blob: 859dba9b972ea883da8a91b7fef0cb0d9d5ded35 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2* cycx_main.c Cyclades Cyclom 2X WAN Link Driver. Main module.
3*
4* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
5*
6* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
7*
8* Based on sdlamain.c by Gene Kozin <genek@compuserve.com> &
9* Jaspreet Singh <jaspreet@sangoma.com>
10*
11* This program is free software; you can redistribute it and/or
12* modify it under the terms of the GNU General Public License
13* as published by the Free Software Foundation; either version
14* 2 of the License, or (at your option) any later version.
15* ============================================================================
16* Please look at the bitkeeper changelog (or any other scm tool that ends up
17* importing bitkeeper changelog or that replaces bitkeeper in the future as
18* main tool for linux development).
19*
20* 2001/05/09 acme Fix MODULE_DESC for debug, .bss nitpicks,
21* some cleanups
22* 2000/07/13 acme remove useless #ifdef MODULE and crap
23* #if KERNEL_VERSION > blah
24* 2000/07/06 acme __exit at cyclomx_cleanup
25* 2000/04/02 acme dprintk and cycx_debug
26* module_init/module_exit
27* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count
28* and cyclomx_close to cyclomx_mod_dec_use_count
29* 2000/01/08 acme cleanup
30* 1999/11/06 acme cycx_down back to life (it needs to be
31* called to iounmap the dpmbase)
32* 1999/08/09 acme removed references to enable_tx_int
33* use spinlocks instead of cli/sti in
34* cyclomx_set_state
35* 1999/05/19 acme works directly linked into the kernel
36* init_waitqueue_head for 2.3.* kernel
37* 1999/05/18 acme major cleanup (polling not needed), etc
38* 1998/08/28 acme minor cleanup (ioctls for firmware deleted)
39* queue_task activated
40* 1998/08/08 acme Initial version.
41*/
42
Linus Torvalds1da177e2005-04-16 15:20:36 -070043#include <linux/stddef.h> /* offsetof(), etc. */
44#include <linux/errno.h> /* return codes */
45#include <linux/string.h> /* inline memset(), etc. */
46#include <linux/slab.h> /* kmalloc(), kfree() */
47#include <linux/kernel.h> /* printk(), and other useful stuff */
48#include <linux/module.h> /* support for loadable modules */
49#include <linux/ioport.h> /* request_region(), release_region() */
50#include <linux/wanrouter.h> /* WAN router definitions */
51#include <linux/cyclomx.h> /* cyclomx common user API definitions */
52#include <linux/init.h> /* __init (when not using as a module) */
53
54unsigned int cycx_debug;
55
56MODULE_AUTHOR("Arnaldo Carvalho de Melo");
57MODULE_DESCRIPTION("Cyclom 2X Sync Card Driver.");
58MODULE_LICENSE("GPL");
59module_param(cycx_debug, int, 0);
60MODULE_PARM_DESC(cycx_debug, "cyclomx debug level");
61
62/* Defines & Macros */
63
64#define CYCX_DRV_VERSION 0 /* version number */
65#define CYCX_DRV_RELEASE 11 /* release (minor version) number */
66#define CYCX_MAX_CARDS 1 /* max number of adapters */
67
68#define CONFIG_CYCX_CARDS 1
69
70/* Function Prototypes */
71
72/* WAN link driver entry points */
73static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf);
74static int cycx_wan_shutdown(struct wan_device *wandev);
75
76/* Miscellaneous functions */
David Howells7d12e782006-10-05 14:55:46 +010077static irqreturn_t cycx_isr(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -070078
79/* Global Data
80 * Note: All data must be explicitly initialized!!!
81 */
82
83/* private data */
stephen hemmingerdcfc5d72010-09-02 14:29:35 +000084static const char cycx_drvname[] = "cyclomx";
85static const char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver";
86static const char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo "
Linus Torvalds1da177e2005-04-16 15:20:36 -070087 "<acme@conectiva.com.br>";
88static int cycx_ncards = CONFIG_CYCX_CARDS;
89static struct cycx_device *cycx_card_array; /* adapter data space */
90
91/* Kernel Loadable Module Entry Points */
92
93/*
94 * Module 'insert' entry point.
95 * o print announcement
96 * o allocate adapter data space
97 * o initialize static data
98 * o register all cards with WAN router
99 * o calibrate Cyclom 2X shared memory access delay.
100 *
101 * Return: 0 Ok
102 * < 0 error.
103 * Context: process
104 */
Adrian Bunk7665a082005-09-09 23:17:28 -0700105static int __init cycx_init(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700106{
107 int cnt, err = -ENOMEM;
108
109 printk(KERN_INFO "%s v%u.%u %s\n",
110 cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE,
111 cycx_copyright);
112
113 /* Verify number of cards and allocate adapter data space */
114 cycx_ncards = min_t(int, cycx_ncards, CYCX_MAX_CARDS);
115 cycx_ncards = max_t(int, cycx_ncards, 1);
Yoann Padioleaudd00cc42007-07-19 01:49:03 -0700116 cycx_card_array = kcalloc(cycx_ncards, sizeof(struct cycx_device), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700117 if (!cycx_card_array)
118 goto out;
119
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120
121 /* Register adapters with WAN router */
122 for (cnt = 0; cnt < cycx_ncards; ++cnt) {
123 struct cycx_device *card = &cycx_card_array[cnt];
124 struct wan_device *wandev = &card->wandev;
125
126 sprintf(card->devname, "%s%d", cycx_drvname, cnt + 1);
127 wandev->magic = ROUTER_MAGIC;
128 wandev->name = card->devname;
129 wandev->private = card;
130 wandev->setup = cycx_wan_setup;
131 wandev->shutdown = cycx_wan_shutdown;
132 err = register_wan_device(wandev);
133
134 if (err) {
135 printk(KERN_ERR "%s: %s registration failed with "
136 "error %d!\n",
137 cycx_drvname, card->devname, err);
138 break;
139 }
140 }
141
142 err = -ENODEV;
143 if (!cnt) {
144 kfree(cycx_card_array);
145 goto out;
146 }
147 err = 0;
148 cycx_ncards = cnt; /* adjust actual number of cards */
149out: return err;
150}
151
152/*
153 * Module 'remove' entry point.
154 * o unregister all adapters from the WAN router
155 * o release all remaining system resources
156 */
157static void __exit cycx_exit(void)
158{
159 int i = 0;
160
161 for (; i < cycx_ncards; ++i) {
162 struct cycx_device *card = &cycx_card_array[i];
163 unregister_wan_device(card->devname);
164 }
165
166 kfree(cycx_card_array);
167}
168
169/* WAN Device Driver Entry Points */
170/*
171 * Setup/configure WAN link driver.
172 * o check adapter state
173 * o make sure firmware is present in configuration
174 * o allocate interrupt vector
175 * o setup Cyclom 2X hardware
176 * o call appropriate routine to perform protocol-specific initialization
177 *
178 * This function is called when router handles ROUTER_SETUP IOCTL. The
179 * configuration structure is in kernel memory (including extended data, if
180 * any).
181 */
182static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf)
183{
184 int rc = -EFAULT;
185 struct cycx_device *card;
186 int irq;
187
188 /* Sanity checks */
189
190 if (!wandev || !wandev->private || !conf)
191 goto out;
192
193 card = wandev->private;
194 rc = -EBUSY;
195 if (wandev->state != WAN_UNCONFIGURED)
196 goto out;
197
198 rc = -EINVAL;
199 if (!conf->data_size || !conf->data) {
200 printk(KERN_ERR "%s: firmware not found in configuration "
201 "data!\n", wandev->name);
202 goto out;
203 }
204
205 if (conf->irq <= 0) {
206 printk(KERN_ERR "%s: can't configure without IRQ!\n",
207 wandev->name);
208 goto out;
209 }
210
211 /* Allocate IRQ */
212 irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */
213
214 if (request_irq(irq, cycx_isr, 0, wandev->name, card)) {
215 printk(KERN_ERR "%s: can't reserve IRQ %d!\n",
216 wandev->name, irq);
217 goto out;
218 }
219
220 /* Configure hardware, load firmware, etc. */
221 memset(&card->hw, 0, sizeof(card->hw));
222 card->hw.irq = irq;
223 card->hw.dpmsize = CYCX_WINDOWSIZE;
224 card->hw.fwid = CFID_X25_2X;
225 spin_lock_init(&card->lock);
226 init_waitqueue_head(&card->wait_stats);
227
228 rc = cycx_setup(&card->hw, conf->data, conf->data_size, conf->maddr);
229 if (rc)
230 goto out_irq;
231
232 /* Initialize WAN device data space */
233 wandev->irq = irq;
234 wandev->dma = wandev->ioport = 0;
235 wandev->maddr = (unsigned long)card->hw.dpmbase;
236 wandev->msize = card->hw.dpmsize;
237 wandev->hw_opt[2] = 0;
238 wandev->hw_opt[3] = card->hw.fwid;
239
240 /* Protocol-specific initialization */
241 switch (card->hw.fwid) {
242#ifdef CONFIG_CYCLOMX_X25
243 case CFID_X25_2X:
244 rc = cycx_x25_wan_init(card, conf);
245 break;
246#endif
247 default:
248 printk(KERN_ERR "%s: this firmware is not supported!\n",
249 wandev->name);
250 rc = -EINVAL;
251 }
252
253 if (rc) {
254 cycx_down(&card->hw);
255 goto out_irq;
256 }
257
258 rc = 0;
259out:
260 return rc;
261out_irq:
262 free_irq(irq, card);
263 goto out;
264}
265
266/*
267 * Shut down WAN link driver.
268 * o shut down adapter hardware
269 * o release system resources.
270 *
271 * This function is called by the router when device is being unregistered or
272 * when it handles ROUTER_DOWN IOCTL.
273 */
274static int cycx_wan_shutdown(struct wan_device *wandev)
275{
276 int ret = -EFAULT;
277 struct cycx_device *card;
278
279 /* sanity checks */
280 if (!wandev || !wandev->private)
281 goto out;
282
283 ret = 0;
284 if (wandev->state == WAN_UNCONFIGURED)
285 goto out;
286
287 card = wandev->private;
288 wandev->state = WAN_UNCONFIGURED;
289 cycx_down(&card->hw);
290 printk(KERN_INFO "%s: irq %d being freed!\n", wandev->name,
291 wandev->irq);
292 free_irq(wandev->irq, card);
293out: return ret;
294}
295
296/* Miscellaneous */
297/*
298 * Cyclom 2X Interrupt Service Routine.
299 * o acknowledge Cyclom 2X hardware interrupt.
300 * o call protocol-specific interrupt service routine, if any.
301 */
David Howells7d12e782006-10-05 14:55:46 +0100302static irqreturn_t cycx_isr(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303{
Jeff Garzikc31f28e2006-10-06 14:56:04 -0400304 struct cycx_device *card = dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700305
Jeff Garzikc31f28e2006-10-06 14:56:04 -0400306 if (card->wandev.state == WAN_UNCONFIGURED)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307 goto out;
308
309 if (card->in_isr) {
310 printk(KERN_WARNING "%s: interrupt re-entrancy on IRQ %d!\n",
311 card->devname, card->wandev.irq);
312 goto out;
313 }
314
315 if (card->isr)
316 card->isr(card);
317 return IRQ_HANDLED;
318out:
319 return IRQ_NONE;
320}
321
322/* Set WAN device state. */
323void cycx_set_state(struct cycx_device *card, int state)
324{
325 unsigned long flags;
326 char *string_state = NULL;
327
328 spin_lock_irqsave(&card->lock, flags);
329
330 if (card->wandev.state != state) {
331 switch (state) {
332 case WAN_CONNECTED:
333 string_state = "connected!";
334 break;
335 case WAN_DISCONNECTED:
336 string_state = "disconnected!";
337 break;
338 }
339 printk(KERN_INFO "%s: link %s\n", card->devname, string_state);
340 card->wandev.state = state;
341 }
342
343 card->state_tick = jiffies;
344 spin_unlock_irqrestore(&card->lock, flags);
345}
346
347module_init(cycx_init);
348module_exit(cycx_exit);