blob: 99c0df1c7ebf5ec9f4fed97d7bfdd2de241b488b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
Nicolas Ferre0912e532009-06-23 16:30:56 +02008config HAVE_FB_ATMEL
9 bool
10
Randy Dunlap179b0252007-10-16 01:29:39 -070011source "drivers/char/agp/Kconfig"
12
Benjamin Herrenschmidtdeb2d2e2009-08-11 15:52:06 +100013source "drivers/gpu/vga/Kconfig"
14
Dave Airliec0e09202008-05-29 10:09:59 +100015source "drivers/gpu/drm/Kconfig"
Antonino A. Daplasba707102006-06-26 00:26:37 -070016
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -070017config VGASTATE
18 tristate
19 default n
20
Luming Yu23b0f012007-05-09 21:07:05 +080021config VIDEO_OUTPUT_CONTROL
22 tristate "Lowlevel video output switch controls"
Luming Yu23b0f012007-05-09 21:07:05 +080023 help
24 This framework adds support for low-level control of the video
25 output switch.
26
Randy Dunlap179b0252007-10-16 01:29:39 -070027menuconfig FB
Linus Torvalds1da177e2005-04-16 15:20:36 -070028 tristate "Support for frame buffer devices"
29 ---help---
30 The frame buffer device provides an abstraction for the graphics
31 hardware. It represents the frame buffer of some video hardware and
32 allows application software to access the graphics hardware through
33 a well-defined interface, so the software doesn't need to know
34 anything about the low-level (hardware register) stuff.
35
36 Frame buffer devices work identically across the different
37 architectures supported by Linux and make the implementation of
38 application programs easier and more portable; at this point, an X
39 server exists which uses the frame buffer device exclusively.
40 On several non-X86 architectures, the frame buffer device is the
41 only way to use the graphics hardware.
42
43 The device is accessed through special device nodes, usually located
44 in the /dev directory, i.e. /dev/fb*.
45
46 You need an utility program called fbset to make full use of frame
47 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
48 and the Framebuffer-HOWTO at
Alex Buell248ae0d2009-01-29 14:25:16 -080049 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
Linus Torvalds1da177e2005-04-16 15:20:36 -070050 information.
51
52 Say Y here and to the driver for your graphics board below if you
53 are compiling a kernel for a non-x86 architecture.
54
55 If you are compiling for the x86 architecture, you can say Y if you
56 want to play with it, but it is not essential. Please note that
57 running graphical applications that directly touch the hardware
58 (e.g. an accelerated X server) and that are not frame buffer
59 device-aware may cause unexpected results. If unsure, say N.
60
James Simmonse0e34ef2007-02-10 14:15:43 +000061config FIRMWARE_EDID
62 bool "Enable firmware EDID"
63 depends on FB
64 default n
65 ---help---
66 This enables access to the EDID transferred from the firmware.
67 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
68 transfers do not work for your driver and if you are using
69 nvidiafb, i810fb or savagefb.
70
71 In general, choosing Y for this option is safe. If you
72 experience extremely long delays while booting before you get
73 something on your display, try setting this to N. Matrox cards in
74 combination with certain motherboards and monitors are known to
75 suffer from this problem.
76
Dennis Munsiefc5891c2006-10-03 01:14:42 -070077config FB_DDC
78 tristate
James Simmonse0e34ef2007-02-10 14:15:43 +000079 depends on FB
80 select I2C_ALGOBIT
81 select I2C
Dennis Munsiefc5891c2006-10-03 01:14:42 -070082 default n
83
Michal Januszewski4d31a2b2008-10-15 22:03:51 -070084config FB_BOOT_VESA_SUPPORT
85 bool
86 depends on FB
87 default n
88 ---help---
89 If true, at least one selected framebuffer driver can take advantage
90 of VESA video modes set at an early boot stage via the vga= parameter.
91
Linus Torvalds1da177e2005-04-16 15:20:36 -070092config FB_CFB_FILLRECT
93 tristate
94 depends on FB
95 default n
96 ---help---
97 Include the cfb_fillrect function for generic software rectangle
98 filling. This is used by drivers that don't provide their own
99 (accelerated) version.
100
101config FB_CFB_COPYAREA
102 tristate
103 depends on FB
104 default n
105 ---help---
106 Include the cfb_copyarea function for generic software area copying.
107 This is used by drivers that don't provide their own (accelerated)
108 version.
109
110config FB_CFB_IMAGEBLIT
111 tristate
112 depends on FB
113 default n
114 ---help---
115 Include the cfb_imageblit function for generic software image
116 blitting. This is used by drivers that don't provide their own
117 (accelerated) version.
118
Pavel Pisa779121e2007-10-16 01:29:21 -0700119config FB_CFB_REV_PIXELS_IN_BYTE
120 bool
121 depends on FB
122 default n
123 ---help---
124 Allow generic frame-buffer functions to work on displays with 1, 2
125 and 4 bits per pixel depths which has opposite order of pixels in
126 byte order to bytes in long order.
127
Antonino A. Daplas68648ed2007-05-08 00:38:57 -0700128config FB_SYS_FILLRECT
129 tristate
130 depends on FB
131 default n
132 ---help---
133 Include the sys_fillrect function for generic software rectangle
134 filling. This is used by drivers that don't provide their own
135 (accelerated) version and the framebuffer is in system RAM.
136
137config FB_SYS_COPYAREA
138 tristate
139 depends on FB
140 default n
141 ---help---
142 Include the sys_copyarea function for generic software area copying.
143 This is used by drivers that don't provide their own (accelerated)
144 version and the framebuffer is in system RAM.
145
146config FB_SYS_IMAGEBLIT
147 tristate
148 depends on FB
149 default n
150 ---help---
151 Include the sys_imageblit function for generic software image
152 blitting. This is used by drivers that don't provide their own
153 (accelerated) version and the framebuffer is in system RAM.
154
Anton Vorontsove4c690e2008-04-28 02:14:49 -0700155menuconfig FB_FOREIGN_ENDIAN
156 bool "Framebuffer foreign endianness support"
157 depends on FB
158 ---help---
159 This menu will let you enable support for the framebuffers with
160 non-native endianness (e.g. Little-Endian framebuffer on a
161 Big-Endian machine). Most probably you don't have such hardware,
162 so it's safe to say "n" here.
163
164choice
165 prompt "Choice endianness support"
166 depends on FB_FOREIGN_ENDIAN
167
168config FB_BOTH_ENDIAN
169 bool "Support for Big- and Little-Endian framebuffers"
170
171config FB_BIG_ENDIAN
172 bool "Support for Big-Endian framebuffers only"
173
174config FB_LITTLE_ENDIAN
175 bool "Support for Little-Endian framebuffers only"
176
177endchoice
178
Antonino A. Daplas09aaf262007-05-08 00:39:03 -0700179config FB_SYS_FOPS
180 tristate
181 depends on FB
182 default n
183
Jaya Kumar60b59be2007-05-08 00:37:37 -0700184config FB_DEFERRED_IO
185 bool
186 depends on FB
Jaya Kumar60b59be2007-05-08 00:37:37 -0700187
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700188config FB_HECUBA
189 tristate
190 depends on FB
191 depends on FB_DEFERRED_IO
192
Ondrej Zajiceka2684222007-02-12 00:54:49 -0800193config FB_SVGALIB
194 tristate
195 depends on FB
196 default n
197 ---help---
198 Common utility functions useful to fbdev drivers of VGA-based
199 cards.
200
Linus Torvalds1da177e2005-04-16 15:20:36 -0700201config FB_MACMODES
202 tristate
203 depends on FB
204 default n
205
Michael Hanselmann5474c122006-06-25 05:47:08 -0700206config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -0700207 bool
208 depends on FB
209 select BACKLIGHT_LCD_SUPPORT
210 select BACKLIGHT_CLASS_DEVICE
211 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -0700212
Linus Torvalds1da177e2005-04-16 15:20:36 -0700213config FB_MODE_HELPERS
214 bool "Enable Video Mode Handling Helpers"
215 depends on FB
216 default n
217 ---help---
218 This enables functions for handling video modes using the
219 Generalized Timing Formula and the EDID parser. A few drivers rely
220 on this feature such as the radeonfb, rivafb, and the i810fb. If
221 your driver does not take advantage of this feature, choosing Y will
222 just increase the kernel size by about 5K.
223
224config FB_TILEBLITTING
225 bool "Enable Tile Blitting Support"
226 depends on FB
227 default n
228 ---help---
229 This enables tile blitting. Tile blitting is a drawing technique
230 where the screen is divided into rectangular sections (tiles), whereas
231 the standard blitting divides the screen into pixels. Because the
232 default drawing element is a tile, drawing functions will be passed
233 parameters in terms of number of tiles instead of number of pixels.
234 For example, to draw a single character, instead of using bitmaps,
235 an index to an array of bitmaps will be used. To clear or move a
236 rectangular section of a screen, the rectangle will be described in
237 terms of number of tiles in the x- and y-axis.
238
239 This is particularly important to one driver, matroxfb. If
240 unsure, say N.
241
Miguel Ojeda10ccaf42007-04-23 14:41:09 -0700242comment "Frame buffer hardware drivers"
James Simmonse0e34ef2007-02-10 14:15:43 +0000243 depends on FB
244
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245config FB_CIRRUS
246 tristate "Cirrus Logic support"
247 depends on FB && (ZORRO || PCI)
248 select FB_CFB_FILLRECT
249 select FB_CFB_COPYAREA
250 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251 ---help---
252 This enables support for Cirrus Logic GD542x/543x based boards on
253 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
254
255 If you have a PCI-based system, this enables support for these
256 chips: GD-543x, GD-544x, GD-5480.
257
258 Please read the file <file:Documentation/fb/cirrusfb.txt>.
259
260 Say N unless you have such a graphics board or plan to get one
261 before you next recompile the kernel.
262
263config FB_PM2
264 tristate "Permedia2 support"
265 depends on FB && ((AMIGA && BROKEN) || PCI)
266 select FB_CFB_FILLRECT
267 select FB_CFB_COPYAREA
268 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700270 This is the frame buffer device driver for cards based on
271 the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
272 The driver was tested on the following cards:
273 Diamond FireGL 1000 PRO AGP
274 ELSA Gloria Synergy PCI
275 Appian Jeronimo PRO (both heads) PCI
276 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
277 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
278 ASK Graphic Blaster Exxtreme AGP
279
280 To compile this driver as a module, choose M here: the
281 module will be called pm2fb.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282
283config FB_PM2_FIFO_DISCONNECT
284 bool "enable FIFO disconnect feature"
285 depends on FB_PM2 && PCI
286 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700287 Support the Permedia2 FIFO disconnect feature.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288
289config FB_ARMCLCD
290 tristate "ARM PrimeCell PL110 support"
291 depends on FB && ARM && ARM_AMBA
292 select FB_CFB_FILLRECT
293 select FB_CFB_COPYAREA
294 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700295 help
296 This framebuffer device driver is for the ARM PrimeCell PL110
297 Colour LCD controller. ARM PrimeCells provide the building
298 blocks for System on a Chip devices.
299
300 If you want to compile this as a module (=code which can be
301 inserted into and removed from the running kernel), say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500302 here and read <file:Documentation/kbuild/modules.txt>. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303 will be called amba-clcd.
304
Marc Singer903e2bb2006-05-16 11:41:30 +0100305choice
306
307 depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
308 prompt "LCD Panel"
309 default FB_ARMCLCD_SHARP_LQ035Q7DB02
310
311config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
312 bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
313 help
314 This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
Matt LaPlantecab00892006-10-03 22:36:44 +0200315 color QVGA, HRTFT panel. The LogicPD device includes
Marc Singer903e2bb2006-05-16 11:41:30 +0100316 an integrated HRTFT controller IC.
317 The native resolution is 240x320.
318
319config FB_ARMCLCD_SHARP_LQ057Q3DC02
320 bool "LogicPD LCD 5.7\" QVGA"
321 help
322 This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
323 color QVGA, TFT panel. The LogicPD device includes an
324 The native resolution is 320x240.
325
326config FB_ARMCLCD_SHARP_LQ64D343
327 bool "LogicPD LCD 6.4\" VGA"
328 help
329 This is an implementation of the Sharp LQ64D343, a 6.4"
330 color VGA, TFT panel. The LogicPD device includes an
331 The native resolution is 640x480.
332
333config FB_ARMCLCD_SHARP_LQ10D368
334 bool "LogicPD LCD 10.4\" VGA"
335 help
336 This is an implementation of the Sharp LQ10D368, a 10.4"
337 color VGA, TFT panel. The LogicPD device includes an
338 The native resolution is 640x480.
339
340
341config FB_ARMCLCD_SHARP_LQ121S1DG41
342 bool "LogicPD LCD 12.1\" SVGA"
343 help
344 This is an implementation of the Sharp LQ121S1DG41, a 12.1"
345 color SVGA, TFT panel. The LogicPD device includes an
346 The native resolution is 800x600.
347
348 This panel requires a clock rate may be an integer fraction
349 of the base LCDCLK frequency. The driver will select the
350 highest frequency available that is lower than the maximum
351 allowed. The panel may flicker if the clock rate is
352 slower than the recommended minimum.
353
354config FB_ARMCLCD_AUO_A070VW01_WIDE
355 bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
356 help
357 This is an implementation of the AU Optronics, a 7.0"
358 WIDE Color. The native resolution is 234x480.
359
360config FB_ARMCLCD_HITACHI
361 bool "Hitachi Wide Screen 800x480"
362 help
363 This is an implementation of the Hitachi 800x480.
364
365endchoice
366
367
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368config FB_ACORN
369 bool "Acorn VIDC support"
Russell King635f0252008-10-28 09:43:54 +0000370 depends on (FB = y) && ARM && ARCH_ACORN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371 select FB_CFB_FILLRECT
372 select FB_CFB_COPYAREA
373 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700374 help
375 This is the frame buffer device driver for the Acorn VIDC graphics
376 hardware found in Acorn RISC PCs and other ARM-based machines. If
377 unsure, say N.
378
379config FB_CLPS711X
380 bool "CLPS711X LCD support"
381 depends on (FB = y) && ARM && ARCH_CLPS711X
382 select FB_CFB_FILLRECT
383 select FB_CFB_COPYAREA
384 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800385 help
386 Say Y to enable the Framebuffer driver for the CLPS7111 and
387 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388
389config FB_SA1100
390 bool "SA-1100 LCD support"
391 depends on (FB = y) && ARM && ARCH_SA1100
392 select FB_CFB_FILLRECT
393 select FB_CFB_COPYAREA
394 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700395 help
396 This is a framebuffer device for the SA-1100 LCD Controller.
397 See <http://www.linux-fbdev.org/> for information on framebuffer
398 devices.
399
400 If you plan to use the LCD display with your SA-1100 system, say
401 Y here.
402
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700403config FB_IMX
404 tristate "Motorola i.MX LCD support"
Sascha Hauer8c8fdbc2009-04-01 12:40:15 +0200405 depends on FB && (ARCH_MX1 || ARCH_MX2)
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700406 select FB_CFB_FILLRECT
407 select FB_CFB_COPYAREA
408 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700409
Linus Torvalds1da177e2005-04-16 15:20:36 -0700410config FB_CYBER2000
411 tristate "CyberPro 2000/2010/5000 support"
412 depends on FB && PCI && (BROKEN || !SPARC64)
413 select FB_CFB_FILLRECT
414 select FB_CFB_COPYAREA
415 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 help
417 This enables support for the Integraphics CyberPro 20x0 and 5000
418 VGA chips used in the Rebel.com Netwinder and other machines.
419 Say Y if you have a NetWinder or a graphics card containing this
420 device, otherwise say N.
421
422config FB_APOLLO
423 bool
424 depends on (FB = y) && APOLLO
425 default y
426 select FB_CFB_FILLRECT
427 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428
429config FB_Q40
430 bool
431 depends on (FB = y) && Q40
432 default y
433 select FB_CFB_FILLRECT
434 select FB_CFB_COPYAREA
435 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700436
437config FB_AMIGA
438 tristate "Amiga native chipset support"
439 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 help
441 This is the frame buffer device driver for the builtin graphics
442 chipset found in Amigas.
443
444 To compile this driver as a module, choose M here: the
445 module will be called amifb.
446
447config FB_AMIGA_OCS
448 bool "Amiga OCS chipset support"
449 depends on FB_AMIGA
450 help
451 This enables support for the original Agnus and Denise video chips,
452 found in the Amiga 1000 and most A500's and A2000's. If you intend
453 to run Linux on any of these systems, say Y; otherwise say N.
454
455config FB_AMIGA_ECS
456 bool "Amiga ECS chipset support"
457 depends on FB_AMIGA
458 help
459 This enables support for the Enhanced Chip Set, found in later
460 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
461 you intend to run Linux on any of these systems, say Y; otherwise
462 say N.
463
464config FB_AMIGA_AGA
465 bool "Amiga AGA chipset support"
466 depends on FB_AMIGA
467 help
468 This enables support for the Advanced Graphics Architecture (also
469 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
470 and CD32. If you intend to run Linux on any of these systems, say Y;
471 otherwise say N.
472
Linus Torvalds1da177e2005-04-16 15:20:36 -0700473config FB_FM2
474 bool "Amiga FrameMaster II/Rainbow II support"
475 depends on (FB = y) && ZORRO
476 select FB_CFB_FILLRECT
477 select FB_CFB_COPYAREA
478 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700479 help
480 This is the frame buffer device driver for the Amiga FrameMaster
481 card from BSC (exhibited 1992 but not shipped as a CBM product).
482
Jaya Kumar1154ea72005-06-21 17:17:04 -0700483config FB_ARC
484 tristate "Arc Monochrome LCD board support"
485 depends on FB && X86
Antonino A. Daplas922e6f92007-05-08 00:38:58 -0700486 select FB_SYS_FILLRECT
487 select FB_SYS_COPYAREA
488 select FB_SYS_IMAGEBLIT
Antonino A. Daplasd9a05f12007-05-08 00:39:04 -0700489 select FB_SYS_FOPS
Jaya Kumar1154ea72005-06-21 17:17:04 -0700490 help
491 This enables support for the Arc Monochrome LCD board. The board
492 is based on the KS-108 lcd controller and is typically a matrix
493 of 2*n chips. This driver was tested with a 128x64 panel. This
494 driver supports it for use with x86 SBCs through a 16 bit GPIO
Matt LaPlante09509602006-10-03 22:31:37 +0200495 interface (8 bit data, 8 bit control). If you anticipate using
Jaya Kumar1154ea72005-06-21 17:17:04 -0700496 this driver, say Y or M; otherwise say N. You must specify the
497 GPIO IO address to be used for setting control and data.
498
Linus Torvalds1da177e2005-04-16 15:20:36 -0700499config FB_ATARI
500 bool "Atari native chipset support"
Michael Schmitza1005012007-05-01 22:32:39 +0200501 depends on (FB = y) && ATARI
502 select FB_CFB_FILLRECT
503 select FB_CFB_COPYAREA
504 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700505 help
506 This is the frame buffer device driver for the builtin graphics
507 chipset found in Ataris.
508
509config FB_OF
510 bool "Open Firmware frame buffer device support"
Stephen Rothwellbed59272007-03-04 17:04:44 +1100511 depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512 select FB_CFB_FILLRECT
513 select FB_CFB_COPYAREA
514 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700515 select FB_MACMODES
516 help
517 Say Y if you want support with Open Firmware for your graphics
518 board.
519
520config FB_CONTROL
521 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700522 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523 select FB_CFB_FILLRECT
524 select FB_CFB_COPYAREA
525 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700526 select FB_MACMODES
527 help
528 This driver supports a frame buffer for the graphics adapter in the
529 Power Macintosh 7300 and others.
530
531config FB_PLATINUM
532 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700533 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700534 select FB_CFB_FILLRECT
535 select FB_CFB_COPYAREA
536 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 select FB_MACMODES
538 help
539 This driver supports a frame buffer for the "platinum" graphics
540 adapter in some Power Macintoshes.
541
542config FB_VALKYRIE
543 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700544 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700545 select FB_CFB_FILLRECT
546 select FB_CFB_COPYAREA
547 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548 select FB_MACMODES
549 help
550 This driver supports a frame buffer for the "valkyrie" graphics
551 adapter in some Power Macintoshes.
552
553config FB_CT65550
554 bool "Chips 65550 display support"
Randy Dunlap0f8c02342007-11-14 16:58:45 -0800555 depends on (FB = y) && PPC32 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700556 select FB_CFB_FILLRECT
557 select FB_CFB_COPYAREA
558 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559 help
560 This is the frame buffer device driver for the Chips & Technologies
561 65550 graphics chip in PowerBooks.
562
563config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800564 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700565 depends on (FB = y) && PCI
566 select FB_CFB_FILLRECT
567 select FB_CFB_COPYAREA
568 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700569 help
570 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700571
572config FB_IMSTT
573 bool "IMS Twin Turbo display support"
574 depends on (FB = y) && PCI
575 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576 select FB_MACMODES if PPC
577 help
578 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
579 many Macintosh and compatible computers.
580
Linus Torvalds1da177e2005-04-16 15:20:36 -0700581config FB_VGA16
582 tristate "VGA 16-color graphics support"
583 depends on FB && (X86 || PPC)
584 select FB_CFB_FILLRECT
585 select FB_CFB_COPYAREA
586 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700587 select VGASTATE
Antonino A. Daplasd60d2d82007-05-08 00:39:12 -0700588 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700589 help
590 This is the frame buffer device driver for VGA 16 color graphic
591 cards. Say Y if you have such a card.
592
593 To compile this driver as a module, choose M here: the
594 module will be called vga16fb.
595
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700596config FB_BF54X_LQ043
597 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
Mike Frysingere7a05aa2008-04-28 02:15:47 -0700598 depends on FB && (BF54x) && !BF542
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700599 select FB_CFB_FILLRECT
600 select FB_CFB_COPYAREA
601 select FB_CFB_IMAGEBLIT
602 help
603 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
604
Michael Hennerich99eeed47a2008-03-10 11:44:04 -0700605config FB_BFIN_T350MCQB
606 tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
607 depends on FB && BLACKFIN
608 select BFIN_GPTIMERS
609 select FB_CFB_FILLRECT
610 select FB_CFB_COPYAREA
611 select FB_CFB_IMAGEBLIT
612 help
613 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
614 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
615 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
616
617
Linus Torvalds1da177e2005-04-16 15:20:36 -0700618config FB_STI
619 tristate "HP STI frame buffer device support"
620 depends on FB && PARISC
621 select FB_CFB_FILLRECT
622 select FB_CFB_COPYAREA
623 select FB_CFB_IMAGEBLIT
Alexander Beregalov17085a92009-04-03 13:33:32 +0000624 select STI_CONSOLE
625 select VT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700626 default y
627 ---help---
628 STI refers to the HP "Standard Text Interface" which is a set of
629 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
630 Enabling this option will implement the linux framebuffer device
631 using calls to the STI BIOS routines for initialisation.
632
633 If you enable this option, you will get a planar framebuffer device
634 /dev/fb which will work on the most common HP graphic cards of the
635 NGLE family, including the artist chips (in the 7xx and Bxxx series),
636 HCRX, HCRX24, CRX, CRX24 and VisEG series.
637
638 It is safe to enable this option, so you should probably say "Y".
639
640config FB_MAC
641 bool "Generic Macintosh display support"
642 depends on (FB = y) && MAC
643 select FB_CFB_FILLRECT
644 select FB_CFB_COPYAREA
645 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700646 select FB_MACMODES
647
Linus Torvalds1da177e2005-04-16 15:20:36 -0700648config FB_HP300
649 bool
Geert Uytterhoevenad7e4842008-05-18 20:47:09 +0200650 depends on (FB = y) && DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700651 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700652 default y
653
654config FB_TGA
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700655 tristate "TGA/SFB+ framebuffer support"
656 depends on FB && (ALPHA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700657 select FB_CFB_FILLRECT
658 select FB_CFB_COPYAREA
659 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800660 select BITREVERSE
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700661 ---help---
662 This is the frame buffer device driver for generic TGA and SFB+
663 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
664 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
665 TURBOchannel cards, also known as PMAGD-A, -B and -C.
666
667 Due to hardware limitations ZLX-E2 and E3 cards are not supported
668 for DECstation 5000/200 systems. Additionally due to firmware
669 limitations these cards may cause troubles with booting DECstation
670 5000/240 and /260 systems, but are fully supported under Linux if
671 you manage to get it going. ;-)
672
673 Say Y if you have one of those.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700674
Michal Januszewski8bdb3a22007-10-16 01:28:26 -0700675config FB_UVESA
676 tristate "Userspace VESA VGA graphics support"
677 depends on FB && CONNECTOR
678 select FB_CFB_FILLRECT
679 select FB_CFB_COPYAREA
680 select FB_CFB_IMAGEBLIT
681 select FB_MODE_HELPERS
682 help
683 This is the frame buffer driver for generic VBE 2.0 compliant
684 graphic cards. It can also take advantage of VBE 3.0 features,
685 such as refresh rate adjustment.
686
687 This driver generally provides more features than vesafb but
688 requires a userspace helper application called 'v86d'. See
689 <file:Documentation/fb/uvesafb.txt> for more information.
690
691 If unsure, say N.
692
Linus Torvalds1da177e2005-04-16 15:20:36 -0700693config FB_VESA
694 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800695 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700696 select FB_CFB_FILLRECT
697 select FB_CFB_COPYAREA
698 select FB_CFB_IMAGEBLIT
Michal Januszewski4d31a2b2008-10-15 22:03:51 -0700699 select FB_BOOT_VESA_SUPPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700700 help
701 This is the frame buffer device driver for generic VESA 2.0
702 compliant graphic cards. The older VESA 1.2 cards are not supported.
703 You will get a boot time penguin logo at no additional cost. Please
704 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
705
Huang, Ying7c831722007-11-28 16:21:55 -0800706config FB_EFI
707 bool "EFI-based Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700708 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700709 select FB_CFB_FILLRECT
710 select FB_CFB_COPYAREA
711 select FB_CFB_IMAGEBLIT
712 help
Peter Jones7c08c9a2008-10-15 22:03:43 -0700713 This is the EFI frame buffer device driver. If the firmware on
714 your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
715 using the EFI framebuffer as your console.
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700716
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700717config FB_N411
718 tristate "N411 Apollo/Hecuba devkit support"
Jaya Kumaraad09e52007-05-08 00:37:43 -0700719 depends on FB && X86 && MMU
Antonino A. Daplasd6774932007-05-08 00:39:00 -0700720 select FB_SYS_FILLRECT
721 select FB_SYS_COPYAREA
722 select FB_SYS_IMAGEBLIT
Antonino A. Daplas28d45642007-05-08 00:39:06 -0700723 select FB_SYS_FOPS
Jaya Kumaraad09e52007-05-08 00:37:43 -0700724 select FB_DEFERRED_IO
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700725 select FB_HECUBA
Jaya Kumaraad09e52007-05-08 00:37:43 -0700726 help
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700727 This enables support for the Apollo display controller in its
728 Hecuba form using the n411 devkit.
Jaya Kumaraad09e52007-05-08 00:37:43 -0700729
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730config FB_HGA
731 tristate "Hercules mono graphics support"
732 depends on FB && X86
733 select FB_CFB_FILLRECT
734 select FB_CFB_COPYAREA
735 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700736 help
737 Say Y here if you have a Hercules mono graphics card.
738
739 To compile this driver as a module, choose M here: the
740 module will be called hgafb.
741
742 As this card technology is 15 years old, most people will answer N
743 here.
744
745config FB_HGA_ACCEL
746 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
747 depends on FB_HGA && EXPERIMENTAL
748 ---help---
749 This will compile the Hercules mono graphics with
750 acceleration functions.
751
Linus Torvalds1da177e2005-04-16 15:20:36 -0700752config FB_SGIVW
753 tristate "SGI Visual Workstation framebuffer support"
754 depends on FB && X86_VISWS
755 select FB_CFB_FILLRECT
756 select FB_CFB_COPYAREA
757 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700758 help
759 SGI Visual Workstation support for framebuffer graphics.
760
761config FB_GBE
762 bool "SGI Graphics Backend frame buffer support"
763 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
764 select FB_CFB_FILLRECT
765 select FB_CFB_COPYAREA
766 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700767 help
768 This is the frame buffer device driver for SGI Graphics Backend.
769 This chip is used in SGI O2 and Visual Workstation 320/540.
770
771config FB_GBE_MEM
772 int "Video memory size in MB"
773 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800774 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700775 help
776 This is the amount of memory reserved for the framebuffer,
777 which can be any value between 1MB and 8MB.
778
Mark Fortescue1a571982005-11-29 19:34:44 -0800779config FB_SBUS
780 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800781 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800782 help
783 Say Y if you want support for SBUS or UPA based frame buffer device.
784
Linus Torvalds1da177e2005-04-16 15:20:36 -0700785config FB_BW2
786 bool "BWtwo support"
Adrian Bunke0196302007-02-12 00:54:50 -0800787 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700788 select FB_CFB_FILLRECT
789 select FB_CFB_COPYAREA
790 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700791 help
792 This is the frame buffer device driver for the BWtwo frame buffer.
793
794config FB_CG3
795 bool "CGthree support"
Adrian Bunke0196302007-02-12 00:54:50 -0800796 depends on (FB = y) && (SPARC && FB_SBUS)
Mark Fortescue1a571982005-11-29 19:34:44 -0800797 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700798 select FB_CFB_COPYAREA
799 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700800 help
801 This is the frame buffer device driver for the CGthree frame buffer.
802
803config FB_CG6
804 bool "CGsix (GX,TurboGX) support"
Adrian Bunke0196302007-02-12 00:54:50 -0800805 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 select FB_CFB_COPYAREA
807 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700808 help
809 This is the frame buffer device driver for the CGsix (GX, TurboGX)
810 frame buffer.
811
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700812config FB_FFB
813 bool "Creator/Creator3D/Elite3D support"
814 depends on FB_SBUS && SPARC64
815 select FB_CFB_COPYAREA
816 select FB_CFB_IMAGEBLIT
817 help
818 This is the frame buffer device driver for the Creator, Creator3D,
819 and Elite3D graphics boards.
820
821config FB_TCX
822 bool "TCX (SS4/SS5 only) support"
823 depends on FB_SBUS
824 select FB_CFB_FILLRECT
825 select FB_CFB_COPYAREA
826 select FB_CFB_IMAGEBLIT
827 help
828 This is the frame buffer device driver for the TCX 24/8bit frame
829 buffer.
830
831config FB_CG14
832 bool "CGfourteen (SX) support"
833 depends on FB_SBUS
834 select FB_CFB_FILLRECT
835 select FB_CFB_COPYAREA
836 select FB_CFB_IMAGEBLIT
837 help
838 This is the frame buffer device driver for the CGfourteen frame
839 buffer on Desktop SPARCsystems with the SX graphics option.
840
841config FB_P9100
842 bool "P9100 (Sparcbook 3 only) support"
843 depends on FB_SBUS
844 select FB_CFB_FILLRECT
845 select FB_CFB_COPYAREA
846 select FB_CFB_IMAGEBLIT
847 help
848 This is the frame buffer device driver for the P9100 card
849 supported on Sparcbook 3 machines.
850
851config FB_LEO
852 bool "Leo (ZX) support"
853 depends on FB_SBUS
854 select FB_CFB_FILLRECT
855 select FB_CFB_COPYAREA
856 select FB_CFB_IMAGEBLIT
857 help
858 This is the frame buffer device driver for the SBUS-based Sun ZX
859 (leo) frame buffer cards.
860
861config FB_IGA
862 bool "IGA 168x display support"
David S. Millere11a6c22007-06-03 17:35:24 -0700863 depends on (FB = y) && SPARC32
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700864 select FB_CFB_FILLRECT
865 select FB_CFB_COPYAREA
866 select FB_CFB_IMAGEBLIT
867 help
868 This is the framebuffer device for the INTERGRAPHICS 1680 and
869 successor frame buffer cards.
870
871config FB_XVR500
872 bool "Sun XVR-500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700873 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700874 select FB_CFB_FILLRECT
875 select FB_CFB_COPYAREA
876 select FB_CFB_IMAGEBLIT
877 help
878 This is the framebuffer device for the Sun XVR-500 and similar
879 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200880 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700881 mostly initialized the card already. It is treated as a
882 completely dumb framebuffer device.
883
884config FB_XVR2500
885 bool "Sun XVR-2500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700886 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700887 select FB_CFB_FILLRECT
888 select FB_CFB_COPYAREA
889 select FB_CFB_IMAGEBLIT
890 help
891 This is the framebuffer device for the Sun XVR-2500 and similar
892 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200893 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700894 mostly initialized the card already. It is treated as a
895 completely dumb framebuffer device.
896
Linus Torvalds1da177e2005-04-16 15:20:36 -0700897config FB_PVR2
898 tristate "NEC PowerVR 2 display support"
899 depends on FB && SH_DREAMCAST
900 select FB_CFB_FILLRECT
901 select FB_CFB_COPYAREA
902 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700903 ---help---
904 Say Y here if you have a PowerVR 2 card in your box. If you plan to
905 run linux on your Dreamcast, you will have to say Y here.
906 This driver may or may not work on other PowerVR 2 cards, but is
907 totally untested. Use at your own risk. If unsure, say N.
908
909 To compile this driver as a module, choose M here: the
910 module will be called pvr2fb.
911
912 You can pass several parameters to the driver at boot time or at
913 module load time. The parameters look like "video=pvr2:XXX", where
914 the meaning of XXX can be found at the end of the main source file
915 (<file:drivers/video/pvr2fb.c>). Please see the file
916 <file:Documentation/fb/pvr2fb.txt>.
917
918config FB_EPSON1355
919 bool "Epson 1355 framebuffer support"
Paul Mundt1a3f2882007-07-17 04:05:48 -0700920 depends on (FB = y) && ARCH_CEIVA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700921 select FB_CFB_FILLRECT
922 select FB_CFB_COPYAREA
923 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700924 help
925 Build in support for the SED1355 Epson Research Embedded RAMDAC
926 LCD/CRT Controller (since redesignated as the S1D13505) as a
927 framebuffer. Product specs at
928 <http://www.erd.epson.com/vdc/html/products.htm>.
929
Randy Dunlapecc41d52005-11-07 01:00:29 -0800930config FB_S1D13XXX
931 tristate "Epson S1D13XXX framebuffer support"
932 depends on FB
933 select FB_CFB_FILLRECT
934 select FB_CFB_COPYAREA
935 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800936 help
937 Support for S1D13XXX framebuffer device family (currently only
938 working with S1D13806). Product specs at
939 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
940
Nicolas Ferre14340582007-05-10 22:23:26 -0700941config FB_ATMEL
942 tristate "AT91/AT32 LCD Controller support"
Nicolas Ferre0912e532009-06-23 16:30:56 +0200943 depends on FB && HAVE_FB_ATMEL
Nicolas Ferre14340582007-05-10 22:23:26 -0700944 select FB_CFB_FILLRECT
945 select FB_CFB_COPYAREA
946 select FB_CFB_IMAGEBLIT
947 help
948 This enables support for the AT91/AT32 LCD Controller.
949
950config FB_INTSRAM
951 bool "Frame Buffer in internal SRAM"
952 depends on FB_ATMEL && ARCH_AT91SAM9261
953 help
954 Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
955 to let frame buffer in external SDRAM.
956
Nicolas Ferre250a2692007-07-21 04:37:59 -0700957config FB_ATMEL_STN
958 bool "Use a STN display with AT91/AT32 LCD Controller"
Nicolas Ferre915190f2009-07-21 11:31:29 +0100959 depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
Nicolas Ferre250a2692007-07-21 04:37:59 -0700960 default n
961 help
962 Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
963 Controller. Say N if you want to connect a TFT.
964
965 If unsure, say N.
966
Linus Torvalds1da177e2005-04-16 15:20:36 -0700967config FB_NVIDIA
968 tristate "nVidia Framebuffer Support"
969 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +0000970 select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700971 select FB_MODE_HELPERS
972 select FB_CFB_FILLRECT
973 select FB_CFB_COPYAREA
974 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800975 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700976 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700977 help
978 This driver supports graphics boards with the nVidia chips, TNT
979 and newer. For very old chipsets, such as the RIVA128, then use
980 the rivafb.
981 Say Y if you have such a graphics board.
982
983 To compile this driver as a module, choose M here: the
984 module will be called nvidiafb.
985
986config FB_NVIDIA_I2C
987 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -0800988 depends on FB_NVIDIA
James Simmons166f60d2007-03-06 01:42:02 -0800989 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700990 help
991 This enables I2C support for nVidia Chipsets. This is used
992 only for getting EDID information from the attached display
993 allowing for robust video mode handling and switching.
994
995 Because fbdev-2.6 requires that drivers must be able to
996 independently validate video mode parameters, you should say Y
997 here.
998
Jean Delvare647f2e72007-05-10 22:23:29 -0700999config FB_NVIDIA_DEBUG
1000 bool "Lots of debug output"
1001 depends on FB_NVIDIA
1002 default n
1003 help
1004 Say Y here if you want the nVidia driver to output all sorts
1005 of debugging information to provide to the maintainer when
1006 something goes wrong.
1007
Michael Hanselmann5474c122006-06-25 05:47:08 -07001008config FB_NVIDIA_BACKLIGHT
1009 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001010 depends on FB_NVIDIA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001011 default y
1012 help
1013 Say Y here if you want to control the backlight of your display.
1014
Linus Torvalds1da177e2005-04-16 15:20:36 -07001015config FB_RIVA
1016 tristate "nVidia Riva support"
1017 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001018 select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001019 select FB_MODE_HELPERS
1020 select FB_CFB_FILLRECT
1021 select FB_CFB_COPYAREA
1022 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -08001023 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001024 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001025 help
1026 This driver supports graphics boards with the nVidia Riva/Geforce
1027 chips.
1028 Say Y if you have such a graphics board.
1029
1030 To compile this driver as a module, choose M here: the
1031 module will be called rivafb.
1032
1033config FB_RIVA_I2C
1034 bool "Enable DDC Support"
1035 depends on FB_RIVA
James Simmons166f60d2007-03-06 01:42:02 -08001036 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001037 help
1038 This enables I2C support for nVidia Chipsets. This is used
1039 only for getting EDID information from the attached display
1040 allowing for robust video mode handling and switching.
1041
1042 Because fbdev-2.6 requires that drivers must be able to
1043 independently validate video mode parameters, you should say Y
1044 here.
1045
1046config FB_RIVA_DEBUG
Jean Delvare647f2e72007-05-10 22:23:29 -07001047 bool "Lots of debug output"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001048 depends on FB_RIVA
1049 default n
1050 help
1051 Say Y here if you want the Riva driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001052 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001053 something goes wrong.
1054
Michael Hanselmann5474c122006-06-25 05:47:08 -07001055config FB_RIVA_BACKLIGHT
1056 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001057 depends on FB_RIVA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001058 default y
1059 help
1060 Say Y here if you want to control the backlight of your display.
1061
Linus Torvalds1da177e2005-04-16 15:20:36 -07001062config FB_I810
1063 tristate "Intel 810/815 support (EXPERIMENTAL)"
Krzysztof Helta1a5c3b2009-02-18 14:48:38 -08001064 depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001065 select FB_MODE_HELPERS
1066 select FB_CFB_FILLRECT
1067 select FB_CFB_COPYAREA
1068 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001069 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001070 help
1071 This driver supports the on-board graphics built in to the Intel 810
1072 and 815 chipsets. Say Y if you have and plan to use such a board.
1073
1074 To compile this driver as a module, choose M here: the
1075 module will be called i810fb.
1076
1077 For more information, please read
1078 <file:Documentation/fb/intel810.txt>
1079
1080config FB_I810_GTF
1081 bool "use VESA Generalized Timing Formula"
1082 depends on FB_I810
1083 help
1084 If you say Y, then the VESA standard, Generalized Timing Formula
1085 or GTF, will be used to calculate the required video timing values
1086 per video mode. Since the GTF allows nondiscrete timings
1087 (nondiscrete being a range of values as opposed to discrete being a
1088 set of values), you'll be able to use any combination of horizontal
1089 and vertical resolutions, and vertical refresh rates without having
1090 to specify your own timing parameters. This is especially useful
1091 to maximize the performance of an aging display, or if you just
1092 have a display with nonstandard dimensions. A VESA compliant
1093 monitor is recommended, but can still work with non-compliant ones.
1094 If you need or want this, then select this option. The timings may
1095 not be compliant with Intel's recommended values. Use at your own
1096 risk.
1097
1098 If you say N, the driver will revert to discrete video timings
1099 using a set recommended by Intel in their documentation.
1100
1101 If unsure, say N.
1102
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001103config FB_I810_I2C
1104 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -07001105 depends on FB_I810 && FB_I810_GTF
Antonino A. Daplase80987f2006-10-03 01:14:44 -07001106 select FB_DDC
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001107 help
1108
Alan Hourihanedbe7e422007-05-08 00:39:25 -07001109config FB_LE80578
1110 tristate "Intel LE80578 (Vermilion) support"
1111 depends on FB && PCI && X86
1112 select FB_MODE_HELPERS
1113 select FB_CFB_FILLRECT
1114 select FB_CFB_COPYAREA
1115 select FB_CFB_IMAGEBLIT
1116 help
1117 This driver supports the LE80578 (Vermilion Range) chipset
1118
1119config FB_CARILLO_RANCH
1120 tristate "Intel Carillo Ranch support"
1121 depends on FB_LE80578 && FB && PCI && X86
1122 help
1123 This driver supports the LE80578 (Carillo Ranch) board
1124
Linus Torvalds1da177e2005-04-16 15:20:36 -07001125config FB_INTEL
Maik Broemme0e170c72008-04-28 02:15:43 -07001126 tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
Jesse Barnesba0ab822009-07-03 11:24:46 -07001127 depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -07001128 select FB_MODE_HELPERS
1129 select FB_CFB_FILLRECT
1130 select FB_CFB_COPYAREA
1131 select FB_CFB_IMAGEBLIT
Krzysztof Helt4b198282009-06-18 16:49:21 -07001132 select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
Jesse Barnesba0ab822009-07-03 11:24:46 -07001133 depends on !DRM_I915
Linus Torvalds1da177e2005-04-16 15:20:36 -07001134 help
1135 This driver supports the on-board graphics built in to the Intel
Maik Broemme0e170c72008-04-28 02:15:43 -07001136 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001137 Say Y if you have and plan to use such a board.
1138
Krzysztof Helt4b198282009-06-18 16:49:21 -07001139 To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
1140
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001141 To compile this driver as a module, choose M here: the
Linus Torvalds1da177e2005-04-16 15:20:36 -07001142 module will be called intelfb.
1143
Christian Merkled463d342006-08-22 10:07:01 +10001144 For more information, please read <file:Documentation/fb/intelfb.txt>
1145
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146config FB_INTEL_DEBUG
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001147 bool "Intel driver Debug Messages"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001148 depends on FB_INTEL
1149 ---help---
1150 Say Y here if you want the Intel driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001151 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001152 something goes wrong.
1153
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001154config FB_INTEL_I2C
1155 bool "DDC/I2C for Intel framebuffer support"
1156 depends on FB_INTEL
James Simmons166f60d2007-03-06 01:42:02 -08001157 select FB_DDC
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001158 default y
1159 help
1160 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1161
Linus Torvalds1da177e2005-04-16 15:20:36 -07001162config FB_MATROX
1163 tristate "Matrox acceleration"
1164 depends on FB && PCI
1165 select FB_CFB_FILLRECT
1166 select FB_CFB_COPYAREA
1167 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001168 select FB_TILEBLITTING
1169 select FB_MACMODES if PPC_PMAC
1170 ---help---
1171 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
1172 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
1173 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
1174 Matrox G400, G450 or G550 card in your box.
1175
1176 To compile this driver as a module, choose M here: the
1177 module will be called matroxfb.
1178
1179 You can pass several parameters to the driver at boot time or at
1180 module load time. The parameters look like "video=matrox:XXX", and
1181 are described in <file:Documentation/fb/matroxfb.txt>.
1182
1183config FB_MATROX_MILLENIUM
1184 bool "Millennium I/II support"
1185 depends on FB_MATROX
1186 help
1187 Say Y here if you have a Matrox Millennium or Matrox Millennium II
1188 video card. If you select "Advanced lowlevel driver options" below,
1189 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
1190 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
1191 also use font widths different from 8.
1192
1193config FB_MATROX_MYSTIQUE
1194 bool "Mystique support"
1195 depends on FB_MATROX
1196 help
1197 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
1198 video card. If you select "Advanced lowlevel driver options" below,
1199 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
1200 packed pixel and 32 bpp packed pixel. You can also use font widths
1201 different from 8.
1202
1203config FB_MATROX_G
1204 bool "G100/G200/G400/G450/G550 support"
1205 depends on FB_MATROX
1206 ---help---
1207 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1208 video card. If you select "Advanced lowlevel driver options", you
1209 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
1210 pixel and 32 bpp packed pixel. You can also use font widths
1211 different from 8.
1212
Jean Delvareee831262009-05-12 13:19:41 -07001213 If you need support for G400 secondary head, you must say Y to
1214 "Matrox I2C support" and "G400 second head support" right below.
1215 G450/G550 secondary head and digital output are supported without
1216 additional modules.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001217
1218 The driver starts in monitor mode. You must use the matroxset tool
1219 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1220 swap primary and secondary head outputs, or to change output mode.
1221 Secondary head driver always start in 640x480 resolution and you
1222 must use fbset to change it.
1223
1224 Do not forget that second head supports only 16 and 32 bpp
1225 packed pixels, so it is a good idea to compile them into the kernel
1226 too. You can use only some font widths, as the driver uses generic
1227 painting procedures (the secondary head does not use acceleration
1228 engine).
1229
1230 G450/G550 hardware can display TV picture only from secondary CRTC,
1231 and it performs no scaling, so picture must have 525 or 625 lines.
1232
1233config FB_MATROX_I2C
1234 tristate "Matrox I2C support"
James Simmons166f60d2007-03-06 01:42:02 -08001235 depends on FB_MATROX
1236 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001237 ---help---
1238 This drivers creates I2C buses which are needed for accessing the
1239 DDC (I2C) bus present on all Matroxes, an I2C bus which
1240 interconnects Matrox optional devices, like MGA-TVO on G200 and
1241 G400, and the secondary head DDC bus, present on G400 only.
1242
1243 You can say Y or M here if you want to experiment with monitor
1244 detection code. You must say Y or M here if you want to use either
1245 second head of G400 or MGA-TVO on G200 or G400.
1246
1247 If you compile it as module, it will create a module named
1248 i2c-matroxfb.
1249
1250config FB_MATROX_MAVEN
1251 tristate "G400 second head support"
1252 depends on FB_MATROX_G && FB_MATROX_I2C
1253 ---help---
1254 WARNING !!! This support does not work with G450 !!!
1255
1256 Say Y or M here if you want to use a secondary head (meaning two
1257 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1258 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1259 secondary head output is blanked while you are in X. With XFree
1260 3.9.17 preview you can use both heads if you use SVGA over fbdev or
1261 the fbdev driver on first head and the fbdev driver on second head.
1262
1263 If you compile it as module, two modules are created,
1264 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1265 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1266 also load i2c-matroxfb to get it to run.
1267
1268 The driver starts in monitor mode and you must use the matroxset
1269 tool (available at
1270 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1271 PAL or NTSC or to swap primary and secondary head outputs.
1272 Secondary head driver also always start in 640x480 resolution, you
1273 must use fbset to change it.
1274
1275 Also do not forget that second head supports only 16 and 32 bpp
1276 packed pixels, so it is a good idea to compile them into the kernel
1277 too. You can use only some font widths, as the driver uses generic
1278 painting procedures (the secondary head does not use acceleration
1279 engine).
1280
Linus Torvalds1da177e2005-04-16 15:20:36 -07001281config FB_RADEON
1282 tristate "ATI Radeon display support"
1283 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001284 select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001285 select FB_MODE_HELPERS
1286 select FB_CFB_FILLRECT
1287 select FB_CFB_COPYAREA
1288 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001289 select FB_MACMODES if PPC_OF
1290 help
1291 Choose this option if you want to use an ATI Radeon graphics card as
1292 a framebuffer device. There are both PCI and AGP versions. You
1293 don't need to choose this to run the Radeon in plain VGA mode.
1294
Linus Torvalds1da177e2005-04-16 15:20:36 -07001295 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -07001296 http://apps.ati.com/ATIcompare/
Michael Hanselmann5474c122006-06-25 05:47:08 -07001297
Linus Torvalds1da177e2005-04-16 15:20:36 -07001298config FB_RADEON_I2C
1299 bool "DDC/I2C for ATI Radeon support"
1300 depends on FB_RADEON
James Simmons166f60d2007-03-06 01:42:02 -08001301 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001302 default y
1303 help
1304 Say Y here if you want DDC/I2C support for your Radeon board.
1305
Michael Hanselmann5474c122006-06-25 05:47:08 -07001306config FB_RADEON_BACKLIGHT
1307 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001308 depends on FB_RADEON
Michael Hanselmann5474c122006-06-25 05:47:08 -07001309 default y
1310 help
1311 Say Y here if you want to control the backlight of your display.
1312
Linus Torvalds1da177e2005-04-16 15:20:36 -07001313config FB_RADEON_DEBUG
1314 bool "Lots of debug output from Radeon driver"
1315 depends on FB_RADEON
1316 default n
1317 help
1318 Say Y here if you want the Radeon driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001319 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001320 something goes wrong.
1321
1322config FB_ATY128
1323 tristate "ATI Rage128 display support"
1324 depends on FB && PCI
1325 select FB_CFB_FILLRECT
1326 select FB_CFB_COPYAREA
1327 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001328 select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001329 select FB_MACMODES if PPC_PMAC
1330 help
1331 This driver supports graphics boards with the ATI Rage128 chips.
1332 Say Y if you have such a graphics board and read
1333 <file:Documentation/fb/aty128fb.txt>.
1334
1335 To compile this driver as a module, choose M here: the
1336 module will be called aty128fb.
1337
Michael Hanselmann5474c122006-06-25 05:47:08 -07001338config FB_ATY128_BACKLIGHT
1339 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001340 depends on FB_ATY128
Michael Hanselmann5474c122006-06-25 05:47:08 -07001341 default y
1342 help
1343 Say Y here if you want to control the backlight of your display.
1344
Linus Torvalds1da177e2005-04-16 15:20:36 -07001345config FB_ATY
1346 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001347 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001348 select FB_CFB_FILLRECT
1349 select FB_CFB_COPYAREA
1350 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001351 select FB_BACKLIGHT if FB_ATY_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001352 select FB_MACMODES if PPC
1353 help
1354 This driver supports graphics boards with the ATI Mach64 chips.
1355 Say Y if you have such a graphics board.
1356
1357 To compile this driver as a module, choose M here: the
1358 module will be called atyfb.
1359
1360config FB_ATY_CT
1361 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1362 depends on PCI && FB_ATY
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -07001363 default y if SPARC64 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001364 help
1365 Say Y here to support use of ATI's 64-bit Rage boards (or other
1366 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1367 framebuffer device. The ATI product support page for these boards
1368 is at <http://support.ati.com/products/pc/mach64/>.
1369
1370config FB_ATY_GENERIC_LCD
1371 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1372 depends on FB_ATY_CT
1373 help
1374 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1375 Rage XC, or Rage XL chipset.
1376
Linus Torvalds1da177e2005-04-16 15:20:36 -07001377config FB_ATY_GX
1378 bool "Mach64 GX support" if PCI
1379 depends on FB_ATY
1380 default y if ATARI
1381 help
1382 Say Y here to support use of the ATI Mach64 Graphics Expression
1383 board (or other boards based on the Mach64 GX chipset) as a
1384 framebuffer device. The ATI product support page for these boards
1385 is at
1386 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1387
Michael Hanselmann5474c122006-06-25 05:47:08 -07001388config FB_ATY_BACKLIGHT
1389 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001390 depends on FB_ATY
Michael Hanselmann5474c122006-06-25 05:47:08 -07001391 default y
1392 help
1393 Say Y here if you want to control the backlight of your display.
1394
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001395config FB_S3
1396 tristate "S3 Trio/Virge support"
1397 depends on FB && PCI
1398 select FB_CFB_FILLRECT
1399 select FB_CFB_COPYAREA
1400 select FB_CFB_IMAGEBLIT
1401 select FB_TILEBLITTING
1402 select FB_SVGALIB
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001403 select VGASTATE
Antonino A. Daplas8db51662007-05-08 00:39:14 -07001404 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001405 ---help---
1406 Driver for graphics boards with S3 Trio / S3 Virge chip.
1407
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408config FB_SAVAGE
1409 tristate "S3 Savage support"
1410 depends on FB && PCI && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001411 select FB_MODE_HELPERS
1412 select FB_CFB_FILLRECT
1413 select FB_CFB_COPYAREA
1414 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001415 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001416 help
1417 This driver supports notebooks and computers with S3 Savage PCI/AGP
1418 chips.
1419
1420 Say Y if you have such a graphics card.
1421
1422 To compile this driver as a module, choose M here; the module
1423 will be called savagefb.
1424
1425config FB_SAVAGE_I2C
1426 bool "Enable DDC2 Support"
1427 depends on FB_SAVAGE
James Simmons166f60d2007-03-06 01:42:02 -08001428 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001429 help
1430 This enables I2C support for S3 Savage Chipsets. This is used
1431 only for getting EDID information from the attached display
1432 allowing for robust video mode handling and switching.
1433
1434 Because fbdev-2.6 requires that drivers must be able to
1435 independently validate video mode parameters, you should say Y
1436 here.
1437
1438config FB_SAVAGE_ACCEL
1439 bool "Enable Console Acceleration"
1440 depends on FB_SAVAGE
1441 default n
1442 help
1443 This option will compile in console acceleration support. If
1444 the resulting framebuffer console has bothersome glitches, then
1445 choose N here.
1446
1447config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001448 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001449 depends on FB && PCI
1450 select FB_CFB_FILLRECT
1451 select FB_CFB_COPYAREA
1452 select FB_CFB_IMAGEBLIT
Krzysztof Helt4b198282009-06-18 16:49:21 -07001453 select FB_BOOT_VESA_SUPPORT if FB_SIS = y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001454 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001455 This is the frame buffer device driver for the SiS 300, 315, 330
1456 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1457 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001458
1459 To compile this driver as a module, choose M here; the module
1460 will be called sisfb.
1461
1462config FB_SIS_300
1463 bool "SiS 300 series support"
1464 depends on FB_SIS
1465 help
1466 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1467
1468config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001469 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001470 depends on FB_SIS
1471 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001472 Say Y here to support use of the SiS 315, 330 and 340 series
1473 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1474 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001475
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001476config FB_VIA
1477 tristate "VIA UniChrome (Pro) and Chrome9 display support"
1478 depends on FB && PCI
1479 select FB_CFB_FILLRECT
1480 select FB_CFB_COPYAREA
1481 select FB_CFB_IMAGEBLIT
1482 select FB_SOFT_CURSOR
1483 select I2C_ALGOBIT
1484 select I2C
1485 help
1486 This is the frame buffer device driver for Graphics chips of VIA
1487 UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
1488 CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
1489 /P4M900,VX800)
1490 Say Y if you have a VIA UniChrome graphics board.
1491
1492 To compile this driver as a module, choose M here: the
1493 module will be called viafb.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001494config FB_NEOMAGIC
1495 tristate "NeoMagic display support"
1496 depends on FB && PCI
1497 select FB_MODE_HELPERS
1498 select FB_CFB_FILLRECT
1499 select FB_CFB_COPYAREA
1500 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001501 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001502 help
1503 This driver supports notebooks with NeoMagic PCI chips.
1504 Say Y if you have such a graphics card.
1505
1506 To compile this driver as a module, choose M here: the
1507 module will be called neofb.
1508
1509config FB_KYRO
1510 tristate "IMG Kyro support"
1511 depends on FB && PCI
1512 select FB_CFB_FILLRECT
1513 select FB_CFB_COPYAREA
1514 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001515 help
1516 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1517 graphics board.
1518
1519 To compile this driver as a module, choose M here: the
1520 module will be called kyrofb.
1521
1522config FB_3DFX
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001523 tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001524 depends on FB && PCI
1525 select FB_CFB_IMAGEBLIT
1526 select FB_CFB_FILLRECT
1527 select FB_CFB_COPYAREA
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001528 select FB_MODE_HELPERS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001529 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001530 This driver supports graphics boards with the 3Dfx Banshee,
1531 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1532 such a graphics board.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001533
1534 To compile this driver as a module, choose M here: the
1535 module will be called tdfxfb.
1536
1537config FB_3DFX_ACCEL
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001538 bool "3Dfx Acceleration functions (EXPERIMENTAL)"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001539 depends on FB_3DFX && EXPERIMENTAL
1540 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001541 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1542 device driver with acceleration functions.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001543
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001544config FB_3DFX_I2C
1545 bool "Enable DDC/I2C support"
1546 depends on FB_3DFX && EXPERIMENTAL
1547 select FB_DDC
1548 default y
1549 help
1550 Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1551
Linus Torvalds1da177e2005-04-16 15:20:36 -07001552config FB_VOODOO1
1553 tristate "3Dfx Voodoo Graphics (sst1) support"
1554 depends on FB && PCI
1555 select FB_CFB_FILLRECT
1556 select FB_CFB_COPYAREA
1557 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001558 ---help---
1559 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1560 Voodoo2 (cvg) based graphics card.
1561
1562 To compile this driver as a module, choose M here: the
1563 module will be called sstfb.
1564
1565 WARNING: Do not use any application that uses the 3D engine
1566 (namely glide) while using this driver.
Dirk Hohndele4031492007-10-30 13:37:19 -07001567 Please read the <file:Documentation/fb/sstfb.txt> for supported
Linus Torvalds1da177e2005-04-16 15:20:36 -07001568 options and other important info support.
1569
Ondrej Zajicek558b7bd2007-05-09 02:35:31 -07001570config FB_VT8623
1571 tristate "VIA VT8623 support"
1572 depends on FB && PCI
1573 select FB_CFB_FILLRECT
1574 select FB_CFB_COPYAREA
1575 select FB_CFB_IMAGEBLIT
1576 select FB_TILEBLITTING
1577 select FB_SVGALIB
1578 select VGASTATE
1579 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1580 ---help---
1581 Driver for CastleRock integrated graphics core in the
1582 VIA VT8623 [Apollo CLE266] chipset.
1583
Linus Torvalds1da177e2005-04-16 15:20:36 -07001584config FB_TRIDENT
Krzysztof Helt04645fc2009-03-31 15:25:48 -07001585 tristate "Trident/CyberXXX/CyberBlade support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001586 depends on FB && PCI
1587 select FB_CFB_FILLRECT
1588 select FB_CFB_COPYAREA
1589 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001590 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001591 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1592 Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
1593 and Blade XP.
1594 There are also integrated versions of these chips called CyberXXXX,
1595 CyberImage or CyberBlade. These chips are mostly found in laptops
Krzysztof Heltddb53d42009-03-31 15:25:40 -07001596 but also on some motherboards including early VIA EPIA motherboards.
1597 For more information, read <file:Documentation/fb/tridentfb.txt>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001598
1599 Say Y if you have such a graphics board.
1600
1601 To compile this driver as a module, choose M here: the
1602 module will be called tridentfb.
1603
Ondrej Zajicek681e1472007-05-09 02:35:31 -07001604config FB_ARK
1605 tristate "ARK 2000PV support"
1606 depends on FB && PCI
1607 select FB_CFB_FILLRECT
1608 select FB_CFB_COPYAREA
1609 select FB_CFB_IMAGEBLIT
1610 select FB_TILEBLITTING
1611 select FB_SVGALIB
1612 select VGASTATE
1613 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1614 ---help---
1615 Driver for PCI graphics boards with ARK 2000PV chip
1616 and ICS 5342 RAMDAC.
1617
Linus Torvalds1da177e2005-04-16 15:20:36 -07001618config FB_PM3
Krzysztof Heltf23a06f2007-05-10 22:23:25 -07001619 tristate "Permedia3 support (EXPERIMENTAL)"
1620 depends on FB && PCI && EXPERIMENTAL
1621 select FB_CFB_FILLRECT
1622 select FB_CFB_COPYAREA
1623 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001624 help
1625 This is the frame buffer device driver for the 3DLabs Permedia3
1626 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1627 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1628 and maybe other boards.
1629
Sebastian Siewior2ece5f432008-07-23 21:30:49 -07001630config FB_CARMINE
1631 tristate "Fujitsu carmine frame buffer support"
1632 depends on FB && PCI
1633 select FB_CFB_FILLRECT
1634 select FB_CFB_COPYAREA
1635 select FB_CFB_IMAGEBLIT
1636 help
1637 This is the frame buffer device driver for the Fujitsu Carmine chip.
1638 The driver provides two independent frame buffer devices.
1639
1640choice
1641 depends on FB_CARMINE
1642 prompt "DRAM timing"
1643 default FB_CARMINE_DRAM_EVAL
1644
1645config FB_CARMINE_DRAM_EVAL
1646 bool "Eval board timings"
1647 help
1648 Use timings which work on the eval card.
1649
1650config CARMINE_DRAM_CUSTOM
1651 bool "Custom board timings"
1652 help
1653 Use custom board timings.
1654endchoice
1655
Linus Torvalds1da177e2005-04-16 15:20:36 -07001656config FB_AU1100
1657 bool "Au1100 LCD Driver"
Ralf Baechled1709e42007-07-23 18:43:50 -07001658 depends on (FB = y) && MIPS && SOC_AU1100
1659 select FB_CFB_FILLRECT
1660 select FB_CFB_COPYAREA
1661 select FB_CFB_IMAGEBLIT
1662 help
1663 This is the framebuffer driver for the AMD Au1100 SOC. It can drive
1664 various panels and CRTs by passing in kernel cmd line option
1665 au1100fb:panel=<name>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001666
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001667config FB_AU1200
1668 bool "Au1200 LCD Driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001669 depends on (FB = y) && MIPS && SOC_AU1200
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001670 select FB_CFB_FILLRECT
1671 select FB_CFB_COPYAREA
1672 select FB_CFB_IMAGEBLIT
1673 help
1674 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1675 various panels and CRTs by passing in kernel cmd line option
1676 au1200fb:panel=<name>.
1677
Linus Torvalds1da177e2005-04-16 15:20:36 -07001678source "drivers/video/geode/Kconfig"
1679
Linus Torvalds1da177e2005-04-16 15:20:36 -07001680config FB_HIT
1681 tristate "HD64461 Frame Buffer support"
1682 depends on FB && HD64461
1683 select FB_CFB_FILLRECT
1684 select FB_CFB_COPYAREA
1685 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001686 help
1687 This is the frame buffer device driver for the Hitachi HD64461 LCD
1688 frame buffer card.
1689
1690config FB_PMAG_AA
1691 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001692 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001693 select FB_CFB_FILLRECT
1694 select FB_CFB_COPYAREA
1695 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001696 help
1697 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1698 used mainly in the MIPS-based DECstation series.
1699
1700config FB_PMAG_BA
Maciej W. Rozycki335dc502007-02-05 16:28:28 -08001701 tristate "PMAG-BA TURBOchannel framebuffer support"
1702 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001703 select FB_CFB_FILLRECT
1704 select FB_CFB_COPYAREA
1705 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001706 help
1707 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1708 used mainly in the MIPS-based DECstation series.
1709
1710config FB_PMAGB_B
Maciej W. Rozycki9084b002007-02-05 16:28:29 -08001711 tristate "PMAGB-B TURBOchannel framebuffer support"
Maciej W. Rozycki28ea28a2007-10-16 01:29:28 -07001712 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001713 select FB_CFB_FILLRECT
1714 select FB_CFB_COPYAREA
1715 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001716 help
1717 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1718 in the MIPS-based DECstation series. The card is currently only
1719 supported in 1280x1024x8 mode.
1720
1721config FB_MAXINE
1722 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001723 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001724 select FB_CFB_FILLRECT
1725 select FB_CFB_COPYAREA
1726 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001727 help
1728 Support for the onboard framebuffer (1024x768x8) in the Personal
1729 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1730 Codename "Maxine").
1731
Linus Torvalds1da177e2005-04-16 15:20:36 -07001732config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001733 bool "G364 frame buffer support"
1734 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001735 select FB_CFB_FILLRECT
1736 select FB_CFB_COPYAREA
1737 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001738 help
1739 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1740 Olivetti M700-10 systems.
1741
1742config FB_68328
1743 bool "Motorola 68328 native frame buffer support"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001744 depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001745 select FB_CFB_FILLRECT
1746 select FB_CFB_COPYAREA
1747 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001748 help
1749 Say Y here if you want to support the built-in frame buffer of
1750 the Motorola 68328 CPU family.
1751
Lennert Buytenhek638772c2009-02-11 17:25:24 +08001752config FB_PXA168
1753 tristate "PXA168/910 LCD framebuffer support"
1754 depends on FB && (CPU_PXA168 || CPU_PXA910)
1755 select FB_CFB_FILLRECT
1756 select FB_CFB_COPYAREA
1757 select FB_CFB_IMAGEBLIT
1758 ---help---
1759 Frame buffer driver for the built-in LCD controller in the Marvell
1760 MMP processor.
1761
Linus Torvalds1da177e2005-04-16 15:20:36 -07001762config FB_PXA
1763 tristate "PXA LCD framebuffer support"
1764 depends on FB && ARCH_PXA
1765 select FB_CFB_FILLRECT
1766 select FB_CFB_COPYAREA
1767 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001768 ---help---
1769 Frame buffer driver for the built-in LCD controller in the Intel
1770 PXA2x0 processor.
1771
1772 This driver is also available as a module ( = code which can be
1773 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001774 module will be called pxafb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001775 say M here and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001776
1777 If unsure, say N.
1778
Eric Miao198fc102008-12-23 17:49:43 +08001779config FB_PXA_OVERLAY
1780 bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
1781 default n
1782 depends on FB_PXA && (PXA27x || PXA3xx)
1783
Eric Miao3c42a442008-04-30 00:52:26 -07001784config FB_PXA_SMARTPANEL
1785 bool "PXA Smartpanel LCD support"
Eric Miao7f1133c2008-04-30 00:52:27 -07001786 default n
Eric Miao3c42a442008-04-30 00:52:26 -07001787 depends on FB_PXA
1788
Linus Torvalds1da177e2005-04-16 15:20:36 -07001789config FB_PXA_PARAMETERS
1790 bool "PXA LCD command line parameters"
1791 default n
1792 depends on FB_PXA
1793 ---help---
1794 Enable the use of kernel command line or module parameters
1795 to configure the physical properties of the LCD panel when
1796 using the PXA LCD driver.
1797
1798 This option allows you to override the panel parameters
1799 supplied by the platform in order to support multiple
1800 different models of flatpanel. If you will only be using a
1801 single model of flatpanel then you can safely leave this
1802 option disabled.
1803
1804 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1805
Mike Rapoport22caf042006-07-14 00:24:34 -07001806config FB_MBX
1807 tristate "2700G LCD framebuffer support"
1808 depends on FB && ARCH_PXA
1809 select FB_CFB_FILLRECT
1810 select FB_CFB_COPYAREA
1811 select FB_CFB_IMAGEBLIT
1812 ---help---
1813 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1814 Accelerator
1815
1816config FB_MBX_DEBUG
1817 bool "Enable debugging info via debugfs"
1818 depends on FB_MBX && DEBUG_FS
1819 default n
1820 ---help---
1821 Enable this if you want debugging information using the debug
1822 filesystem (debugfs)
1823
1824 If unsure, say N.
1825
York Sun9b53a9e2008-04-28 02:15:34 -07001826config FB_FSL_DIU
1827 tristate "Freescale DIU framebuffer support"
1828 depends on FB && FSL_SOC
1829 select FB_CFB_FILLRECT
1830 select FB_CFB_COPYAREA
1831 select FB_CFB_IMAGEBLIT
1832 select PPC_LIB_RHEAP
1833 ---help---
1834 Framebuffer driver for the Freescale SoC DIU
1835
Randy Dunlapecc41d52005-11-07 01:00:29 -08001836config FB_W100
1837 tristate "W100 frame buffer support"
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001838 depends on FB && ARCH_PXA
Randy Dunlapecc41d52005-11-07 01:00:29 -08001839 select FB_CFB_FILLRECT
1840 select FB_CFB_COPYAREA
1841 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001842 ---help---
1843 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001844 It can also drive the w3220 chip found on iPAQ hx4700.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001845
1846 This driver is also available as a module ( = code which can be
1847 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001848 module will be called w100fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001849 say M here and read <file:Documentation/kbuild/modules.txt>.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001850
1851 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001852
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001853config FB_SH_MOBILE_LCDC
1854 tristate "SuperH Mobile LCDC framebuffer support"
Paul Mundt727dc3f2009-07-07 10:30:02 +09001855 depends on FB && SUPERH && HAVE_CLK
Magnus Damm2540c112008-12-17 17:29:49 +09001856 select FB_SYS_FILLRECT
1857 select FB_SYS_COPYAREA
1858 select FB_SYS_IMAGEBLIT
1859 select FB_SYS_FOPS
Magnus Damm85645572008-12-19 15:34:41 +09001860 select FB_DEFERRED_IO
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001861 ---help---
1862 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1863
Dmitry Baryshkovb53cde32008-10-15 22:03:55 -07001864config FB_TMIO
1865 tristate "Toshiba Mobile IO FrameBuffer support"
1866 depends on FB && MFD_CORE
1867 select FB_CFB_FILLRECT
1868 select FB_CFB_COPYAREA
1869 select FB_CFB_IMAGEBLIT
1870 ---help---
1871 Frame buffer driver for the Toshiba Mobile IO integrated as found
1872 on the Sharp SL-6000 series
1873
1874 This driver is also available as a module ( = code which can be
1875 inserted and removed from the running kernel whenever you want). The
1876 module will be called tmiofb. If you want to compile it as a module,
1877 say M here and read <file:Documentation/kbuild/modules.txt>.
1878
1879 If unsure, say N.
1880
1881config FB_TMIO_ACCELL
1882 bool "tmiofb acceleration"
1883 depends on FB_TMIO
1884 default y
1885
Ben Dooksec549a02009-03-31 15:25:39 -07001886config FB_S3C
1887 tristate "Samsung S3C framebuffer support"
1888 depends on FB && ARCH_S3C64XX
1889 select FB_CFB_FILLRECT
1890 select FB_CFB_COPYAREA
1891 select FB_CFB_IMAGEBLIT
1892 ---help---
1893 Frame buffer driver for the built-in FB controller in the Samsung
1894 SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
1895 and the S3C64XX series such as the S3C6400 and S3C6410.
1896
1897 These chips all have the same basic framebuffer design with the
1898 actual capabilities depending on the chip. For instance the S3C6400
1899 and S3C6410 support 4 hardware windows whereas the S3C24XX series
1900 currently only have two.
1901
1902 Currently the support is only for the S3C6400 and S3C6410 SoCs.
1903
1904config FB_S3C_DEBUG_REGWRITE
1905 bool "Debug register writes"
1906 depends on FB_S3C
1907 ---help---
1908 Show all register writes via printk(KERN_DEBUG)
1909
Arnaud Patard20fd5762005-09-09 13:10:07 -07001910config FB_S3C2410
1911 tristate "S3C2410 LCD framebuffer support"
1912 depends on FB && ARCH_S3C2410
1913 select FB_CFB_FILLRECT
1914 select FB_CFB_COPYAREA
1915 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07001916 ---help---
1917 Frame buffer driver for the built-in LCD controller in the Samsung
1918 S3C2410 processor.
1919
1920 This driver is also available as a module ( = code which can be
1921 inserted and removed from the running kernel whenever you want). The
1922 module will be called s3c2410fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001923 say M here and read <file:Documentation/kbuild/modules.txt>.
Arnaud Patard20fd5762005-09-09 13:10:07 -07001924
1925 If unsure, say N.
1926config FB_S3C2410_DEBUG
1927 bool "S3C2410 lcd debug messages"
1928 depends on FB_S3C2410
1929 help
1930 Turn on debugging messages. Note that you can set/unset at run time
1931 through sysfs
1932
Ben Dooks5fc404e2007-02-20 13:58:21 -08001933config FB_SM501
1934 tristate "Silicon Motion SM501 framebuffer support"
1935 depends on FB && MFD_SM501
1936 select FB_CFB_FILLRECT
1937 select FB_CFB_COPYAREA
1938 select FB_CFB_IMAGEBLIT
1939 ---help---
1940 Frame buffer driver for the CRT and LCD controllers in the Silicon
1941 Motion SM501.
1942
1943 This driver is also available as a module ( = code which can be
1944 inserted and removed from the running kernel whenever you want). The
1945 module will be called sm501fb. If you want to compile it as a module,
Dirk Hohndele4031492007-10-30 13:37:19 -07001946 say M here and read <file:Documentation/kbuild/modules.txt>.
Ben Dooks5fc404e2007-02-20 13:58:21 -08001947
1948 If unsure, say N.
1949
1950
Vitaly Wool36c93662006-07-03 00:24:19 -07001951config FB_PNX4008_DUM
1952 tristate "Display Update Module support on Philips PNX4008 board"
1953 depends on FB && ARCH_PNX4008
1954 ---help---
1955 Say Y here to enable support for PNX4008 Display Update Module (DUM)
1956
1957config FB_PNX4008_DUM_RGB
1958 tristate "RGB Framebuffer support on Philips PNX4008 board"
1959 depends on FB_PNX4008_DUM
1960 select FB_CFB_FILLRECT
1961 select FB_CFB_COPYAREA
1962 select FB_CFB_IMAGEBLIT
1963 ---help---
1964 Say Y here to enable support for PNX4008 RGB Framebuffer
1965
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001966config FB_IBM_GXT4500
1967 tristate "Framebuffer support for IBM GXT4500P adaptor"
Randy Dunlap0058f472007-10-16 01:29:35 -07001968 depends on FB && PPC
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001969 select FB_CFB_FILLRECT
1970 select FB_CFB_COPYAREA
1971 select FB_CFB_IMAGEBLIT
1972 ---help---
1973 Say Y here to enable support for the IBM GXT4500P display
1974 adaptor, found on some IBM System P (pSeries) machines.
1975
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001976config FB_PS3
Geert Uytterhoeven9e6b99b2007-06-16 08:05:38 +10001977 tristate "PS3 GPU framebuffer driver"
1978 depends on FB && PS3_PS3AV
Geert Uytterhoeven92c45792007-05-23 13:57:50 -07001979 select FB_SYS_FILLRECT
1980 select FB_SYS_COPYAREA
1981 select FB_SYS_IMAGEBLIT
1982 select FB_SYS_FOPS
Geert Uytterhoeven23e9c942007-07-21 04:37:49 -07001983 select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001984 ---help---
1985 Include support for the virtual frame buffer in the PS3 platform.
1986
1987config FB_PS3_DEFAULT_SIZE_M
1988 int "PS3 default frame buffer size (in MiB)"
1989 depends on FB_PS3
Geert Uytterhoeven50b25292007-07-21 04:37:50 -07001990 default 9
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001991 ---help---
1992 This is the default size (in MiB) of the virtual frame buffer in
1993 the PS3.
1994 The default value can be overridden on the kernel command line
1995 using the "ps3fb" option (e.g. "ps3fb=9M");
1996
Andrei Konovalov147394c2007-05-08 00:40:18 -07001997config FB_XILINX
1998 tristate "Xilinx frame buffer support"
Michal Simek6fa612b2009-05-11 15:49:12 +02001999 depends on FB && (XILINX_VIRTEX || MICROBLAZE)
Andrei Konovalov147394c2007-05-08 00:40:18 -07002000 select FB_CFB_FILLRECT
2001 select FB_CFB_COPYAREA
2002 select FB_CFB_IMAGEBLIT
2003 ---help---
2004 Include support for the Xilinx ML300/ML403 reference design
2005 framebuffer. ML300 carries a 640*480 LCD display on the board,
2006 ML403 uses a standard DB15 VGA connector.
2007
Yoichi Yuasa5abe3b42008-07-23 21:31:40 -07002008config FB_COBALT
2009 tristate "Cobalt server LCD frame buffer support"
2010 depends on FB && MIPS_COBALT
2011
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002012config FB_SH7760
Nobuhiro Iwamatsu5c72f302008-11-21 14:35:29 +09002013 bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
2014 depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
2015 || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
2016 select FB_CFB_FILLRECT
2017 select FB_CFB_COPYAREA
2018 select FB_CFB_IMAGEBLIT
2019 ---help---
2020 Support for the SH7760/SH7763/SH7720/SH7721 integrated
2021 (D)STN/TFT LCD Controller.
2022 Supports display resolutions up to 1024x1024 pixel, grayscale and
2023 color operation, with depths ranging from 1 bpp to 8 bpp monochrome
2024 and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
2025 panels <= 320 pixel horizontal resolution.
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002026
Sudhakar Rajashekhara4ed824d2009-09-22 16:47:06 -07002027config FB_DA8XX
2028 tristate "DA8xx/OMAP-L1xx Framebuffer support"
2029 depends on FB && ARCH_DAVINCI_DA8XX
2030 select FB_CFB_FILLRECT
2031 select FB_CFB_COPYAREA
2032 select FB_CFB_IMAGEBLIT
2033 ---help---
2034 This is the frame buffer device driver for the TI LCD controller
2035 found on DA8xx/OMAP-L1xx SoCs.
2036 If unsure, say N.
2037
Linus Torvalds1da177e2005-04-16 15:20:36 -07002038config FB_VIRTUAL
2039 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2040 depends on FB
Antonino A. Daplas87b48842007-05-08 00:39:01 -07002041 select FB_SYS_FILLRECT
2042 select FB_SYS_COPYAREA
2043 select FB_SYS_IMAGEBLIT
Antonino A. Daplas52102c02007-05-08 00:39:07 -07002044 select FB_SYS_FOPS
Linus Torvalds1da177e2005-04-16 15:20:36 -07002045 ---help---
2046 This is a `virtual' frame buffer device. It operates on a chunk of
2047 unswappable kernel memory instead of on the memory of a graphics
2048 board. This means you cannot see any output sent to this frame
2049 buffer device, while it does consume precious memory. The main use
2050 of this frame buffer device is testing and debugging the frame
2051 buffer subsystem. Do NOT enable it for normal systems! To protect
2052 the innocent, it has to be enabled explicitly at boot time using the
2053 kernel option `video=vfb:'.
2054
2055 To compile this driver as a module, choose M here: the
Mike Frysinger66cf7512006-10-03 01:14:41 -07002056 module will be called vfb. In order to load it, you must use
2057 the vfb_enable=1 option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002058
2059 If unsure, say N.
James Simmonse0e34ef2007-02-10 14:15:43 +00002060
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002061config XEN_FBDEV_FRONTEND
2062 tristate "Xen virtual frame buffer support"
2063 depends on FB && XEN
2064 select FB_SYS_FILLRECT
2065 select FB_SYS_COPYAREA
2066 select FB_SYS_IMAGEBLIT
2067 select FB_SYS_FOPS
2068 select FB_DEFERRED_IO
Konrad Rzeszutek Wilkba69ea42009-10-08 13:23:08 -04002069 select XEN_XENBUS_FRONTEND
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002070 default y
2071 help
2072 This driver implements the front-end of the Xen virtual
2073 frame buffer driver. It communicates with a back-end
2074 in another domain.
2075
Jaya Kumare9355082008-08-19 11:17:55 +01002076config FB_METRONOME
2077 tristate "E-Ink Metronome/8track controller support"
2078 depends on FB
2079 select FB_SYS_FILLRECT
2080 select FB_SYS_COPYAREA
2081 select FB_SYS_IMAGEBLIT
2082 select FB_SYS_FOPS
2083 select FB_DEFERRED_IO
2084 help
2085 This driver implements support for the E-Ink Metronome
2086 controller. The pre-release name for this device was 8track
2087 and could also have been called by some vendors as PVI-nnnn.
2088
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002089config FB_MB862XX
2090 tristate "Fujitsu MB862xx GDC support"
2091 depends on FB
2092 select FB_CFB_FILLRECT
2093 select FB_CFB_COPYAREA
2094 select FB_CFB_IMAGEBLIT
2095 ---help---
2096 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2097
2098config FB_MB862XX_PCI_GDC
2099 bool "Carmine/Coral-P(A) GDC"
2100 depends on PCI && FB_MB862XX
2101 ---help---
2102 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2103 PCI graphics controller devices.
2104
2105config FB_MB862XX_LIME
2106 bool "Lime GDC"
2107 depends on FB_MB862XX
2108 depends on OF && !FB_MB862XX_PCI_GDC
Julian Calaby336e7472009-06-16 15:34:29 -07002109 depends on PPC
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002110 select FB_FOREIGN_ENDIAN
2111 select FB_LITTLE_ENDIAN
2112 ---help---
2113 Framebuffer support for Fujitsu Lime GDC on host CPU bus.
2114
Ryan Mallon88017bd2009-09-22 16:47:09 -07002115config FB_EP93XX
2116 tristate "EP93XX frame buffer support"
2117 depends on FB && ARCH_EP93XX
2118 select FB_CFB_FILLRECT
2119 select FB_CFB_COPYAREA
2120 select FB_CFB_IMAGEBLIT
2121 ---help---
2122 Framebuffer driver for the Cirrus Logic EP93XX series of processors.
2123 This driver is also available as a module. The module will be called
2124 ep93xx-fb.
2125
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002126config FB_PRE_INIT_FB
2127 bool "Don't reinitialize, use bootloader's GDC/Display configuration"
Guennadi Liakhovetski93f40e62009-11-11 14:26:47 -08002128 depends on FB && FB_MB862XX_LIME
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002129 ---help---
2130 Select this option if display contents should be inherited as set by
2131 the bootloader.
2132
Pavel Machekd480ace2009-09-22 16:47:03 -07002133config FB_MSM
Pavel Machek4e00dc72009-12-08 11:10:28 -08002134 tristate "MSM Framebuffer support"
Pavel Machekd480ace2009-09-22 16:47:03 -07002135 depends on FB && ARCH_MSM
2136 select FB_CFB_FILLRECT
2137 select FB_CFB_COPYAREA
2138 select FB_CFB_IMAGEBLIT
2139 default y
2140
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002141config FB_MX3
Guennadi Liakhovetski6e1588c2009-02-26 21:34:28 +01002142 tristate "MX3 Framebuffer support"
2143 depends on FB && MX3_IPU
2144 select FB_CFB_FILLRECT
2145 select FB_CFB_COPYAREA
2146 select FB_CFB_IMAGEBLIT
2147 default y
2148 help
2149 This is a framebuffer device for the i.MX31 LCD Controller. So
2150 far only synchronous displays are supported. If you plan to use
2151 an LCD display with your i.MX31 system, say Y here.
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002152
Jaya Kumar0d4ff4d2009-01-01 17:49:19 +01002153config FB_BROADSHEET
2154 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2155 depends on FB
2156 select FB_SYS_FILLRECT
2157 select FB_SYS_COPYAREA
2158 select FB_SYS_IMAGEBLIT
2159 select FB_SYS_FOPS
2160 select FB_DEFERRED_IO
2161 help
2162 This driver implements support for the E-Ink Broadsheet
2163 controller. The release name for this device was Epson S1D13521
2164 and could also have been called by other names when coupled with
2165 a bridge adapter.
2166
Randy Dunlapf08f3892007-10-29 14:37:16 -07002167source "drivers/video/omap/Kconfig"
Tomi Valkeinenafedec12009-08-07 12:01:55 +03002168source "drivers/video/omap2/Kconfig"
Randy Dunlap0058f472007-10-16 01:29:35 -07002169
Randy Dunlap179b0252007-10-16 01:29:39 -07002170source "drivers/video/backlight/Kconfig"
2171source "drivers/video/display/Kconfig"
2172
Linus Torvalds1da177e2005-04-16 15:20:36 -07002173if VT
2174 source "drivers/video/console/Kconfig"
2175endif
2176
2177if FB || SGI_NEWPORT_CONSOLE
2178 source "drivers/video/logo/Kconfig"
2179endif
2180
Linus Torvalds1da177e2005-04-16 15:20:36 -07002181endmenu