Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2003 - 2006 NetXen, Inc. |
| 3 | * All rights reserved. |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or |
| 6 | * modify it under the terms of the GNU General Public License |
| 7 | * as published by the Free Software Foundation; either version 2 |
| 8 | * of the License, or (at your option) any later version. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, but |
| 11 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License |
| 16 | * along with this program; if not, write to the Free Software |
| 17 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, |
| 18 | * MA 02111-1307, USA. |
| 19 | * |
| 20 | * The full GNU General Public License is included in this distribution |
| 21 | * in the file called LICENSE. |
| 22 | * |
| 23 | * Contact Information: |
| 24 | * info@netxen.com |
| 25 | * NetXen, |
| 26 | * 3965 Freedom Circle, Fourth floor, |
| 27 | * Santa Clara, CA 95054 |
| 28 | * |
| 29 | * |
| 30 | * Source file for NIC routines to initialize the Phantom Hardware |
| 31 | * |
| 32 | */ |
| 33 | |
| 34 | #include <linux/netdevice.h> |
| 35 | #include <linux/delay.h> |
| 36 | #include "netxen_nic.h" |
| 37 | #include "netxen_nic_hw.h" |
| 38 | #include "netxen_nic_ioctl.h" |
| 39 | #include "netxen_nic_phan_reg.h" |
| 40 | |
| 41 | struct crb_addr_pair { |
| 42 | long addr; |
| 43 | long data; |
| 44 | }; |
| 45 | |
| 46 | #define NETXEN_MAX_CRB_XFORM 60 |
| 47 | static unsigned int crb_addr_xform[NETXEN_MAX_CRB_XFORM]; |
| 48 | #define NETXEN_ADDR_ERROR ((unsigned long ) 0xffffffff ) |
| 49 | |
| 50 | #define crb_addr_transform(name) \ |
| 51 | crb_addr_xform[NETXEN_HW_PX_MAP_CRB_##name] = \ |
| 52 | NETXEN_HW_CRB_HUB_AGT_ADR_##name << 20 |
| 53 | |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 54 | #define NETXEN_NIC_XDMA_RESET 0x8000ff |
| 55 | |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 56 | static inline void |
| 57 | netxen_nic_locked_write_reg(struct netxen_adapter *adapter, |
| 58 | unsigned long off, int *data) |
| 59 | { |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 60 | void __iomem *addr = pci_base_offset(adapter, off); |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 61 | writel(*data, addr); |
| 62 | } |
| 63 | |
| 64 | static void crb_addr_transform_setup(void) |
| 65 | { |
| 66 | crb_addr_transform(XDMA); |
| 67 | crb_addr_transform(TIMR); |
| 68 | crb_addr_transform(SRE); |
| 69 | crb_addr_transform(SQN3); |
| 70 | crb_addr_transform(SQN2); |
| 71 | crb_addr_transform(SQN1); |
| 72 | crb_addr_transform(SQN0); |
| 73 | crb_addr_transform(SQS3); |
| 74 | crb_addr_transform(SQS2); |
| 75 | crb_addr_transform(SQS1); |
| 76 | crb_addr_transform(SQS0); |
| 77 | crb_addr_transform(RPMX7); |
| 78 | crb_addr_transform(RPMX6); |
| 79 | crb_addr_transform(RPMX5); |
| 80 | crb_addr_transform(RPMX4); |
| 81 | crb_addr_transform(RPMX3); |
| 82 | crb_addr_transform(RPMX2); |
| 83 | crb_addr_transform(RPMX1); |
| 84 | crb_addr_transform(RPMX0); |
| 85 | crb_addr_transform(ROMUSB); |
| 86 | crb_addr_transform(SN); |
| 87 | crb_addr_transform(QMN); |
| 88 | crb_addr_transform(QMS); |
| 89 | crb_addr_transform(PGNI); |
| 90 | crb_addr_transform(PGND); |
| 91 | crb_addr_transform(PGN3); |
| 92 | crb_addr_transform(PGN2); |
| 93 | crb_addr_transform(PGN1); |
| 94 | crb_addr_transform(PGN0); |
| 95 | crb_addr_transform(PGSI); |
| 96 | crb_addr_transform(PGSD); |
| 97 | crb_addr_transform(PGS3); |
| 98 | crb_addr_transform(PGS2); |
| 99 | crb_addr_transform(PGS1); |
| 100 | crb_addr_transform(PGS0); |
| 101 | crb_addr_transform(PS); |
| 102 | crb_addr_transform(PH); |
| 103 | crb_addr_transform(NIU); |
| 104 | crb_addr_transform(I2Q); |
| 105 | crb_addr_transform(EG); |
| 106 | crb_addr_transform(MN); |
| 107 | crb_addr_transform(MS); |
| 108 | crb_addr_transform(CAS2); |
| 109 | crb_addr_transform(CAS1); |
| 110 | crb_addr_transform(CAS0); |
| 111 | crb_addr_transform(CAM); |
| 112 | crb_addr_transform(C2C1); |
| 113 | crb_addr_transform(C2C0); |
| 114 | } |
| 115 | |
| 116 | int netxen_init_firmware(struct netxen_adapter *adapter) |
| 117 | { |
| 118 | u32 state = 0, loops = 0, err = 0; |
| 119 | |
| 120 | /* Window 1 call */ |
| 121 | state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); |
| 122 | |
| 123 | if (state == PHAN_INITIALIZE_ACK) |
| 124 | return 0; |
| 125 | |
| 126 | while (state != PHAN_INITIALIZE_COMPLETE && loops < 2000) { |
| 127 | udelay(100); |
| 128 | /* Window 1 call */ |
| 129 | state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); |
| 130 | |
| 131 | loops++; |
| 132 | } |
| 133 | if (loops >= 2000) { |
| 134 | printk(KERN_ERR "Cmd Peg initialization not complete:%x.\n", |
| 135 | state); |
| 136 | err = -EIO; |
| 137 | return err; |
| 138 | } |
| 139 | /* Window 1 call */ |
| 140 | writel(PHAN_INITIALIZE_ACK, |
| 141 | NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); |
| 142 | |
| 143 | return err; |
| 144 | } |
| 145 | |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 146 | #define NETXEN_ADDR_LIMIT 0xffffffffULL |
| 147 | |
| 148 | void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr, |
| 149 | struct pci_dev **used_dev) |
| 150 | { |
| 151 | void *addr; |
| 152 | |
| 153 | addr = pci_alloc_consistent(pdev, sz, ptr); |
| 154 | if ((unsigned long long)(*ptr) < NETXEN_ADDR_LIMIT) { |
| 155 | *used_dev = pdev; |
| 156 | return addr; |
| 157 | } |
| 158 | pci_free_consistent(pdev, sz, addr, *ptr); |
| 159 | addr = pci_alloc_consistent(NULL, sz, ptr); |
| 160 | *used_dev = NULL; |
| 161 | return addr; |
| 162 | } |
| 163 | |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 164 | void netxen_initialize_adapter_sw(struct netxen_adapter *adapter) |
| 165 | { |
| 166 | int ctxid, ring; |
| 167 | u32 i; |
| 168 | u32 num_rx_bufs = 0; |
| 169 | struct netxen_rcv_desc_ctx *rcv_desc; |
| 170 | |
| 171 | DPRINTK(INFO, "initializing some queues: %p\n", adapter); |
| 172 | for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) { |
| 173 | for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { |
| 174 | struct netxen_rx_buffer *rx_buf; |
| 175 | rcv_desc = &adapter->recv_ctx[ctxid].rcv_desc[ring]; |
| 176 | rcv_desc->rcv_free = rcv_desc->max_rx_desc_count; |
| 177 | rcv_desc->begin_alloc = 0; |
| 178 | rx_buf = rcv_desc->rx_buf_arr; |
| 179 | num_rx_bufs = rcv_desc->max_rx_desc_count; |
| 180 | /* |
| 181 | * Now go through all of them, set reference handles |
| 182 | * and put them in the queues. |
| 183 | */ |
| 184 | for (i = 0; i < num_rx_bufs; i++) { |
| 185 | rx_buf->ref_handle = i; |
| 186 | rx_buf->state = NETXEN_BUFFER_FREE; |
| 187 | |
| 188 | DPRINTK(INFO, "Rx buf:ctx%d i(%d) rx_buf:" |
| 189 | "%p\n", ctxid, i, rx_buf); |
| 190 | rx_buf++; |
| 191 | } |
| 192 | } |
| 193 | } |
| 194 | DPRINTK(INFO, "initialized buffers for %s and %s\n", |
| 195 | "adapter->free_cmd_buf_list", "adapter->free_rxbuf"); |
| 196 | } |
| 197 | |
| 198 | void netxen_initialize_adapter_hw(struct netxen_adapter *adapter) |
| 199 | { |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 200 | int ports = 0; |
| 201 | struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); |
| 202 | |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 203 | if (netxen_nic_get_board_info(adapter) != 0) |
| 204 | printk("%s: Error getting board config info.\n", |
| 205 | netxen_nic_driver_name); |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 206 | get_brd_port_by_type(board_info->board_type, &ports); |
| 207 | if (ports == 0) |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 208 | printk(KERN_ERR "%s: Unknown board type\n", |
| 209 | netxen_nic_driver_name); |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 210 | adapter->ahw.max_ports = ports; |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 211 | } |
| 212 | |
| 213 | void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) |
| 214 | { |
| 215 | struct netxen_drvops *ops = adapter->ops; |
| 216 | switch (adapter->ahw.board_type) { |
| 217 | case NETXEN_NIC_GBE: |
| 218 | ops->enable_phy_interrupts = |
| 219 | netxen_niu_gbe_enable_phy_interrupts; |
| 220 | ops->disable_phy_interrupts = |
| 221 | netxen_niu_gbe_disable_phy_interrupts; |
| 222 | ops->handle_phy_intr = netxen_nic_gbe_handle_phy_intr; |
| 223 | ops->macaddr_set = netxen_niu_macaddr_set; |
| 224 | ops->set_mtu = netxen_nic_set_mtu_gb; |
| 225 | ops->set_promisc = netxen_niu_set_promiscuous_mode; |
| 226 | ops->unset_promisc = netxen_niu_set_promiscuous_mode; |
| 227 | ops->phy_read = netxen_niu_gbe_phy_read; |
| 228 | ops->phy_write = netxen_niu_gbe_phy_write; |
| 229 | ops->init_port = netxen_niu_gbe_init_port; |
| 230 | ops->init_niu = netxen_nic_init_niu_gb; |
| 231 | ops->stop_port = netxen_niu_disable_gbe_port; |
| 232 | break; |
| 233 | |
| 234 | case NETXEN_NIC_XGBE: |
| 235 | ops->enable_phy_interrupts = |
| 236 | netxen_niu_xgbe_enable_phy_interrupts; |
| 237 | ops->disable_phy_interrupts = |
| 238 | netxen_niu_xgbe_disable_phy_interrupts; |
| 239 | ops->handle_phy_intr = netxen_nic_xgbe_handle_phy_intr; |
| 240 | ops->macaddr_set = netxen_niu_xg_macaddr_set; |
| 241 | ops->set_mtu = netxen_nic_set_mtu_xgb; |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 242 | ops->init_port = netxen_niu_xg_init_port; |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 243 | ops->set_promisc = netxen_niu_xg_set_promiscuous_mode; |
| 244 | ops->unset_promisc = netxen_niu_xg_set_promiscuous_mode; |
| 245 | ops->stop_port = netxen_niu_disable_xg_port; |
| 246 | break; |
| 247 | |
| 248 | default: |
| 249 | break; |
| 250 | } |
| 251 | } |
| 252 | |
| 253 | /* |
| 254 | * netxen_decode_crb_addr(0 - utility to translate from internal Phantom CRB |
| 255 | * address to external PCI CRB address. |
| 256 | */ |
| 257 | unsigned long netxen_decode_crb_addr(unsigned long addr) |
| 258 | { |
| 259 | int i; |
| 260 | unsigned long base_addr, offset, pci_base; |
| 261 | |
| 262 | crb_addr_transform_setup(); |
| 263 | |
| 264 | pci_base = NETXEN_ADDR_ERROR; |
| 265 | base_addr = addr & 0xfff00000; |
| 266 | offset = addr & 0x000fffff; |
| 267 | |
| 268 | for (i = 0; i < NETXEN_MAX_CRB_XFORM; i++) { |
| 269 | if (crb_addr_xform[i] == base_addr) { |
| 270 | pci_base = i << 20; |
| 271 | break; |
| 272 | } |
| 273 | } |
| 274 | if (pci_base == NETXEN_ADDR_ERROR) |
| 275 | return pci_base; |
| 276 | else |
| 277 | return (pci_base + offset); |
| 278 | } |
| 279 | |
| 280 | static long rom_max_timeout = 10000; |
| 281 | static long rom_lock_timeout = 1000000; |
| 282 | |
| 283 | static inline int rom_lock(struct netxen_adapter *adapter) |
| 284 | { |
| 285 | int iter; |
| 286 | u32 done = 0; |
| 287 | int timeout = 0; |
| 288 | |
| 289 | while (!done) { |
| 290 | /* acquire semaphore2 from PCI HW block */ |
| 291 | netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_LOCK), |
| 292 | &done); |
| 293 | if (done == 1) |
| 294 | break; |
| 295 | if (timeout >= rom_lock_timeout) |
| 296 | return -EIO; |
| 297 | |
| 298 | timeout++; |
| 299 | /* |
| 300 | * Yield CPU |
| 301 | */ |
| 302 | if (!in_atomic()) |
| 303 | schedule(); |
| 304 | else { |
| 305 | for (iter = 0; iter < 20; iter++) |
| 306 | cpu_relax(); /*This a nop instr on i386 */ |
| 307 | } |
| 308 | } |
| 309 | netxen_nic_reg_write(adapter, NETXEN_ROM_LOCK_ID, ROM_LOCK_DRIVER); |
| 310 | return 0; |
| 311 | } |
| 312 | |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 313 | int netxen_wait_rom_done(struct netxen_adapter *adapter) |
| 314 | { |
| 315 | long timeout = 0; |
| 316 | long done = 0; |
| 317 | |
| 318 | while (done == 0) { |
| 319 | done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS); |
| 320 | done &= 2; |
| 321 | timeout++; |
| 322 | if (timeout >= rom_max_timeout) { |
| 323 | printk("Timeout reached waiting for rom done"); |
| 324 | return -EIO; |
| 325 | } |
| 326 | } |
| 327 | return 0; |
| 328 | } |
| 329 | |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 330 | static inline int netxen_rom_wren(struct netxen_adapter *adapter) |
| 331 | { |
| 332 | /* Set write enable latch in ROM status register */ |
| 333 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| 334 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, |
| 335 | M25P_INSTR_WREN); |
| 336 | if (netxen_wait_rom_done(adapter)) { |
| 337 | return -1; |
| 338 | } |
| 339 | return 0; |
| 340 | } |
| 341 | |
| 342 | static inline unsigned int netxen_rdcrbreg(struct netxen_adapter *adapter, |
| 343 | unsigned int addr) |
| 344 | { |
| 345 | unsigned int data = 0xdeaddead; |
| 346 | data = netxen_nic_reg_read(adapter, addr); |
| 347 | return data; |
| 348 | } |
| 349 | |
| 350 | static inline int netxen_do_rom_rdsr(struct netxen_adapter *adapter) |
| 351 | { |
| 352 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, |
| 353 | M25P_INSTR_RDSR); |
| 354 | if (netxen_wait_rom_done(adapter)) { |
| 355 | return -1; |
| 356 | } |
| 357 | return netxen_rdcrbreg(adapter, NETXEN_ROMUSB_ROM_RDATA); |
| 358 | } |
| 359 | |
| 360 | static inline void netxen_rom_unlock(struct netxen_adapter *adapter) |
| 361 | { |
| 362 | u32 val; |
| 363 | |
| 364 | /* release semaphore2 */ |
| 365 | netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_UNLOCK), &val); |
| 366 | |
| 367 | } |
| 368 | |
| 369 | int netxen_rom_wip_poll(struct netxen_adapter *adapter) |
| 370 | { |
| 371 | long timeout = 0; |
| 372 | long wip = 1; |
| 373 | int val; |
| 374 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| 375 | while (wip != 0) { |
| 376 | val = netxen_do_rom_rdsr(adapter); |
| 377 | wip = val & 1; |
| 378 | timeout++; |
| 379 | if (timeout > rom_max_timeout) { |
| 380 | return -1; |
| 381 | } |
| 382 | } |
| 383 | return 0; |
| 384 | } |
| 385 | |
| 386 | static inline int do_rom_fast_write(struct netxen_adapter *adapter, |
| 387 | int addr, int data) |
| 388 | { |
| 389 | if (netxen_rom_wren(adapter)) { |
| 390 | return -1; |
| 391 | } |
| 392 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_WDATA, data); |
| 393 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); |
| 394 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); |
| 395 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, |
| 396 | M25P_INSTR_PP); |
| 397 | if (netxen_wait_rom_done(adapter)) { |
| 398 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| 399 | return -1; |
| 400 | } |
| 401 | |
| 402 | return netxen_rom_wip_poll(adapter); |
| 403 | } |
| 404 | |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 405 | static inline int |
| 406 | do_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp) |
| 407 | { |
| 408 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); |
| 409 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); |
| 410 | udelay(100); /* prevent bursting on CRB */ |
| 411 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); |
| 412 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb); |
| 413 | if (netxen_wait_rom_done(adapter)) { |
| 414 | printk("Error waiting for rom done\n"); |
| 415 | return -EIO; |
| 416 | } |
| 417 | /* reset abyte_cnt and dummy_byte_cnt */ |
| 418 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| 419 | udelay(100); /* prevent bursting on CRB */ |
| 420 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); |
| 421 | |
| 422 | *valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA); |
| 423 | return 0; |
| 424 | } |
| 425 | |
| 426 | int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp) |
| 427 | { |
| 428 | int ret; |
| 429 | |
| 430 | if (rom_lock(adapter) != 0) |
| 431 | return -EIO; |
| 432 | |
| 433 | ret = do_rom_fast_read(adapter, addr, valp); |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 434 | netxen_rom_unlock(adapter); |
| 435 | return ret; |
| 436 | } |
| 437 | |
| 438 | int netxen_rom_fast_write(struct netxen_adapter *adapter, int addr, int data) |
| 439 | { |
| 440 | int ret = 0; |
| 441 | |
| 442 | if (rom_lock(adapter) != 0) { |
| 443 | return -1; |
| 444 | } |
| 445 | ret = do_rom_fast_write(adapter, addr, data); |
| 446 | netxen_rom_unlock(adapter); |
| 447 | return ret; |
| 448 | } |
| 449 | int netxen_do_rom_se(struct netxen_adapter *adapter, int addr) |
| 450 | { |
| 451 | netxen_rom_wren(adapter); |
| 452 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); |
| 453 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); |
| 454 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, |
| 455 | M25P_INSTR_SE); |
| 456 | if (netxen_wait_rom_done(adapter)) { |
| 457 | netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| 458 | return -1; |
| 459 | } |
| 460 | return netxen_rom_wip_poll(adapter); |
| 461 | } |
| 462 | |
| 463 | int netxen_rom_se(struct netxen_adapter *adapter, int addr) |
| 464 | { |
| 465 | int ret = 0; |
| 466 | if (rom_lock(adapter) != 0) { |
| 467 | return -1; |
| 468 | } |
| 469 | ret = netxen_do_rom_se(adapter, addr); |
| 470 | netxen_rom_unlock(adapter); |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 471 | return ret; |
| 472 | } |
| 473 | |
| 474 | #define NETXEN_BOARDTYPE 0x4008 |
| 475 | #define NETXEN_BOARDNUM 0x400c |
| 476 | #define NETXEN_CHIPNUM 0x4010 |
| 477 | #define NETXEN_ROMBUS_RESET 0xFFFFFFFF |
| 478 | #define NETXEN_ROM_FIRST_BARRIER 0x800000000ULL |
| 479 | #define NETXEN_ROM_FOUND_INIT 0x400 |
| 480 | |
| 481 | int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) |
| 482 | { |
| 483 | int addr, val, status; |
| 484 | int n, i; |
| 485 | int init_delay = 0; |
| 486 | struct crb_addr_pair *buf; |
| 487 | unsigned long off; |
| 488 | |
| 489 | /* resetall */ |
| 490 | status = netxen_nic_get_board_info(adapter); |
| 491 | if (status) |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 492 | printk("%s: netxen_pinit_from_rom: Error getting board info\n", |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 493 | netxen_nic_driver_name); |
| 494 | |
| 495 | netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, |
| 496 | NETXEN_ROMBUS_RESET); |
| 497 | |
| 498 | if (verbose) { |
| 499 | int val; |
| 500 | if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0) |
| 501 | printk("P2 ROM board type: 0x%08x\n", val); |
| 502 | else |
| 503 | printk("Could not read board type\n"); |
| 504 | if (netxen_rom_fast_read(adapter, NETXEN_BOARDNUM, &val) == 0) |
| 505 | printk("P2 ROM board num: 0x%08x\n", val); |
| 506 | else |
| 507 | printk("Could not read board number\n"); |
| 508 | if (netxen_rom_fast_read(adapter, NETXEN_CHIPNUM, &val) == 0) |
| 509 | printk("P2 ROM chip num: 0x%08x\n", val); |
| 510 | else |
| 511 | printk("Could not read chip number\n"); |
| 512 | } |
| 513 | |
| 514 | if (netxen_rom_fast_read(adapter, 0, &n) == 0 |
| 515 | && (n & NETXEN_ROM_FIRST_BARRIER)) { |
| 516 | n &= ~NETXEN_ROM_ROUNDUP; |
| 517 | if (n < NETXEN_ROM_FOUND_INIT) { |
| 518 | if (verbose) |
| 519 | printk("%s: %d CRB init values found" |
| 520 | " in ROM.\n", netxen_nic_driver_name, n); |
| 521 | } else { |
| 522 | printk("%s:n=0x%x Error! NetXen card flash not" |
| 523 | " initialized.\n", __FUNCTION__, n); |
| 524 | return -EIO; |
| 525 | } |
| 526 | buf = kcalloc(n, sizeof(struct crb_addr_pair), GFP_KERNEL); |
| 527 | if (buf == NULL) { |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 528 | printk("%s: netxen_pinit_from_rom: Unable to calloc " |
| 529 | "memory.\n", netxen_nic_driver_name); |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 530 | return -ENOMEM; |
| 531 | } |
| 532 | for (i = 0; i < n; i++) { |
| 533 | if (netxen_rom_fast_read(adapter, 8 * i + 4, &val) != 0 |
| 534 | || netxen_rom_fast_read(adapter, 8 * i + 8, |
| 535 | &addr) != 0) |
| 536 | return -EIO; |
| 537 | |
| 538 | buf[i].addr = addr; |
| 539 | buf[i].data = val; |
| 540 | |
| 541 | if (verbose) |
| 542 | printk("%s: PCI: 0x%08x == 0x%08x\n", |
| 543 | netxen_nic_driver_name, (unsigned int) |
| 544 | netxen_decode_crb_addr((unsigned long) |
| 545 | addr), val); |
| 546 | } |
| 547 | for (i = 0; i < n; i++) { |
| 548 | |
| 549 | off = |
| 550 | netxen_decode_crb_addr((unsigned long)buf[i].addr) + |
| 551 | NETXEN_PCI_CRBSPACE; |
| 552 | /* skipping cold reboot MAGIC */ |
| 553 | if (off == NETXEN_CAM_RAM(0x1fc)) |
| 554 | continue; |
| 555 | |
| 556 | /* After writing this register, HW needs time for CRB */ |
| 557 | /* to quiet down (else crb_window returns 0xffffffff) */ |
| 558 | if (off == NETXEN_ROMUSB_GLB_SW_RESET) { |
| 559 | init_delay = 1; |
| 560 | /* hold xdma in reset also */ |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 561 | buf[i].data = NETXEN_NIC_XDMA_RESET; |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 562 | } |
| 563 | |
| 564 | if (ADDR_IN_WINDOW1(off)) { |
| 565 | writel(buf[i].data, |
| 566 | NETXEN_CRB_NORMALIZE(adapter, off)); |
| 567 | } else { |
| 568 | netxen_nic_pci_change_crbwindow(adapter, 0); |
| 569 | writel(buf[i].data, |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 570 | pci_base_offset(adapter, off)); |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 571 | |
| 572 | netxen_nic_pci_change_crbwindow(adapter, 1); |
| 573 | } |
| 574 | if (init_delay == 1) { |
| 575 | ssleep(1); |
| 576 | init_delay = 0; |
| 577 | } |
| 578 | msleep(1); |
| 579 | } |
| 580 | kfree(buf); |
| 581 | |
| 582 | /* disable_peg_cache_all */ |
| 583 | |
| 584 | /* unreset_net_cache */ |
| 585 | netxen_nic_hw_read_wx(adapter, NETXEN_ROMUSB_GLB_SW_RESET, &val, |
| 586 | 4); |
| 587 | netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, |
| 588 | (val & 0xffffff0f)); |
| 589 | /* p2dn replyCount */ |
| 590 | netxen_crb_writelit_adapter(adapter, |
| 591 | NETXEN_CRB_PEG_NET_D + 0xec, 0x1e); |
| 592 | /* disable_peg_cache 0 */ |
| 593 | netxen_crb_writelit_adapter(adapter, |
| 594 | NETXEN_CRB_PEG_NET_D + 0x4c, 8); |
| 595 | /* disable_peg_cache 1 */ |
| 596 | netxen_crb_writelit_adapter(adapter, |
| 597 | NETXEN_CRB_PEG_NET_I + 0x4c, 8); |
| 598 | |
| 599 | /* peg_clr_all */ |
| 600 | |
| 601 | /* peg_clr 0 */ |
| 602 | netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x8, |
| 603 | 0); |
| 604 | netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0xc, |
| 605 | 0); |
| 606 | /* peg_clr 1 */ |
| 607 | netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x8, |
| 608 | 0); |
| 609 | netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0xc, |
| 610 | 0); |
| 611 | /* peg_clr 2 */ |
| 612 | netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x8, |
| 613 | 0); |
| 614 | netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0xc, |
| 615 | 0); |
| 616 | /* peg_clr 3 */ |
| 617 | netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x8, |
| 618 | 0); |
| 619 | netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0xc, |
| 620 | 0); |
| 621 | } |
| 622 | return 0; |
| 623 | } |
| 624 | |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 625 | void netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val) |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 626 | { |
| 627 | u32 val = 0; |
| 628 | int loops = 0; |
| 629 | |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 630 | if (!pegtune_val) { |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 631 | while (val != PHAN_INITIALIZE_COMPLETE && loops < 200000) { |
| 632 | udelay(100); |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 633 | schedule(); |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 634 | val = |
| 635 | readl(NETXEN_CRB_NORMALIZE |
| 636 | (adapter, CRB_CMDPEG_STATE)); |
| 637 | loops++; |
| 638 | } |
| 639 | if (val != PHAN_INITIALIZE_COMPLETE) |
| 640 | printk("WARNING: Initial boot wait loop failed...\n"); |
| 641 | } |
| 642 | } |
| 643 | |
| 644 | int netxen_nic_rx_has_work(struct netxen_adapter *adapter) |
| 645 | { |
| 646 | int ctx; |
| 647 | |
| 648 | for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { |
| 649 | struct netxen_recv_context *recv_ctx = |
| 650 | &(adapter->recv_ctx[ctx]); |
| 651 | u32 consumer; |
| 652 | struct status_desc *desc_head; |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 653 | struct status_desc *desc; |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 654 | |
| 655 | consumer = recv_ctx->status_rx_consumer; |
| 656 | desc_head = recv_ctx->rcv_status_desc_head; |
| 657 | desc = &desc_head[consumer]; |
| 658 | |
| 659 | if (((le16_to_cpu(desc->owner)) & STATUS_OWNER_HOST)) |
| 660 | return 1; |
| 661 | } |
| 662 | |
| 663 | return 0; |
| 664 | } |
| 665 | |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 666 | static inline int netxen_nic_check_temp(struct netxen_adapter *adapter) |
| 667 | { |
| 668 | int port_num; |
| 669 | struct netxen_port *port; |
| 670 | struct net_device *netdev; |
| 671 | uint32_t temp, temp_state, temp_val; |
| 672 | int rv = 0; |
| 673 | |
| 674 | temp = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_TEMP_STATE)); |
| 675 | |
| 676 | temp_state = nx_get_temp_state(temp); |
| 677 | temp_val = nx_get_temp_val(temp); |
| 678 | |
| 679 | if (temp_state == NX_TEMP_PANIC) { |
| 680 | printk(KERN_ALERT |
| 681 | "%s: Device temperature %d degrees C exceeds" |
| 682 | " maximum allowed. Hardware has been shut down.\n", |
| 683 | netxen_nic_driver_name, temp_val); |
| 684 | for (port_num = 0; port_num < adapter->ahw.max_ports; |
| 685 | port_num++) { |
| 686 | port = adapter->port[port_num]; |
| 687 | netdev = port->netdev; |
| 688 | |
| 689 | netif_carrier_off(netdev); |
| 690 | netif_stop_queue(netdev); |
| 691 | } |
| 692 | rv = 1; |
| 693 | } else if (temp_state == NX_TEMP_WARN) { |
| 694 | if (adapter->temp == NX_TEMP_NORMAL) { |
| 695 | printk(KERN_ALERT |
| 696 | "%s: Device temperature %d degrees C " |
| 697 | "exceeds operating range." |
| 698 | " Immediate action needed.\n", |
| 699 | netxen_nic_driver_name, temp_val); |
| 700 | } |
| 701 | } else { |
| 702 | if (adapter->temp == NX_TEMP_WARN) { |
| 703 | printk(KERN_INFO |
| 704 | "%s: Device temperature is now %d degrees C" |
| 705 | " in normal range.\n", netxen_nic_driver_name, |
| 706 | temp_val); |
| 707 | } |
| 708 | } |
| 709 | adapter->temp = temp_state; |
| 710 | return rv; |
| 711 | } |
| 712 | |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 713 | void netxen_watchdog_task(unsigned long v) |
| 714 | { |
| 715 | int port_num; |
| 716 | struct netxen_port *port; |
| 717 | struct net_device *netdev; |
| 718 | struct netxen_adapter *adapter = (struct netxen_adapter *)v; |
| 719 | |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 720 | if (netxen_nic_check_temp(adapter)) |
| 721 | return; |
| 722 | |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 723 | for (port_num = 0; port_num < adapter->ahw.max_ports; port_num++) { |
| 724 | port = adapter->port[port_num]; |
| 725 | netdev = port->netdev; |
| 726 | |
| 727 | if ((netif_running(netdev)) && !netif_carrier_ok(netdev)) { |
| 728 | printk(KERN_INFO "%s port %d, %s carrier is now ok\n", |
| 729 | netxen_nic_driver_name, port_num, netdev->name); |
| 730 | netif_carrier_on(netdev); |
| 731 | } |
| 732 | |
| 733 | if (netif_queue_stopped(netdev)) |
| 734 | netif_wake_queue(netdev); |
| 735 | } |
| 736 | |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 737 | if (adapter->ops->handle_phy_intr) |
| 738 | adapter->ops->handle_phy_intr(adapter); |
| 739 | mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); |
| 740 | } |
| 741 | |
| 742 | /* |
| 743 | * netxen_process_rcv() send the received packet to the protocol stack. |
| 744 | * and if the number of receives exceeds RX_BUFFERS_REFILL, then we |
| 745 | * invoke the routine to send more rx buffers to the Phantom... |
| 746 | */ |
| 747 | void |
| 748 | netxen_process_rcv(struct netxen_adapter *adapter, int ctxid, |
| 749 | struct status_desc *desc) |
| 750 | { |
| 751 | struct netxen_port *port = adapter->port[STATUS_DESC_PORT(desc)]; |
| 752 | struct pci_dev *pdev = port->pdev; |
| 753 | struct net_device *netdev = port->netdev; |
| 754 | int index = le16_to_cpu(desc->reference_handle); |
| 755 | struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctxid]); |
| 756 | struct netxen_rx_buffer *buffer; |
| 757 | struct sk_buff *skb; |
| 758 | u32 length = le16_to_cpu(desc->total_length); |
| 759 | u32 desc_ctx; |
| 760 | struct netxen_rcv_desc_ctx *rcv_desc; |
| 761 | int ret; |
| 762 | |
| 763 | desc_ctx = STATUS_DESC_TYPE(desc); |
| 764 | if (unlikely(desc_ctx >= NUM_RCV_DESC_RINGS)) { |
| 765 | printk("%s: %s Bad Rcv descriptor ring\n", |
| 766 | netxen_nic_driver_name, netdev->name); |
| 767 | return; |
| 768 | } |
| 769 | |
| 770 | rcv_desc = &recv_ctx->rcv_desc[desc_ctx]; |
| 771 | buffer = &rcv_desc->rx_buf_arr[index]; |
| 772 | |
| 773 | pci_unmap_single(pdev, buffer->dma, rcv_desc->dma_size, |
| 774 | PCI_DMA_FROMDEVICE); |
| 775 | |
| 776 | skb = (struct sk_buff *)buffer->skb; |
| 777 | |
| 778 | if (likely(STATUS_DESC_STATUS(desc) == STATUS_CKSUM_OK)) { |
| 779 | port->stats.csummed++; |
| 780 | skb->ip_summed = CHECKSUM_UNNECESSARY; |
| 781 | } else |
| 782 | skb->ip_summed = CHECKSUM_NONE; |
| 783 | skb->dev = netdev; |
| 784 | skb_put(skb, length); |
| 785 | skb->protocol = eth_type_trans(skb, netdev); |
| 786 | |
| 787 | ret = netif_receive_skb(skb); |
| 788 | |
| 789 | /* |
| 790 | * RH: Do we need these stats on a regular basis. Can we get it from |
| 791 | * Linux stats. |
| 792 | */ |
| 793 | switch (ret) { |
| 794 | case NET_RX_SUCCESS: |
| 795 | port->stats.uphappy++; |
| 796 | break; |
| 797 | |
| 798 | case NET_RX_CN_LOW: |
| 799 | port->stats.uplcong++; |
| 800 | break; |
| 801 | |
| 802 | case NET_RX_CN_MOD: |
| 803 | port->stats.upmcong++; |
| 804 | break; |
| 805 | |
| 806 | case NET_RX_CN_HIGH: |
| 807 | port->stats.uphcong++; |
| 808 | break; |
| 809 | |
| 810 | case NET_RX_DROP: |
| 811 | port->stats.updropped++; |
| 812 | break; |
| 813 | |
| 814 | default: |
| 815 | port->stats.updunno++; |
| 816 | break; |
| 817 | } |
| 818 | |
| 819 | netdev->last_rx = jiffies; |
| 820 | |
| 821 | rcv_desc->rcv_free++; |
| 822 | rcv_desc->rcv_pending--; |
| 823 | |
| 824 | /* |
| 825 | * We just consumed one buffer so post a buffer. |
| 826 | */ |
| 827 | adapter->stats.post_called++; |
| 828 | buffer->skb = NULL; |
| 829 | buffer->state = NETXEN_BUFFER_FREE; |
| 830 | |
| 831 | port->stats.no_rcv++; |
| 832 | port->stats.rxbytes += length; |
| 833 | } |
| 834 | |
| 835 | /* Process Receive status ring */ |
| 836 | u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max) |
| 837 | { |
| 838 | struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctxid]); |
| 839 | struct status_desc *desc_head = recv_ctx->rcv_status_desc_head; |
| 840 | struct status_desc *desc; /* used to read status desc here */ |
| 841 | u32 consumer = recv_ctx->status_rx_consumer; |
| 842 | int count = 0, ring; |
| 843 | |
| 844 | DPRINTK(INFO, "procesing receive\n"); |
| 845 | /* |
| 846 | * we assume in this case that there is only one port and that is |
| 847 | * port #1...changes need to be done in firmware to indicate port |
| 848 | * number as part of the descriptor. This way we will be able to get |
| 849 | * the netdev which is associated with that device. |
| 850 | */ |
| 851 | while (count < max) { |
| 852 | desc = &desc_head[consumer]; |
| 853 | if (!((le16_to_cpu(desc->owner)) & STATUS_OWNER_HOST)) { |
| 854 | DPRINTK(ERR, "desc %p ownedby %x\n", desc, desc->owner); |
| 855 | break; |
| 856 | } |
| 857 | netxen_process_rcv(adapter, ctxid, desc); |
| 858 | desc->owner = STATUS_OWNER_PHANTOM; |
| 859 | consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1); |
| 860 | count++; |
| 861 | } |
| 862 | if (count) { |
| 863 | for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { |
| 864 | netxen_post_rx_buffers(adapter, ctxid, ring); |
| 865 | } |
| 866 | } |
| 867 | |
| 868 | /* update the consumer index in phantom */ |
| 869 | if (count) { |
| 870 | adapter->stats.process_rcv++; |
| 871 | recv_ctx->status_rx_consumer = consumer; |
| 872 | |
| 873 | /* Window = 1 */ |
| 874 | writel(consumer, |
| 875 | NETXEN_CRB_NORMALIZE(adapter, |
| 876 | recv_crb_registers[ctxid]. |
| 877 | crb_rcv_status_consumer)); |
| 878 | } |
| 879 | |
| 880 | return count; |
| 881 | } |
| 882 | |
| 883 | /* Process Command status ring */ |
| 884 | void netxen_process_cmd_ring(unsigned long data) |
| 885 | { |
| 886 | u32 last_consumer; |
| 887 | u32 consumer; |
| 888 | struct netxen_adapter *adapter = (struct netxen_adapter *)data; |
| 889 | int count = 0; |
| 890 | struct netxen_cmd_buffer *buffer; |
| 891 | struct netxen_port *port; /* port #1 */ |
| 892 | struct netxen_port *nport; |
| 893 | struct pci_dev *pdev; |
| 894 | struct netxen_skb_frag *frag; |
| 895 | u32 i; |
| 896 | struct sk_buff *skb = NULL; |
| 897 | int p; |
| 898 | |
| 899 | spin_lock(&adapter->tx_lock); |
| 900 | last_consumer = adapter->last_cmd_consumer; |
| 901 | DPRINTK(INFO, "procesing xmit complete\n"); |
| 902 | /* we assume in this case that there is only one port and that is |
| 903 | * port #1...changes need to be done in firmware to indicate port |
| 904 | * number as part of the descriptor. This way we will be able to get |
| 905 | * the netdev which is associated with that device. |
| 906 | */ |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 907 | consumer = |
| 908 | readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMD_CONSUMER_OFFSET)); |
| 909 | |
| 910 | if (last_consumer == consumer) { /* Ring is empty */ |
| 911 | DPRINTK(INFO, "last_consumer %d == consumer %d\n", |
| 912 | last_consumer, consumer); |
| 913 | spin_unlock(&adapter->tx_lock); |
| 914 | return; |
| 915 | } |
| 916 | |
| 917 | adapter->proc_cmd_buf_counter++; |
| 918 | adapter->stats.process_xmit++; |
| 919 | /* |
| 920 | * Not needed - does not seem to be used anywhere. |
| 921 | * adapter->cmd_consumer = consumer; |
| 922 | */ |
| 923 | spin_unlock(&adapter->tx_lock); |
| 924 | |
| 925 | while ((last_consumer != consumer) && (count < MAX_STATUS_HANDLE)) { |
| 926 | buffer = &adapter->cmd_buf_arr[last_consumer]; |
| 927 | port = adapter->port[buffer->port]; |
| 928 | pdev = port->pdev; |
| 929 | frag = &buffer->frag_array[0]; |
| 930 | skb = buffer->skb; |
| 931 | if (skb && (cmpxchg(&buffer->skb, skb, 0) == skb)) { |
| 932 | pci_unmap_single(pdev, frag->dma, frag->length, |
| 933 | PCI_DMA_TODEVICE); |
| 934 | for (i = 1; i < buffer->frag_count; i++) { |
| 935 | DPRINTK(INFO, "getting fragment no %d\n", i); |
| 936 | frag++; /* Get the next frag */ |
| 937 | pci_unmap_page(pdev, frag->dma, frag->length, |
| 938 | PCI_DMA_TODEVICE); |
| 939 | } |
| 940 | |
| 941 | port->stats.skbfreed++; |
| 942 | dev_kfree_skb_any(skb); |
| 943 | skb = NULL; |
| 944 | } else if (adapter->proc_cmd_buf_counter == 1) { |
| 945 | port->stats.txnullskb++; |
| 946 | } |
| 947 | if (unlikely(netif_queue_stopped(port->netdev) |
| 948 | && netif_carrier_ok(port->netdev)) |
| 949 | && ((jiffies - port->netdev->trans_start) > |
| 950 | port->netdev->watchdog_timeo)) { |
| 951 | schedule_work(&port->adapter->tx_timeout_task); |
| 952 | } |
| 953 | |
| 954 | last_consumer = get_next_index(last_consumer, |
| 955 | adapter->max_tx_desc_count); |
| 956 | count++; |
| 957 | } |
| 958 | adapter->stats.noxmitdone += count; |
| 959 | |
| 960 | count = 0; |
| 961 | spin_lock(&adapter->tx_lock); |
| 962 | if ((--adapter->proc_cmd_buf_counter) == 0) { |
| 963 | adapter->last_cmd_consumer = last_consumer; |
| 964 | while ((adapter->last_cmd_consumer != consumer) |
| 965 | && (count < MAX_STATUS_HANDLE)) { |
| 966 | buffer = |
| 967 | &adapter->cmd_buf_arr[adapter->last_cmd_consumer]; |
| 968 | count++; |
| 969 | if (buffer->skb) |
| 970 | break; |
| 971 | else |
| 972 | adapter->last_cmd_consumer = |
| 973 | get_next_index(adapter->last_cmd_consumer, |
| 974 | adapter->max_tx_desc_count); |
| 975 | } |
| 976 | } |
| 977 | if (count) { |
| 978 | for (p = 0; p < adapter->ahw.max_ports; p++) { |
| 979 | nport = adapter->port[p]; |
| 980 | if (netif_queue_stopped(nport->netdev) |
| 981 | && (nport->flags & NETXEN_NETDEV_STATUS)) { |
| 982 | netif_wake_queue(nport->netdev); |
| 983 | nport->flags &= ~NETXEN_NETDEV_STATUS; |
| 984 | } |
| 985 | } |
| 986 | } |
| 987 | |
| 988 | spin_unlock(&adapter->tx_lock); |
| 989 | DPRINTK(INFO, "last consumer is %d in %s\n", last_consumer, |
| 990 | __FUNCTION__); |
| 991 | } |
| 992 | |
| 993 | /* |
| 994 | * netxen_post_rx_buffers puts buffer in the Phantom memory |
| 995 | */ |
| 996 | void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid) |
| 997 | { |
| 998 | struct pci_dev *pdev = adapter->ahw.pdev; |
| 999 | struct sk_buff *skb; |
| 1000 | struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctx]); |
| 1001 | struct netxen_rcv_desc_ctx *rcv_desc = NULL; |
| 1002 | struct netxen_recv_crb *crbarea = &recv_crb_registers[ctx]; |
| 1003 | struct netxen_rcv_desc_crb *rcv_desc_crb = NULL; |
| 1004 | u32 producer; |
| 1005 | struct rcv_desc *pdesc; |
| 1006 | struct netxen_rx_buffer *buffer; |
| 1007 | int count = 0; |
| 1008 | int index = 0; |
| 1009 | |
| 1010 | adapter->stats.post_called++; |
| 1011 | rcv_desc = &recv_ctx->rcv_desc[ringid]; |
| 1012 | rcv_desc_crb = &crbarea->rcv_desc_crb[ringid]; |
| 1013 | |
| 1014 | producer = rcv_desc->producer; |
| 1015 | index = rcv_desc->begin_alloc; |
| 1016 | buffer = &rcv_desc->rx_buf_arr[index]; |
| 1017 | /* We can start writing rx descriptors into the phantom memory. */ |
| 1018 | while (buffer->state == NETXEN_BUFFER_FREE) { |
| 1019 | skb = dev_alloc_skb(rcv_desc->skb_size); |
| 1020 | if (unlikely(!skb)) { |
| 1021 | /* |
| 1022 | * We need to schedule the posting of buffers to the pegs. |
| 1023 | */ |
| 1024 | rcv_desc->begin_alloc = index; |
Amit S. Kale | cb8011a | 2006-11-29 09:00:10 -0800 | [diff] [blame^] | 1025 | DPRINTK(ERR, "netxen_post_rx_buffers: " |
Amit S. Kale | 3d396eb | 2006-10-21 15:33:03 -0400 | [diff] [blame] | 1026 | " allocated only %d buffers\n", count); |
| 1027 | break; |
| 1028 | } |
| 1029 | count++; /* now there should be no failure */ |
| 1030 | pdesc = &rcv_desc->desc_head[producer]; |
| 1031 | skb_reserve(skb, NET_IP_ALIGN); |
| 1032 | /* |
| 1033 | * This will be setup when we receive the |
| 1034 | * buffer after it has been filled |
| 1035 | * skb->dev = netdev; |
| 1036 | */ |
| 1037 | buffer->skb = skb; |
| 1038 | buffer->state = NETXEN_BUFFER_BUSY; |
| 1039 | buffer->dma = pci_map_single(pdev, skb->data, |
| 1040 | rcv_desc->dma_size, |
| 1041 | PCI_DMA_FROMDEVICE); |
| 1042 | /* make a rcv descriptor */ |
| 1043 | pdesc->reference_handle = le16_to_cpu(buffer->ref_handle); |
| 1044 | pdesc->buffer_length = le16_to_cpu(rcv_desc->dma_size); |
| 1045 | pdesc->addr_buffer = cpu_to_le64(buffer->dma); |
| 1046 | DPRINTK(INFO, "done writing descripter\n"); |
| 1047 | producer = |
| 1048 | get_next_index(producer, rcv_desc->max_rx_desc_count); |
| 1049 | index = get_next_index(index, rcv_desc->max_rx_desc_count); |
| 1050 | buffer = &rcv_desc->rx_buf_arr[index]; |
| 1051 | } |
| 1052 | |
| 1053 | /* if we did allocate buffers, then write the count to Phantom */ |
| 1054 | if (count) { |
| 1055 | rcv_desc->begin_alloc = index; |
| 1056 | rcv_desc->rcv_pending += count; |
| 1057 | adapter->stats.lastposted = count; |
| 1058 | adapter->stats.posted += count; |
| 1059 | rcv_desc->producer = producer; |
| 1060 | if (rcv_desc->rcv_free >= 32) { |
| 1061 | rcv_desc->rcv_free = 0; |
| 1062 | /* Window = 1 */ |
| 1063 | writel((producer - 1) & |
| 1064 | (rcv_desc->max_rx_desc_count - 1), |
| 1065 | NETXEN_CRB_NORMALIZE(adapter, |
| 1066 | rcv_desc_crb-> |
| 1067 | crb_rcv_producer_offset)); |
| 1068 | wmb(); |
| 1069 | } |
| 1070 | } |
| 1071 | } |
| 1072 | |
| 1073 | int netxen_nic_tx_has_work(struct netxen_adapter *adapter) |
| 1074 | { |
| 1075 | if (find_diff_among(adapter->last_cmd_consumer, |
| 1076 | adapter->cmd_producer, |
| 1077 | adapter->max_tx_desc_count) > 0) |
| 1078 | return 1; |
| 1079 | |
| 1080 | return 0; |
| 1081 | } |
| 1082 | |
| 1083 | int |
| 1084 | netxen_nic_fill_statistics(struct netxen_adapter *adapter, |
| 1085 | struct netxen_port *port, |
| 1086 | struct netxen_statistics *netxen_stats) |
| 1087 | { |
| 1088 | void __iomem *addr; |
| 1089 | |
| 1090 | if (adapter->ahw.board_type == NETXEN_NIC_XGBE) { |
| 1091 | netxen_nic_pci_change_crbwindow(adapter, 0); |
| 1092 | NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_TX_BYTE_CNT, |
| 1093 | &(netxen_stats->tx_bytes)); |
| 1094 | NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_TX_FRAME_CNT, |
| 1095 | &(netxen_stats->tx_packets)); |
| 1096 | NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_RX_BYTE_CNT, |
| 1097 | &(netxen_stats->rx_bytes)); |
| 1098 | NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_RX_FRAME_CNT, |
| 1099 | &(netxen_stats->rx_packets)); |
| 1100 | NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_AGGR_ERROR_CNT, |
| 1101 | &(netxen_stats->rx_errors)); |
| 1102 | NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_CRC_ERROR_CNT, |
| 1103 | &(netxen_stats->rx_crc_errors)); |
| 1104 | NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR, |
| 1105 | &(netxen_stats-> |
| 1106 | rx_long_length_error)); |
| 1107 | NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR, |
| 1108 | &(netxen_stats-> |
| 1109 | rx_short_length_error)); |
| 1110 | |
| 1111 | netxen_nic_pci_change_crbwindow(adapter, 1); |
| 1112 | } else { |
| 1113 | spin_lock_bh(&adapter->tx_lock); |
| 1114 | netxen_stats->tx_bytes = port->stats.txbytes; |
| 1115 | netxen_stats->tx_packets = port->stats.xmitedframes + |
| 1116 | port->stats.xmitfinished; |
| 1117 | netxen_stats->rx_bytes = port->stats.rxbytes; |
| 1118 | netxen_stats->rx_packets = port->stats.no_rcv; |
| 1119 | netxen_stats->rx_errors = port->stats.rcvdbadskb; |
| 1120 | netxen_stats->tx_errors = port->stats.nocmddescriptor; |
| 1121 | netxen_stats->rx_short_length_error = port->stats.uplcong; |
| 1122 | netxen_stats->rx_long_length_error = port->stats.uphcong; |
| 1123 | netxen_stats->rx_crc_errors = 0; |
| 1124 | netxen_stats->rx_mac_errors = 0; |
| 1125 | spin_unlock_bh(&adapter->tx_lock); |
| 1126 | } |
| 1127 | return 0; |
| 1128 | } |
| 1129 | |
| 1130 | void netxen_nic_clear_stats(struct netxen_adapter *adapter) |
| 1131 | { |
| 1132 | struct netxen_port *port; |
| 1133 | int port_num; |
| 1134 | |
| 1135 | memset(&adapter->stats, 0, sizeof(adapter->stats)); |
| 1136 | for (port_num = 0; port_num < adapter->ahw.max_ports; port_num++) { |
| 1137 | port = adapter->port[port_num]; |
| 1138 | memset(&port->stats, 0, sizeof(port->stats)); |
| 1139 | } |
| 1140 | } |
| 1141 | |
| 1142 | int |
| 1143 | netxen_nic_clear_statistics(struct netxen_adapter *adapter, |
| 1144 | struct netxen_port *port) |
| 1145 | { |
| 1146 | int data = 0; |
| 1147 | |
| 1148 | netxen_nic_pci_change_crbwindow(adapter, 0); |
| 1149 | |
| 1150 | netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_TX_BYTE_CNT, &data); |
| 1151 | netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_TX_FRAME_CNT, |
| 1152 | &data); |
| 1153 | netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_RX_BYTE_CNT, &data); |
| 1154 | netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_RX_FRAME_CNT, |
| 1155 | &data); |
| 1156 | netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_AGGR_ERROR_CNT, |
| 1157 | &data); |
| 1158 | netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_CRC_ERROR_CNT, |
| 1159 | &data); |
| 1160 | netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_OVERSIZE_FRAME_ERR, |
| 1161 | &data); |
| 1162 | netxen_nic_locked_write_reg(adapter, NETXEN_NIU_XGE_UNDERSIZE_FRAME_ERR, |
| 1163 | &data); |
| 1164 | |
| 1165 | netxen_nic_pci_change_crbwindow(adapter, 1); |
| 1166 | netxen_nic_clear_stats(adapter); |
| 1167 | return 0; |
| 1168 | } |
| 1169 | |
| 1170 | int |
| 1171 | netxen_nic_do_ioctl(struct netxen_adapter *adapter, void *u_data, |
| 1172 | struct netxen_port *port) |
| 1173 | { |
| 1174 | struct netxen_nic_ioctl_data data; |
| 1175 | struct netxen_nic_ioctl_data *up_data; |
| 1176 | int retval = 0; |
| 1177 | struct netxen_statistics netxen_stats; |
| 1178 | |
| 1179 | up_data = (void *)u_data; |
| 1180 | |
| 1181 | DPRINTK(INFO, "doing ioctl for %p\n", adapter); |
| 1182 | if (copy_from_user(&data, (void __user *)up_data, sizeof(data))) { |
| 1183 | /* evil user tried to crash the kernel */ |
| 1184 | DPRINTK(ERR, "bad copy from userland: %d\n", (int)sizeof(data)); |
| 1185 | retval = -EFAULT; |
| 1186 | goto error_out; |
| 1187 | } |
| 1188 | |
| 1189 | /* Shouldn't access beyond legal limits of "char u[64];" member */ |
| 1190 | if (!data.ptr && (data.size > sizeof(data.u))) { |
| 1191 | /* evil user tried to crash the kernel */ |
| 1192 | DPRINTK(ERR, "bad size: %d\n", data.size); |
| 1193 | retval = -EFAULT; |
| 1194 | goto error_out; |
| 1195 | } |
| 1196 | |
| 1197 | switch (data.cmd) { |
| 1198 | case netxen_nic_cmd_pci_read: |
| 1199 | if ((retval = netxen_nic_hw_read_wx(adapter, data.off, |
| 1200 | &(data.u), data.size))) |
| 1201 | goto error_out; |
| 1202 | if (copy_to_user |
| 1203 | ((void __user *)&(up_data->u), &(data.u), data.size)) { |
| 1204 | DPRINTK(ERR, "bad copy to userland: %d\n", |
| 1205 | (int)sizeof(data)); |
| 1206 | retval = -EFAULT; |
| 1207 | goto error_out; |
| 1208 | } |
| 1209 | data.rv = 0; |
| 1210 | break; |
| 1211 | |
| 1212 | case netxen_nic_cmd_pci_write: |
| 1213 | data.rv = netxen_nic_hw_write_wx(adapter, data.off, &(data.u), |
| 1214 | data.size); |
| 1215 | break; |
| 1216 | |
| 1217 | case netxen_nic_cmd_pci_config_read: |
| 1218 | switch (data.size) { |
| 1219 | case 1: |
| 1220 | data.rv = pci_read_config_byte(adapter->ahw.pdev, |
| 1221 | data.off, |
| 1222 | (char *)&(data.u)); |
| 1223 | break; |
| 1224 | case 2: |
| 1225 | data.rv = pci_read_config_word(adapter->ahw.pdev, |
| 1226 | data.off, |
| 1227 | (short *)&(data.u)); |
| 1228 | break; |
| 1229 | case 4: |
| 1230 | data.rv = pci_read_config_dword(adapter->ahw.pdev, |
| 1231 | data.off, |
| 1232 | (u32 *) & (data.u)); |
| 1233 | break; |
| 1234 | } |
| 1235 | if (copy_to_user |
| 1236 | ((void __user *)&(up_data->u), &(data.u), data.size)) { |
| 1237 | DPRINTK(ERR, "bad copy to userland: %d\n", |
| 1238 | (int)sizeof(data)); |
| 1239 | retval = -EFAULT; |
| 1240 | goto error_out; |
| 1241 | } |
| 1242 | break; |
| 1243 | |
| 1244 | case netxen_nic_cmd_pci_config_write: |
| 1245 | switch (data.size) { |
| 1246 | case 1: |
| 1247 | data.rv = pci_write_config_byte(adapter->ahw.pdev, |
| 1248 | data.off, |
| 1249 | *(char *)&(data.u)); |
| 1250 | break; |
| 1251 | case 2: |
| 1252 | data.rv = pci_write_config_word(adapter->ahw.pdev, |
| 1253 | data.off, |
| 1254 | *(short *)&(data.u)); |
| 1255 | break; |
| 1256 | case 4: |
| 1257 | data.rv = pci_write_config_dword(adapter->ahw.pdev, |
| 1258 | data.off, |
| 1259 | *(u32 *) & (data.u)); |
| 1260 | break; |
| 1261 | } |
| 1262 | break; |
| 1263 | |
| 1264 | case netxen_nic_cmd_get_stats: |
| 1265 | data.rv = |
| 1266 | netxen_nic_fill_statistics(adapter, port, &netxen_stats); |
| 1267 | if (copy_to_user |
| 1268 | ((void __user *)(up_data->ptr), (void *)&netxen_stats, |
| 1269 | sizeof(struct netxen_statistics))) { |
| 1270 | DPRINTK(ERR, "bad copy to userland: %d\n", |
| 1271 | (int)sizeof(netxen_stats)); |
| 1272 | retval = -EFAULT; |
| 1273 | goto error_out; |
| 1274 | } |
| 1275 | up_data->rv = data.rv; |
| 1276 | break; |
| 1277 | |
| 1278 | case netxen_nic_cmd_clear_stats: |
| 1279 | data.rv = netxen_nic_clear_statistics(adapter, port); |
| 1280 | up_data->rv = data.rv; |
| 1281 | break; |
| 1282 | |
| 1283 | case netxen_nic_cmd_get_version: |
| 1284 | if (copy_to_user |
| 1285 | ((void __user *)&(up_data->u), NETXEN_NIC_LINUX_VERSIONID, |
| 1286 | sizeof(NETXEN_NIC_LINUX_VERSIONID))) { |
| 1287 | DPRINTK(ERR, "bad copy to userland: %d\n", |
| 1288 | (int)sizeof(data)); |
| 1289 | retval = -EFAULT; |
| 1290 | goto error_out; |
| 1291 | } |
| 1292 | break; |
| 1293 | |
| 1294 | default: |
| 1295 | DPRINTK(INFO, "bad command %d for %p\n", data.cmd, adapter); |
| 1296 | retval = -EOPNOTSUPP; |
| 1297 | goto error_out; |
| 1298 | } |
| 1299 | put_user(data.rv, (u16 __user *) (&(up_data->rv))); |
| 1300 | DPRINTK(INFO, "done ioctl for %p well.\n", adapter); |
| 1301 | |
| 1302 | error_out: |
| 1303 | return retval; |
| 1304 | } |