Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / c2f12589bfc4119f2c331ecea8cca4945ed48497 / . / drivers / net / saa9730.h
blob: 9e9da6b4080fa2ab27b5961d4af9ae1e9761e0da [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1/*
2 * Carsten Langgaard, carstenl@mips.com
3 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
4 *
5 * ########################################################################
6 *
7 * This program is free software; you can distribute it and/or modify it
8 * under the terms of the GNU General Public License (Version 2) as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 * for more details.
15 *
16 * You should have received a copy of the GNU General Public License along
17 * with this program; if not, write to the Free Software Foundation, Inc.,
18 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
19 *
20 * ########################################################################
21 *
22 * SAA9730 ethernet driver description.
23 *
24 */
25#ifndef _SAA9730_H
26#define _SAA9730_H
27
28
29/* Number of 6-byte entries in the CAM. */
30#define LAN_SAA9730_CAM_ENTRIES 10
31#define LAN_SAA9730_CAM_DWORDS ((LAN_SAA9730_CAM_ENTRIES*6)/4)
32
33/* TX and RX packet size: fixed to 2048 bytes, according to HW requirements. */
34#define LAN_SAA9730_PACKET_SIZE 2048
35
36/*
37 * Number of TX buffers = number of RX buffers = 2, which is fixed according
38 * to HW requirements.
39 */
40#define LAN_SAA9730_BUFFERS 2
41
42/* Number of RX packets per RX buffer. */
43#define LAN_SAA9730_RCV_Q_SIZE 15
44
45/* Number of TX packets per TX buffer. */
46#define LAN_SAA9730_TXM_Q_SIZE 15
47
48/*
49 * We get an interrupt for each LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
50 * packets received.
51 * If however we receive less than LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
52 * packets, the hardware can timeout after a certain time and still tell
53 * us packets have arrived.
54 * The timeout value in unit of 32 PCI clocks (33Mhz).
55 * The value 200 approximates 0.0002 seconds.
56 */
57#define LAN_SAA9730_RCV_Q_INT_THRESHOLD 1
58#define LAN_SAA9730_DEFAULT_TIME_OUT_CNT 10
59
60#define RXSF_NDIS 0
61#define RXSF_READY 2
62#define RXSF_HWDONE 3
63
64#define TXSF_EMPTY 0
65#define TXSF_READY 2
66#define TXSF_HWDONE 3
67
68#define LANEND_LITTLE 0
69#define LANEND_BIG_2143 1
70#define LANEND_BIG_4321 2
71
72#define LANMB_ANY 0
73#define LANMB_8 1
74#define LANMB_32 2
75#define LANMB_64 3
76
77#define MACCM_AUTOMATIC 0
78#define MACCM_10MB 1
79#define MACCM_MII 2
80
81/*
82 * PHY definitions for Basic registers of QS6612 (used on MIPS ATLAS board)
83 */
84#define PHY_CONTROL 0x0
85#define PHY_STATUS 0x1
86#define PHY_STATUS_LINK_UP 0x4
87#define PHY_CONTROL_RESET 0x8000
88#define PHY_CONTROL_AUTO_NEG 0x1000
89#define PHY_CONTROL_RESTART_AUTO_NEG 0x0200
90#define PHY_ADDRESS 0x0
91
92/* PK_COUNT register. */
93#define PK_COUNT_TX_A_SHF 24
94#define PK_COUNT_TX_A_MSK (0xff << PK_COUNT_TX_A_SHF)
95#define PK_COUNT_TX_B_SHF 16
96#define PK_COUNT_TX_B_MSK (0xff << PK_COUNT_TX_B_SHF)
97#define PK_COUNT_RX_A_SHF 8
98#define PK_COUNT_RX_A_MSK (0xff << PK_COUNT_RX_A_SHF)
99#define PK_COUNT_RX_B_SHF 0
100#define PK_COUNT_RX_B_MSK (0xff << PK_COUNT_RX_B_SHF)
101
102/* OK2USE register. */
103#define OK2USE_TX_A 0x8
104#define OK2USE_TX_B 0x4
105#define OK2USE_RX_A 0x2
106#define OK2USE_RX_B 0x1
107
108/* LAN DMA CONTROL register. */
109#define DMA_CTL_BLK_INT 0x80000000
110#define DMA_CTL_MAX_XFER_SHF 18
111#define DMA_CTL_MAX_XFER_MSK (0x3 << LAN_DMA_CTL_MAX_XFER_SHF)
112#define DMA_CTL_ENDIAN_SHF 16
113#define DMA_CTL_ENDIAN_MSK (0x3 << LAN_DMA_CTL_ENDIAN_SHF)
114#define DMA_CTL_RX_INT_COUNT_SHF 8
115#define DMA_CTL_RX_INT_COUNT_MSK (0xff << LAN_DMA_CTL_RX_INT_COUNT_SHF)
116#define DMA_CTL_EN_TX_DMA 0x00000080
117#define DMA_CTL_EN_RX_DMA 0x00000040
118#define DMA_CTL_RX_INT_BUFFUL_EN 0x00000020
119#define DMA_CTL_RX_INT_TO_EN 0x00000010
120#define DMA_CTL_RX_INT_EN 0x00000008
121#define DMA_CTL_TX_INT_EN 0x00000004
122#define DMA_CTL_MAC_TX_INT_EN 0x00000002
123#define DMA_CTL_MAC_RX_INT_EN 0x00000001
124
125/* DMA STATUS register. */
126#define DMA_STATUS_BAD_ADDR_SHF 16
127#define DMA_STATUS_BAD_ADDR_MSK (0xf << DMA_STATUS_BAD_ADDR_SHF)
128#define DMA_STATUS_RX_PKTS_RECEIVED_SHF 8
129#define DMA_STATUS_RX_PKTS_RECEIVED_MSK (0xff << DMA_STATUS_RX_PKTS_RECEIVED_SHF)
130#define DMA_STATUS_TX_EN_SYNC 0x00000080
131#define DMA_STATUS_RX_BUF_A_FUL 0x00000040
132#define DMA_STATUS_RX_BUF_B_FUL 0x00000020
133#define DMA_STATUS_RX_TO_INT 0x00000010
134#define DMA_STATUS_RX_INT 0x00000008
135#define DMA_STATUS_TX_INT 0x00000004
136#define DMA_STATUS_MAC_TX_INT 0x00000002
137#define DMA_STATUS_MAC_RX_INT 0x00000001
138
139/* DMA TEST/PANIC SWITHES register. */
140#define DMA_TEST_LOOPBACK 0x01000000
141#define DMA_TEST_SW_RESET 0x00000001
142
143/* MAC CONTROL register. */
144#define MAC_CONTROL_EN_MISS_ROLL 0x00002000
145#define MAC_CONTROL_MISS_ROLL 0x00000400
146#define MAC_CONTROL_LOOP10 0x00000080
147#define MAC_CONTROL_CONN_SHF 5
148#define MAC_CONTROL_CONN_MSK (0x3 << MAC_CONTROL_CONN_SHF)
149#define MAC_CONTROL_MAC_LOOP 0x00000010
150#define MAC_CONTROL_FULL_DUP 0x00000008
151#define MAC_CONTROL_RESET 0x00000004
152#define MAC_CONTROL_HALT_IMM 0x00000002
153#define MAC_CONTROL_HALT_REQ 0x00000001
154
155/* CAM CONTROL register. */
156#define CAM_CONTROL_COMP_EN 0x00000010
157#define CAM_CONTROL_NEG_CAM 0x00000008
158#define CAM_CONTROL_BROAD_ACC 0x00000004
159#define CAM_CONTROL_GROUP_ACC 0x00000002
160#define CAM_CONTROL_STATION_ACC 0x00000001
161
162/* TRANSMIT CONTROL register. */
163#define TX_CTL_EN_COMP 0x00004000
164#define TX_CTL_EN_TX_PAR 0x00002000
165#define TX_CTL_EN_LATE_COLL 0x00001000
166#define TX_CTL_EN_EX_COLL 0x00000800
167#define TX_CTL_EN_L_CARR 0x00000400
168#define TX_CTL_EN_EX_DEFER 0x00000200
169#define TX_CTL_EN_UNDER 0x00000100
170#define TX_CTL_MII10 0x00000080
171#define TX_CTL_SD_PAUSE 0x00000040
172#define TX_CTL_NO_EX_DEF0 0x00000020
173#define TX_CTL_F_BACK 0x00000010
174#define TX_CTL_NO_CRC 0x00000008
175#define TX_CTL_NO_PAD 0x00000004
176#define TX_CTL_TX_HALT 0x00000002
177#define TX_CTL_TX_EN 0x00000001
178
179/* TRANSMIT STATUS register. */
180#define TX_STATUS_SQ_ERR 0x00010000
181#define TX_STATUS_TX_HALTED 0x00008000
182#define TX_STATUS_COMP 0x00004000
183#define TX_STATUS_TX_PAR 0x00002000
184#define TX_STATUS_LATE_COLL 0x00001000
185#define TX_STATUS_TX10_STAT 0x00000800
186#define TX_STATUS_L_CARR 0x00000400
187#define TX_STATUS_EX_DEFER 0x00000200
188#define TX_STATUS_UNDER 0x00000100
189#define TX_STATUS_IN_TX 0x00000080
190#define TX_STATUS_PAUSED 0x00000040
191#define TX_STATUS_TX_DEFERRED 0x00000020
192#define TX_STATUS_EX_COLL 0x00000010
193#define TX_STATUS_TX_COLL_SHF 0
194#define TX_STATUS_TX_COLL_MSK (0xf << TX_STATUS_TX_COLL_SHF)
195
196/* RECEIVE CONTROL register. */
197#define RX_CTL_EN_GOOD 0x00004000
198#define RX_CTL_EN_RX_PAR 0x00002000
199#define RX_CTL_EN_LONG_ERR 0x00000800
200#define RX_CTL_EN_OVER 0x00000400
201#define RX_CTL_EN_CRC_ERR 0x00000200
202#define RX_CTL_EN_ALIGN 0x00000100
203#define RX_CTL_IGNORE_CRC 0x00000040
204#define RX_CTL_PASS_CTL 0x00000020
205#define RX_CTL_STRIP_CRC 0x00000010
206#define RX_CTL_SHORT_EN 0x00000008
207#define RX_CTL_LONG_EN 0x00000004
208#define RX_CTL_RX_HALT 0x00000002
209#define RX_CTL_RX_EN 0x00000001
210
211/* RECEIVE STATUS register. */
212#define RX_STATUS_RX_HALTED 0x00008000
213#define RX_STATUS_GOOD 0x00004000
214#define RX_STATUS_RX_PAR 0x00002000
215#define RX_STATUS_LONG_ERR 0x00000800
216#define RX_STATUS_OVERFLOW 0x00000400
217#define RX_STATUS_CRC_ERR 0x00000200
218#define RX_STATUS_ALIGN_ERR 0x00000100
219#define RX_STATUS_RX10_STAT 0x00000080
220#define RX_STATUS_INT_RX 0x00000040
221#define RX_STATUS_CTL_RECD 0x00000020
222
223/* MD_CA register. */
224#define MD_CA_PRE_SUP 0x00001000
225#define MD_CA_BUSY 0x00000800
226#define MD_CA_WR 0x00000400
227#define MD_CA_PHY_SHF 5
228#define MD_CA_PHY_MSK (0x1f << MD_CA_PHY_SHF)
229#define MD_CA_ADDR_SHF 0
230#define MD_CA_ADDR_MSK (0x1f << MD_CA_ADDR_SHF)
231
232/* Tx Status/Control. */
233#define TX_STAT_CTL_OWNER_SHF 30
234#define TX_STAT_CTL_OWNER_MSK (0x3 << TX_STAT_CTL_OWNER_SHF)
235#define TX_STAT_CTL_FRAME_SHF 27
236#define TX_STAT_CTL_FRAME_MSK (0x7 << TX_STAT_CTL_FRAME_SHF)
237#define TX_STAT_CTL_STATUS_SHF 11
238#define TX_STAT_CTL_STATUS_MSK (0x1ffff << TX_STAT_CTL_STATUS_SHF)
239#define TX_STAT_CTL_LENGTH_SHF 0
240#define TX_STAT_CTL_LENGTH_MSK (0x7ff << TX_STAT_CTL_LENGTH_SHF)
241
242#define TX_STAT_CTL_ERROR_MSK ((TX_STATUS_SQ_ERR | \
243 TX_STATUS_TX_HALTED | \
244 TX_STATUS_TX_PAR | \
245 TX_STATUS_LATE_COLL | \
246 TX_STATUS_L_CARR | \
247 TX_STATUS_EX_DEFER | \
248 TX_STATUS_UNDER | \
249 TX_STATUS_PAUSED | \
250 TX_STATUS_TX_DEFERRED | \
251 TX_STATUS_EX_COLL | \
252 TX_STATUS_TX_COLL_MSK) \
253 << TX_STAT_CTL_STATUS_SHF)
254#define TX_STAT_CTL_INT_AFTER_TX 0x4
255
256/* Rx Status/Control. */
257#define RX_STAT_CTL_OWNER_SHF 30
258#define RX_STAT_CTL_OWNER_MSK (0x3 << RX_STAT_CTL_OWNER_SHF)
259#define RX_STAT_CTL_STATUS_SHF 11
260#define RX_STAT_CTL_STATUS_MSK (0xffff << RX_STAT_CTL_STATUS_SHF)
261#define RX_STAT_CTL_LENGTH_SHF 0
262#define RX_STAT_CTL_LENGTH_MSK (0x7ff << RX_STAT_CTL_LENGTH_SHF)
263
264
265
266/* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
267#define SAA9730_LAN_REGS_ADDR 0x20400
268
269struct lan_saa9730_regmap {
270 volatile unsigned int TxBuffA; /* 0x20400 */
271 volatile unsigned int TxBuffB; /* 0x20404 */
272 volatile unsigned int RxBuffA; /* 0x20408 */
273 volatile unsigned int RxBuffB; /* 0x2040c */
274 volatile unsigned int PacketCount; /* 0x20410 */
275 volatile unsigned int Ok2Use; /* 0x20414 */
276 volatile unsigned int LanDmaCtl; /* 0x20418 */
277 volatile unsigned int Timeout; /* 0x2041c */
278 volatile unsigned int DmaStatus; /* 0x20420 */
279 volatile unsigned int DmaTest; /* 0x20424 */
280 volatile unsigned char filler20428[0x20430 - 0x20428];
281 volatile unsigned int PauseCount; /* 0x20430 */
282 volatile unsigned int RemotePauseCount; /* 0x20434 */
283 volatile unsigned char filler20438[0x20440 - 0x20438];
284 volatile unsigned int MacCtl; /* 0x20440 */
285 volatile unsigned int CamCtl; /* 0x20444 */
286 volatile unsigned int TxCtl; /* 0x20448 */
287 volatile unsigned int TxStatus; /* 0x2044c */
288 volatile unsigned int RxCtl; /* 0x20450 */
289 volatile unsigned int RxStatus; /* 0x20454 */
290 volatile unsigned int StationMgmtData; /* 0x20458 */
291 volatile unsigned int StationMgmtCtl; /* 0x2045c */
292 volatile unsigned int CamAddress; /* 0x20460 */
293 volatile unsigned int CamData; /* 0x20464 */
294 volatile unsigned int CamEnable; /* 0x20468 */
295 volatile unsigned char filler2046c[0x20500 - 0x2046c];
296 volatile unsigned int DebugPCIMasterAddr; /* 0x20500 */
297 volatile unsigned int DebugLanTxStateMachine; /* 0x20504 */
298 volatile unsigned int DebugLanRxStateMachine; /* 0x20508 */
299 volatile unsigned int DebugLanTxFifoPointers; /* 0x2050c */
300 volatile unsigned int DebugLanRxFifoPointers; /* 0x20510 */
301 volatile unsigned int DebugLanCtlStateMachine; /* 0x20514 */
302};
303typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;
304
305
306/* EVM interrupt control registers. */
307#define EVM_LAN_INT 0x00010000
308#define EVM_MASTER_EN 0x00000001
309
310/* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
311#define SAA9730_EVM_REGS_ADDR 0x02000
312
313struct evm_saa9730_regmap {
314 volatile unsigned int InterruptStatus1; /* 0x2000 */
315 volatile unsigned int InterruptEnable1; /* 0x2004 */
316 volatile unsigned int InterruptMonitor1; /* 0x2008 */
317 volatile unsigned int Counter; /* 0x200c */
318 volatile unsigned int CounterThreshold; /* 0x2010 */
319 volatile unsigned int CounterControl; /* 0x2014 */
320 volatile unsigned int GpioControl1; /* 0x2018 */
321 volatile unsigned int InterruptStatus2; /* 0x201c */
322 volatile unsigned int InterruptEnable2; /* 0x2020 */
323 volatile unsigned int InterruptMonitor2; /* 0x2024 */
324 volatile unsigned int GpioControl2; /* 0x2028 */
325 volatile unsigned int InterruptBlock1; /* 0x202c */
326 volatile unsigned int InterruptBlock2; /* 0x2030 */
327};
328typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;
329
330
331struct lan_saa9730_private {
332 /* Pointer for the SAA9730 LAN controller register set. */
333 t_lan_saa9730_regmap *lan_saa9730_regs;
334
335 /* Pointer to the SAA9730 EVM register. */
336 t_evm_saa9730_regmap *evm_saa9730_regs;
337
338 /* TRUE if the next buffer to write is RxBuffA, FALSE if RxBuffB. */
339 unsigned char NextRcvToUseIsA;
340 /* Rcv buffer Index. */
341 unsigned char NextRcvPacketIndex;
342
343 /* Index of next packet to use in that buffer. */
344 unsigned char NextTxmPacketIndex;
345 /* Next buffer index. */
346 unsigned char NextTxmBufferIndex;
347
348 /* Index of first pending packet ready to send. */
349 unsigned char PendingTxmPacketIndex;
350 /* Pending buffer index. */
351 unsigned char PendingTxmBufferIndex;
352
353 unsigned char DmaRcvPackets;
354 unsigned char DmaTxmPackets;
355
356 unsigned char RcvAIndex; /* index into RcvBufferSpace[] for Blk A */
357 unsigned char RcvBIndex; /* index into RcvBufferSpace[] for Blk B */
358
359 unsigned int
360 TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
361 unsigned int
362 RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
363 unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];
364
365 unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];
366
367 struct net_device_stats stats;
368 spinlock_t lock;
369};
370
371#endif /* _SAA9730_H */