blob: 94256fe7bf36de35556421d2a1d04ace98b3e59c [file] [log] [blame]
David Brownelle9d359472008-10-20 23:51:46 +02001/*
Grant Likelyc103de22011-06-04 18:38:28 -06002 * Access to GPIOs on TWL4030/TPS659x0 chips
David Brownelle9d359472008-10-20 23:51:46 +02003 *
4 * Copyright (C) 2006-2007 Texas Instruments, Inc.
5 * Copyright (C) 2006 MontaVista Software, Inc.
6 *
7 * Code re-arranged and cleaned up by:
8 * Syed Mohammed Khasim <x0khasim@ti.com>
9 *
10 * Initial Code:
11 * Andy Lowe / Nishanth Menon
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26 */
27
28#include <linux/module.h>
29#include <linux/init.h>
30#include <linux/interrupt.h>
31#include <linux/kthread.h>
32#include <linux/irq.h>
33#include <linux/gpio.h>
34#include <linux/platform_device.h>
Benoit Coussonb8589e22012-02-29 22:51:32 +010035#include <linux/of.h>
36#include <linux/irqdomain.h>
David Brownelle9d359472008-10-20 23:51:46 +020037
Santosh Shilimkarb07682b2009-12-13 20:05:51 +010038#include <linux/i2c/twl.h>
David Brownelle9d359472008-10-20 23:51:46 +020039
40
41/*
42 * The GPIO "subchip" supports 18 GPIOs which can be configured as
43 * inputs or outputs, with pullups or pulldowns on each pin. Each
44 * GPIO can trigger interrupts on either or both edges.
45 *
46 * GPIO interrupts can be fed to either of two IRQ lines; this is
47 * intended to support multiple hosts.
48 *
49 * There are also two LED pins used sometimes as output-only GPIOs.
50 */
51
52
53static struct gpio_chip twl_gpiochip;
54static int twl4030_gpio_irq_base;
55
56/* genirq interfaces are not available to modules */
57#ifdef MODULE
58#define is_module() true
59#else
60#define is_module() false
61#endif
62
63/* GPIO_CTRL Fields */
64#define MASK_GPIO_CTRL_GPIO0CD1 BIT(0)
65#define MASK_GPIO_CTRL_GPIO1CD2 BIT(1)
66#define MASK_GPIO_CTRL_GPIO_ON BIT(2)
67
68/* Mask for GPIO registers when aggregated into a 32-bit integer */
69#define GPIO_32_MASK 0x0003ffff
70
71/* Data structures */
72static DEFINE_MUTEX(gpio_lock);
73
74/* store usage of each GPIO. - each bit represents one GPIO */
75static unsigned int gpio_usage_count;
76
77/*----------------------------------------------------------------------*/
78
79/*
80 * To configure TWL4030 GPIO module registers
81 */
82static inline int gpio_twl4030_write(u8 address, u8 data)
83{
Balaji T Kfc7b92f2009-12-13 21:23:33 +010084 return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address);
David Brownelle9d359472008-10-20 23:51:46 +020085}
86
87/*----------------------------------------------------------------------*/
88
89/*
90 * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB}))
91 * PWMs A and B are dedicated to LEDs A and B, respectively.
92 */
93
94#define TWL4030_LED_LEDEN 0x0
95
96/* LEDEN bits */
97#define LEDEN_LEDAON BIT(0)
98#define LEDEN_LEDBON BIT(1)
99#define LEDEN_LEDAEXT BIT(2)
100#define LEDEN_LEDBEXT BIT(3)
101#define LEDEN_LEDAPWM BIT(4)
102#define LEDEN_LEDBPWM BIT(5)
103#define LEDEN_PWM_LENGTHA BIT(6)
104#define LEDEN_PWM_LENGTHB BIT(7)
105
106#define TWL4030_PWMx_PWMxON 0x0
107#define TWL4030_PWMx_PWMxOFF 0x1
108
109#define PWMxON_LENGTH BIT(7)
110
111/*----------------------------------------------------------------------*/
112
113/*
114 * To read a TWL4030 GPIO module register
115 */
116static inline int gpio_twl4030_read(u8 address)
117{
118 u8 data;
119 int ret = 0;
120
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100121 ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address);
David Brownelle9d359472008-10-20 23:51:46 +0200122 return (ret < 0) ? ret : data;
123}
124
125/*----------------------------------------------------------------------*/
126
127static u8 cached_leden; /* protected by gpio_lock */
128
129/* The LED lines are open drain outputs ... a FET pulls to GND, so an
130 * external pullup is needed. We could also expose the integrated PWM
131 * as a LED brightness control; we initialize it as "always on".
132 */
133static void twl4030_led_set_value(int led, int value)
134{
135 u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM;
136 int status;
137
138 if (led)
139 mask <<= 1;
140
141 mutex_lock(&gpio_lock);
142 if (value)
143 cached_leden &= ~mask;
144 else
145 cached_leden |= mask;
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100146 status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
David Brownelle9d359472008-10-20 23:51:46 +0200147 TWL4030_LED_LEDEN);
148 mutex_unlock(&gpio_lock);
149}
150
151static int twl4030_set_gpio_direction(int gpio, int is_input)
152{
153 u8 d_bnk = gpio >> 3;
154 u8 d_msk = BIT(gpio & 0x7);
155 u8 reg = 0;
156 u8 base = REG_GPIODATADIR1 + d_bnk;
157 int ret = 0;
158
159 mutex_lock(&gpio_lock);
160 ret = gpio_twl4030_read(base);
161 if (ret >= 0) {
162 if (is_input)
163 reg = ret & ~d_msk;
164 else
165 reg = ret | d_msk;
166
167 ret = gpio_twl4030_write(base, reg);
168 }
169 mutex_unlock(&gpio_lock);
170 return ret;
171}
172
173static int twl4030_set_gpio_dataout(int gpio, int enable)
174{
175 u8 d_bnk = gpio >> 3;
176 u8 d_msk = BIT(gpio & 0x7);
177 u8 base = 0;
178
179 if (enable)
180 base = REG_SETGPIODATAOUT1 + d_bnk;
181 else
182 base = REG_CLEARGPIODATAOUT1 + d_bnk;
183
184 return gpio_twl4030_write(base, d_msk);
185}
186
187static int twl4030_get_gpio_datain(int gpio)
188{
189 u8 d_bnk = gpio >> 3;
190 u8 d_off = gpio & 0x7;
191 u8 base = 0;
192 int ret = 0;
193
194 if (unlikely((gpio >= TWL4030_GPIO_MAX)
195 || !(gpio_usage_count & BIT(gpio))))
196 return -EPERM;
197
198 base = REG_GPIODATAIN1 + d_bnk;
199 ret = gpio_twl4030_read(base);
200 if (ret > 0)
201 ret = (ret >> d_off) & 0x1;
202
203 return ret;
204}
205
David Brownelle9d359472008-10-20 23:51:46 +0200206/*----------------------------------------------------------------------*/
207
208static int twl_request(struct gpio_chip *chip, unsigned offset)
209{
210 int status = 0;
211
212 mutex_lock(&gpio_lock);
213
214 /* Support the two LED outputs as output-only GPIOs. */
215 if (offset >= TWL4030_GPIO_MAX) {
216 u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT
217 | LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA;
218 u8 module = TWL4030_MODULE_PWMA;
219
220 offset -= TWL4030_GPIO_MAX;
221 if (offset) {
222 ledclr_mask <<= 1;
223 module = TWL4030_MODULE_PWMB;
224 }
225
226 /* initialize PWM to always-drive */
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100227 status = twl_i2c_write_u8(module, 0x7f,
David Brownelle9d359472008-10-20 23:51:46 +0200228 TWL4030_PWMx_PWMxOFF);
229 if (status < 0)
230 goto done;
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100231 status = twl_i2c_write_u8(module, 0x7f,
David Brownelle9d359472008-10-20 23:51:46 +0200232 TWL4030_PWMx_PWMxON);
233 if (status < 0)
234 goto done;
235
236 /* init LED to not-driven (high) */
237 module = TWL4030_MODULE_LED;
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100238 status = twl_i2c_read_u8(module, &cached_leden,
David Brownelle9d359472008-10-20 23:51:46 +0200239 TWL4030_LED_LEDEN);
240 if (status < 0)
241 goto done;
242 cached_leden &= ~ledclr_mask;
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100243 status = twl_i2c_write_u8(module, cached_leden,
David Brownelle9d359472008-10-20 23:51:46 +0200244 TWL4030_LED_LEDEN);
245 if (status < 0)
246 goto done;
247
248 status = 0;
249 goto done;
250 }
251
252 /* on first use, turn GPIO module "on" */
253 if (!gpio_usage_count) {
254 struct twl4030_gpio_platform_data *pdata;
255 u8 value = MASK_GPIO_CTRL_GPIO_ON;
256
257 /* optionally have the first two GPIOs switch vMMC1
258 * and vMMC2 power supplies based on card presence.
259 */
260 pdata = chip->dev->platform_data;
Benoit Coussonb8589e22012-02-29 22:51:32 +0100261 if (pdata)
262 value |= pdata->mmc_cd & 0x03;
David Brownelle9d359472008-10-20 23:51:46 +0200263
264 status = gpio_twl4030_write(REG_GPIO_CTRL, value);
265 }
266
267 if (!status)
268 gpio_usage_count |= (0x1 << offset);
269
270done:
271 mutex_unlock(&gpio_lock);
272 return status;
273}
274
275static void twl_free(struct gpio_chip *chip, unsigned offset)
276{
277 if (offset >= TWL4030_GPIO_MAX) {
278 twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1);
279 return;
280 }
281
282 mutex_lock(&gpio_lock);
283
284 gpio_usage_count &= ~BIT(offset);
285
286 /* on last use, switch off GPIO module */
287 if (!gpio_usage_count)
288 gpio_twl4030_write(REG_GPIO_CTRL, 0x0);
289
290 mutex_unlock(&gpio_lock);
291}
292
293static int twl_direction_in(struct gpio_chip *chip, unsigned offset)
294{
295 return (offset < TWL4030_GPIO_MAX)
296 ? twl4030_set_gpio_direction(offset, 1)
297 : -EINVAL;
298}
299
300static int twl_get(struct gpio_chip *chip, unsigned offset)
301{
302 int status = 0;
303
304 if (offset < TWL4030_GPIO_MAX)
305 status = twl4030_get_gpio_datain(offset);
306 else if (offset == TWL4030_GPIO_MAX)
307 status = cached_leden & LEDEN_LEDAON;
308 else
309 status = cached_leden & LEDEN_LEDBON;
310 return (status < 0) ? 0 : status;
311}
312
313static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
314{
315 if (offset < TWL4030_GPIO_MAX) {
316 twl4030_set_gpio_dataout(offset, value);
317 return twl4030_set_gpio_direction(offset, 0);
318 } else {
319 twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value);
320 return 0;
321 }
322}
323
324static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
325{
326 if (offset < TWL4030_GPIO_MAX)
327 twl4030_set_gpio_dataout(offset, value);
328 else
329 twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value);
330}
331
332static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
333{
334 return (twl4030_gpio_irq_base && (offset < TWL4030_GPIO_MAX))
335 ? (twl4030_gpio_irq_base + offset)
336 : -EINVAL;
337}
338
339static struct gpio_chip twl_gpiochip = {
340 .label = "twl4030",
341 .owner = THIS_MODULE,
342 .request = twl_request,
343 .free = twl_free,
344 .direction_input = twl_direction_in,
345 .get = twl_get,
346 .direction_output = twl_direction_out,
347 .set = twl_set,
348 .to_irq = twl_to_irq,
349 .can_sleep = 1,
350};
351
352/*----------------------------------------------------------------------*/
353
354static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs)
355{
356 u8 message[6];
357 unsigned i, gpio_bit;
358
359 /* For most pins, a pulldown was enabled by default.
360 * We should have data that's specific to this board.
361 */
362 for (gpio_bit = 1, i = 1; i < 6; i++) {
363 u8 bit_mask;
364 unsigned j;
365
366 for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) {
367 if (ups & gpio_bit)
368 bit_mask |= 1 << (j + 1);
369 else if (downs & gpio_bit)
370 bit_mask |= 1 << (j + 0);
371 }
372 message[i] = bit_mask;
373 }
374
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100375 return twl_i2c_write(TWL4030_MODULE_GPIO, message,
David Brownelle9d359472008-10-20 23:51:46 +0200376 REG_GPIOPUPDCTR1, 5);
377}
378
David Brownellcabb3fc2009-01-06 14:42:26 -0800379static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
380{
381 u8 message[4];
382
383 /* 30 msec of debouncing is always used for MMC card detect,
384 * and is optional for everything else.
385 */
386 message[1] = (debounce & 0xff) | (mmc_cd & 0x03);
387 debounce >>= 8;
388 message[2] = (debounce & 0xff);
389 debounce >>= 8;
390 message[3] = (debounce & 0x03);
391
Balaji T Kfc7b92f2009-12-13 21:23:33 +0100392 return twl_i2c_write(TWL4030_MODULE_GPIO, message,
David Brownellcabb3fc2009-01-06 14:42:26 -0800393 REG_GPIO_DEBEN1, 3);
394}
395
David Brownelle9d359472008-10-20 23:51:46 +0200396static int gpio_twl4030_remove(struct platform_device *pdev);
397
398static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
399{
400 struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
Benoit Coussonb8589e22012-02-29 22:51:32 +0100401 struct device_node *node = pdev->dev.of_node;
Benoit Cousson2d9dd992012-02-29 22:48:32 +0100402 int ret, irq_base;
David Brownelle9d359472008-10-20 23:51:46 +0200403
404 /* maybe setup IRQs */
Benoit Cousson2d9dd992012-02-29 22:48:32 +0100405 if (is_module()) {
406 dev_err(&pdev->dev, "can't dispatch IRQs from modules\n");
407 goto no_irqs;
David Brownelle9d359472008-10-20 23:51:46 +0200408 }
409
Benoit Cousson2d9dd992012-02-29 22:48:32 +0100410 irq_base = irq_alloc_descs(-1, 0, TWL4030_GPIO_MAX, 0);
411 if (irq_base < 0) {
412 dev_err(&pdev->dev, "Failed to alloc irq_descs\n");
413 return irq_base;
414 }
415
Benoit Coussonb8589e22012-02-29 22:51:32 +0100416 irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0,
417 &irq_domain_simple_ops, NULL);
418
Benoit Cousson2d9dd992012-02-29 22:48:32 +0100419 ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base);
420 if (ret < 0)
421 return ret;
422
423 twl4030_gpio_irq_base = irq_base;
424
David Brownelle9d359472008-10-20 23:51:46 +0200425no_irqs:
Benoit Coussonb8589e22012-02-29 22:51:32 +0100426 twl_gpiochip.base = -1;
David Brownelle9d359472008-10-20 23:51:46 +0200427 twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
428 twl_gpiochip.dev = &pdev->dev;
429
Benoit Coussonb8589e22012-02-29 22:51:32 +0100430 if (pdata) {
431 twl_gpiochip.base = pdata->gpio_base;
432
433 /*
434 * NOTE: boards may waste power if they don't set pullups
435 * and pulldowns correctly ... default for non-ULPI pins is
436 * pulldown, and some other pins may have external pullups
437 * or pulldowns. Careful!
438 */
439 ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
440 if (ret)
441 dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
442 pdata->pullups, pdata->pulldowns,
443 ret);
444
445 ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
446 if (ret)
447 dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
448 pdata->debounce, pdata->mmc_cd,
449 ret);
450
451 /*
452 * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
453 * is (still) clear if use_leds is set.
454 */
455 if (pdata->use_leds)
456 twl_gpiochip.ngpio += 2;
457 }
David Brownelle9d359472008-10-20 23:51:46 +0200458
459 ret = gpiochip_add(&twl_gpiochip);
460 if (ret < 0) {
Benoit Cousson2d9dd992012-02-29 22:48:32 +0100461 dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
David Brownelle9d359472008-10-20 23:51:46 +0200462 twl_gpiochip.ngpio = 0;
463 gpio_twl4030_remove(pdev);
Benoit Coussonb8589e22012-02-29 22:51:32 +0100464 } else if (pdata && pdata->setup) {
David Brownelle9d359472008-10-20 23:51:46 +0200465 int status;
466
467 status = pdata->setup(&pdev->dev,
468 pdata->gpio_base, TWL4030_GPIO_MAX);
469 if (status)
470 dev_dbg(&pdev->dev, "setup --> %d\n", status);
471 }
472
473 return ret;
474}
475
Mike Frysinger46c529c2009-10-26 16:50:06 -0700476/* Cannot use __devexit as gpio_twl4030_probe() calls us */
477static int gpio_twl4030_remove(struct platform_device *pdev)
David Brownelle9d359472008-10-20 23:51:46 +0200478{
479 struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
480 int status;
481
Benoit Coussonb8589e22012-02-29 22:51:32 +0100482 if (pdata && pdata->teardown) {
David Brownelle9d359472008-10-20 23:51:46 +0200483 status = pdata->teardown(&pdev->dev,
484 pdata->gpio_base, TWL4030_GPIO_MAX);
485 if (status) {
486 dev_dbg(&pdev->dev, "teardown --> %d\n", status);
487 return status;
488 }
489 }
490
491 status = gpiochip_remove(&twl_gpiochip);
492 if (status < 0)
493 return status;
494
495 if (is_module())
496 return 0;
497
498 /* REVISIT no support yet for deregistering all the IRQs */
499 WARN_ON(1);
500 return -EIO;
501}
502
Benoit Coussonb8589e22012-02-29 22:51:32 +0100503static const struct of_device_id twl_gpio_match[] = {
504 { .compatible = "ti,twl4030-gpio", },
505 { },
506};
507MODULE_DEVICE_TABLE(of, twl_gpio_match);
508
David Brownelle9d359472008-10-20 23:51:46 +0200509/* Note: this hardware lives inside an I2C-based multi-function device. */
510MODULE_ALIAS("platform:twl4030_gpio");
511
512static struct platform_driver gpio_twl4030_driver = {
Benoit Coussonb8589e22012-02-29 22:51:32 +0100513 .driver = {
514 .name = "twl4030_gpio",
515 .owner = THIS_MODULE,
516 .of_match_table = of_match_ptr(twl_gpio_match),
517 },
David Brownelle9d359472008-10-20 23:51:46 +0200518 .probe = gpio_twl4030_probe,
Mike Frysinger46c529c2009-10-26 16:50:06 -0700519 .remove = gpio_twl4030_remove,
David Brownelle9d359472008-10-20 23:51:46 +0200520};
521
522static int __init gpio_twl4030_init(void)
523{
524 return platform_driver_register(&gpio_twl4030_driver);
525}
526subsys_initcall(gpio_twl4030_init);
527
528static void __exit gpio_twl4030_exit(void)
529{
530 platform_driver_unregister(&gpio_twl4030_driver);
531}
532module_exit(gpio_twl4030_exit);
533
534MODULE_AUTHOR("Texas Instruments, Inc.");
535MODULE_DESCRIPTION("GPIO interface for TWL4030");
536MODULE_LICENSE("GPL");