blob: f22edc66b030b4a58c09caa3952353394686ecce [file] [log] [blame]
Hannes Reineckee3a59b42007-02-07 18:19:37 +01001/*
Hannes Reineckee3a59b42007-02-07 18:19:37 +01002 * Provides ACPI support for IDE drives.
3 *
4 * Copyright (C) 2005 Intel Corp.
5 * Copyright (C) 2005 Randy Dunlap
6 * Copyright (C) 2006 SUSE Linux Products GmbH
7 * Copyright (C) 2006 Hannes Reinecke
8 */
9
10#include <linux/ata.h>
11#include <linux/delay.h>
12#include <linux/device.h>
13#include <linux/errno.h>
14#include <linux/kernel.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090015#include <linux/slab.h>
Hannes Reineckee3a59b42007-02-07 18:19:37 +010016#include <acpi/acpi.h>
17#include <linux/ide.h>
18#include <linux/pci.h>
Shaohua Li90494892008-01-10 23:03:42 +010019#include <linux/dmi.h>
Paul Gortmakerbff78322011-07-03 13:41:29 -040020#include <linux/module.h>
Hannes Reineckee3a59b42007-02-07 18:19:37 +010021
22#include <acpi/acpi_bus.h>
Hannes Reineckee3a59b42007-02-07 18:19:37 +010023
24#define REGS_PER_GTF 7
Hannes Reineckee3a59b42007-02-07 18:19:37 +010025
26struct GTM_buffer {
27 u32 PIO_speed0;
28 u32 DMA_speed0;
29 u32 PIO_speed1;
30 u32 DMA_speed1;
31 u32 GTM_flags;
32};
33
34struct ide_acpi_drive_link {
Hannes Reineckee3a59b42007-02-07 18:19:37 +010035 acpi_handle obj_handle;
36 u8 idbuff[512];
37};
38
39struct ide_acpi_hwif_link {
40 ide_hwif_t *hwif;
41 acpi_handle obj_handle;
42 struct GTM_buffer gtm;
43 struct ide_acpi_drive_link master;
44 struct ide_acpi_drive_link slave;
45};
46
47#undef DEBUGGING
48/* note: adds function name and KERN_DEBUG */
49#ifdef DEBUGGING
50#define DEBPRINT(fmt, args...) \
Harvey Harrisoneb639632008-04-26 22:25:20 +020051 printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
Hannes Reineckee3a59b42007-02-07 18:19:37 +010052#else
53#define DEBPRINT(fmt, args...) do {} while (0)
54#endif /* DEBUGGING */
55
Bartlomiej Zolnierkiewicz931ee0d2008-07-15 21:21:47 +020056static int ide_noacpi;
Bartlomiej Zolnierkiewicz1dbfeb42008-04-27 15:38:30 +020057module_param_named(noacpi, ide_noacpi, bool, 0);
58MODULE_PARM_DESC(noacpi, "disable IDE ACPI support");
59
Bartlomiej Zolnierkiewicz931ee0d2008-07-15 21:21:47 +020060static int ide_acpigtf;
Bartlomiej Zolnierkiewicz1dbfeb42008-04-27 15:38:30 +020061module_param_named(acpigtf, ide_acpigtf, bool, 0);
62MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support");
63
Bartlomiej Zolnierkiewicz931ee0d2008-07-15 21:21:47 +020064static int ide_acpionboot;
Bartlomiej Zolnierkiewicz1dbfeb42008-04-27 15:38:30 +020065module_param_named(acpionboot, ide_acpionboot, bool, 0);
66MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot");
Hannes Reineckee3a59b42007-02-07 18:19:37 +010067
Shaohua Li90494892008-01-10 23:03:42 +010068static bool ide_noacpi_psx;
69static int no_acpi_psx(const struct dmi_system_id *id)
70{
71 ide_noacpi_psx = true;
72 printk(KERN_NOTICE"%s detected - disable ACPI _PSx.\n", id->ident);
73 return 0;
74}
75
76static const struct dmi_system_id ide_acpi_dmi_table[] = {
77 /* Bug 9673. */
78 /* We should check if this is because ACPI NVS isn't save/restored. */
79 {
80 .callback = no_acpi_psx,
81 .ident = "HP nx9005",
82 .matches = {
83 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies Ltd."),
84 DMI_MATCH(DMI_BIOS_VERSION, "KAM1.60")
85 },
86 },
Jeff Garzik7c48c562008-01-10 23:59:18 -050087
88 { } /* terminate list */
Shaohua Li90494892008-01-10 23:03:42 +010089};
90
Bartlomiej Zolnierkiewicz8b803bd2009-03-24 23:22:41 +010091int ide_acpi_init(void)
Shaohua Li90494892008-01-10 23:03:42 +010092{
Shaohua Li90494892008-01-10 23:03:42 +010093 dmi_check_system(ide_acpi_dmi_table);
94 return 0;
95}
96
Bartlomiej Zolnierkiewicz2bf427b2009-06-29 19:20:42 -070097bool ide_port_acpi(ide_hwif_t *hwif)
98{
99 return ide_noacpi == 0 && hwif->acpidata;
100}
101
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100102/**
103 * ide_get_dev_handle - finds acpi_handle and PCI device.function
104 * @dev: device to locate
105 * @handle: returned acpi_handle for @dev
106 * @pcidevfn: return PCI device.func for @dev
107 *
108 * Returns the ACPI object handle to the corresponding PCI device.
109 *
110 * Returns 0 on success, <0 on error.
111 */
112static int ide_get_dev_handle(struct device *dev, acpi_handle *handle,
Lin Ming439913f2010-01-28 10:53:19 +0800113 u64 *pcidevfn)
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100114{
115 struct pci_dev *pdev = to_pci_dev(dev);
116 unsigned int bus, devnum, func;
Lin Ming439913f2010-01-28 10:53:19 +0800117 u64 addr;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100118 acpi_handle dev_handle;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100119 acpi_status status;
120 struct acpi_device_info *dinfo = NULL;
121 int ret = -ENODEV;
122
123 bus = pdev->bus->number;
124 devnum = PCI_SLOT(pdev->devfn);
125 func = PCI_FUNC(pdev->devfn);
126 /* ACPI _ADR encoding for PCI bus: */
Lin Ming439913f2010-01-28 10:53:19 +0800127 addr = (u64)(devnum << 16 | func);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100128
129 DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func);
130
131 dev_handle = DEVICE_ACPI_HANDLE(dev);
132 if (!dev_handle) {
133 DEBPRINT("no acpi handle for device\n");
134 goto err;
135 }
136
Bob Moore15b8dd52009-06-29 13:39:29 +0800137 status = acpi_get_object_info(dev_handle, &dinfo);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100138 if (ACPI_FAILURE(status)) {
139 DEBPRINT("get_object_info for device failed\n");
140 goto err;
141 }
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100142 if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
143 dinfo->address == addr) {
144 *pcidevfn = addr;
145 *handle = dev_handle;
146 } else {
147 DEBPRINT("get_object_info for device has wrong "
148 " address: %llu, should be %u\n",
149 dinfo ? (unsigned long long)dinfo->address : -1ULL,
150 (unsigned int)addr);
151 goto err;
152 }
153
154 DEBPRINT("for dev=0x%x.%x, addr=0x%llx, *handle=0x%p\n",
155 devnum, func, (unsigned long long)addr, *handle);
156 ret = 0;
157err:
158 kfree(dinfo);
159 return ret;
160}
161
162/**
163 * ide_acpi_hwif_get_handle - Get ACPI object handle for a given hwif
164 * @hwif: device to locate
165 *
166 * Retrieves the object handle for a given hwif.
167 *
168 * Returns handle on success, 0 on error.
169 */
170static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif)
171{
172 struct device *dev = hwif->gendev.parent;
Andrew Morton1dcfdf92008-02-06 02:57:49 +0100173 acpi_handle uninitialized_var(dev_handle);
Lin Ming439913f2010-01-28 10:53:19 +0800174 u64 pcidevfn;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100175 acpi_handle chan_handle;
176 int err;
177
178 DEBPRINT("ENTER: device %s\n", hwif->name);
179
180 if (!dev) {
181 DEBPRINT("no PCI device for %s\n", hwif->name);
182 return NULL;
183 }
184
185 err = ide_get_dev_handle(dev, &dev_handle, &pcidevfn);
186 if (err < 0) {
187 DEBPRINT("ide_get_dev_handle failed (%d)\n", err);
188 return NULL;
189 }
190
191 /* get child objects of dev_handle == channel objects,
192 * + _their_ children == drive objects */
193 /* channel is hwif->channel */
194 chan_handle = acpi_get_child(dev_handle, hwif->channel);
195 DEBPRINT("chan adr=%d: handle=0x%p\n",
196 hwif->channel, chan_handle);
197
198 return chan_handle;
199}
200
201/**
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100202 * do_drive_get_GTF - get the drive bootup default taskfile settings
203 * @drive: the drive for which the taskfile settings should be retrieved
204 * @gtf_length: number of bytes of _GTF data returned at @gtf_address
205 * @gtf_address: buffer containing _GTF taskfile arrays
206 *
207 * The _GTF method has no input parameters.
208 * It returns a variable number of register set values (registers
209 * hex 1F1..1F7, taskfiles).
210 * The <variable number> is not known in advance, so have ACPI-CA
211 * allocate the buffer as needed and return it, then free it later.
212 *
213 * The returned @gtf_length and @gtf_address are only valid if the
214 * function return value is 0.
215 */
216static int do_drive_get_GTF(ide_drive_t *drive,
217 unsigned int *gtf_length, unsigned long *gtf_address,
218 unsigned long *obj_loc)
219{
220 acpi_status status;
221 struct acpi_buffer output;
222 union acpi_object *out_obj;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100223 int err = -ENODEV;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100224
225 *gtf_length = 0;
226 *gtf_address = 0UL;
227 *obj_loc = 0UL;
228
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100229 if (!drive->acpidata->obj_handle) {
Bartlomiej Zolnierkiewicz8cd3c602009-03-24 23:22:41 +0100230 DEBPRINT("No ACPI object found for %s\n", drive->name);
231 goto out;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100232 }
233
234 /* Setting up output buffer */
235 output.length = ACPI_ALLOCATE_BUFFER;
236 output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
237
238 /* _GTF has no input parameters */
239 err = -EIO;
240 status = acpi_evaluate_object(drive->acpidata->obj_handle, "_GTF",
241 NULL, &output);
242 if (ACPI_FAILURE(status)) {
243 printk(KERN_DEBUG
244 "%s: Run _GTF error: status = 0x%x\n",
Harvey Harrisoneb639632008-04-26 22:25:20 +0200245 __func__, status);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100246 goto out;
247 }
248
249 if (!output.length || !output.pointer) {
250 DEBPRINT("Run _GTF: "
251 "length or ptr is NULL (0x%llx, 0x%p)\n",
252 (unsigned long long)output.length,
253 output.pointer);
254 goto out;
255 }
256
257 out_obj = output.pointer;
258 if (out_obj->type != ACPI_TYPE_BUFFER) {
259 DEBPRINT("Run _GTF: error: "
260 "expected object type of ACPI_TYPE_BUFFER, "
261 "got 0x%x\n", out_obj->type);
262 err = -ENOENT;
263 kfree(output.pointer);
264 goto out;
265 }
266
267 if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
268 out_obj->buffer.length % REGS_PER_GTF) {
269 printk(KERN_ERR
270 "%s: unexpected GTF length (%d) or addr (0x%p)\n",
Harvey Harrisoneb639632008-04-26 22:25:20 +0200271 __func__, out_obj->buffer.length,
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100272 out_obj->buffer.pointer);
273 err = -ENOENT;
274 kfree(output.pointer);
275 goto out;
276 }
277
278 *gtf_length = out_obj->buffer.length;
279 *gtf_address = (unsigned long)out_obj->buffer.pointer;
280 *obj_loc = (unsigned long)out_obj;
281 DEBPRINT("returning gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
282 *gtf_length, *gtf_address, *obj_loc);
283 err = 0;
284out:
285 return err;
286}
287
288/**
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100289 * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
290 * @drive: the drive to which the taskfile command should be sent
291 * @gtf_length: total number of bytes of _GTF taskfiles
292 * @gtf_address: location of _GTF taskfile arrays
293 *
294 * Write {gtf_address, length gtf_length} in groups of
295 * REGS_PER_GTF bytes.
296 */
297static int do_drive_set_taskfiles(ide_drive_t *drive,
298 unsigned int gtf_length,
299 unsigned long gtf_address)
300{
Bartlomiej Zolnierkiewicz1f5892a2009-03-24 23:22:42 +0100301 int rc = 0, err;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100302 int gtf_count = gtf_length / REGS_PER_GTF;
303 int ix;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100304
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100305 DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n",
306 gtf_length, gtf_length, gtf_count, gtf_address);
307
Bartlomiej Zolnierkiewiczb0b39142009-03-24 23:22:42 +0100308 /* send all taskfile registers (0x1f1-0x1f7) *in*that*order* */
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100309 for (ix = 0; ix < gtf_count; ix++) {
Bartlomiej Zolnierkiewiczb0b39142009-03-24 23:22:42 +0100310 u8 *gtf = (u8 *)(gtf_address + ix * REGS_PER_GTF);
Bartlomiej Zolnierkiewicz22aa4b32009-03-27 12:46:37 +0100311 struct ide_cmd cmd;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100312
Bartlomiej Zolnierkiewiczb0b39142009-03-24 23:22:42 +0100313 DEBPRINT("(0x1f1-1f7): "
314 "hex: %02x %02x %02x %02x %02x %02x %02x\n",
315 gtf[0], gtf[1], gtf[2],
316 gtf[3], gtf[4], gtf[5], gtf[6]);
317
318 if (!ide_acpigtf) {
319 DEBPRINT("_GTF execution disabled\n");
320 continue;
321 }
322
323 /* convert GTF to taskfile */
Bartlomiej Zolnierkiewicz22aa4b32009-03-27 12:46:37 +0100324 memset(&cmd, 0, sizeof(cmd));
Sergei Shtylyov745483f2009-04-08 14:13:02 +0200325 memcpy(&cmd.tf.feature, gtf, REGS_PER_GTF);
Sergei Shtylyov60f85012009-04-08 14:13:01 +0200326 cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
327 cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
Bartlomiej Zolnierkiewiczb0b39142009-03-24 23:22:42 +0100328
Bartlomiej Zolnierkiewicz22aa4b32009-03-27 12:46:37 +0100329 err = ide_no_data_taskfile(drive, &cmd);
Bartlomiej Zolnierkiewiczb0b39142009-03-24 23:22:42 +0100330 if (err) {
331 printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n",
332 __func__, err);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100333 rc = err;
Bartlomiej Zolnierkiewiczb0b39142009-03-24 23:22:42 +0100334 }
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100335 }
336
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100337 return rc;
338}
339
340/**
341 * ide_acpi_exec_tfs - get then write drive taskfile settings
342 * @drive: the drive for which the taskfile settings should be
343 * written.
344 *
345 * According to the ACPI spec this should be called after _STM
346 * has been evaluated for the interface. Some ACPI vendors interpret
347 * that as a hard requirement and modify the taskfile according
348 * to the Identify Drive information passed down with _STM.
349 * So one should really make sure to call this only after _STM has
350 * been executed.
351 */
352int ide_acpi_exec_tfs(ide_drive_t *drive)
353{
354 int ret;
355 unsigned int gtf_length;
356 unsigned long gtf_address;
357 unsigned long obj_loc;
358
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100359 DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
360
361 ret = do_drive_get_GTF(drive, &gtf_length, &gtf_address, &obj_loc);
362 if (ret < 0) {
363 DEBPRINT("get_GTF error (%d)\n", ret);
364 return ret;
365 }
366
367 DEBPRINT("call set_taskfiles, drive=%s\n", drive->name);
368
369 ret = do_drive_set_taskfiles(drive, gtf_length, gtf_address);
370 kfree((void *)obj_loc);
371 if (ret < 0) {
372 DEBPRINT("set_taskfiles error (%d)\n", ret);
373 }
374
375 DEBPRINT("ret=%d\n", ret);
376
377 return ret;
378}
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100379
380/**
381 * ide_acpi_get_timing - get the channel (controller) timings
382 * @hwif: target IDE interface (channel)
383 *
384 * This function executes the _GTM ACPI method for the target channel.
385 *
386 */
387void ide_acpi_get_timing(ide_hwif_t *hwif)
388{
389 acpi_status status;
390 struct acpi_buffer output;
391 union acpi_object *out_obj;
392
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100393 /* Setting up output buffer for _GTM */
394 output.length = ACPI_ALLOCATE_BUFFER;
395 output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
396
397 /* _GTM has no input parameters */
398 status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_GTM",
399 NULL, &output);
400
401 DEBPRINT("_GTM status: %d, outptr: 0x%p, outlen: 0x%llx\n",
402 status, output.pointer,
403 (unsigned long long)output.length);
404
405 if (ACPI_FAILURE(status)) {
406 DEBPRINT("Run _GTM error: status = 0x%x\n", status);
407 return;
408 }
409
410 if (!output.length || !output.pointer) {
411 DEBPRINT("Run _GTM: length or ptr is NULL (0x%llx, 0x%p)\n",
412 (unsigned long long)output.length,
413 output.pointer);
414 kfree(output.pointer);
415 return;
416 }
417
418 out_obj = output.pointer;
419 if (out_obj->type != ACPI_TYPE_BUFFER) {
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100420 DEBPRINT("Run _GTM: error: "
421 "expected object type of ACPI_TYPE_BUFFER, "
422 "got 0x%x\n", out_obj->type);
Mariusz Kozlowskiba578732010-11-22 11:37:21 -0800423 kfree(output.pointer);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100424 return;
425 }
426
427 if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
428 out_obj->buffer.length != sizeof(struct GTM_buffer)) {
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100429 printk(KERN_ERR
Andrew Morton1e8f34f2007-02-07 18:19:42 +0100430 "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or "
431 "addr (0x%p)\n",
Harvey Harrisoneb639632008-04-26 22:25:20 +0200432 __func__, out_obj->buffer.length,
Andrew Morton1e8f34f2007-02-07 18:19:42 +0100433 sizeof(struct GTM_buffer), out_obj->buffer.pointer);
Mariusz Kozlowskiba578732010-11-22 11:37:21 -0800434 kfree(output.pointer);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100435 return;
436 }
437
438 memcpy(&hwif->acpidata->gtm, out_obj->buffer.pointer,
439 sizeof(struct GTM_buffer));
440
441 DEBPRINT("_GTM info: ptr: 0x%p, len: 0x%x, exp.len: 0x%Zx\n",
442 out_obj->buffer.pointer, out_obj->buffer.length,
443 sizeof(struct GTM_buffer));
444
445 DEBPRINT("_GTM fields: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
446 hwif->acpidata->gtm.PIO_speed0,
447 hwif->acpidata->gtm.DMA_speed0,
448 hwif->acpidata->gtm.PIO_speed1,
449 hwif->acpidata->gtm.DMA_speed1,
450 hwif->acpidata->gtm.GTM_flags);
451
452 kfree(output.pointer);
453}
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100454
455/**
456 * ide_acpi_push_timing - set the channel (controller) timings
457 * @hwif: target IDE interface (channel)
458 *
459 * This function executes the _STM ACPI method for the target channel.
460 *
461 * _STM requires Identify Drive data, which has to passed as an argument.
Bartlomiej Zolnierkiewicz4dde4492008-10-10 22:39:19 +0200462 * Unfortunately drive->id is a mangled version which we can't readily
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100463 * use; hence we'll get the information afresh.
464 */
465void ide_acpi_push_timing(ide_hwif_t *hwif)
466{
467 acpi_status status;
468 struct acpi_object_list input;
469 union acpi_object in_params[3];
470 struct ide_acpi_drive_link *master = &hwif->acpidata->master;
471 struct ide_acpi_drive_link *slave = &hwif->acpidata->slave;
472
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100473 /* Give the GTM buffer + drive Identify data to the channel via the
474 * _STM method: */
475 /* setup input parameters buffer for _STM */
476 input.count = 3;
477 input.pointer = in_params;
478 in_params[0].type = ACPI_TYPE_BUFFER;
479 in_params[0].buffer.length = sizeof(struct GTM_buffer);
480 in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm;
481 in_params[1].type = ACPI_TYPE_BUFFER;
Bartlomiej Zolnierkiewicz0e63a582008-12-29 20:27:29 +0100482 in_params[1].buffer.length = ATA_ID_WORDS * 2;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100483 in_params[1].buffer.pointer = (u8 *)&master->idbuff;
484 in_params[2].type = ACPI_TYPE_BUFFER;
Bartlomiej Zolnierkiewicz0e63a582008-12-29 20:27:29 +0100485 in_params[2].buffer.length = ATA_ID_WORDS * 2;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100486 in_params[2].buffer.pointer = (u8 *)&slave->idbuff;
487 /* Output buffer: _STM has no output */
488
489 status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_STM",
490 &input, NULL);
491
492 if (ACPI_FAILURE(status)) {
493 DEBPRINT("Run _STM error: status = 0x%x\n", status);
494 }
495 DEBPRINT("_STM status: %d\n", status);
496}
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100497
498/**
Shaohua Li5e321322007-10-11 23:53:58 +0200499 * ide_acpi_set_state - set the channel power state
500 * @hwif: target IDE interface
501 * @on: state, on/off
502 *
503 * This function executes the _PS0/_PS3 ACPI method to set the power state.
504 * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
505 */
506void ide_acpi_set_state(ide_hwif_t *hwif, int on)
507{
Bartlomiej Zolnierkiewicz2bd24a12009-01-06 17:20:56 +0100508 ide_drive_t *drive;
509 int i;
Shaohua Li5e321322007-10-11 23:53:58 +0200510
Bartlomiej Zolnierkiewicz2bf427b2009-06-29 19:20:42 -0700511 if (ide_noacpi_psx)
Shaohua Li5e321322007-10-11 23:53:58 +0200512 return;
513
514 DEBPRINT("ENTER:\n");
515
Shaohua Li5e321322007-10-11 23:53:58 +0200516 /* channel first and then drives for power on and verse versa for power off */
517 if (on)
518 acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
Shaohua Li5e321322007-10-11 23:53:58 +0200519
Bartlomiej Zolnierkiewicz7ed5b152009-03-24 23:22:41 +0100520 ide_port_for_each_present_dev(i, drive, hwif) {
521 if (drive->acpidata->obj_handle)
Shaohua Li5e321322007-10-11 23:53:58 +0200522 acpi_bus_set_power(drive->acpidata->obj_handle,
Bartlomiej Zolnierkiewicz7ed5b152009-03-24 23:22:41 +0100523 on ? ACPI_STATE_D0 : ACPI_STATE_D3);
Shaohua Li5e321322007-10-11 23:53:58 +0200524 }
Bartlomiej Zolnierkiewicz7ed5b152009-03-24 23:22:41 +0100525
Shaohua Li5e321322007-10-11 23:53:58 +0200526 if (!on)
527 acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3);
528}
Shaohua Li5e321322007-10-11 23:53:58 +0200529
530/**
Bartlomiej Zolnierkiewicz8b803bd2009-03-24 23:22:41 +0100531 * ide_acpi_init_port - initialize the ACPI link for an IDE interface
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100532 * @hwif: target IDE interface (channel)
533 *
534 * The ACPI spec is not quite clear when the drive identify buffer
535 * should be obtained. Calling IDENTIFY DEVICE during shutdown
536 * is not the best of ideas as the drive might already being put to
537 * sleep. And obviously we can't call it during resume.
538 * So we get the information during startup; but this means that
539 * any changes during run-time will be lost after resume.
540 */
Bartlomiej Zolnierkiewicz8b803bd2009-03-24 23:22:41 +0100541void ide_acpi_init_port(ide_hwif_t *hwif)
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100542{
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100543 hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
544 if (!hwif->acpidata)
545 return;
546
547 hwif->acpidata->obj_handle = ide_acpi_hwif_get_handle(hwif);
548 if (!hwif->acpidata->obj_handle) {
549 DEBPRINT("no ACPI object for %s found\n", hwif->name);
550 kfree(hwif->acpidata);
551 hwif->acpidata = NULL;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100552 }
Bartlomiej Zolnierkiewiczeafd88a2008-02-02 19:56:43 +0100553}
554
555void ide_acpi_port_init_devices(ide_hwif_t *hwif)
556{
557 ide_drive_t *drive;
558 int i, err;
559
560 if (hwif->acpidata == NULL)
561 return;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100562
563 /*
564 * The ACPI spec mandates that we send information
565 * for both drives, regardless whether they are connected
566 * or not.
567 */
Bartlomiej Zolnierkiewicz5e7f3a42009-01-06 17:20:56 +0100568 hwif->devices[0]->acpidata = &hwif->acpidata->master;
569 hwif->devices[1]->acpidata = &hwif->acpidata->slave;
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100570
Bartlomiej Zolnierkiewicz8cd3c602009-03-24 23:22:41 +0100571 /* get _ADR info for each device */
Bartlomiej Zolnierkiewicz7ed5b152009-03-24 23:22:41 +0100572 ide_port_for_each_present_dev(i, drive, hwif) {
Bartlomiej Zolnierkiewicz8cd3c602009-03-24 23:22:41 +0100573 acpi_handle dev_handle;
574
Bartlomiej Zolnierkiewicz8cd3c602009-03-24 23:22:41 +0100575 DEBPRINT("ENTER: %s at channel#: %d port#: %d\n",
576 drive->name, hwif->channel, drive->dn & 1);
577
578 /* TBD: could also check ACPI object VALID bits */
579 dev_handle = acpi_get_child(hwif->acpidata->obj_handle,
580 drive->dn & 1);
581
582 DEBPRINT("drive %s handle 0x%p\n", drive->name, dev_handle);
583
584 drive->acpidata->obj_handle = dev_handle;
585 }
586
Bartlomiej Zolnierkiewicz7ed5b152009-03-24 23:22:41 +0100587 /* send IDENTIFY for each device */
588 ide_port_for_each_present_dev(i, drive, hwif) {
Bartlomiej Zolnierkiewiczeafd88a2008-02-02 19:56:43 +0100589 err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
590 if (err)
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100591 DEBPRINT("identify device %s failed (%d)\n",
Bartlomiej Zolnierkiewiczeafd88a2008-02-02 19:56:43 +0100592 drive->name, err);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100593 }
594
Bartlomiej Zolnierkiewicz2bf427b2009-06-29 19:20:42 -0700595 if (ide_noacpi || ide_acpionboot == 0) {
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100596 DEBPRINT("ACPI methods disabled on boot\n");
597 return;
598 }
599
Shaohua Li5e321322007-10-11 23:53:58 +0200600 /* ACPI _PS0 before _STM */
601 ide_acpi_set_state(hwif, 1);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100602 /*
603 * ACPI requires us to call _STM on startup
604 */
605 ide_acpi_get_timing(hwif);
606 ide_acpi_push_timing(hwif);
607
Bartlomiej Zolnierkiewicz7ed5b152009-03-24 23:22:41 +0100608 ide_port_for_each_present_dev(i, drive, hwif) {
609 ide_acpi_exec_tfs(drive);
Hannes Reineckee3a59b42007-02-07 18:19:37 +0100610 }
611}