| David Brownell | 1abb0dc | 2006-06-25 05:48:17 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. | 
 | 3 |  * | 
 | 4 |  *  Copyright (C) 2005 James Chapman (ds1337 core) | 
 | 5 |  *  Copyright (C) 2006 David Brownell | 
 | 6 |  * | 
 | 7 |  * This program is free software; you can redistribute it and/or modify | 
 | 8 |  * it under the terms of the GNU General Public License version 2 as | 
 | 9 |  * published by the Free Software Foundation. | 
 | 10 |  */ | 
 | 11 |  | 
 | 12 | #include <linux/module.h> | 
 | 13 | #include <linux/init.h> | 
 | 14 | #include <linux/slab.h> | 
 | 15 | #include <linux/i2c.h> | 
 | 16 | #include <linux/string.h> | 
 | 17 | #include <linux/rtc.h> | 
 | 18 | #include <linux/bcd.h> | 
 | 19 |  | 
 | 20 |  | 
 | 21 |  | 
 | 22 | /* We can't determine type by probing, but if we expect pre-Linux code | 
 | 23 |  * to have set the chip up as a clock (turning on the oscillator and | 
 | 24 |  * setting the date and time), Linux can ignore the non-clock features. | 
 | 25 |  * That's a natural job for a factory or repair bench. | 
 | 26 |  * | 
 | 27 |  * If the I2C "force" mechanism is used, we assume the chip is a ds1337. | 
 | 28 |  * (Much better would be board-specific tables of I2C devices, along with | 
 | 29 |  * the platform_data drivers would use to sort such issues out.) | 
 | 30 |  */ | 
 | 31 | enum ds_type { | 
 | 32 | 	unknown = 0, | 
 | 33 | 	ds_1307,		/* or ds1338, ... */ | 
 | 34 | 	ds_1337,		/* or ds1339, ... */ | 
 | 35 | 	ds_1340,		/* or st m41t00, ... */ | 
 | 36 | 	// rs5c372 too?  different address... | 
 | 37 | }; | 
 | 38 |  | 
 | 39 | static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END }; | 
 | 40 |  | 
 | 41 | I2C_CLIENT_INSMOD; | 
 | 42 |  | 
 | 43 |  | 
 | 44 |  | 
 | 45 | /* RTC registers don't differ much, except for the century flag */ | 
 | 46 | #define DS1307_REG_SECS		0x00	/* 00-59 */ | 
 | 47 | #	define DS1307_BIT_CH		0x80 | 
 | 48 | #define DS1307_REG_MIN		0x01	/* 00-59 */ | 
 | 49 | #define DS1307_REG_HOUR		0x02	/* 00-23, or 1-12{am,pm} */ | 
 | 50 | #	define DS1340_BIT_CENTURY_EN	0x80	/* in REG_HOUR */ | 
 | 51 | #	define DS1340_BIT_CENTURY	0x40	/* in REG_HOUR */ | 
 | 52 | #define DS1307_REG_WDAY		0x03	/* 01-07 */ | 
 | 53 | #define DS1307_REG_MDAY		0x04	/* 01-31 */ | 
 | 54 | #define DS1307_REG_MONTH	0x05	/* 01-12 */ | 
 | 55 | #	define DS1337_BIT_CENTURY	0x80	/* in REG_MONTH */ | 
 | 56 | #define DS1307_REG_YEAR		0x06	/* 00-99 */ | 
 | 57 |  | 
 | 58 | /* Other registers (control, status, alarms, trickle charge, NVRAM, etc) | 
 | 59 |  * start at 7, and they differ a lot. Only control and status matter for RTC; | 
 | 60 |  * be careful using them. | 
 | 61 |  */ | 
 | 62 | #define DS1307_REG_CONTROL	0x07 | 
 | 63 | #	define DS1307_BIT_OUT		0x80 | 
 | 64 | #	define DS1307_BIT_SQWE		0x10 | 
 | 65 | #	define DS1307_BIT_RS1		0x02 | 
 | 66 | #	define DS1307_BIT_RS0		0x01 | 
 | 67 | #define DS1337_REG_CONTROL	0x0e | 
 | 68 | #	define DS1337_BIT_nEOSC		0x80 | 
 | 69 | #	define DS1337_BIT_RS2		0x10 | 
 | 70 | #	define DS1337_BIT_RS1		0x08 | 
 | 71 | #	define DS1337_BIT_INTCN		0x04 | 
 | 72 | #	define DS1337_BIT_A2IE		0x02 | 
 | 73 | #	define DS1337_BIT_A1IE		0x01 | 
 | 74 | #define DS1337_REG_STATUS	0x0f | 
 | 75 | #	define DS1337_BIT_OSF		0x80 | 
 | 76 | #	define DS1337_BIT_A2I		0x02 | 
 | 77 | #	define DS1337_BIT_A1I		0x01 | 
 | 78 | #define DS1339_REG_TRICKLE	0x10 | 
 | 79 |  | 
 | 80 |  | 
 | 81 |  | 
 | 82 | struct ds1307 { | 
 | 83 | 	u8			reg_addr; | 
 | 84 | 	u8			regs[8]; | 
 | 85 | 	enum ds_type		type; | 
 | 86 | 	struct i2c_msg		msg[2]; | 
 | 87 | 	struct i2c_client	client; | 
 | 88 | 	struct rtc_device	*rtc; | 
 | 89 | }; | 
 | 90 |  | 
 | 91 |  | 
 | 92 | static int ds1307_get_time(struct device *dev, struct rtc_time *t) | 
 | 93 | { | 
 | 94 | 	struct ds1307	*ds1307 = dev_get_drvdata(dev); | 
 | 95 | 	int		tmp; | 
 | 96 |  | 
 | 97 | 	/* read the RTC registers all at once */ | 
 | 98 | 	ds1307->msg[1].flags = I2C_M_RD; | 
 | 99 | 	ds1307->msg[1].len = 7; | 
 | 100 |  | 
 | 101 | 	tmp = i2c_transfer(ds1307->client.adapter, ds1307->msg, 2); | 
 | 102 | 	if (tmp != 2) { | 
 | 103 | 		dev_err(dev, "%s error %d\n", "read", tmp); | 
 | 104 | 		return -EIO; | 
 | 105 | 	} | 
 | 106 |  | 
 | 107 | 	dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | 
 | 108 | 			"read", | 
 | 109 | 			ds1307->regs[0], ds1307->regs[1], | 
 | 110 | 			ds1307->regs[2], ds1307->regs[3], | 
 | 111 | 			ds1307->regs[4], ds1307->regs[5], | 
 | 112 | 			ds1307->regs[6]); | 
 | 113 |  | 
 | 114 | 	t->tm_sec = BCD2BIN(ds1307->regs[DS1307_REG_SECS] & 0x7f); | 
 | 115 | 	t->tm_min = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | 
 | 116 | 	tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; | 
 | 117 | 	t->tm_hour = BCD2BIN(tmp); | 
 | 118 | 	t->tm_wday = BCD2BIN(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; | 
 | 119 | 	t->tm_mday = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | 
 | 120 | 	tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; | 
 | 121 | 	t->tm_mon = BCD2BIN(tmp) - 1; | 
 | 122 |  | 
 | 123 | 	/* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ | 
 | 124 | 	t->tm_year = BCD2BIN(ds1307->regs[DS1307_REG_YEAR]) + 100; | 
 | 125 |  | 
 | 126 | 	dev_dbg(dev, "%s secs=%d, mins=%d, " | 
 | 127 | 		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | 
 | 128 | 		"read", t->tm_sec, t->tm_min, | 
 | 129 | 		t->tm_hour, t->tm_mday, | 
 | 130 | 		t->tm_mon, t->tm_year, t->tm_wday); | 
 | 131 |  | 
 | 132 | 	return 0; | 
 | 133 | } | 
 | 134 |  | 
 | 135 | static int ds1307_set_time(struct device *dev, struct rtc_time *t) | 
 | 136 | { | 
 | 137 | 	struct ds1307	*ds1307 = dev_get_drvdata(dev); | 
 | 138 | 	int		result; | 
 | 139 | 	int		tmp; | 
 | 140 | 	u8		*buf = ds1307->regs; | 
 | 141 |  | 
 | 142 | 	dev_dbg(dev, "%s secs=%d, mins=%d, " | 
 | 143 | 		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | 
 | 144 | 		"write", dt->tm_sec, dt->tm_min, | 
 | 145 | 		dt->tm_hour, dt->tm_mday, | 
 | 146 | 		dt->tm_mon, dt->tm_year, dt->tm_wday); | 
 | 147 |  | 
 | 148 | 	*buf++ = 0;		/* first register addr */ | 
 | 149 | 	buf[DS1307_REG_SECS] = BIN2BCD(t->tm_sec); | 
 | 150 | 	buf[DS1307_REG_MIN] = BIN2BCD(t->tm_min); | 
 | 151 | 	buf[DS1307_REG_HOUR] = BIN2BCD(t->tm_hour); | 
 | 152 | 	buf[DS1307_REG_WDAY] = BIN2BCD(t->tm_wday + 1); | 
 | 153 | 	buf[DS1307_REG_MDAY] = BIN2BCD(t->tm_mday); | 
 | 154 | 	buf[DS1307_REG_MONTH] = BIN2BCD(t->tm_mon + 1); | 
 | 155 |  | 
 | 156 | 	/* assume 20YY not 19YY */ | 
 | 157 | 	tmp = t->tm_year - 100; | 
 | 158 | 	buf[DS1307_REG_YEAR] = BIN2BCD(tmp); | 
 | 159 |  | 
 | 160 | 	if (ds1307->type == ds_1337) | 
 | 161 | 		buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; | 
 | 162 | 	else if (ds1307->type == ds_1340) | 
 | 163 | 		buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN | 
 | 164 | 				| DS1340_BIT_CENTURY; | 
 | 165 |  | 
 | 166 | 	ds1307->msg[1].flags = 0; | 
 | 167 | 	ds1307->msg[1].len = 8; | 
 | 168 |  | 
 | 169 | 	dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | 
 | 170 | 		"write", buf[0], buf[1], buf[2], buf[3], | 
 | 171 | 		buf[4], buf[5], buf[6]); | 
 | 172 |  | 
 | 173 | 	result = i2c_transfer(ds1307->client.adapter, &ds1307->msg[1], 1); | 
 | 174 | 	if (result != 1) { | 
 | 175 | 		dev_err(dev, "%s error %d\n", "write", tmp); | 
 | 176 | 		return -EIO; | 
 | 177 | 	} | 
 | 178 | 	return 0; | 
 | 179 | } | 
 | 180 |  | 
 | 181 | static struct rtc_class_ops ds13xx_rtc_ops = { | 
 | 182 | 	.read_time	= ds1307_get_time, | 
 | 183 | 	.set_time	= ds1307_set_time, | 
 | 184 | }; | 
 | 185 |  | 
 | 186 | static struct i2c_driver ds1307_driver; | 
 | 187 |  | 
 | 188 | static int __devinit | 
 | 189 | ds1307_detect(struct i2c_adapter *adapter, int address, int kind) | 
 | 190 | { | 
 | 191 | 	struct ds1307		*ds1307; | 
 | 192 | 	int			err = -ENODEV; | 
 | 193 | 	struct i2c_client	*client; | 
 | 194 | 	int			tmp; | 
 | 195 |  | 
 | 196 | 	if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) { | 
 | 197 | 		err = -ENOMEM; | 
 | 198 | 		goto exit; | 
 | 199 | 	} | 
 | 200 |  | 
 | 201 | 	client = &ds1307->client; | 
 | 202 | 	client->addr = address; | 
 | 203 | 	client->adapter = adapter; | 
 | 204 | 	client->driver = &ds1307_driver; | 
 | 205 | 	client->flags = 0; | 
 | 206 |  | 
 | 207 | 	i2c_set_clientdata(client, ds1307); | 
 | 208 |  | 
 | 209 | 	ds1307->msg[0].addr = client->addr; | 
 | 210 | 	ds1307->msg[0].flags = 0; | 
 | 211 | 	ds1307->msg[0].len = 1; | 
 | 212 | 	ds1307->msg[0].buf = &ds1307->reg_addr; | 
 | 213 |  | 
 | 214 | 	ds1307->msg[1].addr = client->addr; | 
 | 215 | 	ds1307->msg[1].flags = I2C_M_RD; | 
 | 216 | 	ds1307->msg[1].len = sizeof(ds1307->regs); | 
 | 217 | 	ds1307->msg[1].buf = ds1307->regs; | 
 | 218 |  | 
 | 219 | 	/* HACK: "force" implies "needs ds1337-style-oscillator setup" */ | 
 | 220 | 	if (kind >= 0) { | 
 | 221 | 		ds1307->type = ds_1337; | 
 | 222 |  | 
 | 223 | 		ds1307->reg_addr = DS1337_REG_CONTROL; | 
 | 224 | 		ds1307->msg[1].len = 2; | 
 | 225 |  | 
 | 226 | 		tmp = i2c_transfer(client->adapter, ds1307->msg, 2); | 
 | 227 | 		if (tmp != 2) { | 
 | 228 | 			pr_debug("read error %d\n", tmp); | 
 | 229 | 			err = -EIO; | 
 | 230 | 			goto exit_free; | 
 | 231 | 		} | 
 | 232 |  | 
 | 233 | 		ds1307->reg_addr = 0; | 
 | 234 | 		ds1307->msg[1].len = sizeof(ds1307->regs); | 
 | 235 |  | 
 | 236 | 		/* oscillator is off; need to turn it on */ | 
 | 237 | 		if ((ds1307->regs[0] & DS1337_BIT_nEOSC) | 
 | 238 | 				|| (ds1307->regs[1] & DS1337_BIT_OSF)) { | 
 | 239 | 			printk(KERN_ERR "no ds1337 oscillator code\n"); | 
 | 240 | 			goto exit_free; | 
 | 241 | 		} | 
 | 242 | 	} else | 
 | 243 | 		ds1307->type = ds_1307; | 
 | 244 |  | 
 | 245 | read_rtc: | 
 | 246 | 	/* read RTC registers */ | 
 | 247 |  | 
 | 248 | 	tmp = i2c_transfer(client->adapter, ds1307->msg, 2); | 
 | 249 | 	if (tmp != 2) { | 
 | 250 | 		pr_debug("read error %d\n", tmp); | 
 | 251 | 		err = -EIO; | 
 | 252 | 		goto exit_free; | 
 | 253 | 	} | 
 | 254 |  | 
 | 255 | 	/* minimal sanity checking; some chips (like DS1340) don't | 
 | 256 | 	 * specify the extra bits as must-be-zero, but there are | 
 | 257 | 	 * still a few values that are clearly out-of-range. | 
 | 258 | 	 */ | 
 | 259 | 	tmp = ds1307->regs[DS1307_REG_SECS]; | 
 | 260 | 	if (tmp & DS1307_BIT_CH) { | 
 | 261 | 		if (ds1307->type && ds1307->type != ds_1307) { | 
 | 262 | 			pr_debug("not a ds1307?\n"); | 
 | 263 | 			goto exit_free; | 
 | 264 | 		} | 
 | 265 | 		ds1307->type = ds_1307; | 
 | 266 |  | 
 | 267 | 		/* this partial initialization should work for ds1307, | 
 | 268 | 		 * ds1338, ds1340, st m41t00, and more. | 
 | 269 | 		 */ | 
 | 270 | 		dev_warn(&client->dev, "oscillator started; SET TIME!\n"); | 
 | 271 | 		i2c_smbus_write_byte_data(client, 0, 0); | 
 | 272 | 		goto read_rtc; | 
 | 273 | 	} | 
 | 274 | 	tmp = BCD2BIN(tmp & 0x7f); | 
 | 275 | 	if (tmp > 60) | 
 | 276 | 		goto exit_free; | 
 | 277 | 	tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | 
 | 278 | 	if (tmp > 60) | 
 | 279 | 		goto exit_free; | 
 | 280 |  | 
 | 281 | 	tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | 
 | 282 | 	if (tmp == 0 || tmp > 31) | 
 | 283 | 		goto exit_free; | 
 | 284 |  | 
 | 285 | 	tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f); | 
 | 286 | 	if (tmp == 0 || tmp > 12) | 
 | 287 | 		goto exit_free; | 
 | 288 |  | 
 | 289 | 	/* force into in 24 hour mode (most chips) or | 
 | 290 | 	 * disable century bit (ds1340) | 
 | 291 | 	 */ | 
 | 292 | 	tmp = ds1307->regs[DS1307_REG_HOUR]; | 
 | 293 | 	if (tmp & (1 << 6)) { | 
 | 294 | 		if (tmp & (1 << 5)) | 
 | 295 | 			tmp = BCD2BIN(tmp & 0x1f) + 12; | 
 | 296 | 		else | 
 | 297 | 			tmp = BCD2BIN(tmp); | 
 | 298 | 		i2c_smbus_write_byte_data(client, | 
 | 299 | 				DS1307_REG_HOUR, | 
 | 300 | 				BIN2BCD(tmp)); | 
 | 301 | 	} | 
 | 302 |  | 
 | 303 | 	/* FIXME chips like 1337 can generate alarm irqs too; those are | 
 | 304 | 	 * worth exposing through the API (especially when the irq is | 
 | 305 | 	 * wakeup-capable). | 
 | 306 | 	 */ | 
 | 307 |  | 
 | 308 | 	switch (ds1307->type) { | 
 | 309 | 	case unknown: | 
 | 310 | 		strlcpy(client->name, "unknown", I2C_NAME_SIZE); | 
 | 311 | 		break; | 
 | 312 | 	case ds_1307: | 
 | 313 | 		strlcpy(client->name, "ds1307", I2C_NAME_SIZE); | 
 | 314 | 		break; | 
 | 315 | 	case ds_1337: | 
 | 316 | 		strlcpy(client->name, "ds1337", I2C_NAME_SIZE); | 
 | 317 | 		break; | 
 | 318 | 	case ds_1340: | 
 | 319 | 		strlcpy(client->name, "ds1340", I2C_NAME_SIZE); | 
 | 320 | 		break; | 
 | 321 | 	} | 
 | 322 |  | 
 | 323 | 	/* Tell the I2C layer a new client has arrived */ | 
 | 324 | 	if ((err = i2c_attach_client(client))) | 
 | 325 | 		goto exit_free; | 
 | 326 |  | 
 | 327 | 	ds1307->rtc = rtc_device_register(client->name, &client->dev, | 
 | 328 | 				&ds13xx_rtc_ops, THIS_MODULE); | 
 | 329 | 	if (IS_ERR(ds1307->rtc)) { | 
 | 330 | 		err = PTR_ERR(ds1307->rtc); | 
 | 331 | 		dev_err(&client->dev, | 
 | 332 | 			"unable to register the class device\n"); | 
 | 333 | 		goto exit_detach; | 
 | 334 | 	} | 
 | 335 |  | 
 | 336 | 	return 0; | 
 | 337 |  | 
 | 338 | exit_detach: | 
 | 339 | 	i2c_detach_client(client); | 
 | 340 | exit_free: | 
 | 341 | 	kfree(ds1307); | 
 | 342 | exit: | 
 | 343 | 	return err; | 
 | 344 | } | 
 | 345 |  | 
 | 346 | static int __devinit | 
 | 347 | ds1307_attach_adapter(struct i2c_adapter *adapter) | 
 | 348 | { | 
 | 349 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) | 
 | 350 | 		return 0; | 
 | 351 | 	return i2c_probe(adapter, &addr_data, ds1307_detect); | 
 | 352 | } | 
 | 353 |  | 
 | 354 | static int __devexit ds1307_detach_client(struct i2c_client *client) | 
 | 355 | { | 
 | 356 | 	int		err; | 
 | 357 | 	struct ds1307	*ds1307 = i2c_get_clientdata(client); | 
 | 358 |  | 
 | 359 | 	rtc_device_unregister(ds1307->rtc); | 
 | 360 | 	if ((err = i2c_detach_client(client))) | 
 | 361 | 		return err; | 
 | 362 | 	kfree(ds1307); | 
 | 363 | 	return 0; | 
 | 364 | } | 
 | 365 |  | 
 | 366 | static struct i2c_driver ds1307_driver = { | 
 | 367 | 	.driver = { | 
 | 368 | 		.name	= "ds1307", | 
 | 369 | 		.owner	= THIS_MODULE, | 
 | 370 | 	}, | 
 | 371 | 	.attach_adapter	= ds1307_attach_adapter, | 
 | 372 | 	.detach_client	= __devexit_p(ds1307_detach_client), | 
 | 373 | }; | 
 | 374 |  | 
 | 375 | static int __init ds1307_init(void) | 
 | 376 | { | 
 | 377 | 	return i2c_add_driver(&ds1307_driver); | 
 | 378 | } | 
 | 379 | module_init(ds1307_init); | 
 | 380 |  | 
 | 381 | static void __exit ds1307_exit(void) | 
 | 382 | { | 
 | 383 | 	i2c_del_driver(&ds1307_driver); | 
 | 384 | } | 
 | 385 | module_exit(ds1307_exit); | 
 | 386 |  | 
 | 387 | MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); | 
 | 388 | MODULE_LICENSE("GPL"); |