blob: 615874e03ce8bbad26eab9f992b5a43632a02071 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
6
7config FB
8 tristate "Support for frame buffer devices"
9 ---help---
10 The frame buffer device provides an abstraction for the graphics
11 hardware. It represents the frame buffer of some video hardware and
12 allows application software to access the graphics hardware through
13 a well-defined interface, so the software doesn't need to know
14 anything about the low-level (hardware register) stuff.
15
16 Frame buffer devices work identically across the different
17 architectures supported by Linux and make the implementation of
18 application programs easier and more portable; at this point, an X
19 server exists which uses the frame buffer device exclusively.
20 On several non-X86 architectures, the frame buffer device is the
21 only way to use the graphics hardware.
22
23 The device is accessed through special device nodes, usually located
24 in the /dev directory, i.e. /dev/fb*.
25
26 You need an utility program called fbset to make full use of frame
27 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
28 and the Framebuffer-HOWTO at
29 <http://www.tahallah.demon.co.uk/programming/prog.html> for more
30 information.
31
32 Say Y here and to the driver for your graphics board below if you
33 are compiling a kernel for a non-x86 architecture.
34
35 If you are compiling for the x86 architecture, you can say Y if you
36 want to play with it, but it is not essential. Please note that
37 running graphical applications that directly touch the hardware
38 (e.g. an accelerated X server) and that are not frame buffer
39 device-aware may cause unexpected results. If unsure, say N.
40
41config FB_CFB_FILLRECT
42 tristate
43 depends on FB
44 default n
45 ---help---
46 Include the cfb_fillrect function for generic software rectangle
47 filling. This is used by drivers that don't provide their own
48 (accelerated) version.
49
50config FB_CFB_COPYAREA
51 tristate
52 depends on FB
53 default n
54 ---help---
55 Include the cfb_copyarea function for generic software area copying.
56 This is used by drivers that don't provide their own (accelerated)
57 version.
58
59config FB_CFB_IMAGEBLIT
60 tristate
61 depends on FB
62 default n
63 ---help---
64 Include the cfb_imageblit function for generic software image
65 blitting. This is used by drivers that don't provide their own
66 (accelerated) version.
67
68config FB_SOFT_CURSOR
69 tristate
70 depends on FB
71 default n
72 ---help---
73 Include the soft_cursor function for generic software cursor support.
74 This is used by drivers that don't provide their own (accelerated)
75 version.
76
77config FB_MACMODES
78 tristate
79 depends on FB
80 default n
81
82config FB_MODE_HELPERS
83 bool "Enable Video Mode Handling Helpers"
84 depends on FB
85 default n
86 ---help---
87 This enables functions for handling video modes using the
88 Generalized Timing Formula and the EDID parser. A few drivers rely
89 on this feature such as the radeonfb, rivafb, and the i810fb. If
90 your driver does not take advantage of this feature, choosing Y will
91 just increase the kernel size by about 5K.
92
93config FB_TILEBLITTING
94 bool "Enable Tile Blitting Support"
95 depends on FB
96 default n
97 ---help---
98 This enables tile blitting. Tile blitting is a drawing technique
99 where the screen is divided into rectangular sections (tiles), whereas
100 the standard blitting divides the screen into pixels. Because the
101 default drawing element is a tile, drawing functions will be passed
102 parameters in terms of number of tiles instead of number of pixels.
103 For example, to draw a single character, instead of using bitmaps,
104 an index to an array of bitmaps will be used. To clear or move a
105 rectangular section of a screen, the rectangle will be described in
106 terms of number of tiles in the x- and y-axis.
107
108 This is particularly important to one driver, matroxfb. If
109 unsure, say N.
110
111config FB_CIRRUS
112 tristate "Cirrus Logic support"
113 depends on FB && (ZORRO || PCI)
114 select FB_CFB_FILLRECT
115 select FB_CFB_COPYAREA
116 select FB_CFB_IMAGEBLIT
117 select FB_SOFT_CURSOR
118 ---help---
119 This enables support for Cirrus Logic GD542x/543x based boards on
120 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
121
122 If you have a PCI-based system, this enables support for these
123 chips: GD-543x, GD-544x, GD-5480.
124
125 Please read the file <file:Documentation/fb/cirrusfb.txt>.
126
127 Say N unless you have such a graphics board or plan to get one
128 before you next recompile the kernel.
129
130config FB_PM2
131 tristate "Permedia2 support"
132 depends on FB && ((AMIGA && BROKEN) || PCI)
133 select FB_CFB_FILLRECT
134 select FB_CFB_COPYAREA
135 select FB_CFB_IMAGEBLIT
136 select FB_SOFT_CURSOR
137 help
138 This is the frame buffer device driver for the Permedia2 AGP frame
139 buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
140 product page at
141 <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
142
143config FB_PM2_FIFO_DISCONNECT
144 bool "enable FIFO disconnect feature"
145 depends on FB_PM2 && PCI
146 help
147 Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
148
149config FB_ARMCLCD
150 tristate "ARM PrimeCell PL110 support"
151 depends on FB && ARM && ARM_AMBA
152 select FB_CFB_FILLRECT
153 select FB_CFB_COPYAREA
154 select FB_CFB_IMAGEBLIT
155 select FB_SOFT_CURSOR
156 help
157 This framebuffer device driver is for the ARM PrimeCell PL110
158 Colour LCD controller. ARM PrimeCells provide the building
159 blocks for System on a Chip devices.
160
161 If you want to compile this as a module (=code which can be
162 inserted into and removed from the running kernel), say M
163 here and read <file:Documentation/modules.txt>. The module
164 will be called amba-clcd.
165
166config FB_ACORN
167 bool "Acorn VIDC support"
168 depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
169 select FB_CFB_FILLRECT
170 select FB_CFB_COPYAREA
171 select FB_CFB_IMAGEBLIT
172 select FB_SOFT_CURSOR
173 help
174 This is the frame buffer device driver for the Acorn VIDC graphics
175 hardware found in Acorn RISC PCs and other ARM-based machines. If
176 unsure, say N.
177
178config FB_CLPS711X
179 bool "CLPS711X LCD support"
180 depends on (FB = y) && ARM && ARCH_CLPS711X
181 select FB_CFB_FILLRECT
182 select FB_CFB_COPYAREA
183 select FB_CFB_IMAGEBLIT
184 select FB_SOFT_CURSOR
185
186config FB_SA1100
187 bool "SA-1100 LCD support"
188 depends on (FB = y) && ARM && ARCH_SA1100
189 select FB_CFB_FILLRECT
190 select FB_CFB_COPYAREA
191 select FB_CFB_IMAGEBLIT
192 select FB_SOFT_CURSOR
193 help
194 This is a framebuffer device for the SA-1100 LCD Controller.
195 See <http://www.linux-fbdev.org/> for information on framebuffer
196 devices.
197
198 If you plan to use the LCD display with your SA-1100 system, say
199 Y here.
200
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700201config FB_IMX
202 tristate "Motorola i.MX LCD support"
203 depends on FB && ARM && ARCH_IMX
204 select FB_CFB_FILLRECT
205 select FB_CFB_COPYAREA
206 select FB_CFB_IMAGEBLIT
207 select FB_SOFT_CURSOR
208
Linus Torvalds1da177e2005-04-16 15:20:36 -0700209config FB_CYBER2000
210 tristate "CyberPro 2000/2010/5000 support"
211 depends on FB && PCI && (BROKEN || !SPARC64)
212 select FB_CFB_FILLRECT
213 select FB_CFB_COPYAREA
214 select FB_CFB_IMAGEBLIT
215 select FB_SOFT_CURSOR
216 help
217 This enables support for the Integraphics CyberPro 20x0 and 5000
218 VGA chips used in the Rebel.com Netwinder and other machines.
219 Say Y if you have a NetWinder or a graphics card containing this
220 device, otherwise say N.
221
222config FB_APOLLO
223 bool
224 depends on (FB = y) && APOLLO
225 default y
226 select FB_CFB_FILLRECT
227 select FB_CFB_IMAGEBLIT
228 select FB_SOFT_CURSOR
229
230config FB_Q40
231 bool
232 depends on (FB = y) && Q40
233 default y
234 select FB_CFB_FILLRECT
235 select FB_CFB_COPYAREA
236 select FB_CFB_IMAGEBLIT
237 select FB_SOFT_CURSOR
238
239config FB_AMIGA
240 tristate "Amiga native chipset support"
241 depends on FB && AMIGA
242 select FB_SOFT_CURSOR
243 help
244 This is the frame buffer device driver for the builtin graphics
245 chipset found in Amigas.
246
247 To compile this driver as a module, choose M here: the
248 module will be called amifb.
249
250config FB_AMIGA_OCS
251 bool "Amiga OCS chipset support"
252 depends on FB_AMIGA
253 help
254 This enables support for the original Agnus and Denise video chips,
255 found in the Amiga 1000 and most A500's and A2000's. If you intend
256 to run Linux on any of these systems, say Y; otherwise say N.
257
258config FB_AMIGA_ECS
259 bool "Amiga ECS chipset support"
260 depends on FB_AMIGA
261 help
262 This enables support for the Enhanced Chip Set, found in later
263 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
264 you intend to run Linux on any of these systems, say Y; otherwise
265 say N.
266
267config FB_AMIGA_AGA
268 bool "Amiga AGA chipset support"
269 depends on FB_AMIGA
270 help
271 This enables support for the Advanced Graphics Architecture (also
272 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
273 and CD32. If you intend to run Linux on any of these systems, say Y;
274 otherwise say N.
275
276config FB_CYBER
277 tristate "Amiga CyberVision 64 support"
278 depends on FB && ZORRO && BROKEN
279 select FB_CFB_FILLRECT
280 select FB_CFB_COPYAREA
281 select FB_CFB_IMAGEBLIT
282 select FB_SOFT_CURSOR
283 help
284 This enables support for the Cybervision 64 graphics card from
285 Phase5. Please note that its use is not all that intuitive (i.e. if
286 you have any questions, be sure to ask!). Say N unless you have a
287 Cybervision 64 or plan to get one before you next recompile the
288 kernel. Please note that this driver DOES NOT support the
289 Cybervision 64/3D card, as they use incompatible video chips.
290
291config FB_VIRGE
292 bool "Amiga CyberVision 64/3D support "
293 depends on (FB = y) && ZORRO && BROKEN
294 select FB_CFB_FILLRECT
295 select FB_CFB_COPYAREA
296 select FB_CFB_IMAGEBLIT
297 select FB_SOFT_CURSOR
298 help
299 This enables support for the Cybervision 64/3D graphics card from
300 Phase5. Please note that its use is not all that intuitive (i.e. if
301 you have any questions, be sure to ask!). Say N unless you have a
302 Cybervision 64/3D or plan to get one before you next recompile the
303 kernel. Please note that this driver DOES NOT support the older
304 Cybervision 64 card, as they use incompatible video chips.
305
306config FB_RETINAZ3
307 tristate "Amiga Retina Z3 support"
308 depends on (FB = y) && ZORRO && BROKEN
309 help
310 This enables support for the Retina Z3 graphics card. Say N unless
311 you have a Retina Z3 or plan to get one before you next recompile
312 the kernel.
313
314config FB_FM2
315 bool "Amiga FrameMaster II/Rainbow II support"
316 depends on (FB = y) && ZORRO
317 select FB_CFB_FILLRECT
318 select FB_CFB_COPYAREA
319 select FB_CFB_IMAGEBLIT
320 select FB_SOFT_CURSOR
321 help
322 This is the frame buffer device driver for the Amiga FrameMaster
323 card from BSC (exhibited 1992 but not shipped as a CBM product).
324
Jaya Kumar1154ea72005-06-21 17:17:04 -0700325config FB_ARC
326 tristate "Arc Monochrome LCD board support"
327 depends on FB && X86
328 select FB_CFB_FILLRECT
329 select FB_CFB_COPYAREA
330 select FB_CFB_IMAGEBLIT
331 select FB_SOFT_CURSOR
332 help
333 This enables support for the Arc Monochrome LCD board. The board
334 is based on the KS-108 lcd controller and is typically a matrix
335 of 2*n chips. This driver was tested with a 128x64 panel. This
336 driver supports it for use with x86 SBCs through a 16 bit GPIO
337 interface (8 bit data, 8 bit control). If you anticpate using
338 this driver, say Y or M; otherwise say N. You must specify the
339 GPIO IO address to be used for setting control and data.
340
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341config FB_ATARI
342 bool "Atari native chipset support"
343 depends on (FB = y) && ATARI && BROKEN
344 help
345 This is the frame buffer device driver for the builtin graphics
346 chipset found in Ataris.
347
348config FB_OF
349 bool "Open Firmware frame buffer device support"
350 depends on (FB = y) && (PPC64 || PPC_OF)
351 select FB_CFB_FILLRECT
352 select FB_CFB_COPYAREA
353 select FB_CFB_IMAGEBLIT
354 select FB_SOFT_CURSOR
355 select FB_MACMODES
356 help
357 Say Y if you want support with Open Firmware for your graphics
358 board.
359
360config FB_CONTROL
361 bool "Apple \"control\" display support"
362 depends on (FB = y) && PPC_PMAC
363 select FB_CFB_FILLRECT
364 select FB_CFB_COPYAREA
365 select FB_CFB_IMAGEBLIT
366 select FB_SOFT_CURSOR
367 select FB_MACMODES
368 help
369 This driver supports a frame buffer for the graphics adapter in the
370 Power Macintosh 7300 and others.
371
372config FB_PLATINUM
373 bool "Apple \"platinum\" display support"
374 depends on (FB = y) && PPC_PMAC
375 select FB_CFB_FILLRECT
376 select FB_CFB_COPYAREA
377 select FB_CFB_IMAGEBLIT
378 select FB_SOFT_CURSOR
379 select FB_MACMODES
380 help
381 This driver supports a frame buffer for the "platinum" graphics
382 adapter in some Power Macintoshes.
383
384config FB_VALKYRIE
385 bool "Apple \"valkyrie\" display support"
386 depends on (FB = y) && (MAC || PPC_PMAC)
387 select FB_CFB_FILLRECT
388 select FB_CFB_COPYAREA
389 select FB_CFB_IMAGEBLIT
390 select FB_SOFT_CURSOR
391 select FB_MACMODES
392 help
393 This driver supports a frame buffer for the "valkyrie" graphics
394 adapter in some Power Macintoshes.
395
396config FB_CT65550
397 bool "Chips 65550 display support"
398 depends on (FB = y) && PPC
399 select FB_CFB_FILLRECT
400 select FB_CFB_COPYAREA
401 select FB_CFB_IMAGEBLIT
402 select FB_SOFT_CURSOR
403 help
404 This is the frame buffer device driver for the Chips & Technologies
405 65550 graphics chip in PowerBooks.
406
407config FB_ASILIANT
408 bool "Chips 69000 display support"
409 depends on (FB = y) && PCI
410 select FB_CFB_FILLRECT
411 select FB_CFB_COPYAREA
412 select FB_CFB_IMAGEBLIT
413 select FB_SOFT_CURSOR
414
415config FB_IMSTT
416 bool "IMS Twin Turbo display support"
417 depends on (FB = y) && PCI
418 select FB_CFB_IMAGEBLIT
419 select FB_SOFT_CURSOR
420 select FB_MACMODES if PPC
421 help
422 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
423 many Macintosh and compatible computers.
424
425config FB_S3TRIO
426 bool "S3 Trio display support"
427 depends on (FB = y) && PPC && BROKEN
428 help
429 If you have a S3 Trio say Y. Say N for S3 Virge.
430
431config FB_VGA16
432 tristate "VGA 16-color graphics support"
433 depends on FB && (X86 || PPC)
434 select FB_CFB_FILLRECT
435 select FB_CFB_COPYAREA
436 select FB_CFB_IMAGEBLIT
437 select FB_SOFT_CURSOR
438 help
439 This is the frame buffer device driver for VGA 16 color graphic
440 cards. Say Y if you have such a card.
441
442 To compile this driver as a module, choose M here: the
443 module will be called vga16fb.
444
445config FB_STI
446 tristate "HP STI frame buffer device support"
447 depends on FB && PARISC
448 select FB_CFB_FILLRECT
449 select FB_CFB_COPYAREA
450 select FB_CFB_IMAGEBLIT
451 select FB_SOFT_CURSOR
452 default y
453 ---help---
454 STI refers to the HP "Standard Text Interface" which is a set of
455 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
456 Enabling this option will implement the linux framebuffer device
457 using calls to the STI BIOS routines for initialisation.
458
459 If you enable this option, you will get a planar framebuffer device
460 /dev/fb which will work on the most common HP graphic cards of the
461 NGLE family, including the artist chips (in the 7xx and Bxxx series),
462 HCRX, HCRX24, CRX, CRX24 and VisEG series.
463
464 It is safe to enable this option, so you should probably say "Y".
465
466config FB_MAC
467 bool "Generic Macintosh display support"
468 depends on (FB = y) && MAC
469 select FB_CFB_FILLRECT
470 select FB_CFB_COPYAREA
471 select FB_CFB_IMAGEBLIT
472 select FB_SOFT_CURSOR
473 select FB_MACMODES
474
475# bool ' Apple DAFB display support' CONFIG_FB_DAFB
476config FB_HP300
477 bool
478 depends on (FB = y) && HP300
479 select FB_CFB_FILLRECT
480 select FB_CFB_IMAGEBLIT
481 select FB_SOFT_CURSOR
482 default y
483
484config FB_TGA
485 tristate "TGA framebuffer support"
486 depends on FB && ALPHA
487 select FB_CFB_FILLRECT
488 select FB_CFB_COPYAREA
489 select FB_CFB_IMAGEBLIT
490 select FB_SOFT_CURSOR
491 help
492 This is the frame buffer device driver for generic TGA graphic
493 cards. Say Y if you have one of those.
494
495config FB_VESA
496 bool "VESA VGA graphics support"
497 depends on (FB = y) && (X86 || X86_64)
498 select FB_CFB_FILLRECT
499 select FB_CFB_COPYAREA
500 select FB_CFB_IMAGEBLIT
501 select FB_SOFT_CURSOR
502 help
503 This is the frame buffer device driver for generic VESA 2.0
504 compliant graphic cards. The older VESA 1.2 cards are not supported.
505 You will get a boot time penguin logo at no additional cost. Please
506 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
507
508config VIDEO_SELECT
509 bool
510 depends on FB_VESA
511 default y
512
513config FB_HGA
514 tristate "Hercules mono graphics support"
515 depends on FB && X86
516 select FB_CFB_FILLRECT
517 select FB_CFB_COPYAREA
518 select FB_CFB_IMAGEBLIT
519 select FB_SOFT_CURSOR
520 help
521 Say Y here if you have a Hercules mono graphics card.
522
523 To compile this driver as a module, choose M here: the
524 module will be called hgafb.
525
526 As this card technology is 15 years old, most people will answer N
527 here.
528
529config FB_HGA_ACCEL
530 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
531 depends on FB_HGA && EXPERIMENTAL
532 ---help---
533 This will compile the Hercules mono graphics with
534 acceleration functions.
535
536
537config VIDEO_SELECT
538 bool
539 depends on (FB = y) && X86
540 default y
541
542config FB_SGIVW
543 tristate "SGI Visual Workstation framebuffer support"
544 depends on FB && X86_VISWS
545 select FB_CFB_FILLRECT
546 select FB_CFB_COPYAREA
547 select FB_CFB_IMAGEBLIT
548 select FB_SOFT_CURSOR
549 help
550 SGI Visual Workstation support for framebuffer graphics.
551
552config FB_GBE
553 bool "SGI Graphics Backend frame buffer support"
554 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
555 select FB_CFB_FILLRECT
556 select FB_CFB_COPYAREA
557 select FB_CFB_IMAGEBLIT
558 select FB_SOFT_CURSOR
559 help
560 This is the frame buffer device driver for SGI Graphics Backend.
561 This chip is used in SGI O2 and Visual Workstation 320/540.
562
563config FB_GBE_MEM
564 int "Video memory size in MB"
565 depends on FB_GBE
566 default 8
567 help
568 This is the amount of memory reserved for the framebuffer,
569 which can be any value between 1MB and 8MB.
570
571config BUS_I2C
572 bool
573 depends on (FB = y) && VISWS
574 default y
575
576config FB_SUN3
577 bool "Sun3 framebuffer support"
578 depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
579
580config FB_BW2
581 bool "BWtwo support"
582 depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
583 select FB_CFB_FILLRECT
584 select FB_CFB_COPYAREA
585 select FB_CFB_IMAGEBLIT
586 select FB_SOFT_CURSOR
587 help
588 This is the frame buffer device driver for the BWtwo frame buffer.
589
590config FB_CG3
591 bool "CGthree support"
592 depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
593 select FB_CFB_COPYAREA
594 select FB_CFB_IMAGEBLIT
595 select FB_SOFT_CURSOR
596 help
597 This is the frame buffer device driver for the CGthree frame buffer.
598
599config FB_CG6
600 bool "CGsix (GX,TurboGX) support"
601 depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
602 select FB_CFB_COPYAREA
603 select FB_CFB_IMAGEBLIT
604 select FB_SOFT_CURSOR
605 help
606 This is the frame buffer device driver for the CGsix (GX, TurboGX)
607 frame buffer.
608
609config FB_PVR2
610 tristate "NEC PowerVR 2 display support"
611 depends on FB && SH_DREAMCAST
612 select FB_CFB_FILLRECT
613 select FB_CFB_COPYAREA
614 select FB_CFB_IMAGEBLIT
615 select FB_SOFT_CURSOR
616 ---help---
617 Say Y here if you have a PowerVR 2 card in your box. If you plan to
618 run linux on your Dreamcast, you will have to say Y here.
619 This driver may or may not work on other PowerVR 2 cards, but is
620 totally untested. Use at your own risk. If unsure, say N.
621
622 To compile this driver as a module, choose M here: the
623 module will be called pvr2fb.
624
625 You can pass several parameters to the driver at boot time or at
626 module load time. The parameters look like "video=pvr2:XXX", where
627 the meaning of XXX can be found at the end of the main source file
628 (<file:drivers/video/pvr2fb.c>). Please see the file
629 <file:Documentation/fb/pvr2fb.txt>.
630
631config FB_EPSON1355
632 bool "Epson 1355 framebuffer support"
633 depends on (FB = y) && (SUPERH || ARCH_CEIVA)
634 select FB_CFB_FILLRECT
635 select FB_CFB_COPYAREA
636 select FB_CFB_IMAGEBLIT
637 select FB_SOFT_CURSOR
638 help
639 Build in support for the SED1355 Epson Research Embedded RAMDAC
640 LCD/CRT Controller (since redesignated as the S1D13505) as a
641 framebuffer. Product specs at
642 <http://www.erd.epson.com/vdc/html/products.htm>.
643
644config FB_NVIDIA
645 tristate "nVidia Framebuffer Support"
646 depends on FB && PCI
647 select I2C_ALGOBIT if FB_NVIDIA_I2C
648 select I2C if FB_NVIDIA_I2C
649 select FB_MODE_HELPERS
650 select FB_CFB_FILLRECT
651 select FB_CFB_COPYAREA
652 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700653 help
654 This driver supports graphics boards with the nVidia chips, TNT
655 and newer. For very old chipsets, such as the RIVA128, then use
656 the rivafb.
657 Say Y if you have such a graphics board.
658
659 To compile this driver as a module, choose M here: the
660 module will be called nvidiafb.
661
662config FB_NVIDIA_I2C
663 bool "Enable DDC Support"
664 depends on FB_NVIDIA && !PPC_OF
665 help
666 This enables I2C support for nVidia Chipsets. This is used
667 only for getting EDID information from the attached display
668 allowing for robust video mode handling and switching.
669
670 Because fbdev-2.6 requires that drivers must be able to
671 independently validate video mode parameters, you should say Y
672 here.
673
674config FB_RIVA
675 tristate "nVidia Riva support"
676 depends on FB && PCI
677 select I2C_ALGOBIT if FB_RIVA_I2C
678 select I2C if FB_RIVA_I2C
679 select FB_MODE_HELPERS
680 select FB_CFB_FILLRECT
681 select FB_CFB_COPYAREA
682 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700683 help
684 This driver supports graphics boards with the nVidia Riva/Geforce
685 chips.
686 Say Y if you have such a graphics board.
687
688 To compile this driver as a module, choose M here: the
689 module will be called rivafb.
690
691config FB_RIVA_I2C
692 bool "Enable DDC Support"
693 depends on FB_RIVA
694 help
695 This enables I2C support for nVidia Chipsets. This is used
696 only for getting EDID information from the attached display
697 allowing for robust video mode handling and switching.
698
699 Because fbdev-2.6 requires that drivers must be able to
700 independently validate video mode parameters, you should say Y
701 here.
702
703config FB_RIVA_DEBUG
704 bool "Lots of debug output from Riva(nVidia) driver"
705 depends on FB_RIVA
706 default n
707 help
708 Say Y here if you want the Riva driver to output all sorts
709 of debugging informations to provide to the maintainer when
710 something goes wrong.
711
712config FB_I810
713 tristate "Intel 810/815 support (EXPERIMENTAL)"
714 depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
715 select AGP
716 select AGP_INTEL
717 select FB_MODE_HELPERS
718 select FB_CFB_FILLRECT
719 select FB_CFB_COPYAREA
720 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700721 help
722 This driver supports the on-board graphics built in to the Intel 810
723 and 815 chipsets. Say Y if you have and plan to use such a board.
724
725 To compile this driver as a module, choose M here: the
726 module will be called i810fb.
727
728 For more information, please read
729 <file:Documentation/fb/intel810.txt>
730
731config FB_I810_GTF
732 bool "use VESA Generalized Timing Formula"
733 depends on FB_I810
734 help
735 If you say Y, then the VESA standard, Generalized Timing Formula
736 or GTF, will be used to calculate the required video timing values
737 per video mode. Since the GTF allows nondiscrete timings
738 (nondiscrete being a range of values as opposed to discrete being a
739 set of values), you'll be able to use any combination of horizontal
740 and vertical resolutions, and vertical refresh rates without having
741 to specify your own timing parameters. This is especially useful
742 to maximize the performance of an aging display, or if you just
743 have a display with nonstandard dimensions. A VESA compliant
744 monitor is recommended, but can still work with non-compliant ones.
745 If you need or want this, then select this option. The timings may
746 not be compliant with Intel's recommended values. Use at your own
747 risk.
748
749 If you say N, the driver will revert to discrete video timings
750 using a set recommended by Intel in their documentation.
751
752 If unsure, say N.
753
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -0700754config FB_I810_I2C
755 bool "Enable DDC Support"
756 depends on FB_I810 && I2C && FB_I810_GTF
757 select I2C_ALGOBIT
758 help
759
Linus Torvalds1da177e2005-04-16 15:20:36 -0700760config FB_INTEL
761 tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
762 depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
763 select AGP
764 select AGP_INTEL
765 select FB_MODE_HELPERS
766 select FB_CFB_FILLRECT
767 select FB_CFB_COPYAREA
768 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700769 help
770 This driver supports the on-board graphics built in to the Intel
771 830M/845G/852GM/855GM/865G chipsets.
772 Say Y if you have and plan to use such a board.
773
774 To compile this driver as a module, choose M here: the
775 module will be called intelfb.
776
777config FB_INTEL_DEBUG
778 bool "Intel driver Debug Messages"
779 depends on FB_INTEL
780 ---help---
781 Say Y here if you want the Intel driver to output all sorts
782 of debugging informations to provide to the maintainer when
783 something goes wrong.
784
785config FB_MATROX
786 tristate "Matrox acceleration"
787 depends on FB && PCI
788 select FB_CFB_FILLRECT
789 select FB_CFB_COPYAREA
790 select FB_CFB_IMAGEBLIT
791 select FB_SOFT_CURSOR
792 select FB_TILEBLITTING
793 select FB_MACMODES if PPC_PMAC
794 ---help---
795 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
796 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
797 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
798 Matrox G400, G450 or G550 card in your box.
799
800 To compile this driver as a module, choose M here: the
801 module will be called matroxfb.
802
803 You can pass several parameters to the driver at boot time or at
804 module load time. The parameters look like "video=matrox:XXX", and
805 are described in <file:Documentation/fb/matroxfb.txt>.
806
807config FB_MATROX_MILLENIUM
808 bool "Millennium I/II support"
809 depends on FB_MATROX
810 help
811 Say Y here if you have a Matrox Millennium or Matrox Millennium II
812 video card. If you select "Advanced lowlevel driver options" below,
813 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
814 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
815 also use font widths different from 8.
816
817config FB_MATROX_MYSTIQUE
818 bool "Mystique support"
819 depends on FB_MATROX
820 help
821 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
822 video card. If you select "Advanced lowlevel driver options" below,
823 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
824 packed pixel and 32 bpp packed pixel. You can also use font widths
825 different from 8.
826
827config FB_MATROX_G
828 bool "G100/G200/G400/G450/G550 support"
829 depends on FB_MATROX
830 ---help---
831 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
832 video card. If you select "Advanced lowlevel driver options", you
833 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
834 pixel and 32 bpp packed pixel. You can also use font widths
835 different from 8.
836
837 If you need support for G400 secondary head, you must first say Y to
838 "I2C support" in the character devices section, and then to
839 "Matrox I2C support" and "G400 second head support" here in the
840 framebuffer section. G450/G550 secondary head and digital output
841 are supported without additional modules.
842
843 The driver starts in monitor mode. You must use the matroxset tool
844 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
845 swap primary and secondary head outputs, or to change output mode.
846 Secondary head driver always start in 640x480 resolution and you
847 must use fbset to change it.
848
849 Do not forget that second head supports only 16 and 32 bpp
850 packed pixels, so it is a good idea to compile them into the kernel
851 too. You can use only some font widths, as the driver uses generic
852 painting procedures (the secondary head does not use acceleration
853 engine).
854
855 G450/G550 hardware can display TV picture only from secondary CRTC,
856 and it performs no scaling, so picture must have 525 or 625 lines.
857
858config FB_MATROX_I2C
859 tristate "Matrox I2C support"
860 depends on FB_MATROX && I2C
861 select I2C_ALGOBIT
862 ---help---
863 This drivers creates I2C buses which are needed for accessing the
864 DDC (I2C) bus present on all Matroxes, an I2C bus which
865 interconnects Matrox optional devices, like MGA-TVO on G200 and
866 G400, and the secondary head DDC bus, present on G400 only.
867
868 You can say Y or M here if you want to experiment with monitor
869 detection code. You must say Y or M here if you want to use either
870 second head of G400 or MGA-TVO on G200 or G400.
871
872 If you compile it as module, it will create a module named
873 i2c-matroxfb.
874
875config FB_MATROX_MAVEN
876 tristate "G400 second head support"
877 depends on FB_MATROX_G && FB_MATROX_I2C
878 ---help---
879 WARNING !!! This support does not work with G450 !!!
880
881 Say Y or M here if you want to use a secondary head (meaning two
882 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
883 head is not compatible with accelerated XFree 3.3.x SVGA servers -
884 secondary head output is blanked while you are in X. With XFree
885 3.9.17 preview you can use both heads if you use SVGA over fbdev or
886 the fbdev driver on first head and the fbdev driver on second head.
887
888 If you compile it as module, two modules are created,
889 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
890 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
891 also load i2c-matroxfb to get it to run.
892
893 The driver starts in monitor mode and you must use the matroxset
894 tool (available at
895 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
896 PAL or NTSC or to swap primary and secondary head outputs.
897 Secondary head driver also always start in 640x480 resolution, you
898 must use fbset to change it.
899
900 Also do not forget that second head supports only 16 and 32 bpp
901 packed pixels, so it is a good idea to compile them into the kernel
902 too. You can use only some font widths, as the driver uses generic
903 painting procedures (the secondary head does not use acceleration
904 engine).
905
906config FB_MATROX_MULTIHEAD
907 bool "Multihead support"
908 depends on FB_MATROX
909 ---help---
910 Say Y here if you have more than one (supported) Matrox device in
911 your computer and you want to use all of them for different monitors
912 ("multihead"). If you have only one device, you should say N because
913 the driver compiled with Y is larger and a bit slower, especially on
914 ia32 (ix86).
915
916 If you said M to "Matrox unified accelerated driver" and N here, you
917 will still be able to use several Matrox devices simultaneously:
918 insert several instances of the module matroxfb into the kernel
919 with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
920 for the different Matrox devices. This method is slightly faster but
921 uses 40 KB of kernel memory per Matrox card.
922
923 There is no need for enabling 'Matrox multihead support' if you have
924 only one Matrox card in the box.
925
926config FB_RADEON_OLD
927 tristate "ATI Radeon display support (Old driver)"
928 depends on FB && PCI
929 select FB_CFB_FILLRECT
930 select FB_CFB_COPYAREA
931 select FB_CFB_IMAGEBLIT
932 select FB_SOFT_CURSOR
933 select FB_MACMODES if PPC
934 help
935 Choose this option if you want to use an ATI Radeon graphics card as
936 a framebuffer device. There are both PCI and AGP versions. You
937 don't need to choose this to run the Radeon in plain VGA mode.
938 There is a product page at
939 <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
940
941config FB_RADEON
942 tristate "ATI Radeon display support"
943 depends on FB && PCI
944 select I2C_ALGOBIT if FB_RADEON_I2C
945 select I2C if FB_RADEON_I2C
946 select FB_MODE_HELPERS
947 select FB_CFB_FILLRECT
948 select FB_CFB_COPYAREA
949 select FB_CFB_IMAGEBLIT
950 select FB_SOFT_CURSOR
951 select FB_MACMODES if PPC_OF
952 help
953 Choose this option if you want to use an ATI Radeon graphics card as
954 a framebuffer device. There are both PCI and AGP versions. You
955 don't need to choose this to run the Radeon in plain VGA mode.
956
957 If you say Y here and want DDC/I2C support you must first say Y to
958 "I2C support" and "I2C bit-banging support" in the character devices
959 section.
960
961 If you say M here then "I2C support" and "I2C bit-banging support"
962 can be build either as modules or built-in.
963
964 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -0700965 http://apps.ati.com/ATIcompare/
Linus Torvalds1da177e2005-04-16 15:20:36 -0700966config FB_RADEON_I2C
967 bool "DDC/I2C for ATI Radeon support"
968 depends on FB_RADEON
969 default y
970 help
971 Say Y here if you want DDC/I2C support for your Radeon board.
972
973config FB_RADEON_DEBUG
974 bool "Lots of debug output from Radeon driver"
975 depends on FB_RADEON
976 default n
977 help
978 Say Y here if you want the Radeon driver to output all sorts
979 of debugging informations to provide to the maintainer when
980 something goes wrong.
981
982config FB_ATY128
983 tristate "ATI Rage128 display support"
984 depends on FB && PCI
985 select FB_CFB_FILLRECT
986 select FB_CFB_COPYAREA
987 select FB_CFB_IMAGEBLIT
988 select FB_SOFT_CURSOR
989 select FB_MACMODES if PPC_PMAC
990 help
991 This driver supports graphics boards with the ATI Rage128 chips.
992 Say Y if you have such a graphics board and read
993 <file:Documentation/fb/aty128fb.txt>.
994
995 To compile this driver as a module, choose M here: the
996 module will be called aty128fb.
997
998config FB_ATY
999 tristate "ATI Mach64 display support" if PCI || ATARI
1000 depends on FB
1001 select FB_CFB_FILLRECT
1002 select FB_CFB_COPYAREA
1003 select FB_CFB_IMAGEBLIT
1004 select FB_SOFT_CURSOR
1005 select FB_MACMODES if PPC
1006 help
1007 This driver supports graphics boards with the ATI Mach64 chips.
1008 Say Y if you have such a graphics board.
1009
1010 To compile this driver as a module, choose M here: the
1011 module will be called atyfb.
1012
1013config FB_ATY_CT
1014 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1015 depends on PCI && FB_ATY
1016 default y if SPARC64 && FB_PCI
1017 help
1018 Say Y here to support use of ATI's 64-bit Rage boards (or other
1019 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1020 framebuffer device. The ATI product support page for these boards
1021 is at <http://support.ati.com/products/pc/mach64/>.
1022
1023config FB_ATY_GENERIC_LCD
1024 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1025 depends on FB_ATY_CT
1026 help
1027 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1028 Rage XC, or Rage XL chipset.
1029
1030config FB_ATY_XL_INIT
1031 bool "Rage XL No-BIOS Init support"
1032 depends on FB_ATY_CT
1033 help
1034 Say Y here to support booting a Rage XL without BIOS support.
1035
1036config FB_ATY_GX
1037 bool "Mach64 GX support" if PCI
1038 depends on FB_ATY
1039 default y if ATARI
1040 help
1041 Say Y here to support use of the ATI Mach64 Graphics Expression
1042 board (or other boards based on the Mach64 GX chipset) as a
1043 framebuffer device. The ATI product support page for these boards
1044 is at
1045 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1046
1047config FB_SAVAGE
1048 tristate "S3 Savage support"
1049 depends on FB && PCI && EXPERIMENTAL
1050 select I2C_ALGOBIT if FB_SAVAGE_I2C
1051 select I2C if FB_SAVAGE_I2C
1052 select FB_MODE_HELPERS
1053 select FB_CFB_FILLRECT
1054 select FB_CFB_COPYAREA
1055 select FB_CFB_IMAGEBLIT
1056 select FB_SOFT_CURSOR
1057 help
1058 This driver supports notebooks and computers with S3 Savage PCI/AGP
1059 chips.
1060
1061 Say Y if you have such a graphics card.
1062
1063 To compile this driver as a module, choose M here; the module
1064 will be called savagefb.
1065
1066config FB_SAVAGE_I2C
1067 bool "Enable DDC2 Support"
1068 depends on FB_SAVAGE
1069 help
1070 This enables I2C support for S3 Savage Chipsets. This is used
1071 only for getting EDID information from the attached display
1072 allowing for robust video mode handling and switching.
1073
1074 Because fbdev-2.6 requires that drivers must be able to
1075 independently validate video mode parameters, you should say Y
1076 here.
1077
1078config FB_SAVAGE_ACCEL
1079 bool "Enable Console Acceleration"
1080 depends on FB_SAVAGE
1081 default n
1082 help
1083 This option will compile in console acceleration support. If
1084 the resulting framebuffer console has bothersome glitches, then
1085 choose N here.
1086
1087config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001088 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001089 depends on FB && PCI
1090 select FB_CFB_FILLRECT
1091 select FB_CFB_COPYAREA
1092 select FB_CFB_IMAGEBLIT
1093 select FB_SOFT_CURSOR
1094 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001095 This is the frame buffer device driver for the SiS 300, 315, 330
1096 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1097 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001098
1099 To compile this driver as a module, choose M here; the module
1100 will be called sisfb.
1101
1102config FB_SIS_300
1103 bool "SiS 300 series support"
1104 depends on FB_SIS
1105 help
1106 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1107
1108config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001109 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001110 depends on FB_SIS
1111 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001112 Say Y here to support use of the SiS 315, 330 and 340 series
1113 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1114 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001115
1116config FB_NEOMAGIC
1117 tristate "NeoMagic display support"
1118 depends on FB && PCI
1119 select FB_MODE_HELPERS
1120 select FB_CFB_FILLRECT
1121 select FB_CFB_COPYAREA
1122 select FB_CFB_IMAGEBLIT
1123 select FB_SOFT_CURSOR
1124 help
1125 This driver supports notebooks with NeoMagic PCI chips.
1126 Say Y if you have such a graphics card.
1127
1128 To compile this driver as a module, choose M here: the
1129 module will be called neofb.
1130
1131config FB_KYRO
1132 tristate "IMG Kyro support"
1133 depends on FB && PCI
1134 select FB_CFB_FILLRECT
1135 select FB_CFB_COPYAREA
1136 select FB_CFB_IMAGEBLIT
1137 select FB_SOFT_CURSOR
1138 help
1139 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1140 graphics board.
1141
1142 To compile this driver as a module, choose M here: the
1143 module will be called kyrofb.
1144
1145config FB_3DFX
1146 tristate "3Dfx Banshee/Voodoo3 display support"
1147 depends on FB && PCI
1148 select FB_CFB_IMAGEBLIT
1149 select FB_CFB_FILLRECT
1150 select FB_CFB_COPYAREA
1151 select FB_SOFT_CURSOR
1152 help
1153 This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
1154 chips. Say Y if you have such a graphics board.
1155
1156 To compile this driver as a module, choose M here: the
1157 module will be called tdfxfb.
1158
1159config FB_3DFX_ACCEL
1160 bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
1161 depends on FB_3DFX && EXPERIMENTAL
1162 ---help---
1163 This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
1164 with acceleration functions.
1165
1166
1167config FB_VOODOO1
1168 tristate "3Dfx Voodoo Graphics (sst1) support"
1169 depends on FB && PCI
1170 select FB_CFB_FILLRECT
1171 select FB_CFB_COPYAREA
1172 select FB_CFB_IMAGEBLIT
1173 select FB_SOFT_CURSOR
1174 ---help---
1175 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1176 Voodoo2 (cvg) based graphics card.
1177
1178 To compile this driver as a module, choose M here: the
1179 module will be called sstfb.
1180
1181 WARNING: Do not use any application that uses the 3D engine
1182 (namely glide) while using this driver.
1183 Please read the <file:Documentation/fb/README-sstfb.txt> for supported
1184 options and other important info support.
1185
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001186config FB_CYBLA
1187 tristate "Cyberblade/i1 support"
1188 depends on FB && PCI
1189 select FB_CFB_IMAGEBLIT
1190 select FB_SOFT_CURSOR
1191 select VIDEO_SELECT
1192 ---help---
1193 This driver is supposed to support the Trident Cyberblade/i1
1194 graphics core integrated in the VIA VT8601A North Bridge,
1195 also known as VIA Apollo PLE133.
1196
1197 Status:
1198 - Developed, tested and working on EPIA 5000 and EPIA 800.
1199 - Does work reliable on all systems with CRT/LCD connected to
1200 normal VGA ports.
1201 - Should work on systems that do use the internal LCD port, but
1202 this is absolutely not tested.
1203
1204 Character imageblit, copyarea and rectangle fill are hw accelerated,
1205 ypan scrolling is used by default.
1206
1207 Please do read <file:Documentation/fb/cyblafb/*>.
1208
1209 To compile this driver as a module, choose M here: the
1210 module will be called cyblafb.
1211
Linus Torvalds1da177e2005-04-16 15:20:36 -07001212config FB_TRIDENT
1213 tristate "Trident support"
1214 depends on FB && PCI
1215 select FB_CFB_FILLRECT
1216 select FB_CFB_COPYAREA
1217 select FB_CFB_IMAGEBLIT
1218 select FB_SOFT_CURSOR
1219 ---help---
1220 This driver is supposed to support graphics boards with the
1221 Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
1222 but also on some motherboards. For more information, read
1223 <file:Documentation/fb/tridentfb.txt>
1224
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001225 Cyberblade/i1 support will be removed soon, use the cyblafb driver
1226 instead.
1227
Linus Torvalds1da177e2005-04-16 15:20:36 -07001228 Say Y if you have such a graphics board.
1229
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001230
Linus Torvalds1da177e2005-04-16 15:20:36 -07001231 To compile this driver as a module, choose M here: the
1232 module will be called tridentfb.
1233
1234config FB_TRIDENT_ACCEL
1235 bool "Trident Acceleration functions (EXPERIMENTAL)"
1236 depends on FB_TRIDENT && EXPERIMENTAL
1237 ---help---
1238 This will compile the Trident frame buffer device with
1239 acceleration functions.
1240
Linus Torvalds1da177e2005-04-16 15:20:36 -07001241config FB_PM3
1242 tristate "Permedia3 support"
1243 depends on FB && PCI && BROKEN
1244 help
1245 This is the frame buffer device driver for the 3DLabs Permedia3
1246 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1247 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1248 and maybe other boards.
1249
1250config FB_E1356
1251 tristate "Epson SED1356 framebuffer support"
1252 depends on FB && EXPERIMENTAL && PCI && MIPS
1253
1254config PB1000_CRT
1255 bool "Use CRT on Pb1000 (J65)"
1256 depends on MIPS_PB1000=y && FB_E1356
1257
1258config PB1000_NTSC
1259 bool "Use Compsite NTSC on Pb1000 (J63)"
1260 depends on MIPS_PB1000=y && FB_E1356
1261
1262config PB1000_TFT
1263 bool "Use TFT Panel on Pb1000 (J64)"
1264 depends on MIPS_PB1000=y && FB_E1356
1265
1266config PB1500_CRT
1267 bool "Use CRT on Pb1500 " if MIPS_PB1500=y
1268 depends on FB_E1356
1269
1270config PB1500_CRT
1271 prompt "Use CRT on Pb1100 "
1272 depends on FB_E1356 && MIPS_PB1100=y
1273
1274config PB1500_TFT
1275 bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
1276 depends on FB_E1356
1277
1278config PB1500_TFT
1279 prompt "Use TFT Panel on Pb1100 "
1280 depends on FB_E1356 && MIPS_PB1100=y
1281
1282config FB_AU1100
1283 bool "Au1100 LCD Driver"
1284 depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
1285
1286source "drivers/video/geode/Kconfig"
1287
1288config FB_SBUS
1289 bool "SBUS and UPA framebuffers"
1290 depends on (FB = y) && (SPARC32 || SPARC64)
1291 help
1292 Say Y if you want support for SBUS or UPA based frame buffer device.
1293
1294config FB_FFB
1295 bool "Creator/Creator3D/Elite3D support"
1296 depends on FB_SBUS && SPARC64
1297 select FB_CFB_COPYAREA
1298 select FB_CFB_IMAGEBLIT
1299 select FB_SOFT_CURSOR
1300 help
1301 This is the frame buffer device driver for the Creator, Creator3D,
1302 and Elite3D graphics boards.
1303
1304config FB_TCX
1305 bool "TCX (SS4/SS5 only) support"
1306 depends on FB_SBUS
1307 select FB_CFB_FILLRECT
1308 select FB_CFB_COPYAREA
1309 select FB_CFB_IMAGEBLIT
1310 select FB_SOFT_CURSOR
1311 help
1312 This is the frame buffer device driver for the TCX 24/8bit frame
1313 buffer.
1314
1315config FB_CG14
1316 bool "CGfourteen (SX) support"
1317 depends on FB_SBUS
1318 select FB_CFB_FILLRECT
1319 select FB_CFB_COPYAREA
1320 select FB_CFB_IMAGEBLIT
1321 select FB_SOFT_CURSOR
1322 help
1323 This is the frame buffer device driver for the CGfourteen frame
1324 buffer on Desktop SPARCsystems with the SX graphics option.
1325
1326config FB_P9100
1327 bool "P9100 (Sparcbook 3 only) support"
1328 depends on FB_SBUS
1329 select FB_CFB_FILLRECT
1330 select FB_CFB_COPYAREA
1331 select FB_CFB_IMAGEBLIT
1332 select FB_SOFT_CURSOR
1333 help
1334 This is the frame buffer device driver for the P9100 card
1335 supported on Sparcbook 3 machines.
1336
1337config FB_LEO
1338 bool "Leo (ZX) support"
1339 depends on FB_SBUS
1340 select FB_CFB_FILLRECT
1341 select FB_CFB_COPYAREA
1342 select FB_CFB_IMAGEBLIT
1343 select FB_SOFT_CURSOR
1344 help
1345 This is the frame buffer device driver for the SBUS-based Sun ZX
1346 (leo) frame buffer cards.
1347
1348config FB_PCI
1349 bool "PCI framebuffers"
1350 depends on (FB = y) && PCI && (SPARC64 || SPARC32)
1351
1352config FB_IGA
1353 bool "IGA 168x display support"
1354 depends on SPARC32 && FB_PCI
1355 select FB_CFB_FILLRECT
1356 select FB_CFB_COPYAREA
1357 select FB_CFB_IMAGEBLIT
1358 select FB_SOFT_CURSOR
1359 help
1360 This is the framebuffer device for the INTERGRAPHICS 1680 and
1361 successor frame buffer cards.
1362
1363config FB_HIT
1364 tristate "HD64461 Frame Buffer support"
1365 depends on FB && HD64461
1366 select FB_CFB_FILLRECT
1367 select FB_CFB_COPYAREA
1368 select FB_CFB_IMAGEBLIT
1369 select FB_SOFT_CURSOR
1370 help
1371 This is the frame buffer device driver for the Hitachi HD64461 LCD
1372 frame buffer card.
1373
1374config FB_PMAG_AA
1375 bool "PMAG-AA TURBOchannel framebuffer support"
1376 depends on (FB = y) && MACH_DECSTATION && TC
1377 select FB_CFB_FILLRECT
1378 select FB_CFB_COPYAREA
1379 select FB_CFB_IMAGEBLIT
1380 select FB_SOFT_CURSOR
1381 help
1382 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1383 used mainly in the MIPS-based DECstation series.
1384
1385config FB_PMAG_BA
1386 bool "PMAG-BA TURBOchannel framebuffer support"
1387 depends on (FB = y) && MACH_DECSTATION && TC
1388 select FB_CFB_FILLRECT
1389 select FB_CFB_COPYAREA
1390 select FB_CFB_IMAGEBLIT
1391 select FB_SOFT_CURSOR
1392 help
1393 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1394 used mainly in the MIPS-based DECstation series.
1395
1396config FB_PMAGB_B
1397 bool "PMAGB-B TURBOchannel framebuffer support"
1398 depends on (FB = y) && MACH_DECSTATION && TC
1399 select FB_CFB_FILLRECT
1400 select FB_CFB_COPYAREA
1401 select FB_CFB_IMAGEBLIT
1402 select FB_SOFT_CURSOR
1403 help
1404 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1405 in the MIPS-based DECstation series. The card is currently only
1406 supported in 1280x1024x8 mode.
1407
1408config FB_MAXINE
1409 bool "Maxine (Personal DECstation) onboard framebuffer support"
1410 depends on (FB = y) && MACH_DECSTATION && TC
1411 select FB_CFB_FILLRECT
1412 select FB_CFB_COPYAREA
1413 select FB_CFB_IMAGEBLIT
1414 select FB_SOFT_CURSOR
1415 help
1416 Support for the onboard framebuffer (1024x768x8) in the Personal
1417 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1418 Codename "Maxine").
1419
1420config FB_TX3912
1421 bool "TMPTX3912/PR31700 frame buffer support"
1422 depends on (FB = y) && NINO
1423 select FB_CFB_FILLRECT
1424 select FB_CFB_COPYAREA
1425 select FB_CFB_IMAGEBLIT
1426 select FB_SOFT_CURSOR
1427 help
1428 The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
1429 see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
1430
1431 Say Y here to enable kernel support for the on-board framebuffer.
1432
1433config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001434 bool "G364 frame buffer support"
1435 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001436 select FB_CFB_FILLRECT
1437 select FB_CFB_COPYAREA
1438 select FB_CFB_IMAGEBLIT
1439 select FB_SOFT_CURSOR
1440 help
1441 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1442 Olivetti M700-10 systems.
1443
1444config FB_68328
1445 bool "Motorola 68328 native frame buffer support"
1446 depends on FB && (M68328 || M68EZ328 || M68VZ328)
1447 select FB_CFB_FILLRECT
1448 select FB_CFB_COPYAREA
1449 select FB_CFB_IMAGEBLIT
1450 select FB_SOFT_CURSOR
1451 help
1452 Say Y here if you want to support the built-in frame buffer of
1453 the Motorola 68328 CPU family.
1454
1455config FB_PXA
1456 tristate "PXA LCD framebuffer support"
1457 depends on FB && ARCH_PXA
1458 select FB_CFB_FILLRECT
1459 select FB_CFB_COPYAREA
1460 select FB_CFB_IMAGEBLIT
1461 select FB_SOFT_CURSOR
1462 ---help---
1463 Frame buffer driver for the built-in LCD controller in the Intel
1464 PXA2x0 processor.
1465
1466 This driver is also available as a module ( = code which can be
1467 inserted and removed from the running kernel whenever you want). The
1468 module will be called vfb. If you want to compile it as a module,
1469 say M here and read <file:Documentation/modules.txt>.
1470
1471 If unsure, say N.
1472
1473config FB_W100
1474 tristate "W100 frame buffer support"
1475 depends on FB && PXA_SHARPSL
1476 select FB_CFB_FILLRECT
1477 select FB_CFB_COPYAREA
1478 select FB_CFB_IMAGEBLIT
1479 select FB_SOFT_CURSOR
1480 ---help---
1481 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1482
1483 This driver is also available as a module ( = code which can be
1484 inserted and removed from the running kernel whenever you want). The
1485 module will be called vfb. If you want to compile it as a module,
1486 say M here and read <file:Documentation/modules.txt>.
1487
1488 If unsure, say N.
1489
1490config FB_PXA_PARAMETERS
1491 bool "PXA LCD command line parameters"
1492 default n
1493 depends on FB_PXA
1494 ---help---
1495 Enable the use of kernel command line or module parameters
1496 to configure the physical properties of the LCD panel when
1497 using the PXA LCD driver.
1498
1499 This option allows you to override the panel parameters
1500 supplied by the platform in order to support multiple
1501 different models of flatpanel. If you will only be using a
1502 single model of flatpanel then you can safely leave this
1503 option disabled.
1504
1505 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1506
1507config FB_S1D13XXX
1508 tristate "Epson S1D13XXX framebuffer support"
1509 depends on FB
1510 select FB_CFB_FILLRECT
1511 select FB_CFB_COPYAREA
1512 select FB_CFB_IMAGEBLIT
1513 select FB_SOFT_CURSOR
1514 help
1515 Support for S1D13XXX framebuffer device family (currently only
1516 working with S1D13806). Product specs at
1517 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
1518
Arnaud Patard20fd5762005-09-09 13:10:07 -07001519config FB_S3C2410
1520 tristate "S3C2410 LCD framebuffer support"
1521 depends on FB && ARCH_S3C2410
1522 select FB_CFB_FILLRECT
1523 select FB_CFB_COPYAREA
1524 select FB_CFB_IMAGEBLIT
1525 select FB_SOFT_CURSOR
1526 ---help---
1527 Frame buffer driver for the built-in LCD controller in the Samsung
1528 S3C2410 processor.
1529
1530 This driver is also available as a module ( = code which can be
1531 inserted and removed from the running kernel whenever you want). The
1532 module will be called s3c2410fb. If you want to compile it as a module,
1533 say M here and read <file:Documentation/modules.txt>.
1534
1535 If unsure, say N.
1536config FB_S3C2410_DEBUG
1537 bool "S3C2410 lcd debug messages"
1538 depends on FB_S3C2410
1539 help
1540 Turn on debugging messages. Note that you can set/unset at run time
1541 through sysfs
1542
Linus Torvalds1da177e2005-04-16 15:20:36 -07001543config FB_VIRTUAL
1544 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
1545 depends on FB
1546 select FB_CFB_FILLRECT
1547 select FB_CFB_COPYAREA
1548 select FB_CFB_IMAGEBLIT
1549 select FB_SOFT_CURSOR
1550 ---help---
1551 This is a `virtual' frame buffer device. It operates on a chunk of
1552 unswappable kernel memory instead of on the memory of a graphics
1553 board. This means you cannot see any output sent to this frame
1554 buffer device, while it does consume precious memory. The main use
1555 of this frame buffer device is testing and debugging the frame
1556 buffer subsystem. Do NOT enable it for normal systems! To protect
1557 the innocent, it has to be enabled explicitly at boot time using the
1558 kernel option `video=vfb:'.
1559
1560 To compile this driver as a module, choose M here: the
1561 module will be called vfb.
1562
1563 If unsure, say N.
1564if VT
1565 source "drivers/video/console/Kconfig"
1566endif
1567
1568if FB || SGI_NEWPORT_CONSOLE
1569 source "drivers/video/logo/Kconfig"
1570endif
1571
1572if FB && SYSFS
1573 source "drivers/video/backlight/Kconfig"
1574endif
1575
1576endmenu
1577