blob: c589d23e7f914e6301bc39b7ed0d91f4c30ee7a3 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/video/cyber2000fb.c
3 *
4 * Copyright (C) 1998-2002 Russell King
5 *
6 * MIPS and 50xx clock support
7 * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
8 *
9 * 32 bit support, text color and panning fixes for modes != 8 bit
10 * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
17 *
18 * Based on cyberfb.c.
19 *
20 * Note that we now use the new fbcon fix, var and cmap scheme. We do
21 * still have to check which console is the currently displayed one
22 * however, especially for the colourmap stuff.
23 *
24 * We also use the new hotplug PCI subsystem. I'm not sure if there
25 * are any such cards, but I'm erring on the side of caution. We don't
26 * want to go pop just because someone does have one.
27 *
28 * Note that this doesn't work fully in the case of multiple CyberPro
29 * cards with grabbers. We currently can only attach to the first
30 * CyberPro card found.
31 *
32 * When we're in truecolour mode, we power down the LUT RAM as a power
33 * saving feature. Also, when we enter any of the powersaving modes
34 * (except soft blanking) we power down the RAMDACs. This saves about
35 * 1W, which is roughly 8% of the power consumption of a NetWinder
36 * (which, incidentally, is about the same saving as a 2.5in hard disk
37 * entering standby mode.)
38 */
39#include <linux/config.h>
40#include <linux/module.h>
41#include <linux/kernel.h>
42#include <linux/errno.h>
43#include <linux/string.h>
44#include <linux/mm.h>
45#include <linux/tty.h>
46#include <linux/slab.h>
47#include <linux/delay.h>
48#include <linux/fb.h>
49#include <linux/pci.h>
50#include <linux/init.h>
51
52#include <asm/io.h>
53#include <asm/irq.h>
54#include <asm/pgtable.h>
55#include <asm/system.h>
56#include <asm/uaccess.h>
57
58#ifdef __arm__
59#include <asm/mach-types.h>
60#endif
61
62#include "cyber2000fb.h"
63
64struct cfb_info {
65 struct fb_info fb;
66 struct display_switch *dispsw;
67 struct display *display;
68 struct pci_dev *dev;
69 unsigned char __iomem *region;
70 unsigned char __iomem *regs;
71 u_int id;
72 int func_use_count;
73 u_long ref_ps;
74
75 /*
76 * Clock divisors
77 */
78 u_int divisors[4];
79
80 struct {
81 u8 red, green, blue;
82 } palette[NR_PALETTE];
83
84 u_char mem_ctl1;
85 u_char mem_ctl2;
86 u_char mclk_mult;
87 u_char mclk_div;
88 /*
89 * RAMDAC control register is both of these or'ed together
90 */
91 u_char ramdac_ctrl;
92 u_char ramdac_powerdown;
Russell Kingeca02b02005-05-03 12:23:56 +010093
94 u32 pseudo_palette[16];
Linus Torvalds1da177e2005-04-16 15:20:36 -070095};
96
97static char *default_font = "Acorn8x8";
98module_param(default_font, charp, 0);
99MODULE_PARM_DESC(default_font, "Default font name");
100
101/*
102 * Our access methods.
103 */
104#define cyber2000fb_writel(val,reg,cfb) writel(val, (cfb)->regs + (reg))
105#define cyber2000fb_writew(val,reg,cfb) writew(val, (cfb)->regs + (reg))
106#define cyber2000fb_writeb(val,reg,cfb) writeb(val, (cfb)->regs + (reg))
107
108#define cyber2000fb_readb(reg,cfb) readb((cfb)->regs + (reg))
109
110static inline void
111cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
112{
113 cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
114}
115
116static inline void
117cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
118{
119 cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
120}
121
122static inline unsigned int
123cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
124{
125 cyber2000fb_writeb(reg, 0x3ce, cfb);
126 return cyber2000fb_readb(0x3cf, cfb);
127}
128
129static inline void
130cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
131{
132 cyber2000fb_readb(0x3da, cfb);
133 cyber2000fb_writeb(reg, 0x3c0, cfb);
134 cyber2000fb_readb(0x3c1, cfb);
135 cyber2000fb_writeb(val, 0x3c0, cfb);
136}
137
138static inline void
139cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
140{
141 cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
142}
143
144/* -------------------- Hardware specific routines ------------------------- */
145
146/*
147 * Hardware Cyber2000 Acceleration
148 */
149static void
150cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
151{
152 struct cfb_info *cfb = (struct cfb_info *)info;
153 unsigned long dst, col;
154
155 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
156 cfb_fillrect(info, rect);
157 return;
158 }
159
160 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
161 cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
162 cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
163
164 col = rect->color;
165 if (cfb->fb.var.bits_per_pixel > 8)
166 col = ((u32 *)cfb->fb.pseudo_palette)[col];
167 cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
168
169 dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
170 if (cfb->fb.var.bits_per_pixel == 24) {
171 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
172 dst *= 3;
173 }
174
175 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
176 cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
177 cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
178 cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
179}
180
181static void
182cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
183{
184 struct cfb_info *cfb = (struct cfb_info *)info;
185 unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
186 unsigned long src, dst;
187
188 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
189 cfb_copyarea(info, region);
190 return;
191 }
192
193 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
194 cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
195 cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
196
197 src = region->sx + region->sy * cfb->fb.var.xres_virtual;
198 dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
199
200 if (region->sx < region->dx) {
201 src += region->width - 1;
202 dst += region->width - 1;
203 cmd |= CO_CMD_L_INC_LEFT;
204 }
205
206 if (region->sy < region->dy) {
207 src += (region->height - 1) * cfb->fb.var.xres_virtual;
208 dst += (region->height - 1) * cfb->fb.var.xres_virtual;
209 cmd |= CO_CMD_L_INC_UP;
210 }
211
212 if (cfb->fb.var.bits_per_pixel == 24) {
213 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
214 src *= 3;
215 dst *= 3;
216 }
217 cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
218 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
219 cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
220 cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
221 cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
222 CO_REG_CMD_H, cfb);
223}
224
225static void
226cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
227{
228// struct cfb_info *cfb = (struct cfb_info *)info;
229
230// if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
231 cfb_imageblit(info, image);
232 return;
233// }
234}
235
236static int cyber2000fb_sync(struct fb_info *info)
237{
238 struct cfb_info *cfb = (struct cfb_info *)info;
239 int count = 100000;
240
241 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
242 return 0;
243
244 while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
245 if (!count--) {
246 debug_printf("accel_wait timed out\n");
247 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
248 break;
249 }
250 udelay(1);
251 }
252 return 0;
253}
254
255/*
256 * ===========================================================================
257 */
258
259static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
260{
261 u_int mask = (1 << bf->length) - 1;
262
263 return (val >> (16 - bf->length) & mask) << bf->offset;
264}
265
266/*
267 * Set a single color register. Return != 0 for invalid regno.
268 */
269static int
270cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
271 u_int transp, struct fb_info *info)
272{
273 struct cfb_info *cfb = (struct cfb_info *)info;
274 struct fb_var_screeninfo *var = &cfb->fb.var;
275 u32 pseudo_val;
276 int ret = 1;
277
278 switch (cfb->fb.fix.visual) {
279 default:
280 return 1;
281
282 /*
283 * Pseudocolour:
284 * 8 8
285 * pixel --/--+--/--> red lut --> red dac
286 * | 8
287 * +--/--> green lut --> green dac
288 * | 8
289 * +--/--> blue lut --> blue dac
290 */
291 case FB_VISUAL_PSEUDOCOLOR:
292 if (regno >= NR_PALETTE)
293 return 1;
294
295 red >>= 8;
296 green >>= 8;
297 blue >>= 8;
298
299 cfb->palette[regno].red = red;
300 cfb->palette[regno].green = green;
301 cfb->palette[regno].blue = blue;
302
303 cyber2000fb_writeb(regno, 0x3c8, cfb);
304 cyber2000fb_writeb(red, 0x3c9, cfb);
305 cyber2000fb_writeb(green, 0x3c9, cfb);
306 cyber2000fb_writeb(blue, 0x3c9, cfb);
307 return 0;
308
309 /*
310 * Direct colour:
311 * n rl
312 * pixel --/--+--/--> red lut --> red dac
313 * | gl
314 * +--/--> green lut --> green dac
315 * | bl
316 * +--/--> blue lut --> blue dac
317 * n = bpp, rl = red length, gl = green length, bl = blue length
318 */
319 case FB_VISUAL_DIRECTCOLOR:
320 red >>= 8;
321 green >>= 8;
322 blue >>= 8;
323
324 if (var->green.length == 6 && regno < 64) {
325 cfb->palette[regno << 2].green = green;
326
327 /*
328 * The 6 bits of the green component are applied
329 * to the high 6 bits of the LUT.
330 */
331 cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
332 cyber2000fb_writeb(cfb->palette[regno >> 1].red, 0x3c9, cfb);
333 cyber2000fb_writeb(green, 0x3c9, cfb);
334 cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 0x3c9, cfb);
335
336 green = cfb->palette[regno << 3].green;
337
338 ret = 0;
339 }
340
341 if (var->green.length >= 5 && regno < 32) {
342 cfb->palette[regno << 3].red = red;
343 cfb->palette[regno << 3].green = green;
344 cfb->palette[regno << 3].blue = blue;
345
346 /*
347 * The 5 bits of each colour component are
348 * applied to the high 5 bits of the LUT.
349 */
350 cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
351 cyber2000fb_writeb(red, 0x3c9, cfb);
352 cyber2000fb_writeb(green, 0x3c9, cfb);
353 cyber2000fb_writeb(blue, 0x3c9, cfb);
354 ret = 0;
355 }
356
357 if (var->green.length == 4 && regno < 16) {
358 cfb->palette[regno << 4].red = red;
359 cfb->palette[regno << 4].green = green;
360 cfb->palette[regno << 4].blue = blue;
361
362 /*
363 * The 5 bits of each colour component are
364 * applied to the high 5 bits of the LUT.
365 */
366 cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
367 cyber2000fb_writeb(red, 0x3c9, cfb);
368 cyber2000fb_writeb(green, 0x3c9, cfb);
369 cyber2000fb_writeb(blue, 0x3c9, cfb);
370 ret = 0;
371 }
372
373 /*
374 * Since this is only used for the first 16 colours, we
375 * don't have to care about overflowing for regno >= 32
376 */
377 pseudo_val = regno << var->red.offset |
378 regno << var->green.offset |
379 regno << var->blue.offset;
380 break;
381
382 /*
383 * True colour:
384 * n rl
385 * pixel --/--+--/--> red dac
386 * | gl
387 * +--/--> green dac
388 * | bl
389 * +--/--> blue dac
390 * n = bpp, rl = red length, gl = green length, bl = blue length
391 */
392 case FB_VISUAL_TRUECOLOR:
393 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
394 pseudo_val |= convert_bitfield(red, &var->red);
395 pseudo_val |= convert_bitfield(green, &var->green);
396 pseudo_val |= convert_bitfield(blue, &var->blue);
397 break;
398 }
399
400 /*
401 * Now set our pseudo palette for the CFB16/24/32 drivers.
402 */
403 if (regno < 16)
404 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
405
406 return ret;
407}
408
409struct par_info {
410 /*
411 * Hardware
412 */
413 u_char clock_mult;
414 u_char clock_div;
415 u_char extseqmisc;
416 u_char co_pixfmt;
417 u_char crtc_ofl;
418 u_char crtc[19];
419 u_int width;
420 u_int pitch;
421 u_int fetch;
422
423 /*
424 * Other
425 */
426 u_char ramdac;
427};
428
429static const u_char crtc_idx[] = {
430 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
431 0x08, 0x09,
432 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
433};
434
435static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
436{
437 unsigned int i;
438 unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
439
440 cyber2000fb_writeb(0x56, 0x3ce, cfb);
441 i = cyber2000fb_readb(0x3cf, cfb);
442 cyber2000fb_writeb(i | 4, 0x3cf, cfb);
443 cyber2000fb_writeb(val, 0x3c6, cfb);
444 cyber2000fb_writeb(i, 0x3cf, cfb);
445}
446
447static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
448{
449 u_int i;
450
451 /*
452 * Blank palette
453 */
454 for (i = 0; i < NR_PALETTE; i++) {
455 cyber2000fb_writeb(i, 0x3c8, cfb);
456 cyber2000fb_writeb(0, 0x3c9, cfb);
457 cyber2000fb_writeb(0, 0x3c9, cfb);
458 cyber2000fb_writeb(0, 0x3c9, cfb);
459 }
460
461 cyber2000fb_writeb(0xef, 0x3c2, cfb);
462 cyber2000_crtcw(0x11, 0x0b, cfb);
463 cyber2000_attrw(0x11, 0x00, cfb);
464
465 cyber2000_seqw(0x00, 0x01, cfb);
466 cyber2000_seqw(0x01, 0x01, cfb);
467 cyber2000_seqw(0x02, 0x0f, cfb);
468 cyber2000_seqw(0x03, 0x00, cfb);
469 cyber2000_seqw(0x04, 0x0e, cfb);
470 cyber2000_seqw(0x00, 0x03, cfb);
471
472 for (i = 0; i < sizeof(crtc_idx); i++)
473 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
474
475 for (i = 0x0a; i < 0x10; i++)
476 cyber2000_crtcw(i, 0, cfb);
477
478 cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
479 cyber2000_grphw(0x00, 0x00, cfb);
480 cyber2000_grphw(0x01, 0x00, cfb);
481 cyber2000_grphw(0x02, 0x00, cfb);
482 cyber2000_grphw(0x03, 0x00, cfb);
483 cyber2000_grphw(0x04, 0x00, cfb);
484 cyber2000_grphw(0x05, 0x60, cfb);
485 cyber2000_grphw(0x06, 0x05, cfb);
486 cyber2000_grphw(0x07, 0x0f, cfb);
487 cyber2000_grphw(0x08, 0xff, cfb);
488
489 /* Attribute controller registers */
490 for (i = 0; i < 16; i++)
491 cyber2000_attrw(i, i, cfb);
492
493 cyber2000_attrw(0x10, 0x01, cfb);
494 cyber2000_attrw(0x11, 0x00, cfb);
495 cyber2000_attrw(0x12, 0x0f, cfb);
496 cyber2000_attrw(0x13, 0x00, cfb);
497 cyber2000_attrw(0x14, 0x00, cfb);
498
499 /* PLL registers */
500 cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
501 cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
502 cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
503 cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
504 cyber2000_grphw(0x90, 0x01, cfb);
505 cyber2000_grphw(0xb9, 0x80, cfb);
506 cyber2000_grphw(0xb9, 0x00, cfb);
507
508 cfb->ramdac_ctrl = hw->ramdac;
509 cyber2000fb_write_ramdac_ctrl(cfb);
510
511 cyber2000fb_writeb(0x20, 0x3c0, cfb);
512 cyber2000fb_writeb(0xff, 0x3c6, cfb);
513
514 cyber2000_grphw(0x14, hw->fetch, cfb);
515 cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
516 ((hw->pitch >> 4) & 0x30), cfb);
517 cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
518
519 /*
520 * Set up accelerator registers
521 */
522 cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
523 cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
524 cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
525}
526
527static inline int
528cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
529{
530 u_int base = var->yoffset * var->xres_virtual + var->xoffset;
531
532 base *= var->bits_per_pixel;
533
534 /*
535 * Convert to bytes and shift two extra bits because DAC
536 * can only start on 4 byte aligned data.
537 */
538 base >>= 5;
539
540 if (base >= 1 << 20)
541 return -EINVAL;
542
543 cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
544 cyber2000_crtcw(0x0c, base >> 8, cfb);
545 cyber2000_crtcw(0x0d, base, cfb);
546
547 return 0;
548}
549
550static int
551cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
552 struct fb_var_screeninfo *var)
553{
554 u_int Htotal, Hblankend, Hsyncend;
555 u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
556#define BIT(v,b1,m,b2) (((v >> b1) & m) << b2)
557
558 hw->crtc[13] = hw->pitch;
559 hw->crtc[17] = 0xe3;
560 hw->crtc[14] = 0;
561 hw->crtc[8] = 0;
562
563 Htotal = var->xres + var->right_margin +
564 var->hsync_len + var->left_margin;
565
566 if (Htotal > 2080)
567 return -EINVAL;
568
569 hw->crtc[0] = (Htotal >> 3) - 5;
570 hw->crtc[1] = (var->xres >> 3) - 1;
571 hw->crtc[2] = var->xres >> 3;
572 hw->crtc[4] = (var->xres + var->right_margin) >> 3;
573
574 Hblankend = (Htotal - 4*8) >> 3;
575
576 hw->crtc[3] = BIT(Hblankend, 0, 0x1f, 0) |
577 BIT(1, 0, 0x01, 7);
578
579 Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3;
580
581 hw->crtc[5] = BIT(Hsyncend, 0, 0x1f, 0) |
582 BIT(Hblankend, 5, 0x01, 7);
583
584 Vdispend = var->yres - 1;
585 Vsyncstart = var->yres + var->lower_margin;
586 Vsyncend = var->yres + var->lower_margin + var->vsync_len;
587 Vtotal = var->yres + var->lower_margin + var->vsync_len +
588 var->upper_margin - 2;
589
590 if (Vtotal > 2047)
591 return -EINVAL;
592
593 Vblankstart = var->yres + 6;
594 Vblankend = Vtotal - 10;
595
596 hw->crtc[6] = Vtotal;
597 hw->crtc[7] = BIT(Vtotal, 8, 0x01, 0) |
598 BIT(Vdispend, 8, 0x01, 1) |
599 BIT(Vsyncstart, 8, 0x01, 2) |
600 BIT(Vblankstart,8, 0x01, 3) |
601 BIT(1, 0, 0x01, 4) |
602 BIT(Vtotal, 9, 0x01, 5) |
603 BIT(Vdispend, 9, 0x01, 6) |
604 BIT(Vsyncstart, 9, 0x01, 7);
605 hw->crtc[9] = BIT(0, 0, 0x1f, 0) |
606 BIT(Vblankstart,9, 0x01, 5) |
607 BIT(1, 0, 0x01, 6);
608 hw->crtc[10] = Vsyncstart;
609 hw->crtc[11] = BIT(Vsyncend, 0, 0x0f, 0) |
610 BIT(1, 0, 0x01, 7);
611 hw->crtc[12] = Vdispend;
612 hw->crtc[15] = Vblankstart;
613 hw->crtc[16] = Vblankend;
614 hw->crtc[18] = 0xff;
615
616 /*
617 * overflow - graphics reg 0x11
618 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
619 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
620 */
621 hw->crtc_ofl =
622 BIT(Vtotal, 10, 0x01, 0) |
623 BIT(Vdispend, 10, 0x01, 1) |
624 BIT(Vsyncstart, 10, 0x01, 2) |
625 BIT(Vblankstart,10, 0x01, 3) |
626 EXT_CRT_VRTOFL_LINECOMP10;
627
628 /* woody: set the interlaced bit... */
629 /* FIXME: what about doublescan? */
630 if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
631 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
632
633 return 0;
634}
635
636/*
637 * The following was discovered by a good monitor, bit twiddling, theorising
638 * and but mostly luck. Strangely, it looks like everyone elses' PLL!
639 *
640 * Clock registers:
641 * fclock = fpll / div2
642 * fpll = fref * mult / div1
643 * where:
644 * fref = 14.318MHz (69842ps)
645 * mult = reg0xb0.7:0
646 * div1 = (reg0xb1.5:0 + 1)
647 * div2 = 2^(reg0xb1.7:6)
648 * fpll should be between 115 and 260 MHz
649 * (8696ps and 3846ps)
650 */
651static int
652cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
653 struct fb_var_screeninfo *var)
654{
655 u_long pll_ps = var->pixclock;
656 const u_long ref_ps = cfb->ref_ps;
657 u_int div2, t_div1, best_div1, best_mult;
658 int best_diff;
659 int vco;
660
661 /*
662 * Step 1:
663 * find div2 such that 115MHz < fpll < 260MHz
664 * and 0 <= div2 < 4
665 */
666 for (div2 = 0; div2 < 4; div2++) {
667 u_long new_pll;
668
669 new_pll = pll_ps / cfb->divisors[div2];
670 if (8696 > new_pll && new_pll > 3846) {
671 pll_ps = new_pll;
672 break;
673 }
674 }
675
676 if (div2 == 4)
677 return -EINVAL;
678
679 /*
680 * Step 2:
681 * Given pll_ps and ref_ps, find:
682 * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
683 * where { 1 < best_div1 < 32, 1 < best_mult < 256 }
684 * pll_ps_calc = best_div1 / (ref_ps * best_mult)
685 */
686 best_diff = 0x7fffffff;
687 best_mult = 32;
688 best_div1 = 255;
689 for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) {
690 u_int rr, t_mult, t_pll_ps;
691 int diff;
692
693 /*
694 * Find the multiplier for this divisor
695 */
696 rr = ref_ps * t_div1;
697 t_mult = (rr + pll_ps / 2) / pll_ps;
698
699 /*
700 * Is the multiplier within the correct range?
701 */
702 if (t_mult > 256 || t_mult < 2)
703 continue;
704
705 /*
706 * Calculate the actual clock period from this multiplier
707 * and divisor, and estimate the error.
708 */
709 t_pll_ps = (rr + t_mult / 2) / t_mult;
710 diff = pll_ps - t_pll_ps;
711 if (diff < 0)
712 diff = -diff;
713
714 if (diff < best_diff) {
715 best_diff = diff;
716 best_mult = t_mult;
717 best_div1 = t_div1;
718 }
719
720 /*
721 * If we hit an exact value, there is no point in continuing.
722 */
723 if (diff == 0)
724 break;
725 }
726
727 /*
728 * Step 3:
729 * combine values
730 */
731 hw->clock_mult = best_mult - 1;
732 hw->clock_div = div2 << 6 | (best_div1 - 1);
733
734 vco = ref_ps * best_div1 / best_mult;
735 if ((ref_ps == 40690) && (vco < 5556))
736 /* Set VFSEL when VCO > 180MHz (5.556 ps). */
737 hw->clock_div |= EXT_DCLK_DIV_VFSEL;
738
739 return 0;
740}
741
742/*
743 * Set the User Defined Part of the Display
744 */
745static int
746cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
747{
748 struct cfb_info *cfb = (struct cfb_info *)info;
749 struct par_info hw;
750 unsigned int mem;
751 int err;
752
753 var->transp.msb_right = 0;
754 var->red.msb_right = 0;
755 var->green.msb_right = 0;
756 var->blue.msb_right = 0;
757
758 switch (var->bits_per_pixel) {
759 case 8: /* PSEUDOCOLOUR, 256 */
760 var->transp.offset = 0;
761 var->transp.length = 0;
762 var->red.offset = 0;
763 var->red.length = 8;
764 var->green.offset = 0;
765 var->green.length = 8;
766 var->blue.offset = 0;
767 var->blue.length = 8;
768 break;
769
770 case 16:/* DIRECTCOLOUR, 64k or 32k */
771 switch (var->green.length) {
772 case 6: /* RGB565, 64k */
773 var->transp.offset = 0;
774 var->transp.length = 0;
775 var->red.offset = 11;
776 var->red.length = 5;
777 var->green.offset = 5;
778 var->green.length = 6;
779 var->blue.offset = 0;
780 var->blue.length = 5;
781 break;
782
783 default:
784 case 5: /* RGB555, 32k */
785 var->transp.offset = 0;
786 var->transp.length = 0;
787 var->red.offset = 10;
788 var->red.length = 5;
789 var->green.offset = 5;
790 var->green.length = 5;
791 var->blue.offset = 0;
792 var->blue.length = 5;
793 break;
794
795 case 4: /* RGB444, 4k + transparency? */
796 var->transp.offset = 12;
797 var->transp.length = 4;
798 var->red.offset = 8;
799 var->red.length = 4;
800 var->green.offset = 4;
801 var->green.length = 4;
802 var->blue.offset = 0;
803 var->blue.length = 4;
804 break;
805 }
806 break;
807
808 case 24:/* TRUECOLOUR, 16m */
809 var->transp.offset = 0;
810 var->transp.length = 0;
811 var->red.offset = 16;
812 var->red.length = 8;
813 var->green.offset = 8;
814 var->green.length = 8;
815 var->blue.offset = 0;
816 var->blue.length = 8;
817 break;
818
819 case 32:/* TRUECOLOUR, 16m */
820 var->transp.offset = 24;
821 var->transp.length = 8;
822 var->red.offset = 16;
823 var->red.length = 8;
824 var->green.offset = 8;
825 var->green.length = 8;
826 var->blue.offset = 0;
827 var->blue.length = 8;
828 break;
829
830 default:
831 return -EINVAL;
832 }
833
834 mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
835 if (mem > cfb->fb.fix.smem_len)
836 var->yres_virtual = cfb->fb.fix.smem_len * 8 /
837 (var->bits_per_pixel * var->xres_virtual);
838
839 if (var->yres > var->yres_virtual)
840 var->yres = var->yres_virtual;
841 if (var->xres > var->xres_virtual)
842 var->xres = var->xres_virtual;
843
844 err = cyber2000fb_decode_clock(&hw, cfb, var);
845 if (err)
846 return err;
847
848 err = cyber2000fb_decode_crtc(&hw, cfb, var);
849 if (err)
850 return err;
851
852 return 0;
853}
854
855static int cyber2000fb_set_par(struct fb_info *info)
856{
857 struct cfb_info *cfb = (struct cfb_info *)info;
858 struct fb_var_screeninfo *var = &cfb->fb.var;
859 struct par_info hw;
860 unsigned int mem;
861
862 hw.width = var->xres_virtual;
863 hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
864
865 switch (var->bits_per_pixel) {
866 case 8:
867 hw.co_pixfmt = CO_PIXFMT_8BPP;
868 hw.pitch = hw.width >> 3;
869 hw.extseqmisc = EXT_SEQ_MISC_8;
870 break;
871
872 case 16:
873 hw.co_pixfmt = CO_PIXFMT_16BPP;
874 hw.pitch = hw.width >> 2;
875
876 switch (var->green.length) {
877 case 6: /* RGB565, 64k */
878 hw.extseqmisc = EXT_SEQ_MISC_16_RGB565;
879 break;
880 case 5: /* RGB555, 32k */
881 hw.extseqmisc = EXT_SEQ_MISC_16_RGB555;
882 break;
883 case 4: /* RGB444, 4k + transparency? */
884 hw.extseqmisc = EXT_SEQ_MISC_16_RGB444;
885 break;
886 default:
887 BUG();
888 }
889 case 24:/* TRUECOLOUR, 16m */
890 hw.co_pixfmt = CO_PIXFMT_24BPP;
891 hw.width *= 3;
892 hw.pitch = hw.width >> 3;
893 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
894 hw.extseqmisc = EXT_SEQ_MISC_24_RGB888;
895 break;
896
897 case 32:/* TRUECOLOUR, 16m */
898 hw.co_pixfmt = CO_PIXFMT_32BPP;
899 hw.pitch = hw.width >> 1;
900 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
901 hw.extseqmisc = EXT_SEQ_MISC_32;
902 break;
903
904 default:
905 BUG();
906 }
907
908 /*
909 * Sigh, this is absolutely disgusting, but caused by
910 * the way the fbcon developers want to separate out
911 * the "checking" and the "setting" of the video mode.
912 *
913 * If the mode is not suitable for the hardware here,
914 * we can't prevent it being set by returning an error.
915 *
916 * In theory, since NetWinders contain just one VGA card,
917 * we should never end up hitting this problem.
918 */
919 BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
920 BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
921
922 hw.width -= 1;
923 hw.fetch = hw.pitch;
924 if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
925 hw.fetch <<= 1;
926 hw.fetch += 1;
927
928 cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
929
930 /*
931 * Same here - if the size of the video mode exceeds the
932 * available RAM, we can't prevent this mode being set.
933 *
934 * In theory, since NetWinders contain just one VGA card,
935 * we should never end up hitting this problem.
936 */
937 mem = cfb->fb.fix.line_length * var->yres_virtual;
938 BUG_ON(mem > cfb->fb.fix.smem_len);
939
940 /*
941 * 8bpp displays are always pseudo colour. 16bpp and above
942 * are direct colour or true colour, depending on whether
943 * the RAMDAC palettes are bypassed. (Direct colour has
944 * palettes, true colour does not.)
945 */
946 if (var->bits_per_pixel == 8)
947 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
948 else if (hw.ramdac & RAMDAC_BYPASS)
949 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
950 else
951 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
952
953 cyber2000fb_set_timing(cfb, &hw);
954 cyber2000fb_update_start(cfb, var);
955
956 return 0;
957}
958
959
960/*
961 * Pan or Wrap the Display
962 */
963static int
964cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
965{
966 struct cfb_info *cfb = (struct cfb_info *)info;
967
968 if (cyber2000fb_update_start(cfb, var))
969 return -EINVAL;
970
971 cfb->fb.var.xoffset = var->xoffset;
972 cfb->fb.var.yoffset = var->yoffset;
973
974 if (var->vmode & FB_VMODE_YWRAP) {
975 cfb->fb.var.vmode |= FB_VMODE_YWRAP;
976 } else {
977 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
978 }
979
980 return 0;
981}
982
983/*
984 * (Un)Blank the display.
985 *
986 * Blank the screen if blank_mode != 0, else unblank. If
987 * blank == NULL then the caller blanks by setting the CLUT
988 * (Color Look Up Table) to all black. Return 0 if blanking
989 * succeeded, != 0 if un-/blanking failed due to e.g. a
990 * video mode which doesn't support it. Implements VESA
991 * suspend and powerdown modes on hardware that supports
992 * disabling hsync/vsync:
993 * blank_mode == 2: suspend vsync
994 * blank_mode == 3: suspend hsync
995 * blank_mode == 4: powerdown
996 *
997 * wms...Enable VESA DMPS compatible powerdown mode
998 * run "setterm -powersave powerdown" to take advantage
999 */
1000static int cyber2000fb_blank(int blank, struct fb_info *info)
1001{
1002 struct cfb_info *cfb = (struct cfb_info *)info;
1003 unsigned int sync = 0;
1004 int i;
1005
1006 switch (blank) {
1007 case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
1008 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
1009 break;
1010 case FB_BLANK_HSYNC_SUSPEND: /* hsync off */
1011 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
1012 break;
1013 case FB_BLANK_VSYNC_SUSPEND: /* vsync off */
1014 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
1015 break;
1016 case FB_BLANK_NORMAL: /* soft blank */
1017 default: /* unblank */
1018 break;
1019 }
1020
1021 cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
1022
1023 if (blank <= 1) {
1024 /* turn on ramdacs */
1025 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
1026 cyber2000fb_write_ramdac_ctrl(cfb);
1027 }
1028
1029 /*
1030 * Soft blank/unblank the display.
1031 */
1032 if (blank) { /* soft blank */
1033 for (i = 0; i < NR_PALETTE; i++) {
1034 cyber2000fb_writeb(i, 0x3c8, cfb);
1035 cyber2000fb_writeb(0, 0x3c9, cfb);
1036 cyber2000fb_writeb(0, 0x3c9, cfb);
1037 cyber2000fb_writeb(0, 0x3c9, cfb);
1038 }
1039 } else { /* unblank */
1040 for (i = 0; i < NR_PALETTE; i++) {
1041 cyber2000fb_writeb(i, 0x3c8, cfb);
1042 cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
1043 cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
1044 cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
1045 }
1046 }
1047
1048 if (blank >= 2) {
1049 /* turn off ramdacs */
1050 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN;
1051 cyber2000fb_write_ramdac_ctrl(cfb);
1052 }
1053
1054 return 0;
1055}
1056
1057static struct fb_ops cyber2000fb_ops = {
1058 .owner = THIS_MODULE,
1059 .fb_check_var = cyber2000fb_check_var,
1060 .fb_set_par = cyber2000fb_set_par,
1061 .fb_setcolreg = cyber2000fb_setcolreg,
1062 .fb_blank = cyber2000fb_blank,
1063 .fb_pan_display = cyber2000fb_pan_display,
1064 .fb_fillrect = cyber2000fb_fillrect,
1065 .fb_copyarea = cyber2000fb_copyarea,
1066 .fb_imageblit = cyber2000fb_imageblit,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001067 .fb_sync = cyber2000fb_sync,
1068};
1069
1070/*
1071 * This is the only "static" reference to the internal data structures
1072 * of this driver. It is here solely at the moment to support the other
1073 * CyberPro modules external to this driver.
1074 */
1075static struct cfb_info *int_cfb_info;
1076
1077/*
1078 * Enable access to the extended registers
1079 */
1080void cyber2000fb_enable_extregs(struct cfb_info *cfb)
1081{
1082 cfb->func_use_count += 1;
1083
1084 if (cfb->func_use_count == 1) {
1085 int old;
1086
1087 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1088 old |= EXT_FUNC_CTL_EXTREGENBL;
1089 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1090 }
1091}
1092
1093/*
1094 * Disable access to the extended registers
1095 */
1096void cyber2000fb_disable_extregs(struct cfb_info *cfb)
1097{
1098 if (cfb->func_use_count == 1) {
1099 int old;
1100
1101 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1102 old &= ~EXT_FUNC_CTL_EXTREGENBL;
1103 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1104 }
1105
1106 if (cfb->func_use_count == 0)
1107 printk(KERN_ERR "disable_extregs: count = 0\n");
1108 else
1109 cfb->func_use_count -= 1;
1110}
1111
1112void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var)
1113{
1114 memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo));
1115}
1116
1117/*
1118 * Attach a capture/tv driver to the core CyberX0X0 driver.
1119 */
1120int cyber2000fb_attach(struct cyberpro_info *info, int idx)
1121{
1122 if (int_cfb_info != NULL) {
1123 info->dev = int_cfb_info->dev;
1124 info->regs = int_cfb_info->regs;
1125 info->fb = int_cfb_info->fb.screen_base;
1126 info->fb_size = int_cfb_info->fb.fix.smem_len;
1127 info->enable_extregs = cyber2000fb_enable_extregs;
1128 info->disable_extregs = cyber2000fb_disable_extregs;
1129 info->info = int_cfb_info;
1130
1131 strlcpy(info->dev_name, int_cfb_info->fb.fix.id, sizeof(info->dev_name));
1132 }
1133
1134 return int_cfb_info != NULL;
1135}
1136
1137/*
1138 * Detach a capture/tv driver from the core CyberX0X0 driver.
1139 */
1140void cyber2000fb_detach(int idx)
1141{
1142}
1143
1144EXPORT_SYMBOL(cyber2000fb_attach);
1145EXPORT_SYMBOL(cyber2000fb_detach);
1146EXPORT_SYMBOL(cyber2000fb_enable_extregs);
1147EXPORT_SYMBOL(cyber2000fb_disable_extregs);
1148EXPORT_SYMBOL(cyber2000fb_get_fb_var);
1149
1150/*
1151 * These parameters give
1152 * 640x480, hsync 31.5kHz, vsync 60Hz
1153 */
1154static struct fb_videomode __devinitdata cyber2000fb_default_mode = {
1155 .refresh = 60,
1156 .xres = 640,
1157 .yres = 480,
1158 .pixclock = 39722,
1159 .left_margin = 56,
1160 .right_margin = 16,
1161 .upper_margin = 34,
1162 .lower_margin = 9,
1163 .hsync_len = 88,
1164 .vsync_len = 2,
1165 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1166 .vmode = FB_VMODE_NONINTERLACED
1167};
1168
1169static char igs_regs[] = {
1170 EXT_CRT_IRQ, 0,
1171 EXT_CRT_TEST, 0,
1172 EXT_SYNC_CTL, 0,
1173 EXT_SEG_WRITE_PTR, 0,
1174 EXT_SEG_READ_PTR, 0,
1175 EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE |
1176 EXT_BIU_MISC_COP_ENABLE |
1177 EXT_BIU_MISC_COP_BFC,
1178 EXT_FUNC_CTL, 0,
1179 CURS_H_START, 0,
1180 CURS_H_START + 1, 0,
1181 CURS_H_PRESET, 0,
1182 CURS_V_START, 0,
1183 CURS_V_START + 1, 0,
1184 CURS_V_PRESET, 0,
1185 CURS_CTL, 0,
1186 EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT,
1187 EXT_OVERSCAN_RED, 0,
1188 EXT_OVERSCAN_GREEN, 0,
1189 EXT_OVERSCAN_BLUE, 0,
1190
1191 /* some of these are questionable when we have a BIOS */
1192 EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK |
1193 EXT_MEM_CTL0_RAS_1 |
1194 EXT_MEM_CTL0_MULTCAS,
1195 EXT_HIDDEN_CTL1, 0x30,
1196 EXT_FIFO_CTL, 0x0b,
1197 EXT_FIFO_CTL + 1, 0x17,
1198 0x76, 0x00,
1199 EXT_HIDDEN_CTL4, 0xc8
1200};
1201
1202/*
1203 * Initialise the CyberPro hardware. On the CyberPro5XXXX,
1204 * ensure that we're using the correct PLL (5XXX's may be
1205 * programmed to use an additional set of PLLs.)
1206 */
1207static void cyberpro_init_hw(struct cfb_info *cfb)
1208{
1209 int i;
1210
1211 for (i = 0; i < sizeof(igs_regs); i += 2)
1212 cyber2000_grphw(igs_regs[i], igs_regs[i+1], cfb);
1213
1214 if (cfb->id == ID_CYBERPRO_5000) {
1215 unsigned char val;
1216 cyber2000fb_writeb(0xba, 0x3ce, cfb);
1217 val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
1218 cyber2000fb_writeb(val, 0x3cf, cfb);
1219 }
1220}
1221
1222static struct cfb_info * __devinit
1223cyberpro_alloc_fb_info(unsigned int id, char *name)
1224{
1225 struct cfb_info *cfb;
1226
Russell Kingeca02b02005-05-03 12:23:56 +01001227 cfb = kmalloc(sizeof(struct cfb_info), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001228 if (!cfb)
1229 return NULL;
1230
1231 memset(cfb, 0, sizeof(struct cfb_info));
1232
1233 cfb->id = id;
1234
1235 if (id == ID_CYBERPRO_5000)
1236 cfb->ref_ps = 40690; // 24.576 MHz
1237 else
1238 cfb->ref_ps = 69842; // 14.31818 MHz (69841?)
1239
1240 cfb->divisors[0] = 1;
1241 cfb->divisors[1] = 2;
1242 cfb->divisors[2] = 4;
1243
1244 if (id == ID_CYBERPRO_2000)
1245 cfb->divisors[3] = 8;
1246 else
1247 cfb->divisors[3] = 6;
1248
1249 strcpy(cfb->fb.fix.id, name);
1250
1251 cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
1252 cfb->fb.fix.type_aux = 0;
1253 cfb->fb.fix.xpanstep = 0;
1254 cfb->fb.fix.ypanstep = 1;
1255 cfb->fb.fix.ywrapstep = 0;
1256
1257 switch (id) {
1258 case ID_IGA_1682:
1259 cfb->fb.fix.accel = 0;
1260 break;
1261
1262 case ID_CYBERPRO_2000:
1263 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
1264 break;
1265
1266 case ID_CYBERPRO_2010:
1267 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
1268 break;
1269
1270 case ID_CYBERPRO_5000:
1271 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
1272 break;
1273 }
1274
1275 cfb->fb.var.nonstd = 0;
1276 cfb->fb.var.activate = FB_ACTIVATE_NOW;
1277 cfb->fb.var.height = -1;
1278 cfb->fb.var.width = -1;
1279 cfb->fb.var.accel_flags = FB_ACCELF_TEXT;
1280
1281 cfb->fb.fbops = &cyber2000fb_ops;
1282 cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
Russell Kingeca02b02005-05-03 12:23:56 +01001283 cfb->fb.pseudo_palette = cfb->pseudo_palette;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001284
1285 fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
1286
1287 return cfb;
1288}
1289
1290static void
1291cyberpro_free_fb_info(struct cfb_info *cfb)
1292{
1293 if (cfb) {
1294 /*
1295 * Free the colourmap
1296 */
1297 fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
1298
1299 kfree(cfb);
1300 }
1301}
1302
1303/*
1304 * Parse Cyber2000fb options. Usage:
1305 * video=cyber2000:font:fontname
1306 */
1307#ifndef MODULE
1308static int
1309cyber2000fb_setup(char *options)
1310{
1311 char *opt;
1312
1313 if (!options || !*options)
1314 return 0;
1315
1316 while ((opt = strsep(&options, ",")) != NULL) {
1317 if (!*opt)
1318 continue;
1319
1320 if (strncmp(opt, "font:", 5) == 0) {
1321 static char default_font_storage[40];
1322
1323 strlcpy(default_font_storage, opt + 5, sizeof(default_font_storage));
1324 default_font = default_font_storage;
1325 continue;
1326 }
1327
1328 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
1329 }
1330 return 0;
1331}
1332#endif /* MODULE */
1333
1334/*
1335 * The CyberPro chips can be placed on many different bus types.
1336 * This probe function is common to all bus types. The bus-specific
1337 * probe function is expected to have:
1338 * - enabled access to the linear memory region
1339 * - memory mapped access to the registers
1340 * - initialised mem_ctl1 and mem_ctl2 appropriately.
1341 */
1342static int __devinit cyberpro_common_probe(struct cfb_info *cfb)
1343{
1344 u_long smem_size;
1345 u_int h_sync, v_sync;
1346 int err;
1347
1348 cyberpro_init_hw(cfb);
1349
1350 /*
1351 * Get the video RAM size and width from the VGA register.
1352 * This should have been already initialised by the BIOS,
1353 * but if it's garbage, claim default 1MB VRAM (woody)
1354 */
1355 cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
1356 cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
1357
1358 /*
1359 * Determine the size of the memory.
1360 */
1361 switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
1362 case MEM_CTL2_SIZE_4MB: smem_size = 0x00400000; break;
1363 case MEM_CTL2_SIZE_2MB: smem_size = 0x00200000; break;
1364 case MEM_CTL2_SIZE_1MB: smem_size = 0x00100000; break;
1365 default: smem_size = 0x00100000; break;
1366 }
1367
1368 cfb->fb.fix.smem_len = smem_size;
1369 cfb->fb.fix.mmio_len = MMIO_SIZE;
1370 cfb->fb.screen_base = cfb->region;
1371
1372 err = -EINVAL;
1373 if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
1374 &cyber2000fb_default_mode, 8)) {
1375 printk("%s: no valid mode found\n", cfb->fb.fix.id);
1376 goto failed;
1377 }
1378
1379 cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
1380 (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
1381
1382 if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
1383 cfb->fb.var.yres_virtual = cfb->fb.var.yres;
1384
1385// fb_set_var(&cfb->fb.var, -1, &cfb->fb);
1386
1387 /*
1388 * Calculate the hsync and vsync frequencies. Note that
1389 * we split the 1e12 constant up so that we can preserve
1390 * the precision and fit the results into 32-bit registers.
1391 * (1953125000 * 512 = 1e12)
1392 */
1393 h_sync = 1953125000 / cfb->fb.var.pixclock;
1394 h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
1395 cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
1396 v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
1397 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
1398
1399 printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
1400 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
1401 cfb->fb.var.xres, cfb->fb.var.yres,
1402 h_sync / 1000, h_sync % 1000, v_sync);
1403
1404 if (cfb->dev)
1405 cfb->fb.device = &cfb->dev->dev;
1406 err = register_framebuffer(&cfb->fb);
1407
1408failed:
1409 return err;
1410}
1411
1412static void cyberpro_common_resume(struct cfb_info *cfb)
1413{
1414 cyberpro_init_hw(cfb);
1415
1416 /*
1417 * Reprogram the MEM_CTL1 and MEM_CTL2 registers
1418 */
1419 cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
1420 cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
1421
1422 /*
1423 * Restore the old video mode and the palette.
1424 * We also need to tell fbcon to redraw the console.
1425 */
1426 cyber2000fb_set_par(&cfb->fb);
1427}
1428
1429#ifdef CONFIG_ARCH_SHARK
1430
1431#include <asm/arch/hardware.h>
1432
1433static int __devinit
1434cyberpro_vl_probe(void)
1435{
1436 struct cfb_info *cfb;
1437 int err = -ENOMEM;
1438
1439 if (!request_mem_region(FB_START,FB_SIZE,"CyberPro2010")) return err;
1440
1441 cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
1442 if (!cfb)
1443 goto failed_release;
1444
1445 cfb->dev = NULL;
1446 cfb->region = ioremap(FB_START,FB_SIZE);
1447 if (!cfb->region)
1448 goto failed_ioremap;
1449
1450 cfb->regs = cfb->region + MMIO_OFFSET;
1451 cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
1452 cfb->fb.fix.smem_start = FB_START;
1453
1454 /*
1455 * Bring up the hardware. This is expected to enable access
1456 * to the linear memory region, and allow access to the memory
1457 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
1458 * initialised.
1459 */
1460 cyber2000fb_writeb(0x18, 0x46e8, cfb);
1461 cyber2000fb_writeb(0x01, 0x102, cfb);
1462 cyber2000fb_writeb(0x08, 0x46e8, cfb);
1463 cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
1464 cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
1465
1466 cfb->mclk_mult = 0xdb;
1467 cfb->mclk_div = 0x54;
1468
1469 err = cyberpro_common_probe(cfb);
1470 if (err)
1471 goto failed;
1472
1473 if (int_cfb_info == NULL)
1474 int_cfb_info = cfb;
1475
1476 return 0;
1477
1478failed:
1479 iounmap(cfb->region);
1480failed_ioremap:
1481 cyberpro_free_fb_info(cfb);
1482failed_release:
1483 release_mem_region(FB_START,FB_SIZE);
1484
1485 return err;
1486}
1487#endif /* CONFIG_ARCH_SHARK */
1488
1489/*
1490 * PCI specific support.
1491 */
1492#ifdef CONFIG_PCI
1493/*
1494 * We need to wake up the CyberPro, and make sure its in linear memory
1495 * mode. Unfortunately, this is specific to the platform and card that
1496 * we are running on.
1497 *
1498 * On x86 and ARM, should we be initialising the CyberPro first via the
1499 * IO registers, and then the MMIO registers to catch all cases? Can we
1500 * end up in the situation where the chip is in MMIO mode, but not awake
1501 * on an x86 system?
1502 */
1503static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
1504{
1505 unsigned char val;
1506
1507#if defined(__sparc_v9__)
1508#error "You lose, consult DaveM."
1509#elif defined(__sparc__)
1510 /*
1511 * SPARC does not have an "outb" instruction, so we generate
1512 * I/O cycles storing into a reserved memory space at
1513 * physical address 0x3000000
1514 */
1515 unsigned char *iop;
1516
1517 iop = ioremap(0x3000000, 0x5000);
1518 if (iop == NULL) {
1519 prom_printf("iga5000: cannot map I/O\n");
1520 return -ENOMEM;
1521 }
1522
1523 writeb(0x18, iop + 0x46e8);
1524 writeb(0x01, iop + 0x102);
1525 writeb(0x08, iop + 0x46e8);
1526 writeb(EXT_BIU_MISC, iop + 0x3ce);
1527 writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
1528
1529 iounmap((void *)iop);
1530#else
1531 /*
1532 * Most other machine types are "normal", so
1533 * we use the standard IO-based wakeup.
1534 */
1535 outb(0x18, 0x46e8);
1536 outb(0x01, 0x102);
1537 outb(0x08, 0x46e8);
1538 outb(EXT_BIU_MISC, 0x3ce);
1539 outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
1540#endif
1541
1542 /*
1543 * Allow the CyberPro to accept PCI burst accesses
1544 */
1545 val = cyber2000_grphr(EXT_BUS_CTL, cfb);
1546 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
1547 printk(KERN_INFO "%s: enabling PCI bursts\n", cfb->fb.fix.id);
1548
1549 val |= EXT_BUS_CTL_PCIBURST_WRITE;
1550
1551 if (cfb->id == ID_CYBERPRO_5000)
1552 val |= EXT_BUS_CTL_PCIBURST_READ;
1553
1554 cyber2000_grphw(EXT_BUS_CTL, val, cfb);
1555 }
1556
1557 return 0;
1558}
1559
1560static int __devinit
1561cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
1562{
1563 struct cfb_info *cfb;
1564 char name[16];
1565 int err;
1566
1567 sprintf(name, "CyberPro%4X", id->device);
1568
1569 err = pci_enable_device(dev);
1570 if (err)
1571 return err;
1572
1573 err = pci_request_regions(dev, name);
1574 if (err)
1575 return err;
1576
1577 err = -ENOMEM;
1578 cfb = cyberpro_alloc_fb_info(id->driver_data, name);
1579 if (!cfb)
1580 goto failed_release;
1581
1582 cfb->dev = dev;
1583 cfb->region = ioremap(pci_resource_start(dev, 0),
1584 pci_resource_len(dev, 0));
1585 if (!cfb->region)
1586 goto failed_ioremap;
1587
1588 cfb->regs = cfb->region + MMIO_OFFSET;
1589 cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
1590 cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
1591
1592 /*
1593 * Bring up the hardware. This is expected to enable access
1594 * to the linear memory region, and allow access to the memory
1595 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
1596 * initialised.
1597 */
1598 err = cyberpro_pci_enable_mmio(cfb);
1599 if (err)
1600 goto failed;
1601
1602 /*
1603 * Use MCLK from BIOS. FIXME: what about hotplug?
1604 */
1605 cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
1606 cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb);
1607
1608#ifdef __arm__
1609 /*
1610 * MCLK on the NetWinder and the Shark is fixed at 75MHz
1611 */
1612 if (machine_is_netwinder()) {
1613 cfb->mclk_mult = 0xdb;
1614 cfb->mclk_div = 0x54;
1615 }
1616#endif
1617
1618 err = cyberpro_common_probe(cfb);
1619 if (err)
1620 goto failed;
1621
1622 /*
1623 * Our driver data
1624 */
1625 pci_set_drvdata(dev, cfb);
1626 if (int_cfb_info == NULL)
1627 int_cfb_info = cfb;
1628
1629 return 0;
1630
1631failed:
1632 iounmap(cfb->region);
1633failed_ioremap:
1634 cyberpro_free_fb_info(cfb);
1635failed_release:
1636 pci_release_regions(dev);
1637
1638 return err;
1639}
1640
1641static void __devexit cyberpro_pci_remove(struct pci_dev *dev)
1642{
1643 struct cfb_info *cfb = pci_get_drvdata(dev);
1644
1645 if (cfb) {
1646 /*
1647 * If unregister_framebuffer fails, then
1648 * we will be leaving hooks that could cause
1649 * oopsen laying around.
1650 */
1651 if (unregister_framebuffer(&cfb->fb))
1652 printk(KERN_WARNING "%s: danger Will Robinson, "
1653 "danger danger! Oopsen imminent!\n",
1654 cfb->fb.fix.id);
1655 iounmap(cfb->region);
1656 cyberpro_free_fb_info(cfb);
1657
1658 /*
1659 * Ensure that the driver data is no longer
1660 * valid.
1661 */
1662 pci_set_drvdata(dev, NULL);
1663 if (cfb == int_cfb_info)
1664 int_cfb_info = NULL;
1665
1666 pci_release_regions(dev);
1667 }
1668}
1669
1670static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state)
1671{
1672 return 0;
1673}
1674
1675/*
1676 * Re-initialise the CyberPro hardware
1677 */
1678static int cyberpro_pci_resume(struct pci_dev *dev)
1679{
1680 struct cfb_info *cfb = pci_get_drvdata(dev);
1681
1682 if (cfb) {
1683 cyberpro_pci_enable_mmio(cfb);
1684 cyberpro_common_resume(cfb);
1685 }
1686
1687 return 0;
1688}
1689
1690static struct pci_device_id cyberpro_pci_table[] = {
1691// Not yet
1692// { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
1693// PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
1694 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
1695 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
1696 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
1697 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
1698 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
1699 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
1700 { 0, }
1701};
1702
1703MODULE_DEVICE_TABLE(pci,cyberpro_pci_table);
1704
1705static struct pci_driver cyberpro_driver = {
1706 .name = "CyberPro",
1707 .probe = cyberpro_pci_probe,
1708 .remove = __devexit_p(cyberpro_pci_remove),
1709 .suspend = cyberpro_pci_suspend,
1710 .resume = cyberpro_pci_resume,
1711 .id_table = cyberpro_pci_table
1712};
1713#endif
1714
1715/*
1716 * I don't think we can use the "module_init" stuff here because
1717 * the fbcon stuff may not be initialised yet. Hence the #ifdef
1718 * around module_init.
1719 *
1720 * Tony: "module_init" is now required
1721 */
1722static int __init cyber2000fb_init(void)
1723{
1724 int ret = -1, err;
1725
1726#ifndef MODULE
1727 char *option = NULL;
1728
1729 if (fb_get_options("cyber2000fb", &option))
1730 return -ENODEV;
1731 cyber2000fb_setup(option);
1732#endif
1733
1734#ifdef CONFIG_ARCH_SHARK
1735 err = cyberpro_vl_probe();
1736 if (!err) {
1737 ret = 0;
1738 __module_get(THIS_MODULE);
1739 }
1740#endif
1741#ifdef CONFIG_PCI
1742 err = pci_register_driver(&cyberpro_driver);
1743 if (!err)
1744 ret = 0;
1745#endif
1746
1747 return ret ? err : 0;
1748}
1749
1750static void __exit cyberpro_exit(void)
1751{
1752 pci_unregister_driver(&cyberpro_driver);
1753}
1754
1755module_init(cyber2000fb_init);
1756module_exit(cyberpro_exit);
1757
1758MODULE_AUTHOR("Russell King");
1759MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
1760MODULE_LICENSE("GPL");