blob: e020c2774606884e1dfcfa8f5dbd76f94887ca6e [file] [log] [blame]
Marek Vasutec70e8a2006-12-06 17:13:57 -08001/*
2 * linux/arch/arm/mach-omap1/board-palmz71.c
3 *
4 * Modified from board-generic.c
5 *
6 * Support for the Palm Zire71 PDA.
7 *
8 * Original version : Laurent Gonzalez
9 *
10 * Modified for zire71 : Marek Vasut
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
16
17#include <linux/delay.h>
18#include <linux/kernel.h>
19#include <linux/init.h>
20#include <linux/platform_device.h>
21#include <linux/notifier.h>
22#include <linux/clk.h>
23#include <linux/irq.h>
24#include <linux/input.h>
25#include <linux/interrupt.h>
26#include <linux/mtd/mtd.h>
27#include <linux/mtd/partitions.h>
28
29#include <asm/hardware.h>
30#include <asm/mach-types.h>
31#include <asm/mach/arch.h>
32#include <asm/mach/map.h>
33#include <asm/mach/flash.h>
34
35#include <asm/arch/mcbsp.h>
36#include <asm/arch/gpio.h>
37#include <asm/arch/mux.h>
38#include <asm/arch/usb.h>
39#include <asm/arch/dma.h>
40#include <asm/arch/tc.h>
41#include <asm/arch/board.h>
42#include <asm/arch/irda.h>
43#include <asm/arch/keypad.h>
44#include <asm/arch/common.h>
45#include <asm/arch/omap-alsa.h>
46
Marek Vasutec70e8a2006-12-06 17:13:57 -080047#include <linux/spi/spi.h>
48#include <linux/spi/ads7846.h>
49
50static void __init
51omap_palmz71_init_irq(void)
52{
53 omap1_init_common_hw();
54 omap_init_irq();
55 omap_gpio_init();
56}
57
58static int palmz71_keymap[] = {
59 KEY(0, 0, KEY_F1),
60 KEY(0, 1, KEY_F2),
61 KEY(0, 2, KEY_F3),
62 KEY(0, 3, KEY_F4),
63 KEY(0, 4, KEY_POWER),
64 KEY(1, 0, KEY_LEFT),
65 KEY(1, 1, KEY_DOWN),
66 KEY(1, 2, KEY_UP),
67 KEY(1, 3, KEY_RIGHT),
Eduardo Valentinec44dfa2008-03-27 11:09:42 -040068 KEY(1, 4, KEY_ENTER),
Marek Vasutec70e8a2006-12-06 17:13:57 -080069 KEY(2, 0, KEY_CAMERA),
70 0,
71};
72
73static struct omap_kp_platform_data palmz71_kp_data = {
74 .rows = 8,
75 .cols = 8,
76 .keymap = palmz71_keymap,
77 .rep = 1,
78 .delay = 80,
79};
80
81static struct resource palmz71_kp_resources[] = {
82 [0] = {
83 .start = INT_KEYBOARD,
84 .end = INT_KEYBOARD,
85 .flags = IORESOURCE_IRQ,
86 },
87};
88
89static struct platform_device palmz71_kp_device = {
90 .name = "omap-keypad",
91 .id = -1,
92 .dev = {
93 .platform_data = &palmz71_kp_data,
94 },
95 .num_resources = ARRAY_SIZE(palmz71_kp_resources),
96 .resource = palmz71_kp_resources,
97};
98
99static struct mtd_partition palmz71_rom_partitions[] = {
100 /* PalmOS "Small ROM", contains the bootloader and the debugger */
101 {
102 .name = "smallrom",
103 .offset = 0,
104 .size = 0xa000,
105 .mask_flags = MTD_WRITEABLE,
106 },
107 /* PalmOS "Big ROM", a filesystem with all the OS code and data */
108 {
109 .name = "bigrom",
110 .offset = SZ_128K,
111 /*
112 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
113 * 0x7b0000 bytes in the English-only ("enUS") version.
114 */
115 .size = 0x7b0000,
116 .mask_flags = MTD_WRITEABLE,
117 },
118};
119
120static struct flash_platform_data palmz71_rom_data = {
121 .map_name = "map_rom",
122 .name = "onboardrom",
123 .width = 2,
124 .parts = palmz71_rom_partitions,
125 .nr_parts = ARRAY_SIZE(palmz71_rom_partitions),
126};
127
128static struct resource palmz71_rom_resource = {
129 .start = OMAP_CS0_PHYS,
130 .end = OMAP_CS0_PHYS + SZ_8M - 1,
131 .flags = IORESOURCE_MEM,
132};
133
134static struct platform_device palmz71_rom_device = {
135 .name = "omapflash",
136 .id = -1,
137 .dev = {
138 .platform_data = &palmz71_rom_data,
139 },
140 .num_resources = 1,
141 .resource = &palmz71_rom_resource,
142};
143
144static struct platform_device palmz71_lcd_device = {
145 .name = "lcd_palmz71",
146 .id = -1,
147};
148
149static struct omap_irda_config palmz71_irda_config = {
150 .transceiver_cap = IR_SIRMODE,
151 .rx_channel = OMAP_DMA_UART3_RX,
152 .tx_channel = OMAP_DMA_UART3_TX,
153 .dest_start = UART3_THR,
154 .src_start = UART3_RHR,
155 .tx_trigger = 0,
156 .rx_trigger = 0,
157};
158
159static struct resource palmz71_irda_resources[] = {
160 [0] = {
161 .start = INT_UART3,
162 .end = INT_UART3,
163 .flags = IORESOURCE_IRQ,
164 },
165};
166
167static struct platform_device palmz71_irda_device = {
168 .name = "omapirda",
169 .id = -1,
170 .dev = {
171 .platform_data = &palmz71_irda_config,
172 },
173 .num_resources = ARRAY_SIZE(palmz71_irda_resources),
174 .resource = palmz71_irda_resources,
175};
176
177static struct platform_device palmz71_spi_device = {
178 .name = "spi_palmz71",
179 .id = -1,
180};
181
182#define DEFAULT_BITPERSAMPLE 16
183
184static struct omap_mcbsp_reg_cfg mcbsp_regs = {
185 .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
186 .spcr1 = RINTM(3) | RRST,
187 .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
188 RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
189 .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
190 .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
191 XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
192 .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
193 .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
194 .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
195 .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
196};
197
198static struct omap_alsa_codec_config alsa_config = {
199 .name = "PalmZ71 AIC23",
200 .mcbsp_regs_alsa = &mcbsp_regs,
201 .codec_configure_dev = NULL, /* aic23_configure */
202 .codec_set_samplerate = NULL, /* aic23_set_samplerate */
203 .codec_clock_setup = NULL, /* aic23_clock_setup */
204 .codec_clock_on = NULL, /* aic23_clock_on */
205 .codec_clock_off = NULL, /* aic23_clock_off */
206 .get_default_samplerate = NULL, /* aic23_get_default_samplerate */
207};
208
209static struct platform_device palmz71_mcbsp1_device = {
210 .name = "omap_alsa_mcbsp",
211 .id = 1,
212 .dev = {
213 .platform_data = &alsa_config,
214 },
215};
216
217static struct omap_backlight_config palmz71_backlight_config = {
218 .default_intensity = 0xa0,
219};
220
221static struct platform_device palmz71_backlight_device = {
222 .name = "omap-bl",
223 .id = -1,
224 .dev = {
225 .platform_data = &palmz71_backlight_config,
226 },
227};
228
229static struct platform_device *devices[] __initdata = {
230 &palmz71_rom_device,
231 &palmz71_kp_device,
232 &palmz71_mcbsp1_device,
233 &palmz71_lcd_device,
234 &palmz71_irda_device,
235 &palmz71_spi_device,
236 &palmz71_backlight_device,
237};
238
239static int
240palmz71_get_pendown_state(void)
241{
242 return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO);
243}
244
245static const struct ads7846_platform_data palmz71_ts_info = {
246 .model = 7846,
247 .vref_delay_usecs = 100, /* internal, no capacitor */
248 .x_plate_ohms = 419,
249 .y_plate_ohms = 486,
250 .get_pendown_state = palmz71_get_pendown_state,
251};
252
253static struct spi_board_info __initdata palmz71_boardinfo[] = { {
254 /* MicroWire (bus 2) CS0 has an ads7846e */
255 .modalias = "ads7846",
256 .platform_data = &palmz71_ts_info,
257 .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
258 .max_speed_hz = 120000 /* max sample rate at 3V */
259 * 26 /* command + data + overhead */,
260 .bus_num = 2,
261 .chip_select = 0,
262} };
263
264static struct omap_usb_config palmz71_usb_config __initdata = {
265 .register_dev = 1, /* Mini-B only receptacle */
266 .hmc_mode = 0,
267 .pins[0] = 2,
268};
269
270static struct omap_mmc_config palmz71_mmc_config __initdata = {
271 .mmc[0] = {
272 .enabled = 1,
273 .wire4 = 0,
274 .wp_pin = PALMZ71_MMC_WP_GPIO,
275 .power_pin = -1,
276 .switch_pin = PALMZ71_MMC_IN_GPIO,
277 },
278};
279
280static struct omap_lcd_config palmz71_lcd_config __initdata = {
281 .ctrl_name = "internal",
282};
283
284static struct omap_uart_config palmz71_uart_config __initdata = {
285 .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
286};
287
Tony Lindgrene27a93a2007-12-18 20:58:32 -0800288static struct omap_board_config_kernel palmz71_config[] __initdata = {
Marek Vasutec70e8a2006-12-06 17:13:57 -0800289 {OMAP_TAG_USB, &palmz71_usb_config},
290 {OMAP_TAG_MMC, &palmz71_mmc_config},
291 {OMAP_TAG_LCD, &palmz71_lcd_config},
292 {OMAP_TAG_UART, &palmz71_uart_config},
293};
294
295static irqreturn_t
296palmz71_powercable(int irq, void *dev_id)
297{
298 if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
299 printk(KERN_INFO "PM: Power cable connected\n");
300 set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
301 IRQT_FALLING);
302 } else {
303 printk(KERN_INFO "PM: Power cable disconnected\n");
304 set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
305 IRQT_RISING);
306 }
307 return IRQ_HANDLED;
308}
309
310static void __init
311omap_mpu_wdt_mode(int mode)
312{
313 if (mode)
314 omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
315 else {
316 omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
317 omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
318 }
319}
320
321static void __init
322palmz71_gpio_setup(int early)
323{
324 if (early) {
325 /* Only set GPIO1 so we have a working serial */
326 omap_set_gpio_dataout(1, 1);
327 omap_set_gpio_direction(1, 0);
328 } else {
329 /* Set MMC/SD host WP pin as input */
330 if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) {
331 printk(KERN_ERR "Could not reserve WP GPIO!\n");
332 return;
333 }
334 omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1);
335
336 /* Monitor the Power-cable-connected signal */
337 if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) {
338 printk(KERN_ERR
339 "Could not reserve cable signal GPIO!\n");
340 return;
341 }
342 omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
343 if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
344 palmz71_powercable, IRQF_SAMPLE_RANDOM,
345 "palmz71-cable", 0))
346 printk(KERN_ERR
347 "IRQ request for power cable failed!\n");
348 palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0);
349 }
350}
351
352static void __init
353omap_palmz71_init(void)
354{
355 palmz71_gpio_setup(1);
356 omap_mpu_wdt_mode(0);
357
358 omap_board_config = palmz71_config;
359 omap_board_config_size = ARRAY_SIZE(palmz71_config);
360
361 platform_add_devices(devices, ARRAY_SIZE(devices));
362
363 spi_register_board_info(palmz71_boardinfo,
364 ARRAY_SIZE(palmz71_boardinfo));
365 omap_serial_init();
Jarkko Nikula1ed16a82007-11-07 06:54:32 +0200366 omap_register_i2c_bus(1, 100, NULL, 0);
Marek Vasutec70e8a2006-12-06 17:13:57 -0800367 palmz71_gpio_setup(0);
368}
369
370static void __init
371omap_palmz71_map_io(void)
372{
373 omap1_map_common_io();
374}
375
376MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
377 .phys_io = 0xfff00000,
378 .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
379 .boot_params = 0x10000100,.map_io = omap_palmz71_map_io,
380 .init_irq = omap_palmz71_init_irq,
381 .init_machine = omap_palmz71_init,
382 .timer = &omap_timer,
383MACHINE_END