blob: 549b960667c81b5bcbff1145550a28630038c374 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
Nicolas Ferre0912e532009-06-23 16:30:56 +02008config HAVE_FB_ATMEL
9 bool
10
Dmitry Eremin-Solenikovf00117a2011-01-12 15:19:35 +000011config SH_MIPI_DSI
12 tristate
13 depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
14
15config SH_LCD_MIPI_DSI
16 bool
17
Randy Dunlap179b0252007-10-16 01:29:39 -070018source "drivers/char/agp/Kconfig"
19
Benjamin Herrenschmidtdeb2d2e2009-08-11 15:52:06 +100020source "drivers/gpu/vga/Kconfig"
21
Dave Airliec0e09202008-05-29 10:09:59 +100022source "drivers/gpu/drm/Kconfig"
Antonino A. Daplasba707102006-06-26 00:26:37 -070023
Lee, Chun-Yie26fd112010-10-20 13:51:19 +080024source "drivers/gpu/stub/Kconfig"
25
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -070026config VGASTATE
27 tristate
28 default n
29
Luming Yu23b0f012007-05-09 21:07:05 +080030config VIDEO_OUTPUT_CONTROL
31 tristate "Lowlevel video output switch controls"
Luming Yu23b0f012007-05-09 21:07:05 +080032 help
33 This framework adds support for low-level control of the video
34 output switch.
35
Randy Dunlap179b0252007-10-16 01:29:39 -070036menuconfig FB
Linus Torvalds1da177e2005-04-16 15:20:36 -070037 tristate "Support for frame buffer devices"
38 ---help---
39 The frame buffer device provides an abstraction for the graphics
40 hardware. It represents the frame buffer of some video hardware and
41 allows application software to access the graphics hardware through
42 a well-defined interface, so the software doesn't need to know
43 anything about the low-level (hardware register) stuff.
44
45 Frame buffer devices work identically across the different
46 architectures supported by Linux and make the implementation of
47 application programs easier and more portable; at this point, an X
48 server exists which uses the frame buffer device exclusively.
49 On several non-X86 architectures, the frame buffer device is the
50 only way to use the graphics hardware.
51
52 The device is accessed through special device nodes, usually located
53 in the /dev directory, i.e. /dev/fb*.
54
55 You need an utility program called fbset to make full use of frame
56 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
57 and the Framebuffer-HOWTO at
Justin P. Mattock631dd1a2010-10-18 11:03:14 +020058 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
Linus Torvalds1da177e2005-04-16 15:20:36 -070059 information.
60
61 Say Y here and to the driver for your graphics board below if you
62 are compiling a kernel for a non-x86 architecture.
63
64 If you are compiling for the x86 architecture, you can say Y if you
65 want to play with it, but it is not essential. Please note that
66 running graphical applications that directly touch the hardware
67 (e.g. an accelerated X server) and that are not frame buffer
68 device-aware may cause unexpected results. If unsure, say N.
69
James Simmonse0e34ef2007-02-10 14:15:43 +000070config FIRMWARE_EDID
71 bool "Enable firmware EDID"
72 depends on FB
73 default n
74 ---help---
75 This enables access to the EDID transferred from the firmware.
76 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
77 transfers do not work for your driver and if you are using
78 nvidiafb, i810fb or savagefb.
79
80 In general, choosing Y for this option is safe. If you
81 experience extremely long delays while booting before you get
82 something on your display, try setting this to N. Matrox cards in
83 combination with certain motherboards and monitors are known to
84 suffer from this problem.
85
Dennis Munsiefc5891c2006-10-03 01:14:42 -070086config FB_DDC
87 tristate
James Simmonse0e34ef2007-02-10 14:15:43 +000088 depends on FB
89 select I2C_ALGOBIT
90 select I2C
Dennis Munsiefc5891c2006-10-03 01:14:42 -070091 default n
92
Michal Januszewski4d31a2b2008-10-15 22:03:51 -070093config FB_BOOT_VESA_SUPPORT
94 bool
95 depends on FB
96 default n
97 ---help---
98 If true, at least one selected framebuffer driver can take advantage
99 of VESA video modes set at an early boot stage via the vga= parameter.
100
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101config FB_CFB_FILLRECT
102 tristate
103 depends on FB
104 default n
105 ---help---
106 Include the cfb_fillrect function for generic software rectangle
107 filling. This is used by drivers that don't provide their own
108 (accelerated) version.
109
110config FB_CFB_COPYAREA
111 tristate
112 depends on FB
113 default n
114 ---help---
115 Include the cfb_copyarea function for generic software area copying.
116 This is used by drivers that don't provide their own (accelerated)
117 version.
118
119config FB_CFB_IMAGEBLIT
120 tristate
121 depends on FB
122 default n
123 ---help---
124 Include the cfb_imageblit function for generic software image
125 blitting. This is used by drivers that don't provide their own
126 (accelerated) version.
127
Pavel Pisa779121e2007-10-16 01:29:21 -0700128config FB_CFB_REV_PIXELS_IN_BYTE
129 bool
130 depends on FB
131 default n
132 ---help---
133 Allow generic frame-buffer functions to work on displays with 1, 2
134 and 4 bits per pixel depths which has opposite order of pixels in
135 byte order to bytes in long order.
136
Antonino A. Daplas68648ed2007-05-08 00:38:57 -0700137config FB_SYS_FILLRECT
138 tristate
139 depends on FB
140 default n
141 ---help---
142 Include the sys_fillrect function for generic software rectangle
143 filling. This is used by drivers that don't provide their own
144 (accelerated) version and the framebuffer is in system RAM.
145
146config FB_SYS_COPYAREA
147 tristate
148 depends on FB
149 default n
150 ---help---
151 Include the sys_copyarea function for generic software area copying.
152 This is used by drivers that don't provide their own (accelerated)
153 version and the framebuffer is in system RAM.
154
155config FB_SYS_IMAGEBLIT
156 tristate
157 depends on FB
158 default n
159 ---help---
160 Include the sys_imageblit function for generic software image
161 blitting. This is used by drivers that don't provide their own
162 (accelerated) version and the framebuffer is in system RAM.
163
Anton Vorontsove4c690e2008-04-28 02:14:49 -0700164menuconfig FB_FOREIGN_ENDIAN
165 bool "Framebuffer foreign endianness support"
166 depends on FB
167 ---help---
168 This menu will let you enable support for the framebuffers with
169 non-native endianness (e.g. Little-Endian framebuffer on a
170 Big-Endian machine). Most probably you don't have such hardware,
171 so it's safe to say "n" here.
172
173choice
174 prompt "Choice endianness support"
175 depends on FB_FOREIGN_ENDIAN
176
177config FB_BOTH_ENDIAN
178 bool "Support for Big- and Little-Endian framebuffers"
179
180config FB_BIG_ENDIAN
181 bool "Support for Big-Endian framebuffers only"
182
183config FB_LITTLE_ENDIAN
184 bool "Support for Little-Endian framebuffers only"
185
186endchoice
187
Antonino A. Daplas09aaf262007-05-08 00:39:03 -0700188config FB_SYS_FOPS
189 tristate
190 depends on FB
191 default n
192
Alexey Charkovd6ff7d02010-11-09 02:42:39 +0300193config FB_WMT_GE_ROPS
194 tristate
195 depends on FB
196 default n
197 ---help---
198 Include functions for accelerated rectangle filling and area
199 copying using WonderMedia Graphics Engine operations.
200
Jaya Kumar60b59be2007-05-08 00:37:37 -0700201config FB_DEFERRED_IO
202 bool
203 depends on FB
Jaya Kumar60b59be2007-05-08 00:37:37 -0700204
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700205config FB_HECUBA
206 tristate
207 depends on FB
208 depends on FB_DEFERRED_IO
209
Ondrej Zajiceka2684222007-02-12 00:54:49 -0800210config FB_SVGALIB
211 tristate
212 depends on FB
213 default n
214 ---help---
215 Common utility functions useful to fbdev drivers of VGA-based
216 cards.
217
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218config FB_MACMODES
219 tristate
220 depends on FB
221 default n
222
Michael Hanselmann5474c122006-06-25 05:47:08 -0700223config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -0700224 bool
225 depends on FB
226 select BACKLIGHT_LCD_SUPPORT
227 select BACKLIGHT_CLASS_DEVICE
228 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -0700229
Linus Torvalds1da177e2005-04-16 15:20:36 -0700230config FB_MODE_HELPERS
231 bool "Enable Video Mode Handling Helpers"
232 depends on FB
233 default n
234 ---help---
235 This enables functions for handling video modes using the
236 Generalized Timing Formula and the EDID parser. A few drivers rely
237 on this feature such as the radeonfb, rivafb, and the i810fb. If
238 your driver does not take advantage of this feature, choosing Y will
239 just increase the kernel size by about 5K.
240
241config FB_TILEBLITTING
242 bool "Enable Tile Blitting Support"
243 depends on FB
244 default n
245 ---help---
246 This enables tile blitting. Tile blitting is a drawing technique
247 where the screen is divided into rectangular sections (tiles), whereas
248 the standard blitting divides the screen into pixels. Because the
249 default drawing element is a tile, drawing functions will be passed
250 parameters in terms of number of tiles instead of number of pixels.
251 For example, to draw a single character, instead of using bitmaps,
252 an index to an array of bitmaps will be used. To clear or move a
253 rectangular section of a screen, the rectangle will be described in
254 terms of number of tiles in the x- and y-axis.
255
256 This is particularly important to one driver, matroxfb. If
257 unsure, say N.
258
Miguel Ojeda10ccaf42007-04-23 14:41:09 -0700259comment "Frame buffer hardware drivers"
James Simmonse0e34ef2007-02-10 14:15:43 +0000260 depends on FB
261
Linus Torvalds1da177e2005-04-16 15:20:36 -0700262config FB_CIRRUS
263 tristate "Cirrus Logic support"
264 depends on FB && (ZORRO || PCI)
265 select FB_CFB_FILLRECT
266 select FB_CFB_COPYAREA
267 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700268 ---help---
269 This enables support for Cirrus Logic GD542x/543x based boards on
270 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
271
272 If you have a PCI-based system, this enables support for these
273 chips: GD-543x, GD-544x, GD-5480.
274
275 Please read the file <file:Documentation/fb/cirrusfb.txt>.
276
277 Say N unless you have such a graphics board or plan to get one
278 before you next recompile the kernel.
279
280config FB_PM2
281 tristate "Permedia2 support"
282 depends on FB && ((AMIGA && BROKEN) || PCI)
283 select FB_CFB_FILLRECT
284 select FB_CFB_COPYAREA
285 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700287 This is the frame buffer device driver for cards based on
288 the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
289 The driver was tested on the following cards:
290 Diamond FireGL 1000 PRO AGP
291 ELSA Gloria Synergy PCI
292 Appian Jeronimo PRO (both heads) PCI
293 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
294 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
295 ASK Graphic Blaster Exxtreme AGP
296
297 To compile this driver as a module, choose M here: the
298 module will be called pm2fb.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299
300config FB_PM2_FIFO_DISCONNECT
301 bool "enable FIFO disconnect feature"
302 depends on FB_PM2 && PCI
303 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700304 Support the Permedia2 FIFO disconnect feature.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700305
306config FB_ARMCLCD
307 tristate "ARM PrimeCell PL110 support"
308 depends on FB && ARM && ARM_AMBA
309 select FB_CFB_FILLRECT
310 select FB_CFB_COPYAREA
311 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700312 help
313 This framebuffer device driver is for the ARM PrimeCell PL110
314 Colour LCD controller. ARM PrimeCells provide the building
315 blocks for System on a Chip devices.
316
317 If you want to compile this as a module (=code which can be
318 inserted into and removed from the running kernel), say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500319 here and read <file:Documentation/kbuild/modules.txt>. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700320 will be called amba-clcd.
321
322config FB_ACORN
323 bool "Acorn VIDC support"
Russell King635f0252008-10-28 09:43:54 +0000324 depends on (FB = y) && ARM && ARCH_ACORN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325 select FB_CFB_FILLRECT
326 select FB_CFB_COPYAREA
327 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700328 help
329 This is the frame buffer device driver for the Acorn VIDC graphics
330 hardware found in Acorn RISC PCs and other ARM-based machines. If
331 unsure, say N.
332
333config FB_CLPS711X
334 bool "CLPS711X LCD support"
335 depends on (FB = y) && ARM && ARCH_CLPS711X
336 select FB_CFB_FILLRECT
337 select FB_CFB_COPYAREA
338 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800339 help
340 Say Y to enable the Framebuffer driver for the CLPS7111 and
341 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700342
343config FB_SA1100
344 bool "SA-1100 LCD support"
345 depends on (FB = y) && ARM && ARCH_SA1100
346 select FB_CFB_FILLRECT
347 select FB_CFB_COPYAREA
348 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349 help
350 This is a framebuffer device for the SA-1100 LCD Controller.
351 See <http://www.linux-fbdev.org/> for information on framebuffer
352 devices.
353
354 If you plan to use the LCD display with your SA-1100 system, say
355 Y here.
356
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700357config FB_IMX
Fabio Estevame3d5fb72011-01-10 09:47:41 -0200358 tristate "Freescale i.MX LCD support"
Sascha Hauerf142b612011-03-03 15:12:44 +0100359 depends on FB && IMX_HAVE_PLATFORM_IMX_FB
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700360 select FB_CFB_FILLRECT
361 select FB_CFB_COPYAREA
362 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700363
Linus Torvalds1da177e2005-04-16 15:20:36 -0700364config FB_CYBER2000
365 tristate "CyberPro 2000/2010/5000 support"
366 depends on FB && PCI && (BROKEN || !SPARC64)
367 select FB_CFB_FILLRECT
368 select FB_CFB_COPYAREA
369 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700370 help
371 This enables support for the Integraphics CyberPro 20x0 and 5000
372 VGA chips used in the Rebel.com Netwinder and other machines.
373 Say Y if you have a NetWinder or a graphics card containing this
374 device, otherwise say N.
375
Ondrej Zarye5dedf82010-08-11 21:48:03 +0200376config FB_CYBER2000_DDC
377 bool "DDC for CyberPro support"
378 depends on FB_CYBER2000
379 select FB_DDC
380 default y
381 help
382 Say Y here if you want DDC support for your CyberPro graphics
383 card. This is only I2C bus support, driver does not use EDID.
384
Russell Kingb7ca01a2010-08-02 09:57:07 +0100385config FB_CYBER2000_I2C
386 bool "CyberPro 2000/2010/5000 I2C support"
387 depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
388 select I2C_ALGOBIT
389 help
390 Enable support for the I2C video decoder interface on the
391 Integraphics CyberPro 20x0 and 5000 VGA chips. This is used
392 on the Netwinder machines for the SAA7111 video capture.
393
Linus Torvalds1da177e2005-04-16 15:20:36 -0700394config FB_APOLLO
395 bool
396 depends on (FB = y) && APOLLO
397 default y
398 select FB_CFB_FILLRECT
399 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700400
401config FB_Q40
402 bool
403 depends on (FB = y) && Q40
404 default y
405 select FB_CFB_FILLRECT
406 select FB_CFB_COPYAREA
407 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408
409config FB_AMIGA
410 tristate "Amiga native chipset support"
411 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412 help
413 This is the frame buffer device driver for the builtin graphics
414 chipset found in Amigas.
415
416 To compile this driver as a module, choose M here: the
417 module will be called amifb.
418
419config FB_AMIGA_OCS
420 bool "Amiga OCS chipset support"
421 depends on FB_AMIGA
422 help
423 This enables support for the original Agnus and Denise video chips,
424 found in the Amiga 1000 and most A500's and A2000's. If you intend
425 to run Linux on any of these systems, say Y; otherwise say N.
426
427config FB_AMIGA_ECS
428 bool "Amiga ECS chipset support"
429 depends on FB_AMIGA
430 help
431 This enables support for the Enhanced Chip Set, found in later
432 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
433 you intend to run Linux on any of these systems, say Y; otherwise
434 say N.
435
436config FB_AMIGA_AGA
437 bool "Amiga AGA chipset support"
438 depends on FB_AMIGA
439 help
440 This enables support for the Advanced Graphics Architecture (also
441 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
442 and CD32. If you intend to run Linux on any of these systems, say Y;
443 otherwise say N.
444
Linus Torvalds1da177e2005-04-16 15:20:36 -0700445config FB_FM2
446 bool "Amiga FrameMaster II/Rainbow II support"
447 depends on (FB = y) && ZORRO
448 select FB_CFB_FILLRECT
449 select FB_CFB_COPYAREA
450 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451 help
452 This is the frame buffer device driver for the Amiga FrameMaster
453 card from BSC (exhibited 1992 but not shipped as a CBM product).
454
Jaya Kumar1154ea72005-06-21 17:17:04 -0700455config FB_ARC
456 tristate "Arc Monochrome LCD board support"
457 depends on FB && X86
Antonino A. Daplas922e6f92007-05-08 00:38:58 -0700458 select FB_SYS_FILLRECT
459 select FB_SYS_COPYAREA
460 select FB_SYS_IMAGEBLIT
Antonino A. Daplasd9a05f12007-05-08 00:39:04 -0700461 select FB_SYS_FOPS
Jaya Kumar1154ea72005-06-21 17:17:04 -0700462 help
463 This enables support for the Arc Monochrome LCD board. The board
464 is based on the KS-108 lcd controller and is typically a matrix
465 of 2*n chips. This driver was tested with a 128x64 panel. This
466 driver supports it for use with x86 SBCs through a 16 bit GPIO
Matt LaPlante09509602006-10-03 22:31:37 +0200467 interface (8 bit data, 8 bit control). If you anticipate using
Jaya Kumar1154ea72005-06-21 17:17:04 -0700468 this driver, say Y or M; otherwise say N. You must specify the
469 GPIO IO address to be used for setting control and data.
470
Linus Torvalds1da177e2005-04-16 15:20:36 -0700471config FB_ATARI
472 bool "Atari native chipset support"
Michael Schmitza1005012007-05-01 22:32:39 +0200473 depends on (FB = y) && ATARI
474 select FB_CFB_FILLRECT
475 select FB_CFB_COPYAREA
476 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477 help
478 This is the frame buffer device driver for the builtin graphics
479 chipset found in Ataris.
480
481config FB_OF
482 bool "Open Firmware frame buffer device support"
Stephen Rothwellbed59272007-03-04 17:04:44 +1100483 depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700484 select FB_CFB_FILLRECT
485 select FB_CFB_COPYAREA
486 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487 select FB_MACMODES
488 help
489 Say Y if you want support with Open Firmware for your graphics
490 board.
491
492config FB_CONTROL
493 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700494 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495 select FB_CFB_FILLRECT
496 select FB_CFB_COPYAREA
497 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700498 select FB_MACMODES
499 help
500 This driver supports a frame buffer for the graphics adapter in the
501 Power Macintosh 7300 and others.
502
503config FB_PLATINUM
504 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700505 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700506 select FB_CFB_FILLRECT
507 select FB_CFB_COPYAREA
508 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700509 select FB_MACMODES
510 help
511 This driver supports a frame buffer for the "platinum" graphics
512 adapter in some Power Macintoshes.
513
514config FB_VALKYRIE
515 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700516 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700517 select FB_CFB_FILLRECT
518 select FB_CFB_COPYAREA
519 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700520 select FB_MACMODES
521 help
522 This driver supports a frame buffer for the "valkyrie" graphics
523 adapter in some Power Macintoshes.
524
525config FB_CT65550
526 bool "Chips 65550 display support"
Randy Dunlap0f8c02342007-11-14 16:58:45 -0800527 depends on (FB = y) && PPC32 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700528 select FB_CFB_FILLRECT
529 select FB_CFB_COPYAREA
530 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700531 help
532 This is the frame buffer device driver for the Chips & Technologies
533 65550 graphics chip in PowerBooks.
534
535config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800536 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 depends on (FB = y) && PCI
538 select FB_CFB_FILLRECT
539 select FB_CFB_COPYAREA
540 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700541 help
542 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543
544config FB_IMSTT
545 bool "IMS Twin Turbo display support"
546 depends on (FB = y) && PCI
547 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548 select FB_MACMODES if PPC
549 help
550 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
551 many Macintosh and compatible computers.
552
Linus Torvalds1da177e2005-04-16 15:20:36 -0700553config FB_VGA16
554 tristate "VGA 16-color graphics support"
555 depends on FB && (X86 || PPC)
556 select FB_CFB_FILLRECT
557 select FB_CFB_COPYAREA
558 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700559 select VGASTATE
Antonino A. Daplasd60d2d82007-05-08 00:39:12 -0700560 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700561 help
562 This is the frame buffer device driver for VGA 16 color graphic
563 cards. Say Y if you have such a card.
564
565 To compile this driver as a module, choose M here: the
566 module will be called vga16fb.
567
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700568config FB_BF54X_LQ043
569 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
Mike Frysingere7a05aa2008-04-28 02:15:47 -0700570 depends on FB && (BF54x) && !BF542
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700571 select FB_CFB_FILLRECT
572 select FB_CFB_COPYAREA
573 select FB_CFB_IMAGEBLIT
574 help
575 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
576
Michael Hennerich99eeed47a2008-03-10 11:44:04 -0700577config FB_BFIN_T350MCQB
578 tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
579 depends on FB && BLACKFIN
580 select BFIN_GPTIMERS
581 select FB_CFB_FILLRECT
582 select FB_CFB_COPYAREA
583 select FB_CFB_IMAGEBLIT
584 help
585 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
586 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
587 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
588
Michael Hennerich9cfe4a92009-12-15 16:46:21 -0800589config FB_BFIN_LQ035Q1
590 tristate "SHARP LQ035Q1DH02 TFT LCD"
591 depends on FB && BLACKFIN && SPI
592 select FB_CFB_FILLRECT
593 select FB_CFB_COPYAREA
594 select FB_CFB_IMAGEBLIT
595 select BFIN_GPTIMERS
596 help
597 This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
598 the Blackfin Landscape LCD EZ-Extender Card.
599 This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
600 It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
601
602 To compile this driver as a module, choose M here: the
603 module will be called bfin-lq035q1-fb.
Michael Hennerich99eeed47a2008-03-10 11:44:04 -0700604
Michael Hennerichdbcc4652010-11-24 09:33:58 +0000605config FB_BF537_LQ035
606 tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
607 depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
608 select FB_CFB_FILLRECT
609 select FB_CFB_COPYAREA
610 select FB_CFB_IMAGEBLIT
611 select BFIN_GPTIMERS
612 help
613 This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
614 attached to a BF537.
615
616 To compile this driver as a module, choose M here: the
617 module will be called bf537-lq035.
618
Michael Hennerichcffd9342010-11-24 09:33:59 +0000619config FB_BFIN_7393
620 tristate "Blackfin ADV7393 Video encoder"
621 depends on FB && BLACKFIN
622 select I2C
623 select FB_CFB_FILLRECT
624 select FB_CFB_COPYAREA
625 select FB_CFB_IMAGEBLIT
626 help
627 This is the framebuffer device for a ADV7393 video encoder
628 attached to a Blackfin on the PPI port.
629 If your Blackfin board has a ADV7393 select Y.
630
631 To compile this driver as a module, choose M here: the
632 module will be called bfin_adv7393fb.
633
634choice
635 prompt "Video mode support"
636 depends on FB_BFIN_7393
637 default NTSC
638
639config NTSC
640 bool 'NTSC 720x480'
641
642config PAL
643 bool 'PAL 720x576'
644
645config NTSC_640x480
646 bool 'NTSC 640x480 (Experimental)'
647
648config PAL_640x480
649 bool 'PAL 640x480 (Experimental)'
650
651config NTSC_YCBCR
652 bool 'NTSC 720x480 YCbCR input'
653
654config PAL_YCBCR
655 bool 'PAL 720x576 YCbCR input'
656
657endchoice
658
659choice
660 prompt "Size of ADV7393 frame buffer memory Single/Double Size"
661 depends on (FB_BFIN_7393)
662 default ADV7393_1XMEM
663
664config ADV7393_1XMEM
665 bool 'Single'
666
667config ADV7393_2XMEM
668 bool 'Double'
669endchoice
670
Linus Torvalds1da177e2005-04-16 15:20:36 -0700671config FB_STI
672 tristate "HP STI frame buffer device support"
673 depends on FB && PARISC
674 select FB_CFB_FILLRECT
675 select FB_CFB_COPYAREA
676 select FB_CFB_IMAGEBLIT
Alexander Beregalov17085a92009-04-03 13:33:32 +0000677 select STI_CONSOLE
678 select VT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700679 default y
680 ---help---
681 STI refers to the HP "Standard Text Interface" which is a set of
682 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
683 Enabling this option will implement the linux framebuffer device
684 using calls to the STI BIOS routines for initialisation.
685
686 If you enable this option, you will get a planar framebuffer device
687 /dev/fb which will work on the most common HP graphic cards of the
688 NGLE family, including the artist chips (in the 7xx and Bxxx series),
689 HCRX, HCRX24, CRX, CRX24 and VisEG series.
690
691 It is safe to enable this option, so you should probably say "Y".
692
693config FB_MAC
694 bool "Generic Macintosh display support"
695 depends on (FB = y) && MAC
696 select FB_CFB_FILLRECT
697 select FB_CFB_COPYAREA
698 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700699 select FB_MACMODES
700
Linus Torvalds1da177e2005-04-16 15:20:36 -0700701config FB_HP300
702 bool
Geert Uytterhoevenad7e4842008-05-18 20:47:09 +0200703 depends on (FB = y) && DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700704 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700705 default y
706
707config FB_TGA
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700708 tristate "TGA/SFB+ framebuffer support"
709 depends on FB && (ALPHA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710 select FB_CFB_FILLRECT
711 select FB_CFB_COPYAREA
712 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800713 select BITREVERSE
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700714 ---help---
715 This is the frame buffer device driver for generic TGA and SFB+
716 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
717 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
718 TURBOchannel cards, also known as PMAGD-A, -B and -C.
719
720 Due to hardware limitations ZLX-E2 and E3 cards are not supported
721 for DECstation 5000/200 systems. Additionally due to firmware
722 limitations these cards may cause troubles with booting DECstation
723 5000/240 and /260 systems, but are fully supported under Linux if
724 you manage to get it going. ;-)
725
726 Say Y if you have one of those.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700727
Michal Januszewski8bdb3a22007-10-16 01:28:26 -0700728config FB_UVESA
729 tristate "Userspace VESA VGA graphics support"
730 depends on FB && CONNECTOR
731 select FB_CFB_FILLRECT
732 select FB_CFB_COPYAREA
733 select FB_CFB_IMAGEBLIT
734 select FB_MODE_HELPERS
735 help
736 This is the frame buffer driver for generic VBE 2.0 compliant
737 graphic cards. It can also take advantage of VBE 3.0 features,
738 such as refresh rate adjustment.
739
740 This driver generally provides more features than vesafb but
741 requires a userspace helper application called 'v86d'. See
742 <file:Documentation/fb/uvesafb.txt> for more information.
743
744 If unsure, say N.
745
Linus Torvalds1da177e2005-04-16 15:20:36 -0700746config FB_VESA
747 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800748 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749 select FB_CFB_FILLRECT
750 select FB_CFB_COPYAREA
751 select FB_CFB_IMAGEBLIT
Michal Januszewski4d31a2b2008-10-15 22:03:51 -0700752 select FB_BOOT_VESA_SUPPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700753 help
754 This is the frame buffer device driver for generic VESA 2.0
755 compliant graphic cards. The older VESA 1.2 cards are not supported.
756 You will get a boot time penguin logo at no additional cost. Please
757 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
758
Huang, Ying7c831722007-11-28 16:21:55 -0800759config FB_EFI
760 bool "EFI-based Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700761 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700762 select FB_CFB_FILLRECT
763 select FB_CFB_COPYAREA
764 select FB_CFB_IMAGEBLIT
765 help
Peter Jones7c08c9a2008-10-15 22:03:43 -0700766 This is the EFI frame buffer device driver. If the firmware on
767 your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
768 using the EFI framebuffer as your console.
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700769
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700770config FB_N411
771 tristate "N411 Apollo/Hecuba devkit support"
Jaya Kumaraad09e52007-05-08 00:37:43 -0700772 depends on FB && X86 && MMU
Antonino A. Daplasd6774932007-05-08 00:39:00 -0700773 select FB_SYS_FILLRECT
774 select FB_SYS_COPYAREA
775 select FB_SYS_IMAGEBLIT
Antonino A. Daplas28d45642007-05-08 00:39:06 -0700776 select FB_SYS_FOPS
Jaya Kumaraad09e52007-05-08 00:37:43 -0700777 select FB_DEFERRED_IO
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700778 select FB_HECUBA
Jaya Kumaraad09e52007-05-08 00:37:43 -0700779 help
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700780 This enables support for the Apollo display controller in its
781 Hecuba form using the n411 devkit.
Jaya Kumaraad09e52007-05-08 00:37:43 -0700782
Linus Torvalds1da177e2005-04-16 15:20:36 -0700783config FB_HGA
784 tristate "Hercules mono graphics support"
785 depends on FB && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700786 help
787 Say Y here if you have a Hercules mono graphics card.
788
789 To compile this driver as a module, choose M here: the
790 module will be called hgafb.
791
Brent Cook529ed802010-12-31 05:56:50 +0000792 As this card technology is at least 25 years old,
793 most people will answer N here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794
Linus Torvalds1da177e2005-04-16 15:20:36 -0700795config FB_SGIVW
796 tristate "SGI Visual Workstation framebuffer support"
797 depends on FB && X86_VISWS
798 select FB_CFB_FILLRECT
799 select FB_CFB_COPYAREA
800 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700801 help
802 SGI Visual Workstation support for framebuffer graphics.
803
804config FB_GBE
805 bool "SGI Graphics Backend frame buffer support"
806 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
807 select FB_CFB_FILLRECT
808 select FB_CFB_COPYAREA
809 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700810 help
811 This is the frame buffer device driver for SGI Graphics Backend.
812 This chip is used in SGI O2 and Visual Workstation 320/540.
813
814config FB_GBE_MEM
815 int "Video memory size in MB"
816 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800817 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700818 help
819 This is the amount of memory reserved for the framebuffer,
820 which can be any value between 1MB and 8MB.
821
Mark Fortescue1a571982005-11-29 19:34:44 -0800822config FB_SBUS
823 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800824 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800825 help
826 Say Y if you want support for SBUS or UPA based frame buffer device.
827
Linus Torvalds1da177e2005-04-16 15:20:36 -0700828config FB_BW2
829 bool "BWtwo support"
Adrian Bunke0196302007-02-12 00:54:50 -0800830 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700831 select FB_CFB_FILLRECT
832 select FB_CFB_COPYAREA
833 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700834 help
835 This is the frame buffer device driver for the BWtwo frame buffer.
836
837config FB_CG3
838 bool "CGthree support"
Adrian Bunke0196302007-02-12 00:54:50 -0800839 depends on (FB = y) && (SPARC && FB_SBUS)
Mark Fortescue1a571982005-11-29 19:34:44 -0800840 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700841 select FB_CFB_COPYAREA
842 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700843 help
844 This is the frame buffer device driver for the CGthree frame buffer.
845
846config FB_CG6
847 bool "CGsix (GX,TurboGX) support"
Adrian Bunke0196302007-02-12 00:54:50 -0800848 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700849 select FB_CFB_COPYAREA
850 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700851 help
852 This is the frame buffer device driver for the CGsix (GX, TurboGX)
853 frame buffer.
854
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700855config FB_FFB
856 bool "Creator/Creator3D/Elite3D support"
857 depends on FB_SBUS && SPARC64
858 select FB_CFB_COPYAREA
859 select FB_CFB_IMAGEBLIT
860 help
861 This is the frame buffer device driver for the Creator, Creator3D,
862 and Elite3D graphics boards.
863
864config FB_TCX
865 bool "TCX (SS4/SS5 only) support"
866 depends on FB_SBUS
867 select FB_CFB_FILLRECT
868 select FB_CFB_COPYAREA
869 select FB_CFB_IMAGEBLIT
870 help
871 This is the frame buffer device driver for the TCX 24/8bit frame
872 buffer.
873
874config FB_CG14
875 bool "CGfourteen (SX) support"
876 depends on FB_SBUS
877 select FB_CFB_FILLRECT
878 select FB_CFB_COPYAREA
879 select FB_CFB_IMAGEBLIT
880 help
881 This is the frame buffer device driver for the CGfourteen frame
882 buffer on Desktop SPARCsystems with the SX graphics option.
883
884config FB_P9100
885 bool "P9100 (Sparcbook 3 only) support"
886 depends on FB_SBUS
887 select FB_CFB_FILLRECT
888 select FB_CFB_COPYAREA
889 select FB_CFB_IMAGEBLIT
890 help
891 This is the frame buffer device driver for the P9100 card
892 supported on Sparcbook 3 machines.
893
894config FB_LEO
895 bool "Leo (ZX) support"
896 depends on FB_SBUS
897 select FB_CFB_FILLRECT
898 select FB_CFB_COPYAREA
899 select FB_CFB_IMAGEBLIT
900 help
901 This is the frame buffer device driver for the SBUS-based Sun ZX
902 (leo) frame buffer cards.
903
904config FB_IGA
905 bool "IGA 168x display support"
David S. Millere11a6c22007-06-03 17:35:24 -0700906 depends on (FB = y) && SPARC32
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700907 select FB_CFB_FILLRECT
908 select FB_CFB_COPYAREA
909 select FB_CFB_IMAGEBLIT
910 help
911 This is the framebuffer device for the INTERGRAPHICS 1680 and
912 successor frame buffer cards.
913
914config FB_XVR500
915 bool "Sun XVR-500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700916 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700917 select FB_CFB_FILLRECT
918 select FB_CFB_COPYAREA
919 select FB_CFB_IMAGEBLIT
920 help
921 This is the framebuffer device for the Sun XVR-500 and similar
922 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200923 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700924 mostly initialized the card already. It is treated as a
925 completely dumb framebuffer device.
926
927config FB_XVR2500
928 bool "Sun XVR-2500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700929 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700930 select FB_CFB_FILLRECT
931 select FB_CFB_COPYAREA
932 select FB_CFB_IMAGEBLIT
933 help
934 This is the framebuffer device for the Sun XVR-2500 and similar
935 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200936 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700937 mostly initialized the card already. It is treated as a
938 completely dumb framebuffer device.
939
David S. Miller2d378b92010-03-13 16:25:03 -0800940config FB_XVR1000
941 bool "Sun XVR-1000 support"
David S. Millerf04e8792010-03-16 14:40:42 -0700942 depends on (FB = y) && SPARC64
David S. Miller2d378b92010-03-13 16:25:03 -0800943 select FB_CFB_FILLRECT
944 select FB_CFB_COPYAREA
945 select FB_CFB_IMAGEBLIT
946 help
947 This is the framebuffer device for the Sun XVR-1000 and similar
948 graphics cards. The driver only works on sparc64 systems where
949 the system firmware has mostly initialized the card already. It
950 is treated as a completely dumb framebuffer device.
951
Linus Torvalds1da177e2005-04-16 15:20:36 -0700952config FB_PVR2
953 tristate "NEC PowerVR 2 display support"
954 depends on FB && SH_DREAMCAST
955 select FB_CFB_FILLRECT
956 select FB_CFB_COPYAREA
957 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700958 ---help---
959 Say Y here if you have a PowerVR 2 card in your box. If you plan to
960 run linux on your Dreamcast, you will have to say Y here.
961 This driver may or may not work on other PowerVR 2 cards, but is
962 totally untested. Use at your own risk. If unsure, say N.
963
964 To compile this driver as a module, choose M here: the
965 module will be called pvr2fb.
966
967 You can pass several parameters to the driver at boot time or at
968 module load time. The parameters look like "video=pvr2:XXX", where
969 the meaning of XXX can be found at the end of the main source file
970 (<file:drivers/video/pvr2fb.c>). Please see the file
971 <file:Documentation/fb/pvr2fb.txt>.
972
973config FB_EPSON1355
974 bool "Epson 1355 framebuffer support"
Paul Mundt1a3f2882007-07-17 04:05:48 -0700975 depends on (FB = y) && ARCH_CEIVA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700976 select FB_CFB_FILLRECT
977 select FB_CFB_COPYAREA
978 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700979 help
980 Build in support for the SED1355 Epson Research Embedded RAMDAC
981 LCD/CRT Controller (since redesignated as the S1D13505) as a
982 framebuffer. Product specs at
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200983 <http://vdc.epson.com/>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700984
Randy Dunlapecc41d52005-11-07 01:00:29 -0800985config FB_S1D13XXX
986 tristate "Epson S1D13XXX framebuffer support"
987 depends on FB
988 select FB_CFB_FILLRECT
989 select FB_CFB_COPYAREA
990 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800991 help
992 Support for S1D13XXX framebuffer device family (currently only
993 working with S1D13806). Product specs at
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200994 <http://vdc.epson.com/>
Randy Dunlapecc41d52005-11-07 01:00:29 -0800995
Nicolas Ferre14340582007-05-10 22:23:26 -0700996config FB_ATMEL
997 tristate "AT91/AT32 LCD Controller support"
Nicolas Ferre0912e532009-06-23 16:30:56 +0200998 depends on FB && HAVE_FB_ATMEL
Nicolas Ferre14340582007-05-10 22:23:26 -0700999 select FB_CFB_FILLRECT
1000 select FB_CFB_COPYAREA
1001 select FB_CFB_IMAGEBLIT
1002 help
1003 This enables support for the AT91/AT32 LCD Controller.
1004
1005config FB_INTSRAM
1006 bool "Frame Buffer in internal SRAM"
1007 depends on FB_ATMEL && ARCH_AT91SAM9261
1008 help
1009 Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
1010 to let frame buffer in external SDRAM.
1011
Nicolas Ferre250a2692007-07-21 04:37:59 -07001012config FB_ATMEL_STN
1013 bool "Use a STN display with AT91/AT32 LCD Controller"
Nicolas Ferre915190f2009-07-21 11:31:29 +01001014 depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
Nicolas Ferre250a2692007-07-21 04:37:59 -07001015 default n
1016 help
1017 Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
1018 Controller. Say N if you want to connect a TFT.
1019
1020 If unsure, say N.
1021
Linus Torvalds1da177e2005-04-16 15:20:36 -07001022config FB_NVIDIA
1023 tristate "nVidia Framebuffer Support"
1024 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001025 select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001026 select FB_MODE_HELPERS
1027 select FB_CFB_FILLRECT
1028 select FB_CFB_COPYAREA
1029 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -08001030 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001031 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001032 help
1033 This driver supports graphics boards with the nVidia chips, TNT
1034 and newer. For very old chipsets, such as the RIVA128, then use
1035 the rivafb.
1036 Say Y if you have such a graphics board.
1037
1038 To compile this driver as a module, choose M here: the
1039 module will be called nvidiafb.
1040
1041config FB_NVIDIA_I2C
1042 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -08001043 depends on FB_NVIDIA
James Simmons166f60d2007-03-06 01:42:02 -08001044 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001045 help
1046 This enables I2C support for nVidia Chipsets. This is used
1047 only for getting EDID information from the attached display
1048 allowing for robust video mode handling and switching.
1049
1050 Because fbdev-2.6 requires that drivers must be able to
1051 independently validate video mode parameters, you should say Y
1052 here.
1053
Jean Delvare647f2e72007-05-10 22:23:29 -07001054config FB_NVIDIA_DEBUG
1055 bool "Lots of debug output"
1056 depends on FB_NVIDIA
1057 default n
1058 help
1059 Say Y here if you want the nVidia driver to output all sorts
1060 of debugging information to provide to the maintainer when
1061 something goes wrong.
1062
Michael Hanselmann5474c122006-06-25 05:47:08 -07001063config FB_NVIDIA_BACKLIGHT
1064 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001065 depends on FB_NVIDIA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001066 default y
1067 help
1068 Say Y here if you want to control the backlight of your display.
1069
Linus Torvalds1da177e2005-04-16 15:20:36 -07001070config FB_RIVA
1071 tristate "nVidia Riva support"
1072 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001073 select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001074 select FB_MODE_HELPERS
1075 select FB_CFB_FILLRECT
1076 select FB_CFB_COPYAREA
1077 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -08001078 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001079 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001080 help
1081 This driver supports graphics boards with the nVidia Riva/Geforce
1082 chips.
1083 Say Y if you have such a graphics board.
1084
1085 To compile this driver as a module, choose M here: the
1086 module will be called rivafb.
1087
1088config FB_RIVA_I2C
1089 bool "Enable DDC Support"
1090 depends on FB_RIVA
James Simmons166f60d2007-03-06 01:42:02 -08001091 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001092 help
1093 This enables I2C support for nVidia Chipsets. This is used
1094 only for getting EDID information from the attached display
1095 allowing for robust video mode handling and switching.
1096
1097 Because fbdev-2.6 requires that drivers must be able to
1098 independently validate video mode parameters, you should say Y
1099 here.
1100
1101config FB_RIVA_DEBUG
Jean Delvare647f2e72007-05-10 22:23:29 -07001102 bool "Lots of debug output"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001103 depends on FB_RIVA
1104 default n
1105 help
1106 Say Y here if you want the Riva driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001107 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108 something goes wrong.
1109
Michael Hanselmann5474c122006-06-25 05:47:08 -07001110config FB_RIVA_BACKLIGHT
1111 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001112 depends on FB_RIVA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001113 default y
1114 help
1115 Say Y here if you want to control the backlight of your display.
1116
Linus Torvalds1da177e2005-04-16 15:20:36 -07001117config FB_I810
1118 tristate "Intel 810/815 support (EXPERIMENTAL)"
Krzysztof Helta1a5c3b2009-02-18 14:48:38 -08001119 depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001120 select FB_MODE_HELPERS
1121 select FB_CFB_FILLRECT
1122 select FB_CFB_COPYAREA
1123 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001124 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001125 help
1126 This driver supports the on-board graphics built in to the Intel 810
1127 and 815 chipsets. Say Y if you have and plan to use such a board.
1128
1129 To compile this driver as a module, choose M here: the
1130 module will be called i810fb.
1131
1132 For more information, please read
1133 <file:Documentation/fb/intel810.txt>
1134
1135config FB_I810_GTF
1136 bool "use VESA Generalized Timing Formula"
1137 depends on FB_I810
1138 help
1139 If you say Y, then the VESA standard, Generalized Timing Formula
1140 or GTF, will be used to calculate the required video timing values
1141 per video mode. Since the GTF allows nondiscrete timings
1142 (nondiscrete being a range of values as opposed to discrete being a
1143 set of values), you'll be able to use any combination of horizontal
1144 and vertical resolutions, and vertical refresh rates without having
1145 to specify your own timing parameters. This is especially useful
1146 to maximize the performance of an aging display, or if you just
1147 have a display with nonstandard dimensions. A VESA compliant
1148 monitor is recommended, but can still work with non-compliant ones.
1149 If you need or want this, then select this option. The timings may
1150 not be compliant with Intel's recommended values. Use at your own
1151 risk.
1152
1153 If you say N, the driver will revert to discrete video timings
1154 using a set recommended by Intel in their documentation.
1155
1156 If unsure, say N.
1157
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001158config FB_I810_I2C
1159 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -07001160 depends on FB_I810 && FB_I810_GTF
Antonino A. Daplase80987f2006-10-03 01:14:44 -07001161 select FB_DDC
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001162 help
1163
Alan Hourihanedbe7e422007-05-08 00:39:25 -07001164config FB_LE80578
1165 tristate "Intel LE80578 (Vermilion) support"
1166 depends on FB && PCI && X86
1167 select FB_MODE_HELPERS
1168 select FB_CFB_FILLRECT
1169 select FB_CFB_COPYAREA
1170 select FB_CFB_IMAGEBLIT
1171 help
1172 This driver supports the LE80578 (Vermilion Range) chipset
1173
1174config FB_CARILLO_RANCH
1175 tristate "Intel Carillo Ranch support"
1176 depends on FB_LE80578 && FB && PCI && X86
1177 help
1178 This driver supports the LE80578 (Carillo Ranch) board
1179
Linus Torvalds1da177e2005-04-16 15:20:36 -07001180config FB_INTEL
Maik Broemme0e170c72008-04-28 02:15:43 -07001181 tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
David Rientjes6a108a12011-01-20 14:44:16 -08001182 depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EXPERT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001183 select FB_MODE_HELPERS
1184 select FB_CFB_FILLRECT
1185 select FB_CFB_COPYAREA
1186 select FB_CFB_IMAGEBLIT
Krzysztof Helt4b198282009-06-18 16:49:21 -07001187 select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
Jesse Barnesba0ab822009-07-03 11:24:46 -07001188 depends on !DRM_I915
Linus Torvalds1da177e2005-04-16 15:20:36 -07001189 help
1190 This driver supports the on-board graphics built in to the Intel
Maik Broemme0e170c72008-04-28 02:15:43 -07001191 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192 Say Y if you have and plan to use such a board.
1193
Krzysztof Helt4b198282009-06-18 16:49:21 -07001194 To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
1195
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001196 To compile this driver as a module, choose M here: the
Linus Torvalds1da177e2005-04-16 15:20:36 -07001197 module will be called intelfb.
1198
Christian Merkled463d342006-08-22 10:07:01 +10001199 For more information, please read <file:Documentation/fb/intelfb.txt>
1200
Linus Torvalds1da177e2005-04-16 15:20:36 -07001201config FB_INTEL_DEBUG
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001202 bool "Intel driver Debug Messages"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001203 depends on FB_INTEL
1204 ---help---
1205 Say Y here if you want the Intel driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001206 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001207 something goes wrong.
1208
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001209config FB_INTEL_I2C
1210 bool "DDC/I2C for Intel framebuffer support"
1211 depends on FB_INTEL
James Simmons166f60d2007-03-06 01:42:02 -08001212 select FB_DDC
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001213 default y
1214 help
1215 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1216
Linus Torvalds1da177e2005-04-16 15:20:36 -07001217config FB_MATROX
1218 tristate "Matrox acceleration"
1219 depends on FB && PCI
1220 select FB_CFB_FILLRECT
1221 select FB_CFB_COPYAREA
1222 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001223 select FB_TILEBLITTING
1224 select FB_MACMODES if PPC_PMAC
1225 ---help---
1226 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
1227 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
1228 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
1229 Matrox G400, G450 or G550 card in your box.
1230
1231 To compile this driver as a module, choose M here: the
1232 module will be called matroxfb.
1233
1234 You can pass several parameters to the driver at boot time or at
Vicente Jiménez90a48152011-01-08 00:54:26 +00001235 module load time. The parameters look like "video=matroxfb:XXX", and
Linus Torvalds1da177e2005-04-16 15:20:36 -07001236 are described in <file:Documentation/fb/matroxfb.txt>.
1237
1238config FB_MATROX_MILLENIUM
1239 bool "Millennium I/II support"
1240 depends on FB_MATROX
1241 help
1242 Say Y here if you have a Matrox Millennium or Matrox Millennium II
1243 video card. If you select "Advanced lowlevel driver options" below,
1244 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
1245 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
1246 also use font widths different from 8.
1247
1248config FB_MATROX_MYSTIQUE
1249 bool "Mystique support"
1250 depends on FB_MATROX
1251 help
1252 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
1253 video card. If you select "Advanced lowlevel driver options" below,
1254 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
1255 packed pixel and 32 bpp packed pixel. You can also use font widths
1256 different from 8.
1257
1258config FB_MATROX_G
1259 bool "G100/G200/G400/G450/G550 support"
1260 depends on FB_MATROX
1261 ---help---
1262 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1263 video card. If you select "Advanced lowlevel driver options", you
1264 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
1265 pixel and 32 bpp packed pixel. You can also use font widths
1266 different from 8.
1267
Jean Delvareee831262009-05-12 13:19:41 -07001268 If you need support for G400 secondary head, you must say Y to
1269 "Matrox I2C support" and "G400 second head support" right below.
1270 G450/G550 secondary head and digital output are supported without
1271 additional modules.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001272
1273 The driver starts in monitor mode. You must use the matroxset tool
1274 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1275 swap primary and secondary head outputs, or to change output mode.
1276 Secondary head driver always start in 640x480 resolution and you
1277 must use fbset to change it.
1278
1279 Do not forget that second head supports only 16 and 32 bpp
1280 packed pixels, so it is a good idea to compile them into the kernel
1281 too. You can use only some font widths, as the driver uses generic
1282 painting procedures (the secondary head does not use acceleration
1283 engine).
1284
1285 G450/G550 hardware can display TV picture only from secondary CRTC,
1286 and it performs no scaling, so picture must have 525 or 625 lines.
1287
1288config FB_MATROX_I2C
1289 tristate "Matrox I2C support"
James Simmons166f60d2007-03-06 01:42:02 -08001290 depends on FB_MATROX
1291 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001292 ---help---
1293 This drivers creates I2C buses which are needed for accessing the
1294 DDC (I2C) bus present on all Matroxes, an I2C bus which
1295 interconnects Matrox optional devices, like MGA-TVO on G200 and
1296 G400, and the secondary head DDC bus, present on G400 only.
1297
1298 You can say Y or M here if you want to experiment with monitor
1299 detection code. You must say Y or M here if you want to use either
1300 second head of G400 or MGA-TVO on G200 or G400.
1301
1302 If you compile it as module, it will create a module named
1303 i2c-matroxfb.
1304
1305config FB_MATROX_MAVEN
1306 tristate "G400 second head support"
1307 depends on FB_MATROX_G && FB_MATROX_I2C
1308 ---help---
1309 WARNING !!! This support does not work with G450 !!!
1310
1311 Say Y or M here if you want to use a secondary head (meaning two
1312 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1313 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1314 secondary head output is blanked while you are in X. With XFree
1315 3.9.17 preview you can use both heads if you use SVGA over fbdev or
1316 the fbdev driver on first head and the fbdev driver on second head.
1317
1318 If you compile it as module, two modules are created,
1319 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1320 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1321 also load i2c-matroxfb to get it to run.
1322
1323 The driver starts in monitor mode and you must use the matroxset
1324 tool (available at
1325 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1326 PAL or NTSC or to swap primary and secondary head outputs.
1327 Secondary head driver also always start in 640x480 resolution, you
1328 must use fbset to change it.
1329
1330 Also do not forget that second head supports only 16 and 32 bpp
1331 packed pixels, so it is a good idea to compile them into the kernel
1332 too. You can use only some font widths, as the driver uses generic
1333 painting procedures (the secondary head does not use acceleration
1334 engine).
1335
Linus Torvalds1da177e2005-04-16 15:20:36 -07001336config FB_RADEON
1337 tristate "ATI Radeon display support"
1338 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001339 select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001340 select FB_MODE_HELPERS
1341 select FB_CFB_FILLRECT
1342 select FB_CFB_COPYAREA
1343 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001344 select FB_MACMODES if PPC_OF
1345 help
1346 Choose this option if you want to use an ATI Radeon graphics card as
1347 a framebuffer device. There are both PCI and AGP versions. You
1348 don't need to choose this to run the Radeon in plain VGA mode.
1349
Linus Torvalds1da177e2005-04-16 15:20:36 -07001350 There is a product page at
Justin P. Mattock631dd1a2010-10-18 11:03:14 +02001351 http://products.amd.com/en-us/GraphicCardResult.aspx
Michael Hanselmann5474c122006-06-25 05:47:08 -07001352
Linus Torvalds1da177e2005-04-16 15:20:36 -07001353config FB_RADEON_I2C
1354 bool "DDC/I2C for ATI Radeon support"
1355 depends on FB_RADEON
James Simmons166f60d2007-03-06 01:42:02 -08001356 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001357 default y
1358 help
1359 Say Y here if you want DDC/I2C support for your Radeon board.
1360
Michael Hanselmann5474c122006-06-25 05:47:08 -07001361config FB_RADEON_BACKLIGHT
1362 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001363 depends on FB_RADEON
Michael Hanselmann5474c122006-06-25 05:47:08 -07001364 default y
1365 help
1366 Say Y here if you want to control the backlight of your display.
1367
Linus Torvalds1da177e2005-04-16 15:20:36 -07001368config FB_RADEON_DEBUG
1369 bool "Lots of debug output from Radeon driver"
1370 depends on FB_RADEON
1371 default n
1372 help
1373 Say Y here if you want the Radeon driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001374 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001375 something goes wrong.
1376
1377config FB_ATY128
1378 tristate "ATI Rage128 display support"
1379 depends on FB && PCI
1380 select FB_CFB_FILLRECT
1381 select FB_CFB_COPYAREA
1382 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001383 select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001384 select FB_MACMODES if PPC_PMAC
1385 help
1386 This driver supports graphics boards with the ATI Rage128 chips.
1387 Say Y if you have such a graphics board and read
1388 <file:Documentation/fb/aty128fb.txt>.
1389
1390 To compile this driver as a module, choose M here: the
1391 module will be called aty128fb.
1392
Michael Hanselmann5474c122006-06-25 05:47:08 -07001393config FB_ATY128_BACKLIGHT
1394 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001395 depends on FB_ATY128
Michael Hanselmann5474c122006-06-25 05:47:08 -07001396 default y
1397 help
1398 Say Y here if you want to control the backlight of your display.
1399
Linus Torvalds1da177e2005-04-16 15:20:36 -07001400config FB_ATY
1401 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001402 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001403 select FB_CFB_FILLRECT
1404 select FB_CFB_COPYAREA
1405 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001406 select FB_BACKLIGHT if FB_ATY_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001407 select FB_MACMODES if PPC
1408 help
1409 This driver supports graphics boards with the ATI Mach64 chips.
1410 Say Y if you have such a graphics board.
1411
1412 To compile this driver as a module, choose M here: the
1413 module will be called atyfb.
1414
1415config FB_ATY_CT
1416 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1417 depends on PCI && FB_ATY
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -07001418 default y if SPARC64 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001419 help
1420 Say Y here to support use of ATI's 64-bit Rage boards (or other
1421 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1422 framebuffer device. The ATI product support page for these boards
Justin P. Mattock631dd1a2010-10-18 11:03:14 +02001423 is at <http://support.ati.com/products/pc/mach64/mach64.html>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001424
1425config FB_ATY_GENERIC_LCD
1426 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1427 depends on FB_ATY_CT
1428 help
1429 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1430 Rage XC, or Rage XL chipset.
1431
Linus Torvalds1da177e2005-04-16 15:20:36 -07001432config FB_ATY_GX
1433 bool "Mach64 GX support" if PCI
1434 depends on FB_ATY
1435 default y if ATARI
1436 help
1437 Say Y here to support use of the ATI Mach64 Graphics Expression
1438 board (or other boards based on the Mach64 GX chipset) as a
1439 framebuffer device. The ATI product support page for these boards
1440 is at
1441 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1442
Michael Hanselmann5474c122006-06-25 05:47:08 -07001443config FB_ATY_BACKLIGHT
1444 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001445 depends on FB_ATY
Michael Hanselmann5474c122006-06-25 05:47:08 -07001446 default y
1447 help
1448 Say Y here if you want to control the backlight of your display.
1449
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001450config FB_S3
1451 tristate "S3 Trio/Virge support"
1452 depends on FB && PCI
1453 select FB_CFB_FILLRECT
1454 select FB_CFB_COPYAREA
1455 select FB_CFB_IMAGEBLIT
1456 select FB_TILEBLITTING
1457 select FB_SVGALIB
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001458 select VGASTATE
Antonino A. Daplas8db51662007-05-08 00:39:14 -07001459 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001460 ---help---
1461 Driver for graphics boards with S3 Trio / S3 Virge chip.
1462
Ondrej Zary86c0f0432011-04-18 10:14:57 +00001463config FB_S3_DDC
1464 bool "DDC for S3 support"
1465 depends on FB_S3
1466 select FB_DDC
1467 default y
1468 help
1469 Say Y here if you want DDC support for your S3 graphics card.
1470
Linus Torvalds1da177e2005-04-16 15:20:36 -07001471config FB_SAVAGE
1472 tristate "S3 Savage support"
1473 depends on FB && PCI && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001474 select FB_MODE_HELPERS
1475 select FB_CFB_FILLRECT
1476 select FB_CFB_COPYAREA
1477 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001478 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001479 help
1480 This driver supports notebooks and computers with S3 Savage PCI/AGP
1481 chips.
1482
1483 Say Y if you have such a graphics card.
1484
1485 To compile this driver as a module, choose M here; the module
1486 will be called savagefb.
1487
1488config FB_SAVAGE_I2C
1489 bool "Enable DDC2 Support"
1490 depends on FB_SAVAGE
James Simmons166f60d2007-03-06 01:42:02 -08001491 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001492 help
1493 This enables I2C support for S3 Savage Chipsets. This is used
1494 only for getting EDID information from the attached display
1495 allowing for robust video mode handling and switching.
1496
1497 Because fbdev-2.6 requires that drivers must be able to
1498 independently validate video mode parameters, you should say Y
1499 here.
1500
1501config FB_SAVAGE_ACCEL
1502 bool "Enable Console Acceleration"
1503 depends on FB_SAVAGE
1504 default n
1505 help
1506 This option will compile in console acceleration support. If
1507 the resulting framebuffer console has bothersome glitches, then
1508 choose N here.
1509
1510config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001511 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001512 depends on FB && PCI
1513 select FB_CFB_FILLRECT
1514 select FB_CFB_COPYAREA
1515 select FB_CFB_IMAGEBLIT
Krzysztof Helt4b198282009-06-18 16:49:21 -07001516 select FB_BOOT_VESA_SUPPORT if FB_SIS = y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001517 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001518 This is the frame buffer device driver for the SiS 300, 315, 330
1519 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1520 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001521
1522 To compile this driver as a module, choose M here; the module
1523 will be called sisfb.
1524
1525config FB_SIS_300
1526 bool "SiS 300 series support"
1527 depends on FB_SIS
1528 help
1529 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1530
1531config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001532 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001533 depends on FB_SIS
1534 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001535 Say Y here to support use of the SiS 315, 330 and 340 series
1536 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1537 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001538
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001539config FB_VIA
1540 tristate "VIA UniChrome (Pro) and Chrome9 display support"
Ben Hutchings901b97d2010-07-20 00:40:16 +01001541 depends on FB && PCI && X86
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001542 select FB_CFB_FILLRECT
1543 select FB_CFB_COPYAREA
1544 select FB_CFB_IMAGEBLIT
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001545 select I2C_ALGOBIT
1546 select I2C
Jonathan Corbet7e0de022009-12-01 20:39:57 -07001547 select GPIOLIB
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001548 help
1549 This is the frame buffer device driver for Graphics chips of VIA
1550 UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
1551 CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
1552 /P4M900,VX800)
1553 Say Y if you have a VIA UniChrome graphics board.
1554
1555 To compile this driver as a module, choose M here: the
1556 module will be called viafb.
Jonathan Corbet7e0de022009-12-01 20:39:57 -07001557
Florian Tobias Schandinat2b78a962010-04-17 19:44:57 +00001558if FB_VIA
1559
1560config FB_VIA_DIRECT_PROCFS
1561 bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
1562 depends on FB_VIA
1563 default n
1564 help
1565 Allow direct hardware access to some output registers via procfs.
1566 This is dangerous but may provide the only chance to get the
1567 correct output device configuration.
1568 Its use is strongly discouraged.
1569
Florian Tobias Schandinat29462942011-04-23 23:52:45 +00001570config FB_VIA_X_COMPATIBILITY
1571 bool "X server compatibility"
1572 depends on FB_VIA
1573 default n
1574 help
1575 This option reduces the functionality (power saving, ...) of the
1576 framebuffer to avoid negative impact on the OpenChrome X server.
1577 If you use any X server other than fbdev you should enable this
1578 otherwise it should be safe to disable it and allow using all
1579 features.
1580
Florian Tobias Schandinat2b78a962010-04-17 19:44:57 +00001581endif
1582
Linus Torvalds1da177e2005-04-16 15:20:36 -07001583config FB_NEOMAGIC
1584 tristate "NeoMagic display support"
1585 depends on FB && PCI
1586 select FB_MODE_HELPERS
1587 select FB_CFB_FILLRECT
1588 select FB_CFB_COPYAREA
1589 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001590 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001591 help
1592 This driver supports notebooks with NeoMagic PCI chips.
1593 Say Y if you have such a graphics card.
1594
1595 To compile this driver as a module, choose M here: the
1596 module will be called neofb.
1597
1598config FB_KYRO
1599 tristate "IMG Kyro support"
1600 depends on FB && PCI
1601 select FB_CFB_FILLRECT
1602 select FB_CFB_COPYAREA
1603 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001604 help
1605 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1606 graphics board.
1607
1608 To compile this driver as a module, choose M here: the
1609 module will be called kyrofb.
1610
1611config FB_3DFX
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001612 tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001613 depends on FB && PCI
1614 select FB_CFB_IMAGEBLIT
1615 select FB_CFB_FILLRECT
1616 select FB_CFB_COPYAREA
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001617 select FB_MODE_HELPERS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001618 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001619 This driver supports graphics boards with the 3Dfx Banshee,
1620 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1621 such a graphics board.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001622
1623 To compile this driver as a module, choose M here: the
1624 module will be called tdfxfb.
1625
1626config FB_3DFX_ACCEL
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001627 bool "3Dfx Acceleration functions (EXPERIMENTAL)"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001628 depends on FB_3DFX && EXPERIMENTAL
1629 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001630 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1631 device driver with acceleration functions.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001632
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001633config FB_3DFX_I2C
1634 bool "Enable DDC/I2C support"
1635 depends on FB_3DFX && EXPERIMENTAL
1636 select FB_DDC
1637 default y
1638 help
1639 Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1640
Linus Torvalds1da177e2005-04-16 15:20:36 -07001641config FB_VOODOO1
1642 tristate "3Dfx Voodoo Graphics (sst1) support"
1643 depends on FB && PCI
1644 select FB_CFB_FILLRECT
1645 select FB_CFB_COPYAREA
1646 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001647 ---help---
1648 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1649 Voodoo2 (cvg) based graphics card.
1650
1651 To compile this driver as a module, choose M here: the
1652 module will be called sstfb.
1653
1654 WARNING: Do not use any application that uses the 3D engine
1655 (namely glide) while using this driver.
Dirk Hohndele4031492007-10-30 13:37:19 -07001656 Please read the <file:Documentation/fb/sstfb.txt> for supported
Linus Torvalds1da177e2005-04-16 15:20:36 -07001657 options and other important info support.
1658
Ondrej Zajicek558b7bd2007-05-09 02:35:31 -07001659config FB_VT8623
1660 tristate "VIA VT8623 support"
1661 depends on FB && PCI
1662 select FB_CFB_FILLRECT
1663 select FB_CFB_COPYAREA
1664 select FB_CFB_IMAGEBLIT
1665 select FB_TILEBLITTING
1666 select FB_SVGALIB
1667 select VGASTATE
1668 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1669 ---help---
1670 Driver for CastleRock integrated graphics core in the
1671 VIA VT8623 [Apollo CLE266] chipset.
1672
Linus Torvalds1da177e2005-04-16 15:20:36 -07001673config FB_TRIDENT
Krzysztof Helt04645fc2009-03-31 15:25:48 -07001674 tristate "Trident/CyberXXX/CyberBlade support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001675 depends on FB && PCI
1676 select FB_CFB_FILLRECT
1677 select FB_CFB_COPYAREA
1678 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001679 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001680 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1681 Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
1682 and Blade XP.
1683 There are also integrated versions of these chips called CyberXXXX,
1684 CyberImage or CyberBlade. These chips are mostly found in laptops
Krzysztof Heltddb53d42009-03-31 15:25:40 -07001685 but also on some motherboards including early VIA EPIA motherboards.
1686 For more information, read <file:Documentation/fb/tridentfb.txt>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001687
1688 Say Y if you have such a graphics board.
1689
1690 To compile this driver as a module, choose M here: the
1691 module will be called tridentfb.
1692
Ondrej Zajicek681e1472007-05-09 02:35:31 -07001693config FB_ARK
1694 tristate "ARK 2000PV support"
1695 depends on FB && PCI
1696 select FB_CFB_FILLRECT
1697 select FB_CFB_COPYAREA
1698 select FB_CFB_IMAGEBLIT
1699 select FB_TILEBLITTING
1700 select FB_SVGALIB
1701 select VGASTATE
1702 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1703 ---help---
1704 Driver for PCI graphics boards with ARK 2000PV chip
1705 and ICS 5342 RAMDAC.
1706
Linus Torvalds1da177e2005-04-16 15:20:36 -07001707config FB_PM3
Krzysztof Heltf23a06f2007-05-10 22:23:25 -07001708 tristate "Permedia3 support (EXPERIMENTAL)"
1709 depends on FB && PCI && EXPERIMENTAL
1710 select FB_CFB_FILLRECT
1711 select FB_CFB_COPYAREA
1712 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001713 help
1714 This is the frame buffer device driver for the 3DLabs Permedia3
1715 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1716 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1717 and maybe other boards.
1718
Sebastian Siewior2ece5f432008-07-23 21:30:49 -07001719config FB_CARMINE
1720 tristate "Fujitsu carmine frame buffer support"
1721 depends on FB && PCI
1722 select FB_CFB_FILLRECT
1723 select FB_CFB_COPYAREA
1724 select FB_CFB_IMAGEBLIT
1725 help
1726 This is the frame buffer device driver for the Fujitsu Carmine chip.
1727 The driver provides two independent frame buffer devices.
1728
1729choice
1730 depends on FB_CARMINE
1731 prompt "DRAM timing"
1732 default FB_CARMINE_DRAM_EVAL
1733
1734config FB_CARMINE_DRAM_EVAL
1735 bool "Eval board timings"
1736 help
1737 Use timings which work on the eval card.
1738
1739config CARMINE_DRAM_CUSTOM
1740 bool "Custom board timings"
1741 help
1742 Use custom board timings.
1743endchoice
1744
Linus Torvalds1da177e2005-04-16 15:20:36 -07001745config FB_AU1100
1746 bool "Au1100 LCD Driver"
Ralf Baechled1709e42007-07-23 18:43:50 -07001747 depends on (FB = y) && MIPS && SOC_AU1100
1748 select FB_CFB_FILLRECT
1749 select FB_CFB_COPYAREA
1750 select FB_CFB_IMAGEBLIT
1751 help
1752 This is the framebuffer driver for the AMD Au1100 SOC. It can drive
1753 various panels and CRTs by passing in kernel cmd line option
1754 au1100fb:panel=<name>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001755
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001756config FB_AU1200
1757 bool "Au1200 LCD Driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001758 depends on (FB = y) && MIPS && SOC_AU1200
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001759 select FB_CFB_FILLRECT
1760 select FB_CFB_COPYAREA
1761 select FB_CFB_IMAGEBLIT
1762 help
1763 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1764 various panels and CRTs by passing in kernel cmd line option
1765 au1200fb:panel=<name>.
1766
Alexey Charkovd6ff7d02010-11-09 02:42:39 +03001767config FB_VT8500
1768 bool "VT8500 LCD Driver"
1769 depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_VT8500
1770 select FB_WMT_GE_ROPS
1771 select FB_SYS_IMAGEBLIT
1772 help
1773 This is the framebuffer driver for VIA VT8500 integrated LCD
1774 controller.
1775
1776config FB_WM8505
1777 bool "WM8505 frame buffer support"
1778 depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_WM8505
1779 select FB_WMT_GE_ROPS
1780 select FB_SYS_IMAGEBLIT
1781 help
1782 This is the framebuffer driver for WonderMedia WM8505
1783 integrated LCD controller.
1784
Linus Torvalds1da177e2005-04-16 15:20:36 -07001785source "drivers/video/geode/Kconfig"
1786
Linus Torvalds1da177e2005-04-16 15:20:36 -07001787config FB_HIT
1788 tristate "HD64461 Frame Buffer support"
1789 depends on FB && HD64461
1790 select FB_CFB_FILLRECT
1791 select FB_CFB_COPYAREA
1792 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001793 help
1794 This is the frame buffer device driver for the Hitachi HD64461 LCD
1795 frame buffer card.
1796
1797config FB_PMAG_AA
1798 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001799 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001800 select FB_CFB_FILLRECT
1801 select FB_CFB_COPYAREA
1802 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001803 help
1804 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1805 used mainly in the MIPS-based DECstation series.
1806
1807config FB_PMAG_BA
Maciej W. Rozycki335dc502007-02-05 16:28:28 -08001808 tristate "PMAG-BA TURBOchannel framebuffer support"
1809 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001810 select FB_CFB_FILLRECT
1811 select FB_CFB_COPYAREA
1812 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001813 help
1814 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1815 used mainly in the MIPS-based DECstation series.
1816
1817config FB_PMAGB_B
Maciej W. Rozycki9084b002007-02-05 16:28:29 -08001818 tristate "PMAGB-B TURBOchannel framebuffer support"
Maciej W. Rozycki28ea28a2007-10-16 01:29:28 -07001819 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001820 select FB_CFB_FILLRECT
1821 select FB_CFB_COPYAREA
1822 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001823 help
1824 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1825 in the MIPS-based DECstation series. The card is currently only
1826 supported in 1280x1024x8 mode.
1827
1828config FB_MAXINE
1829 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001830 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001831 select FB_CFB_FILLRECT
1832 select FB_CFB_COPYAREA
1833 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001834 help
1835 Support for the onboard framebuffer (1024x768x8) in the Personal
1836 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1837 Codename "Maxine").
1838
Linus Torvalds1da177e2005-04-16 15:20:36 -07001839config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001840 bool "G364 frame buffer support"
1841 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001842 select FB_CFB_FILLRECT
1843 select FB_CFB_COPYAREA
1844 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001845 help
1846 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1847 Olivetti M700-10 systems.
1848
1849config FB_68328
1850 bool "Motorola 68328 native frame buffer support"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001851 depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001852 select FB_CFB_FILLRECT
1853 select FB_CFB_COPYAREA
1854 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001855 help
1856 Say Y here if you want to support the built-in frame buffer of
1857 the Motorola 68328 CPU family.
1858
Lennert Buytenhek638772c2009-02-11 17:25:24 +08001859config FB_PXA168
1860 tristate "PXA168/910 LCD framebuffer support"
1861 depends on FB && (CPU_PXA168 || CPU_PXA910)
1862 select FB_CFB_FILLRECT
1863 select FB_CFB_COPYAREA
1864 select FB_CFB_IMAGEBLIT
1865 ---help---
1866 Frame buffer driver for the built-in LCD controller in the Marvell
1867 MMP processor.
1868
Linus Torvalds1da177e2005-04-16 15:20:36 -07001869config FB_PXA
1870 tristate "PXA LCD framebuffer support"
1871 depends on FB && ARCH_PXA
1872 select FB_CFB_FILLRECT
1873 select FB_CFB_COPYAREA
1874 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001875 ---help---
1876 Frame buffer driver for the built-in LCD controller in the Intel
1877 PXA2x0 processor.
1878
1879 This driver is also available as a module ( = code which can be
1880 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001881 module will be called pxafb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001882 say M here and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001883
1884 If unsure, say N.
1885
Eric Miao198fc102008-12-23 17:49:43 +08001886config FB_PXA_OVERLAY
1887 bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
1888 default n
1889 depends on FB_PXA && (PXA27x || PXA3xx)
1890
Eric Miao3c42a442008-04-30 00:52:26 -07001891config FB_PXA_SMARTPANEL
1892 bool "PXA Smartpanel LCD support"
Eric Miao7f1133c2008-04-30 00:52:27 -07001893 default n
Eric Miao3c42a442008-04-30 00:52:26 -07001894 depends on FB_PXA
1895
Linus Torvalds1da177e2005-04-16 15:20:36 -07001896config FB_PXA_PARAMETERS
1897 bool "PXA LCD command line parameters"
1898 default n
1899 depends on FB_PXA
1900 ---help---
1901 Enable the use of kernel command line or module parameters
1902 to configure the physical properties of the LCD panel when
1903 using the PXA LCD driver.
1904
1905 This option allows you to override the panel parameters
1906 supplied by the platform in order to support multiple
1907 different models of flatpanel. If you will only be using a
1908 single model of flatpanel then you can safely leave this
1909 option disabled.
1910
1911 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1912
Daniel Mack364dbdf2010-11-04 14:44:00 -04001913config PXA3XX_GCU
1914 tristate "PXA3xx 2D graphics accelerator driver"
1915 depends on FB_PXA
1916 help
1917 Kernelspace driver for the 2D graphics controller unit (GCU)
1918 found on PXA3xx processors. There is a counterpart driver in the
1919 DirectFB suite, see http://www.directfb.org/
1920
1921 If you compile this as a module, it will be called pxa3xx_gcu.
1922
Mike Rapoport22caf042006-07-14 00:24:34 -07001923config FB_MBX
1924 tristate "2700G LCD framebuffer support"
1925 depends on FB && ARCH_PXA
1926 select FB_CFB_FILLRECT
1927 select FB_CFB_COPYAREA
1928 select FB_CFB_IMAGEBLIT
1929 ---help---
1930 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1931 Accelerator
1932
1933config FB_MBX_DEBUG
1934 bool "Enable debugging info via debugfs"
1935 depends on FB_MBX && DEBUG_FS
1936 default n
1937 ---help---
1938 Enable this if you want debugging information using the debug
1939 filesystem (debugfs)
1940
1941 If unsure, say N.
1942
York Sun9b53a9e2008-04-28 02:15:34 -07001943config FB_FSL_DIU
1944 tristate "Freescale DIU framebuffer support"
1945 depends on FB && FSL_SOC
Anatolij Gustschin8b856f02010-07-23 04:00:39 +00001946 select FB_MODE_HELPERS
York Sun9b53a9e2008-04-28 02:15:34 -07001947 select FB_CFB_FILLRECT
1948 select FB_CFB_COPYAREA
1949 select FB_CFB_IMAGEBLIT
1950 select PPC_LIB_RHEAP
1951 ---help---
1952 Framebuffer driver for the Freescale SoC DIU
1953
Randy Dunlapecc41d52005-11-07 01:00:29 -08001954config FB_W100
1955 tristate "W100 frame buffer support"
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001956 depends on FB && ARCH_PXA
Randy Dunlapecc41d52005-11-07 01:00:29 -08001957 select FB_CFB_FILLRECT
1958 select FB_CFB_COPYAREA
1959 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001960 ---help---
1961 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001962 It can also drive the w3220 chip found on iPAQ hx4700.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001963
1964 This driver is also available as a module ( = code which can be
1965 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001966 module will be called w100fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001967 say M here and read <file:Documentation/kbuild/modules.txt>.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001968
1969 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001970
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001971config FB_SH_MOBILE_LCDC
1972 tristate "SuperH Mobile LCDC framebuffer support"
Magnus Damm7278a222010-03-10 11:33:10 +00001973 depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
Magnus Damm2540c112008-12-17 17:29:49 +09001974 select FB_SYS_FILLRECT
1975 select FB_SYS_COPYAREA
1976 select FB_SYS_IMAGEBLIT
1977 select FB_SYS_FOPS
Magnus Damm85645572008-12-19 15:34:41 +09001978 select FB_DEFERRED_IO
Alexandre Courbot3b0fd9d2011-02-16 03:49:01 +00001979 select FB_BACKLIGHT
Guennadi Liakhovetski9fd04fe2010-05-23 14:00:43 +00001980 select SH_MIPI_DSI if SH_LCD_MIPI_DSI
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001981 ---help---
1982 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1983
Guennadi Liakhovetski6011bde2010-07-21 10:13:21 +00001984config FB_SH_MOBILE_HDMI
1985 tristate "SuperH Mobile HDMI controller support"
1986 depends on FB_SH_MOBILE_LCDC
1987 select FB_MODE_HELPERS
Guennadi Liakhovetski630f2d42010-10-15 08:58:00 +02001988 select SOUND
1989 select SND
Kuninori Morimoto3056c702010-09-09 16:30:18 +09001990 select SND_SOC
Guennadi Liakhovetski6011bde2010-07-21 10:13:21 +00001991 ---help---
1992 Driver for the on-chip SH-Mobile HDMI controller.
1993
Damian7caa4342011-05-18 11:10:07 +00001994config FB_SH_MOBILE_MERAM
1995 tristate "SuperH Mobile MERAM read ahead support for LCDC"
1996 depends on FB_SH_MOBILE_LCDC
1997 default y
1998 ---help---
1999 Enable MERAM support for the SH-Mobile LCD controller.
2000
2001 This will allow for caching of the framebuffer to provide more
2002 reliable access under heavy main memory bus traffic situations.
2003 Up to 4 memory channels can be configured, allowing 4 RGB or
2004 2 YCbCr framebuffers to be configured.
2005
Dmitry Baryshkovb53cde32008-10-15 22:03:55 -07002006config FB_TMIO
2007 tristate "Toshiba Mobile IO FrameBuffer support"
2008 depends on FB && MFD_CORE
2009 select FB_CFB_FILLRECT
2010 select FB_CFB_COPYAREA
2011 select FB_CFB_IMAGEBLIT
2012 ---help---
2013 Frame buffer driver for the Toshiba Mobile IO integrated as found
2014 on the Sharp SL-6000 series
2015
2016 This driver is also available as a module ( = code which can be
2017 inserted and removed from the running kernel whenever you want). The
2018 module will be called tmiofb. If you want to compile it as a module,
2019 say M here and read <file:Documentation/kbuild/modules.txt>.
2020
2021 If unsure, say N.
2022
2023config FB_TMIO_ACCELL
2024 bool "tmiofb acceleration"
2025 depends on FB_TMIO
2026 default y
2027
Ben Dooksec549a02009-03-31 15:25:39 -07002028config FB_S3C
2029 tristate "Samsung S3C framebuffer support"
Ben Dooks45649fd2010-08-10 18:02:30 -07002030 depends on FB && S3C_DEV_FB
Ben Dooksec549a02009-03-31 15:25:39 -07002031 select FB_CFB_FILLRECT
2032 select FB_CFB_COPYAREA
2033 select FB_CFB_IMAGEBLIT
2034 ---help---
2035 Frame buffer driver for the built-in FB controller in the Samsung
2036 SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
2037 and the S3C64XX series such as the S3C6400 and S3C6410.
2038
2039 These chips all have the same basic framebuffer design with the
2040 actual capabilities depending on the chip. For instance the S3C6400
2041 and S3C6410 support 4 hardware windows whereas the S3C24XX series
2042 currently only have two.
2043
2044 Currently the support is only for the S3C6400 and S3C6410 SoCs.
2045
2046config FB_S3C_DEBUG_REGWRITE
2047 bool "Debug register writes"
2048 depends on FB_S3C
2049 ---help---
2050 Show all register writes via printk(KERN_DEBUG)
2051
Arnaud Patard20fd5762005-09-09 13:10:07 -07002052config FB_S3C2410
2053 tristate "S3C2410 LCD framebuffer support"
2054 depends on FB && ARCH_S3C2410
2055 select FB_CFB_FILLRECT
2056 select FB_CFB_COPYAREA
2057 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07002058 ---help---
2059 Frame buffer driver for the built-in LCD controller in the Samsung
2060 S3C2410 processor.
2061
2062 This driver is also available as a module ( = code which can be
2063 inserted and removed from the running kernel whenever you want). The
2064 module will be called s3c2410fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05002065 say M here and read <file:Documentation/kbuild/modules.txt>.
Arnaud Patard20fd5762005-09-09 13:10:07 -07002066
2067 If unsure, say N.
2068config FB_S3C2410_DEBUG
2069 bool "S3C2410 lcd debug messages"
2070 depends on FB_S3C2410
2071 help
2072 Turn on debugging messages. Note that you can set/unset at run time
2073 through sysfs
2074
Wang Qiang86619702010-03-10 15:21:47 -08002075config FB_NUC900
2076 bool "NUC900 LCD framebuffer support"
2077 depends on FB && ARCH_W90X900
2078 select FB_CFB_FILLRECT
2079 select FB_CFB_COPYAREA
2080 select FB_CFB_IMAGEBLIT
2081 ---help---
2082 Frame buffer driver for the built-in LCD controller in the Nuvoton
2083 NUC900 processor
2084
2085config GPM1040A0_320X240
2086 bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
2087 depends on FB_NUC900
2088
2089config FB_NUC900_DEBUG
2090 bool "NUC900 lcd debug messages"
2091 depends on FB_NUC900
2092 help
2093 Turn on debugging messages. Note that you can set/unset at run time
2094 through sysfs
2095
Ben Dooks5fc404e2007-02-20 13:58:21 -08002096config FB_SM501
2097 tristate "Silicon Motion SM501 framebuffer support"
2098 depends on FB && MFD_SM501
2099 select FB_CFB_FILLRECT
2100 select FB_CFB_COPYAREA
2101 select FB_CFB_IMAGEBLIT
2102 ---help---
2103 Frame buffer driver for the CRT and LCD controllers in the Silicon
2104 Motion SM501.
2105
2106 This driver is also available as a module ( = code which can be
2107 inserted and removed from the running kernel whenever you want). The
2108 module will be called sm501fb. If you want to compile it as a module,
Dirk Hohndele4031492007-10-30 13:37:19 -07002109 say M here and read <file:Documentation/kbuild/modules.txt>.
Ben Dooks5fc404e2007-02-20 13:58:21 -08002110
2111 If unsure, say N.
2112
Paul Mundt96f8d862010-11-16 14:00:24 +09002113config FB_UDL
2114 tristate "Displaylink USB Framebuffer support"
2115 depends on FB && USB
2116 select FB_MODE_HELPERS
2117 select FB_SYS_FILLRECT
2118 select FB_SYS_COPYAREA
2119 select FB_SYS_IMAGEBLIT
2120 select FB_SYS_FOPS
2121 select FB_DEFERRED_IO
2122 ---help---
2123 This is a kernel framebuffer driver for DisplayLink USB devices.
2124 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
2125 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
2126 To compile as a module, choose M here: the module name is udlfb.
Ben Dooks5fc404e2007-02-20 13:58:21 -08002127
Vitaly Wool36c93662006-07-03 00:24:19 -07002128config FB_PNX4008_DUM
2129 tristate "Display Update Module support on Philips PNX4008 board"
2130 depends on FB && ARCH_PNX4008
2131 ---help---
2132 Say Y here to enable support for PNX4008 Display Update Module (DUM)
2133
2134config FB_PNX4008_DUM_RGB
2135 tristate "RGB Framebuffer support on Philips PNX4008 board"
2136 depends on FB_PNX4008_DUM
2137 select FB_CFB_FILLRECT
2138 select FB_CFB_COPYAREA
2139 select FB_CFB_IMAGEBLIT
2140 ---help---
2141 Say Y here to enable support for PNX4008 RGB Framebuffer
2142
Paul Mackerrasa3d89982006-12-10 02:20:42 -08002143config FB_IBM_GXT4500
2144 tristate "Framebuffer support for IBM GXT4500P adaptor"
Randy Dunlap0058f472007-10-16 01:29:35 -07002145 depends on FB && PPC
Paul Mackerrasa3d89982006-12-10 02:20:42 -08002146 select FB_CFB_FILLRECT
2147 select FB_CFB_COPYAREA
2148 select FB_CFB_IMAGEBLIT
2149 ---help---
2150 Say Y here to enable support for the IBM GXT4500P display
2151 adaptor, found on some IBM System P (pSeries) machines.
2152
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08002153config FB_PS3
Geert Uytterhoeven9e6b99b2007-06-16 08:05:38 +10002154 tristate "PS3 GPU framebuffer driver"
2155 depends on FB && PS3_PS3AV
Geert Uytterhoeven92c45792007-05-23 13:57:50 -07002156 select FB_SYS_FILLRECT
2157 select FB_SYS_COPYAREA
2158 select FB_SYS_IMAGEBLIT
2159 select FB_SYS_FOPS
Geert Uytterhoeven23e9c942007-07-21 04:37:49 -07002160 select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08002161 ---help---
2162 Include support for the virtual frame buffer in the PS3 platform.
2163
2164config FB_PS3_DEFAULT_SIZE_M
2165 int "PS3 default frame buffer size (in MiB)"
2166 depends on FB_PS3
Geert Uytterhoeven50b25292007-07-21 04:37:50 -07002167 default 9
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08002168 ---help---
2169 This is the default size (in MiB) of the virtual frame buffer in
2170 the PS3.
2171 The default value can be overridden on the kernel command line
2172 using the "ps3fb" option (e.g. "ps3fb=9M");
2173
Andrei Konovalov147394c2007-05-08 00:40:18 -07002174config FB_XILINX
2175 tristate "Xilinx frame buffer support"
Michal Simek6fa612b2009-05-11 15:49:12 +02002176 depends on FB && (XILINX_VIRTEX || MICROBLAZE)
Andrei Konovalov147394c2007-05-08 00:40:18 -07002177 select FB_CFB_FILLRECT
2178 select FB_CFB_COPYAREA
2179 select FB_CFB_IMAGEBLIT
2180 ---help---
2181 Include support for the Xilinx ML300/ML403 reference design
2182 framebuffer. ML300 carries a 640*480 LCD display on the board,
2183 ML403 uses a standard DB15 VGA connector.
2184
Yoichi Yuasa5abe3b42008-07-23 21:31:40 -07002185config FB_COBALT
2186 tristate "Cobalt server LCD frame buffer support"
2187 depends on FB && MIPS_COBALT
2188
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002189config FB_SH7760
Nobuhiro Iwamatsu5c72f302008-11-21 14:35:29 +09002190 bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
2191 depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
2192 || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
2193 select FB_CFB_FILLRECT
2194 select FB_CFB_COPYAREA
2195 select FB_CFB_IMAGEBLIT
2196 ---help---
2197 Support for the SH7760/SH7763/SH7720/SH7721 integrated
2198 (D)STN/TFT LCD Controller.
2199 Supports display resolutions up to 1024x1024 pixel, grayscale and
2200 color operation, with depths ranging from 1 bpp to 8 bpp monochrome
2201 and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
2202 panels <= 320 pixel horizontal resolution.
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002203
Sudhakar Rajashekhara4ed824d2009-09-22 16:47:06 -07002204config FB_DA8XX
2205 tristate "DA8xx/OMAP-L1xx Framebuffer support"
2206 depends on FB && ARCH_DAVINCI_DA8XX
2207 select FB_CFB_FILLRECT
2208 select FB_CFB_COPYAREA
2209 select FB_CFB_IMAGEBLIT
2210 ---help---
2211 This is the frame buffer device driver for the TI LCD controller
2212 found on DA8xx/OMAP-L1xx SoCs.
2213 If unsure, say N.
2214
Linus Torvalds1da177e2005-04-16 15:20:36 -07002215config FB_VIRTUAL
2216 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2217 depends on FB
Antonino A. Daplas87b48842007-05-08 00:39:01 -07002218 select FB_SYS_FILLRECT
2219 select FB_SYS_COPYAREA
2220 select FB_SYS_IMAGEBLIT
Antonino A. Daplas52102c02007-05-08 00:39:07 -07002221 select FB_SYS_FOPS
Linus Torvalds1da177e2005-04-16 15:20:36 -07002222 ---help---
2223 This is a `virtual' frame buffer device. It operates on a chunk of
2224 unswappable kernel memory instead of on the memory of a graphics
2225 board. This means you cannot see any output sent to this frame
2226 buffer device, while it does consume precious memory. The main use
2227 of this frame buffer device is testing and debugging the frame
2228 buffer subsystem. Do NOT enable it for normal systems! To protect
2229 the innocent, it has to be enabled explicitly at boot time using the
2230 kernel option `video=vfb:'.
2231
2232 To compile this driver as a module, choose M here: the
Mike Frysinger66cf7512006-10-03 01:14:41 -07002233 module will be called vfb. In order to load it, you must use
2234 the vfb_enable=1 option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002235
2236 If unsure, say N.
James Simmonse0e34ef2007-02-10 14:15:43 +00002237
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002238config XEN_FBDEV_FRONTEND
2239 tristate "Xen virtual frame buffer support"
2240 depends on FB && XEN
2241 select FB_SYS_FILLRECT
2242 select FB_SYS_COPYAREA
2243 select FB_SYS_IMAGEBLIT
2244 select FB_SYS_FOPS
2245 select FB_DEFERRED_IO
Konrad Rzeszutek Wilkba69ea42009-10-08 13:23:08 -04002246 select XEN_XENBUS_FRONTEND
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002247 default y
2248 help
2249 This driver implements the front-end of the Xen virtual
2250 frame buffer driver. It communicates with a back-end
2251 in another domain.
2252
Jaya Kumare9355082008-08-19 11:17:55 +01002253config FB_METRONOME
2254 tristate "E-Ink Metronome/8track controller support"
2255 depends on FB
2256 select FB_SYS_FILLRECT
2257 select FB_SYS_COPYAREA
2258 select FB_SYS_IMAGEBLIT
2259 select FB_SYS_FOPS
2260 select FB_DEFERRED_IO
2261 help
2262 This driver implements support for the E-Ink Metronome
2263 controller. The pre-release name for this device was 8track
2264 and could also have been called by some vendors as PVI-nnnn.
2265
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002266config FB_MB862XX
2267 tristate "Fujitsu MB862xx GDC support"
2268 depends on FB
Ben Hutchingsb9b52cf2011-05-12 12:42:17 +00002269 depends on PCI || (OF && PPC)
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002270 select FB_CFB_FILLRECT
2271 select FB_CFB_COPYAREA
2272 select FB_CFB_IMAGEBLIT
2273 ---help---
2274 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2275
Ben Hutchingsb9b52cf2011-05-12 12:42:17 +00002276choice
2277 prompt "GDC variant"
2278 depends on FB_MB862XX
2279
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002280config FB_MB862XX_PCI_GDC
2281 bool "Carmine/Coral-P(A) GDC"
Ben Hutchingsb9b52cf2011-05-12 12:42:17 +00002282 depends on PCI
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002283 ---help---
2284 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2285 PCI graphics controller devices.
2286
2287config FB_MB862XX_LIME
2288 bool "Lime GDC"
Ben Hutchingsb9b52cf2011-05-12 12:42:17 +00002289 depends on OF && PPC
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002290 select FB_FOREIGN_ENDIAN
2291 select FB_LITTLE_ENDIAN
2292 ---help---
2293 Framebuffer support for Fujitsu Lime GDC on host CPU bus.
2294
Ben Hutchingsb9b52cf2011-05-12 12:42:17 +00002295endchoice
2296
Anatolij Gustschinf8a6b1f2011-05-24 15:19:48 +02002297config FB_MB862XX_I2C
2298 bool "Support I2C bus on MB862XX GDC"
2299 depends on FB_MB862XX && I2C
2300 default y
2301 help
2302 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2303 driver to support accessing I2C devices on controller's I2C bus.
2304 These are usually some video decoder chips.
2305
Ryan Mallon88017bd2009-09-22 16:47:09 -07002306config FB_EP93XX
2307 tristate "EP93XX frame buffer support"
2308 depends on FB && ARCH_EP93XX
2309 select FB_CFB_FILLRECT
2310 select FB_CFB_COPYAREA
2311 select FB_CFB_IMAGEBLIT
2312 ---help---
2313 Framebuffer driver for the Cirrus Logic EP93XX series of processors.
2314 This driver is also available as a module. The module will be called
2315 ep93xx-fb.
2316
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002317config FB_PRE_INIT_FB
2318 bool "Don't reinitialize, use bootloader's GDC/Display configuration"
Guennadi Liakhovetski93f40e62009-11-11 14:26:47 -08002319 depends on FB && FB_MB862XX_LIME
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002320 ---help---
2321 Select this option if display contents should be inherited as set by
2322 the bootloader.
2323
Pavel Machekd480ace2009-09-22 16:47:03 -07002324config FB_MSM
Pavel Machek4e00dc72009-12-08 11:10:28 -08002325 tristate "MSM Framebuffer support"
Pavel Machekd480ace2009-09-22 16:47:03 -07002326 depends on FB && ARCH_MSM
2327 select FB_CFB_FILLRECT
2328 select FB_CFB_COPYAREA
2329 select FB_CFB_IMAGEBLIT
Pavel Machekd480ace2009-09-22 16:47:03 -07002330
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002331config FB_MX3
Guennadi Liakhovetski6e1588c2009-02-26 21:34:28 +01002332 tristate "MX3 Framebuffer support"
2333 depends on FB && MX3_IPU
2334 select FB_CFB_FILLRECT
2335 select FB_CFB_COPYAREA
2336 select FB_CFB_IMAGEBLIT
2337 default y
2338 help
2339 This is a framebuffer device for the i.MX31 LCD Controller. So
2340 far only synchronous displays are supported. If you plan to use
2341 an LCD display with your i.MX31 system, say Y here.
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002342
Jaya Kumar0d4ff4d2009-01-01 17:49:19 +01002343config FB_BROADSHEET
2344 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2345 depends on FB
2346 select FB_SYS_FILLRECT
2347 select FB_SYS_COPYAREA
2348 select FB_SYS_IMAGEBLIT
2349 select FB_SYS_FOPS
2350 select FB_DEFERRED_IO
2351 help
2352 This driver implements support for the E-Ink Broadsheet
2353 controller. The release name for this device was Epson S1D13521
2354 and could also have been called by other names when coupled with
2355 a bridge adapter.
2356
Lars-Peter Clausen7a92d542010-07-17 11:14:34 +00002357config FB_JZ4740
2358 tristate "JZ4740 LCD framebuffer support"
2359 depends on FB && MACH_JZ4740
2360 select FB_SYS_FILLRECT
2361 select FB_SYS_COPYAREA
2362 select FB_SYS_IMAGEBLIT
2363 help
2364 Framebuffer support for the JZ4740 SoC.
2365
Sascha Hauerf0a523b2011-01-14 15:22:31 +01002366config FB_MXS
2367 tristate "MXS LCD framebuffer support"
2368 depends on FB && ARCH_MXS
2369 select FB_CFB_FILLRECT
2370 select FB_CFB_COPYAREA
2371 select FB_CFB_IMAGEBLIT
2372 help
2373 Framebuffer support for the MXS SoC.
2374
GuanXuetaoce443ab2011-02-26 21:39:10 +08002375config FB_PUV3_UNIGFX
2376 tristate "PKUnity v3 Unigfx framebuffer support"
2377 depends on FB && UNICORE32 && ARCH_PUV3
2378 select FB_SYS_FILLRECT
2379 select FB_SYS_COPYAREA
2380 select FB_SYS_IMAGEBLIT
2381 select FB_SYS_FOPS
2382 help
2383 Choose this option if you want to use the Unigfx device as a
2384 framebuffer device. Without the support of PCI & AGP.
2385
Randy Dunlapf08f3892007-10-29 14:37:16 -07002386source "drivers/video/omap/Kconfig"
Tomi Valkeinenafedec12009-08-07 12:01:55 +03002387source "drivers/video/omap2/Kconfig"
Randy Dunlap0058f472007-10-16 01:29:35 -07002388
Randy Dunlap179b0252007-10-16 01:29:39 -07002389source "drivers/video/backlight/Kconfig"
2390source "drivers/video/display/Kconfig"
2391
Linus Torvalds1da177e2005-04-16 15:20:36 -07002392if VT
2393 source "drivers/video/console/Kconfig"
2394endif
2395
2396if FB || SGI_NEWPORT_CONSOLE
2397 source "drivers/video/logo/Kconfig"
2398endif
2399
Linus Torvalds1da177e2005-04-16 15:20:36 -07002400endmenu