMON_COMM
				1898	bool "MSM System Monitor communication support"
				1899	depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
				1900	default y
				1901	help
				1902	This option adds support for MSM System Monitor library, which
				1903	provides an API that may be used for notifying subsystems within
				1904	the SoC about other subsystems' power-up/down state-changes.
				1905
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1906	config MSM_MODEM_8960
				1907	bool "MSM 8960 Modem driver"
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1908	depends on (ARCH_MSM8960 \|\| ARCH_MSM9615)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1909	help
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1910	This option enables the modem driver for the MSM8960 and MSM9615, which monitors
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1911	modem hardware watchdog interrupt lines and plugs into the subsystem
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1912	restart and PIL drivers. For MSM9615, it only supports a full chip reset.
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1913
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1914	config MSM_LPASS_8960
				1915	tristate "MSM 8960 Lpass driver"
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1916	depends on (ARCH_MSM8960 \|\| ARCH_MSM9615)
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1917	help
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1918	This option enables the lpass driver for the MSM8960 and MSM9615. This monitors
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1919	lpass hardware watchdog interrupt lines and plugs into the subsystem
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1920	restart and PIL drivers. For MSM9615, it only supports a full chip reset.
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1921
Ankur Nandwani	e258cf0	2011-08-19 10:16:38 -0700	[diff] [blame]	1922	config MSM_WCNSS_SSR_8960
				1923	tristate "MSM 8960 WCNSS restart module"
				1924	depends on (ARCH_MSM8960)
				1925	help
				1926	This option enables the WCNSS restart module for MSM8960, which
				1927	monitors WCNSS hardware watchdog interrupt lines and plugs WCNSS
				1928	into the subsystem restart framework.
				1929
Rohit Vaswani	d0fb418	2012-03-19 18:07:59 -0700	[diff] [blame]	1930	config MSM_GSS_SSR_8064
				1931	bool "MSM 8064 GSS restart driver"
				1932	depends on (ARCH_APQ8064)
				1933	help
				1934	This option enables the gps subsystem restart driver for APQ8064, which monitors
				1935	gss hardware watchdog interrupt lines and plugs into the subsystem
				1936	restart and PIL drivers.
				1937
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1938	config SCORPION_Uni_45nm_BUG
				1939	bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
				1940	depends on ARCH_MSM7X30 \|\| (ARCH_QSD8X50 && MSM_SOC_REV_A)
				1941	default y
				1942	help
				1943	Invalidating the Instruction Cache by Modified Virtual Address to PoU and
				1944	invalidating the Branch Predictor Array by Modified Virtual Address can
				1945	create invalid entries in the TLB with the wrong ASID values on Scorpion
				1946	Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
				1947	workaround for Scorpion Uniprocessor 45nm cores.
				1948
				1949	This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
				1950
Harini Jayaraman	ef7805f	2011-09-28 12:45:31 -0600	[diff] [blame]	1951	config MSM_BUSPM_DEV
				1952	tristate "MSM Bus Performance Monitor Kernel Module"
				1953	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				1954	default m
				1955	help
				1956	This kernel module is used to mmap() hardware registers for the
				1957	performance monitors, counters, etc. The module can also be used to
				1958	allocate physical memory which is used by bus performance hardware to
				1959	dump performance data.
				1960
Mona Hossain	11c03ac	2011-10-26 12:42:10 -0700	[diff] [blame]	1961	config MSM_TZ_LOG
				1962	tristate "MSM Trust Zone (TZ) Log Driver"
				1963	depends on DEBUG_FS
				1964	help
				1965	This option enables a driver with a debugfs interface for messages
				1966	produced by the Secure code (Trust zone). These messages provide
				1967	diagnostic information about TZ operation.
				1968
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1969	config MSM_RPM_LOG
				1970	tristate "MSM Resource Power Manager Log Driver"
				1971	depends on DEBUG_FS
Praveen Chidambaram	7a71223	2011-10-28 13:39:45 -0600	[diff] [blame]	1972	depends on MSM_RPM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1973	default n
				1974	help
				1975	This option enables a driver which can read from a circular buffer
				1976	of messages produced by the RPM. These messages provide diagnostic
				1977	information about RPM operation. The driver outputs the messages
				1978	via a debugfs node.
				1979
				1980	config MSM_RPM_STATS_LOG
				1981	tristate "MSM Resource Power Manager Stat Driver"
				1982	depends on DEBUG_FS
Praveen Chidambaram	7a71223	2011-10-28 13:39:45 -0600	[diff] [blame]	1983	depends on MSM_RPM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1984	default n
				1985	help
				1986	This option enables a driver which reads RPM messages from a shared
				1987	memory location. These messages provide statistical information about
				1988	the low power modes that RPM enters. The drivers outputs the message
				1989	via a debugfs node.
				1990
				1991	config MSM_IOMMU
				1992	bool "MSM IOMMU Support"
Joel King	41d594e	2011-10-14 13:18:20 -0700	[diff] [blame]	1993	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_APQ8064
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1994	select IOMMU_API
				1995	default n
				1996	help
				1997	Support for the IOMMUs found on certain Qualcomm SOCs.
				1998	These IOMMUs allow virtualization of the address space used by most
				1999	cores within the multimedia subsystem.
				2000
				2001	If unsure, say N here.
				2002
				2003	config IOMMU_PGTABLES_L2
				2004	bool "Allow SMMU page tables in the L2 cache (Experimental)"
				2005	depends on MSM_IOMMU=y
				2006	depends on MMU
				2007	depends on CPU_DCACHE_DISABLE=n
				2008	depends on SMP
				2009	default y
				2010	help
				2011	Improves TLB miss latency at the expense of potential L2 pollution.
				2012	However, with large multimedia buffers, the TLB should mostly contain
				2013	section mappings and TLB misses should be quite infrequent.
				2014	Most people can probably say Y here.
				2015
				2016	config MSM_DIRECT_SCLK_ACCESS
				2017	bool "Direct access to the SCLK timer"
				2018	default n
				2019
				2020	config IOMMU_API
				2021	bool
Brian Swetland	2eb44eb	2008-09-29 16:00:48 -0700	[diff] [blame]	2022
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	2023	config MSM_GPIOMUX
				2024	bool
				2025
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	2026	config MSM_V2_TLMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2027	bool
				2028
				2029	config FSM9XXX_TLMM
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	2030	bool
Stepan Moskovchenko	0ab84745	2010-11-12 19:29:57 -0800	[diff] [blame]	2031
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2032	config MSM_SECURE_IO
Stepan Moskovchenko	0ab84745	2010-11-12 19:29:57 -0800	[diff] [blame]	2033	bool
Stephen Boyd	2a1eb58	2010-08-27 10:01:23 -0700	[diff] [blame]	2034
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2035	config MSM_NATIVE_RESTART
Stephen Boyd	2a1eb58	2010-08-27 10:01:23 -0700	[diff] [blame]	2036	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2037
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	2038	config MSM_PM2
				2039	depends on PM
				2040	bool
				2041
				2042	config MSM_PM8X60
				2043	depends on PM
				2044	bool
				2045
				2046	config MSM_NOPM
				2047	default y if !PM
				2048	bool
				2049
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2050	config MSM_BUS_SCALING
				2051	bool "Bus scaling driver"
				2052	default n
				2053
Gagan Mac	85c7049	2011-06-10 16:07:47 -0600	[diff] [blame]	2054	config MSM_BUS_RPM_MULTI_TIER_ENABLED
				2055	bool "RPM Multi-tiering Configuration"
				2056	depends on MSM_BUS_SCALING
				2057
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2058	config MSM_WATCHDOG
				2059	bool "MSM Watchdog Support"
Rohit Vaswani	e897f84	2012-03-19 14:19:34 -0700	[diff] [blame]	2060	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615 \|\| ARCH_FSM9XXX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2061	help
				2062	This enables the watchdog as is present on 8x60. Currently we use
				2063	core 0's watchdog, and reset the entire SoC if it times out. It does
				2064	not run during the bootup process, so it will not catch any early
				2065	lockups.
				2066
				2067	config MSM_DLOAD_MODE
				2068	bool "Enable download mode on crashes"
Rohit Vaswani	92b071a	2011-10-18 20:10:09 -0700	[diff] [blame]	2069	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2070	default n
				2071	help
				2072	This makes the SoC enter download mode when it resets
				2073	due to a kernel panic. Note that this doesn't by itself
				2074	make the kernel reboot on a kernel panic - that must be
				2075	enabled via another mechanism.
				2076
Pratik Patel	17f3b82	2011-11-21 12:41:47 -0800	[diff] [blame]	2077	config MSM_JTAG
				2078	bool "JTAG debug and trace support"
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	2079	help
Pratik Patel	17f3b82	2011-11-21 12:41:47 -0800	[diff] [blame]	2080	Add additional support for JTAG kernel debugging and tracing.
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	2081
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2082	config MSM_ETM
				2083	tristate "Enable MSM ETM and ETB"
Pratik Patel	17f3b82	2011-11-21 12:41:47 -0800	[diff] [blame]	2084	depends on ARCH_MSM8X60
				2085	select MSM_JTAG
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2086	help
Pratik Patel	17f3b82	2011-11-21 12:41:47 -0800	[diff] [blame]	2087	Enables embedded trace collection on MSM8660
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	2088
				2089	config MSM_QDSS
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	2090	bool "Qualcomm Debug Subsystem"
Pratik Patel	17f3b82	2011-11-21 12:41:47 -0800	[diff] [blame]	2091	select MSM_JTAG
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	2092	help
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	2093	Enables support for Qualcomm Debug Subsystem.
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2094
Pratik Patel	29cba15	2012-01-03 11:40:26 -0800	[diff] [blame]	2095	config MSM_QDSS_ETM_DEFAULT_ENABLE
				2096	bool "Turn on QDSS ETM Tracing by Default"
				2097	depends on MSM_QDSS
				2098	help
				2099	Turns on QDSS ETM tracing by default. Otherwise, tracing is
				2100	disabled by default but can be enabled by other means.
				2101
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2102	config MSM_SLEEP_STATS
				2103	bool "Enable exporting of MSM sleep stats to userspace"
				2104	depends on CPU_IDLE
				2105	default n
				2106
Lynus Vaz	dde09ee	2012-01-05 13:28:22 +0530	[diff] [blame]	2107	config MSM_SLEEP_STATS_DEVICE
				2108	bool "Enable exporting of MSM sleep device stats to userspace"
				2109
Krishna Vanka	7f563ff	2012-03-20 22:04:19 +0530	[diff] [blame]	2110	config MSM_RUN_QUEUE_STATS
				2111	bool "Enable collection and exporting of MSM Run Queue stats to userspace"
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	2112	depends on (MSM_SOC_REV_A \|\| ARCH_MSM8X60 \|\| ARCH_MSM8960)
				2113	help
				2114	This option enalbes statistics collection on Run Queue. A daemon
				2115	in user mode, called MPDecision will be using this data to decide
				2116	on when to switch off/on the other cores.
Krishna Vanka	7f563ff	2012-03-20 22:04:19 +0530	[diff] [blame]	2117
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2118	config MSM_STANDALONE_POWER_COLLAPSE
				2119	bool "Enable standalone power collapse"
				2120	default n
				2121
				2122	config MSM_GSBI9_UART
				2123	bool "Enable GSBI9 UART device"
				2124	default n
				2125	help
				2126	This enables GSBI9 configured into UART.
				2127
				2128	config MSM_SHARED_GPIO_FOR_UART2DM
				2129	bool "Use shared GPIOs into UART mode"
				2130	depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
				2131	help
				2132	This option configures GPIO muxed with SDC4/MMC3
				2133	8-bit mode into UART mode. It is used for serial
				2134	console on UART2DM. Say Y if you want to have
				2135	serial console on UART2DM.
				2136
				2137	config MSM_SHOW_RESUME_IRQ
				2138	bool "Enable logging of interrupts that could have caused resume"
Bryan Huntsman	cc14703	2011-11-23 13:03:56 -0800	[diff] [blame]	2139	depends on (ARM_GIC \|\| PMIC8058)
				2140	default y if PMIC8058
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2141	default n
				2142	help
				2143	This option logs wake up interrupts that have triggered just before
				2144	the resume loop unrolls. Say Y if you want to debug why the system
				2145	resumed.
				2146
				2147	config BT_MSM_PINTEST
				2148	tristate "MSM Bluetooth Pin Connectivity Test"
				2149	depends on ((ARCH_MSM8X60 \|\| ARCH_MSM7X27A) && DEBUG_FS)
				2150	default n
				2151	help
				2152	Bluetooth MSM Pin Connectivity test module.
				2153	This driver provides support for verifying the MSM to BT pin
				2154	connectivity.
				2155
				2156	config MSM_FAKE_BATTERY
				2157	depends on POWER_SUPPLY
				2158	default n
				2159	bool "MSM Fake Battery"
				2160	help
				2161	Enables MSM fake battery driver.
				2162
				2163	config MSM_QDSP6_APR
				2164	bool "Audio QDSP6 APR support"
				2165	depends on MSM_SMD
				2166	default n
				2167	help
				2168	Enable APR IPC protocol support between
				2169	application processor and QDSP6. APR is
				2170	used by audio driver to configure QDSP6's
				2171	ASM, ADM and AFE.
				2172
				2173
				2174	config MSM_AUDIO_QDSP6
				2175	bool "QDSP6 HW Audio support"
				2176	select SND_SOC_MSM_QDSP6_INTF
				2177	default n
				2178	help
				2179	Enable HW audio support in QDSP6.
				2180	QDSP6 can support HW encoder & decoder and audio processing
				2181
Baruch Eruchimovitch	e9cbfc1	2011-10-09 19:47:08 +0200	[diff] [blame]	2182	config MSM_ULTRASOUND
				2183	bool "MSM ultrasound support"
				2184	depends on MSM_AUDIO_QDSP6
				2185	help
				2186	Enable support for qdsp6/ultrasound.
				2187
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2188	config MSM_RPC_VIBRATOR
				2189	bool "RPC based MSM Vibrator Support"
				2190	depends on MSM_ONCRPCROUTER
				2191	help
				2192	Enable the vibrator support on MSM over RPC. The vibrator
				2193	is connected on the PMIC. Say Y if you want to enable this
				2194	feature.
				2195
				2196	config PM8XXX_RPC_VIBRATOR
				2197	bool "RPC based Vibrator on PM8xxx PMICs"
				2198	depends on MSM_RPC_VIBRATOR
				2199	help
				2200	Enable the vibrator support on MSM over RPC. The vibrator
				2201	is connected on the PM8XXX PMIC. Say Y if you want to enable
				2202	this feature.
				2203
				2204	config MSM_SPM_V1
				2205	bool "Driver support for SPM Version 1"
				2206	help
				2207	Enables the support for Version 1 of the SPM driver. SPM hardware is
				2208	used to manage the processor power during sleep. The driver allows
				2209	configuring SPM to allow different power modes.
				2210
				2211	config MSM_SPM_V2
				2212	bool "Driver support for SPM Version 2"
				2213	help
				2214	Enables the support for Version 2 of the SPM driver. SPM hardware is
				2215	used to manage the processor power during sleep. The driver allows
				2216	configuring SPM to allow different power modes.
				2217
				2218	config MSM_L2_SPM
				2219	bool "SPM support for L2 cache"
				2220	depends on MSM_SPM_V2
				2221	help
				2222	Enable SPM driver support for L2 cache. Some MSM chipsets allow
				2223	control of L2 cache low power mode with a Subsystem Power manager.
				2224	Enabling this driver allows configuring L2 SPM for low power modes
				2225	on supported chipsets.
				2226
Laura Abbott	2d1760b	2011-09-29 21:31:24 -0700	[diff] [blame]	2227	config MSM_MULTIMEDIA_USE_ION
				2228	bool "Multimedia suport using Ion"
				2229	depends on ION_MSM
				2230	help
				2231	Enable support for multimedia drivers using Ion for buffer management
				2232	instead of pmem. Selecting this may also involve userspace
				2233	dependencies as well.
				2234
Naveen Ramaraj	51f5e8b	2012-04-09 15:58:40 -0700	[diff] [blame]	2235	config MSM_OCMEM
				2236	bool "MSM On-Chip memory driver (OCMEM)"
				2237	help
				2238	Enable support for On-Chip Memory available on certain MSM chipsets.
				2239	OCMEM is a low latency, high performance pool shared by subsystems.
				2240
Laura Abbott	ad340ff	2012-01-04 14:23:48 -0800	[diff] [blame]	2241	config MSM_RTB
				2242	bool "Register tracing"
				2243	help
				2244	Add support for logging different events to a small uncached
				2245	region. This is designed to aid in debugging reset cases where the
				2246	caches may not be flushed before the target resets.
				2247
				2248	config MSM_RTB_SEPARATE_CPUS
				2249	bool "Separate entries for each cpu"
				2250	depends on MSM_RTB
Laura Abbott	9959f98	2012-02-28 11:30:50 -0800	[diff] [blame]	2251	depends on SMP
Laura Abbott	ad340ff	2012-01-04 14:23:48 -0800	[diff] [blame]	2252	help
				2253	Under some circumstances, it may be beneficial to give dedicated space
				2254	for each cpu to log accesses. Selecting this option will log each cpu
				2255	separately. This will guarantee that the last acesses for each cpu
				2256	will be logged but there will be fewer entries per cpu
				2257
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2258	config MSM_CACHE_ERP
				2259	bool "Cache / CPU error reporting"
				2260	depends on ARCH_MSM_KRAIT
				2261	help
				2262	Say 'Y' here to enable reporting of cache and TLB errors to the kernel
				2263	log. Enabling this feature can be used as a system debugging technique
				2264	if cache corruption is suspected. Cache error statistics will also be
				2265	reported in /proc/cpu/msm_cache_erp.
				2266
				2267	For production builds, you should probably say 'N' here.
				2268
				2269	config MSM_L1_ERR_PANIC
Stepan Moskovchenko	1b0c174	2012-04-30 14:53:16 -0700	[diff] [blame]	2270	bool "Panic on L1 cache errors"
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2271	depends on MSM_CACHE_ERP
				2272	help
Stepan Moskovchenko	1b0c174	2012-04-30 14:53:16 -0700	[diff] [blame]	2273	To cause the kernel to panic whenever an L1 cache error is detected, say
				2274	'Y' here. This may be useful as a debugging technique if general system
				2275	instability is suspected.
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2276
				2277	For production builds, you should probably say 'N' here.
				2278
Stepan Moskovchenko	e9a5dc1	2012-04-03 20:25:49 -0700	[diff] [blame]	2279	config MSM_L2_ERP_PRINT_ACCESS_ERRORS
				2280	bool "Report L2 master port slave/decode errors in kernel log"
				2281	depends on MSM_CACHE_ERP
				2282	help
				2283	Master port errors can occur when a memory request is not properly
				2284	handled by the destination slave. This can occur if the destination
				2285	register does not exist or is inaccessible due to security
				2286	restrictions or (in some cases) clock configuration. Enabling this
				2287	option will cause a backtrace to be printed to the kernel log whenever
				2288	such an error is encountered. Note that the error is reported as an
				2289	interrupt rather than as an exception, meaning that the backtrace may
				2290	have some skid. This option may help with debugging, though production
				2291	builds should probably say 'N' here.
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2292
				2293	config MSM_L2_ERP_PORT_PANIC
				2294	bool "Panic on L2 master port errors"
Stepan Moskovchenko	e9a5dc1	2012-04-03 20:25:49 -0700	[diff] [blame]	2295	depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2296	help
				2297	Master port errors can occur when a memory request is not properly
				2298	handled by the destination slave. Enable this option to catch drivers
				2299	which attempt to access bad areas of the address space, or access
				2300	hardware registers in an improper state (such as certain clocks not
				2301	being on). This option may help with debugging, though production
				2302	builds should probably say 'N' here.
				2303
				2304	config MSM_L2_ERP_1BIT_PANIC
				2305	bool "Panic on recoverable L2 soft errors"
				2306	depends on MSM_CACHE_ERP
				2307	help
				2308	Enable this option to cause a kernel panic whenever the L2 cache
				2309	encounters a single-bit (correctable) soft error. This option should
				2310	only be enabled when doing low-level debugging where cache corruption
				2311	is suspected.
				2312
				2313	For production builds, you should definitely say 'N' here.
				2314
				2315	config MSM_L2_ERP_2BIT_PANIC
				2316	bool "Panic on unrecoverable L2 soft errors"
				2317	depends on MSM_CACHE_ERP
				2318	help
				2319	Enable this option to cause a kernel panic whenever the L2 cache
				2320	encounters a double-bit (non-correctable) soft error. Debug builds
				2321	will likely benefit from having this option enabled to catch cache
				2322	problems as soon as possible.
				2323
				2324	For production builds, it may be acceptable to say 'N' here, since
				2325	an uncorrectable error might not necessarily cause further problems.
Laura Abbott	ad340ff	2012-01-04 14:23:48 -0800	[diff] [blame]	2326
Praveen Chidambaram	f53ef1b	2011-12-06 08:27:49 -0700	[diff] [blame]	2327	config MSM_DCVS
				2328	bool "Use MSM DCVS for CPU/GPU Frequency control"
				2329	depends on MSM_SCM
				2330	help
				2331	Enable support for MSM DCVS to control all CPU and GPU core frequencies.
				2332	The DCVS manager allows idle driver to feed the idle information to the
				2333	algorithm and the algorithm returns a frequency for the core which is
				2334	passed to the frequency change driver.
				2335
Taniya Das	c43e687	2012-03-21 16:41:14 +0530	[diff] [blame]	2336	config HAVE_ARCH_HAS_CURRENT_TIMER
				2337	bool
Laura Abbott	306bcc2	2012-03-08 11:24:53 -0800	[diff] [blame]	2338
				2339	config MSM_CACHE_DUMP
				2340	bool "Cache dumping support"
				2341	help
				2342	Add infrastructure to dump the L1 and L2 caches to an allocated buffer.
				2343	This allows for analysis of the caches in case cache corruption is
				2344	suspected.
				2345
Laura Abbott	7b63736	2012-03-29 16:43:49 -0700	[diff] [blame]	2346	config MSM_CACHE_DUMP_ON_PANIC
				2347	bool "Dump caches on panic"
				2348	depends on MSM_CACHE_DUMP
				2349	help
				2350	By default, the caches are flushed on panic. This means that trying to
				2351	look at them in a RAM dump will give useless data. Select this if you
				2352	want to dump the L1 and L2 caches on panic before any flush occurs.
				2353	If unsure, say N
				2354
Jack Pham	ccbbfab	2012-04-09 19:50:20 -0700	[diff] [blame]	2355	config MSM_HSIC_SYSMON
				2356	tristate "MSM HSIC system monitor driver"
				2357	depends on USB
				2358	help
				2359	Add support for bridging with the system monitor interface of MDM
				2360	over HSIC. This driver allows the local system monitor to
				2361	communicate with the remote system monitor interface.
				2362
				2363	config MSM_HSIC_SYSMON_TEST
				2364	tristate "MSM HSIC system monitor bridge test"
				2365	depends on USB && MSM_HSIC_SYSMON && DEBUG_FS
				2366	help
				2367	Enable the test hook for the Qualcomm system monitor HSIC driver.
				2368	This will create a debugfs file entry named "hsic_sysmon_test" which
				2369	can be read and written to send character data to the sysmon port of
				2370	the modem over USB.
				2371
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	2372	endif