blob: 11785275a669acd6b599a807b9ae20782b8472a1 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 Written 1994 by David C. Davies.
3
4 Copyright 1994 David C. Davies. This software may be used and distributed
5 according to the terms of the GNU General Public License, incorporated herein by
6 reference.
7*/
8
9/*
10** I/O addresses. Note that the 2k buffer option is not supported in
11** this driver.
12*/
13#define DEPCA_NICSR ioaddr+0x00 /* Network interface CSR */
14#define DEPCA_RBI ioaddr+0x02 /* RAM buffer index (2k buffer mode) */
15#define DEPCA_DATA ioaddr+0x04 /* LANCE registers' data port */
16#define DEPCA_ADDR ioaddr+0x06 /* LANCE registers' address port */
17#define DEPCA_HBASE ioaddr+0x08 /* EISA high memory base address reg. */
18#define DEPCA_PROM ioaddr+0x0c /* Ethernet address ROM data port */
19#define DEPCA_CNFG ioaddr+0x0c /* EISA Configuration port */
20#define DEPCA_RBSA ioaddr+0x0e /* RAM buffer starting address (2k buff.) */
21
22/*
23** These are LANCE registers addressable through DEPCA_ADDR
24*/
25#define CSR0 0
26#define CSR1 1
27#define CSR2 2
28#define CSR3 3
29
30/*
31** NETWORK INTERFACE CSR (NI_CSR) bit definitions
32*/
33
34#define TO 0x0100 /* Time Out for remote boot */
35#define SHE 0x0080 /* SHadow memory Enable */
36#define BS 0x0040 /* Bank Select */
37#define BUF 0x0020 /* BUFfer size (1->32k, 0->64k) */
38#define RBE 0x0010 /* Remote Boot Enable (1->net boot) */
39#define AAC 0x0008 /* Address ROM Address Counter (1->enable) */
40#define _128KB 0x0008 /* 128kB Network RAM (1->enable) */
41#define IM 0x0004 /* Interrupt Mask (1->mask) */
42#define IEN 0x0002 /* Interrupt tristate ENable (1->enable) */
43#define LED 0x0001 /* LED control */
44
45/*
46** Control and Status Register 0 (CSR0) bit definitions
47*/
48
49#define ERR 0x8000 /* Error summary */
50#define BABL 0x4000 /* Babble transmitter timeout error */
51#define CERR 0x2000 /* Collision Error */
52#define MISS 0x1000 /* Missed packet */
53#define MERR 0x0800 /* Memory Error */
54#define RINT 0x0400 /* Receiver Interrupt */
55#define TINT 0x0200 /* Transmit Interrupt */
56#define IDON 0x0100 /* Initialization Done */
57#define INTR 0x0080 /* Interrupt Flag */
58#define INEA 0x0040 /* Interrupt Enable */
59#define RXON 0x0020 /* Receiver on */
60#define TXON 0x0010 /* Transmitter on */
61#define TDMD 0x0008 /* Transmit Demand */
62#define STOP 0x0004 /* Stop */
63#define STRT 0x0002 /* Start */
64#define INIT 0x0001 /* Initialize */
65#define INTM 0xff00 /* Interrupt Mask */
66#define INTE 0xfff0 /* Interrupt Enable */
67
68/*
69** CONTROL AND STATUS REGISTER 3 (CSR3)
70*/
71
72#define BSWP 0x0004 /* Byte SWaP */
73#define ACON 0x0002 /* ALE control */
74#define BCON 0x0001 /* Byte CONtrol */
75
76/*
77** Initialization Block Mode Register
78*/
79
80#define PROM 0x8000 /* Promiscuous Mode */
81#define EMBA 0x0080 /* Enable Modified Back-off Algorithm */
82#define INTL 0x0040 /* Internal Loopback */
83#define DRTY 0x0020 /* Disable Retry */
84#define COLL 0x0010 /* Force Collision */
85#define DTCR 0x0008 /* Disable Transmit CRC */
86#define LOOP 0x0004 /* Loopback */
87#define DTX 0x0002 /* Disable the Transmitter */
88#define DRX 0x0001 /* Disable the Receiver */
89
90/*
91** Receive Message Descriptor 1 (RMD1) bit definitions.
92*/
93
94#define R_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */
95#define R_ERR 0x4000 /* Error Summary */
96#define R_FRAM 0x2000 /* Framing Error */
97#define R_OFLO 0x1000 /* Overflow Error */
98#define R_CRC 0x0800 /* CRC Error */
99#define R_BUFF 0x0400 /* Buffer Error */
100#define R_STP 0x0200 /* Start of Packet */
101#define R_ENP 0x0100 /* End of Packet */
102
103/*
104** Transmit Message Descriptor 1 (TMD1) bit definitions.
105*/
106
107#define T_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */
108#define T_ERR 0x4000 /* Error Summary */
109#define T_ADD_FCS 0x2000 /* More the 1 retry needed to Xmit */
110#define T_MORE 0x1000 /* >1 retry to transmit packet */
111#define T_ONE 0x0800 /* 1 try needed to transmit the packet */
112#define T_DEF 0x0400 /* Deferred */
113#define T_STP 0x02000000 /* Start of Packet */
114#define T_ENP 0x01000000 /* End of Packet */
115#define T_FLAGS 0xff000000 /* TX Flags Field */
116
117/*
118** Transmit Message Descriptor 3 (TMD3) bit definitions.
119*/
120
121#define TMD3_BUFF 0x8000 /* BUFFer error */
122#define TMD3_UFLO 0x4000 /* UnderFLOw error */
123#define TMD3_RES 0x2000 /* REServed */
124#define TMD3_LCOL 0x1000 /* Late COLlision */
125#define TMD3_LCAR 0x0800 /* Loss of CARrier */
126#define TMD3_RTRY 0x0400 /* ReTRY error */
127
128/*
129** EISA configuration Register (CNFG) bit definitions
130*/
131
132#define TIMEOUT 0x0100 /* 0:2.5 mins, 1: 30 secs */
133#define REMOTE 0x0080 /* Remote Boot Enable -> 1 */
134#define IRQ11 0x0040 /* Enable -> 1 */
135#define IRQ10 0x0020 /* Enable -> 1 */
136#define IRQ9 0x0010 /* Enable -> 1 */
137#define IRQ5 0x0008 /* Enable -> 1 */
138#define BUFF 0x0004 /* 0: 64kB or 128kB, 1: 32kB */
139#define PADR16 0x0002 /* RAM on 64kB boundary */
140#define PADR17 0x0001 /* RAM on 128kB boundary */
141
142/*
143** Miscellaneous
144*/
145#define HASH_TABLE_LEN 64 /* Bits */
146#define HASH_BITS 0x003f /* 6 LS bits */
147
148#define MASK_INTERRUPTS 1
149#define UNMASK_INTERRUPTS 0
150
151#define EISA_EN 0x0001 /* Enable EISA bus buffers */
152#define EISA_ID iobase+0x0080 /* ID long word for EISA card */
153#define EISA_CTRL iobase+0x0084 /* Control word for EISA card */
154
155/*
156** Include the IOCTL stuff
157*/
158#include <linux/sockios.h>
159
160#define DEPCAIOCTL SIOCDEVPRIVATE
161
162struct depca_ioctl {
163 unsigned short cmd; /* Command to run */
164 unsigned short len; /* Length of the data buffer */
165 unsigned char __user *data; /* Pointer to the data buffer */
166};
167
168/*
169** Recognised commands for the driver
170*/
171#define DEPCA_GET_HWADDR 0x01 /* Get the hardware address */
172#define DEPCA_SET_HWADDR 0x02 /* Get the hardware address */
173#define DEPCA_SET_PROM 0x03 /* Set Promiscuous Mode */
174#define DEPCA_CLR_PROM 0x04 /* Clear Promiscuous Mode */
175#define DEPCA_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */
176#define DEPCA_GET_MCA 0x06 /* Get a multicast address */
177#define DEPCA_SET_MCA 0x07 /* Set a multicast address */
178#define DEPCA_CLR_MCA 0x08 /* Clear a multicast address */
179#define DEPCA_MCA_EN 0x09 /* Enable a multicast address group */
180#define DEPCA_GET_STATS 0x0a /* Get the driver statistics */
181#define DEPCA_CLR_STATS 0x0b /* Zero out the driver statistics */
182#define DEPCA_GET_REG 0x0c /* Get the Register contents */
183#define DEPCA_SET_REG 0x0d /* Set the Register contents */
184#define DEPCA_DUMP 0x0f /* Dump the DEPCA Status */
185