blob: 702eb933cf88bc9414ccbcb85e74de2dcfc18b08 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
6
Antonino A. Daplasba707102006-06-26 00:26:37 -07007config FIRMWARE_EDID
8 bool "Enable firmware EDID"
9 default y
10 ---help---
11 This enables access to the EDID transferred from the firmware.
12 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
13 transfers do not work for your driver and if you are using
14 nvidiafb, i810fb or savagefb.
15
16 In general, choosing Y for this option is safe. If you
17 experience extremely long delays while booting before you get
18 something on your display, try setting this to N. Matrox cards in
19 combination with certain motherboards and monitors are known to
20 suffer from this problem.
21
Linus Torvalds1da177e2005-04-16 15:20:36 -070022config FB
23 tristate "Support for frame buffer devices"
24 ---help---
25 The frame buffer device provides an abstraction for the graphics
26 hardware. It represents the frame buffer of some video hardware and
27 allows application software to access the graphics hardware through
28 a well-defined interface, so the software doesn't need to know
29 anything about the low-level (hardware register) stuff.
30
31 Frame buffer devices work identically across the different
32 architectures supported by Linux and make the implementation of
33 application programs easier and more portable; at this point, an X
34 server exists which uses the frame buffer device exclusively.
35 On several non-X86 architectures, the frame buffer device is the
36 only way to use the graphics hardware.
37
38 The device is accessed through special device nodes, usually located
39 in the /dev directory, i.e. /dev/fb*.
40
41 You need an utility program called fbset to make full use of frame
42 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
43 and the Framebuffer-HOWTO at
44 <http://www.tahallah.demon.co.uk/programming/prog.html> for more
45 information.
46
47 Say Y here and to the driver for your graphics board below if you
48 are compiling a kernel for a non-x86 architecture.
49
50 If you are compiling for the x86 architecture, you can say Y if you
51 want to play with it, but it is not essential. Please note that
52 running graphical applications that directly touch the hardware
53 (e.g. an accelerated X server) and that are not frame buffer
54 device-aware may cause unexpected results. If unsure, say N.
55
56config FB_CFB_FILLRECT
57 tristate
58 depends on FB
59 default n
60 ---help---
61 Include the cfb_fillrect function for generic software rectangle
62 filling. This is used by drivers that don't provide their own
63 (accelerated) version.
64
65config FB_CFB_COPYAREA
66 tristate
67 depends on FB
68 default n
69 ---help---
70 Include the cfb_copyarea function for generic software area copying.
71 This is used by drivers that don't provide their own (accelerated)
72 version.
73
74config FB_CFB_IMAGEBLIT
75 tristate
76 depends on FB
77 default n
78 ---help---
79 Include the cfb_imageblit function for generic software image
80 blitting. This is used by drivers that don't provide their own
81 (accelerated) version.
82
Linus Torvalds1da177e2005-04-16 15:20:36 -070083config FB_MACMODES
84 tristate
85 depends on FB
86 default n
87
Michael Hanselmann5474c122006-06-25 05:47:08 -070088config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -070089 bool
90 depends on FB
91 select BACKLIGHT_LCD_SUPPORT
92 select BACKLIGHT_CLASS_DEVICE
93 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -070094
Linus Torvalds1da177e2005-04-16 15:20:36 -070095config FB_MODE_HELPERS
96 bool "Enable Video Mode Handling Helpers"
97 depends on FB
98 default n
99 ---help---
100 This enables functions for handling video modes using the
101 Generalized Timing Formula and the EDID parser. A few drivers rely
102 on this feature such as the radeonfb, rivafb, and the i810fb. If
103 your driver does not take advantage of this feature, choosing Y will
104 just increase the kernel size by about 5K.
105
106config FB_TILEBLITTING
107 bool "Enable Tile Blitting Support"
108 depends on FB
109 default n
110 ---help---
111 This enables tile blitting. Tile blitting is a drawing technique
112 where the screen is divided into rectangular sections (tiles), whereas
113 the standard blitting divides the screen into pixels. Because the
114 default drawing element is a tile, drawing functions will be passed
115 parameters in terms of number of tiles instead of number of pixels.
116 For example, to draw a single character, instead of using bitmaps,
117 an index to an array of bitmaps will be used. To clear or move a
118 rectangular section of a screen, the rectangle will be described in
119 terms of number of tiles in the x- and y-axis.
120
121 This is particularly important to one driver, matroxfb. If
122 unsure, say N.
123
124config FB_CIRRUS
125 tristate "Cirrus Logic support"
126 depends on FB && (ZORRO || PCI)
127 select FB_CFB_FILLRECT
128 select FB_CFB_COPYAREA
129 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130 ---help---
131 This enables support for Cirrus Logic GD542x/543x based boards on
132 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
133
134 If you have a PCI-based system, this enables support for these
135 chips: GD-543x, GD-544x, GD-5480.
136
137 Please read the file <file:Documentation/fb/cirrusfb.txt>.
138
139 Say N unless you have such a graphics board or plan to get one
140 before you next recompile the kernel.
141
142config FB_PM2
143 tristate "Permedia2 support"
144 depends on FB && ((AMIGA && BROKEN) || PCI)
145 select FB_CFB_FILLRECT
146 select FB_CFB_COPYAREA
147 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148 help
149 This is the frame buffer device driver for the Permedia2 AGP frame
150 buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
151 product page at
152 <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
153
154config FB_PM2_FIFO_DISCONNECT
155 bool "enable FIFO disconnect feature"
156 depends on FB_PM2 && PCI
157 help
158 Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
159
160config FB_ARMCLCD
161 tristate "ARM PrimeCell PL110 support"
162 depends on FB && ARM && ARM_AMBA
163 select FB_CFB_FILLRECT
164 select FB_CFB_COPYAREA
165 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166 help
167 This framebuffer device driver is for the ARM PrimeCell PL110
168 Colour LCD controller. ARM PrimeCells provide the building
169 blocks for System on a Chip devices.
170
171 If you want to compile this as a module (=code which can be
172 inserted into and removed from the running kernel), say M
173 here and read <file:Documentation/modules.txt>. The module
174 will be called amba-clcd.
175
Marc Singer903e2bb2006-05-16 11:41:30 +0100176choice
177
178 depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
179 prompt "LCD Panel"
180 default FB_ARMCLCD_SHARP_LQ035Q7DB02
181
182config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
183 bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
184 help
185 This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
186 color QVGA, HRTFT panel. The LogicPD device includes an
187 an integrated HRTFT controller IC.
188 The native resolution is 240x320.
189
190config FB_ARMCLCD_SHARP_LQ057Q3DC02
191 bool "LogicPD LCD 5.7\" QVGA"
192 help
193 This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
194 color QVGA, TFT panel. The LogicPD device includes an
195 The native resolution is 320x240.
196
197config FB_ARMCLCD_SHARP_LQ64D343
198 bool "LogicPD LCD 6.4\" VGA"
199 help
200 This is an implementation of the Sharp LQ64D343, a 6.4"
201 color VGA, TFT panel. The LogicPD device includes an
202 The native resolution is 640x480.
203
204config FB_ARMCLCD_SHARP_LQ10D368
205 bool "LogicPD LCD 10.4\" VGA"
206 help
207 This is an implementation of the Sharp LQ10D368, a 10.4"
208 color VGA, TFT panel. The LogicPD device includes an
209 The native resolution is 640x480.
210
211
212config FB_ARMCLCD_SHARP_LQ121S1DG41
213 bool "LogicPD LCD 12.1\" SVGA"
214 help
215 This is an implementation of the Sharp LQ121S1DG41, a 12.1"
216 color SVGA, TFT panel. The LogicPD device includes an
217 The native resolution is 800x600.
218
219 This panel requires a clock rate may be an integer fraction
220 of the base LCDCLK frequency. The driver will select the
221 highest frequency available that is lower than the maximum
222 allowed. The panel may flicker if the clock rate is
223 slower than the recommended minimum.
224
225config FB_ARMCLCD_AUO_A070VW01_WIDE
226 bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
227 help
228 This is an implementation of the AU Optronics, a 7.0"
229 WIDE Color. The native resolution is 234x480.
230
231config FB_ARMCLCD_HITACHI
232 bool "Hitachi Wide Screen 800x480"
233 help
234 This is an implementation of the Hitachi 800x480.
235
236endchoice
237
238
Linus Torvalds1da177e2005-04-16 15:20:36 -0700239config FB_ACORN
240 bool "Acorn VIDC support"
241 depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
242 select FB_CFB_FILLRECT
243 select FB_CFB_COPYAREA
244 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245 help
246 This is the frame buffer device driver for the Acorn VIDC graphics
247 hardware found in Acorn RISC PCs and other ARM-based machines. If
248 unsure, say N.
249
250config FB_CLPS711X
251 bool "CLPS711X LCD support"
252 depends on (FB = y) && ARM && ARCH_CLPS711X
253 select FB_CFB_FILLRECT
254 select FB_CFB_COPYAREA
255 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800256 help
257 Say Y to enable the Framebuffer driver for the CLPS7111 and
258 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700259
260config FB_SA1100
261 bool "SA-1100 LCD support"
262 depends on (FB = y) && ARM && ARCH_SA1100
263 select FB_CFB_FILLRECT
264 select FB_CFB_COPYAREA
265 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266 help
267 This is a framebuffer device for the SA-1100 LCD Controller.
268 See <http://www.linux-fbdev.org/> for information on framebuffer
269 devices.
270
271 If you plan to use the LCD display with your SA-1100 system, say
272 Y here.
273
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700274config FB_IMX
275 tristate "Motorola i.MX LCD support"
276 depends on FB && ARM && ARCH_IMX
277 select FB_CFB_FILLRECT
278 select FB_CFB_COPYAREA
279 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700280
Linus Torvalds1da177e2005-04-16 15:20:36 -0700281config FB_CYBER2000
282 tristate "CyberPro 2000/2010/5000 support"
283 depends on FB && PCI && (BROKEN || !SPARC64)
284 select FB_CFB_FILLRECT
285 select FB_CFB_COPYAREA
286 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287 help
288 This enables support for the Integraphics CyberPro 20x0 and 5000
289 VGA chips used in the Rebel.com Netwinder and other machines.
290 Say Y if you have a NetWinder or a graphics card containing this
291 device, otherwise say N.
292
293config FB_APOLLO
294 bool
295 depends on (FB = y) && APOLLO
296 default y
297 select FB_CFB_FILLRECT
298 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299
300config FB_Q40
301 bool
302 depends on (FB = y) && Q40
303 default y
304 select FB_CFB_FILLRECT
305 select FB_CFB_COPYAREA
306 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307
308config FB_AMIGA
309 tristate "Amiga native chipset support"
310 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700311 help
312 This is the frame buffer device driver for the builtin graphics
313 chipset found in Amigas.
314
315 To compile this driver as a module, choose M here: the
316 module will be called amifb.
317
318config FB_AMIGA_OCS
319 bool "Amiga OCS chipset support"
320 depends on FB_AMIGA
321 help
322 This enables support for the original Agnus and Denise video chips,
323 found in the Amiga 1000 and most A500's and A2000's. If you intend
324 to run Linux on any of these systems, say Y; otherwise say N.
325
326config FB_AMIGA_ECS
327 bool "Amiga ECS chipset support"
328 depends on FB_AMIGA
329 help
330 This enables support for the Enhanced Chip Set, found in later
331 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
332 you intend to run Linux on any of these systems, say Y; otherwise
333 say N.
334
335config FB_AMIGA_AGA
336 bool "Amiga AGA chipset support"
337 depends on FB_AMIGA
338 help
339 This enables support for the Advanced Graphics Architecture (also
340 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
341 and CD32. If you intend to run Linux on any of these systems, say Y;
342 otherwise say N.
343
344config FB_CYBER
345 tristate "Amiga CyberVision 64 support"
346 depends on FB && ZORRO && BROKEN
347 select FB_CFB_FILLRECT
348 select FB_CFB_COPYAREA
349 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700350 help
351 This enables support for the Cybervision 64 graphics card from
352 Phase5. Please note that its use is not all that intuitive (i.e. if
353 you have any questions, be sure to ask!). Say N unless you have a
354 Cybervision 64 or plan to get one before you next recompile the
355 kernel. Please note that this driver DOES NOT support the
356 Cybervision 64/3D card, as they use incompatible video chips.
357
358config FB_VIRGE
359 bool "Amiga CyberVision 64/3D support "
360 depends on (FB = y) && ZORRO && BROKEN
361 select FB_CFB_FILLRECT
362 select FB_CFB_COPYAREA
363 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700364 help
365 This enables support for the Cybervision 64/3D graphics card from
366 Phase5. Please note that its use is not all that intuitive (i.e. if
367 you have any questions, be sure to ask!). Say N unless you have a
368 Cybervision 64/3D or plan to get one before you next recompile the
369 kernel. Please note that this driver DOES NOT support the older
370 Cybervision 64 card, as they use incompatible video chips.
371
372config FB_RETINAZ3
373 tristate "Amiga Retina Z3 support"
374 depends on (FB = y) && ZORRO && BROKEN
375 help
376 This enables support for the Retina Z3 graphics card. Say N unless
377 you have a Retina Z3 or plan to get one before you next recompile
378 the kernel.
379
380config FB_FM2
381 bool "Amiga FrameMaster II/Rainbow II support"
382 depends on (FB = y) && ZORRO
383 select FB_CFB_FILLRECT
384 select FB_CFB_COPYAREA
385 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386 help
387 This is the frame buffer device driver for the Amiga FrameMaster
388 card from BSC (exhibited 1992 but not shipped as a CBM product).
389
Jaya Kumar1154ea72005-06-21 17:17:04 -0700390config FB_ARC
391 tristate "Arc Monochrome LCD board support"
392 depends on FB && X86
393 select FB_CFB_FILLRECT
394 select FB_CFB_COPYAREA
395 select FB_CFB_IMAGEBLIT
Jaya Kumar1154ea72005-06-21 17:17:04 -0700396 help
397 This enables support for the Arc Monochrome LCD board. The board
398 is based on the KS-108 lcd controller and is typically a matrix
399 of 2*n chips. This driver was tested with a 128x64 panel. This
400 driver supports it for use with x86 SBCs through a 16 bit GPIO
401 interface (8 bit data, 8 bit control). If you anticpate using
402 this driver, say Y or M; otherwise say N. You must specify the
403 GPIO IO address to be used for setting control and data.
404
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405config FB_ATARI
406 bool "Atari native chipset support"
407 depends on (FB = y) && ATARI && BROKEN
408 help
409 This is the frame buffer device driver for the builtin graphics
410 chipset found in Ataris.
411
412config FB_OF
413 bool "Open Firmware frame buffer device support"
414 depends on (FB = y) && (PPC64 || PPC_OF)
415 select FB_CFB_FILLRECT
416 select FB_CFB_COPYAREA
417 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418 select FB_MACMODES
419 help
420 Say Y if you want support with Open Firmware for your graphics
421 board.
422
423config FB_CONTROL
424 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700425 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426 select FB_CFB_FILLRECT
427 select FB_CFB_COPYAREA
428 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 select FB_MACMODES
430 help
431 This driver supports a frame buffer for the graphics adapter in the
432 Power Macintosh 7300 and others.
433
434config FB_PLATINUM
435 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700436 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437 select FB_CFB_FILLRECT
438 select FB_CFB_COPYAREA
439 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 select FB_MACMODES
441 help
442 This driver supports a frame buffer for the "platinum" graphics
443 adapter in some Power Macintoshes.
444
445config FB_VALKYRIE
446 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700447 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700448 select FB_CFB_FILLRECT
449 select FB_CFB_COPYAREA
450 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451 select FB_MACMODES
452 help
453 This driver supports a frame buffer for the "valkyrie" graphics
454 adapter in some Power Macintoshes.
455
456config FB_CT65550
457 bool "Chips 65550 display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700458 depends on (FB = y) && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700459 select FB_CFB_FILLRECT
460 select FB_CFB_COPYAREA
461 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700462 help
463 This is the frame buffer device driver for the Chips & Technologies
464 65550 graphics chip in PowerBooks.
465
466config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800467 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700468 depends on (FB = y) && PCI
469 select FB_CFB_FILLRECT
470 select FB_CFB_COPYAREA
471 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700472 help
473 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700474
475config FB_IMSTT
476 bool "IMS Twin Turbo display support"
477 depends on (FB = y) && PCI
478 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700479 select FB_MACMODES if PPC
480 help
481 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
482 many Macintosh and compatible computers.
483
Linus Torvalds1da177e2005-04-16 15:20:36 -0700484config FB_VGA16
485 tristate "VGA 16-color graphics support"
486 depends on FB && (X86 || PPC)
487 select FB_CFB_FILLRECT
488 select FB_CFB_COPYAREA
489 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490 help
491 This is the frame buffer device driver for VGA 16 color graphic
492 cards. Say Y if you have such a card.
493
494 To compile this driver as a module, choose M here: the
495 module will be called vga16fb.
496
497config FB_STI
498 tristate "HP STI frame buffer device support"
499 depends on FB && PARISC
500 select FB_CFB_FILLRECT
501 select FB_CFB_COPYAREA
502 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700503 default y
504 ---help---
505 STI refers to the HP "Standard Text Interface" which is a set of
506 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
507 Enabling this option will implement the linux framebuffer device
508 using calls to the STI BIOS routines for initialisation.
509
510 If you enable this option, you will get a planar framebuffer device
511 /dev/fb which will work on the most common HP graphic cards of the
512 NGLE family, including the artist chips (in the 7xx and Bxxx series),
513 HCRX, HCRX24, CRX, CRX24 and VisEG series.
514
515 It is safe to enable this option, so you should probably say "Y".
516
517config FB_MAC
518 bool "Generic Macintosh display support"
519 depends on (FB = y) && MAC
520 select FB_CFB_FILLRECT
521 select FB_CFB_COPYAREA
522 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523 select FB_MACMODES
524
525# bool ' Apple DAFB display support' CONFIG_FB_DAFB
526config FB_HP300
527 bool
528 depends on (FB = y) && HP300
529 select FB_CFB_FILLRECT
530 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700531 default y
532
533config FB_TGA
534 tristate "TGA framebuffer support"
535 depends on FB && ALPHA
536 select FB_CFB_FILLRECT
537 select FB_CFB_COPYAREA
538 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539 help
540 This is the frame buffer device driver for generic TGA graphic
541 cards. Say Y if you have one of those.
542
543config FB_VESA
544 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800545 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700546 select FB_CFB_FILLRECT
547 select FB_CFB_COPYAREA
548 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549 help
550 This is the frame buffer device driver for generic VESA 2.0
551 compliant graphic cards. The older VESA 1.2 cards are not supported.
552 You will get a boot time penguin logo at no additional cost. Please
553 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
554
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700555config FB_IMAC
556 bool "Intel-based Macintosh Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700557 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700558 select FB_CFB_FILLRECT
559 select FB_CFB_COPYAREA
560 select FB_CFB_IMAGEBLIT
561 help
562 This is the frame buffer device driver for the Intel-based Macintosh
563
Linus Torvalds1da177e2005-04-16 15:20:36 -0700564config FB_HGA
565 tristate "Hercules mono graphics support"
566 depends on FB && X86
567 select FB_CFB_FILLRECT
568 select FB_CFB_COPYAREA
569 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700570 help
571 Say Y here if you have a Hercules mono graphics card.
572
573 To compile this driver as a module, choose M here: the
574 module will be called hgafb.
575
576 As this card technology is 15 years old, most people will answer N
577 here.
578
579config FB_HGA_ACCEL
580 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
581 depends on FB_HGA && EXPERIMENTAL
582 ---help---
583 This will compile the Hercules mono graphics with
584 acceleration functions.
585
Linus Torvalds1da177e2005-04-16 15:20:36 -0700586config FB_SGIVW
587 tristate "SGI Visual Workstation framebuffer support"
588 depends on FB && X86_VISWS
589 select FB_CFB_FILLRECT
590 select FB_CFB_COPYAREA
591 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700592 help
593 SGI Visual Workstation support for framebuffer graphics.
594
595config FB_GBE
596 bool "SGI Graphics Backend frame buffer support"
597 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
598 select FB_CFB_FILLRECT
599 select FB_CFB_COPYAREA
600 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700601 help
602 This is the frame buffer device driver for SGI Graphics Backend.
603 This chip is used in SGI O2 and Visual Workstation 320/540.
604
605config FB_GBE_MEM
606 int "Video memory size in MB"
607 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800608 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700609 help
610 This is the amount of memory reserved for the framebuffer,
611 which can be any value between 1MB and 8MB.
612
Linus Torvalds1da177e2005-04-16 15:20:36 -0700613config FB_SUN3
614 bool "Sun3 framebuffer support"
615 depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
616
Mark Fortescue1a571982005-11-29 19:34:44 -0800617config FB_SBUS
618 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800619 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800620 help
621 Say Y if you want support for SBUS or UPA based frame buffer device.
622
Linus Torvalds1da177e2005-04-16 15:20:36 -0700623config FB_BW2
624 bool "BWtwo support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800625 depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700626 select FB_CFB_FILLRECT
627 select FB_CFB_COPYAREA
628 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700629 help
630 This is the frame buffer device driver for the BWtwo frame buffer.
631
632config FB_CG3
633 bool "CGthree support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800634 depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
Mark Fortescue1a571982005-11-29 19:34:44 -0800635 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700636 select FB_CFB_COPYAREA
637 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700638 help
639 This is the frame buffer device driver for the CGthree frame buffer.
640
641config FB_CG6
642 bool "CGsix (GX,TurboGX) support"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800643 depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700644 select FB_CFB_COPYAREA
645 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700646 help
647 This is the frame buffer device driver for the CGsix (GX, TurboGX)
648 frame buffer.
649
650config FB_PVR2
651 tristate "NEC PowerVR 2 display support"
652 depends on FB && SH_DREAMCAST
653 select FB_CFB_FILLRECT
654 select FB_CFB_COPYAREA
655 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700656 ---help---
657 Say Y here if you have a PowerVR 2 card in your box. If you plan to
658 run linux on your Dreamcast, you will have to say Y here.
659 This driver may or may not work on other PowerVR 2 cards, but is
660 totally untested. Use at your own risk. If unsure, say N.
661
662 To compile this driver as a module, choose M here: the
663 module will be called pvr2fb.
664
665 You can pass several parameters to the driver at boot time or at
666 module load time. The parameters look like "video=pvr2:XXX", where
667 the meaning of XXX can be found at the end of the main source file
668 (<file:drivers/video/pvr2fb.c>). Please see the file
669 <file:Documentation/fb/pvr2fb.txt>.
670
671config FB_EPSON1355
672 bool "Epson 1355 framebuffer support"
673 depends on (FB = y) && (SUPERH || ARCH_CEIVA)
674 select FB_CFB_FILLRECT
675 select FB_CFB_COPYAREA
676 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700677 help
678 Build in support for the SED1355 Epson Research Embedded RAMDAC
679 LCD/CRT Controller (since redesignated as the S1D13505) as a
680 framebuffer. Product specs at
681 <http://www.erd.epson.com/vdc/html/products.htm>.
682
Randy Dunlapecc41d52005-11-07 01:00:29 -0800683config FB_S1D13XXX
684 tristate "Epson S1D13XXX framebuffer support"
685 depends on FB
686 select FB_CFB_FILLRECT
687 select FB_CFB_COPYAREA
688 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800689 help
690 Support for S1D13XXX framebuffer device family (currently only
691 working with S1D13806). Product specs at
692 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
693
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694config FB_NVIDIA
695 tristate "nVidia Framebuffer Support"
696 depends on FB && PCI
697 select I2C_ALGOBIT if FB_NVIDIA_I2C
698 select I2C if FB_NVIDIA_I2C
699 select FB_MODE_HELPERS
700 select FB_CFB_FILLRECT
701 select FB_CFB_COPYAREA
702 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703 help
704 This driver supports graphics boards with the nVidia chips, TNT
705 and newer. For very old chipsets, such as the RIVA128, then use
706 the rivafb.
707 Say Y if you have such a graphics board.
708
709 To compile this driver as a module, choose M here: the
710 module will be called nvidiafb.
711
712config FB_NVIDIA_I2C
713 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -0800714 depends on FB_NVIDIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700715 help
716 This enables I2C support for nVidia Chipsets. This is used
717 only for getting EDID information from the attached display
718 allowing for robust video mode handling and switching.
719
720 Because fbdev-2.6 requires that drivers must be able to
721 independently validate video mode parameters, you should say Y
722 here.
723
Michael Hanselmann5474c122006-06-25 05:47:08 -0700724config FB_NVIDIA_BACKLIGHT
725 bool "Support for backlight control"
Michael Hanselmann4b755992006-07-30 03:04:19 -0700726 depends on FB_NVIDIA && PMAC_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -0700727 select FB_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -0700728 default y
729 help
730 Say Y here if you want to control the backlight of your display.
731
Linus Torvalds1da177e2005-04-16 15:20:36 -0700732config FB_RIVA
733 tristate "nVidia Riva support"
734 depends on FB && PCI
735 select I2C_ALGOBIT if FB_RIVA_I2C
736 select I2C if FB_RIVA_I2C
737 select FB_MODE_HELPERS
738 select FB_CFB_FILLRECT
739 select FB_CFB_COPYAREA
740 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700741 help
742 This driver supports graphics boards with the nVidia Riva/Geforce
743 chips.
744 Say Y if you have such a graphics board.
745
746 To compile this driver as a module, choose M here: the
747 module will be called rivafb.
748
749config FB_RIVA_I2C
750 bool "Enable DDC Support"
751 depends on FB_RIVA
752 help
753 This enables I2C support for nVidia Chipsets. This is used
754 only for getting EDID information from the attached display
755 allowing for robust video mode handling and switching.
756
757 Because fbdev-2.6 requires that drivers must be able to
758 independently validate video mode parameters, you should say Y
759 here.
760
761config FB_RIVA_DEBUG
762 bool "Lots of debug output from Riva(nVidia) driver"
763 depends on FB_RIVA
764 default n
765 help
766 Say Y here if you want the Riva driver to output all sorts
767 of debugging informations to provide to the maintainer when
768 something goes wrong.
769
Michael Hanselmann5474c122006-06-25 05:47:08 -0700770config FB_RIVA_BACKLIGHT
771 bool "Support for backlight control"
Michael Hanselmann4b755992006-07-30 03:04:19 -0700772 depends on FB_RIVA && PMAC_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -0700773 select FB_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -0700774 default y
775 help
776 Say Y here if you want to control the backlight of your display.
777
Linus Torvalds1da177e2005-04-16 15:20:36 -0700778config FB_I810
779 tristate "Intel 810/815 support (EXPERIMENTAL)"
Brian Gerst0d078f62005-10-30 14:59:20 -0800780 depends on FB && EXPERIMENTAL && PCI && X86_32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700781 select AGP
782 select AGP_INTEL
783 select FB_MODE_HELPERS
784 select FB_CFB_FILLRECT
785 select FB_CFB_COPYAREA
786 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700787 help
788 This driver supports the on-board graphics built in to the Intel 810
789 and 815 chipsets. Say Y if you have and plan to use such a board.
790
791 To compile this driver as a module, choose M here: the
792 module will be called i810fb.
793
794 For more information, please read
795 <file:Documentation/fb/intel810.txt>
796
797config FB_I810_GTF
798 bool "use VESA Generalized Timing Formula"
799 depends on FB_I810
800 help
801 If you say Y, then the VESA standard, Generalized Timing Formula
802 or GTF, will be used to calculate the required video timing values
803 per video mode. Since the GTF allows nondiscrete timings
804 (nondiscrete being a range of values as opposed to discrete being a
805 set of values), you'll be able to use any combination of horizontal
806 and vertical resolutions, and vertical refresh rates without having
807 to specify your own timing parameters. This is especially useful
808 to maximize the performance of an aging display, or if you just
809 have a display with nonstandard dimensions. A VESA compliant
810 monitor is recommended, but can still work with non-compliant ones.
811 If you need or want this, then select this option. The timings may
812 not be compliant with Intel's recommended values. Use at your own
813 risk.
814
815 If you say N, the driver will revert to discrete video timings
816 using a set recommended by Intel in their documentation.
817
818 If unsure, say N.
819
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -0700820config FB_I810_I2C
821 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -0700822 depends on FB_I810 && FB_I810_GTF
823 select I2C
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -0700824 select I2C_ALGOBIT
825 help
826
Linus Torvalds1da177e2005-04-16 15:20:36 -0700827config FB_INTEL
828 tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
Dave Airlie0c187ad2006-03-23 11:20:08 +1100829 depends on FB && EXPERIMENTAL && PCI && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700830 select AGP
831 select AGP_INTEL
832 select FB_MODE_HELPERS
833 select FB_CFB_FILLRECT
834 select FB_CFB_COPYAREA
835 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700836 help
837 This driver supports the on-board graphics built in to the Intel
838 830M/845G/852GM/855GM/865G chipsets.
839 Say Y if you have and plan to use such a board.
840
841 To compile this driver as a module, choose M here: the
842 module will be called intelfb.
843
844config FB_INTEL_DEBUG
845 bool "Intel driver Debug Messages"
846 depends on FB_INTEL
847 ---help---
848 Say Y here if you want the Intel driver to output all sorts
849 of debugging informations to provide to the maintainer when
850 something goes wrong.
851
852config FB_MATROX
853 tristate "Matrox acceleration"
854 depends on FB && PCI
855 select FB_CFB_FILLRECT
856 select FB_CFB_COPYAREA
857 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700858 select FB_TILEBLITTING
859 select FB_MACMODES if PPC_PMAC
860 ---help---
861 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
862 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
863 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
864 Matrox G400, G450 or G550 card in your box.
865
866 To compile this driver as a module, choose M here: the
867 module will be called matroxfb.
868
869 You can pass several parameters to the driver at boot time or at
870 module load time. The parameters look like "video=matrox:XXX", and
871 are described in <file:Documentation/fb/matroxfb.txt>.
872
873config FB_MATROX_MILLENIUM
874 bool "Millennium I/II support"
875 depends on FB_MATROX
876 help
877 Say Y here if you have a Matrox Millennium or Matrox Millennium II
878 video card. If you select "Advanced lowlevel driver options" below,
879 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
880 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
881 also use font widths different from 8.
882
883config FB_MATROX_MYSTIQUE
884 bool "Mystique support"
885 depends on FB_MATROX
886 help
887 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
888 video card. If you select "Advanced lowlevel driver options" below,
889 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
890 packed pixel and 32 bpp packed pixel. You can also use font widths
891 different from 8.
892
893config FB_MATROX_G
894 bool "G100/G200/G400/G450/G550 support"
895 depends on FB_MATROX
896 ---help---
897 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
898 video card. If you select "Advanced lowlevel driver options", you
899 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
900 pixel and 32 bpp packed pixel. You can also use font widths
901 different from 8.
902
903 If you need support for G400 secondary head, you must first say Y to
904 "I2C support" in the character devices section, and then to
905 "Matrox I2C support" and "G400 second head support" here in the
906 framebuffer section. G450/G550 secondary head and digital output
907 are supported without additional modules.
908
909 The driver starts in monitor mode. You must use the matroxset tool
910 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
911 swap primary and secondary head outputs, or to change output mode.
912 Secondary head driver always start in 640x480 resolution and you
913 must use fbset to change it.
914
915 Do not forget that second head supports only 16 and 32 bpp
916 packed pixels, so it is a good idea to compile them into the kernel
917 too. You can use only some font widths, as the driver uses generic
918 painting procedures (the secondary head does not use acceleration
919 engine).
920
921 G450/G550 hardware can display TV picture only from secondary CRTC,
922 and it performs no scaling, so picture must have 525 or 625 lines.
923
924config FB_MATROX_I2C
925 tristate "Matrox I2C support"
926 depends on FB_MATROX && I2C
927 select I2C_ALGOBIT
928 ---help---
929 This drivers creates I2C buses which are needed for accessing the
930 DDC (I2C) bus present on all Matroxes, an I2C bus which
931 interconnects Matrox optional devices, like MGA-TVO on G200 and
932 G400, and the secondary head DDC bus, present on G400 only.
933
934 You can say Y or M here if you want to experiment with monitor
935 detection code. You must say Y or M here if you want to use either
936 second head of G400 or MGA-TVO on G200 or G400.
937
938 If you compile it as module, it will create a module named
939 i2c-matroxfb.
940
941config FB_MATROX_MAVEN
942 tristate "G400 second head support"
943 depends on FB_MATROX_G && FB_MATROX_I2C
944 ---help---
945 WARNING !!! This support does not work with G450 !!!
946
947 Say Y or M here if you want to use a secondary head (meaning two
948 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
949 head is not compatible with accelerated XFree 3.3.x SVGA servers -
950 secondary head output is blanked while you are in X. With XFree
951 3.9.17 preview you can use both heads if you use SVGA over fbdev or
952 the fbdev driver on first head and the fbdev driver on second head.
953
954 If you compile it as module, two modules are created,
955 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
956 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
957 also load i2c-matroxfb to get it to run.
958
959 The driver starts in monitor mode and you must use the matroxset
960 tool (available at
961 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
962 PAL or NTSC or to swap primary and secondary head outputs.
963 Secondary head driver also always start in 640x480 resolution, you
964 must use fbset to change it.
965
966 Also do not forget that second head supports only 16 and 32 bpp
967 packed pixels, so it is a good idea to compile them into the kernel
968 too. You can use only some font widths, as the driver uses generic
969 painting procedures (the secondary head does not use acceleration
970 engine).
971
972config FB_MATROX_MULTIHEAD
973 bool "Multihead support"
974 depends on FB_MATROX
975 ---help---
976 Say Y here if you have more than one (supported) Matrox device in
977 your computer and you want to use all of them for different monitors
978 ("multihead"). If you have only one device, you should say N because
979 the driver compiled with Y is larger and a bit slower, especially on
980 ia32 (ix86).
981
982 If you said M to "Matrox unified accelerated driver" and N here, you
983 will still be able to use several Matrox devices simultaneously:
984 insert several instances of the module matroxfb into the kernel
985 with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
986 for the different Matrox devices. This method is slightly faster but
987 uses 40 KB of kernel memory per Matrox card.
988
989 There is no need for enabling 'Matrox multihead support' if you have
990 only one Matrox card in the box.
991
Linus Torvalds1da177e2005-04-16 15:20:36 -0700992config FB_RADEON
993 tristate "ATI Radeon display support"
994 depends on FB && PCI
995 select I2C_ALGOBIT if FB_RADEON_I2C
996 select I2C if FB_RADEON_I2C
997 select FB_MODE_HELPERS
998 select FB_CFB_FILLRECT
999 select FB_CFB_COPYAREA
1000 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001001 select FB_MACMODES if PPC_OF
1002 help
1003 Choose this option if you want to use an ATI Radeon graphics card as
1004 a framebuffer device. There are both PCI and AGP versions. You
1005 don't need to choose this to run the Radeon in plain VGA mode.
1006
1007 If you say Y here and want DDC/I2C support you must first say Y to
1008 "I2C support" and "I2C bit-banging support" in the character devices
1009 section.
1010
1011 If you say M here then "I2C support" and "I2C bit-banging support"
1012 can be build either as modules or built-in.
1013
1014 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -07001015 http://apps.ati.com/ATIcompare/
Michael Hanselmann5474c122006-06-25 05:47:08 -07001016
Linus Torvalds1da177e2005-04-16 15:20:36 -07001017config FB_RADEON_I2C
1018 bool "DDC/I2C for ATI Radeon support"
1019 depends on FB_RADEON
1020 default y
1021 help
1022 Say Y here if you want DDC/I2C support for your Radeon board.
1023
Michael Hanselmann5474c122006-06-25 05:47:08 -07001024config FB_RADEON_BACKLIGHT
1025 bool "Support for backlight control"
Michael Hanselmann4b755992006-07-30 03:04:19 -07001026 depends on FB_RADEON && PMAC_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -07001027 select FB_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -07001028 default y
1029 help
1030 Say Y here if you want to control the backlight of your display.
1031
Linus Torvalds1da177e2005-04-16 15:20:36 -07001032config FB_RADEON_DEBUG
1033 bool "Lots of debug output from Radeon driver"
1034 depends on FB_RADEON
1035 default n
1036 help
1037 Say Y here if you want the Radeon driver to output all sorts
1038 of debugging informations to provide to the maintainer when
1039 something goes wrong.
1040
1041config FB_ATY128
1042 tristate "ATI Rage128 display support"
1043 depends on FB && PCI
1044 select FB_CFB_FILLRECT
1045 select FB_CFB_COPYAREA
1046 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001047 select FB_MACMODES if PPC_PMAC
1048 help
1049 This driver supports graphics boards with the ATI Rage128 chips.
1050 Say Y if you have such a graphics board and read
1051 <file:Documentation/fb/aty128fb.txt>.
1052
1053 To compile this driver as a module, choose M here: the
1054 module will be called aty128fb.
1055
Michael Hanselmann5474c122006-06-25 05:47:08 -07001056config FB_ATY128_BACKLIGHT
1057 bool "Support for backlight control"
Michael Hanselmann4b755992006-07-30 03:04:19 -07001058 depends on FB_ATY128 && PMAC_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -07001059 select FB_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -07001060 default y
1061 help
1062 Say Y here if you want to control the backlight of your display.
1063
Linus Torvalds1da177e2005-04-16 15:20:36 -07001064config FB_ATY
1065 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001066 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001067 select FB_CFB_FILLRECT
1068 select FB_CFB_COPYAREA
1069 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001070 select FB_MACMODES if PPC
1071 help
1072 This driver supports graphics boards with the ATI Mach64 chips.
1073 Say Y if you have such a graphics board.
1074
1075 To compile this driver as a module, choose M here: the
1076 module will be called atyfb.
1077
1078config FB_ATY_CT
1079 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1080 depends on PCI && FB_ATY
1081 default y if SPARC64 && FB_PCI
1082 help
1083 Say Y here to support use of ATI's 64-bit Rage boards (or other
1084 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1085 framebuffer device. The ATI product support page for these boards
1086 is at <http://support.ati.com/products/pc/mach64/>.
1087
1088config FB_ATY_GENERIC_LCD
1089 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1090 depends on FB_ATY_CT
1091 help
1092 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1093 Rage XC, or Rage XL chipset.
1094
Linus Torvalds1da177e2005-04-16 15:20:36 -07001095config FB_ATY_GX
1096 bool "Mach64 GX support" if PCI
1097 depends on FB_ATY
1098 default y if ATARI
1099 help
1100 Say Y here to support use of the ATI Mach64 Graphics Expression
1101 board (or other boards based on the Mach64 GX chipset) as a
1102 framebuffer device. The ATI product support page for these boards
1103 is at
1104 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1105
Michael Hanselmann5474c122006-06-25 05:47:08 -07001106config FB_ATY_BACKLIGHT
1107 bool "Support for backlight control"
Michael Hanselmann4b755992006-07-30 03:04:19 -07001108 depends on FB_ATY && PMAC_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -07001109 select FB_BACKLIGHT
Michael Hanselmann5474c122006-06-25 05:47:08 -07001110 default y
1111 help
1112 Say Y here if you want to control the backlight of your display.
1113
Randy.Dunlape65c0852005-11-07 01:00:28 -08001114config FB_S3TRIO
1115 bool "S3 Trio display support"
1116 depends on (FB = y) && PPC && BROKEN
1117 help
1118 If you have a S3 Trio say Y. Say N for S3 Virge.
1119
Linus Torvalds1da177e2005-04-16 15:20:36 -07001120config FB_SAVAGE
1121 tristate "S3 Savage support"
1122 depends on FB && PCI && EXPERIMENTAL
1123 select I2C_ALGOBIT if FB_SAVAGE_I2C
1124 select I2C if FB_SAVAGE_I2C
1125 select FB_MODE_HELPERS
1126 select FB_CFB_FILLRECT
1127 select FB_CFB_COPYAREA
1128 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001129 help
1130 This driver supports notebooks and computers with S3 Savage PCI/AGP
1131 chips.
1132
1133 Say Y if you have such a graphics card.
1134
1135 To compile this driver as a module, choose M here; the module
1136 will be called savagefb.
1137
1138config FB_SAVAGE_I2C
1139 bool "Enable DDC2 Support"
1140 depends on FB_SAVAGE
1141 help
1142 This enables I2C support for S3 Savage Chipsets. This is used
1143 only for getting EDID information from the attached display
1144 allowing for robust video mode handling and switching.
1145
1146 Because fbdev-2.6 requires that drivers must be able to
1147 independently validate video mode parameters, you should say Y
1148 here.
1149
1150config FB_SAVAGE_ACCEL
1151 bool "Enable Console Acceleration"
1152 depends on FB_SAVAGE
1153 default n
1154 help
1155 This option will compile in console acceleration support. If
1156 the resulting framebuffer console has bothersome glitches, then
1157 choose N here.
1158
1159config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001160 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001161 depends on FB && PCI
1162 select FB_CFB_FILLRECT
1163 select FB_CFB_COPYAREA
1164 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001165 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001166 This is the frame buffer device driver for the SiS 300, 315, 330
1167 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1168 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001169
1170 To compile this driver as a module, choose M here; the module
1171 will be called sisfb.
1172
1173config FB_SIS_300
1174 bool "SiS 300 series support"
1175 depends on FB_SIS
1176 help
1177 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1178
1179config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001180 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001181 depends on FB_SIS
1182 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001183 Say Y here to support use of the SiS 315, 330 and 340 series
1184 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1185 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001186
1187config FB_NEOMAGIC
1188 tristate "NeoMagic display support"
1189 depends on FB && PCI
1190 select FB_MODE_HELPERS
1191 select FB_CFB_FILLRECT
1192 select FB_CFB_COPYAREA
1193 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001194 help
1195 This driver supports notebooks with NeoMagic PCI chips.
1196 Say Y if you have such a graphics card.
1197
1198 To compile this driver as a module, choose M here: the
1199 module will be called neofb.
1200
1201config FB_KYRO
1202 tristate "IMG Kyro support"
1203 depends on FB && PCI
1204 select FB_CFB_FILLRECT
1205 select FB_CFB_COPYAREA
1206 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001207 help
1208 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1209 graphics board.
1210
1211 To compile this driver as a module, choose M here: the
1212 module will be called kyrofb.
1213
1214config FB_3DFX
1215 tristate "3Dfx Banshee/Voodoo3 display support"
1216 depends on FB && PCI
1217 select FB_CFB_IMAGEBLIT
1218 select FB_CFB_FILLRECT
1219 select FB_CFB_COPYAREA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001220 help
1221 This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
1222 chips. Say Y if you have such a graphics board.
1223
1224 To compile this driver as a module, choose M here: the
1225 module will be called tdfxfb.
1226
1227config FB_3DFX_ACCEL
1228 bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
1229 depends on FB_3DFX && EXPERIMENTAL
1230 ---help---
1231 This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
1232 with acceleration functions.
1233
1234
1235config FB_VOODOO1
1236 tristate "3Dfx Voodoo Graphics (sst1) support"
1237 depends on FB && PCI
1238 select FB_CFB_FILLRECT
1239 select FB_CFB_COPYAREA
1240 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001241 ---help---
1242 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1243 Voodoo2 (cvg) based graphics card.
1244
1245 To compile this driver as a module, choose M here: the
1246 module will be called sstfb.
1247
1248 WARNING: Do not use any application that uses the 3D engine
1249 (namely glide) while using this driver.
1250 Please read the <file:Documentation/fb/README-sstfb.txt> for supported
1251 options and other important info support.
1252
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001253config FB_CYBLA
1254 tristate "Cyberblade/i1 support"
Knut Petersen44637a12006-01-09 15:04:20 +01001255 depends on FB && PCI && X86_32 && !64BIT
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001256 select FB_CFB_IMAGEBLIT
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001257 select VIDEO_SELECT
1258 ---help---
1259 This driver is supposed to support the Trident Cyberblade/i1
1260 graphics core integrated in the VIA VT8601A North Bridge,
1261 also known as VIA Apollo PLE133.
1262
1263 Status:
1264 - Developed, tested and working on EPIA 5000 and EPIA 800.
1265 - Does work reliable on all systems with CRT/LCD connected to
1266 normal VGA ports.
1267 - Should work on systems that do use the internal LCD port, but
1268 this is absolutely not tested.
1269
1270 Character imageblit, copyarea and rectangle fill are hw accelerated,
1271 ypan scrolling is used by default.
1272
1273 Please do read <file:Documentation/fb/cyblafb/*>.
1274
1275 To compile this driver as a module, choose M here: the
1276 module will be called cyblafb.
1277
Linus Torvalds1da177e2005-04-16 15:20:36 -07001278config FB_TRIDENT
1279 tristate "Trident support"
1280 depends on FB && PCI
1281 select FB_CFB_FILLRECT
1282 select FB_CFB_COPYAREA
1283 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001284 ---help---
1285 This driver is supposed to support graphics boards with the
1286 Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
1287 but also on some motherboards. For more information, read
1288 <file:Documentation/fb/tridentfb.txt>
1289
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001290 Cyberblade/i1 support will be removed soon, use the cyblafb driver
1291 instead.
1292
Linus Torvalds1da177e2005-04-16 15:20:36 -07001293 Say Y if you have such a graphics board.
1294
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001295
Linus Torvalds1da177e2005-04-16 15:20:36 -07001296 To compile this driver as a module, choose M here: the
1297 module will be called tridentfb.
1298
1299config FB_TRIDENT_ACCEL
1300 bool "Trident Acceleration functions (EXPERIMENTAL)"
1301 depends on FB_TRIDENT && EXPERIMENTAL
1302 ---help---
1303 This will compile the Trident frame buffer device with
1304 acceleration functions.
1305
Linus Torvalds1da177e2005-04-16 15:20:36 -07001306config FB_PM3
1307 tristate "Permedia3 support"
1308 depends on FB && PCI && BROKEN
1309 help
1310 This is the frame buffer device driver for the 3DLabs Permedia3
1311 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1312 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1313 and maybe other boards.
1314
Linus Torvalds1da177e2005-04-16 15:20:36 -07001315config FB_AU1100
1316 bool "Au1100 LCD Driver"
1317 depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
1318
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001319config FB_AU1200
1320 bool "Au1200 LCD Driver"
1321 depends on FB && MIPS && SOC_AU1200
1322 select FB_CFB_FILLRECT
1323 select FB_CFB_COPYAREA
1324 select FB_CFB_IMAGEBLIT
1325 help
1326 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1327 various panels and CRTs by passing in kernel cmd line option
1328 au1200fb:panel=<name>.
1329
Linus Torvalds1da177e2005-04-16 15:20:36 -07001330source "drivers/video/geode/Kconfig"
1331
Linus Torvalds1da177e2005-04-16 15:20:36 -07001332config FB_FFB
1333 bool "Creator/Creator3D/Elite3D support"
1334 depends on FB_SBUS && SPARC64
1335 select FB_CFB_COPYAREA
1336 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001337 help
1338 This is the frame buffer device driver for the Creator, Creator3D,
1339 and Elite3D graphics boards.
1340
1341config FB_TCX
1342 bool "TCX (SS4/SS5 only) support"
1343 depends on FB_SBUS
1344 select FB_CFB_FILLRECT
1345 select FB_CFB_COPYAREA
1346 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001347 help
1348 This is the frame buffer device driver for the TCX 24/8bit frame
1349 buffer.
1350
1351config FB_CG14
1352 bool "CGfourteen (SX) support"
1353 depends on FB_SBUS
1354 select FB_CFB_FILLRECT
1355 select FB_CFB_COPYAREA
1356 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001357 help
1358 This is the frame buffer device driver for the CGfourteen frame
1359 buffer on Desktop SPARCsystems with the SX graphics option.
1360
1361config FB_P9100
1362 bool "P9100 (Sparcbook 3 only) support"
1363 depends on FB_SBUS
1364 select FB_CFB_FILLRECT
1365 select FB_CFB_COPYAREA
1366 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001367 help
1368 This is the frame buffer device driver for the P9100 card
1369 supported on Sparcbook 3 machines.
1370
1371config FB_LEO
1372 bool "Leo (ZX) support"
1373 depends on FB_SBUS
1374 select FB_CFB_FILLRECT
1375 select FB_CFB_COPYAREA
1376 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001377 help
1378 This is the frame buffer device driver for the SBUS-based Sun ZX
1379 (leo) frame buffer cards.
1380
1381config FB_PCI
1382 bool "PCI framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -08001383 depends on (FB = y) && PCI && SPARC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001384
1385config FB_IGA
1386 bool "IGA 168x display support"
1387 depends on SPARC32 && FB_PCI
1388 select FB_CFB_FILLRECT
1389 select FB_CFB_COPYAREA
1390 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001391 help
1392 This is the framebuffer device for the INTERGRAPHICS 1680 and
1393 successor frame buffer cards.
1394
1395config FB_HIT
1396 tristate "HD64461 Frame Buffer support"
1397 depends on FB && HD64461
1398 select FB_CFB_FILLRECT
1399 select FB_CFB_COPYAREA
1400 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001401 help
1402 This is the frame buffer device driver for the Hitachi HD64461 LCD
1403 frame buffer card.
1404
1405config FB_PMAG_AA
1406 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001407 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408 select FB_CFB_FILLRECT
1409 select FB_CFB_COPYAREA
1410 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001411 help
1412 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1413 used mainly in the MIPS-based DECstation series.
1414
1415config FB_PMAG_BA
1416 bool "PMAG-BA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001417 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001418 select FB_CFB_FILLRECT
1419 select FB_CFB_COPYAREA
1420 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001421 help
1422 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1423 used mainly in the MIPS-based DECstation series.
1424
1425config FB_PMAGB_B
1426 bool "PMAGB-B TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001427 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001428 select FB_CFB_FILLRECT
1429 select FB_CFB_COPYAREA
1430 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001431 help
1432 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1433 in the MIPS-based DECstation series. The card is currently only
1434 supported in 1280x1024x8 mode.
1435
1436config FB_MAXINE
1437 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001438 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001439 select FB_CFB_FILLRECT
1440 select FB_CFB_COPYAREA
1441 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001442 help
1443 Support for the onboard framebuffer (1024x768x8) in the Personal
1444 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1445 Codename "Maxine").
1446
1447config FB_TX3912
1448 bool "TMPTX3912/PR31700 frame buffer support"
1449 depends on (FB = y) && NINO
1450 select FB_CFB_FILLRECT
1451 select FB_CFB_COPYAREA
1452 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001453 help
1454 The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
1455 see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
1456
1457 Say Y here to enable kernel support for the on-board framebuffer.
1458
1459config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001460 bool "G364 frame buffer support"
1461 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001462 select FB_CFB_FILLRECT
1463 select FB_CFB_COPYAREA
1464 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001465 help
1466 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1467 Olivetti M700-10 systems.
1468
1469config FB_68328
1470 bool "Motorola 68328 native frame buffer support"
1471 depends on FB && (M68328 || M68EZ328 || M68VZ328)
1472 select FB_CFB_FILLRECT
1473 select FB_CFB_COPYAREA
1474 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001475 help
1476 Say Y here if you want to support the built-in frame buffer of
1477 the Motorola 68328 CPU family.
1478
1479config FB_PXA
1480 tristate "PXA LCD framebuffer support"
1481 depends on FB && ARCH_PXA
1482 select FB_CFB_FILLRECT
1483 select FB_CFB_COPYAREA
1484 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001485 ---help---
1486 Frame buffer driver for the built-in LCD controller in the Intel
1487 PXA2x0 processor.
1488
1489 This driver is also available as a module ( = code which can be
1490 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001491 module will be called pxafb. If you want to compile it as a module,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001492 say M here and read <file:Documentation/modules.txt>.
1493
1494 If unsure, say N.
1495
Linus Torvalds1da177e2005-04-16 15:20:36 -07001496config FB_PXA_PARAMETERS
1497 bool "PXA LCD command line parameters"
1498 default n
1499 depends on FB_PXA
1500 ---help---
1501 Enable the use of kernel command line or module parameters
1502 to configure the physical properties of the LCD panel when
1503 using the PXA LCD driver.
1504
1505 This option allows you to override the panel parameters
1506 supplied by the platform in order to support multiple
1507 different models of flatpanel. If you will only be using a
1508 single model of flatpanel then you can safely leave this
1509 option disabled.
1510
1511 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1512
Mike Rapoport22caf042006-07-14 00:24:34 -07001513config FB_MBX
1514 tristate "2700G LCD framebuffer support"
1515 depends on FB && ARCH_PXA
1516 select FB_CFB_FILLRECT
1517 select FB_CFB_COPYAREA
1518 select FB_CFB_IMAGEBLIT
1519 ---help---
1520 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1521 Accelerator
1522
1523config FB_MBX_DEBUG
1524 bool "Enable debugging info via debugfs"
1525 depends on FB_MBX && DEBUG_FS
1526 default n
1527 ---help---
1528 Enable this if you want debugging information using the debug
1529 filesystem (debugfs)
1530
1531 If unsure, say N.
1532
Randy Dunlapecc41d52005-11-07 01:00:29 -08001533config FB_W100
1534 tristate "W100 frame buffer support"
1535 depends on FB && PXA_SHARPSL
1536 select FB_CFB_FILLRECT
1537 select FB_CFB_COPYAREA
1538 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001539 ---help---
1540 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1541
1542 This driver is also available as a module ( = code which can be
1543 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001544 module will be called w100fb. If you want to compile it as a module,
Randy Dunlapecc41d52005-11-07 01:00:29 -08001545 say M here and read <file:Documentation/modules.txt>.
1546
1547 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001548
Arnaud Patard20fd5762005-09-09 13:10:07 -07001549config FB_S3C2410
1550 tristate "S3C2410 LCD framebuffer support"
1551 depends on FB && ARCH_S3C2410
1552 select FB_CFB_FILLRECT
1553 select FB_CFB_COPYAREA
1554 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07001555 ---help---
1556 Frame buffer driver for the built-in LCD controller in the Samsung
1557 S3C2410 processor.
1558
1559 This driver is also available as a module ( = code which can be
1560 inserted and removed from the running kernel whenever you want). The
1561 module will be called s3c2410fb. If you want to compile it as a module,
1562 say M here and read <file:Documentation/modules.txt>.
1563
1564 If unsure, say N.
1565config FB_S3C2410_DEBUG
1566 bool "S3C2410 lcd debug messages"
1567 depends on FB_S3C2410
1568 help
1569 Turn on debugging messages. Note that you can set/unset at run time
1570 through sysfs
1571
Vitaly Wool36c93662006-07-03 00:24:19 -07001572config FB_PNX4008_DUM
1573 tristate "Display Update Module support on Philips PNX4008 board"
1574 depends on FB && ARCH_PNX4008
1575 ---help---
1576 Say Y here to enable support for PNX4008 Display Update Module (DUM)
1577
1578config FB_PNX4008_DUM_RGB
1579 tristate "RGB Framebuffer support on Philips PNX4008 board"
1580 depends on FB_PNX4008_DUM
1581 select FB_CFB_FILLRECT
1582 select FB_CFB_COPYAREA
1583 select FB_CFB_IMAGEBLIT
1584 ---help---
1585 Say Y here to enable support for PNX4008 RGB Framebuffer
1586
Linus Torvalds1da177e2005-04-16 15:20:36 -07001587config FB_VIRTUAL
1588 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
1589 depends on FB
1590 select FB_CFB_FILLRECT
1591 select FB_CFB_COPYAREA
1592 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001593 ---help---
1594 This is a `virtual' frame buffer device. It operates on a chunk of
1595 unswappable kernel memory instead of on the memory of a graphics
1596 board. This means you cannot see any output sent to this frame
1597 buffer device, while it does consume precious memory. The main use
1598 of this frame buffer device is testing and debugging the frame
1599 buffer subsystem. Do NOT enable it for normal systems! To protect
1600 the innocent, it has to be enabled explicitly at boot time using the
1601 kernel option `video=vfb:'.
1602
1603 To compile this driver as a module, choose M here: the
1604 module will be called vfb.
1605
1606 If unsure, say N.
1607if VT
1608 source "drivers/video/console/Kconfig"
1609endif
1610
1611if FB || SGI_NEWPORT_CONSOLE
1612 source "drivers/video/logo/Kconfig"
1613endif
1614
Antonino A. Daplas256154f2006-07-30 03:04:17 -07001615if SYSFS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001616 source "drivers/video/backlight/Kconfig"
1617endif
1618
1619endmenu
1620