Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 1 | /* |
| 2 | * Driver for Alauda-based card readers |
| 3 | * |
| 4 | * Current development and maintenance by: |
| 5 | * (c) 2005 Daniel Drake <dsd@gentoo.org> |
| 6 | * |
| 7 | * The 'Alauda' is a chip manufacturered by RATOC for OEM use. |
| 8 | * |
| 9 | * Alauda implements a vendor-specific command set to access two media reader |
| 10 | * ports (XD, SmartMedia). This driver converts SCSI commands to the commands |
| 11 | * which are accepted by these devices. |
| 12 | * |
| 13 | * The driver was developed through reverse-engineering, with the help of the |
| 14 | * sddr09 driver which has many similarities, and with some help from the |
| 15 | * (very old) vendor-supplied GPL sma03 driver. |
| 16 | * |
| 17 | * For protocol info, see http://alauda.sourceforge.net |
| 18 | * |
| 19 | * This program is free software; you can redistribute it and/or modify it |
| 20 | * under the terms of the GNU General Public License as published by the |
| 21 | * Free Software Foundation; either version 2, or (at your option) any |
| 22 | * later version. |
| 23 | * |
| 24 | * This program is distributed in the hope that it will be useful, but |
| 25 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 26 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 27 | * General Public License for more details. |
| 28 | * |
| 29 | * You should have received a copy of the GNU General Public License along |
| 30 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 31 | * 675 Mass Ave, Cambridge, MA 02139, USA. |
| 32 | */ |
| 33 | |
| 34 | #include <scsi/scsi.h> |
| 35 | #include <scsi/scsi_cmnd.h> |
| 36 | #include <scsi/scsi_device.h> |
| 37 | |
| 38 | #include "usb.h" |
| 39 | #include "transport.h" |
| 40 | #include "protocol.h" |
| 41 | #include "debug.h" |
| 42 | #include "alauda.h" |
| 43 | |
| 44 | #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) |
| 45 | #define LSB_of(s) ((s)&0xFF) |
| 46 | #define MSB_of(s) ((s)>>8) |
| 47 | |
| 48 | #define MEDIA_PORT(us) us->srb->device->lun |
| 49 | #define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)] |
| 50 | |
| 51 | #define PBA_LO(pba) ((pba & 0xF) << 5) |
| 52 | #define PBA_HI(pba) (pba >> 3) |
| 53 | #define PBA_ZONE(pba) (pba >> 11) |
| 54 | |
| 55 | /* |
| 56 | * Media handling |
| 57 | */ |
| 58 | |
| 59 | struct alauda_card_info { |
| 60 | unsigned char id; /* id byte */ |
| 61 | unsigned char chipshift; /* 1<<cs bytes total capacity */ |
| 62 | unsigned char pageshift; /* 1<<ps bytes in a page */ |
| 63 | unsigned char blockshift; /* 1<<bs pages per block */ |
| 64 | unsigned char zoneshift; /* 1<<zs blocks per zone */ |
| 65 | }; |
| 66 | |
| 67 | static struct alauda_card_info alauda_card_ids[] = { |
| 68 | /* NAND flash */ |
| 69 | { 0x6e, 20, 8, 4, 8}, /* 1 MB */ |
| 70 | { 0xe8, 20, 8, 4, 8}, /* 1 MB */ |
| 71 | { 0xec, 20, 8, 4, 8}, /* 1 MB */ |
| 72 | { 0x64, 21, 8, 4, 9}, /* 2 MB */ |
| 73 | { 0xea, 21, 8, 4, 9}, /* 2 MB */ |
| 74 | { 0x6b, 22, 9, 4, 9}, /* 4 MB */ |
| 75 | { 0xe3, 22, 9, 4, 9}, /* 4 MB */ |
| 76 | { 0xe5, 22, 9, 4, 9}, /* 4 MB */ |
| 77 | { 0xe6, 23, 9, 4, 10}, /* 8 MB */ |
| 78 | { 0x73, 24, 9, 5, 10}, /* 16 MB */ |
| 79 | { 0x75, 25, 9, 5, 10}, /* 32 MB */ |
| 80 | { 0x76, 26, 9, 5, 10}, /* 64 MB */ |
| 81 | { 0x79, 27, 9, 5, 10}, /* 128 MB */ |
| 82 | { 0x71, 28, 9, 5, 10}, /* 256 MB */ |
| 83 | |
| 84 | /* MASK ROM */ |
| 85 | { 0x5d, 21, 9, 4, 8}, /* 2 MB */ |
| 86 | { 0xd5, 22, 9, 4, 9}, /* 4 MB */ |
| 87 | { 0xd6, 23, 9, 4, 10}, /* 8 MB */ |
| 88 | { 0x57, 24, 9, 4, 11}, /* 16 MB */ |
| 89 | { 0x58, 25, 9, 4, 12}, /* 32 MB */ |
| 90 | { 0,} |
| 91 | }; |
| 92 | |
| 93 | static struct alauda_card_info *alauda_card_find_id(unsigned char id) { |
| 94 | int i; |
| 95 | |
| 96 | for (i = 0; alauda_card_ids[i].id != 0; i++) |
| 97 | if (alauda_card_ids[i].id == id) |
| 98 | return &(alauda_card_ids[i]); |
| 99 | return NULL; |
| 100 | } |
| 101 | |
| 102 | /* |
| 103 | * ECC computation. |
| 104 | */ |
| 105 | |
| 106 | static unsigned char parity[256]; |
| 107 | static unsigned char ecc2[256]; |
| 108 | |
| 109 | static void nand_init_ecc(void) { |
| 110 | int i, j, a; |
| 111 | |
| 112 | parity[0] = 0; |
| 113 | for (i = 1; i < 256; i++) |
| 114 | parity[i] = (parity[i&(i-1)] ^ 1); |
| 115 | |
| 116 | for (i = 0; i < 256; i++) { |
| 117 | a = 0; |
| 118 | for (j = 0; j < 8; j++) { |
| 119 | if (i & (1<<j)) { |
| 120 | if ((j & 1) == 0) |
| 121 | a ^= 0x04; |
| 122 | if ((j & 2) == 0) |
| 123 | a ^= 0x10; |
| 124 | if ((j & 4) == 0) |
| 125 | a ^= 0x40; |
| 126 | } |
| 127 | } |
| 128 | ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0)); |
| 129 | } |
| 130 | } |
| 131 | |
| 132 | /* compute 3-byte ecc on 256 bytes */ |
| 133 | static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) { |
| 134 | int i, j, a; |
| 135 | unsigned char par, bit, bits[8]; |
| 136 | |
| 137 | par = 0; |
| 138 | for (j = 0; j < 8; j++) |
| 139 | bits[j] = 0; |
| 140 | |
| 141 | /* collect 16 checksum bits */ |
| 142 | for (i = 0; i < 256; i++) { |
| 143 | par ^= data[i]; |
| 144 | bit = parity[data[i]]; |
| 145 | for (j = 0; j < 8; j++) |
| 146 | if ((i & (1<<j)) == 0) |
| 147 | bits[j] ^= bit; |
| 148 | } |
| 149 | |
| 150 | /* put 4+4+4 = 12 bits in the ecc */ |
| 151 | a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0]; |
| 152 | ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); |
| 153 | |
| 154 | a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4]; |
| 155 | ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); |
| 156 | |
| 157 | ecc[2] = ecc2[par]; |
| 158 | } |
| 159 | |
| 160 | static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) { |
| 161 | return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]); |
| 162 | } |
| 163 | |
| 164 | static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { |
| 165 | memcpy(data, ecc, 3); |
| 166 | } |
| 167 | |
| 168 | /* |
| 169 | * Alauda driver |
| 170 | */ |
| 171 | |
| 172 | /* |
| 173 | * Forget our PBA <---> LBA mappings for a particular port |
| 174 | */ |
| 175 | static void alauda_free_maps (struct alauda_media_info *media_info) |
| 176 | { |
| 177 | unsigned int shift = media_info->zoneshift |
| 178 | + media_info->blockshift + media_info->pageshift; |
| 179 | unsigned int num_zones = media_info->capacity >> shift; |
| 180 | unsigned int i; |
| 181 | |
| 182 | if (media_info->lba_to_pba != NULL) |
| 183 | for (i = 0; i < num_zones; i++) { |
| 184 | kfree(media_info->lba_to_pba[i]); |
| 185 | media_info->lba_to_pba[i] = NULL; |
| 186 | } |
| 187 | |
| 188 | if (media_info->pba_to_lba != NULL) |
| 189 | for (i = 0; i < num_zones; i++) { |
| 190 | kfree(media_info->pba_to_lba[i]); |
| 191 | media_info->pba_to_lba[i] = NULL; |
| 192 | } |
| 193 | } |
| 194 | |
| 195 | /* |
| 196 | * Returns 2 bytes of status data |
| 197 | * The first byte describes media status, and second byte describes door status |
| 198 | */ |
| 199 | static int alauda_get_media_status(struct us_data *us, unsigned char *data) |
| 200 | { |
| 201 | int rc; |
| 202 | unsigned char command; |
| 203 | |
| 204 | if (MEDIA_PORT(us) == ALAUDA_PORT_XD) |
| 205 | command = ALAUDA_GET_XD_MEDIA_STATUS; |
| 206 | else |
| 207 | command = ALAUDA_GET_SM_MEDIA_STATUS; |
| 208 | |
| 209 | rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, |
| 210 | command, 0xc0, 0, 1, data, 2); |
| 211 | |
| 212 | US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n", |
| 213 | data[0], data[1]); |
| 214 | |
| 215 | return rc; |
| 216 | } |
| 217 | |
| 218 | /* |
| 219 | * Clears the "media was changed" bit so that we know when it changes again |
| 220 | * in the future. |
| 221 | */ |
| 222 | static int alauda_ack_media(struct us_data *us) |
| 223 | { |
| 224 | unsigned char command; |
| 225 | |
| 226 | if (MEDIA_PORT(us) == ALAUDA_PORT_XD) |
| 227 | command = ALAUDA_ACK_XD_MEDIA_CHANGE; |
| 228 | else |
| 229 | command = ALAUDA_ACK_SM_MEDIA_CHANGE; |
| 230 | |
| 231 | return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, |
| 232 | command, 0x40, 0, 1, NULL, 0); |
| 233 | } |
| 234 | |
| 235 | /* |
| 236 | * Retrieves a 4-byte media signature, which indicates manufacturer, capacity, |
| 237 | * and some other details. |
| 238 | */ |
| 239 | static int alauda_get_media_signature(struct us_data *us, unsigned char *data) |
| 240 | { |
| 241 | unsigned char command; |
| 242 | |
| 243 | if (MEDIA_PORT(us) == ALAUDA_PORT_XD) |
| 244 | command = ALAUDA_GET_XD_MEDIA_SIG; |
| 245 | else |
| 246 | command = ALAUDA_GET_SM_MEDIA_SIG; |
| 247 | |
| 248 | return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, |
| 249 | command, 0xc0, 0, 0, data, 4); |
| 250 | } |
| 251 | |
| 252 | /* |
| 253 | * Resets the media status (but not the whole device?) |
| 254 | */ |
| 255 | static int alauda_reset_media(struct us_data *us) |
| 256 | { |
| 257 | unsigned char *command = us->iobuf; |
| 258 | |
| 259 | memset(command, 0, 9); |
| 260 | command[0] = ALAUDA_BULK_CMD; |
| 261 | command[1] = ALAUDA_BULK_RESET_MEDIA; |
| 262 | command[8] = MEDIA_PORT(us); |
| 263 | |
| 264 | return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| 265 | command, 9, NULL); |
| 266 | } |
| 267 | |
| 268 | /* |
| 269 | * Examines the media and deduces capacity, etc. |
| 270 | */ |
| 271 | static int alauda_init_media(struct us_data *us) |
| 272 | { |
| 273 | unsigned char *data = us->iobuf; |
| 274 | int ready = 0; |
| 275 | struct alauda_card_info *media_info; |
| 276 | unsigned int num_zones; |
| 277 | |
| 278 | while (ready == 0) { |
| 279 | msleep(20); |
| 280 | |
| 281 | if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) |
| 282 | return USB_STOR_TRANSPORT_ERROR; |
| 283 | |
| 284 | if (data[0] & 0x10) |
| 285 | ready = 1; |
| 286 | } |
| 287 | |
| 288 | US_DEBUGP("alauda_init_media: We are ready for action!\n"); |
| 289 | |
| 290 | if (alauda_ack_media(us) != USB_STOR_XFER_GOOD) |
| 291 | return USB_STOR_TRANSPORT_ERROR; |
| 292 | |
| 293 | msleep(10); |
| 294 | |
| 295 | if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) |
| 296 | return USB_STOR_TRANSPORT_ERROR; |
| 297 | |
| 298 | if (data[0] != 0x14) { |
| 299 | US_DEBUGP("alauda_init_media: Media not ready after ack\n"); |
| 300 | return USB_STOR_TRANSPORT_ERROR; |
| 301 | } |
| 302 | |
| 303 | if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD) |
| 304 | return USB_STOR_TRANSPORT_ERROR; |
| 305 | |
| 306 | US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n", |
| 307 | data[0], data[1], data[2], data[3]); |
| 308 | media_info = alauda_card_find_id(data[1]); |
| 309 | if (media_info == NULL) { |
| 310 | printk("alauda_init_media: Unrecognised media signature: " |
| 311 | "%02X %02X %02X %02X\n", |
| 312 | data[0], data[1], data[2], data[3]); |
| 313 | return USB_STOR_TRANSPORT_ERROR; |
| 314 | } |
| 315 | |
| 316 | MEDIA_INFO(us).capacity = 1 << media_info->chipshift; |
| 317 | US_DEBUGP("Found media with capacity: %ldMB\n", |
| 318 | MEDIA_INFO(us).capacity >> 20); |
| 319 | |
| 320 | MEDIA_INFO(us).pageshift = media_info->pageshift; |
| 321 | MEDIA_INFO(us).blockshift = media_info->blockshift; |
| 322 | MEDIA_INFO(us).zoneshift = media_info->zoneshift; |
| 323 | |
| 324 | MEDIA_INFO(us).pagesize = 1 << media_info->pageshift; |
| 325 | MEDIA_INFO(us).blocksize = 1 << media_info->blockshift; |
| 326 | MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift; |
| 327 | |
| 328 | MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125; |
| 329 | MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1; |
| 330 | |
| 331 | num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift |
| 332 | + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); |
| 333 | MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); |
| 334 | MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); |
| 335 | |
| 336 | if (alauda_reset_media(us) != USB_STOR_XFER_GOOD) |
| 337 | return USB_STOR_TRANSPORT_ERROR; |
| 338 | |
| 339 | return USB_STOR_TRANSPORT_GOOD; |
| 340 | } |
| 341 | |
| 342 | /* |
| 343 | * Examines the media status and does the right thing when the media has gone, |
| 344 | * appeared, or changed. |
| 345 | */ |
| 346 | static int alauda_check_media(struct us_data *us) |
| 347 | { |
| 348 | struct alauda_info *info = (struct alauda_info *) us->extra; |
| 349 | unsigned char status[2]; |
| 350 | int rc; |
| 351 | |
| 352 | rc = alauda_get_media_status(us, status); |
| 353 | |
| 354 | /* Check for no media or door open */ |
| 355 | if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) |
| 356 | || ((status[1] & 0x01) == 0)) { |
| 357 | US_DEBUGP("alauda_check_media: No media, or door open\n"); |
| 358 | alauda_free_maps(&MEDIA_INFO(us)); |
| 359 | info->sense_key = 0x02; |
| 360 | info->sense_asc = 0x3A; |
| 361 | info->sense_ascq = 0x00; |
| 362 | return USB_STOR_TRANSPORT_FAILED; |
| 363 | } |
| 364 | |
| 365 | /* Check for media change */ |
| 366 | if (status[0] & 0x08) { |
| 367 | US_DEBUGP("alauda_check_media: Media change detected\n"); |
| 368 | alauda_free_maps(&MEDIA_INFO(us)); |
| 369 | alauda_init_media(us); |
| 370 | |
| 371 | info->sense_key = UNIT_ATTENTION; |
| 372 | info->sense_asc = 0x28; |
| 373 | info->sense_ascq = 0x00; |
| 374 | return USB_STOR_TRANSPORT_FAILED; |
| 375 | } |
| 376 | |
| 377 | return USB_STOR_TRANSPORT_GOOD; |
| 378 | } |
| 379 | |
| 380 | /* |
| 381 | * Checks the status from the 2nd status register |
| 382 | * Returns 3 bytes of status data, only the first is known |
| 383 | */ |
| 384 | static int alauda_check_status2(struct us_data *us) |
| 385 | { |
| 386 | int rc; |
| 387 | unsigned char command[] = { |
| 388 | ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2, |
| 389 | 0, 0, 0, 0, 3, 0, MEDIA_PORT(us) |
| 390 | }; |
| 391 | unsigned char data[3]; |
| 392 | |
| 393 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| 394 | command, 9, NULL); |
| 395 | if (rc != USB_STOR_XFER_GOOD) |
| 396 | return rc; |
| 397 | |
| 398 | rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| 399 | data, 3, NULL); |
| 400 | if (rc != USB_STOR_XFER_GOOD) |
| 401 | return rc; |
| 402 | |
| 403 | US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]); |
| 404 | if (data[0] & ALAUDA_STATUS_ERROR) |
| 405 | return USB_STOR_XFER_ERROR; |
| 406 | |
| 407 | return USB_STOR_XFER_GOOD; |
| 408 | } |
| 409 | |
| 410 | /* |
| 411 | * Gets the redundancy data for the first page of a PBA |
| 412 | * Returns 16 bytes. |
| 413 | */ |
| 414 | static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data) |
| 415 | { |
| 416 | int rc; |
| 417 | unsigned char command[] = { |
| 418 | ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA, |
| 419 | PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us) |
| 420 | }; |
| 421 | |
| 422 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| 423 | command, 9, NULL); |
| 424 | if (rc != USB_STOR_XFER_GOOD) |
| 425 | return rc; |
| 426 | |
| 427 | return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| 428 | data, 16, NULL); |
| 429 | } |
| 430 | |
| 431 | /* |
| 432 | * Finds the first unused PBA in a zone |
| 433 | * Returns the absolute PBA of an unused PBA, or 0 if none found. |
| 434 | */ |
| 435 | static u16 alauda_find_unused_pba(struct alauda_media_info *info, |
| 436 | unsigned int zone) |
| 437 | { |
| 438 | u16 *pba_to_lba = info->pba_to_lba[zone]; |
| 439 | unsigned int i; |
| 440 | |
| 441 | for (i = 0; i < info->zonesize; i++) |
| 442 | if (pba_to_lba[i] == UNDEF) |
| 443 | return (zone << info->zoneshift) + i; |
| 444 | |
| 445 | return 0; |
| 446 | } |
| 447 | |
| 448 | /* |
| 449 | * Reads the redundancy data for all PBA's in a zone |
| 450 | * Produces lba <--> pba mappings |
| 451 | */ |
| 452 | static int alauda_read_map(struct us_data *us, unsigned int zone) |
| 453 | { |
| 454 | unsigned char *data = us->iobuf; |
| 455 | int result; |
| 456 | int i, j; |
| 457 | unsigned int zonesize = MEDIA_INFO(us).zonesize; |
| 458 | unsigned int uzonesize = MEDIA_INFO(us).uzonesize; |
| 459 | unsigned int lba_offset, lba_real, blocknum; |
| 460 | unsigned int zone_base_lba = zone * uzonesize; |
| 461 | unsigned int zone_base_pba = zone * zonesize; |
| 462 | u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); |
| 463 | u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); |
| 464 | if (lba_to_pba == NULL || pba_to_lba == NULL) { |
| 465 | result = USB_STOR_TRANSPORT_ERROR; |
| 466 | goto error; |
| 467 | } |
| 468 | |
| 469 | US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone); |
| 470 | |
| 471 | /* 1024 PBA's per zone */ |
| 472 | for (i = 0; i < zonesize; i++) |
| 473 | lba_to_pba[i] = pba_to_lba[i] = UNDEF; |
| 474 | |
| 475 | for (i = 0; i < zonesize; i++) { |
| 476 | blocknum = zone_base_pba + i; |
| 477 | |
| 478 | result = alauda_get_redu_data(us, blocknum, data); |
| 479 | if (result != USB_STOR_XFER_GOOD) { |
| 480 | result = USB_STOR_TRANSPORT_ERROR; |
| 481 | goto error; |
| 482 | } |
| 483 | |
| 484 | /* special PBAs have control field 0^16 */ |
| 485 | for (j = 0; j < 16; j++) |
| 486 | if (data[j] != 0) |
| 487 | goto nonz; |
| 488 | pba_to_lba[i] = UNUSABLE; |
| 489 | US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum); |
| 490 | continue; |
| 491 | |
| 492 | nonz: |
| 493 | /* unwritten PBAs have control field FF^16 */ |
| 494 | for (j = 0; j < 16; j++) |
| 495 | if (data[j] != 0xff) |
| 496 | goto nonff; |
| 497 | continue; |
| 498 | |
| 499 | nonff: |
| 500 | /* normal PBAs start with six FFs */ |
| 501 | if (j < 6) { |
| 502 | US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: " |
| 503 | "reserved area = %02X%02X%02X%02X " |
| 504 | "data status %02X block status %02X\n", |
| 505 | blocknum, data[0], data[1], data[2], data[3], |
| 506 | data[4], data[5]); |
| 507 | pba_to_lba[i] = UNUSABLE; |
| 508 | continue; |
| 509 | } |
| 510 | |
| 511 | if ((data[6] >> 4) != 0x01) { |
| 512 | US_DEBUGP("alauda_read_map: PBA %d has invalid address " |
| 513 | "field %02X%02X/%02X%02X\n", |
| 514 | blocknum, data[6], data[7], data[11], data[12]); |
| 515 | pba_to_lba[i] = UNUSABLE; |
| 516 | continue; |
| 517 | } |
| 518 | |
| 519 | /* check even parity */ |
| 520 | if (parity[data[6] ^ data[7]]) { |
| 521 | printk("alauda_read_map: Bad parity in LBA for block %d" |
| 522 | " (%02X %02X)\n", i, data[6], data[7]); |
| 523 | pba_to_lba[i] = UNUSABLE; |
| 524 | continue; |
| 525 | } |
| 526 | |
| 527 | lba_offset = short_pack(data[7], data[6]); |
| 528 | lba_offset = (lba_offset & 0x07FF) >> 1; |
| 529 | lba_real = lba_offset + zone_base_lba; |
| 530 | |
| 531 | /* |
| 532 | * Every 1024 physical blocks ("zone"), the LBA numbers |
| 533 | * go back to zero, but are within a higher block of LBA's. |
| 534 | * Also, there is a maximum of 1000 LBA's per zone. |
| 535 | * In other words, in PBA 1024-2047 you will find LBA 0-999 |
| 536 | * which are really LBA 1000-1999. This allows for 24 bad |
| 537 | * or special physical blocks per zone. |
| 538 | */ |
| 539 | |
| 540 | if (lba_offset >= uzonesize) { |
| 541 | printk("alauda_read_map: Bad low LBA %d for block %d\n", |
| 542 | lba_real, blocknum); |
| 543 | continue; |
| 544 | } |
| 545 | |
| 546 | if (lba_to_pba[lba_offset] != UNDEF) { |
| 547 | printk("alauda_read_map: LBA %d seen for PBA %d and %d\n", |
| 548 | lba_real, lba_to_pba[lba_offset], blocknum); |
| 549 | continue; |
| 550 | } |
| 551 | |
| 552 | pba_to_lba[i] = lba_real; |
| 553 | lba_to_pba[lba_offset] = blocknum; |
| 554 | continue; |
| 555 | } |
| 556 | |
| 557 | MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba; |
| 558 | MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba; |
| 559 | result = 0; |
| 560 | goto out; |
| 561 | |
| 562 | error: |
| 563 | kfree(lba_to_pba); |
| 564 | kfree(pba_to_lba); |
| 565 | out: |
| 566 | return result; |
| 567 | } |
| 568 | |
| 569 | /* |
| 570 | * Checks to see whether we have already mapped a certain zone |
| 571 | * If we haven't, the map is generated |
| 572 | */ |
| 573 | static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone) |
| 574 | { |
| 575 | if (MEDIA_INFO(us).lba_to_pba[zone] == NULL |
| 576 | || MEDIA_INFO(us).pba_to_lba[zone] == NULL) |
| 577 | alauda_read_map(us, zone); |
| 578 | } |
| 579 | |
| 580 | /* |
| 581 | * Erases an entire block |
| 582 | */ |
| 583 | static int alauda_erase_block(struct us_data *us, u16 pba) |
| 584 | { |
| 585 | int rc; |
| 586 | unsigned char command[] = { |
| 587 | ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba), |
| 588 | PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us) |
| 589 | }; |
| 590 | unsigned char buf[2]; |
| 591 | |
| 592 | US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba); |
| 593 | |
| 594 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| 595 | command, 9, NULL); |
| 596 | if (rc != USB_STOR_XFER_GOOD) |
| 597 | return rc; |
| 598 | |
| 599 | rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| 600 | buf, 2, NULL); |
| 601 | if (rc != USB_STOR_XFER_GOOD) |
| 602 | return rc; |
| 603 | |
| 604 | US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n", |
| 605 | buf[0], buf[1]); |
| 606 | return rc; |
| 607 | } |
| 608 | |
| 609 | /* |
| 610 | * Reads data from a certain offset page inside a PBA, including interleaved |
| 611 | * redundancy data. Returns (pagesize+64)*pages bytes in data. |
| 612 | */ |
| 613 | static int alauda_read_block_raw(struct us_data *us, u16 pba, |
| 614 | unsigned int page, unsigned int pages, unsigned char *data) |
| 615 | { |
| 616 | int rc; |
| 617 | unsigned char command[] = { |
| 618 | ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba), |
| 619 | PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us) |
| 620 | }; |
| 621 | |
| 622 | US_DEBUGP("alauda_read_block: pba %d page %d count %d\n", |
| 623 | pba, page, pages); |
| 624 | |
| 625 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| 626 | command, 9, NULL); |
| 627 | if (rc != USB_STOR_XFER_GOOD) |
| 628 | return rc; |
| 629 | |
| 630 | return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| 631 | data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL); |
| 632 | } |
| 633 | |
| 634 | /* |
| 635 | * Reads data from a certain offset page inside a PBA, excluding redundancy |
| 636 | * data. Returns pagesize*pages bytes in data. Note that data must be big enough |
| 637 | * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra' |
| 638 | * trailing bytes outside this function. |
| 639 | */ |
| 640 | static int alauda_read_block(struct us_data *us, u16 pba, |
| 641 | unsigned int page, unsigned int pages, unsigned char *data) |
| 642 | { |
| 643 | int i, rc; |
| 644 | unsigned int pagesize = MEDIA_INFO(us).pagesize; |
| 645 | |
| 646 | rc = alauda_read_block_raw(us, pba, page, pages, data); |
| 647 | if (rc != USB_STOR_XFER_GOOD) |
| 648 | return rc; |
| 649 | |
| 650 | /* Cut out the redundancy data */ |
| 651 | for (i = 0; i < pages; i++) { |
| 652 | int dest_offset = i * pagesize; |
| 653 | int src_offset = i * (pagesize + 64); |
| 654 | memmove(data + dest_offset, data + src_offset, pagesize); |
| 655 | } |
| 656 | |
| 657 | return rc; |
| 658 | } |
| 659 | |
| 660 | /* |
| 661 | * Writes an entire block of data and checks status after write. |
| 662 | * Redundancy data must be already included in data. Data should be |
| 663 | * (pagesize+64)*blocksize bytes in length. |
| 664 | */ |
| 665 | static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data) |
| 666 | { |
| 667 | int rc; |
| 668 | struct alauda_info *info = (struct alauda_info *) us->extra; |
| 669 | unsigned char command[] = { |
| 670 | ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba), |
| 671 | PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us) |
| 672 | }; |
| 673 | |
| 674 | US_DEBUGP("alauda_write_block: pba %d\n", pba); |
| 675 | |
| 676 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| 677 | command, 9, NULL); |
| 678 | if (rc != USB_STOR_XFER_GOOD) |
| 679 | return rc; |
| 680 | |
| 681 | rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data, |
| 682 | (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize, |
| 683 | NULL); |
| 684 | if (rc != USB_STOR_XFER_GOOD) |
| 685 | return rc; |
| 686 | |
| 687 | return alauda_check_status2(us); |
| 688 | } |
| 689 | |
| 690 | /* |
| 691 | * Write some data to a specific LBA. |
| 692 | */ |
| 693 | static int alauda_write_lba(struct us_data *us, u16 lba, |
| 694 | unsigned int page, unsigned int pages, |
| 695 | unsigned char *ptr, unsigned char *blockbuffer) |
| 696 | { |
| 697 | u16 pba, lbap, new_pba; |
| 698 | unsigned char *bptr, *cptr, *xptr; |
| 699 | unsigned char ecc[3]; |
| 700 | int i, result; |
| 701 | unsigned int uzonesize = MEDIA_INFO(us).uzonesize; |
| 702 | unsigned int zonesize = MEDIA_INFO(us).zonesize; |
| 703 | unsigned int pagesize = MEDIA_INFO(us).pagesize; |
| 704 | unsigned int blocksize = MEDIA_INFO(us).blocksize; |
| 705 | unsigned int lba_offset = lba % uzonesize; |
| 706 | unsigned int new_pba_offset; |
| 707 | unsigned int zone = lba / uzonesize; |
| 708 | |
| 709 | alauda_ensure_map_for_zone(us, zone); |
| 710 | |
| 711 | pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; |
| 712 | if (pba == 1) { |
| 713 | /* Maybe it is impossible to write to PBA 1. |
| 714 | Fake success, but don't do anything. */ |
| 715 | printk("alauda_write_lba: avoid writing to pba 1\n"); |
| 716 | return USB_STOR_TRANSPORT_GOOD; |
| 717 | } |
| 718 | |
| 719 | new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone); |
| 720 | if (!new_pba) { |
| 721 | printk("alauda_write_lba: Out of unused blocks\n"); |
| 722 | return USB_STOR_TRANSPORT_ERROR; |
| 723 | } |
| 724 | |
| 725 | /* read old contents */ |
| 726 | if (pba != UNDEF) { |
| 727 | result = alauda_read_block_raw(us, pba, 0, |
| 728 | blocksize, blockbuffer); |
| 729 | if (result != USB_STOR_XFER_GOOD) |
| 730 | return result; |
| 731 | } else { |
| 732 | memset(blockbuffer, 0, blocksize * (pagesize + 64)); |
| 733 | } |
| 734 | |
| 735 | lbap = (lba_offset << 1) | 0x1000; |
| 736 | if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) |
| 737 | lbap ^= 1; |
| 738 | |
| 739 | /* check old contents and fill lba */ |
| 740 | for (i = 0; i < blocksize; i++) { |
| 741 | bptr = blockbuffer + (i * (pagesize + 64)); |
| 742 | cptr = bptr + pagesize; |
| 743 | nand_compute_ecc(bptr, ecc); |
| 744 | if (!nand_compare_ecc(cptr+13, ecc)) { |
| 745 | US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", |
| 746 | i, pba); |
| 747 | nand_store_ecc(cptr+13, ecc); |
| 748 | } |
| 749 | nand_compute_ecc(bptr + (pagesize / 2), ecc); |
| 750 | if (!nand_compare_ecc(cptr+8, ecc)) { |
| 751 | US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", |
| 752 | i, pba); |
| 753 | nand_store_ecc(cptr+8, ecc); |
| 754 | } |
| 755 | cptr[6] = cptr[11] = MSB_of(lbap); |
| 756 | cptr[7] = cptr[12] = LSB_of(lbap); |
| 757 | } |
| 758 | |
| 759 | /* copy in new stuff and compute ECC */ |
| 760 | xptr = ptr; |
| 761 | for (i = page; i < page+pages; i++) { |
| 762 | bptr = blockbuffer + (i * (pagesize + 64)); |
| 763 | cptr = bptr + pagesize; |
| 764 | memcpy(bptr, xptr, pagesize); |
| 765 | xptr += pagesize; |
| 766 | nand_compute_ecc(bptr, ecc); |
| 767 | nand_store_ecc(cptr+13, ecc); |
| 768 | nand_compute_ecc(bptr + (pagesize / 2), ecc); |
| 769 | nand_store_ecc(cptr+8, ecc); |
| 770 | } |
| 771 | |
| 772 | result = alauda_write_block(us, new_pba, blockbuffer); |
| 773 | if (result != USB_STOR_XFER_GOOD) |
| 774 | return result; |
| 775 | |
| 776 | new_pba_offset = new_pba - (zone * zonesize); |
| 777 | MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba; |
| 778 | MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba; |
| 779 | US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n", |
| 780 | lba, new_pba); |
| 781 | |
| 782 | if (pba != UNDEF) { |
| 783 | unsigned int pba_offset = pba - (zone * zonesize); |
| 784 | result = alauda_erase_block(us, pba); |
| 785 | if (result != USB_STOR_XFER_GOOD) |
| 786 | return result; |
| 787 | MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF; |
| 788 | } |
| 789 | |
| 790 | return USB_STOR_TRANSPORT_GOOD; |
| 791 | } |
| 792 | |
| 793 | /* |
| 794 | * Read data from a specific sector address |
| 795 | */ |
| 796 | static int alauda_read_data(struct us_data *us, unsigned long address, |
| 797 | unsigned int sectors) |
| 798 | { |
| 799 | unsigned char *buffer; |
| 800 | u16 lba, max_lba; |
Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 801 | unsigned int page, len, offset; |
Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 802 | unsigned int blockshift = MEDIA_INFO(us).blockshift; |
| 803 | unsigned int pageshift = MEDIA_INFO(us).pageshift; |
| 804 | unsigned int blocksize = MEDIA_INFO(us).blocksize; |
| 805 | unsigned int pagesize = MEDIA_INFO(us).pagesize; |
| 806 | unsigned int uzonesize = MEDIA_INFO(us).uzonesize; |
Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 807 | struct scatterlist *sg; |
Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 808 | int result; |
| 809 | |
| 810 | /* |
| 811 | * Since we only read in one block at a time, we have to create |
| 812 | * a bounce buffer and move the data a piece at a time between the |
| 813 | * bounce buffer and the actual transfer buffer. |
| 814 | * We make this buffer big enough to hold temporary redundancy data, |
| 815 | * which we use when reading the data blocks. |
| 816 | */ |
| 817 | |
| 818 | len = min(sectors, blocksize) * (pagesize + 64); |
| 819 | buffer = kmalloc(len, GFP_NOIO); |
| 820 | if (buffer == NULL) { |
| 821 | printk("alauda_read_data: Out of memory\n"); |
| 822 | return USB_STOR_TRANSPORT_ERROR; |
| 823 | } |
| 824 | |
| 825 | /* Figure out the initial LBA and page */ |
| 826 | lba = address >> blockshift; |
| 827 | page = (address & MEDIA_INFO(us).blockmask); |
| 828 | max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift); |
| 829 | |
| 830 | result = USB_STOR_TRANSPORT_GOOD; |
Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 831 | offset = 0; |
| 832 | sg = NULL; |
Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 833 | |
| 834 | while (sectors > 0) { |
| 835 | unsigned int zone = lba / uzonesize; /* integer division */ |
| 836 | unsigned int lba_offset = lba - (zone * uzonesize); |
| 837 | unsigned int pages; |
| 838 | u16 pba; |
| 839 | alauda_ensure_map_for_zone(us, zone); |
| 840 | |
| 841 | /* Not overflowing capacity? */ |
| 842 | if (lba >= max_lba) { |
| 843 | US_DEBUGP("Error: Requested lba %u exceeds " |
| 844 | "maximum %u\n", lba, max_lba); |
| 845 | result = USB_STOR_TRANSPORT_ERROR; |
| 846 | break; |
| 847 | } |
| 848 | |
| 849 | /* Find number of pages we can read in this block */ |
| 850 | pages = min(sectors, blocksize - page); |
| 851 | len = pages << pageshift; |
| 852 | |
| 853 | /* Find where this lba lives on disk */ |
| 854 | pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; |
| 855 | |
| 856 | if (pba == UNDEF) { /* this lba was never written */ |
| 857 | US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", |
| 858 | pages, lba, page); |
| 859 | |
| 860 | /* This is not really an error. It just means |
| 861 | that the block has never been written. |
| 862 | Instead of returning USB_STOR_TRANSPORT_ERROR |
| 863 | it is better to return all zero data. */ |
| 864 | |
| 865 | memset(buffer, 0, len); |
| 866 | } else { |
| 867 | US_DEBUGP("Read %d pages, from PBA %d" |
| 868 | " (LBA %d) page %d\n", |
| 869 | pages, pba, lba, page); |
| 870 | |
| 871 | result = alauda_read_block(us, pba, page, pages, buffer); |
| 872 | if (result != USB_STOR_TRANSPORT_GOOD) |
| 873 | break; |
| 874 | } |
| 875 | |
| 876 | /* Store the data in the transfer buffer */ |
| 877 | usb_stor_access_xfer_buf(buffer, len, us->srb, |
Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 878 | &sg, &offset, TO_XFER_BUF); |
Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 879 | |
| 880 | page = 0; |
| 881 | lba++; |
| 882 | sectors -= pages; |
| 883 | } |
| 884 | |
| 885 | kfree(buffer); |
| 886 | return result; |
| 887 | } |
| 888 | |
| 889 | /* |
| 890 | * Write data to a specific sector address |
| 891 | */ |
| 892 | static int alauda_write_data(struct us_data *us, unsigned long address, |
| 893 | unsigned int sectors) |
| 894 | { |
| 895 | unsigned char *buffer, *blockbuffer; |
Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 896 | unsigned int page, len, offset; |
Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 897 | unsigned int blockshift = MEDIA_INFO(us).blockshift; |
| 898 | unsigned int pageshift = MEDIA_INFO(us).pageshift; |
| 899 | unsigned int blocksize = MEDIA_INFO(us).blocksize; |
| 900 | unsigned int pagesize = MEDIA_INFO(us).pagesize; |
Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 901 | struct scatterlist *sg; |
Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 902 | u16 lba, max_lba; |
| 903 | int result; |
| 904 | |
| 905 | /* |
| 906 | * Since we don't write the user data directly to the device, |
| 907 | * we have to create a bounce buffer and move the data a piece |
| 908 | * at a time between the bounce buffer and the actual transfer buffer. |
| 909 | */ |
| 910 | |
| 911 | len = min(sectors, blocksize) * pagesize; |
| 912 | buffer = kmalloc(len, GFP_NOIO); |
| 913 | if (buffer == NULL) { |
| 914 | printk("alauda_write_data: Out of memory\n"); |
| 915 | return USB_STOR_TRANSPORT_ERROR; |
| 916 | } |
| 917 | |
| 918 | /* |
| 919 | * We also need a temporary block buffer, where we read in the old data, |
| 920 | * overwrite parts with the new data, and manipulate the redundancy data |
| 921 | */ |
| 922 | blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO); |
| 923 | if (blockbuffer == NULL) { |
| 924 | printk("alauda_write_data: Out of memory\n"); |
| 925 | kfree(buffer); |
| 926 | return USB_STOR_TRANSPORT_ERROR; |
| 927 | } |
| 928 | |
| 929 | /* Figure out the initial LBA and page */ |
| 930 | lba = address >> blockshift; |
| 931 | page = (address & MEDIA_INFO(us).blockmask); |
| 932 | max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift); |
| 933 | |
| 934 | result = USB_STOR_TRANSPORT_GOOD; |
Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 935 | offset = 0; |
| 936 | sg = NULL; |
Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 937 | |
| 938 | while (sectors > 0) { |
| 939 | /* Write as many sectors as possible in this block */ |
| 940 | unsigned int pages = min(sectors, blocksize - page); |
| 941 | len = pages << pageshift; |
| 942 | |
| 943 | /* Not overflowing capacity? */ |
| 944 | if (lba >= max_lba) { |
| 945 | US_DEBUGP("alauda_write_data: Requested lba %u exceeds " |
| 946 | "maximum %u\n", lba, max_lba); |
| 947 | result = USB_STOR_TRANSPORT_ERROR; |
| 948 | break; |
| 949 | } |
| 950 | |
| 951 | /* Get the data from the transfer buffer */ |
| 952 | usb_stor_access_xfer_buf(buffer, len, us->srb, |
Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 953 | &sg, &offset, FROM_XFER_BUF); |
Matthew Dharm | e80b0fa | 2005-12-04 22:02:44 -0800 | [diff] [blame] | 954 | |
| 955 | result = alauda_write_lba(us, lba, page, pages, buffer, |
| 956 | blockbuffer); |
| 957 | if (result != USB_STOR_TRANSPORT_GOOD) |
| 958 | break; |
| 959 | |
| 960 | page = 0; |
| 961 | lba++; |
| 962 | sectors -= pages; |
| 963 | } |
| 964 | |
| 965 | kfree(buffer); |
| 966 | kfree(blockbuffer); |
| 967 | return result; |
| 968 | } |
| 969 | |
| 970 | /* |
| 971 | * Our interface with the rest of the world |
| 972 | */ |
| 973 | |
| 974 | static void alauda_info_destructor(void *extra) |
| 975 | { |
| 976 | struct alauda_info *info = (struct alauda_info *) extra; |
| 977 | int port; |
| 978 | |
| 979 | if (!info) |
| 980 | return; |
| 981 | |
| 982 | for (port = 0; port < 2; port++) { |
| 983 | struct alauda_media_info *media_info = &info->port[port]; |
| 984 | |
| 985 | alauda_free_maps(media_info); |
| 986 | kfree(media_info->lba_to_pba); |
| 987 | kfree(media_info->pba_to_lba); |
| 988 | } |
| 989 | } |
| 990 | |
| 991 | /* |
| 992 | * Initialize alauda_info struct and find the data-write endpoint |
| 993 | */ |
| 994 | int init_alauda(struct us_data *us) |
| 995 | { |
| 996 | struct alauda_info *info; |
| 997 | struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting; |
| 998 | nand_init_ecc(); |
| 999 | |
| 1000 | us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO); |
| 1001 | if (!us->extra) { |
| 1002 | US_DEBUGP("init_alauda: Gah! Can't allocate storage for" |
| 1003 | "alauda info struct!\n"); |
| 1004 | return USB_STOR_TRANSPORT_ERROR; |
| 1005 | } |
| 1006 | info = (struct alauda_info *) us->extra; |
| 1007 | us->extra_destructor = alauda_info_destructor; |
| 1008 | |
| 1009 | info->wr_ep = usb_sndbulkpipe(us->pusb_dev, |
| 1010 | altsetting->endpoint[0].desc.bEndpointAddress |
| 1011 | & USB_ENDPOINT_NUMBER_MASK); |
| 1012 | |
| 1013 | return USB_STOR_TRANSPORT_GOOD; |
| 1014 | } |
| 1015 | |
| 1016 | int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) |
| 1017 | { |
| 1018 | int rc; |
| 1019 | struct alauda_info *info = (struct alauda_info *) us->extra; |
| 1020 | unsigned char *ptr = us->iobuf; |
| 1021 | static unsigned char inquiry_response[36] = { |
| 1022 | 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 |
| 1023 | }; |
| 1024 | |
| 1025 | if (srb->cmnd[0] == INQUIRY) { |
| 1026 | US_DEBUGP("alauda_transport: INQUIRY. " |
| 1027 | "Returning bogus response.\n"); |
| 1028 | memcpy(ptr, inquiry_response, sizeof(inquiry_response)); |
| 1029 | fill_inquiry_response(us, ptr, 36); |
| 1030 | return USB_STOR_TRANSPORT_GOOD; |
| 1031 | } |
| 1032 | |
| 1033 | if (srb->cmnd[0] == TEST_UNIT_READY) { |
| 1034 | US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n"); |
| 1035 | return alauda_check_media(us); |
| 1036 | } |
| 1037 | |
| 1038 | if (srb->cmnd[0] == READ_CAPACITY) { |
| 1039 | unsigned int num_zones; |
| 1040 | unsigned long capacity; |
| 1041 | |
| 1042 | rc = alauda_check_media(us); |
| 1043 | if (rc != USB_STOR_TRANSPORT_GOOD) |
| 1044 | return rc; |
| 1045 | |
| 1046 | num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift |
| 1047 | + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); |
| 1048 | |
| 1049 | capacity = num_zones * MEDIA_INFO(us).uzonesize |
| 1050 | * MEDIA_INFO(us).blocksize; |
| 1051 | |
| 1052 | /* Report capacity and page size */ |
| 1053 | ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1); |
| 1054 | ((__be32 *) ptr)[1] = cpu_to_be32(512); |
| 1055 | |
| 1056 | usb_stor_set_xfer_buf(ptr, 8, srb); |
| 1057 | return USB_STOR_TRANSPORT_GOOD; |
| 1058 | } |
| 1059 | |
| 1060 | if (srb->cmnd[0] == READ_10) { |
| 1061 | unsigned int page, pages; |
| 1062 | |
| 1063 | rc = alauda_check_media(us); |
| 1064 | if (rc != USB_STOR_TRANSPORT_GOOD) |
| 1065 | return rc; |
| 1066 | |
| 1067 | page = short_pack(srb->cmnd[3], srb->cmnd[2]); |
| 1068 | page <<= 16; |
| 1069 | page |= short_pack(srb->cmnd[5], srb->cmnd[4]); |
| 1070 | pages = short_pack(srb->cmnd[8], srb->cmnd[7]); |
| 1071 | |
| 1072 | US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n", |
| 1073 | page, pages); |
| 1074 | |
| 1075 | return alauda_read_data(us, page, pages); |
| 1076 | } |
| 1077 | |
| 1078 | if (srb->cmnd[0] == WRITE_10) { |
| 1079 | unsigned int page, pages; |
| 1080 | |
| 1081 | rc = alauda_check_media(us); |
| 1082 | if (rc != USB_STOR_TRANSPORT_GOOD) |
| 1083 | return rc; |
| 1084 | |
| 1085 | page = short_pack(srb->cmnd[3], srb->cmnd[2]); |
| 1086 | page <<= 16; |
| 1087 | page |= short_pack(srb->cmnd[5], srb->cmnd[4]); |
| 1088 | pages = short_pack(srb->cmnd[8], srb->cmnd[7]); |
| 1089 | |
| 1090 | US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n", |
| 1091 | page, pages); |
| 1092 | |
| 1093 | return alauda_write_data(us, page, pages); |
| 1094 | } |
| 1095 | |
| 1096 | if (srb->cmnd[0] == REQUEST_SENSE) { |
| 1097 | US_DEBUGP("alauda_transport: REQUEST_SENSE.\n"); |
| 1098 | |
| 1099 | memset(ptr, 0, 18); |
| 1100 | ptr[0] = 0xF0; |
| 1101 | ptr[2] = info->sense_key; |
| 1102 | ptr[7] = 11; |
| 1103 | ptr[12] = info->sense_asc; |
| 1104 | ptr[13] = info->sense_ascq; |
| 1105 | usb_stor_set_xfer_buf(ptr, 18, srb); |
| 1106 | |
| 1107 | return USB_STOR_TRANSPORT_GOOD; |
| 1108 | } |
| 1109 | |
| 1110 | if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { |
| 1111 | /* sure. whatever. not like we can stop the user from popping |
| 1112 | the media out of the device (no locking doors, etc) */ |
| 1113 | return USB_STOR_TRANSPORT_GOOD; |
| 1114 | } |
| 1115 | |
| 1116 | US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n", |
| 1117 | srb->cmnd[0], srb->cmnd[0]); |
| 1118 | info->sense_key = 0x05; |
| 1119 | info->sense_asc = 0x20; |
| 1120 | info->sense_ascq = 0x00; |
| 1121 | return USB_STOR_TRANSPORT_FAILED; |
| 1122 | } |
| 1123 | |