blob: 234f0b7eb21c1783b2503c7c49724139cae45618 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 *
3 * Linux MegaRAID device driver
4 *
5 * Copyright (c) 2003-2004 LSI Logic Corporation.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 *
12 * FILE : megaraid_mbox.c
Sumant Patrocd96d962007-01-05 07:10:09 -080013 * Version : v2.20.5.1 (Nov 16 2006)
Linus Torvalds1da177e2005-04-16 15:20:36 -070014 *
15 * Authors:
Sumant Patrocd96d962007-01-05 07:10:09 -080016 * Atul Mukker <Atul.Mukker@lsi.com>
17 * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com>
18 * Manoj Jose <Manoj.Jose@lsi.com>
19 * Seokmann Ju
Linus Torvalds1da177e2005-04-16 15:20:36 -070020 *
21 * List of supported controllers
22 *
23 * OEM Product Name VID DID SSVID SSID
24 * --- ------------ --- --- ---- ----
25 * Dell PERC3/QC 101E 1960 1028 0471
26 * Dell PERC3/DC 101E 1960 1028 0493
27 * Dell PERC3/SC 101E 1960 1028 0475
28 * Dell PERC3/Di 1028 1960 1028 0123
29 * Dell PERC4/SC 1000 1960 1028 0520
30 * Dell PERC4/DC 1000 1960 1028 0518
31 * Dell PERC4/QC 1000 0407 1028 0531
32 * Dell PERC4/Di 1028 000F 1028 014A
33 * Dell PERC 4e/Si 1028 0013 1028 016c
34 * Dell PERC 4e/Di 1028 0013 1028 016d
35 * Dell PERC 4e/Di 1028 0013 1028 016e
36 * Dell PERC 4e/Di 1028 0013 1028 016f
37 * Dell PERC 4e/Di 1028 0013 1028 0170
38 * Dell PERC 4e/DC 1000 0408 1028 0002
39 * Dell PERC 4e/SC 1000 0408 1028 0001
40 *
41 *
42 * LSI MegaRAID SCSI 320-0 1000 1960 1000 A520
43 * LSI MegaRAID SCSI 320-1 1000 1960 1000 0520
44 * LSI MegaRAID SCSI 320-2 1000 1960 1000 0518
45 * LSI MegaRAID SCSI 320-0X 1000 0407 1000 0530
46 * LSI MegaRAID SCSI 320-2X 1000 0407 1000 0532
47 * LSI MegaRAID SCSI 320-4X 1000 0407 1000 0531
48 * LSI MegaRAID SCSI 320-1E 1000 0408 1000 0001
49 * LSI MegaRAID SCSI 320-2E 1000 0408 1000 0002
50 * LSI MegaRAID SATA 150-4 1000 1960 1000 4523
51 * LSI MegaRAID SATA 150-6 1000 1960 1000 0523
52 * LSI MegaRAID SATA 300-4X 1000 0409 1000 3004
53 * LSI MegaRAID SATA 300-8X 1000 0409 1000 3008
54 *
55 * INTEL RAID Controller SRCU42X 1000 0407 8086 0532
56 * INTEL RAID Controller SRCS16 1000 1960 8086 0523
57 * INTEL RAID Controller SRCU42E 1000 0408 8086 0002
58 * INTEL RAID Controller SRCZCRX 1000 0407 8086 0530
59 * INTEL RAID Controller SRCS28X 1000 0409 8086 3008
60 * INTEL RAID Controller SROMBU42E 1000 0408 8086 3431
61 * INTEL RAID Controller SROMBU42E 1000 0408 8086 3499
62 * INTEL RAID Controller SRCU51L 1000 1960 8086 0520
63 *
64 * FSC MegaRAID PCI Express ROMB 1000 0408 1734 1065
65 *
66 * ACER MegaRAID ROMB-2E 1000 0408 1025 004D
67 *
68 * NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287
69 *
70 * For history of changes, see Documentation/ChangeLog.megaraid
71 */
72
73#include "megaraid_mbox.h"
74
75static int megaraid_init(void);
76static void megaraid_exit(void);
77
78static int megaraid_probe_one(struct pci_dev*, const struct pci_device_id *);
79static void megaraid_detach_one(struct pci_dev *);
Russell King5457b6a2005-10-16 21:32:46 +010080static void megaraid_mbox_shutdown(struct pci_dev *);
Linus Torvalds1da177e2005-04-16 15:20:36 -070081
82static int megaraid_io_attach(adapter_t *);
83static void megaraid_io_detach(adapter_t *);
84
85static int megaraid_init_mbox(adapter_t *);
86static void megaraid_fini_mbox(adapter_t *);
87
88static int megaraid_alloc_cmd_packets(adapter_t *);
89static void megaraid_free_cmd_packets(adapter_t *);
90
91static int megaraid_mbox_setup_dma_pools(adapter_t *);
92static void megaraid_mbox_teardown_dma_pools(adapter_t *);
93
94static int megaraid_sysfs_alloc_resources(adapter_t *);
95static void megaraid_sysfs_free_resources(adapter_t *);
96
97static int megaraid_abort_handler(struct scsi_cmnd *);
98static int megaraid_reset_handler(struct scsi_cmnd *);
99
100static int mbox_post_sync_cmd(adapter_t *, uint8_t []);
101static int mbox_post_sync_cmd_fast(adapter_t *, uint8_t []);
102static int megaraid_busywait_mbox(mraid_device_t *);
103static int megaraid_mbox_product_info(adapter_t *);
104static int megaraid_mbox_extended_cdb(adapter_t *);
105static int megaraid_mbox_support_ha(adapter_t *, uint16_t *);
106static int megaraid_mbox_support_random_del(adapter_t *);
107static int megaraid_mbox_get_max_sg(adapter_t *);
108static void megaraid_mbox_enum_raid_scsi(adapter_t *);
109static void megaraid_mbox_flush_cache(adapter_t *);
Sumant Patrocd96d962007-01-05 07:10:09 -0800110static int megaraid_mbox_fire_sync_cmd(adapter_t *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111
112static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
113static void megaraid_mbox_setup_device_map(adapter_t *);
114
115static int megaraid_queue_command(struct scsi_cmnd *,
116 void (*)(struct scsi_cmnd *));
117static scb_t *megaraid_mbox_build_cmd(adapter_t *, struct scsi_cmnd *, int *);
118static void megaraid_mbox_runpendq(adapter_t *, scb_t *);
119static void megaraid_mbox_prepare_pthru(adapter_t *, scb_t *,
120 struct scsi_cmnd *);
121static void megaraid_mbox_prepare_epthru(adapter_t *, scb_t *,
122 struct scsi_cmnd *);
123
David Howells7d12e782006-10-05 14:55:46 +0100124static irqreturn_t megaraid_isr(int, void *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700125
126static void megaraid_mbox_dpc(unsigned long);
127
Tony Jonesee959b02008-02-22 00:13:36 +0100128static ssize_t megaraid_sysfs_show_app_hndl(struct device *, struct device_attribute *attr, char *);
Yani Ioannou10523b32005-05-17 06:43:37 -0400129static ssize_t megaraid_sysfs_show_ldnum(struct device *, struct device_attribute *attr, char *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130
131static int megaraid_cmm_register(adapter_t *);
132static int megaraid_cmm_unregister(adapter_t *);
133static int megaraid_mbox_mm_handler(unsigned long, uioc_t *, uint32_t);
134static int megaraid_mbox_mm_command(adapter_t *, uioc_t *);
135static void megaraid_mbox_mm_done(adapter_t *, scb_t *);
136static int gather_hbainfo(adapter_t *, mraid_hba_info_t *);
137static int wait_till_fw_empty(adapter_t *);
138
139
140
Sumant Patrocd96d962007-01-05 07:10:09 -0800141MODULE_AUTHOR("megaraidlinux@lsi.com");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver");
143MODULE_LICENSE("GPL");
144MODULE_VERSION(MEGARAID_VERSION);
145
146/*
147 * ### modules parameters for driver ###
148 */
149
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800150/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151 * Set to enable driver to expose unconfigured disk to kernel
152 */
153static int megaraid_expose_unconf_disks = 0;
154module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0);
155MODULE_PARM_DESC(unconf_disks,
156 "Set to expose unconfigured disks to kernel (default=0)");
157
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800158/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159 * driver wait time if the adapter's mailbox is busy
160 */
161static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT;
162module_param_named(busy_wait, max_mbox_busy_wait, int, 0);
163MODULE_PARM_DESC(busy_wait,
164 "Max wait for mailbox in microseconds if busy (default=10)");
165
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800166/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167 * number of sectors per IO command
168 */
169static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS;
170module_param_named(max_sectors, megaraid_max_sectors, int, 0);
171MODULE_PARM_DESC(max_sectors,
172 "Maximum number of sectors per IO command (default=128)");
173
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800174/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175 * number of commands per logical unit
176 */
177static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN;
178module_param_named(cmd_per_lun, megaraid_cmd_per_lun, int, 0);
179MODULE_PARM_DESC(cmd_per_lun,
180 "Maximum number of commands per logical unit (default=64)");
181
182
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800183/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700184 * Fast driver load option, skip scanning for physical devices during load.
185 * This would result in non-disk devices being skipped during driver load
186 * time. These can be later added though, using /proc/scsi/scsi
187 */
188static unsigned int megaraid_fast_load = 0;
189module_param_named(fast_load, megaraid_fast_load, int, 0);
190MODULE_PARM_DESC(fast_load,
191 "Faster loading of the driver, skips physical devices! (default=0)");
192
193
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800194/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700195 * mraid_debug level - threshold for amount of information to be displayed by
196 * the driver. This level can be changed through modules parameters, ioctl or
197 * sysfs/proc interface. By default, print the announcement messages only.
198 */
199int mraid_debug_level = CL_ANN;
200module_param_named(debug_level, mraid_debug_level, int, 0);
201MODULE_PARM_DESC(debug_level, "Debug level for driver (default=0)");
202
203/*
204 * ### global data ###
205 */
206static uint8_t megaraid_mbox_version[8] =
Ju, Seokmann 672b2d32005-05-16 18:32:17 -0400207 { 0x02, 0x20, 0x04, 0x06, 3, 7, 20, 5 };
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208
209
210/*
211 * PCI table for all supported controllers.
212 */
213static struct pci_device_id pci_id_table_g[] = {
214 {
215 PCI_VENDOR_ID_DELL,
216 PCI_DEVICE_ID_PERC4_DI_DISCOVERY,
217 PCI_VENDOR_ID_DELL,
218 PCI_SUBSYS_ID_PERC4_DI_DISCOVERY,
219 },
220 {
221 PCI_VENDOR_ID_LSI_LOGIC,
222 PCI_DEVICE_ID_PERC4_SC,
223 PCI_VENDOR_ID_DELL,
224 PCI_SUBSYS_ID_PERC4_SC,
225 },
226 {
227 PCI_VENDOR_ID_LSI_LOGIC,
228 PCI_DEVICE_ID_PERC4_DC,
229 PCI_VENDOR_ID_DELL,
230 PCI_SUBSYS_ID_PERC4_DC,
231 },
232 {
233 PCI_VENDOR_ID_LSI_LOGIC,
Ju, Seokmann 672b2d32005-05-16 18:32:17 -0400234 PCI_DEVICE_ID_VERDE,
235 PCI_ANY_ID,
236 PCI_ANY_ID,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700237 },
238 {
239 PCI_VENDOR_ID_DELL,
240 PCI_DEVICE_ID_PERC4_DI_EVERGLADES,
241 PCI_VENDOR_ID_DELL,
242 PCI_SUBSYS_ID_PERC4_DI_EVERGLADES,
243 },
244 {
245 PCI_VENDOR_ID_DELL,
246 PCI_DEVICE_ID_PERC4E_SI_BIGBEND,
247 PCI_VENDOR_ID_DELL,
248 PCI_SUBSYS_ID_PERC4E_SI_BIGBEND,
249 },
250 {
251 PCI_VENDOR_ID_DELL,
252 PCI_DEVICE_ID_PERC4E_DI_KOBUK,
253 PCI_VENDOR_ID_DELL,
254 PCI_SUBSYS_ID_PERC4E_DI_KOBUK,
255 },
256 {
257 PCI_VENDOR_ID_DELL,
258 PCI_DEVICE_ID_PERC4E_DI_CORVETTE,
259 PCI_VENDOR_ID_DELL,
260 PCI_SUBSYS_ID_PERC4E_DI_CORVETTE,
261 },
262 {
263 PCI_VENDOR_ID_DELL,
264 PCI_DEVICE_ID_PERC4E_DI_EXPEDITION,
265 PCI_VENDOR_ID_DELL,
266 PCI_SUBSYS_ID_PERC4E_DI_EXPEDITION,
267 },
268 {
269 PCI_VENDOR_ID_DELL,
270 PCI_DEVICE_ID_PERC4E_DI_GUADALUPE,
271 PCI_VENDOR_ID_DELL,
272 PCI_SUBSYS_ID_PERC4E_DI_GUADALUPE,
273 },
274 {
275 PCI_VENDOR_ID_LSI_LOGIC,
Ju, Seokmann 672b2d32005-05-16 18:32:17 -0400276 PCI_DEVICE_ID_DOBSON,
277 PCI_ANY_ID,
278 PCI_ANY_ID,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279 },
280 {
281 PCI_VENDOR_ID_AMI,
282 PCI_DEVICE_ID_AMI_MEGARAID3,
Ju, Seokmanned7e8ef2005-11-17 13:17:25 -0500283 PCI_ANY_ID,
284 PCI_ANY_ID,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700285 },
286 {
Ju, Seokmanned7e8ef2005-11-17 13:17:25 -0500287 PCI_VENDOR_ID_LSI_LOGIC,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288 PCI_DEVICE_ID_AMI_MEGARAID3,
Ju, Seokmanned7e8ef2005-11-17 13:17:25 -0500289 PCI_ANY_ID,
290 PCI_ANY_ID,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291 },
292 {
293 PCI_VENDOR_ID_LSI_LOGIC,
Ju, Seokmann 672b2d32005-05-16 18:32:17 -0400294 PCI_DEVICE_ID_LINDSAY,
295 PCI_ANY_ID,
296 PCI_ANY_ID,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700297 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298 {0} /* Terminating entry */
299};
300MODULE_DEVICE_TABLE(pci, pci_id_table_g);
301
302
Randy Dunlap382db812008-01-10 14:33:16 -0800303static struct pci_driver megaraid_pci_driver = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700304 .name = "megaraid",
305 .id_table = pci_id_table_g,
306 .probe = megaraid_probe_one,
307 .remove = __devexit_p(megaraid_detach_one),
Russell King5457b6a2005-10-16 21:32:46 +0100308 .shutdown = megaraid_mbox_shutdown,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309};
310
311
312
313// definitions for the device attributes for exporting logical drive number
314// for a scsi address (Host, Channel, Id, Lun)
315
Tony Jonesee959b02008-02-22 00:13:36 +0100316DEVICE_ATTR(megaraid_mbox_app_hndl, S_IRUSR, megaraid_sysfs_show_app_hndl,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700317 NULL);
318
319// Host template initializer for megaraid mbox sysfs device attributes
Tony Jonesee959b02008-02-22 00:13:36 +0100320static struct device_attribute *megaraid_shost_attrs[] = {
321 &dev_attr_megaraid_mbox_app_hndl,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700322 NULL,
323};
324
325
326DEVICE_ATTR(megaraid_mbox_ld, S_IRUSR, megaraid_sysfs_show_ldnum, NULL);
327
328// Host template initializer for megaraid mbox sysfs device attributes
329static struct device_attribute *megaraid_sdev_attrs[] = {
330 &dev_attr_megaraid_mbox_ld,
331 NULL,
332};
333
brking@charter.netf4c8aa12006-07-05 17:00:01 -0500334/**
335 * megaraid_change_queue_depth - Change the device's queue depth
336 * @sdev: scsi device struct
337 * @qdepth: depth to set
338 *
339 * Return value:
340 * actual depth set
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800341 */
brking@charter.netf4c8aa12006-07-05 17:00:01 -0500342static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth)
343{
344 if (qdepth > MBOX_MAX_SCSI_CMDS)
345 qdepth = MBOX_MAX_SCSI_CMDS;
346 scsi_adjust_queue_depth(sdev, 0, qdepth);
347 return sdev->queue_depth;
348}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349
350/*
351 * Scsi host template for megaraid unified driver
352 */
353static struct scsi_host_template megaraid_template_g = {
354 .module = THIS_MODULE,
355 .name = "LSI Logic MegaRAID driver",
356 .proc_name = "megaraid",
357 .queuecommand = megaraid_queue_command,
358 .eh_abort_handler = megaraid_abort_handler,
359 .eh_device_reset_handler = megaraid_reset_handler,
360 .eh_bus_reset_handler = megaraid_reset_handler,
361 .eh_host_reset_handler = megaraid_reset_handler,
brking@charter.netf4c8aa12006-07-05 17:00:01 -0500362 .change_queue_depth = megaraid_change_queue_depth,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363 .use_clustering = ENABLE_CLUSTERING,
364 .sdev_attrs = megaraid_sdev_attrs,
365 .shost_attrs = megaraid_shost_attrs,
366};
367
368
369/**
370 * megaraid_init - module load hook
371 *
372 * We register ourselves as hotplug enabled module and let PCI subsystem
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800373 * discover our adapters.
374 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700375static int __init
376megaraid_init(void)
377{
378 int rval;
379
380 // Announce the driver version
381 con_log(CL_ANN, (KERN_INFO "megaraid: %s %s\n", MEGARAID_VERSION,
382 MEGARAID_EXT_VERSION));
383
384 // check validity of module parameters
385 if (megaraid_cmd_per_lun > MBOX_MAX_SCSI_CMDS) {
386
387 con_log(CL_ANN, (KERN_WARNING
388 "megaraid mailbox: max commands per lun reset to %d\n",
389 MBOX_MAX_SCSI_CMDS));
390
391 megaraid_cmd_per_lun = MBOX_MAX_SCSI_CMDS;
392 }
393
394
395 // register as a PCI hot-plug driver module
Randy Dunlap382db812008-01-10 14:33:16 -0800396 rval = pci_register_driver(&megaraid_pci_driver);
Ju, Seokmann 672b2d32005-05-16 18:32:17 -0400397 if (rval < 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398 con_log(CL_ANN, (KERN_WARNING
399 "megaraid: could not register hotplug support.\n"));
400 }
401
402 return rval;
403}
404
405
406/**
407 * megaraid_exit - driver unload entry point
408 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800409 * We simply unwrap the megaraid_init routine here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700410 */
411static void __exit
412megaraid_exit(void)
413{
414 con_log(CL_DLEVEL1, (KERN_NOTICE "megaraid: unloading framework\n"));
415
416 // unregister as PCI hotplug driver
Randy Dunlap382db812008-01-10 14:33:16 -0800417 pci_unregister_driver(&megaraid_pci_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418
419 return;
420}
421
422
423/**
424 * megaraid_probe_one - PCI hotplug entry point
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800425 * @pdev : handle to this controller's PCI configuration space
426 * @id : pci device id of the class of controllers
Linus Torvalds1da177e2005-04-16 15:20:36 -0700427 *
428 * This routine should be called whenever a new adapter is detected by the
Robert P. J. Day3a4fa0a2007-10-19 23:10:43 +0200429 * PCI hotplug susbsystem.
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800430 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700431static int __devinit
432megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
433{
434 adapter_t *adapter;
435
436
437 // detected a new controller
438 con_log(CL_ANN, (KERN_INFO
439 "megaraid: probe new device %#4.04x:%#4.04x:%#4.04x:%#4.04x: ",
440 pdev->vendor, pdev->device, pdev->subsystem_vendor,
441 pdev->subsystem_device));
442
443 con_log(CL_ANN, ("bus %d:slot %d:func %d\n", pdev->bus->number,
444 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)));
445
446 if (pci_enable_device(pdev)) {
447 con_log(CL_ANN, (KERN_WARNING
448 "megaraid: pci_enable_device failed\n"));
449
450 return -ENODEV;
451 }
452
453 // Enable bus-mastering on this controller
454 pci_set_master(pdev);
455
456 // Allocate the per driver initialization structure
Yoann Padioleaudd00cc42007-07-19 01:49:03 -0700457 adapter = kzalloc(sizeof(adapter_t), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700458
459 if (adapter == NULL) {
460 con_log(CL_ANN, (KERN_WARNING
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -0700461 "megaraid: out of memory, %s %d.\n", __func__, __LINE__));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700462
463 goto out_probe_one;
464 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700465
466
467 // set up PCI related soft state and other pre-known parameters
468 adapter->unique_id = pdev->bus->number << 8 | pdev->devfn;
469 adapter->irq = pdev->irq;
470 adapter->pdev = pdev;
471
472 atomic_set(&adapter->being_detached, 0);
473
474 // Setup the default DMA mask. This would be changed later on
475 // depending on hardware capabilities
Yang Hongyang284901a2009-04-06 19:01:15 -0700476 if (pci_set_dma_mask(adapter->pdev, DMA_BIT_MASK(32)) != 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477
478 con_log(CL_ANN, (KERN_WARNING
479 "megaraid: pci_set_dma_mask failed:%d\n", __LINE__));
480
481 goto out_free_adapter;
482 }
483
484
485 // Initialize the synchronization lock for kernel and LLD
486 spin_lock_init(&adapter->lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487
488 // Initialize the command queues: the list of free SCBs and the list
489 // of pending SCBs.
490 INIT_LIST_HEAD(&adapter->kscb_pool);
491 spin_lock_init(SCSI_FREE_LIST_LOCK(adapter));
492
493 INIT_LIST_HEAD(&adapter->pend_list);
494 spin_lock_init(PENDING_LIST_LOCK(adapter));
495
496 INIT_LIST_HEAD(&adapter->completed_list);
497 spin_lock_init(COMPLETED_LIST_LOCK(adapter));
498
499
500 // Start the mailbox based controller
501 if (megaraid_init_mbox(adapter) != 0) {
502 con_log(CL_ANN, (KERN_WARNING
503 "megaraid: maibox adapter did not initialize\n"));
504
505 goto out_free_adapter;
506 }
507
508 // Register with LSI Common Management Module
509 if (megaraid_cmm_register(adapter) != 0) {
510
511 con_log(CL_ANN, (KERN_WARNING
512 "megaraid: could not register with management module\n"));
513
514 goto out_fini_mbox;
515 }
516
517 // setup adapter handle in PCI soft state
518 pci_set_drvdata(pdev, adapter);
519
520 // attach with scsi mid-layer
521 if (megaraid_io_attach(adapter) != 0) {
522
523 con_log(CL_ANN, (KERN_WARNING "megaraid: io attach failed\n"));
524
525 goto out_cmm_unreg;
526 }
527
528 return 0;
529
530out_cmm_unreg:
531 pci_set_drvdata(pdev, NULL);
532 megaraid_cmm_unregister(adapter);
533out_fini_mbox:
534 megaraid_fini_mbox(adapter);
535out_free_adapter:
536 kfree(adapter);
537out_probe_one:
538 pci_disable_device(pdev);
539
540 return -ENODEV;
541}
542
543
544/**
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800545 * megaraid_detach_one - release framework resources and call LLD release routine
546 * @pdev : handle for our PCI cofiguration space
Linus Torvalds1da177e2005-04-16 15:20:36 -0700547 *
548 * This routine is called during driver unload. We free all the allocated
549 * resources and call the corresponding LLD so that it can also release all
550 * its resources.
551 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800552 * This routine is also called from the PCI hotplug system.
553 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700554static void
555megaraid_detach_one(struct pci_dev *pdev)
556{
557 adapter_t *adapter;
558 struct Scsi_Host *host;
559
560
561 // Start a rollback on this adapter
562 adapter = pci_get_drvdata(pdev);
563
564 if (!adapter) {
565 con_log(CL_ANN, (KERN_CRIT
566 "megaraid: Invalid detach on %#4.04x:%#4.04x:%#4.04x:%#4.04x\n",
567 pdev->vendor, pdev->device, pdev->subsystem_vendor,
568 pdev->subsystem_device));
569
570 return;
571 }
572 else {
573 con_log(CL_ANN, (KERN_NOTICE
574 "megaraid: detaching device %#4.04x:%#4.04x:%#4.04x:%#4.04x\n",
575 pdev->vendor, pdev->device, pdev->subsystem_vendor,
576 pdev->subsystem_device));
577 }
578
579
580 host = adapter->host;
581
582 // do not allow any more requests from the management module for this
583 // adapter.
584 // FIXME: How do we account for the request which might still be
585 // pending with us?
586 atomic_set(&adapter->being_detached, 1);
587
588 // detach from the IO sub-system
589 megaraid_io_detach(adapter);
590
591 // reset the device state in the PCI structure. We check this
592 // condition when we enter here. If the device state is NULL,
593 // that would mean the device has already been removed
594 pci_set_drvdata(pdev, NULL);
595
596 // Unregister from common management module
597 //
598 // FIXME: this must return success or failure for conditions if there
599 // is a command pending with LLD or not.
600 megaraid_cmm_unregister(adapter);
601
602 // finalize the mailbox based controller and release all resources
603 megaraid_fini_mbox(adapter);
604
605 kfree(adapter);
606
607 scsi_host_put(host);
608
609 pci_disable_device(pdev);
610
611 return;
612}
613
614
615/**
616 * megaraid_mbox_shutdown - PCI shutdown for megaraid HBA
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800617 * @pdev : generic driver model device
Linus Torvalds1da177e2005-04-16 15:20:36 -0700618 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800619 * Shutdown notification, perform flush cache.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700620 */
621static void
Russell King5457b6a2005-10-16 21:32:46 +0100622megaraid_mbox_shutdown(struct pci_dev *pdev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700623{
Russell King5457b6a2005-10-16 21:32:46 +0100624 adapter_t *adapter = pci_get_drvdata(pdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700625 static int counter;
626
627 if (!adapter) {
628 con_log(CL_ANN, (KERN_WARNING
629 "megaraid: null device in shutdown\n"));
630 return;
631 }
632
633 // flush caches now
634 con_log(CL_ANN, (KERN_INFO "megaraid: flushing adapter %d...",
635 counter++));
636
637 megaraid_mbox_flush_cache(adapter);
638
639 con_log(CL_ANN, ("done\n"));
640}
641
642
643/**
644 * megaraid_io_attach - attach a device with the IO subsystem
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800645 * @adapter : controller's soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -0700646 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800647 * Attach this device with the IO subsystem.
648 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700649static int
650megaraid_io_attach(adapter_t *adapter)
651{
652 struct Scsi_Host *host;
653
654 // Initialize SCSI Host structure
655 host = scsi_host_alloc(&megaraid_template_g, 8);
656 if (!host) {
657 con_log(CL_ANN, (KERN_WARNING
658 "megaraid mbox: scsi_register failed\n"));
659
660 return -1;
661 }
662
663 SCSIHOST2ADAP(host) = (caddr_t)adapter;
664 adapter->host = host;
665
Linus Torvalds1da177e2005-04-16 15:20:36 -0700666 host->irq = adapter->irq;
667 host->unique_id = adapter->unique_id;
668 host->can_queue = adapter->max_cmds;
669 host->this_id = adapter->init_id;
670 host->sg_tablesize = adapter->sglen;
671 host->max_sectors = adapter->max_sectors;
672 host->cmd_per_lun = adapter->cmd_per_lun;
673 host->max_channel = adapter->max_channel;
674 host->max_id = adapter->max_target;
675 host->max_lun = adapter->max_lun;
676
677
678 // notify mid-layer about the new controller
679 if (scsi_add_host(host, &adapter->pdev->dev)) {
680
681 con_log(CL_ANN, (KERN_WARNING
682 "megaraid mbox: scsi_add_host failed\n"));
683
684 scsi_host_put(host);
685
686 return -1;
687 }
688
689 scsi_scan_host(host);
690
691 return 0;
692}
693
694
695/**
696 * megaraid_io_detach - detach a device from the IO subsystem
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800697 * @adapter : controller's soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -0700698 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800699 * Detach this device from the IO subsystem.
700 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700701static void
702megaraid_io_detach(adapter_t *adapter)
703{
704 struct Scsi_Host *host;
705
706 con_log(CL_DLEVEL1, (KERN_INFO "megaraid: io detach\n"));
707
708 host = adapter->host;
709
710 scsi_remove_host(host);
711
712 return;
713}
714
715
716/*
717 * START: Mailbox Low Level Driver
718 *
719 * This is section specific to the single mailbox based controllers
720 */
721
722/**
723 * megaraid_init_mbox - initialize controller
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800724 * @adapter : our soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -0700725 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800726 * - Allocate 16-byte aligned mailbox memory for firmware handshake
727 * - Allocate controller's memory resources
728 * - Find out all initialization data
729 * - Allocate memory required for all the commands
730 * - Use internal library of FW routines, build up complete soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -0700731 */
Randy Dunlapcedfb172006-06-25 05:48:05 -0700732static int __devinit
Linus Torvalds1da177e2005-04-16 15:20:36 -0700733megaraid_init_mbox(adapter_t *adapter)
734{
735 struct pci_dev *pdev;
736 mraid_device_t *raid_dev;
737 int i;
Ju, Seokmannfbf60802006-07-25 08:44:48 -0600738 uint32_t magic64;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700739
740
741 adapter->ito = MBOX_TIMEOUT;
742 pdev = adapter->pdev;
743
744 /*
745 * Allocate and initialize the init data structure for mailbox
746 * controllers
747 */
Yoann Padioleaudd00cc42007-07-19 01:49:03 -0700748 raid_dev = kzalloc(sizeof(mraid_device_t), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749 if (raid_dev == NULL) return -1;
750
Linus Torvalds1da177e2005-04-16 15:20:36 -0700751
752 /*
753 * Attach the adapter soft state to raid device soft state
754 */
755 adapter->raid_device = (caddr_t)raid_dev;
756 raid_dev->fast_load = megaraid_fast_load;
757
758
759 // our baseport
760 raid_dev->baseport = pci_resource_start(pdev, 0);
761
762 if (pci_request_regions(pdev, "MegaRAID: LSI Logic Corporation") != 0) {
763
764 con_log(CL_ANN, (KERN_WARNING
765 "megaraid: mem region busy\n"));
766
767 goto out_free_raid_dev;
768 }
769
770 raid_dev->baseaddr = ioremap_nocache(raid_dev->baseport, 128);
771
772 if (!raid_dev->baseaddr) {
773
774 con_log(CL_ANN, (KERN_WARNING
775 "megaraid: could not map hba memory\n") );
776
777 goto out_release_regions;
778 }
779
Sumant Patrocd96d962007-01-05 07:10:09 -0800780 /* initialize the mutual exclusion lock for the mailbox */
781 spin_lock_init(&raid_dev->mailbox_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782
Sumant Patrocd96d962007-01-05 07:10:09 -0800783 /* allocate memory required for commands */
784 if (megaraid_alloc_cmd_packets(adapter) != 0)
785 goto out_iounmap;
786
787 /*
788 * Issue SYNC cmd to flush the pending cmds in the adapter
789 * and initialize its internal state
790 */
791
792 if (megaraid_mbox_fire_sync_cmd(adapter))
793 con_log(CL_ANN, ("megaraid: sync cmd failed\n"));
794
795 /*
796 * Setup the rest of the soft state using the library of
797 * FW routines
798 */
799
800 /* request IRQ and register the interrupt service routine */
Thomas Gleixner1d6f3592006-07-01 19:29:42 -0700801 if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700802 adapter)) {
803
804 con_log(CL_ANN, (KERN_WARNING
805 "megaraid: Couldn't register IRQ %d!\n", adapter->irq));
Sumant Patrocd96d962007-01-05 07:10:09 -0800806 goto out_alloc_cmds;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700807
Linus Torvalds1da177e2005-04-16 15:20:36 -0700808 }
809
810 // Product info
Sumant Patrocd96d962007-01-05 07:10:09 -0800811 if (megaraid_mbox_product_info(adapter) != 0)
812 goto out_free_irq;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700813
814 // Do we support extended CDBs
815 adapter->max_cdb_sz = 10;
816 if (megaraid_mbox_extended_cdb(adapter) == 0) {
817 adapter->max_cdb_sz = 16;
818 }
819
820 /*
821 * Do we support cluster environment, if we do, what is the initiator
822 * id.
823 * NOTE: In a non-cluster aware firmware environment, the LLD should
824 * return 7 as initiator id.
825 */
826 adapter->ha = 0;
827 adapter->init_id = -1;
828 if (megaraid_mbox_support_ha(adapter, &adapter->init_id) == 0) {
829 adapter->ha = 1;
830 }
831
832 /*
833 * Prepare the device ids array to have the mapping between the kernel
834 * device address and megaraid device address.
835 * We export the physical devices on their actual addresses. The
836 * logical drives are exported on a virtual SCSI channel
837 */
838 megaraid_mbox_setup_device_map(adapter);
839
840 // If the firmware supports random deletion, update the device id map
841 if (megaraid_mbox_support_random_del(adapter)) {
842
843 // Change the logical drives numbers in device_ids array one
844 // slot in device_ids is reserved for target id, that's why
845 // "<=" below
846 for (i = 0; i <= MAX_LOGICAL_DRIVES_40LD; i++) {
847 adapter->device_ids[adapter->max_channel][i] += 0x80;
848 }
849 adapter->device_ids[adapter->max_channel][adapter->init_id] =
850 0xFF;
851
852 raid_dev->random_del_supported = 1;
853 }
854
855 /*
856 * find out the maximum number of scatter-gather elements supported by
857 * this firmware
858 */
859 adapter->sglen = megaraid_mbox_get_max_sg(adapter);
860
861 // enumerate RAID and SCSI channels so that all devices on SCSI
862 // channels can later be exported, including disk devices
863 megaraid_mbox_enum_raid_scsi(adapter);
864
865 /*
866 * Other parameters required by upper layer
867 *
868 * maximum number of sectors per IO command
869 */
870 adapter->max_sectors = megaraid_max_sectors;
871
872 /*
873 * number of queued commands per LUN.
874 */
875 adapter->cmd_per_lun = megaraid_cmd_per_lun;
876
877 /*
878 * Allocate resources required to issue FW calls, when sysfs is
879 * accessed
880 */
Sumant Patrocd96d962007-01-05 07:10:09 -0800881 if (megaraid_sysfs_alloc_resources(adapter) != 0)
882 goto out_free_irq;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700883
884 // Set the DMA mask to 64-bit. All supported controllers as capable of
885 // DMA in this range
Ju, Seokmannfbf60802006-07-25 08:44:48 -0600886 pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700887
Ju, Seokmannfbf60802006-07-25 08:44:48 -0600888 if (((magic64 == HBA_SIGNATURE_64_BIT) &&
889 ((adapter->pdev->subsystem_device !=
Andrey Mirkin8741ca72006-10-16 12:08:43 +0400890 PCI_SUBSYS_ID_MEGARAID_SATA_150_6) &&
Ju, Seokmannfbf60802006-07-25 08:44:48 -0600891 (adapter->pdev->subsystem_device !=
892 PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) ||
893 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
894 adapter->pdev->device == PCI_DEVICE_ID_VERDE) ||
895 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
896 adapter->pdev->device == PCI_DEVICE_ID_DOBSON) ||
897 (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
898 adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) ||
899 (adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
900 adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) ||
901 (adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
902 adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) {
Yang Hongyang6a355282009-04-06 19:01:13 -0700903 if (pci_set_dma_mask(adapter->pdev, DMA_BIT_MASK(64))) {
Ju, Seokmannfbf60802006-07-25 08:44:48 -0600904 con_log(CL_ANN, (KERN_WARNING
905 "megaraid: DMA mask for 64-bit failed\n"));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700906
Yang Hongyang284901a2009-04-06 19:01:15 -0700907 if (pci_set_dma_mask (adapter->pdev, DMA_BIT_MASK(32))) {
Ju, Seokmannfbf60802006-07-25 08:44:48 -0600908 con_log(CL_ANN, (KERN_WARNING
909 "megaraid: 32-bit DMA mask failed\n"));
910 goto out_free_sysfs_res;
911 }
912 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700913 }
914
915 // setup tasklet for DPC
916 tasklet_init(&adapter->dpc_h, megaraid_mbox_dpc,
917 (unsigned long)adapter);
918
919 con_log(CL_DLEVEL1, (KERN_INFO
920 "megaraid mbox hba successfully initialized\n"));
921
922 return 0;
923
924out_free_sysfs_res:
925 megaraid_sysfs_free_resources(adapter);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700926out_free_irq:
927 free_irq(adapter->irq, adapter);
Sumant Patrocd96d962007-01-05 07:10:09 -0800928out_alloc_cmds:
929 megaraid_free_cmd_packets(adapter);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700930out_iounmap:
931 iounmap(raid_dev->baseaddr);
932out_release_regions:
933 pci_release_regions(pdev);
934out_free_raid_dev:
935 kfree(raid_dev);
936
937 return -1;
938}
939
940
941/**
942 * megaraid_fini_mbox - undo controller initialization
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800943 * @adapter : our soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -0700944 */
945static void
946megaraid_fini_mbox(adapter_t *adapter)
947{
948 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
949
950 // flush all caches
951 megaraid_mbox_flush_cache(adapter);
952
953 tasklet_kill(&adapter->dpc_h);
954
955 megaraid_sysfs_free_resources(adapter);
956
957 megaraid_free_cmd_packets(adapter);
958
959 free_irq(adapter->irq, adapter);
960
961 iounmap(raid_dev->baseaddr);
962
963 pci_release_regions(adapter->pdev);
964
965 kfree(raid_dev);
966
967 return;
968}
969
970
971/**
972 * megaraid_alloc_cmd_packets - allocate shared mailbox
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800973 * @adapter : soft state of the raid controller
Linus Torvalds1da177e2005-04-16 15:20:36 -0700974 *
975 * Allocate and align the shared mailbox. This maibox is used to issue
976 * all the commands. For IO based controllers, the mailbox is also regsitered
977 * with the FW. Allocate memory for all commands as well.
Randy Dunlapa69b74d2007-01-05 22:41:48 -0800978 * This is our big allocator.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700979 */
980static int
981megaraid_alloc_cmd_packets(adapter_t *adapter)
982{
983 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
984 struct pci_dev *pdev;
985 unsigned long align;
986 scb_t *scb;
987 mbox_ccb_t *ccb;
988 struct mraid_pci_blk *epthru_pci_blk;
989 struct mraid_pci_blk *sg_pci_blk;
990 struct mraid_pci_blk *mbox_pci_blk;
991 int i;
992
993 pdev = adapter->pdev;
994
995 /*
996 * Setup the mailbox
997 * Allocate the common 16-byte aligned memory for the handshake
998 * mailbox.
999 */
1000 raid_dev->una_mbox64 = pci_alloc_consistent(adapter->pdev,
1001 sizeof(mbox64_t), &raid_dev->una_mbox64_dma);
1002
1003 if (!raid_dev->una_mbox64) {
1004 con_log(CL_ANN, (KERN_WARNING
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001005 "megaraid: out of memory, %s %d\n", __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001006 __LINE__));
1007 return -1;
1008 }
1009 memset(raid_dev->una_mbox64, 0, sizeof(mbox64_t));
1010
1011 /*
1012 * Align the mailbox at 16-byte boundary
1013 */
1014 raid_dev->mbox = &raid_dev->una_mbox64->mbox32;
1015
1016 raid_dev->mbox = (mbox_t *)((((unsigned long)raid_dev->mbox) + 15) &
1017 (~0UL ^ 0xFUL));
1018
1019 raid_dev->mbox64 = (mbox64_t *)(((unsigned long)raid_dev->mbox) - 8);
1020
1021 align = ((void *)raid_dev->mbox -
1022 ((void *)&raid_dev->una_mbox64->mbox32));
1023
1024 raid_dev->mbox_dma = (unsigned long)raid_dev->una_mbox64_dma + 8 +
1025 align;
1026
1027 // Allocate memory for commands issued internally
1028 adapter->ibuf = pci_alloc_consistent(pdev, MBOX_IBUF_SIZE,
1029 &adapter->ibuf_dma_h);
1030 if (!adapter->ibuf) {
1031
1032 con_log(CL_ANN, (KERN_WARNING
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001033 "megaraid: out of memory, %s %d\n", __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001034 __LINE__));
1035
1036 goto out_free_common_mbox;
1037 }
1038 memset(adapter->ibuf, 0, MBOX_IBUF_SIZE);
1039
1040 // Allocate memory for our SCSI Command Blocks and their associated
1041 // memory
1042
1043 /*
1044 * Allocate memory for the base list of scb. Later allocate memory for
1045 * CCBs and embedded components of each CCB and point the pointers in
1046 * scb to the allocated components
1047 * NOTE: The code to allocate SCB will be duplicated in all the LLD
1048 * since the calling routine does not yet know the number of available
1049 * commands.
1050 */
Yoann Padioleaudd00cc42007-07-19 01:49:03 -07001051 adapter->kscb_list = kcalloc(MBOX_MAX_SCSI_CMDS, sizeof(scb_t), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001052
1053 if (adapter->kscb_list == NULL) {
1054 con_log(CL_ANN, (KERN_WARNING
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001055 "megaraid: out of memory, %s %d\n", __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001056 __LINE__));
1057 goto out_free_ibuf;
1058 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001059
1060 // memory allocation for our command packets
1061 if (megaraid_mbox_setup_dma_pools(adapter) != 0) {
1062 con_log(CL_ANN, (KERN_WARNING
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001063 "megaraid: out of memory, %s %d\n", __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001064 __LINE__));
1065 goto out_free_scb_list;
1066 }
1067
1068 // Adjust the scb pointers and link in the free pool
1069 epthru_pci_blk = raid_dev->epthru_pool;
1070 sg_pci_blk = raid_dev->sg_pool;
1071 mbox_pci_blk = raid_dev->mbox_pool;
1072
1073 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1074 scb = adapter->kscb_list + i;
1075 ccb = raid_dev->ccb_list + i;
1076
1077 ccb->mbox = (mbox_t *)(mbox_pci_blk[i].vaddr + 16);
1078 ccb->raw_mbox = (uint8_t *)ccb->mbox;
1079 ccb->mbox64 = (mbox64_t *)(mbox_pci_blk[i].vaddr + 8);
1080 ccb->mbox_dma_h = (unsigned long)mbox_pci_blk[i].dma_addr + 16;
1081
1082 // make sure the mailbox is aligned properly
1083 if (ccb->mbox_dma_h & 0x0F) {
1084 con_log(CL_ANN, (KERN_CRIT
1085 "megaraid mbox: not aligned on 16-bytes\n"));
1086
1087 goto out_teardown_dma_pools;
1088 }
1089
1090 ccb->epthru = (mraid_epassthru_t *)
1091 epthru_pci_blk[i].vaddr;
1092 ccb->epthru_dma_h = epthru_pci_blk[i].dma_addr;
1093 ccb->pthru = (mraid_passthru_t *)ccb->epthru;
1094 ccb->pthru_dma_h = ccb->epthru_dma_h;
1095
1096
1097 ccb->sgl64 = (mbox_sgl64 *)sg_pci_blk[i].vaddr;
1098 ccb->sgl_dma_h = sg_pci_blk[i].dma_addr;
1099 ccb->sgl32 = (mbox_sgl32 *)ccb->sgl64;
1100
1101 scb->ccb = (caddr_t)ccb;
1102 scb->gp = 0;
1103
1104 scb->sno = i; // command index
1105
1106 scb->scp = NULL;
1107 scb->state = SCB_FREE;
1108 scb->dma_direction = PCI_DMA_NONE;
1109 scb->dma_type = MRAID_DMA_NONE;
1110 scb->dev_channel = -1;
1111 scb->dev_target = -1;
1112
1113 // put scb in the free pool
1114 list_add_tail(&scb->list, &adapter->kscb_pool);
1115 }
1116
1117 return 0;
1118
1119out_teardown_dma_pools:
1120 megaraid_mbox_teardown_dma_pools(adapter);
1121out_free_scb_list:
1122 kfree(adapter->kscb_list);
1123out_free_ibuf:
1124 pci_free_consistent(pdev, MBOX_IBUF_SIZE, (void *)adapter->ibuf,
1125 adapter->ibuf_dma_h);
1126out_free_common_mbox:
1127 pci_free_consistent(adapter->pdev, sizeof(mbox64_t),
1128 (caddr_t)raid_dev->una_mbox64, raid_dev->una_mbox64_dma);
1129
1130 return -1;
1131}
1132
1133
1134/**
1135 * megaraid_free_cmd_packets - free memory
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001136 * @adapter : soft state of the raid controller
Linus Torvalds1da177e2005-04-16 15:20:36 -07001137 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001138 * Release memory resources allocated for commands.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139 */
1140static void
1141megaraid_free_cmd_packets(adapter_t *adapter)
1142{
1143 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1144
1145 megaraid_mbox_teardown_dma_pools(adapter);
1146
1147 kfree(adapter->kscb_list);
1148
1149 pci_free_consistent(adapter->pdev, MBOX_IBUF_SIZE,
1150 (void *)adapter->ibuf, adapter->ibuf_dma_h);
1151
1152 pci_free_consistent(adapter->pdev, sizeof(mbox64_t),
1153 (caddr_t)raid_dev->una_mbox64, raid_dev->una_mbox64_dma);
1154 return;
1155}
1156
1157
1158/**
1159 * megaraid_mbox_setup_dma_pools - setup dma pool for command packets
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001160 * @adapter : HBA soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07001161 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001162 * Setup the dma pools for mailbox, passthru and extended passthru structures,
1163 * and scatter-gather lists.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001164 */
1165static int
1166megaraid_mbox_setup_dma_pools(adapter_t *adapter)
1167{
1168 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1169 struct mraid_pci_blk *epthru_pci_blk;
1170 struct mraid_pci_blk *sg_pci_blk;
1171 struct mraid_pci_blk *mbox_pci_blk;
1172 int i;
1173
1174
1175
1176 // Allocate memory for 16-bytes aligned mailboxes
1177 raid_dev->mbox_pool_handle = pci_pool_create("megaraid mbox pool",
1178 adapter->pdev,
1179 sizeof(mbox64_t) + 16,
1180 16, 0);
1181
1182 if (raid_dev->mbox_pool_handle == NULL) {
1183 goto fail_setup_dma_pool;
1184 }
1185
1186 mbox_pci_blk = raid_dev->mbox_pool;
1187 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1188 mbox_pci_blk[i].vaddr = pci_pool_alloc(
1189 raid_dev->mbox_pool_handle,
1190 GFP_KERNEL,
1191 &mbox_pci_blk[i].dma_addr);
1192 if (!mbox_pci_blk[i].vaddr) {
1193 goto fail_setup_dma_pool;
1194 }
1195 }
1196
1197 /*
1198 * Allocate memory for each embedded passthru strucuture pointer
1199 * Request for a 128 bytes aligned structure for each passthru command
1200 * structure
1201 * Since passthru and extended passthru commands are exclusive, they
1202 * share common memory pool. Passthru structures piggyback on memory
1203 * allocted to extended passthru since passthru is smaller of the two
1204 */
1205 raid_dev->epthru_pool_handle = pci_pool_create("megaraid mbox pthru",
1206 adapter->pdev, sizeof(mraid_epassthru_t), 128, 0);
1207
1208 if (raid_dev->epthru_pool_handle == NULL) {
1209 goto fail_setup_dma_pool;
1210 }
1211
1212 epthru_pci_blk = raid_dev->epthru_pool;
1213 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1214 epthru_pci_blk[i].vaddr = pci_pool_alloc(
1215 raid_dev->epthru_pool_handle,
1216 GFP_KERNEL,
1217 &epthru_pci_blk[i].dma_addr);
1218 if (!epthru_pci_blk[i].vaddr) {
1219 goto fail_setup_dma_pool;
1220 }
1221 }
1222
1223
1224 // Allocate memory for each scatter-gather list. Request for 512 bytes
1225 // alignment for each sg list
1226 raid_dev->sg_pool_handle = pci_pool_create("megaraid mbox sg",
1227 adapter->pdev,
1228 sizeof(mbox_sgl64) * MBOX_MAX_SG_SIZE,
1229 512, 0);
1230
1231 if (raid_dev->sg_pool_handle == NULL) {
1232 goto fail_setup_dma_pool;
1233 }
1234
1235 sg_pci_blk = raid_dev->sg_pool;
1236 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
1237 sg_pci_blk[i].vaddr = pci_pool_alloc(
1238 raid_dev->sg_pool_handle,
1239 GFP_KERNEL,
1240 &sg_pci_blk[i].dma_addr);
1241 if (!sg_pci_blk[i].vaddr) {
1242 goto fail_setup_dma_pool;
1243 }
1244 }
1245
1246 return 0;
1247
1248fail_setup_dma_pool:
1249 megaraid_mbox_teardown_dma_pools(adapter);
1250 return -1;
1251}
1252
1253
1254/**
1255 * megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001256 * @adapter : HBA soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07001257 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001258 * Teardown the dma pool for mailbox, passthru and extended passthru
1259 * structures, and scatter-gather lists.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001260 */
1261static void
1262megaraid_mbox_teardown_dma_pools(adapter_t *adapter)
1263{
1264 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1265 struct mraid_pci_blk *epthru_pci_blk;
1266 struct mraid_pci_blk *sg_pci_blk;
1267 struct mraid_pci_blk *mbox_pci_blk;
1268 int i;
1269
1270
1271 sg_pci_blk = raid_dev->sg_pool;
1272 for (i = 0; i < MBOX_MAX_SCSI_CMDS && sg_pci_blk[i].vaddr; i++) {
1273 pci_pool_free(raid_dev->sg_pool_handle, sg_pci_blk[i].vaddr,
1274 sg_pci_blk[i].dma_addr);
1275 }
1276 if (raid_dev->sg_pool_handle)
1277 pci_pool_destroy(raid_dev->sg_pool_handle);
1278
1279
1280 epthru_pci_blk = raid_dev->epthru_pool;
1281 for (i = 0; i < MBOX_MAX_SCSI_CMDS && epthru_pci_blk[i].vaddr; i++) {
1282 pci_pool_free(raid_dev->epthru_pool_handle,
1283 epthru_pci_blk[i].vaddr, epthru_pci_blk[i].dma_addr);
1284 }
1285 if (raid_dev->epthru_pool_handle)
1286 pci_pool_destroy(raid_dev->epthru_pool_handle);
1287
1288
1289 mbox_pci_blk = raid_dev->mbox_pool;
1290 for (i = 0; i < MBOX_MAX_SCSI_CMDS && mbox_pci_blk[i].vaddr; i++) {
1291 pci_pool_free(raid_dev->mbox_pool_handle,
1292 mbox_pci_blk[i].vaddr, mbox_pci_blk[i].dma_addr);
1293 }
1294 if (raid_dev->mbox_pool_handle)
1295 pci_pool_destroy(raid_dev->mbox_pool_handle);
1296
1297 return;
1298}
1299
1300
1301/**
1302 * megaraid_alloc_scb - detach and return a scb from the free list
1303 * @adapter : controller's soft state
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001304 * @scp : pointer to the scsi command to be executed
Linus Torvalds1da177e2005-04-16 15:20:36 -07001305 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001306 * Return the scb from the head of the free list. %NULL if there are none
1307 * available.
1308 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08001309static scb_t *
Linus Torvalds1da177e2005-04-16 15:20:36 -07001310megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp)
1311{
1312 struct list_head *head = &adapter->kscb_pool;
1313 scb_t *scb = NULL;
1314 unsigned long flags;
1315
1316 // detach scb from free pool
1317 spin_lock_irqsave(SCSI_FREE_LIST_LOCK(adapter), flags);
1318
1319 if (list_empty(head)) {
1320 spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1321 return NULL;
1322 }
1323
1324 scb = list_entry(head->next, scb_t, list);
1325 list_del_init(&scb->list);
1326
1327 spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1328
1329 scb->state = SCB_ACTIVE;
1330 scb->scp = scp;
1331 scb->dma_type = MRAID_DMA_NONE;
1332
1333 return scb;
1334}
1335
1336
1337/**
1338 * megaraid_dealloc_scb - return the scb to the free pool
1339 * @adapter : controller's soft state
1340 * @scb : scb to be freed
1341 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001342 * Return the scb back to the free list of scbs. The caller must 'flush' the
Linus Torvalds1da177e2005-04-16 15:20:36 -07001343 * SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc.
1344 * NOTE NOTE: Make sure the scb is not on any list before calling this
1345 * routine.
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001346 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001347static inline void
1348megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb)
1349{
1350 unsigned long flags;
1351
1352 // put scb in the free pool
1353 scb->state = SCB_FREE;
1354 scb->scp = NULL;
1355 spin_lock_irqsave(SCSI_FREE_LIST_LOCK(adapter), flags);
1356
1357 list_add(&scb->list, &adapter->kscb_pool);
1358
1359 spin_unlock_irqrestore(SCSI_FREE_LIST_LOCK(adapter), flags);
1360
1361 return;
1362}
1363
1364
1365/**
1366 * megaraid_mbox_mksgl - make the scatter-gather list
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001367 * @adapter : controller's soft state
1368 * @scb : scsi control block
Linus Torvalds1da177e2005-04-16 15:20:36 -07001369 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001370 * Prepare the scatter-gather list.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001371 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08001372static int
Linus Torvalds1da177e2005-04-16 15:20:36 -07001373megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb)
1374{
1375 struct scatterlist *sgl;
1376 mbox_ccb_t *ccb;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001377 struct scsi_cmnd *scp;
1378 int sgcnt;
1379 int i;
1380
1381
1382 scp = scb->scp;
1383 ccb = (mbox_ccb_t *)scb->ccb;
1384
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001385 sgcnt = scsi_dma_map(scp);
1386 BUG_ON(sgcnt < 0 || sgcnt > adapter->sglen);
1387
Linus Torvalds1da177e2005-04-16 15:20:36 -07001388 // no mapping required if no data to be transferred
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001389 if (!sgcnt)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001390 return 0;
1391
Linus Torvalds1da177e2005-04-16 15:20:36 -07001392 scb->dma_type = MRAID_DMA_WSG;
1393
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001394 scsi_for_each_sg(scp, sgl, sgcnt, i) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001395 ccb->sgl64[i].address = sg_dma_address(sgl);
1396 ccb->sgl64[i].length = sg_dma_len(sgl);
1397 }
1398
1399 // Return count of SG nodes
1400 return sgcnt;
1401}
1402
1403
1404/**
1405 * mbox_post_cmd - issue a mailbox command
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001406 * @adapter : controller's soft state
1407 * @scb : command to be issued
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001409 * Post the command to the controller if mailbox is available.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001410 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08001411static int
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412mbox_post_cmd(adapter_t *adapter, scb_t *scb)
1413{
1414 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
1415 mbox64_t *mbox64;
1416 mbox_t *mbox;
1417 mbox_ccb_t *ccb;
1418 unsigned long flags;
1419 unsigned int i = 0;
1420
1421
1422 ccb = (mbox_ccb_t *)scb->ccb;
1423 mbox = raid_dev->mbox;
1424 mbox64 = raid_dev->mbox64;
1425
1426 /*
1427 * Check for busy mailbox. If it is, return failure - the caller
1428 * should retry later.
1429 */
1430 spin_lock_irqsave(MAILBOX_LOCK(raid_dev), flags);
1431
1432 if (unlikely(mbox->busy)) {
1433 do {
1434 udelay(1);
1435 i++;
1436 rmb();
1437 } while(mbox->busy && (i < max_mbox_busy_wait));
1438
1439 if (mbox->busy) {
1440
1441 spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
1442
1443 return -1;
1444 }
1445 }
1446
1447
1448 // Copy this command's mailbox data into "adapter's" mailbox
1449 memcpy((caddr_t)mbox64, (caddr_t)ccb->mbox64, 22);
1450 mbox->cmdid = scb->sno;
1451
1452 adapter->outstanding_cmds++;
1453
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001454 if (scb->dma_direction == PCI_DMA_TODEVICE)
1455 pci_dma_sync_sg_for_device(adapter->pdev,
1456 scsi_sglist(scb->scp),
1457 scsi_sg_count(scb->scp),
1458 PCI_DMA_TODEVICE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001459
1460 mbox->busy = 1; // Set busy
1461 mbox->poll = 0;
1462 mbox->ack = 0;
1463 wmb();
1464
1465 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
1466
1467 spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
1468
1469 return 0;
1470}
1471
1472
1473/**
1474 * megaraid_queue_command - generic queue entry point for all LLDs
1475 * @scp : pointer to the scsi command to be executed
1476 * @done : callback routine to be called after the cmd has be completed
1477 *
1478 * Queue entry point for mailbox based controllers.
1479 */
1480static int
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001481megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001482{
1483 adapter_t *adapter;
1484 scb_t *scb;
1485 int if_busy;
1486
1487 adapter = SCP2ADAPTER(scp);
1488 scp->scsi_done = done;
1489 scp->result = 0;
1490
Linus Torvalds1da177e2005-04-16 15:20:36 -07001491 /*
1492 * Allocate and build a SCB request
1493 * if_busy flag will be set if megaraid_mbox_build_cmd() command could
1494 * not allocate scb. We will return non-zero status in that case.
1495 * NOTE: scb can be null even though certain commands completed
1496 * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, it would
1497 * return 0 in that case, and we would do the callback right away.
1498 */
1499 if_busy = 0;
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01001500 scb = megaraid_mbox_build_cmd(adapter, scp, &if_busy);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001501 if (!scb) { // command already completed
1502 done(scp);
1503 return 0;
1504 }
1505
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01001506 megaraid_mbox_runpendq(adapter, scb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001507 return if_busy;
1508}
1509
Linus Torvalds1da177e2005-04-16 15:20:36 -07001510/**
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001511 * megaraid_mbox_build_cmd - transform the mid-layer scsi commands
1512 * @adapter : controller's soft state
1513 * @scp : mid-layer scsi command pointer
1514 * @busy : set if request could not be completed because of lack of
Linus Torvalds1da177e2005-04-16 15:20:36 -07001515 * resources
1516 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001517 * Transform the mid-layer scsi command to megaraid firmware lingua.
1518 * Convert the command issued by mid-layer to format understood by megaraid
1519 * firmware. We also complete certain commands without sending them to firmware.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001520 */
1521static scb_t *
1522megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
1523{
1524 mraid_device_t *rdev = ADAP2RAIDDEV(adapter);
1525 int channel;
1526 int target;
1527 int islogical;
1528 mbox_ccb_t *ccb;
1529 mraid_passthru_t *pthru;
1530 mbox64_t *mbox64;
1531 mbox_t *mbox;
1532 scb_t *scb;
1533 char skip[] = "skipping";
1534 char scan[] = "scanning";
1535 char *ss;
1536
1537
1538 /*
1539 * Get the appropriate device map for the device this command is
1540 * intended for
1541 */
1542 MRAID_GET_DEVICE_MAP(adapter, scp, channel, target, islogical);
1543
1544 /*
1545 * Logical drive commands
1546 */
1547 if (islogical) {
1548 switch (scp->cmnd[0]) {
1549 case TEST_UNIT_READY:
1550 /*
1551 * Do we support clustering and is the support enabled
1552 * If no, return success always
1553 */
1554 if (!adapter->ha) {
1555 scp->result = (DID_OK << 16);
1556 return NULL;
1557 }
1558
1559 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1560 scp->result = (DID_ERROR << 16);
1561 *busy = 1;
1562 return NULL;
1563 }
1564
1565 scb->dma_direction = scp->sc_data_direction;
1566 scb->dev_channel = 0xFF;
1567 scb->dev_target = target;
1568 ccb = (mbox_ccb_t *)scb->ccb;
1569
1570 /*
1571 * The command id will be provided by the command
1572 * issuance routine
1573 */
1574 ccb->raw_mbox[0] = CLUSTER_CMD;
1575 ccb->raw_mbox[2] = RESERVATION_STATUS;
1576 ccb->raw_mbox[3] = target;
1577
1578 return scb;
1579
1580 case MODE_SENSE:
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001581 {
1582 struct scatterlist *sgl;
1583 caddr_t vaddr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001584
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001585 sgl = scsi_sglist(scp);
Jens Axboe45711f12007-10-22 21:19:53 +02001586 if (sg_page(sgl)) {
1587 vaddr = (caddr_t) sg_virt(&sgl[0]);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001588
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001589 memset(vaddr, 0, scp->cmnd[4]);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001590 }
1591 else {
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001592 con_log(CL_ANN, (KERN_WARNING
1593 "megaraid mailbox: invalid sg:%d\n",
1594 __LINE__));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001595 }
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001596 }
1597 scp->result = (DID_OK << 16);
1598 return NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001599
1600 case INQUIRY:
1601 /*
1602 * Display the channel scan for logical drives
1603 * Do not display scan for a channel if already done.
1604 */
1605 if (!(rdev->last_disp & (1L << SCP2CHANNEL(scp)))) {
1606
1607 con_log(CL_ANN, (KERN_INFO
1608 "scsi[%d]: scanning scsi channel %d",
1609 adapter->host->host_no,
1610 SCP2CHANNEL(scp)));
1611
1612 con_log(CL_ANN, (
1613 " [virtual] for logical drives\n"));
1614
1615 rdev->last_disp |= (1L << SCP2CHANNEL(scp));
1616 }
1617
Ju, Seokmannaa677bc2006-07-25 08:44:58 -06001618 if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) {
1619 scp->sense_buffer[0] = 0x70;
1620 scp->sense_buffer[2] = ILLEGAL_REQUEST;
1621 scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB;
1622 scp->result = CHECK_CONDITION << 1;
1623 return NULL;
1624 }
1625
Linus Torvalds1da177e2005-04-16 15:20:36 -07001626 /* Fall through */
1627
1628 case READ_CAPACITY:
1629 /*
1630 * Do not allow LUN > 0 for logical drives and
1631 * requests for more than 40 logical drives
1632 */
1633 if (SCP2LUN(scp)) {
1634 scp->result = (DID_BAD_TARGET << 16);
1635 return NULL;
1636 }
1637 if ((target % 0x80) >= MAX_LOGICAL_DRIVES_40LD) {
1638 scp->result = (DID_BAD_TARGET << 16);
1639 return NULL;
1640 }
1641
1642
1643 /* Allocate a SCB and initialize passthru */
1644 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1645 scp->result = (DID_ERROR << 16);
1646 *busy = 1;
1647 return NULL;
1648 }
1649
1650 ccb = (mbox_ccb_t *)scb->ccb;
1651 scb->dev_channel = 0xFF;
1652 scb->dev_target = target;
1653 pthru = ccb->pthru;
1654 mbox = ccb->mbox;
1655 mbox64 = ccb->mbox64;
1656
1657 pthru->timeout = 0;
1658 pthru->ars = 1;
1659 pthru->reqsenselen = 14;
1660 pthru->islogical = 1;
1661 pthru->logdrv = target;
1662 pthru->cdblen = scp->cmd_len;
1663 memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
1664
1665 mbox->cmd = MBOXCMD_PASSTHRU64;
1666 scb->dma_direction = scp->sc_data_direction;
1667
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09001668 pthru->dataxferlen = scsi_bufflen(scp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001669 pthru->dataxferaddr = ccb->sgl_dma_h;
1670 pthru->numsge = megaraid_mbox_mksgl(adapter,
1671 scb);
1672
1673 mbox->xferaddr = 0xFFFFFFFF;
1674 mbox64->xferaddr_lo = (uint32_t )ccb->pthru_dma_h;
1675 mbox64->xferaddr_hi = 0;
1676
1677 return scb;
1678
1679 case READ_6:
1680 case WRITE_6:
1681 case READ_10:
1682 case WRITE_10:
1683 case READ_12:
1684 case WRITE_12:
1685
1686 /*
1687 * Allocate a SCB and initialize mailbox
1688 */
1689 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1690 scp->result = (DID_ERROR << 16);
1691 *busy = 1;
1692 return NULL;
1693 }
1694 ccb = (mbox_ccb_t *)scb->ccb;
1695 scb->dev_channel = 0xFF;
1696 scb->dev_target = target;
1697 mbox = ccb->mbox;
1698 mbox64 = ccb->mbox64;
1699 mbox->logdrv = target;
1700
1701 /*
1702 * A little HACK: 2nd bit is zero for all scsi read
1703 * commands and is set for all scsi write commands
1704 */
1705 mbox->cmd = (scp->cmnd[0] & 0x02) ? MBOXCMD_LWRITE64:
1706 MBOXCMD_LREAD64 ;
1707
1708 /*
1709 * 6-byte READ(0x08) or WRITE(0x0A) cdb
1710 */
1711 if (scp->cmd_len == 6) {
1712 mbox->numsectors = (uint32_t)scp->cmnd[4];
1713 mbox->lba =
1714 ((uint32_t)scp->cmnd[1] << 16) |
1715 ((uint32_t)scp->cmnd[2] << 8) |
1716 (uint32_t)scp->cmnd[3];
1717
1718 mbox->lba &= 0x1FFFFF;
1719 }
1720
1721 /*
1722 * 10-byte READ(0x28) or WRITE(0x2A) cdb
1723 */
1724 else if (scp->cmd_len == 10) {
1725 mbox->numsectors =
1726 (uint32_t)scp->cmnd[8] |
1727 ((uint32_t)scp->cmnd[7] << 8);
1728 mbox->lba =
1729 ((uint32_t)scp->cmnd[2] << 24) |
1730 ((uint32_t)scp->cmnd[3] << 16) |
1731 ((uint32_t)scp->cmnd[4] << 8) |
1732 (uint32_t)scp->cmnd[5];
1733 }
1734
1735 /*
1736 * 12-byte READ(0xA8) or WRITE(0xAA) cdb
1737 */
1738 else if (scp->cmd_len == 12) {
1739 mbox->lba =
1740 ((uint32_t)scp->cmnd[2] << 24) |
1741 ((uint32_t)scp->cmnd[3] << 16) |
1742 ((uint32_t)scp->cmnd[4] << 8) |
1743 (uint32_t)scp->cmnd[5];
1744
1745 mbox->numsectors =
1746 ((uint32_t)scp->cmnd[6] << 24) |
1747 ((uint32_t)scp->cmnd[7] << 16) |
1748 ((uint32_t)scp->cmnd[8] << 8) |
1749 (uint32_t)scp->cmnd[9];
1750 }
1751 else {
1752 con_log(CL_ANN, (KERN_WARNING
1753 "megaraid: unsupported CDB length\n"));
1754
1755 megaraid_dealloc_scb(adapter, scb);
1756
1757 scp->result = (DID_ERROR << 16);
1758 return NULL;
1759 }
1760
1761 scb->dma_direction = scp->sc_data_direction;
1762
1763 // Calculate Scatter-Gather info
1764 mbox64->xferaddr_lo = (uint32_t )ccb->sgl_dma_h;
1765 mbox->numsge = megaraid_mbox_mksgl(adapter,
1766 scb);
1767 mbox->xferaddr = 0xFFFFFFFF;
1768 mbox64->xferaddr_hi = 0;
1769
1770 return scb;
1771
1772 case RESERVE:
1773 case RELEASE:
1774 /*
1775 * Do we support clustering and is the support enabled
1776 */
1777 if (!adapter->ha) {
1778 scp->result = (DID_BAD_TARGET << 16);
1779 return NULL;
1780 }
1781
1782 /*
1783 * Allocate a SCB and initialize mailbox
1784 */
1785 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1786 scp->result = (DID_ERROR << 16);
1787 *busy = 1;
1788 return NULL;
1789 }
1790
1791 ccb = (mbox_ccb_t *)scb->ccb;
1792 scb->dev_channel = 0xFF;
1793 scb->dev_target = target;
1794 ccb->raw_mbox[0] = CLUSTER_CMD;
1795 ccb->raw_mbox[2] = (scp->cmnd[0] == RESERVE) ?
1796 RESERVE_LD : RELEASE_LD;
1797
1798 ccb->raw_mbox[3] = target;
1799 scb->dma_direction = scp->sc_data_direction;
1800
1801 return scb;
1802
1803 default:
1804 scp->result = (DID_BAD_TARGET << 16);
1805 return NULL;
1806 }
1807 }
1808 else { // Passthru device commands
1809
1810 // Do not allow access to target id > 15 or LUN > 7
1811 if (target > 15 || SCP2LUN(scp) > 7) {
1812 scp->result = (DID_BAD_TARGET << 16);
1813 return NULL;
1814 }
1815
1816 // if fast load option was set and scan for last device is
1817 // over, reset the fast_load flag so that during a possible
1818 // next scan, devices can be made available
1819 if (rdev->fast_load && (target == 15) &&
1820 (SCP2CHANNEL(scp) == adapter->max_channel -1)) {
1821
1822 con_log(CL_ANN, (KERN_INFO
1823 "megaraid[%d]: physical device scan re-enabled\n",
1824 adapter->host->host_no));
1825 rdev->fast_load = 0;
1826 }
1827
1828 /*
1829 * Display the channel scan for physical devices
1830 */
1831 if (!(rdev->last_disp & (1L << SCP2CHANNEL(scp)))) {
1832
1833 ss = rdev->fast_load ? skip : scan;
1834
1835 con_log(CL_ANN, (KERN_INFO
1836 "scsi[%d]: %s scsi channel %d [Phy %d]",
1837 adapter->host->host_no, ss, SCP2CHANNEL(scp),
1838 channel));
1839
1840 con_log(CL_ANN, (
1841 " for non-raid devices\n"));
1842
1843 rdev->last_disp |= (1L << SCP2CHANNEL(scp));
1844 }
1845
1846 // disable channel sweep if fast load option given
1847 if (rdev->fast_load) {
1848 scp->result = (DID_BAD_TARGET << 16);
1849 return NULL;
1850 }
1851
1852 // Allocate a SCB and initialize passthru
1853 if (!(scb = megaraid_alloc_scb(adapter, scp))) {
1854 scp->result = (DID_ERROR << 16);
1855 *busy = 1;
1856 return NULL;
1857 }
1858
1859 ccb = (mbox_ccb_t *)scb->ccb;
1860 scb->dev_channel = channel;
1861 scb->dev_target = target;
1862 scb->dma_direction = scp->sc_data_direction;
1863 mbox = ccb->mbox;
1864 mbox64 = ccb->mbox64;
1865
1866 // Does this firmware support extended CDBs
1867 if (adapter->max_cdb_sz == 16) {
1868 mbox->cmd = MBOXCMD_EXTPTHRU;
1869
1870 megaraid_mbox_prepare_epthru(adapter, scb, scp);
1871
1872 mbox64->xferaddr_lo = (uint32_t)ccb->epthru_dma_h;
1873 mbox64->xferaddr_hi = 0;
1874 mbox->xferaddr = 0xFFFFFFFF;
1875 }
1876 else {
1877 mbox->cmd = MBOXCMD_PASSTHRU64;
1878
1879 megaraid_mbox_prepare_pthru(adapter, scb, scp);
1880
1881 mbox64->xferaddr_lo = (uint32_t)ccb->pthru_dma_h;
1882 mbox64->xferaddr_hi = 0;
1883 mbox->xferaddr = 0xFFFFFFFF;
1884 }
1885 return scb;
1886 }
1887
1888 // NOT REACHED
1889}
1890
1891
1892/**
1893 * megaraid_mbox_runpendq - execute commands queued in the pending queue
1894 * @adapter : controller's soft state
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001895 * @scb_q : SCB to be queued in the pending list
Linus Torvalds1da177e2005-04-16 15:20:36 -07001896 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001897 * Scan the pending list for commands which are not yet issued and try to
Linus Torvalds1da177e2005-04-16 15:20:36 -07001898 * post to the controller. The SCB can be a null pointer, which would indicate
1899 * no SCB to be queue, just try to execute the ones in the pending list.
1900 *
1901 * NOTE: We do not actually traverse the pending list. The SCBs are plucked
1902 * out from the head of the pending list. If it is successfully issued, the
1903 * next SCB is at the head now.
1904 */
1905static void
1906megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q)
1907{
1908 scb_t *scb;
1909 unsigned long flags;
1910
1911 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1912
1913 if (scb_q) {
1914 scb_q->state = SCB_PENDQ;
1915 list_add_tail(&scb_q->list, &adapter->pend_list);
1916 }
1917
1918 // if the adapter in not in quiescent mode, post the commands to FW
1919 if (adapter->quiescent) {
1920 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1921 return;
1922 }
1923
1924 while (!list_empty(&adapter->pend_list)) {
1925
1926 assert_spin_locked(PENDING_LIST_LOCK(adapter));
1927
1928 scb = list_entry(adapter->pend_list.next, scb_t, list);
1929
1930 // remove the scb from the pending list and try to
1931 // issue. If we are unable to issue it, put back in
1932 // the pending list and return
1933
1934 list_del_init(&scb->list);
1935
1936 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1937
1938 // if mailbox was busy, return SCB back to pending
1939 // list. Make sure to add at the head, since that's
1940 // where it would have been removed from
1941
1942 scb->state = SCB_ISSUED;
1943
1944 if (mbox_post_cmd(adapter, scb) != 0) {
1945
1946 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1947
1948 scb->state = SCB_PENDQ;
1949
1950 list_add(&scb->list, &adapter->pend_list);
1951
1952 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter),
1953 flags);
1954
1955 return;
1956 }
1957
1958 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
1959 }
1960
1961 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
1962
1963
1964 return;
1965}
1966
1967
1968/**
1969 * megaraid_mbox_prepare_pthru - prepare a command for physical devices
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001970 * @adapter : pointer to controller's soft state
1971 * @scb : scsi control block
1972 * @scp : scsi command from the mid-layer
Linus Torvalds1da177e2005-04-16 15:20:36 -07001973 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08001974 * Prepare a command for the scsi physical devices.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001975 */
1976static void
1977megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb,
1978 struct scsi_cmnd *scp)
1979{
1980 mbox_ccb_t *ccb;
1981 mraid_passthru_t *pthru;
1982 uint8_t channel;
1983 uint8_t target;
1984
1985 ccb = (mbox_ccb_t *)scb->ccb;
1986 pthru = ccb->pthru;
1987 channel = scb->dev_channel;
1988 target = scb->dev_target;
1989
1990 // 0=6sec, 1=60sec, 2=10min, 3=3hrs, 4=NO timeout
1991 pthru->timeout = 4;
1992 pthru->ars = 1;
1993 pthru->islogical = 0;
1994 pthru->channel = 0;
1995 pthru->target = (channel << 4) | target;
1996 pthru->logdrv = SCP2LUN(scp);
1997 pthru->reqsenselen = 14;
1998 pthru->cdblen = scp->cmd_len;
1999
2000 memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
2001
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09002002 if (scsi_bufflen(scp)) {
2003 pthru->dataxferlen = scsi_bufflen(scp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002004 pthru->dataxferaddr = ccb->sgl_dma_h;
2005 pthru->numsge = megaraid_mbox_mksgl(adapter, scb);
2006 }
2007 else {
2008 pthru->dataxferaddr = 0;
2009 pthru->dataxferlen = 0;
2010 pthru->numsge = 0;
2011 }
2012 return;
2013}
2014
2015
2016/**
2017 * megaraid_mbox_prepare_epthru - prepare a command for physical devices
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002018 * @adapter : pointer to controller's soft state
2019 * @scb : scsi control block
2020 * @scp : scsi command from the mid-layer
Linus Torvalds1da177e2005-04-16 15:20:36 -07002021 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002022 * Prepare a command for the scsi physical devices. This rountine prepares
2023 * commands for devices which can take extended CDBs (>10 bytes).
Linus Torvalds1da177e2005-04-16 15:20:36 -07002024 */
2025static void
2026megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb,
2027 struct scsi_cmnd *scp)
2028{
2029 mbox_ccb_t *ccb;
2030 mraid_epassthru_t *epthru;
2031 uint8_t channel;
2032 uint8_t target;
2033
2034 ccb = (mbox_ccb_t *)scb->ccb;
2035 epthru = ccb->epthru;
2036 channel = scb->dev_channel;
2037 target = scb->dev_target;
2038
2039 // 0=6sec, 1=60sec, 2=10min, 3=3hrs, 4=NO timeout
2040 epthru->timeout = 4;
2041 epthru->ars = 1;
2042 epthru->islogical = 0;
2043 epthru->channel = 0;
2044 epthru->target = (channel << 4) | target;
2045 epthru->logdrv = SCP2LUN(scp);
2046 epthru->reqsenselen = 14;
2047 epthru->cdblen = scp->cmd_len;
2048
2049 memcpy(epthru->cdb, scp->cmnd, scp->cmd_len);
2050
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09002051 if (scsi_bufflen(scp)) {
2052 epthru->dataxferlen = scsi_bufflen(scp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002053 epthru->dataxferaddr = ccb->sgl_dma_h;
2054 epthru->numsge = megaraid_mbox_mksgl(adapter, scb);
2055 }
2056 else {
2057 epthru->dataxferaddr = 0;
2058 epthru->dataxferlen = 0;
2059 epthru->numsge = 0;
2060 }
2061 return;
2062}
2063
2064
2065/**
2066 * megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002067 * @adapter : controller's soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07002068 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002069 * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the
Linus Torvalds1da177e2005-04-16 15:20:36 -07002070 * completed command and put them on the completed list for later processing.
2071 *
2072 * Returns: 1 if the interrupt is valid, 0 otherwise
2073 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08002074static int
Linus Torvalds1da177e2005-04-16 15:20:36 -07002075megaraid_ack_sequence(adapter_t *adapter)
2076{
2077 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
2078 mbox_t *mbox;
2079 scb_t *scb;
2080 uint8_t nstatus;
2081 uint8_t completed[MBOX_MAX_FIRMWARE_STATUS];
2082 struct list_head clist;
2083 int handled;
2084 uint32_t dword;
2085 unsigned long flags;
2086 int i, j;
2087
2088
2089 mbox = raid_dev->mbox;
2090
2091 // move the SCBs from the firmware completed array to our local list
2092 INIT_LIST_HEAD(&clist);
2093
2094 // loop till F/W has more commands for us to complete
2095 handled = 0;
2096 spin_lock_irqsave(MAILBOX_LOCK(raid_dev), flags);
2097 do {
2098 /*
2099 * Check if a valid interrupt is pending. If found, force the
2100 * interrupt line low.
2101 */
2102 dword = RDOUTDOOR(raid_dev);
2103 if (dword != 0x10001234) break;
2104
2105 handled = 1;
2106
2107 WROUTDOOR(raid_dev, 0x10001234);
2108
2109 nstatus = 0;
2110 // wait for valid numstatus to post
2111 for (i = 0; i < 0xFFFFF; i++) {
2112 if (mbox->numstatus != 0xFF) {
2113 nstatus = mbox->numstatus;
2114 break;
2115 }
2116 rmb();
2117 }
2118 mbox->numstatus = 0xFF;
2119
2120 adapter->outstanding_cmds -= nstatus;
2121
2122 for (i = 0; i < nstatus; i++) {
2123
2124 // wait for valid command index to post
2125 for (j = 0; j < 0xFFFFF; j++) {
2126 if (mbox->completed[i] != 0xFF) break;
2127 rmb();
2128 }
2129 completed[i] = mbox->completed[i];
2130 mbox->completed[i] = 0xFF;
2131
2132 if (completed[i] == 0xFF) {
2133 con_log(CL_ANN, (KERN_CRIT
2134 "megaraid: command posting timed out\n"));
2135
2136 BUG();
2137 continue;
2138 }
2139
2140 // Get SCB associated with this command id
2141 if (completed[i] >= MBOX_MAX_SCSI_CMDS) {
2142 // a cmm command
2143 scb = adapter->uscb_list + (completed[i] -
2144 MBOX_MAX_SCSI_CMDS);
2145 }
2146 else {
2147 // an os command
2148 scb = adapter->kscb_list + completed[i];
2149 }
2150
2151 scb->status = mbox->status;
2152 list_add_tail(&scb->list, &clist);
2153 }
2154
2155 // Acknowledge interrupt
2156 WRINDOOR(raid_dev, 0x02);
2157
2158 } while(1);
2159
2160 spin_unlock_irqrestore(MAILBOX_LOCK(raid_dev), flags);
2161
2162
2163 // put the completed commands in the completed list. DPC would
2164 // complete these commands later
2165 spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2166
2167 list_splice(&clist, &adapter->completed_list);
2168
2169 spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2170
2171
2172 // schedule the DPC if there is some work for it
2173 if (handled)
2174 tasklet_schedule(&adapter->dpc_h);
2175
2176 return handled;
2177}
2178
2179
2180/**
2181 * megaraid_isr - isr for memory based mailbox based controllers
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002182 * @irq : irq
2183 * @devp : pointer to our soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07002184 *
2185 * Interrupt service routine for memory-mapped mailbox controllers.
2186 */
2187static irqreturn_t
David Howells7d12e782006-10-05 14:55:46 +01002188megaraid_isr(int irq, void *devp)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002189{
2190 adapter_t *adapter = devp;
2191 int handled;
2192
2193 handled = megaraid_ack_sequence(adapter);
2194
2195 /* Loop through any pending requests */
2196 if (!adapter->quiescent) {
2197 megaraid_mbox_runpendq(adapter, NULL);
2198 }
2199
2200 return IRQ_RETVAL(handled);
2201}
2202
2203
2204/**
2205 * megaraid_mbox_sync_scb - sync kernel buffers
2206 * @adapter : controller's soft state
2207 * @scb : pointer to the resource packet
2208 *
2209 * DMA sync if required.
2210 */
Arjan van de Ven858119e2006-01-14 13:20:43 -08002211static void
Linus Torvalds1da177e2005-04-16 15:20:36 -07002212megaraid_mbox_sync_scb(adapter_t *adapter, scb_t *scb)
2213{
2214 mbox_ccb_t *ccb;
2215
2216 ccb = (mbox_ccb_t *)scb->ccb;
2217
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09002218 if (scb->dma_direction == PCI_DMA_FROMDEVICE)
2219 pci_dma_sync_sg_for_cpu(adapter->pdev,
2220 scsi_sglist(scb->scp),
2221 scsi_sg_count(scb->scp),
Linus Torvalds1da177e2005-04-16 15:20:36 -07002222 PCI_DMA_FROMDEVICE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002223
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09002224 scsi_dma_unmap(scb->scp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002225 return;
2226}
2227
2228
2229/**
2230 * megaraid_mbox_dpc - the tasklet to complete the commands from completed list
2231 * @devp : pointer to HBA soft state
2232 *
2233 * Pick up the commands from the completed list and send back to the owners.
2234 * This is a reentrant function and does not assume any locks are held while
2235 * it is being called.
2236 */
2237static void
2238megaraid_mbox_dpc(unsigned long devp)
2239{
2240 adapter_t *adapter = (adapter_t *)devp;
2241 mraid_device_t *raid_dev;
2242 struct list_head clist;
2243 struct scatterlist *sgl;
2244 scb_t *scb;
2245 scb_t *tmp;
2246 struct scsi_cmnd *scp;
2247 mraid_passthru_t *pthru;
2248 mraid_epassthru_t *epthru;
2249 mbox_ccb_t *ccb;
2250 int islogical;
2251 int pdev_index;
2252 int pdev_state;
2253 mbox_t *mbox;
2254 unsigned long flags;
2255 uint8_t c;
2256 int status;
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002257 uioc_t *kioc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002258
2259
2260 if (!adapter) return;
2261
2262 raid_dev = ADAP2RAIDDEV(adapter);
2263
2264 // move the SCBs from the completed list to our local list
2265 INIT_LIST_HEAD(&clist);
2266
2267 spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2268
2269 list_splice_init(&adapter->completed_list, &clist);
2270
2271 spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2272
2273
2274 list_for_each_entry_safe(scb, tmp, &clist, list) {
2275
2276 status = scb->status;
2277 scp = scb->scp;
2278 ccb = (mbox_ccb_t *)scb->ccb;
2279 pthru = ccb->pthru;
2280 epthru = ccb->epthru;
2281 mbox = ccb->mbox;
2282
2283 // Make sure f/w has completed a valid command
2284 if (scb->state != SCB_ISSUED) {
2285 con_log(CL_ANN, (KERN_CRIT
2286 "megaraid critical err: invalid command %d:%d:%p\n",
2287 scb->sno, scb->state, scp));
2288 BUG();
2289 continue; // Must never happen!
2290 }
2291
2292 // check for the management command and complete it right away
2293 if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
2294 scb->state = SCB_FREE;
2295 scb->status = status;
2296
2297 // remove from local clist
2298 list_del_init(&scb->list);
2299
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002300 kioc = (uioc_t *)scb->gp;
2301 kioc->status = 0;
2302
Linus Torvalds1da177e2005-04-16 15:20:36 -07002303 megaraid_mbox_mm_done(adapter, scb);
2304
2305 continue;
2306 }
2307
2308 // Was an abort issued for this command earlier
2309 if (scb->state & SCB_ABORT) {
2310 con_log(CL_ANN, (KERN_NOTICE
2311 "megaraid: aborted cmd %lx[%x] completed\n",
2312 scp->serial_number, scb->sno));
2313 }
2314
2315 /*
2316 * If the inquiry came of a disk drive which is not part of
2317 * any RAID array, expose it to the kernel. For this to be
2318 * enabled, user must set the "megaraid_expose_unconf_disks"
2319 * flag to 1 by specifying it on module parameter list.
2320 * This would enable data migration off drives from other
2321 * configurations.
2322 */
2323 islogical = MRAID_IS_LOGICAL(adapter, scp);
2324 if (scp->cmnd[0] == INQUIRY && status == 0 && islogical == 0
2325 && IS_RAID_CH(raid_dev, scb->dev_channel)) {
2326
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09002327 sgl = scsi_sglist(scp);
Jens Axboe45711f12007-10-22 21:19:53 +02002328 if (sg_page(sgl)) {
2329 c = *(unsigned char *) sg_virt(&sgl[0]);
FUJITA Tomonori32fbac22007-05-14 20:13:44 +09002330 } else {
2331 con_log(CL_ANN, (KERN_WARNING
2332 "megaraid mailbox: invalid sg:%d\n",
2333 __LINE__));
2334 c = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002335 }
2336
2337 if ((c & 0x1F ) == TYPE_DISK) {
2338 pdev_index = (scb->dev_channel * 16) +
2339 scb->dev_target;
2340 pdev_state =
2341 raid_dev->pdrv_state[pdev_index] & 0x0F;
2342
2343 if (pdev_state == PDRV_ONLINE ||
2344 pdev_state == PDRV_FAILED ||
2345 pdev_state == PDRV_RBLD ||
2346 pdev_state == PDRV_HOTSPARE ||
2347 megaraid_expose_unconf_disks == 0) {
2348
2349 status = 0xF0;
2350 }
2351 }
2352 }
2353
2354 // Convert MegaRAID status to Linux error code
2355 switch (status) {
2356
2357 case 0x00:
2358
2359 scp->result = (DID_OK << 16);
2360 break;
2361
2362 case 0x02:
2363
2364 /* set sense_buffer and result fields */
2365 if (mbox->cmd == MBOXCMD_PASSTHRU ||
2366 mbox->cmd == MBOXCMD_PASSTHRU64) {
2367
2368 memcpy(scp->sense_buffer, pthru->reqsensearea,
2369 14);
2370
2371 scp->result = DRIVER_SENSE << 24 |
2372 DID_OK << 16 | CHECK_CONDITION << 1;
2373 }
2374 else {
2375 if (mbox->cmd == MBOXCMD_EXTPTHRU) {
2376
2377 memcpy(scp->sense_buffer,
2378 epthru->reqsensearea, 14);
2379
2380 scp->result = DRIVER_SENSE << 24 |
2381 DID_OK << 16 |
2382 CHECK_CONDITION << 1;
2383 } else {
2384 scp->sense_buffer[0] = 0x70;
2385 scp->sense_buffer[2] = ABORTED_COMMAND;
2386 scp->result = CHECK_CONDITION << 1;
2387 }
2388 }
2389 break;
2390
2391 case 0x08:
2392
2393 scp->result = DID_BUS_BUSY << 16 | status;
2394 break;
2395
2396 default:
2397
2398 /*
2399 * If TEST_UNIT_READY fails, we know RESERVATION_STATUS
2400 * failed
2401 */
2402 if (scp->cmnd[0] == TEST_UNIT_READY) {
2403 scp->result = DID_ERROR << 16 |
2404 RESERVATION_CONFLICT << 1;
2405 }
2406 else
2407 /*
2408 * Error code returned is 1 if Reserve or Release
2409 * failed or the input parameter is invalid
2410 */
2411 if (status == 1 && (scp->cmnd[0] == RESERVE ||
2412 scp->cmnd[0] == RELEASE)) {
2413
2414 scp->result = DID_ERROR << 16 |
2415 RESERVATION_CONFLICT << 1;
2416 }
2417 else {
2418 scp->result = DID_BAD_TARGET << 16 | status;
2419 }
2420 }
2421
2422 // print a debug message for all failed commands
2423 if (status) {
2424 megaraid_mbox_display_scb(adapter, scb);
2425 }
2426
2427 // Free our internal resources and call the mid-layer callback
2428 // routine
2429 megaraid_mbox_sync_scb(adapter, scb);
2430
2431 // remove from local clist
2432 list_del_init(&scb->list);
2433
2434 // put back in free list
2435 megaraid_dealloc_scb(adapter, scb);
2436
2437 // send the scsi packet back to kernel
Linus Torvalds1da177e2005-04-16 15:20:36 -07002438 scp->scsi_done(scp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002439 }
2440
2441 return;
2442}
2443
2444
2445/**
2446 * megaraid_abort_handler - abort the scsi command
2447 * @scp : command to be aborted
2448 *
2449 * Abort a previous SCSI request. Only commands on the pending list can be
2450 * aborted. All the commands issued to the F/W must complete.
2451 **/
2452static int
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01002453megaraid_abort_handler(struct scsi_cmnd *scp)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002454{
2455 adapter_t *adapter;
2456 mraid_device_t *raid_dev;
2457 scb_t *scb;
2458 scb_t *tmp;
2459 int found;
2460 unsigned long flags;
2461 int i;
2462
2463
2464 adapter = SCP2ADAPTER(scp);
2465 raid_dev = ADAP2RAIDDEV(adapter);
2466
Linus Torvalds1da177e2005-04-16 15:20:36 -07002467 con_log(CL_ANN, (KERN_WARNING
2468 "megaraid: aborting-%ld cmd=%x <c=%d t=%d l=%d>\n",
2469 scp->serial_number, scp->cmnd[0], SCP2CHANNEL(scp),
2470 SCP2TARGET(scp), SCP2LUN(scp)));
2471
2472 // If FW has stopped responding, simply return failure
2473 if (raid_dev->hw_error) {
2474 con_log(CL_ANN, (KERN_NOTICE
2475 "megaraid: hw error, not aborting\n"));
2476 return FAILED;
2477 }
2478
2479 // There might a race here, where the command was completed by the
2480 // firmware and now it is on the completed list. Before we could
2481 // complete the command to the kernel in dpc, the abort came.
2482 // Find out if this is the case to avoid the race.
2483 scb = NULL;
2484 spin_lock_irqsave(COMPLETED_LIST_LOCK(adapter), flags);
2485 list_for_each_entry_safe(scb, tmp, &adapter->completed_list, list) {
2486
2487 if (scb->scp == scp) { // Found command
2488
2489 list_del_init(&scb->list); // from completed list
2490
2491 con_log(CL_ANN, (KERN_WARNING
2492 "megaraid: %ld:%d[%d:%d], abort from completed list\n",
2493 scp->serial_number, scb->sno,
2494 scb->dev_channel, scb->dev_target));
2495
2496 scp->result = (DID_ABORT << 16);
2497 scp->scsi_done(scp);
2498
2499 megaraid_dealloc_scb(adapter, scb);
2500
2501 spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter),
2502 flags);
2503
2504 return SUCCESS;
2505 }
2506 }
2507 spin_unlock_irqrestore(COMPLETED_LIST_LOCK(adapter), flags);
2508
2509
2510 // Find out if this command is still on the pending list. If it is and
2511 // was never issued, abort and return success. If the command is owned
2512 // by the firmware, we must wait for it to complete by the FW.
2513 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
2514 list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
2515
2516 if (scb->scp == scp) { // Found command
2517
2518 list_del_init(&scb->list); // from pending list
2519
2520 ASSERT(!(scb->state & SCB_ISSUED));
2521
2522 con_log(CL_ANN, (KERN_WARNING
2523 "megaraid abort: %ld[%d:%d], driver owner\n",
2524 scp->serial_number, scb->dev_channel,
2525 scb->dev_target));
2526
2527 scp->result = (DID_ABORT << 16);
2528 scp->scsi_done(scp);
2529
2530 megaraid_dealloc_scb(adapter, scb);
2531
2532 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter),
2533 flags);
2534
2535 return SUCCESS;
2536 }
2537 }
2538 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
2539
2540
2541 // Check do we even own this command, in which case this would be
2542 // owned by the firmware. The only way to locate the FW scb is to
2543 // traverse through the list of all SCB, since driver does not
2544 // maintain these SCBs on any list
2545 found = 0;
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01002546 spin_lock_irq(&adapter->lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002547 for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
2548 scb = adapter->kscb_list + i;
2549
2550 if (scb->scp == scp) {
2551
2552 found = 1;
2553
2554 if (!(scb->state & SCB_ISSUED)) {
2555 con_log(CL_ANN, (KERN_WARNING
2556 "megaraid abort: %ld%d[%d:%d], invalid state\n",
2557 scp->serial_number, scb->sno, scb->dev_channel,
2558 scb->dev_target));
2559 BUG();
2560 }
2561 else {
2562 con_log(CL_ANN, (KERN_WARNING
2563 "megaraid abort: %ld:%d[%d:%d], fw owner\n",
2564 scp->serial_number, scb->sno, scb->dev_channel,
2565 scb->dev_target));
2566 }
2567 }
2568 }
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01002569 spin_unlock_irq(&adapter->lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002570
2571 if (!found) {
2572 con_log(CL_ANN, (KERN_WARNING
2573 "megaraid abort: scsi cmd:%ld, do now own\n",
2574 scp->serial_number));
2575
2576 // FIXME: Should there be a callback for this command?
2577 return SUCCESS;
2578 }
2579
2580 // We cannot actually abort a command owned by firmware, return
2581 // failure and wait for reset. In host reset handler, we will find out
2582 // if the HBA is still live
2583 return FAILED;
2584}
2585
Linus Torvalds1da177e2005-04-16 15:20:36 -07002586/**
2587 * megaraid_reset_handler - device reset hadler for mailbox based driver
2588 * @scp : reference command
2589 *
2590 * Reset handler for the mailbox based controller. First try to find out if
2591 * the FW is still live, in which case the outstanding commands counter mut go
2592 * down to 0. If that happens, also issue the reservation reset command to
2593 * relinquish (possible) reservations on the logical drives connected to this
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002594 * host.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002595 **/
2596static int
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01002597megaraid_reset_handler(struct scsi_cmnd *scp)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002598{
2599 adapter_t *adapter;
2600 scb_t *scb;
2601 scb_t *tmp;
2602 mraid_device_t *raid_dev;
2603 unsigned long flags;
2604 uint8_t raw_mbox[sizeof(mbox_t)];
2605 int rval;
2606 int recovery_window;
2607 int recovering;
2608 int i;
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002609 uioc_t *kioc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002610
2611 adapter = SCP2ADAPTER(scp);
2612 raid_dev = ADAP2RAIDDEV(adapter);
2613
Linus Torvalds1da177e2005-04-16 15:20:36 -07002614 // return failure if adapter is not responding
2615 if (raid_dev->hw_error) {
2616 con_log(CL_ANN, (KERN_NOTICE
2617 "megaraid: hw error, cannot reset\n"));
2618 return FAILED;
2619 }
2620
2621
2622 // Under exceptional conditions, FW can take up to 3 minutes to
2623 // complete command processing. Wait for additional 2 minutes for the
2624 // pending commands counter to go down to 0. If it doesn't, let the
2625 // controller be marked offline
2626 // Also, reset all the commands currently owned by the driver
2627 spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
2628 list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002629 list_del_init(&scb->list); // from pending list
2630
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002631 if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
2632 con_log(CL_ANN, (KERN_WARNING
2633 "megaraid: IOCTL packet with %d[%d:%d] being reset\n",
2634 scb->sno, scb->dev_channel, scb->dev_target));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002635
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002636 scb->status = -1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002637
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002638 kioc = (uioc_t *)scb->gp;
2639 kioc->status = -EFAULT;
2640
2641 megaraid_mbox_mm_done(adapter, scb);
2642 } else {
2643 if (scb->scp == scp) { // Found command
2644 con_log(CL_ANN, (KERN_WARNING
2645 "megaraid: %ld:%d[%d:%d], reset from pending list\n",
2646 scp->serial_number, scb->sno,
2647 scb->dev_channel, scb->dev_target));
2648 } else {
2649 con_log(CL_ANN, (KERN_WARNING
2650 "megaraid: IO packet with %d[%d:%d] being reset\n",
2651 scb->sno, scb->dev_channel, scb->dev_target));
2652 }
2653
2654 scb->scp->result = (DID_RESET << 16);
2655 scb->scp->scsi_done(scb->scp);
2656
2657 megaraid_dealloc_scb(adapter, scb);
2658 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002659 }
2660 spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
2661
2662 if (adapter->outstanding_cmds) {
2663 con_log(CL_ANN, (KERN_NOTICE
2664 "megaraid: %d outstanding commands. Max wait %d sec\n",
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002665 adapter->outstanding_cmds,
2666 (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT)));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002667 }
2668
Linus Torvalds1da177e2005-04-16 15:20:36 -07002669 recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
2670
2671 recovering = adapter->outstanding_cmds;
2672
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002673 for (i = 0; i < recovery_window; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002674
2675 megaraid_ack_sequence(adapter);
2676
2677 // print a message once every 5 seconds only
2678 if (!(i % 5)) {
2679 con_log(CL_ANN, (
2680 "megaraid mbox: Wait for %d commands to complete:%d\n",
2681 adapter->outstanding_cmds,
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002682 (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002683 }
2684
2685 // bailout if no recovery happended in reset time
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002686 if (adapter->outstanding_cmds == 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002687 break;
2688 }
2689
2690 msleep(1000);
2691 }
2692
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01002693 spin_lock(&adapter->lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002694
2695 // If still outstanding commands, bail out
2696 if (adapter->outstanding_cmds) {
2697 con_log(CL_ANN, (KERN_WARNING
2698 "megaraid mbox: critical hardware error!\n"));
2699
2700 raid_dev->hw_error = 1;
2701
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01002702 rval = FAILED;
2703 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002704 }
2705 else {
2706 con_log(CL_ANN, (KERN_NOTICE
2707 "megaraid mbox: reset sequence completed sucessfully\n"));
2708 }
2709
2710
2711 // If the controller supports clustering, reset reservations
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01002712 if (!adapter->ha) {
2713 rval = SUCCESS;
2714 goto out;
2715 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002716
2717 // clear reservations if any
2718 raw_mbox[0] = CLUSTER_CMD;
2719 raw_mbox[2] = RESET_RESERVATIONS;
2720
2721 rval = SUCCESS;
2722 if (mbox_post_sync_cmd_fast(adapter, raw_mbox) == 0) {
2723 con_log(CL_ANN,
2724 (KERN_INFO "megaraid: reservation reset\n"));
2725 }
2726 else {
2727 rval = FAILED;
2728 con_log(CL_ANN, (KERN_WARNING
2729 "megaraid: reservation reset failed\n"));
2730 }
2731
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01002732 out:
2733 spin_unlock_irq(&adapter->lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002734 return rval;
2735}
2736
Linus Torvalds1da177e2005-04-16 15:20:36 -07002737/*
2738 * START: internal commands library
2739 *
2740 * This section of the driver has the common routine used by the driver and
2741 * also has all the FW routines
2742 */
2743
2744/**
2745 * mbox_post_sync_cmd() - blocking command to the mailbox based controllers
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002746 * @adapter : controller's soft state
2747 * @raw_mbox : the mailbox
Linus Torvalds1da177e2005-04-16 15:20:36 -07002748 *
2749 * Issue a scb in synchronous and non-interrupt mode for mailbox based
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002750 * controllers.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002751 */
2752static int
2753mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[])
2754{
2755 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
2756 mbox64_t *mbox64;
2757 mbox_t *mbox;
2758 uint8_t status;
2759 int i;
2760
2761
2762 mbox64 = raid_dev->mbox64;
2763 mbox = raid_dev->mbox;
2764
2765 /*
2766 * Wait until mailbox is free
2767 */
2768 if (megaraid_busywait_mbox(raid_dev) != 0)
2769 goto blocked_mailbox;
2770
2771 /*
2772 * Copy mailbox data into host structure
2773 */
2774 memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
2775 mbox->cmdid = 0xFE;
2776 mbox->busy = 1;
2777 mbox->poll = 0;
2778 mbox->ack = 0;
2779 mbox->numstatus = 0xFF;
2780 mbox->status = 0xFF;
2781
2782 wmb();
2783 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
2784
2785 // wait for maximum 1 second for status to post. If the status is not
2786 // available within 1 second, assume FW is initializing and wait
2787 // for an extended amount of time
2788 if (mbox->numstatus == 0xFF) { // status not yet available
Alexey Dobriyan53b35312006-03-24 03:16:13 -08002789 udelay(25);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002790
2791 for (i = 0; mbox->numstatus == 0xFF && i < 1000; i++) {
2792 rmb();
2793 msleep(1);
2794 }
2795
2796
2797 if (i == 1000) {
2798 con_log(CL_ANN, (KERN_NOTICE
2799 "megaraid mailbox: wait for FW to boot "));
2800
2801 for (i = 0; (mbox->numstatus == 0xFF) &&
2802 (i < MBOX_RESET_WAIT); i++) {
2803 rmb();
2804 con_log(CL_ANN, ("\b\b\b\b\b[%03d]",
2805 MBOX_RESET_WAIT - i));
2806 msleep(1000);
2807 }
2808
2809 if (i == MBOX_RESET_WAIT) {
2810
2811 con_log(CL_ANN, (
2812 "\nmegaraid mailbox: status not available\n"));
2813
2814 return -1;
2815 }
2816 con_log(CL_ANN, ("\b\b\b\b\b[ok] \n"));
2817 }
2818 }
2819
2820 // wait for maximum 1 second for poll semaphore
2821 if (mbox->poll != 0x77) {
2822 udelay(25);
2823
2824 for (i = 0; (mbox->poll != 0x77) && (i < 1000); i++) {
2825 rmb();
2826 msleep(1);
2827 }
2828
2829 if (i == 1000) {
2830 con_log(CL_ANN, (KERN_WARNING
2831 "megaraid mailbox: could not get poll semaphore\n"));
2832 return -1;
2833 }
2834 }
2835
2836 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x2);
2837 wmb();
2838
2839 // wait for maximum 1 second for acknowledgement
2840 if (RDINDOOR(raid_dev) & 0x2) {
2841 udelay(25);
2842
2843 for (i = 0; (RDINDOOR(raid_dev) & 0x2) && (i < 1000); i++) {
2844 rmb();
2845 msleep(1);
2846 }
2847
2848 if (i == 1000) {
2849 con_log(CL_ANN, (KERN_WARNING
2850 "megaraid mailbox: could not acknowledge\n"));
2851 return -1;
2852 }
2853 }
2854 mbox->poll = 0;
2855 mbox->ack = 0x77;
2856
2857 status = mbox->status;
2858
2859 // invalidate the completed command id array. After command
2860 // completion, firmware would write the valid id.
2861 mbox->numstatus = 0xFF;
2862 mbox->status = 0xFF;
2863 for (i = 0; i < MBOX_MAX_FIRMWARE_STATUS; i++) {
2864 mbox->completed[i] = 0xFF;
2865 }
2866
2867 return status;
2868
2869blocked_mailbox:
2870
2871 con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n") );
2872 return -1;
2873}
2874
2875
2876/**
2877 * mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002878 * @adapter : controller's soft state
2879 * @raw_mbox : the mailbox
Linus Torvalds1da177e2005-04-16 15:20:36 -07002880 *
2881 * Issue a scb in synchronous and non-interrupt mode for mailbox based
2882 * controllers. This is a faster version of the synchronous command and
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002883 * therefore can be called in interrupt-context as well.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002884 */
2885static int
2886mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
2887{
2888 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
2889 mbox_t *mbox;
2890 long i;
2891
2892
2893 mbox = raid_dev->mbox;
2894
2895 // return immediately if the mailbox is busy
2896 if (mbox->busy) return -1;
2897
2898 // Copy mailbox data into host structure
2899 memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 14);
2900 mbox->cmdid = 0xFE;
2901 mbox->busy = 1;
2902 mbox->poll = 0;
2903 mbox->ack = 0;
2904 mbox->numstatus = 0xFF;
2905 mbox->status = 0xFF;
2906
2907 wmb();
2908 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
2909
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002910 for (i = 0; i < MBOX_SYNC_WAIT_CNT; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002911 if (mbox->numstatus != 0xFF) break;
Ju, Seokmanned7e8ef2005-11-17 13:17:25 -05002912 rmb();
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002913 udelay(MBOX_SYNC_DELAY_200);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002914 }
2915
Ju, Seokmannc005fb42006-04-27 02:33:06 -07002916 if (i == MBOX_SYNC_WAIT_CNT) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002917 // We may need to re-calibrate the counter
2918 con_log(CL_ANN, (KERN_CRIT
2919 "megaraid: fast sync command timed out\n"));
2920 }
2921
2922 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x2);
2923 wmb();
2924
2925 return mbox->status;
2926}
2927
2928
2929/**
2930 * megaraid_busywait_mbox() - Wait until the controller's mailbox is available
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002931 * @raid_dev : RAID device (HBA) soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07002932 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002933 * Wait until the controller's mailbox is available to accept more commands.
2934 * Wait for at most 1 second.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002935 */
2936static int
2937megaraid_busywait_mbox(mraid_device_t *raid_dev)
2938{
2939 mbox_t *mbox = raid_dev->mbox;
2940 int i = 0;
2941
2942 if (mbox->busy) {
2943 udelay(25);
2944 for (i = 0; mbox->busy && i < 1000; i++)
2945 msleep(1);
2946 }
2947
2948 if (i < 1000) return 0;
2949 else return -1;
2950}
2951
2952
2953/**
2954 * megaraid_mbox_product_info - some static information about the controller
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002955 * @adapter : our soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07002956 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08002957 * Issue commands to the controller to grab some parameters required by our
Linus Torvalds1da177e2005-04-16 15:20:36 -07002958 * caller.
2959 */
2960static int
2961megaraid_mbox_product_info(adapter_t *adapter)
2962{
2963 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
2964 mbox_t *mbox;
2965 uint8_t raw_mbox[sizeof(mbox_t)];
2966 mraid_pinfo_t *pinfo;
2967 dma_addr_t pinfo_dma_h;
2968 mraid_inquiry3_t *mraid_inq3;
2969 int i;
2970
2971
2972 memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
2973 mbox = (mbox_t *)raw_mbox;
2974
2975 /*
2976 * Issue an ENQUIRY3 command to find out certain adapter parameters,
2977 * e.g., max channels, max commands etc.
2978 */
2979 pinfo = pci_alloc_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
2980 &pinfo_dma_h);
2981
2982 if (pinfo == NULL) {
2983 con_log(CL_ANN, (KERN_WARNING
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07002984 "megaraid: out of memory, %s %d\n", __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002985 __LINE__));
2986
2987 return -1;
2988 }
2989 memset(pinfo, 0, sizeof(mraid_pinfo_t));
2990
2991 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
2992 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
2993
2994 raw_mbox[0] = FC_NEW_CONFIG;
2995 raw_mbox[2] = NC_SUBOP_ENQUIRY3;
2996 raw_mbox[3] = ENQ3_GET_SOLICITED_FULL;
2997
2998 // Issue the command
2999 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3000
3001 con_log(CL_ANN, (KERN_WARNING "megaraid: Inquiry3 failed\n"));
3002
3003 pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
3004 pinfo, pinfo_dma_h);
3005
3006 return -1;
3007 }
3008
3009 /*
3010 * Collect information about state of each physical drive
3011 * attached to the controller. We will expose all the disks
3012 * which are not part of RAID
3013 */
3014 mraid_inq3 = (mraid_inquiry3_t *)adapter->ibuf;
3015 for (i = 0; i < MBOX_MAX_PHYSICAL_DRIVES; i++) {
3016 raid_dev->pdrv_state[i] = mraid_inq3->pdrv_state[i];
3017 }
3018
3019 /*
3020 * Get product info for information like number of channels,
3021 * maximum commands supported.
3022 */
3023 memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3024 mbox->xferaddr = (uint32_t)pinfo_dma_h;
3025
3026 raw_mbox[0] = FC_NEW_CONFIG;
3027 raw_mbox[2] = NC_SUBOP_PRODUCT_INFO;
3028
3029 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3030
3031 con_log(CL_ANN, (KERN_WARNING
3032 "megaraid: product info failed\n"));
3033
3034 pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t),
3035 pinfo, pinfo_dma_h);
3036
3037 return -1;
3038 }
3039
3040 /*
3041 * Setup some parameters for host, as required by our caller
3042 */
3043 adapter->max_channel = pinfo->nchannels;
3044
3045 /*
3046 * we will export all the logical drives on a single channel.
3047 * Add 1 since inquires do not come for inititor ID
3048 */
3049 adapter->max_target = MAX_LOGICAL_DRIVES_40LD + 1;
3050 adapter->max_lun = 8; // up to 8 LUNs for non-disk devices
3051
3052 /*
3053 * These are the maximum outstanding commands for the scsi-layer
3054 */
3055 adapter->max_cmds = MBOX_MAX_SCSI_CMDS;
3056
3057 memset(adapter->fw_version, 0, VERSION_SIZE);
3058 memset(adapter->bios_version, 0, VERSION_SIZE);
3059
3060 memcpy(adapter->fw_version, pinfo->fw_version, 4);
3061 adapter->fw_version[4] = 0;
3062
3063 memcpy(adapter->bios_version, pinfo->bios_version, 4);
3064 adapter->bios_version[4] = 0;
3065
3066 con_log(CL_ANN, (KERN_NOTICE
3067 "megaraid: fw version:[%s] bios version:[%s]\n",
3068 adapter->fw_version, adapter->bios_version));
3069
3070 pci_free_consistent(adapter->pdev, sizeof(mraid_pinfo_t), pinfo,
3071 pinfo_dma_h);
3072
3073 return 0;
3074}
3075
3076
3077
3078/**
3079 * megaraid_mbox_extended_cdb - check for support for extended CDBs
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003080 * @adapter : soft state for the controller
Linus Torvalds1da177e2005-04-16 15:20:36 -07003081 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003082 * This routine check whether the controller in question supports extended
3083 * ( > 10 bytes ) CDBs.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003084 */
3085static int
3086megaraid_mbox_extended_cdb(adapter_t *adapter)
3087{
3088 mbox_t *mbox;
3089 uint8_t raw_mbox[sizeof(mbox_t)];
3090 int rval;
3091
3092 mbox = (mbox_t *)raw_mbox;
3093
3094 memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3095 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3096
3097 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3098
3099 raw_mbox[0] = MAIN_MISC_OPCODE;
3100 raw_mbox[2] = SUPPORT_EXT_CDB;
3101
3102 /*
3103 * Issue the command
3104 */
3105 rval = 0;
3106 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3107 rval = -1;
3108 }
3109
3110 return rval;
3111}
3112
3113
3114/**
3115 * megaraid_mbox_support_ha - Do we support clustering
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003116 * @adapter : soft state for the controller
3117 * @init_id : ID of the initiator
Linus Torvalds1da177e2005-04-16 15:20:36 -07003118 *
3119 * Determine if the firmware supports clustering and the ID of the initiator.
3120 */
3121static int
3122megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id)
3123{
3124 mbox_t *mbox;
3125 uint8_t raw_mbox[sizeof(mbox_t)];
3126 int rval;
3127
3128
3129 mbox = (mbox_t *)raw_mbox;
3130
3131 memset((caddr_t)raw_mbox, 0, sizeof(raw_mbox));
3132
3133 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3134
3135 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3136
3137 raw_mbox[0] = GET_TARGET_ID;
3138
3139 // Issue the command
3140 *init_id = 7;
3141 rval = -1;
3142 if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3143
3144 *init_id = *(uint8_t *)adapter->ibuf;
3145
3146 con_log(CL_ANN, (KERN_INFO
3147 "megaraid: cluster firmware, initiator ID: %d\n",
3148 *init_id));
3149
3150 rval = 0;
3151 }
3152
3153 return rval;
3154}
3155
3156
3157/**
3158 * megaraid_mbox_support_random_del - Do we support random deletion
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003159 * @adapter : soft state for the controller
Linus Torvalds1da177e2005-04-16 15:20:36 -07003160 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003161 * Determine if the firmware supports random deletion.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003162 * Return: 1 is operation supported, 0 otherwise
3163 */
3164static int
3165megaraid_mbox_support_random_del(adapter_t *adapter)
3166{
3167 mbox_t *mbox;
3168 uint8_t raw_mbox[sizeof(mbox_t)];
3169 int rval;
3170
Hannes Reinecke69cd39e92008-04-18 13:57:20 -07003171 /*
3172 * Newer firmware on Dell CERC expect a different
3173 * random deletion handling, so disable it.
3174 */
3175 if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI &&
3176 adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 &&
3177 adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
3178 adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH &&
3179 (adapter->fw_version[0] > '6' ||
3180 (adapter->fw_version[0] == '6' &&
3181 adapter->fw_version[2] > '6') ||
3182 (adapter->fw_version[0] == '6'
3183 && adapter->fw_version[2] == '6'
3184 && adapter->fw_version[3] > '1'))) {
3185 con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n"));
3186 return 0;
3187 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07003188
3189 mbox = (mbox_t *)raw_mbox;
3190
3191 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3192
3193 raw_mbox[0] = FC_DEL_LOGDRV;
3194 raw_mbox[2] = OP_SUP_DEL_LOGDRV;
3195
3196 // Issue the command
3197 rval = 0;
3198 if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3199
3200 con_log(CL_DLEVEL1, ("megaraid: supports random deletion\n"));
3201
3202 rval = 1;
3203 }
3204
3205 return rval;
3206}
3207
3208
3209/**
3210 * megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003211 * @adapter : soft state for the controller
Linus Torvalds1da177e2005-04-16 15:20:36 -07003212 *
3213 * Find out the maximum number of scatter-gather elements supported by the
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003214 * firmware.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003215 */
3216static int
3217megaraid_mbox_get_max_sg(adapter_t *adapter)
3218{
3219 mbox_t *mbox;
3220 uint8_t raw_mbox[sizeof(mbox_t)];
3221 int nsg;
3222
3223
3224 mbox = (mbox_t *)raw_mbox;
3225
3226 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3227
3228 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3229
3230 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3231
3232 raw_mbox[0] = MAIN_MISC_OPCODE;
3233 raw_mbox[2] = GET_MAX_SG_SUPPORT;
3234
3235 // Issue the command
3236 if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3237 nsg = *(uint8_t *)adapter->ibuf;
3238 }
3239 else {
3240 nsg = MBOX_DEFAULT_SG_SIZE;
3241 }
3242
3243 if (nsg > MBOX_MAX_SG_SIZE) nsg = MBOX_MAX_SG_SIZE;
3244
3245 return nsg;
3246}
3247
3248
3249/**
3250 * megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003251 * @adapter : soft state for the controller
Linus Torvalds1da177e2005-04-16 15:20:36 -07003252 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003253 * Enumerate the RAID and SCSI channels for ROMB platforms so that channels
3254 * can be exported as regular SCSI channels.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003255 */
3256static void
3257megaraid_mbox_enum_raid_scsi(adapter_t *adapter)
3258{
3259 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3260 mbox_t *mbox;
3261 uint8_t raw_mbox[sizeof(mbox_t)];
3262
3263
3264 mbox = (mbox_t *)raw_mbox;
3265
3266 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3267
3268 mbox->xferaddr = (uint32_t)adapter->ibuf_dma_h;
3269
3270 memset((void *)adapter->ibuf, 0, MBOX_IBUF_SIZE);
3271
3272 raw_mbox[0] = CHNL_CLASS;
3273 raw_mbox[2] = GET_CHNL_CLASS;
3274
3275 // Issue the command. If the command fails, all channels are RAID
3276 // channels
3277 raid_dev->channel_class = 0xFF;
3278 if (mbox_post_sync_cmd(adapter, raw_mbox) == 0) {
3279 raid_dev->channel_class = *(uint8_t *)adapter->ibuf;
3280 }
3281
3282 return;
3283}
3284
3285
3286/**
3287 * megaraid_mbox_flush_cache - flush adapter and disks cache
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003288 * @adapter : soft state for the controller
Linus Torvalds1da177e2005-04-16 15:20:36 -07003289 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003290 * Flush adapter cache followed by disks cache.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003291 */
3292static void
3293megaraid_mbox_flush_cache(adapter_t *adapter)
3294{
3295 mbox_t *mbox;
3296 uint8_t raw_mbox[sizeof(mbox_t)];
3297
3298
3299 mbox = (mbox_t *)raw_mbox;
3300
3301 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3302
3303 raw_mbox[0] = FLUSH_ADAPTER;
3304
3305 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3306 con_log(CL_ANN, ("megaraid: flush adapter failed\n"));
3307 }
3308
3309 raw_mbox[0] = FLUSH_SYSTEM;
3310
3311 if (mbox_post_sync_cmd(adapter, raw_mbox) != 0) {
3312 con_log(CL_ANN, ("megaraid: flush disks cache failed\n"));
3313 }
3314
3315 return;
3316}
3317
3318
3319/**
Sumant Patrocd96d962007-01-05 07:10:09 -08003320 * megaraid_mbox_fire_sync_cmd - fire the sync cmd
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003321 * @adapter : soft state for the controller
Sumant Patrocd96d962007-01-05 07:10:09 -08003322 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003323 * Clears the pending cmds in FW and reinits its RAID structs.
Sumant Patrocd96d962007-01-05 07:10:09 -08003324 */
3325static int
3326megaraid_mbox_fire_sync_cmd(adapter_t *adapter)
3327{
3328 mbox_t *mbox;
3329 uint8_t raw_mbox[sizeof(mbox_t)];
3330 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3331 mbox64_t *mbox64;
3332 int status = 0;
3333 int i;
3334 uint32_t dword;
3335
3336 mbox = (mbox_t *)raw_mbox;
3337
3338 memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
3339
3340 raw_mbox[0] = 0xFF;
3341
3342 mbox64 = raid_dev->mbox64;
3343 mbox = raid_dev->mbox;
3344
3345 /* Wait until mailbox is free */
3346 if (megaraid_busywait_mbox(raid_dev) != 0) {
3347 status = 1;
3348 goto blocked_mailbox;
3349 }
3350
3351 /* Copy mailbox data into host structure */
3352 memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
3353 mbox->cmdid = 0xFE;
3354 mbox->busy = 1;
3355 mbox->poll = 0;
3356 mbox->ack = 0;
3357 mbox->numstatus = 0;
3358 mbox->status = 0;
3359
3360 wmb();
3361 WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
3362
3363 /* Wait for maximum 1 min for status to post.
3364 * If the Firmware SUPPORTS the ABOVE COMMAND,
3365 * mbox->cmd will be set to 0
3366 * else
3367 * the firmware will reject the command with
3368 * mbox->numstatus set to 1
3369 */
3370
3371 i = 0;
3372 status = 0;
3373 while (!mbox->numstatus && mbox->cmd == 0xFF) {
3374 rmb();
3375 msleep(1);
3376 i++;
3377 if (i > 1000 * 60) {
3378 status = 1;
3379 break;
3380 }
3381 }
3382 if (mbox->numstatus == 1)
3383 status = 1; /*cmd not supported*/
3384
3385 /* Check for interrupt line */
3386 dword = RDOUTDOOR(raid_dev);
3387 WROUTDOOR(raid_dev, dword);
3388 WRINDOOR(raid_dev,2);
3389
3390 return status;
3391
3392blocked_mailbox:
3393 con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n"));
3394 return status;
3395}
3396
3397/**
Linus Torvalds1da177e2005-04-16 15:20:36 -07003398 * megaraid_mbox_display_scb - display SCB information, mostly debug purposes
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003399 * @adapter : controller's soft state
3400 * @scb : SCB to be displayed
3401 * @level : debug level for console print
Linus Torvalds1da177e2005-04-16 15:20:36 -07003402 *
3403 * Diplay information about the given SCB iff the current debug level is
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003404 * verbose.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003405 */
3406static void
3407megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
3408{
3409 mbox_ccb_t *ccb;
3410 struct scsi_cmnd *scp;
3411 mbox_t *mbox;
3412 int level;
3413 int i;
3414
3415
3416 ccb = (mbox_ccb_t *)scb->ccb;
3417 scp = scb->scp;
3418 mbox = ccb->mbox;
3419
3420 level = CL_DLEVEL3;
3421
3422 con_log(level, (KERN_NOTICE
3423 "megaraid mailbox: status:%#x cmd:%#x id:%#x ", scb->status,
3424 mbox->cmd, scb->sno));
3425
3426 con_log(level, ("sec:%#x lba:%#x addr:%#x ld:%d sg:%d\n",
3427 mbox->numsectors, mbox->lba, mbox->xferaddr, mbox->logdrv,
3428 mbox->numsge));
3429
3430 if (!scp) return;
3431
3432 con_log(level, (KERN_NOTICE "scsi cmnd: "));
3433
3434 for (i = 0; i < scp->cmd_len; i++) {
3435 con_log(level, ("%#2.02x ", scp->cmnd[i]));
3436 }
3437
3438 con_log(level, ("\n"));
3439
3440 return;
3441}
3442
3443
3444/**
3445 * megaraid_mbox_setup_device_map - manage device ids
3446 * @adapter : Driver's soft state
3447 *
3448 * Manange the device ids to have an appropraite mapping between the kernel
3449 * scsi addresses and megaraid scsi and logical drive addresses. We export
3450 * scsi devices on their actual addresses, whereas the logical drives are
3451 * exported on a virtual scsi channel.
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003452 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07003453static void
3454megaraid_mbox_setup_device_map(adapter_t *adapter)
3455{
3456 uint8_t c;
3457 uint8_t t;
3458
3459 /*
3460 * First fill the values on the logical drive channel
3461 */
3462 for (t = 0; t < LSI_MAX_LOGICAL_DRIVES_64LD; t++)
3463 adapter->device_ids[adapter->max_channel][t] =
3464 (t < adapter->init_id) ? t : t - 1;
3465
3466 adapter->device_ids[adapter->max_channel][adapter->init_id] = 0xFF;
3467
3468 /*
3469 * Fill the values on the physical devices channels
3470 */
3471 for (c = 0; c < adapter->max_channel; c++)
3472 for (t = 0; t < LSI_MAX_LOGICAL_DRIVES_64LD; t++)
3473 adapter->device_ids[c][t] = (c << 8) | t;
3474}
3475
3476
3477/*
3478 * END: internal commands library
3479 */
3480
3481/*
3482 * START: Interface for the common management module
3483 *
Joe Perchesb1c11812008-02-03 17:28:22 +02003484 * This is the module, which interfaces with the common management module to
Linus Torvalds1da177e2005-04-16 15:20:36 -07003485 * provide support for ioctl and sysfs
3486 */
3487
3488/**
Joe Perchesb1c11812008-02-03 17:28:22 +02003489 * megaraid_cmm_register - register with the management module
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003490 * @adapter : HBA soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07003491 *
3492 * Register with the management module, which allows applications to issue
3493 * ioctl calls to the drivers. This interface is used by the management module
3494 * to setup sysfs support as well.
3495 */
3496static int
3497megaraid_cmm_register(adapter_t *adapter)
3498{
3499 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3500 mraid_mmadp_t adp;
3501 scb_t *scb;
3502 mbox_ccb_t *ccb;
3503 int rval;
3504 int i;
3505
3506 // Allocate memory for the base list of scb for management module.
Yoann Padioleaudd00cc42007-07-19 01:49:03 -07003507 adapter->uscb_list = kcalloc(MBOX_MAX_USER_CMDS, sizeof(scb_t), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003508
3509 if (adapter->uscb_list == NULL) {
3510 con_log(CL_ANN, (KERN_WARNING
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07003511 "megaraid: out of memory, %s %d\n", __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07003512 __LINE__));
3513 return -1;
3514 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07003515
3516
3517 // Initialize the synchronization parameters for resources for
3518 // commands for management module
3519 INIT_LIST_HEAD(&adapter->uscb_pool);
3520
3521 spin_lock_init(USER_FREE_LIST_LOCK(adapter));
3522
3523
3524
3525 // link all the packets. Note, CCB for commands, coming from the
3526 // commom management module, mailbox physical address are already
3527 // setup by it. We just need placeholder for that in our local command
3528 // control blocks
3529 for (i = 0; i < MBOX_MAX_USER_CMDS; i++) {
3530
3531 scb = adapter->uscb_list + i;
3532 ccb = raid_dev->uccb_list + i;
3533
3534 scb->ccb = (caddr_t)ccb;
3535 ccb->mbox64 = raid_dev->umbox64 + i;
3536 ccb->mbox = &ccb->mbox64->mbox32;
3537 ccb->raw_mbox = (uint8_t *)ccb->mbox;
3538
3539 scb->gp = 0;
3540
3541 // COMMAND ID 0 - (MBOX_MAX_SCSI_CMDS-1) ARE RESERVED FOR
3542 // COMMANDS COMING FROM IO SUBSYSTEM (MID-LAYER)
3543 scb->sno = i + MBOX_MAX_SCSI_CMDS;
3544
3545 scb->scp = NULL;
3546 scb->state = SCB_FREE;
3547 scb->dma_direction = PCI_DMA_NONE;
3548 scb->dma_type = MRAID_DMA_NONE;
3549 scb->dev_channel = -1;
3550 scb->dev_target = -1;
3551
3552 // put scb in the free pool
3553 list_add_tail(&scb->list, &adapter->uscb_pool);
3554 }
3555
3556 adp.unique_id = adapter->unique_id;
3557 adp.drvr_type = DRVRTYPE_MBOX;
3558 adp.drvr_data = (unsigned long)adapter;
3559 adp.pdev = adapter->pdev;
3560 adp.issue_uioc = megaraid_mbox_mm_handler;
Ju, Seokmannc005fb42006-04-27 02:33:06 -07003561 adp.timeout = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003562 adp.max_kioc = MBOX_MAX_USER_CMDS;
3563
3564 if ((rval = mraid_mm_register_adp(&adp)) != 0) {
3565
3566 con_log(CL_ANN, (KERN_WARNING
3567 "megaraid mbox: did not register with CMM\n"));
3568
3569 kfree(adapter->uscb_list);
3570 }
3571
3572 return rval;
3573}
3574
3575
3576/**
Joe Perchesb1c11812008-02-03 17:28:22 +02003577 * megaraid_cmm_unregister - un-register with the management module
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003578 * @adapter : HBA soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07003579 *
3580 * Un-register with the management module.
3581 * FIXME: mgmt module must return failure for unregister if it has pending
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003582 * commands in LLD.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003583 */
3584static int
3585megaraid_cmm_unregister(adapter_t *adapter)
3586{
3587 kfree(adapter->uscb_list);
3588 mraid_mm_unregister_adp(adapter->unique_id);
3589 return 0;
3590}
3591
3592
3593/**
3594 * megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003595 * @drvr_data : LLD specific data
3596 * @kioc : CMM interface packet
3597 * @action : command action
Linus Torvalds1da177e2005-04-16 15:20:36 -07003598 *
Joe Perchesb1c11812008-02-03 17:28:22 +02003599 * This routine is invoked whenever the Common Management Module (CMM) has a
Linus Torvalds1da177e2005-04-16 15:20:36 -07003600 * command for us. The 'action' parameter specifies if this is a new command
3601 * or otherwise.
3602 */
3603static int
3604megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action)
3605{
3606 adapter_t *adapter;
3607
3608 if (action != IOCTL_ISSUE) {
3609 con_log(CL_ANN, (KERN_WARNING
3610 "megaraid: unsupported management action:%#2x\n",
3611 action));
3612 return (-ENOTSUPP);
3613 }
3614
3615 adapter = (adapter_t *)drvr_data;
3616
3617 // make sure this adapter is not being detached right now.
3618 if (atomic_read(&adapter->being_detached)) {
3619 con_log(CL_ANN, (KERN_WARNING
3620 "megaraid: reject management request, detaching\n"));
3621 return (-ENODEV);
3622 }
3623
3624 switch (kioc->opcode) {
3625
3626 case GET_ADAP_INFO:
3627
3628 kioc->status = gather_hbainfo(adapter, (mraid_hba_info_t *)
3629 (unsigned long)kioc->buf_vaddr);
3630
3631 kioc->done(kioc);
3632
3633 return kioc->status;
3634
3635 case MBOX_CMD:
3636
3637 return megaraid_mbox_mm_command(adapter, kioc);
3638
3639 default:
3640 kioc->status = (-EINVAL);
3641 kioc->done(kioc);
3642 return (-EINVAL);
3643 }
3644
3645 return 0; // not reached
3646}
3647
3648/**
3649 * megaraid_mbox_mm_command - issues commands routed through CMM
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003650 * @adapter : HBA soft state
3651 * @kioc : management command packet
Linus Torvalds1da177e2005-04-16 15:20:36 -07003652 *
3653 * Issues commands, which are routed through the management module.
3654 */
3655static int
3656megaraid_mbox_mm_command(adapter_t *adapter, uioc_t *kioc)
3657{
3658 struct list_head *head = &adapter->uscb_pool;
3659 mbox64_t *mbox64;
3660 uint8_t *raw_mbox;
3661 scb_t *scb;
3662 mbox_ccb_t *ccb;
3663 unsigned long flags;
3664
3665 // detach one scb from free pool
3666 spin_lock_irqsave(USER_FREE_LIST_LOCK(adapter), flags);
3667
3668 if (list_empty(head)) { // should never happen because of CMM
3669
3670 con_log(CL_ANN, (KERN_WARNING
3671 "megaraid mbox: bug in cmm handler, lost resources\n"));
3672
3673 spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3674
3675 return (-EINVAL);
3676 }
3677
3678 scb = list_entry(head->next, scb_t, list);
3679 list_del_init(&scb->list);
3680
3681 spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3682
3683 scb->state = SCB_ACTIVE;
3684 scb->dma_type = MRAID_DMA_NONE;
3685 scb->dma_direction = PCI_DMA_NONE;
3686
3687 ccb = (mbox_ccb_t *)scb->ccb;
3688 mbox64 = (mbox64_t *)(unsigned long)kioc->cmdbuf;
3689 raw_mbox = (uint8_t *)&mbox64->mbox32;
3690
3691 memcpy(ccb->mbox64, mbox64, sizeof(mbox64_t));
3692
3693 scb->gp = (unsigned long)kioc;
3694
3695 /*
3696 * If it is a logdrv random delete operation, we have to wait till
3697 * there are no outstanding cmds at the fw and then issue it directly
3698 */
3699 if (raw_mbox[0] == FC_DEL_LOGDRV && raw_mbox[2] == OP_DEL_LOGDRV) {
3700
3701 if (wait_till_fw_empty(adapter)) {
3702 con_log(CL_ANN, (KERN_NOTICE
3703 "megaraid mbox: LD delete, timed out\n"));
3704
3705 kioc->status = -ETIME;
3706
3707 scb->status = -1;
3708
3709 megaraid_mbox_mm_done(adapter, scb);
3710
3711 return (-ETIME);
3712 }
3713
3714 INIT_LIST_HEAD(&scb->list);
3715
3716 scb->state = SCB_ISSUED;
3717 if (mbox_post_cmd(adapter, scb) != 0) {
3718
3719 con_log(CL_ANN, (KERN_NOTICE
3720 "megaraid mbox: LD delete, mailbox busy\n"));
3721
3722 kioc->status = -EBUSY;
3723
3724 scb->status = -1;
3725
3726 megaraid_mbox_mm_done(adapter, scb);
3727
3728 return (-EBUSY);
3729 }
3730
3731 return 0;
3732 }
3733
3734 // put the command on the pending list and execute
3735 megaraid_mbox_runpendq(adapter, scb);
3736
3737 return 0;
3738}
3739
3740
3741static int
3742wait_till_fw_empty(adapter_t *adapter)
3743{
3744 unsigned long flags = 0;
3745 int i;
3746
3747
3748 /*
3749 * Set the quiescent flag to stop issuing cmds to FW.
3750 */
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01003751 spin_lock_irqsave(&adapter->lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003752 adapter->quiescent++;
Christoph Hellwigf2c8dc42005-10-31 21:06:02 +01003753 spin_unlock_irqrestore(&adapter->lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003754
3755 /*
3756 * Wait till there are no more cmds outstanding at FW. Try for at most
3757 * 60 seconds
3758 */
3759 for (i = 0; i < 60 && adapter->outstanding_cmds; i++) {
3760 con_log(CL_DLEVEL1, (KERN_INFO
3761 "megaraid: FW has %d pending commands\n",
3762 adapter->outstanding_cmds));
3763
3764 msleep(1000);
3765 }
3766
3767 return adapter->outstanding_cmds;
3768}
3769
3770
3771/**
3772 * megaraid_mbox_mm_done - callback for CMM commands
3773 * @adapter : HBA soft state
3774 * @scb : completed command
3775 *
3776 * Callback routine for internal commands originated from the management
3777 * module.
3778 */
3779static void
3780megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
3781{
3782 uioc_t *kioc;
3783 mbox64_t *mbox64;
3784 uint8_t *raw_mbox;
3785 unsigned long flags;
3786
3787 kioc = (uioc_t *)scb->gp;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003788 mbox64 = (mbox64_t *)(unsigned long)kioc->cmdbuf;
3789 mbox64->mbox32.status = scb->status;
3790 raw_mbox = (uint8_t *)&mbox64->mbox32;
3791
3792
3793 // put scb in the free pool
3794 scb->state = SCB_FREE;
3795 scb->scp = NULL;
3796
3797 spin_lock_irqsave(USER_FREE_LIST_LOCK(adapter), flags);
3798
3799 list_add(&scb->list, &adapter->uscb_pool);
3800
3801 spin_unlock_irqrestore(USER_FREE_LIST_LOCK(adapter), flags);
3802
3803 // if a delete logical drive operation succeeded, restart the
3804 // controller
3805 if (raw_mbox[0] == FC_DEL_LOGDRV && raw_mbox[2] == OP_DEL_LOGDRV) {
3806
3807 adapter->quiescent--;
3808
3809 megaraid_mbox_runpendq(adapter, NULL);
3810 }
3811
3812 kioc->done(kioc);
3813
3814 return;
3815}
3816
3817
3818/**
3819 * gather_hbainfo - HBA characteristics for the applications
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003820 * @adapter : HBA soft state
3821 * @hinfo : pointer to the caller's host info strucuture
Linus Torvalds1da177e2005-04-16 15:20:36 -07003822 */
3823static int
3824gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo)
3825{
3826 uint8_t dmajor;
3827
3828 dmajor = megaraid_mbox_version[0];
3829
3830 hinfo->pci_vendor_id = adapter->pdev->vendor;
3831 hinfo->pci_device_id = adapter->pdev->device;
3832 hinfo->subsys_vendor_id = adapter->pdev->subsystem_vendor;
3833 hinfo->subsys_device_id = adapter->pdev->subsystem_device;
3834
3835 hinfo->pci_bus = adapter->pdev->bus->number;
3836 hinfo->pci_dev_fn = adapter->pdev->devfn;
3837 hinfo->pci_slot = PCI_SLOT(adapter->pdev->devfn);
3838 hinfo->irq = adapter->host->irq;
3839 hinfo->baseport = ADAP2RAIDDEV(adapter)->baseport;
3840
3841 hinfo->unique_id = (hinfo->pci_bus << 8) | adapter->pdev->devfn;
3842 hinfo->host_no = adapter->host->host_no;
3843
3844 return 0;
3845}
3846
3847/*
3848 * END: Interface for the common management module
3849 */
3850
3851
3852
3853/**
3854 * megaraid_sysfs_alloc_resources - allocate sysfs related resources
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003855 * @adapter : controller's soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07003856 *
3857 * Allocate packets required to issue FW calls whenever the sysfs attributes
3858 * are read. These attributes would require up-to-date information from the
3859 * FW. Also set up resources for mutual exclusion to share these resources and
3860 * the wait queue.
3861 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003862 * Return 0 on success.
3863 * Return -ERROR_CODE on failure.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003864 */
3865static int
3866megaraid_sysfs_alloc_resources(adapter_t *adapter)
3867{
3868 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3869 int rval = 0;
3870
3871 raid_dev->sysfs_uioc = kmalloc(sizeof(uioc_t), GFP_KERNEL);
3872
3873 raid_dev->sysfs_mbox64 = kmalloc(sizeof(mbox64_t), GFP_KERNEL);
3874
3875 raid_dev->sysfs_buffer = pci_alloc_consistent(adapter->pdev,
3876 PAGE_SIZE, &raid_dev->sysfs_buffer_dma);
3877
3878 if (!raid_dev->sysfs_uioc || !raid_dev->sysfs_mbox64 ||
3879 !raid_dev->sysfs_buffer) {
3880
3881 con_log(CL_ANN, (KERN_WARNING
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07003882 "megaraid: out of memory, %s %d\n", __func__,
Linus Torvalds1da177e2005-04-16 15:20:36 -07003883 __LINE__));
3884
3885 rval = -ENOMEM;
3886
3887 megaraid_sysfs_free_resources(adapter);
3888 }
3889
Matthias Kaehlcke0c2cc432007-07-09 12:00:11 -07003890 mutex_init(&raid_dev->sysfs_mtx);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003891
3892 init_waitqueue_head(&raid_dev->sysfs_wait_q);
3893
3894 return rval;
3895}
3896
3897
3898/**
3899 * megaraid_sysfs_free_resources - free sysfs related resources
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003900 * @adapter : controller's soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07003901 *
3902 * Free packets allocated for sysfs FW commands
Linus Torvalds1da177e2005-04-16 15:20:36 -07003903 */
3904static void
3905megaraid_sysfs_free_resources(adapter_t *adapter)
3906{
3907 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3908
Jesper Juhlc9475cb2005-11-07 01:01:26 -08003909 kfree(raid_dev->sysfs_uioc);
3910 kfree(raid_dev->sysfs_mbox64);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003911
3912 if (raid_dev->sysfs_buffer) {
3913 pci_free_consistent(adapter->pdev, PAGE_SIZE,
3914 raid_dev->sysfs_buffer, raid_dev->sysfs_buffer_dma);
3915 }
3916}
3917
3918
3919/**
3920 * megaraid_sysfs_get_ldmap_done - callback for get ldmap
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003921 * @uioc : completed packet
Linus Torvalds1da177e2005-04-16 15:20:36 -07003922 *
3923 * Callback routine called in the ISR/tasklet context for get ldmap call
Linus Torvalds1da177e2005-04-16 15:20:36 -07003924 */
3925static void
3926megaraid_sysfs_get_ldmap_done(uioc_t *uioc)
3927{
3928 adapter_t *adapter = (adapter_t *)uioc->buf_vaddr;
3929 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3930
3931 uioc->status = 0;
3932
3933 wake_up(&raid_dev->sysfs_wait_q);
3934}
3935
3936
3937/**
3938 * megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003939 * @data : timed out packet
Linus Torvalds1da177e2005-04-16 15:20:36 -07003940 *
3941 * Timeout routine to recover and return to application, in case the adapter
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003942 * has stopped responding. A timeout of 60 seconds for this command seems like
3943 * a good value.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003944 */
3945static void
3946megaraid_sysfs_get_ldmap_timeout(unsigned long data)
3947{
3948 uioc_t *uioc = (uioc_t *)data;
3949 adapter_t *adapter = (adapter_t *)uioc->buf_vaddr;
3950 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3951
3952 uioc->status = -ETIME;
3953
3954 wake_up(&raid_dev->sysfs_wait_q);
3955}
3956
3957
3958/**
3959 * megaraid_sysfs_get_ldmap - get update logical drive map
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003960 * @adapter : controller's soft state
Linus Torvalds1da177e2005-04-16 15:20:36 -07003961 *
3962 * This routine will be called whenever user reads the logical drive
3963 * attributes, go get the current logical drive mapping table from the
Joe Perchesb1c11812008-02-03 17:28:22 +02003964 * firmware. We use the management API's to issue commands to the controller.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003965 *
3966 * NOTE: The commands issuance functionality is not generalized and
3967 * implemented in context of "get ld map" command only. If required, the
3968 * command issuance logical can be trivially pulled out and implemented as a
3969 * standalone libary. For now, this should suffice since there is no other
3970 * user of this interface.
3971 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08003972 * Return 0 on success.
3973 * Return -1 on failure.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003974 */
3975static int
3976megaraid_sysfs_get_ldmap(adapter_t *adapter)
3977{
3978 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
3979 uioc_t *uioc;
3980 mbox64_t *mbox64;
3981 mbox_t *mbox;
3982 char *raw_mbox;
3983 struct timer_list sysfs_timer;
3984 struct timer_list *timerp;
3985 caddr_t ldmap;
3986 int rval = 0;
3987
3988 /*
3989 * Allow only one read at a time to go through the sysfs attributes
3990 */
Matthias Kaehlcke0c2cc432007-07-09 12:00:11 -07003991 mutex_lock(&raid_dev->sysfs_mtx);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003992
3993 uioc = raid_dev->sysfs_uioc;
3994 mbox64 = raid_dev->sysfs_mbox64;
3995 ldmap = raid_dev->sysfs_buffer;
3996
3997 memset(uioc, 0, sizeof(uioc_t));
3998 memset(mbox64, 0, sizeof(mbox64_t));
3999 memset(ldmap, 0, sizeof(raid_dev->curr_ldmap));
4000
4001 mbox = &mbox64->mbox32;
4002 raw_mbox = (char *)mbox;
4003 uioc->cmdbuf = (uint64_t)(unsigned long)mbox64;
4004 uioc->buf_vaddr = (caddr_t)adapter;
4005 uioc->status = -ENODATA;
4006 uioc->done = megaraid_sysfs_get_ldmap_done;
4007
4008 /*
4009 * Prepare the mailbox packet to get the current logical drive mapping
4010 * table
4011 */
4012 mbox->xferaddr = (uint32_t)raid_dev->sysfs_buffer_dma;
4013
4014 raw_mbox[0] = FC_DEL_LOGDRV;
4015 raw_mbox[2] = OP_GET_LDID_MAP;
4016
4017 /*
4018 * Setup a timer to recover from a non-responding controller
4019 */
4020 timerp = &sysfs_timer;
4021 init_timer(timerp);
4022
4023 timerp->function = megaraid_sysfs_get_ldmap_timeout;
4024 timerp->data = (unsigned long)uioc;
4025 timerp->expires = jiffies + 60 * HZ;
4026
4027 add_timer(timerp);
4028
4029 /*
4030 * Send the command to the firmware
4031 */
4032 rval = megaraid_mbox_mm_command(adapter, uioc);
4033
4034 if (rval == 0) { // command successfully issued
4035 wait_event(raid_dev->sysfs_wait_q, (uioc->status != -ENODATA));
4036
4037 /*
4038 * Check if the command timed out
4039 */
4040 if (uioc->status == -ETIME) {
4041 con_log(CL_ANN, (KERN_NOTICE
4042 "megaraid: sysfs get ld map timed out\n"));
4043
4044 rval = -ETIME;
4045 }
4046 else {
4047 rval = mbox->status;
4048 }
4049
4050 if (rval == 0) {
4051 memcpy(raid_dev->curr_ldmap, ldmap,
4052 sizeof(raid_dev->curr_ldmap));
4053 }
4054 else {
4055 con_log(CL_ANN, (KERN_NOTICE
4056 "megaraid: get ld map failed with %x\n", rval));
4057 }
4058 }
4059 else {
4060 con_log(CL_ANN, (KERN_NOTICE
4061 "megaraid: could not issue ldmap command:%x\n", rval));
4062 }
4063
4064
4065 del_timer_sync(timerp);
4066
Matthias Kaehlcke0c2cc432007-07-09 12:00:11 -07004067 mutex_unlock(&raid_dev->sysfs_mtx);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004068
4069 return rval;
4070}
4071
4072
4073/**
4074 * megaraid_sysfs_show_app_hndl - display application handle for this adapter
Randy Dunlapa69b74d2007-01-05 22:41:48 -08004075 * @cdev : class device object representation for the host
4076 * @buf : buffer to send data to
Linus Torvalds1da177e2005-04-16 15:20:36 -07004077 *
4078 * Display the handle used by the applications while executing management
4079 * tasks on the adapter. We invoke a management module API to get the adapter
4080 * handle, since we do not interface with applications directly.
Linus Torvalds1da177e2005-04-16 15:20:36 -07004081 */
4082static ssize_t
Tony Jonesee959b02008-02-22 00:13:36 +01004083megaraid_sysfs_show_app_hndl(struct device *dev, struct device_attribute *attr,
4084 char *buf)
Linus Torvalds1da177e2005-04-16 15:20:36 -07004085{
Tony Jonesee959b02008-02-22 00:13:36 +01004086 struct Scsi_Host *shost = class_to_shost(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004087 adapter_t *adapter = (adapter_t *)SCSIHOST2ADAP(shost);
4088 uint32_t app_hndl;
4089
4090 app_hndl = mraid_mm_adapter_app_handle(adapter->unique_id);
4091
4092 return snprintf(buf, 8, "%u\n", app_hndl);
4093}
4094
4095
4096/**
4097 * megaraid_sysfs_show_ldnum - display the logical drive number for this device
Randy Dunlapa69b74d2007-01-05 22:41:48 -08004098 * @dev : device object representation for the scsi device
4099 * @attr : device attribute to show
4100 * @buf : buffer to send data to
Linus Torvalds1da177e2005-04-16 15:20:36 -07004101 *
4102 * Display the logical drive number for the device in question, if it a valid
Randy Dunlapa69b74d2007-01-05 22:41:48 -08004103 * logical drive. For physical devices, "-1" is returned.
4104 *
4105 * The logical drive number is displayed in following format:
Linus Torvalds1da177e2005-04-16 15:20:36 -07004106 *
4107 * <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE>
Linus Torvalds1da177e2005-04-16 15:20:36 -07004108 *
Randy Dunlapa69b74d2007-01-05 22:41:48 -08004109 * <int> <int> <int> <int>
Linus Torvalds1da177e2005-04-16 15:20:36 -07004110 */
4111static ssize_t
Yani Ioannou10523b32005-05-17 06:43:37 -04004112megaraid_sysfs_show_ldnum(struct device *dev, struct device_attribute *attr, char *buf)
Linus Torvalds1da177e2005-04-16 15:20:36 -07004113{
4114 struct scsi_device *sdev = to_scsi_device(dev);
4115 adapter_t *adapter = (adapter_t *)SCSIHOST2ADAP(sdev->host);
4116 mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
4117 int scsi_id = -1;
4118 int logical_drv = -1;
4119 int ldid_map = -1;
4120 uint32_t app_hndl = 0;
4121 int mapped_sdev_id;
4122 int rval;
4123 int i;
4124
4125 if (raid_dev->random_del_supported &&
4126 MRAID_IS_LOGICAL_SDEV(adapter, sdev)) {
4127
4128 rval = megaraid_sysfs_get_ldmap(adapter);
4129 if (rval == 0) {
4130
4131 for (i = 0; i < MAX_LOGICAL_DRIVES_40LD; i++) {
4132
4133 mapped_sdev_id = sdev->id;
4134
4135 if (sdev->id > adapter->init_id) {
4136 mapped_sdev_id -= 1;
4137 }
4138
4139 if (raid_dev->curr_ldmap[i] == mapped_sdev_id) {
4140
4141 scsi_id = sdev->id;
4142
4143 logical_drv = i;
4144
4145 ldid_map = raid_dev->curr_ldmap[i];
4146
4147 app_hndl = mraid_mm_adapter_app_handle(
4148 adapter->unique_id);
4149
4150 break;
4151 }
4152 }
4153 }
4154 else {
4155 con_log(CL_ANN, (KERN_NOTICE
4156 "megaraid: sysfs get ld map failed: %x\n",
4157 rval));
4158 }
4159 }
4160
4161 return snprintf(buf, 36, "%d %d %d %d\n", scsi_id, logical_drv,
4162 ldid_map, app_hndl);
4163}
4164
4165
4166/*
4167 * END: Mailbox Low Level Driver
4168 */
4169module_init(megaraid_init);
4170module_exit(megaraid_exit);
4171
4172/* vim: set ts=8 sw=8 tw=78 ai si: */