Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 1 | /** |
| 2 | * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI |
| 3 | * |
| 4 | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com |
| 5 | * Author: Keshava Munegowda <keshava_mgowda@ti.com> |
| 6 | * |
| 7 | * This program is free software: you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 of |
| 9 | * the License as published by the Free Software Foundation. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| 18 | */ |
| 19 | #include <linux/kernel.h> |
| 20 | #include <linux/types.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <linux/delay.h> |
| 23 | #include <linux/platform_device.h> |
| 24 | #include <linux/clk.h> |
| 25 | #include <linux/dma-mapping.h> |
| 26 | #include <linux/spinlock.h> |
| 27 | #include <linux/gpio.h> |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 28 | #include <plat/usb.h> |
Keshava Munegowda | 7e6502d | 2011-05-22 22:51:26 +0200 | [diff] [blame] | 29 | #include <linux/pm_runtime.h> |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 30 | |
| 31 | #define USBHS_DRIVER_NAME "usbhs-omap" |
| 32 | #define OMAP_EHCI_DEVICE "ehci-omap" |
| 33 | #define OMAP_OHCI_DEVICE "ohci-omap3" |
| 34 | |
| 35 | /* OMAP USBHOST Register addresses */ |
| 36 | |
| 37 | /* TLL Register Set */ |
| 38 | #define OMAP_USBTLL_REVISION (0x00) |
| 39 | #define OMAP_USBTLL_SYSCONFIG (0x10) |
| 40 | #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) |
| 41 | #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) |
| 42 | #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) |
| 43 | #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) |
| 44 | #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) |
| 45 | |
| 46 | #define OMAP_USBTLL_SYSSTATUS (0x14) |
| 47 | #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) |
| 48 | |
| 49 | #define OMAP_USBTLL_IRQSTATUS (0x18) |
| 50 | #define OMAP_USBTLL_IRQENABLE (0x1C) |
| 51 | |
| 52 | #define OMAP_TLL_SHARED_CONF (0x30) |
| 53 | #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) |
| 54 | #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) |
| 55 | #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) |
| 56 | #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) |
| 57 | #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) |
| 58 | |
| 59 | #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) |
| 60 | #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 |
| 61 | #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) |
| 62 | #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) |
| 63 | #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) |
| 64 | #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) |
| 65 | #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) |
| 66 | #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) |
| 67 | |
| 68 | #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 |
| 69 | #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 |
| 70 | #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 |
| 71 | #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 |
| 72 | #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 |
| 73 | #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 |
| 74 | #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 |
| 75 | #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 |
| 76 | #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA |
| 77 | #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB |
| 78 | |
| 79 | #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) |
| 80 | #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) |
| 81 | #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) |
| 82 | #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) |
| 83 | #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) |
| 84 | #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) |
| 85 | #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) |
| 86 | #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) |
| 87 | #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) |
| 88 | |
| 89 | #define OMAP_TLL_CHANNEL_COUNT 3 |
| 90 | #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) |
| 91 | #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) |
| 92 | #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) |
| 93 | |
| 94 | /* UHH Register Set */ |
| 95 | #define OMAP_UHH_REVISION (0x00) |
| 96 | #define OMAP_UHH_SYSCONFIG (0x10) |
| 97 | #define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) |
| 98 | #define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) |
| 99 | #define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) |
| 100 | #define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) |
| 101 | #define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) |
| 102 | #define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) |
| 103 | |
| 104 | #define OMAP_UHH_SYSSTATUS (0x14) |
| 105 | #define OMAP_UHH_HOSTCONFIG (0x40) |
| 106 | #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) |
| 107 | #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) |
| 108 | #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) |
| 109 | #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) |
| 110 | #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) |
| 111 | #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) |
| 112 | #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) |
| 113 | #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) |
| 114 | #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) |
| 115 | #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) |
| 116 | #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) |
| 117 | #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31) |
| 118 | |
| 119 | /* OMAP4-specific defines */ |
| 120 | #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) |
| 121 | #define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) |
| 122 | #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) |
| 123 | #define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) |
| 124 | #define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) |
| 125 | |
| 126 | #define OMAP4_P1_MODE_CLEAR (3 << 16) |
| 127 | #define OMAP4_P1_MODE_TLL (1 << 16) |
| 128 | #define OMAP4_P1_MODE_HSIC (3 << 16) |
| 129 | #define OMAP4_P2_MODE_CLEAR (3 << 18) |
| 130 | #define OMAP4_P2_MODE_TLL (1 << 18) |
| 131 | #define OMAP4_P2_MODE_HSIC (3 << 18) |
| 132 | |
| 133 | #define OMAP_REV2_TLL_CHANNEL_COUNT 2 |
| 134 | |
| 135 | #define OMAP_UHH_DEBUG_CSR (0x44) |
| 136 | |
| 137 | /* Values of UHH_REVISION - Note: these are not given in the TRM */ |
| 138 | #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ |
| 139 | #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ |
| 140 | |
| 141 | #define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1) |
| 142 | #define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2) |
| 143 | |
| 144 | #define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY) |
| 145 | #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) |
| 146 | #define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC) |
| 147 | |
| 148 | |
| 149 | struct usbhs_hcd_omap { |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 150 | struct clk *xclk60mhsp1_ck; |
| 151 | struct clk *xclk60mhsp2_ck; |
| 152 | struct clk *utmi_p1_fck; |
| 153 | struct clk *usbhost_p1_fck; |
| 154 | struct clk *usbtll_p1_fck; |
| 155 | struct clk *utmi_p2_fck; |
| 156 | struct clk *usbhost_p2_fck; |
| 157 | struct clk *usbtll_p2_fck; |
| 158 | struct clk *init_60m_fclk; |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 159 | |
| 160 | void __iomem *uhh_base; |
| 161 | void __iomem *tll_base; |
| 162 | |
| 163 | struct usbhs_omap_platform_data platdata; |
| 164 | |
| 165 | u32 usbhs_rev; |
| 166 | spinlock_t lock; |
| 167 | int count; |
| 168 | }; |
| 169 | /*-------------------------------------------------------------------------*/ |
| 170 | |
| 171 | const char usbhs_driver_name[] = USBHS_DRIVER_NAME; |
| 172 | static u64 usbhs_dmamask = ~(u32)0; |
| 173 | |
| 174 | /*-------------------------------------------------------------------------*/ |
| 175 | |
| 176 | static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) |
| 177 | { |
| 178 | __raw_writel(val, base + reg); |
| 179 | } |
| 180 | |
| 181 | static inline u32 usbhs_read(void __iomem *base, u32 reg) |
| 182 | { |
| 183 | return __raw_readl(base + reg); |
| 184 | } |
| 185 | |
| 186 | static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val) |
| 187 | { |
| 188 | __raw_writeb(val, base + reg); |
| 189 | } |
| 190 | |
| 191 | static inline u8 usbhs_readb(void __iomem *base, u8 reg) |
| 192 | { |
| 193 | return __raw_readb(base + reg); |
| 194 | } |
| 195 | |
| 196 | /*-------------------------------------------------------------------------*/ |
| 197 | |
| 198 | static struct platform_device *omap_usbhs_alloc_child(const char *name, |
| 199 | struct resource *res, int num_resources, void *pdata, |
| 200 | size_t pdata_size, struct device *dev) |
| 201 | { |
| 202 | struct platform_device *child; |
| 203 | int ret; |
| 204 | |
| 205 | child = platform_device_alloc(name, 0); |
| 206 | |
| 207 | if (!child) { |
| 208 | dev_err(dev, "platform_device_alloc %s failed\n", name); |
| 209 | goto err_end; |
| 210 | } |
| 211 | |
| 212 | ret = platform_device_add_resources(child, res, num_resources); |
| 213 | if (ret) { |
| 214 | dev_err(dev, "platform_device_add_resources failed\n"); |
| 215 | goto err_alloc; |
| 216 | } |
| 217 | |
| 218 | ret = platform_device_add_data(child, pdata, pdata_size); |
| 219 | if (ret) { |
| 220 | dev_err(dev, "platform_device_add_data failed\n"); |
| 221 | goto err_alloc; |
| 222 | } |
| 223 | |
| 224 | child->dev.dma_mask = &usbhs_dmamask; |
| 225 | child->dev.coherent_dma_mask = 0xffffffff; |
| 226 | child->dev.parent = dev; |
| 227 | |
| 228 | ret = platform_device_add(child); |
| 229 | if (ret) { |
| 230 | dev_err(dev, "platform_device_add failed\n"); |
| 231 | goto err_alloc; |
| 232 | } |
| 233 | |
| 234 | return child; |
| 235 | |
| 236 | err_alloc: |
| 237 | platform_device_put(child); |
| 238 | |
| 239 | err_end: |
| 240 | return NULL; |
| 241 | } |
| 242 | |
| 243 | static int omap_usbhs_alloc_children(struct platform_device *pdev) |
| 244 | { |
| 245 | struct device *dev = &pdev->dev; |
| 246 | struct usbhs_hcd_omap *omap; |
| 247 | struct ehci_hcd_omap_platform_data *ehci_data; |
| 248 | struct ohci_hcd_omap_platform_data *ohci_data; |
| 249 | struct platform_device *ehci; |
| 250 | struct platform_device *ohci; |
| 251 | struct resource *res; |
| 252 | struct resource resources[2]; |
| 253 | int ret; |
| 254 | |
| 255 | omap = platform_get_drvdata(pdev); |
| 256 | ehci_data = omap->platdata.ehci_data; |
| 257 | ohci_data = omap->platdata.ohci_data; |
| 258 | |
| 259 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); |
| 260 | if (!res) { |
| 261 | dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); |
| 262 | ret = -ENODEV; |
| 263 | goto err_end; |
| 264 | } |
| 265 | resources[0] = *res; |
| 266 | |
| 267 | res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); |
| 268 | if (!res) { |
| 269 | dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); |
| 270 | ret = -ENODEV; |
| 271 | goto err_end; |
| 272 | } |
| 273 | resources[1] = *res; |
| 274 | |
| 275 | ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data, |
| 276 | sizeof(*ehci_data), dev); |
| 277 | |
| 278 | if (!ehci) { |
| 279 | dev_err(dev, "omap_usbhs_alloc_child failed\n"); |
Axel Lin | d910774 | 2011-05-14 14:15:36 +0800 | [diff] [blame] | 280 | ret = -ENOMEM; |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 281 | goto err_end; |
| 282 | } |
| 283 | |
| 284 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); |
| 285 | if (!res) { |
| 286 | dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); |
| 287 | ret = -ENODEV; |
| 288 | goto err_ehci; |
| 289 | } |
| 290 | resources[0] = *res; |
| 291 | |
| 292 | res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); |
| 293 | if (!res) { |
| 294 | dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); |
| 295 | ret = -ENODEV; |
| 296 | goto err_ehci; |
| 297 | } |
| 298 | resources[1] = *res; |
| 299 | |
| 300 | ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data, |
| 301 | sizeof(*ohci_data), dev); |
| 302 | if (!ohci) { |
| 303 | dev_err(dev, "omap_usbhs_alloc_child failed\n"); |
Axel Lin | d910774 | 2011-05-14 14:15:36 +0800 | [diff] [blame] | 304 | ret = -ENOMEM; |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 305 | goto err_ehci; |
| 306 | } |
| 307 | |
| 308 | return 0; |
| 309 | |
| 310 | err_ehci: |
Axel Lin | d910774 | 2011-05-14 14:15:36 +0800 | [diff] [blame] | 311 | platform_device_unregister(ehci); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 312 | |
| 313 | err_end: |
| 314 | return ret; |
| 315 | } |
| 316 | |
| 317 | /** |
| 318 | * usbhs_omap_probe - initialize TI-based HCDs |
| 319 | * |
| 320 | * Allocates basic resources for this USB host controller. |
| 321 | */ |
| 322 | static int __devinit usbhs_omap_probe(struct platform_device *pdev) |
| 323 | { |
| 324 | struct device *dev = &pdev->dev; |
| 325 | struct usbhs_omap_platform_data *pdata = dev->platform_data; |
| 326 | struct usbhs_hcd_omap *omap; |
| 327 | struct resource *res; |
| 328 | int ret = 0; |
| 329 | int i; |
| 330 | |
| 331 | if (!pdata) { |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 332 | dev_err(dev, "Missing platform data\n"); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 333 | ret = -ENOMEM; |
| 334 | goto end_probe; |
| 335 | } |
| 336 | |
| 337 | omap = kzalloc(sizeof(*omap), GFP_KERNEL); |
| 338 | if (!omap) { |
| 339 | dev_err(dev, "Memory allocation failed\n"); |
| 340 | ret = -ENOMEM; |
| 341 | goto end_probe; |
| 342 | } |
| 343 | |
| 344 | spin_lock_init(&omap->lock); |
| 345 | |
| 346 | for (i = 0; i < OMAP3_HS_USB_PORTS; i++) |
| 347 | omap->platdata.port_mode[i] = pdata->port_mode[i]; |
| 348 | |
| 349 | omap->platdata.ehci_data = pdata->ehci_data; |
| 350 | omap->platdata.ohci_data = pdata->ohci_data; |
| 351 | |
Keshava Munegowda | 7e6502d | 2011-05-22 22:51:26 +0200 | [diff] [blame] | 352 | pm_runtime_enable(&pdev->dev); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 353 | |
| 354 | omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); |
| 355 | if (IS_ERR(omap->utmi_p1_fck)) { |
| 356 | ret = PTR_ERR(omap->utmi_p1_fck); |
| 357 | dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); |
Keshava Munegowda | 7e6502d | 2011-05-22 22:51:26 +0200 | [diff] [blame] | 358 | goto err_end; |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 359 | } |
| 360 | |
| 361 | omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); |
| 362 | if (IS_ERR(omap->xclk60mhsp1_ck)) { |
| 363 | ret = PTR_ERR(omap->xclk60mhsp1_ck); |
| 364 | dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); |
| 365 | goto err_utmi_p1_fck; |
| 366 | } |
| 367 | |
| 368 | omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); |
| 369 | if (IS_ERR(omap->utmi_p2_fck)) { |
| 370 | ret = PTR_ERR(omap->utmi_p2_fck); |
| 371 | dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); |
| 372 | goto err_xclk60mhsp1_ck; |
| 373 | } |
| 374 | |
| 375 | omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); |
| 376 | if (IS_ERR(omap->xclk60mhsp2_ck)) { |
| 377 | ret = PTR_ERR(omap->xclk60mhsp2_ck); |
| 378 | dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); |
| 379 | goto err_utmi_p2_fck; |
| 380 | } |
| 381 | |
| 382 | omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); |
| 383 | if (IS_ERR(omap->usbhost_p1_fck)) { |
| 384 | ret = PTR_ERR(omap->usbhost_p1_fck); |
| 385 | dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); |
| 386 | goto err_xclk60mhsp2_ck; |
| 387 | } |
| 388 | |
| 389 | omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); |
| 390 | if (IS_ERR(omap->usbtll_p1_fck)) { |
| 391 | ret = PTR_ERR(omap->usbtll_p1_fck); |
| 392 | dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); |
| 393 | goto err_usbhost_p1_fck; |
| 394 | } |
| 395 | |
| 396 | omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); |
| 397 | if (IS_ERR(omap->usbhost_p2_fck)) { |
| 398 | ret = PTR_ERR(omap->usbhost_p2_fck); |
| 399 | dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); |
| 400 | goto err_usbtll_p1_fck; |
| 401 | } |
| 402 | |
| 403 | omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); |
| 404 | if (IS_ERR(omap->usbtll_p2_fck)) { |
| 405 | ret = PTR_ERR(omap->usbtll_p2_fck); |
| 406 | dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); |
| 407 | goto err_usbhost_p2_fck; |
| 408 | } |
| 409 | |
| 410 | omap->init_60m_fclk = clk_get(dev, "init_60m_fclk"); |
| 411 | if (IS_ERR(omap->init_60m_fclk)) { |
| 412 | ret = PTR_ERR(omap->init_60m_fclk); |
| 413 | dev_err(dev, "init_60m_fclk failed error:%d\n", ret); |
| 414 | goto err_usbtll_p2_fck; |
| 415 | } |
| 416 | |
| 417 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); |
| 418 | if (!res) { |
| 419 | dev_err(dev, "UHH EHCI get resource failed\n"); |
| 420 | ret = -ENODEV; |
| 421 | goto err_init_60m_fclk; |
| 422 | } |
| 423 | |
| 424 | omap->uhh_base = ioremap(res->start, resource_size(res)); |
| 425 | if (!omap->uhh_base) { |
| 426 | dev_err(dev, "UHH ioremap failed\n"); |
| 427 | ret = -ENOMEM; |
| 428 | goto err_init_60m_fclk; |
| 429 | } |
| 430 | |
| 431 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll"); |
| 432 | if (!res) { |
| 433 | dev_err(dev, "UHH EHCI get resource failed\n"); |
| 434 | ret = -ENODEV; |
| 435 | goto err_tll; |
| 436 | } |
| 437 | |
| 438 | omap->tll_base = ioremap(res->start, resource_size(res)); |
| 439 | if (!omap->tll_base) { |
| 440 | dev_err(dev, "TLL ioremap failed\n"); |
| 441 | ret = -ENOMEM; |
| 442 | goto err_tll; |
| 443 | } |
| 444 | |
| 445 | platform_set_drvdata(pdev, omap); |
| 446 | |
| 447 | ret = omap_usbhs_alloc_children(pdev); |
| 448 | if (ret) { |
| 449 | dev_err(dev, "omap_usbhs_alloc_children failed\n"); |
| 450 | goto err_alloc; |
| 451 | } |
| 452 | |
| 453 | goto end_probe; |
| 454 | |
| 455 | err_alloc: |
| 456 | iounmap(omap->tll_base); |
| 457 | |
| 458 | err_tll: |
| 459 | iounmap(omap->uhh_base); |
| 460 | |
| 461 | err_init_60m_fclk: |
| 462 | clk_put(omap->init_60m_fclk); |
| 463 | |
| 464 | err_usbtll_p2_fck: |
| 465 | clk_put(omap->usbtll_p2_fck); |
| 466 | |
| 467 | err_usbhost_p2_fck: |
| 468 | clk_put(omap->usbhost_p2_fck); |
| 469 | |
| 470 | err_usbtll_p1_fck: |
| 471 | clk_put(omap->usbtll_p1_fck); |
| 472 | |
| 473 | err_usbhost_p1_fck: |
| 474 | clk_put(omap->usbhost_p1_fck); |
| 475 | |
| 476 | err_xclk60mhsp2_ck: |
| 477 | clk_put(omap->xclk60mhsp2_ck); |
| 478 | |
| 479 | err_utmi_p2_fck: |
| 480 | clk_put(omap->utmi_p2_fck); |
| 481 | |
| 482 | err_xclk60mhsp1_ck: |
| 483 | clk_put(omap->xclk60mhsp1_ck); |
| 484 | |
| 485 | err_utmi_p1_fck: |
| 486 | clk_put(omap->utmi_p1_fck); |
| 487 | |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 488 | err_end: |
Keshava Munegowda | 7e6502d | 2011-05-22 22:51:26 +0200 | [diff] [blame] | 489 | pm_runtime_disable(&pdev->dev); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 490 | kfree(omap); |
| 491 | |
| 492 | end_probe: |
| 493 | return ret; |
| 494 | } |
| 495 | |
| 496 | /** |
| 497 | * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs |
| 498 | * @pdev: USB Host Controller being removed |
| 499 | * |
| 500 | * Reverses the effect of usbhs_omap_probe(). |
| 501 | */ |
| 502 | static int __devexit usbhs_omap_remove(struct platform_device *pdev) |
| 503 | { |
| 504 | struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); |
| 505 | |
| 506 | if (omap->count != 0) { |
| 507 | dev_err(&pdev->dev, |
| 508 | "Either EHCI or OHCI is still using usbhs core\n"); |
| 509 | return -EBUSY; |
| 510 | } |
| 511 | |
| 512 | iounmap(omap->tll_base); |
| 513 | iounmap(omap->uhh_base); |
| 514 | clk_put(omap->init_60m_fclk); |
| 515 | clk_put(omap->usbtll_p2_fck); |
| 516 | clk_put(omap->usbhost_p2_fck); |
| 517 | clk_put(omap->usbtll_p1_fck); |
| 518 | clk_put(omap->usbhost_p1_fck); |
| 519 | clk_put(omap->xclk60mhsp2_ck); |
| 520 | clk_put(omap->utmi_p2_fck); |
| 521 | clk_put(omap->xclk60mhsp1_ck); |
| 522 | clk_put(omap->utmi_p1_fck); |
Keshava Munegowda | 7e6502d | 2011-05-22 22:51:26 +0200 | [diff] [blame] | 523 | pm_runtime_disable(&pdev->dev); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 524 | kfree(omap); |
| 525 | |
| 526 | return 0; |
| 527 | } |
| 528 | |
| 529 | static bool is_ohci_port(enum usbhs_omap_port_mode pmode) |
| 530 | { |
| 531 | switch (pmode) { |
| 532 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |
| 533 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: |
| 534 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: |
| 535 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: |
| 536 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: |
| 537 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: |
| 538 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: |
| 539 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: |
| 540 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: |
| 541 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: |
| 542 | return true; |
| 543 | |
| 544 | default: |
| 545 | return false; |
| 546 | } |
| 547 | } |
| 548 | |
| 549 | /* |
| 550 | * convert the port-mode enum to a value we can use in the FSLSMODE |
| 551 | * field of USBTLL_CHANNEL_CONF |
| 552 | */ |
| 553 | static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) |
| 554 | { |
| 555 | switch (mode) { |
| 556 | case OMAP_USBHS_PORT_MODE_UNUSED: |
| 557 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |
| 558 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; |
| 559 | |
| 560 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: |
| 561 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; |
| 562 | |
| 563 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: |
| 564 | return OMAP_TLL_FSLSMODE_3PIN_PHY; |
| 565 | |
| 566 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: |
| 567 | return OMAP_TLL_FSLSMODE_4PIN_PHY; |
| 568 | |
| 569 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: |
| 570 | return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; |
| 571 | |
| 572 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: |
| 573 | return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; |
| 574 | |
| 575 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: |
| 576 | return OMAP_TLL_FSLSMODE_3PIN_TLL; |
| 577 | |
| 578 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: |
| 579 | return OMAP_TLL_FSLSMODE_4PIN_TLL; |
| 580 | |
| 581 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: |
| 582 | return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; |
| 583 | |
| 584 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: |
| 585 | return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; |
| 586 | default: |
| 587 | pr_warning("Invalid port mode, using default\n"); |
| 588 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; |
| 589 | } |
| 590 | } |
| 591 | |
| 592 | static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count) |
| 593 | { |
| 594 | struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| 595 | struct usbhs_omap_platform_data *pdata = dev->platform_data; |
| 596 | unsigned reg; |
| 597 | int i; |
| 598 | |
| 599 | /* Program Common TLL register */ |
| 600 | reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF); |
| 601 | reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON |
| 602 | | OMAP_TLL_SHARED_CONF_USB_DIVRATION); |
| 603 | reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; |
| 604 | reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; |
| 605 | |
| 606 | usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); |
| 607 | |
| 608 | /* Enable channels now */ |
| 609 | for (i = 0; i < tll_channel_count; i++) { |
| 610 | reg = usbhs_read(omap->tll_base, |
| 611 | OMAP_TLL_CHANNEL_CONF(i)); |
| 612 | |
| 613 | if (is_ohci_port(pdata->port_mode[i])) { |
| 614 | reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) |
| 615 | << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; |
| 616 | reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; |
| 617 | } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) { |
| 618 | |
| 619 | /* Disable AutoIdle, BitStuffing and use SDR Mode */ |
| 620 | reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE |
| 621 | | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF |
| 622 | | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); |
| 623 | |
| 624 | reg |= (1 << (i + 1)); |
| 625 | } else |
| 626 | continue; |
| 627 | |
| 628 | reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; |
| 629 | usbhs_write(omap->tll_base, |
| 630 | OMAP_TLL_CHANNEL_CONF(i), reg); |
| 631 | |
| 632 | usbhs_writeb(omap->tll_base, |
| 633 | OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); |
| 634 | } |
| 635 | } |
| 636 | |
| 637 | static int usbhs_enable(struct device *dev) |
| 638 | { |
| 639 | struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| 640 | struct usbhs_omap_platform_data *pdata = &omap->platdata; |
| 641 | unsigned long flags = 0; |
| 642 | int ret = 0; |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 643 | unsigned reg; |
| 644 | |
| 645 | dev_dbg(dev, "starting TI HSUSB Controller\n"); |
| 646 | if (!pdata) { |
| 647 | dev_dbg(dev, "missing platform_data\n"); |
Axel Lin | d11536e | 2011-04-21 19:52:41 +0530 | [diff] [blame] | 648 | return -ENODEV; |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 649 | } |
| 650 | |
| 651 | spin_lock_irqsave(&omap->lock, flags); |
| 652 | if (omap->count > 0) |
| 653 | goto end_count; |
| 654 | |
Keshava Munegowda | 7e6502d | 2011-05-22 22:51:26 +0200 | [diff] [blame] | 655 | pm_runtime_get_sync(dev); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 656 | |
| 657 | if (pdata->ehci_data->phy_reset) { |
| 658 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) { |
| 659 | gpio_request(pdata->ehci_data->reset_gpio_port[0], |
| 660 | "USB1 PHY reset"); |
| 661 | gpio_direction_output |
Juergen Kilb | 557f447 | 2011-04-14 09:31:43 +0200 | [diff] [blame] | 662 | (pdata->ehci_data->reset_gpio_port[0], 0); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 663 | } |
| 664 | |
| 665 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) { |
| 666 | gpio_request(pdata->ehci_data->reset_gpio_port[1], |
| 667 | "USB2 PHY reset"); |
| 668 | gpio_direction_output |
Juergen Kilb | 557f447 | 2011-04-14 09:31:43 +0200 | [diff] [blame] | 669 | (pdata->ehci_data->reset_gpio_port[1], 0); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 670 | } |
| 671 | |
| 672 | /* Hold the PHY in RESET for enough time till DIR is high */ |
| 673 | udelay(10); |
| 674 | } |
| 675 | |
| 676 | omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); |
| 677 | dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); |
| 678 | |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 679 | reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); |
| 680 | /* setup ULPI bypass and burst configurations */ |
| 681 | reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN |
| 682 | | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN |
| 683 | | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); |
| 684 | reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; |
| 685 | reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; |
| 686 | |
| 687 | if (is_omap_usbhs_rev1(omap)) { |
| 688 | if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) |
| 689 | reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; |
| 690 | if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) |
| 691 | reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; |
| 692 | if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) |
| 693 | reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; |
| 694 | |
| 695 | /* Bypass the TLL module for PHY mode operation */ |
| 696 | if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { |
| 697 | dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); |
| 698 | if (is_ehci_phy_mode(pdata->port_mode[0]) || |
| 699 | is_ehci_phy_mode(pdata->port_mode[1]) || |
| 700 | is_ehci_phy_mode(pdata->port_mode[2])) |
| 701 | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; |
| 702 | else |
| 703 | reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; |
| 704 | } else { |
| 705 | dev_dbg(dev, "OMAP3 ES version > ES2.1\n"); |
| 706 | if (is_ehci_phy_mode(pdata->port_mode[0])) |
| 707 | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; |
| 708 | else |
| 709 | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; |
| 710 | if (is_ehci_phy_mode(pdata->port_mode[1])) |
| 711 | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; |
| 712 | else |
| 713 | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; |
| 714 | if (is_ehci_phy_mode(pdata->port_mode[2])) |
| 715 | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; |
| 716 | else |
| 717 | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; |
| 718 | } |
| 719 | } else if (is_omap_usbhs_rev2(omap)) { |
| 720 | /* Clear port mode fields for PHY mode*/ |
| 721 | reg &= ~OMAP4_P1_MODE_CLEAR; |
| 722 | reg &= ~OMAP4_P2_MODE_CLEAR; |
| 723 | |
| 724 | if (is_ehci_phy_mode(pdata->port_mode[0])) { |
| 725 | ret = clk_set_parent(omap->utmi_p1_fck, |
| 726 | omap->xclk60mhsp1_ck); |
| 727 | if (ret != 0) { |
| 728 | dev_err(dev, "xclk60mhsp1_ck set parent" |
| 729 | "failed error:%d\n", ret); |
| 730 | goto err_tll; |
| 731 | } |
| 732 | } else if (is_ehci_tll_mode(pdata->port_mode[0])) { |
| 733 | ret = clk_set_parent(omap->utmi_p1_fck, |
| 734 | omap->init_60m_fclk); |
| 735 | if (ret != 0) { |
| 736 | dev_err(dev, "init_60m_fclk set parent" |
| 737 | "failed error:%d\n", ret); |
| 738 | goto err_tll; |
| 739 | } |
| 740 | clk_enable(omap->usbhost_p1_fck); |
| 741 | clk_enable(omap->usbtll_p1_fck); |
| 742 | } |
| 743 | |
| 744 | if (is_ehci_phy_mode(pdata->port_mode[1])) { |
| 745 | ret = clk_set_parent(omap->utmi_p2_fck, |
| 746 | omap->xclk60mhsp2_ck); |
| 747 | if (ret != 0) { |
| 748 | dev_err(dev, "xclk60mhsp1_ck set parent" |
| 749 | "failed error:%d\n", ret); |
| 750 | goto err_tll; |
| 751 | } |
| 752 | } else if (is_ehci_tll_mode(pdata->port_mode[1])) { |
| 753 | ret = clk_set_parent(omap->utmi_p2_fck, |
| 754 | omap->init_60m_fclk); |
| 755 | if (ret != 0) { |
| 756 | dev_err(dev, "init_60m_fclk set parent" |
| 757 | "failed error:%d\n", ret); |
| 758 | goto err_tll; |
| 759 | } |
| 760 | clk_enable(omap->usbhost_p2_fck); |
| 761 | clk_enable(omap->usbtll_p2_fck); |
| 762 | } |
| 763 | |
| 764 | clk_enable(omap->utmi_p1_fck); |
| 765 | clk_enable(omap->utmi_p2_fck); |
| 766 | |
| 767 | if (is_ehci_tll_mode(pdata->port_mode[0]) || |
| 768 | (is_ohci_port(pdata->port_mode[0]))) |
| 769 | reg |= OMAP4_P1_MODE_TLL; |
| 770 | else if (is_ehci_hsic_mode(pdata->port_mode[0])) |
| 771 | reg |= OMAP4_P1_MODE_HSIC; |
| 772 | |
| 773 | if (is_ehci_tll_mode(pdata->port_mode[1]) || |
| 774 | (is_ohci_port(pdata->port_mode[1]))) |
| 775 | reg |= OMAP4_P2_MODE_TLL; |
| 776 | else if (is_ehci_hsic_mode(pdata->port_mode[1])) |
| 777 | reg |= OMAP4_P2_MODE_HSIC; |
| 778 | } |
| 779 | |
| 780 | usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); |
| 781 | dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); |
| 782 | |
| 783 | if (is_ehci_tll_mode(pdata->port_mode[0]) || |
| 784 | is_ehci_tll_mode(pdata->port_mode[1]) || |
| 785 | is_ehci_tll_mode(pdata->port_mode[2]) || |
| 786 | (is_ohci_port(pdata->port_mode[0])) || |
| 787 | (is_ohci_port(pdata->port_mode[1])) || |
| 788 | (is_ohci_port(pdata->port_mode[2]))) { |
| 789 | |
| 790 | /* Enable UTMI mode for required TLL channels */ |
| 791 | if (is_omap_usbhs_rev2(omap)) |
| 792 | usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT); |
| 793 | else |
| 794 | usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); |
| 795 | } |
| 796 | |
| 797 | if (pdata->ehci_data->phy_reset) { |
| 798 | /* Hold the PHY in RESET for enough time till |
| 799 | * PHY is settled and ready |
| 800 | */ |
| 801 | udelay(10); |
| 802 | |
| 803 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) |
| 804 | gpio_set_value |
Juergen Kilb | 557f447 | 2011-04-14 09:31:43 +0200 | [diff] [blame] | 805 | (pdata->ehci_data->reset_gpio_port[0], 1); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 806 | |
| 807 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) |
| 808 | gpio_set_value |
Juergen Kilb | 557f447 | 2011-04-14 09:31:43 +0200 | [diff] [blame] | 809 | (pdata->ehci_data->reset_gpio_port[1], 1); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 810 | } |
| 811 | |
| 812 | end_count: |
| 813 | omap->count++; |
Axel Lin | d11536e | 2011-04-21 19:52:41 +0530 | [diff] [blame] | 814 | spin_unlock_irqrestore(&omap->lock, flags); |
| 815 | return 0; |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 816 | |
| 817 | err_tll: |
Keshava Munegowda | 7e6502d | 2011-05-22 22:51:26 +0200 | [diff] [blame] | 818 | pm_runtime_put_sync(dev); |
| 819 | spin_unlock_irqrestore(&omap->lock, flags); |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 820 | if (pdata->ehci_data->phy_reset) { |
| 821 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) |
| 822 | gpio_free(pdata->ehci_data->reset_gpio_port[0]); |
| 823 | |
| 824 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) |
| 825 | gpio_free(pdata->ehci_data->reset_gpio_port[1]); |
| 826 | } |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 827 | return ret; |
| 828 | } |
| 829 | |
| 830 | static void usbhs_disable(struct device *dev) |
| 831 | { |
| 832 | struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| 833 | struct usbhs_omap_platform_data *pdata = &omap->platdata; |
| 834 | unsigned long flags = 0; |
| 835 | unsigned long timeout; |
| 836 | |
| 837 | dev_dbg(dev, "stopping TI HSUSB Controller\n"); |
| 838 | |
| 839 | spin_lock_irqsave(&omap->lock, flags); |
| 840 | |
| 841 | if (omap->count == 0) |
| 842 | goto end_disble; |
| 843 | |
| 844 | omap->count--; |
| 845 | |
| 846 | if (omap->count != 0) |
| 847 | goto end_disble; |
| 848 | |
| 849 | /* Reset OMAP modules for insmod/rmmod to work */ |
| 850 | usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, |
| 851 | is_omap_usbhs_rev2(omap) ? |
| 852 | OMAP4_UHH_SYSCONFIG_SOFTRESET : |
| 853 | OMAP_UHH_SYSCONFIG_SOFTRESET); |
| 854 | |
| 855 | timeout = jiffies + msecs_to_jiffies(100); |
| 856 | while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) |
| 857 | & (1 << 0))) { |
| 858 | cpu_relax(); |
| 859 | |
| 860 | if (time_after(jiffies, timeout)) |
| 861 | dev_dbg(dev, "operation timed out\n"); |
| 862 | } |
| 863 | |
| 864 | while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) |
| 865 | & (1 << 1))) { |
| 866 | cpu_relax(); |
| 867 | |
| 868 | if (time_after(jiffies, timeout)) |
| 869 | dev_dbg(dev, "operation timed out\n"); |
| 870 | } |
| 871 | |
| 872 | while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) |
| 873 | & (1 << 2))) { |
| 874 | cpu_relax(); |
| 875 | |
| 876 | if (time_after(jiffies, timeout)) |
| 877 | dev_dbg(dev, "operation timed out\n"); |
| 878 | } |
| 879 | |
| 880 | usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); |
| 881 | |
| 882 | while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) |
| 883 | & (1 << 0))) { |
| 884 | cpu_relax(); |
| 885 | |
| 886 | if (time_after(jiffies, timeout)) |
| 887 | dev_dbg(dev, "operation timed out\n"); |
| 888 | } |
| 889 | |
Keshava Munegowda | 6eb6fbb | 2011-05-16 14:24:58 +0530 | [diff] [blame] | 890 | if (is_omap_usbhs_rev2(omap)) { |
| 891 | if (is_ehci_tll_mode(pdata->port_mode[0])) |
| 892 | clk_enable(omap->usbtll_p1_fck); |
| 893 | if (is_ehci_tll_mode(pdata->port_mode[1])) |
| 894 | clk_enable(omap->usbtll_p2_fck); |
| 895 | clk_disable(omap->utmi_p2_fck); |
| 896 | clk_disable(omap->utmi_p1_fck); |
| 897 | } |
| 898 | |
Keshava Munegowda | 7e6502d | 2011-05-22 22:51:26 +0200 | [diff] [blame] | 899 | pm_runtime_put_sync(dev); |
Keshava Munegowda | 6eb6fbb | 2011-05-16 14:24:58 +0530 | [diff] [blame] | 900 | |
| 901 | /* The gpio_free migh sleep; so unlock the spinlock */ |
| 902 | spin_unlock_irqrestore(&omap->lock, flags); |
| 903 | |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 904 | if (pdata->ehci_data->phy_reset) { |
| 905 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) |
| 906 | gpio_free(pdata->ehci_data->reset_gpio_port[0]); |
| 907 | |
| 908 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) |
| 909 | gpio_free(pdata->ehci_data->reset_gpio_port[1]); |
| 910 | } |
Keshava Munegowda | 6eb6fbb | 2011-05-16 14:24:58 +0530 | [diff] [blame] | 911 | return; |
Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 912 | |
| 913 | end_disble: |
| 914 | spin_unlock_irqrestore(&omap->lock, flags); |
| 915 | } |
| 916 | |
| 917 | int omap_usbhs_enable(struct device *dev) |
| 918 | { |
| 919 | return usbhs_enable(dev->parent); |
| 920 | } |
| 921 | EXPORT_SYMBOL_GPL(omap_usbhs_enable); |
| 922 | |
| 923 | void omap_usbhs_disable(struct device *dev) |
| 924 | { |
| 925 | usbhs_disable(dev->parent); |
| 926 | } |
| 927 | EXPORT_SYMBOL_GPL(omap_usbhs_disable); |
| 928 | |
| 929 | static struct platform_driver usbhs_omap_driver = { |
| 930 | .driver = { |
| 931 | .name = (char *)usbhs_driver_name, |
| 932 | .owner = THIS_MODULE, |
| 933 | }, |
| 934 | .remove = __exit_p(usbhs_omap_remove), |
| 935 | }; |
| 936 | |
| 937 | MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); |
| 938 | MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); |
| 939 | MODULE_LICENSE("GPL v2"); |
| 940 | MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); |
| 941 | |
| 942 | static int __init omap_usbhs_drvinit(void) |
| 943 | { |
| 944 | return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); |
| 945 | } |
| 946 | |
| 947 | /* |
| 948 | * init before ehci and ohci drivers; |
| 949 | * The usbhs core driver should be initialized much before |
| 950 | * the omap ehci and ohci probe functions are called. |
| 951 | */ |
| 952 | fs_initcall(omap_usbhs_drvinit); |
| 953 | |
| 954 | static void __exit omap_usbhs_drvexit(void) |
| 955 | { |
| 956 | platform_driver_unregister(&usbhs_omap_driver); |
| 957 | } |
| 958 | module_exit(omap_usbhs_drvexit); |