blob: f54438828cb91ade3dff0fa3d438ea47390eac8a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
Richard Purdie8f274892007-02-20 12:27:25 +00008source "drivers/video/backlight/Kconfig"
James Simmons2ee12162007-05-08 00:37:15 -07009source "drivers/video/display/Kconfig"
Antonino A. Daplasba707102006-06-26 00:26:37 -070010
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -070011config VGASTATE
12 tristate
13 default n
14
Linus Torvalds1da177e2005-04-16 15:20:36 -070015config FB
16 tristate "Support for frame buffer devices"
17 ---help---
18 The frame buffer device provides an abstraction for the graphics
19 hardware. It represents the frame buffer of some video hardware and
20 allows application software to access the graphics hardware through
21 a well-defined interface, so the software doesn't need to know
22 anything about the low-level (hardware register) stuff.
23
24 Frame buffer devices work identically across the different
25 architectures supported by Linux and make the implementation of
26 application programs easier and more portable; at this point, an X
27 server exists which uses the frame buffer device exclusively.
28 On several non-X86 architectures, the frame buffer device is the
29 only way to use the graphics hardware.
30
31 The device is accessed through special device nodes, usually located
32 in the /dev directory, i.e. /dev/fb*.
33
34 You need an utility program called fbset to make full use of frame
35 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
36 and the Framebuffer-HOWTO at
37 <http://www.tahallah.demon.co.uk/programming/prog.html> for more
38 information.
39
40 Say Y here and to the driver for your graphics board below if you
41 are compiling a kernel for a non-x86 architecture.
42
43 If you are compiling for the x86 architecture, you can say Y if you
44 want to play with it, but it is not essential. Please note that
45 running graphical applications that directly touch the hardware
46 (e.g. an accelerated X server) and that are not frame buffer
47 device-aware may cause unexpected results. If unsure, say N.
48
James Simmonse0e34ef2007-02-10 14:15:43 +000049config FIRMWARE_EDID
50 bool "Enable firmware EDID"
51 depends on FB
52 default n
53 ---help---
54 This enables access to the EDID transferred from the firmware.
55 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
56 transfers do not work for your driver and if you are using
57 nvidiafb, i810fb or savagefb.
58
59 In general, choosing Y for this option is safe. If you
60 experience extremely long delays while booting before you get
61 something on your display, try setting this to N. Matrox cards in
62 combination with certain motherboards and monitors are known to
63 suffer from this problem.
64
Dennis Munsiefc5891c2006-10-03 01:14:42 -070065config FB_DDC
66 tristate
James Simmonse0e34ef2007-02-10 14:15:43 +000067 depends on FB
68 select I2C_ALGOBIT
69 select I2C
Dennis Munsiefc5891c2006-10-03 01:14:42 -070070 default n
71
Linus Torvalds1da177e2005-04-16 15:20:36 -070072config FB_CFB_FILLRECT
73 tristate
74 depends on FB
75 default n
76 ---help---
77 Include the cfb_fillrect function for generic software rectangle
78 filling. This is used by drivers that don't provide their own
79 (accelerated) version.
80
81config FB_CFB_COPYAREA
82 tristate
83 depends on FB
84 default n
85 ---help---
86 Include the cfb_copyarea function for generic software area copying.
87 This is used by drivers that don't provide their own (accelerated)
88 version.
89
90config FB_CFB_IMAGEBLIT
91 tristate
92 depends on FB
93 default n
94 ---help---
95 Include the cfb_imageblit function for generic software image
96 blitting. This is used by drivers that don't provide their own
97 (accelerated) version.
98
Antonino A. Daplas68648ed2007-05-08 00:38:57 -070099config FB_SYS_FILLRECT
100 tristate
101 depends on FB
102 default n
103 ---help---
104 Include the sys_fillrect function for generic software rectangle
105 filling. This is used by drivers that don't provide their own
106 (accelerated) version and the framebuffer is in system RAM.
107
108config FB_SYS_COPYAREA
109 tristate
110 depends on FB
111 default n
112 ---help---
113 Include the sys_copyarea function for generic software area copying.
114 This is used by drivers that don't provide their own (accelerated)
115 version and the framebuffer is in system RAM.
116
117config FB_SYS_IMAGEBLIT
118 tristate
119 depends on FB
120 default n
121 ---help---
122 Include the sys_imageblit function for generic software image
123 blitting. This is used by drivers that don't provide their own
124 (accelerated) version and the framebuffer is in system RAM.
125
Antonino A. Daplas09aaf262007-05-08 00:39:03 -0700126config FB_SYS_FOPS
127 tristate
128 depends on FB
129 default n
130
Jaya Kumar60b59be2007-05-08 00:37:37 -0700131config FB_DEFERRED_IO
132 bool
133 depends on FB
134 default y
135
Ondrej Zajiceka2684222007-02-12 00:54:49 -0800136config FB_SVGALIB
137 tristate
138 depends on FB
139 default n
140 ---help---
141 Common utility functions useful to fbdev drivers of VGA-based
142 cards.
143
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144config FB_MACMODES
145 tristate
146 depends on FB
147 default n
148
Michael Hanselmann5474c122006-06-25 05:47:08 -0700149config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -0700150 bool
151 depends on FB
152 select BACKLIGHT_LCD_SUPPORT
153 select BACKLIGHT_CLASS_DEVICE
154 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -0700155
Linus Torvalds1da177e2005-04-16 15:20:36 -0700156config FB_MODE_HELPERS
157 bool "Enable Video Mode Handling Helpers"
158 depends on FB
159 default n
160 ---help---
161 This enables functions for handling video modes using the
162 Generalized Timing Formula and the EDID parser. A few drivers rely
163 on this feature such as the radeonfb, rivafb, and the i810fb. If
164 your driver does not take advantage of this feature, choosing Y will
165 just increase the kernel size by about 5K.
166
167config FB_TILEBLITTING
168 bool "Enable Tile Blitting Support"
169 depends on FB
170 default n
171 ---help---
172 This enables tile blitting. Tile blitting is a drawing technique
173 where the screen is divided into rectangular sections (tiles), whereas
174 the standard blitting divides the screen into pixels. Because the
175 default drawing element is a tile, drawing functions will be passed
176 parameters in terms of number of tiles instead of number of pixels.
177 For example, to draw a single character, instead of using bitmaps,
178 an index to an array of bitmaps will be used. To clear or move a
179 rectangular section of a screen, the rectangle will be described in
180 terms of number of tiles in the x- and y-axis.
181
182 This is particularly important to one driver, matroxfb. If
183 unsure, say N.
184
Miguel Ojeda10ccaf42007-04-23 14:41:09 -0700185comment "Frame buffer hardware drivers"
James Simmonse0e34ef2007-02-10 14:15:43 +0000186 depends on FB
187
Linus Torvalds1da177e2005-04-16 15:20:36 -0700188config FB_CIRRUS
189 tristate "Cirrus Logic support"
190 depends on FB && (ZORRO || PCI)
191 select FB_CFB_FILLRECT
192 select FB_CFB_COPYAREA
193 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700194 ---help---
195 This enables support for Cirrus Logic GD542x/543x based boards on
196 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
197
198 If you have a PCI-based system, this enables support for these
199 chips: GD-543x, GD-544x, GD-5480.
200
201 Please read the file <file:Documentation/fb/cirrusfb.txt>.
202
203 Say N unless you have such a graphics board or plan to get one
204 before you next recompile the kernel.
205
206config FB_PM2
207 tristate "Permedia2 support"
208 depends on FB && ((AMIGA && BROKEN) || PCI)
209 select FB_CFB_FILLRECT
210 select FB_CFB_COPYAREA
211 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700212 help
213 This is the frame buffer device driver for the Permedia2 AGP frame
214 buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
215 product page at
216 <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
217
218config FB_PM2_FIFO_DISCONNECT
219 bool "enable FIFO disconnect feature"
220 depends on FB_PM2 && PCI
221 help
222 Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
223
224config FB_ARMCLCD
225 tristate "ARM PrimeCell PL110 support"
226 depends on FB && ARM && ARM_AMBA
227 select FB_CFB_FILLRECT
228 select FB_CFB_COPYAREA
229 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700230 help
231 This framebuffer device driver is for the ARM PrimeCell PL110
232 Colour LCD controller. ARM PrimeCells provide the building
233 blocks for System on a Chip devices.
234
235 If you want to compile this as a module (=code which can be
236 inserted into and removed from the running kernel), say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500237 here and read <file:Documentation/kbuild/modules.txt>. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700238 will be called amba-clcd.
239
Marc Singer903e2bb2006-05-16 11:41:30 +0100240choice
241
242 depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
243 prompt "LCD Panel"
244 default FB_ARMCLCD_SHARP_LQ035Q7DB02
245
246config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
247 bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
248 help
249 This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
Matt LaPlantecab00892006-10-03 22:36:44 +0200250 color QVGA, HRTFT panel. The LogicPD device includes
Marc Singer903e2bb2006-05-16 11:41:30 +0100251 an integrated HRTFT controller IC.
252 The native resolution is 240x320.
253
254config FB_ARMCLCD_SHARP_LQ057Q3DC02
255 bool "LogicPD LCD 5.7\" QVGA"
256 help
257 This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
258 color QVGA, TFT panel. The LogicPD device includes an
259 The native resolution is 320x240.
260
261config FB_ARMCLCD_SHARP_LQ64D343
262 bool "LogicPD LCD 6.4\" VGA"
263 help
264 This is an implementation of the Sharp LQ64D343, a 6.4"
265 color VGA, TFT panel. The LogicPD device includes an
266 The native resolution is 640x480.
267
268config FB_ARMCLCD_SHARP_LQ10D368
269 bool "LogicPD LCD 10.4\" VGA"
270 help
271 This is an implementation of the Sharp LQ10D368, a 10.4"
272 color VGA, TFT panel. The LogicPD device includes an
273 The native resolution is 640x480.
274
275
276config FB_ARMCLCD_SHARP_LQ121S1DG41
277 bool "LogicPD LCD 12.1\" SVGA"
278 help
279 This is an implementation of the Sharp LQ121S1DG41, a 12.1"
280 color SVGA, TFT panel. The LogicPD device includes an
281 The native resolution is 800x600.
282
283 This panel requires a clock rate may be an integer fraction
284 of the base LCDCLK frequency. The driver will select the
285 highest frequency available that is lower than the maximum
286 allowed. The panel may flicker if the clock rate is
287 slower than the recommended minimum.
288
289config FB_ARMCLCD_AUO_A070VW01_WIDE
290 bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
291 help
292 This is an implementation of the AU Optronics, a 7.0"
293 WIDE Color. The native resolution is 234x480.
294
295config FB_ARMCLCD_HITACHI
296 bool "Hitachi Wide Screen 800x480"
297 help
298 This is an implementation of the Hitachi 800x480.
299
300endchoice
301
302
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303config FB_ACORN
304 bool "Acorn VIDC support"
305 depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
306 select FB_CFB_FILLRECT
307 select FB_CFB_COPYAREA
308 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309 help
310 This is the frame buffer device driver for the Acorn VIDC graphics
311 hardware found in Acorn RISC PCs and other ARM-based machines. If
312 unsure, say N.
313
314config FB_CLPS711X
315 bool "CLPS711X LCD support"
316 depends on (FB = y) && ARM && ARCH_CLPS711X
317 select FB_CFB_FILLRECT
318 select FB_CFB_COPYAREA
319 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800320 help
321 Say Y to enable the Framebuffer driver for the CLPS7111 and
322 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323
324config FB_SA1100
325 bool "SA-1100 LCD support"
326 depends on (FB = y) && ARM && ARCH_SA1100
327 select FB_CFB_FILLRECT
328 select FB_CFB_COPYAREA
329 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330 help
331 This is a framebuffer device for the SA-1100 LCD Controller.
332 See <http://www.linux-fbdev.org/> for information on framebuffer
333 devices.
334
335 If you plan to use the LCD display with your SA-1100 system, say
336 Y here.
337
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700338config FB_IMX
339 tristate "Motorola i.MX LCD support"
340 depends on FB && ARM && ARCH_IMX
341 select FB_CFB_FILLRECT
342 select FB_CFB_COPYAREA
343 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700344
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345config FB_CYBER2000
346 tristate "CyberPro 2000/2010/5000 support"
347 depends on FB && PCI && (BROKEN || !SPARC64)
348 select FB_CFB_FILLRECT
349 select FB_CFB_COPYAREA
350 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351 help
352 This enables support for the Integraphics CyberPro 20x0 and 5000
353 VGA chips used in the Rebel.com Netwinder and other machines.
354 Say Y if you have a NetWinder or a graphics card containing this
355 device, otherwise say N.
356
357config FB_APOLLO
358 bool
359 depends on (FB = y) && APOLLO
360 default y
361 select FB_CFB_FILLRECT
362 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363
364config FB_Q40
365 bool
366 depends on (FB = y) && Q40
367 default y
368 select FB_CFB_FILLRECT
369 select FB_CFB_COPYAREA
370 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371
372config FB_AMIGA
373 tristate "Amiga native chipset support"
374 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700375 help
376 This is the frame buffer device driver for the builtin graphics
377 chipset found in Amigas.
378
379 To compile this driver as a module, choose M here: the
380 module will be called amifb.
381
382config FB_AMIGA_OCS
383 bool "Amiga OCS chipset support"
384 depends on FB_AMIGA
385 help
386 This enables support for the original Agnus and Denise video chips,
387 found in the Amiga 1000 and most A500's and A2000's. If you intend
388 to run Linux on any of these systems, say Y; otherwise say N.
389
390config FB_AMIGA_ECS
391 bool "Amiga ECS chipset support"
392 depends on FB_AMIGA
393 help
394 This enables support for the Enhanced Chip Set, found in later
395 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
396 you intend to run Linux on any of these systems, say Y; otherwise
397 say N.
398
399config FB_AMIGA_AGA
400 bool "Amiga AGA chipset support"
401 depends on FB_AMIGA
402 help
403 This enables support for the Advanced Graphics Architecture (also
404 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
405 and CD32. If you intend to run Linux on any of these systems, say Y;
406 otherwise say N.
407
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408config FB_FM2
409 bool "Amiga FrameMaster II/Rainbow II support"
410 depends on (FB = y) && ZORRO
411 select FB_CFB_FILLRECT
412 select FB_CFB_COPYAREA
413 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700414 help
415 This is the frame buffer device driver for the Amiga FrameMaster
416 card from BSC (exhibited 1992 but not shipped as a CBM product).
417
Jaya Kumar1154ea72005-06-21 17:17:04 -0700418config FB_ARC
419 tristate "Arc Monochrome LCD board support"
420 depends on FB && X86
Antonino A. Daplas922e6f92007-05-08 00:38:58 -0700421 select FB_SYS_FILLRECT
422 select FB_SYS_COPYAREA
423 select FB_SYS_IMAGEBLIT
Antonino A. Daplasd9a05f12007-05-08 00:39:04 -0700424 select FB_SYS_FOPS
Jaya Kumar1154ea72005-06-21 17:17:04 -0700425 help
426 This enables support for the Arc Monochrome LCD board. The board
427 is based on the KS-108 lcd controller and is typically a matrix
428 of 2*n chips. This driver was tested with a 128x64 panel. This
429 driver supports it for use with x86 SBCs through a 16 bit GPIO
Matt LaPlante09509602006-10-03 22:31:37 +0200430 interface (8 bit data, 8 bit control). If you anticipate using
Jaya Kumar1154ea72005-06-21 17:17:04 -0700431 this driver, say Y or M; otherwise say N. You must specify the
432 GPIO IO address to be used for setting control and data.
433
Linus Torvalds1da177e2005-04-16 15:20:36 -0700434config FB_ATARI
435 bool "Atari native chipset support"
Michael Schmitza1005012007-05-01 22:32:39 +0200436 depends on (FB = y) && ATARI
437 select FB_CFB_FILLRECT
438 select FB_CFB_COPYAREA
439 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 help
441 This is the frame buffer device driver for the builtin graphics
442 chipset found in Ataris.
443
444config FB_OF
445 bool "Open Firmware frame buffer device support"
Stephen Rothwellbed59272007-03-04 17:04:44 +1100446 depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700447 select FB_CFB_FILLRECT
448 select FB_CFB_COPYAREA
449 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700450 select FB_MACMODES
451 help
452 Say Y if you want support with Open Firmware for your graphics
453 board.
454
455config FB_CONTROL
456 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700457 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700458 select FB_CFB_FILLRECT
459 select FB_CFB_COPYAREA
460 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700461 select FB_MACMODES
462 help
463 This driver supports a frame buffer for the graphics adapter in the
464 Power Macintosh 7300 and others.
465
466config FB_PLATINUM
467 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700468 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469 select FB_CFB_FILLRECT
470 select FB_CFB_COPYAREA
471 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700472 select FB_MACMODES
473 help
474 This driver supports a frame buffer for the "platinum" graphics
475 adapter in some Power Macintoshes.
476
477config FB_VALKYRIE
478 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700479 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700480 select FB_CFB_FILLRECT
481 select FB_CFB_COPYAREA
482 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700483 select FB_MACMODES
484 help
485 This driver supports a frame buffer for the "valkyrie" graphics
486 adapter in some Power Macintoshes.
487
488config FB_CT65550
489 bool "Chips 65550 display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700490 depends on (FB = y) && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700491 select FB_CFB_FILLRECT
492 select FB_CFB_COPYAREA
493 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494 help
495 This is the frame buffer device driver for the Chips & Technologies
496 65550 graphics chip in PowerBooks.
497
498config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800499 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700500 depends on (FB = y) && PCI
501 select FB_CFB_FILLRECT
502 select FB_CFB_COPYAREA
503 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700504 help
505 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700506
507config FB_IMSTT
508 bool "IMS Twin Turbo display support"
509 depends on (FB = y) && PCI
510 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700511 select FB_MACMODES if PPC
512 help
513 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
514 many Macintosh and compatible computers.
515
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516config FB_VGA16
517 tristate "VGA 16-color graphics support"
518 depends on FB && (X86 || PPC)
519 select FB_CFB_FILLRECT
520 select FB_CFB_COPYAREA
521 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700522 select VGASTATE
Antonino A. Daplasd60d2d82007-05-08 00:39:12 -0700523 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700524 help
525 This is the frame buffer device driver for VGA 16 color graphic
526 cards. Say Y if you have such a card.
527
528 To compile this driver as a module, choose M here: the
529 module will be called vga16fb.
530
531config FB_STI
532 tristate "HP STI frame buffer device support"
533 depends on FB && PARISC
534 select FB_CFB_FILLRECT
535 select FB_CFB_COPYAREA
536 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 default y
538 ---help---
539 STI refers to the HP "Standard Text Interface" which is a set of
540 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
541 Enabling this option will implement the linux framebuffer device
542 using calls to the STI BIOS routines for initialisation.
543
544 If you enable this option, you will get a planar framebuffer device
545 /dev/fb which will work on the most common HP graphic cards of the
546 NGLE family, including the artist chips (in the 7xx and Bxxx series),
547 HCRX, HCRX24, CRX, CRX24 and VisEG series.
548
549 It is safe to enable this option, so you should probably say "Y".
550
551config FB_MAC
552 bool "Generic Macintosh display support"
553 depends on (FB = y) && MAC
554 select FB_CFB_FILLRECT
555 select FB_CFB_COPYAREA
556 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700557 select FB_MACMODES
558
559# bool ' Apple DAFB display support' CONFIG_FB_DAFB
560config FB_HP300
561 bool
562 depends on (FB = y) && HP300
563 select FB_CFB_FILLRECT
564 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700565 default y
566
567config FB_TGA
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700568 tristate "TGA/SFB+ framebuffer support"
569 depends on FB && (ALPHA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700570 select FB_CFB_FILLRECT
571 select FB_CFB_COPYAREA
572 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800573 select BITREVERSE
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700574 ---help---
575 This is the frame buffer device driver for generic TGA and SFB+
576 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
577 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
578 TURBOchannel cards, also known as PMAGD-A, -B and -C.
579
580 Due to hardware limitations ZLX-E2 and E3 cards are not supported
581 for DECstation 5000/200 systems. Additionally due to firmware
582 limitations these cards may cause troubles with booting DECstation
583 5000/240 and /260 systems, but are fully supported under Linux if
584 you manage to get it going. ;-)
585
586 Say Y if you have one of those.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700587
588config FB_VESA
589 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800590 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591 select FB_CFB_FILLRECT
592 select FB_CFB_COPYAREA
593 select FB_CFB_IMAGEBLIT
James Simmonsc9b2ec42006-12-08 02:40:57 -0800594 select VIDEO_SELECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700595 help
596 This is the frame buffer device driver for generic VESA 2.0
597 compliant graphic cards. The older VESA 1.2 cards are not supported.
598 You will get a boot time penguin logo at no additional cost. Please
599 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
600
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700601config FB_IMAC
602 bool "Intel-based Macintosh Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700603 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700604 select FB_CFB_FILLRECT
605 select FB_CFB_COPYAREA
606 select FB_CFB_IMAGEBLIT
607 help
608 This is the frame buffer device driver for the Intel-based Macintosh
609
Jaya Kumaraad09e52007-05-08 00:37:43 -0700610config FB_HECUBA
611 tristate "Hecuba board support"
612 depends on FB && X86 && MMU
Antonino A. Daplasd6774932007-05-08 00:39:00 -0700613 select FB_SYS_FILLRECT
614 select FB_SYS_COPYAREA
615 select FB_SYS_IMAGEBLIT
Antonino A. Daplas28d45642007-05-08 00:39:06 -0700616 select FB_SYS_FOPS
Jaya Kumaraad09e52007-05-08 00:37:43 -0700617 select FB_DEFERRED_IO
618 help
619 This enables support for the Hecuba board. This driver was tested
620 with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
621 interface (8 bit data, 4 bit control). If you anticpate using
622 this driver, say Y or M; otherwise say N. You must specify the
623 GPIO IO address to be used for setting control and data.
624
Linus Torvalds1da177e2005-04-16 15:20:36 -0700625config FB_HGA
626 tristate "Hercules mono graphics support"
627 depends on FB && X86
628 select FB_CFB_FILLRECT
629 select FB_CFB_COPYAREA
630 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700631 help
632 Say Y here if you have a Hercules mono graphics card.
633
634 To compile this driver as a module, choose M here: the
635 module will be called hgafb.
636
637 As this card technology is 15 years old, most people will answer N
638 here.
639
640config FB_HGA_ACCEL
641 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
642 depends on FB_HGA && EXPERIMENTAL
643 ---help---
644 This will compile the Hercules mono graphics with
645 acceleration functions.
646
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647config FB_SGIVW
648 tristate "SGI Visual Workstation framebuffer support"
649 depends on FB && X86_VISWS
650 select FB_CFB_FILLRECT
651 select FB_CFB_COPYAREA
652 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700653 help
654 SGI Visual Workstation support for framebuffer graphics.
655
656config FB_GBE
657 bool "SGI Graphics Backend frame buffer support"
658 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
659 select FB_CFB_FILLRECT
660 select FB_CFB_COPYAREA
661 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700662 help
663 This is the frame buffer device driver for SGI Graphics Backend.
664 This chip is used in SGI O2 and Visual Workstation 320/540.
665
666config FB_GBE_MEM
667 int "Video memory size in MB"
668 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800669 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700670 help
671 This is the amount of memory reserved for the framebuffer,
672 which can be any value between 1MB and 8MB.
673
Mark Fortescue1a571982005-11-29 19:34:44 -0800674config FB_SBUS
675 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800676 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800677 help
678 Say Y if you want support for SBUS or UPA based frame buffer device.
679
Linus Torvalds1da177e2005-04-16 15:20:36 -0700680config FB_BW2
681 bool "BWtwo support"
Adrian Bunke0196302007-02-12 00:54:50 -0800682 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700683 select FB_CFB_FILLRECT
684 select FB_CFB_COPYAREA
685 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700686 help
687 This is the frame buffer device driver for the BWtwo frame buffer.
688
689config FB_CG3
690 bool "CGthree support"
Adrian Bunke0196302007-02-12 00:54:50 -0800691 depends on (FB = y) && (SPARC && FB_SBUS)
Mark Fortescue1a571982005-11-29 19:34:44 -0800692 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700693 select FB_CFB_COPYAREA
694 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700695 help
696 This is the frame buffer device driver for the CGthree frame buffer.
697
698config FB_CG6
699 bool "CGsix (GX,TurboGX) support"
Adrian Bunke0196302007-02-12 00:54:50 -0800700 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700701 select FB_CFB_COPYAREA
702 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703 help
704 This is the frame buffer device driver for the CGsix (GX, TurboGX)
705 frame buffer.
706
707config FB_PVR2
708 tristate "NEC PowerVR 2 display support"
709 depends on FB && SH_DREAMCAST
710 select FB_CFB_FILLRECT
711 select FB_CFB_COPYAREA
712 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700713 ---help---
714 Say Y here if you have a PowerVR 2 card in your box. If you plan to
715 run linux on your Dreamcast, you will have to say Y here.
716 This driver may or may not work on other PowerVR 2 cards, but is
717 totally untested. Use at your own risk. If unsure, say N.
718
719 To compile this driver as a module, choose M here: the
720 module will be called pvr2fb.
721
722 You can pass several parameters to the driver at boot time or at
723 module load time. The parameters look like "video=pvr2:XXX", where
724 the meaning of XXX can be found at the end of the main source file
725 (<file:drivers/video/pvr2fb.c>). Please see the file
726 <file:Documentation/fb/pvr2fb.txt>.
727
728config FB_EPSON1355
729 bool "Epson 1355 framebuffer support"
730 depends on (FB = y) && (SUPERH || ARCH_CEIVA)
731 select FB_CFB_FILLRECT
732 select FB_CFB_COPYAREA
733 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700734 help
735 Build in support for the SED1355 Epson Research Embedded RAMDAC
736 LCD/CRT Controller (since redesignated as the S1D13505) as a
737 framebuffer. Product specs at
738 <http://www.erd.epson.com/vdc/html/products.htm>.
739
Randy Dunlapecc41d52005-11-07 01:00:29 -0800740config FB_S1D13XXX
741 tristate "Epson S1D13XXX framebuffer support"
742 depends on FB
743 select FB_CFB_FILLRECT
744 select FB_CFB_COPYAREA
745 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800746 help
747 Support for S1D13XXX framebuffer device family (currently only
748 working with S1D13806). Product specs at
749 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
750
Linus Torvalds1da177e2005-04-16 15:20:36 -0700751config FB_NVIDIA
752 tristate "nVidia Framebuffer Support"
753 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +0000754 select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755 select FB_MODE_HELPERS
756 select FB_CFB_FILLRECT
757 select FB_CFB_COPYAREA
758 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800759 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700760 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700761 help
762 This driver supports graphics boards with the nVidia chips, TNT
763 and newer. For very old chipsets, such as the RIVA128, then use
764 the rivafb.
765 Say Y if you have such a graphics board.
766
767 To compile this driver as a module, choose M here: the
768 module will be called nvidiafb.
769
770config FB_NVIDIA_I2C
771 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -0800772 depends on FB_NVIDIA
James Simmons166f60d2007-03-06 01:42:02 -0800773 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700774 help
775 This enables I2C support for nVidia Chipsets. This is used
776 only for getting EDID information from the attached display
777 allowing for robust video mode handling and switching.
778
779 Because fbdev-2.6 requires that drivers must be able to
780 independently validate video mode parameters, you should say Y
781 here.
782
Michael Hanselmann5474c122006-06-25 05:47:08 -0700783config FB_NVIDIA_BACKLIGHT
784 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +0000785 depends on FB_NVIDIA
Michael Hanselmann5474c122006-06-25 05:47:08 -0700786 default y
787 help
788 Say Y here if you want to control the backlight of your display.
789
Linus Torvalds1da177e2005-04-16 15:20:36 -0700790config FB_RIVA
791 tristate "nVidia Riva support"
792 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +0000793 select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794 select FB_MODE_HELPERS
795 select FB_CFB_FILLRECT
796 select FB_CFB_COPYAREA
797 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800798 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700799 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700800 help
801 This driver supports graphics boards with the nVidia Riva/Geforce
802 chips.
803 Say Y if you have such a graphics board.
804
805 To compile this driver as a module, choose M here: the
806 module will be called rivafb.
807
808config FB_RIVA_I2C
809 bool "Enable DDC Support"
810 depends on FB_RIVA
James Simmons166f60d2007-03-06 01:42:02 -0800811 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700812 help
813 This enables I2C support for nVidia Chipsets. This is used
814 only for getting EDID information from the attached display
815 allowing for robust video mode handling and switching.
816
817 Because fbdev-2.6 requires that drivers must be able to
818 independently validate video mode parameters, you should say Y
819 here.
820
821config FB_RIVA_DEBUG
822 bool "Lots of debug output from Riva(nVidia) driver"
823 depends on FB_RIVA
824 default n
825 help
826 Say Y here if you want the Riva driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +0200827 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -0700828 something goes wrong.
829
Michael Hanselmann5474c122006-06-25 05:47:08 -0700830config FB_RIVA_BACKLIGHT
831 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +0000832 depends on FB_RIVA
Michael Hanselmann5474c122006-06-25 05:47:08 -0700833 default y
834 help
835 Say Y here if you want to control the backlight of your display.
836
Linus Torvalds1da177e2005-04-16 15:20:36 -0700837config FB_I810
838 tristate "Intel 810/815 support (EXPERIMENTAL)"
Brian Gerst0d078f62005-10-30 14:59:20 -0800839 depends on FB && EXPERIMENTAL && PCI && X86_32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700840 select AGP
841 select AGP_INTEL
842 select FB_MODE_HELPERS
843 select FB_CFB_FILLRECT
844 select FB_CFB_COPYAREA
845 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700846 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700847 help
848 This driver supports the on-board graphics built in to the Intel 810
849 and 815 chipsets. Say Y if you have and plan to use such a board.
850
851 To compile this driver as a module, choose M here: the
852 module will be called i810fb.
853
854 For more information, please read
855 <file:Documentation/fb/intel810.txt>
856
857config FB_I810_GTF
858 bool "use VESA Generalized Timing Formula"
859 depends on FB_I810
860 help
861 If you say Y, then the VESA standard, Generalized Timing Formula
862 or GTF, will be used to calculate the required video timing values
863 per video mode. Since the GTF allows nondiscrete timings
864 (nondiscrete being a range of values as opposed to discrete being a
865 set of values), you'll be able to use any combination of horizontal
866 and vertical resolutions, and vertical refresh rates without having
867 to specify your own timing parameters. This is especially useful
868 to maximize the performance of an aging display, or if you just
869 have a display with nonstandard dimensions. A VESA compliant
870 monitor is recommended, but can still work with non-compliant ones.
871 If you need or want this, then select this option. The timings may
872 not be compliant with Intel's recommended values. Use at your own
873 risk.
874
875 If you say N, the driver will revert to discrete video timings
876 using a set recommended by Intel in their documentation.
877
878 If unsure, say N.
879
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -0700880config FB_I810_I2C
881 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -0700882 depends on FB_I810 && FB_I810_GTF
Antonino A. Daplase80987f2006-10-03 01:14:44 -0700883 select FB_DDC
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -0700884 help
885
Alan Hourihanedbe7e422007-05-08 00:39:25 -0700886config FB_LE80578
887 tristate "Intel LE80578 (Vermilion) support"
888 depends on FB && PCI && X86
889 select FB_MODE_HELPERS
890 select FB_CFB_FILLRECT
891 select FB_CFB_COPYAREA
892 select FB_CFB_IMAGEBLIT
893 help
894 This driver supports the LE80578 (Vermilion Range) chipset
895
896config FB_CARILLO_RANCH
897 tristate "Intel Carillo Ranch support"
898 depends on FB_LE80578 && FB && PCI && X86
899 help
900 This driver supports the LE80578 (Carillo Ranch) board
901
Linus Torvalds1da177e2005-04-16 15:20:36 -0700902config FB_INTEL
Christian Merkled463d342006-08-22 10:07:01 +1000903 tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
Dave Airlie0c187ad2006-03-23 11:20:08 +1100904 depends on FB && EXPERIMENTAL && PCI && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700905 select AGP
906 select AGP_INTEL
907 select FB_MODE_HELPERS
908 select FB_CFB_FILLRECT
909 select FB_CFB_COPYAREA
910 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700911 help
912 This driver supports the on-board graphics built in to the Intel
Christian Merkled463d342006-08-22 10:07:01 +1000913 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700914 Say Y if you have and plan to use such a board.
915
Dennis Munsie1f6e8442006-06-20 14:55:55 -0400916 If you say Y here and want DDC/I2C support you must first say Y to
917 "I2C support" and "I2C bit-banging support" in the character devices
918 section.
919
920 If you say M here then "I2C support" and "I2C bit-banging support"
921 can be build either as modules or built-in.
922
923 To compile this driver as a module, choose M here: the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700924 module will be called intelfb.
925
Christian Merkled463d342006-08-22 10:07:01 +1000926 For more information, please read <file:Documentation/fb/intelfb.txt>
927
Linus Torvalds1da177e2005-04-16 15:20:36 -0700928config FB_INTEL_DEBUG
Dennis Munsie1f6e8442006-06-20 14:55:55 -0400929 bool "Intel driver Debug Messages"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700930 depends on FB_INTEL
931 ---help---
932 Say Y here if you want the Intel driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +0200933 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -0700934 something goes wrong.
935
Dennis Munsie1f6e8442006-06-20 14:55:55 -0400936config FB_INTEL_I2C
937 bool "DDC/I2C for Intel framebuffer support"
938 depends on FB_INTEL
James Simmons166f60d2007-03-06 01:42:02 -0800939 select FB_DDC
Dennis Munsie1f6e8442006-06-20 14:55:55 -0400940 default y
941 help
942 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
943
Linus Torvalds1da177e2005-04-16 15:20:36 -0700944config FB_MATROX
945 tristate "Matrox acceleration"
946 depends on FB && PCI
947 select FB_CFB_FILLRECT
948 select FB_CFB_COPYAREA
949 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700950 select FB_TILEBLITTING
951 select FB_MACMODES if PPC_PMAC
952 ---help---
953 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
954 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
955 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
956 Matrox G400, G450 or G550 card in your box.
957
958 To compile this driver as a module, choose M here: the
959 module will be called matroxfb.
960
961 You can pass several parameters to the driver at boot time or at
962 module load time. The parameters look like "video=matrox:XXX", and
963 are described in <file:Documentation/fb/matroxfb.txt>.
964
965config FB_MATROX_MILLENIUM
966 bool "Millennium I/II support"
967 depends on FB_MATROX
968 help
969 Say Y here if you have a Matrox Millennium or Matrox Millennium II
970 video card. If you select "Advanced lowlevel driver options" below,
971 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
972 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
973 also use font widths different from 8.
974
975config FB_MATROX_MYSTIQUE
976 bool "Mystique support"
977 depends on FB_MATROX
978 help
979 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
980 video card. If you select "Advanced lowlevel driver options" below,
981 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
982 packed pixel and 32 bpp packed pixel. You can also use font widths
983 different from 8.
984
985config FB_MATROX_G
986 bool "G100/G200/G400/G450/G550 support"
987 depends on FB_MATROX
988 ---help---
989 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
990 video card. If you select "Advanced lowlevel driver options", you
991 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
992 pixel and 32 bpp packed pixel. You can also use font widths
993 different from 8.
994
995 If you need support for G400 secondary head, you must first say Y to
996 "I2C support" in the character devices section, and then to
997 "Matrox I2C support" and "G400 second head support" here in the
998 framebuffer section. G450/G550 secondary head and digital output
999 are supported without additional modules.
1000
1001 The driver starts in monitor mode. You must use the matroxset tool
1002 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1003 swap primary and secondary head outputs, or to change output mode.
1004 Secondary head driver always start in 640x480 resolution and you
1005 must use fbset to change it.
1006
1007 Do not forget that second head supports only 16 and 32 bpp
1008 packed pixels, so it is a good idea to compile them into the kernel
1009 too. You can use only some font widths, as the driver uses generic
1010 painting procedures (the secondary head does not use acceleration
1011 engine).
1012
1013 G450/G550 hardware can display TV picture only from secondary CRTC,
1014 and it performs no scaling, so picture must have 525 or 625 lines.
1015
1016config FB_MATROX_I2C
1017 tristate "Matrox I2C support"
James Simmons166f60d2007-03-06 01:42:02 -08001018 depends on FB_MATROX
1019 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001020 ---help---
1021 This drivers creates I2C buses which are needed for accessing the
1022 DDC (I2C) bus present on all Matroxes, an I2C bus which
1023 interconnects Matrox optional devices, like MGA-TVO on G200 and
1024 G400, and the secondary head DDC bus, present on G400 only.
1025
1026 You can say Y or M here if you want to experiment with monitor
1027 detection code. You must say Y or M here if you want to use either
1028 second head of G400 or MGA-TVO on G200 or G400.
1029
1030 If you compile it as module, it will create a module named
1031 i2c-matroxfb.
1032
1033config FB_MATROX_MAVEN
1034 tristate "G400 second head support"
1035 depends on FB_MATROX_G && FB_MATROX_I2C
1036 ---help---
1037 WARNING !!! This support does not work with G450 !!!
1038
1039 Say Y or M here if you want to use a secondary head (meaning two
1040 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1041 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1042 secondary head output is blanked while you are in X. With XFree
1043 3.9.17 preview you can use both heads if you use SVGA over fbdev or
1044 the fbdev driver on first head and the fbdev driver on second head.
1045
1046 If you compile it as module, two modules are created,
1047 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1048 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1049 also load i2c-matroxfb to get it to run.
1050
1051 The driver starts in monitor mode and you must use the matroxset
1052 tool (available at
1053 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1054 PAL or NTSC or to swap primary and secondary head outputs.
1055 Secondary head driver also always start in 640x480 resolution, you
1056 must use fbset to change it.
1057
1058 Also do not forget that second head supports only 16 and 32 bpp
1059 packed pixels, so it is a good idea to compile them into the kernel
1060 too. You can use only some font widths, as the driver uses generic
1061 painting procedures (the secondary head does not use acceleration
1062 engine).
1063
1064config FB_MATROX_MULTIHEAD
1065 bool "Multihead support"
1066 depends on FB_MATROX
1067 ---help---
1068 Say Y here if you have more than one (supported) Matrox device in
1069 your computer and you want to use all of them for different monitors
1070 ("multihead"). If you have only one device, you should say N because
1071 the driver compiled with Y is larger and a bit slower, especially on
1072 ia32 (ix86).
1073
1074 If you said M to "Matrox unified accelerated driver" and N here, you
1075 will still be able to use several Matrox devices simultaneously:
1076 insert several instances of the module matroxfb into the kernel
1077 with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
1078 for the different Matrox devices. This method is slightly faster but
1079 uses 40 KB of kernel memory per Matrox card.
1080
1081 There is no need for enabling 'Matrox multihead support' if you have
1082 only one Matrox card in the box.
1083
Linus Torvalds1da177e2005-04-16 15:20:36 -07001084config FB_RADEON
1085 tristate "ATI Radeon display support"
1086 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001087 select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001088 select FB_MODE_HELPERS
1089 select FB_CFB_FILLRECT
1090 select FB_CFB_COPYAREA
1091 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001092 select FB_MACMODES if PPC_OF
1093 help
1094 Choose this option if you want to use an ATI Radeon graphics card as
1095 a framebuffer device. There are both PCI and AGP versions. You
1096 don't need to choose this to run the Radeon in plain VGA mode.
1097
1098 If you say Y here and want DDC/I2C support you must first say Y to
1099 "I2C support" and "I2C bit-banging support" in the character devices
1100 section.
1101
1102 If you say M here then "I2C support" and "I2C bit-banging support"
1103 can be build either as modules or built-in.
1104
1105 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -07001106 http://apps.ati.com/ATIcompare/
Michael Hanselmann5474c122006-06-25 05:47:08 -07001107
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108config FB_RADEON_I2C
1109 bool "DDC/I2C for ATI Radeon support"
1110 depends on FB_RADEON
James Simmons166f60d2007-03-06 01:42:02 -08001111 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001112 default y
1113 help
1114 Say Y here if you want DDC/I2C support for your Radeon board.
1115
Michael Hanselmann5474c122006-06-25 05:47:08 -07001116config FB_RADEON_BACKLIGHT
1117 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001118 depends on FB_RADEON
Michael Hanselmann5474c122006-06-25 05:47:08 -07001119 default y
1120 help
1121 Say Y here if you want to control the backlight of your display.
1122
Linus Torvalds1da177e2005-04-16 15:20:36 -07001123config FB_RADEON_DEBUG
1124 bool "Lots of debug output from Radeon driver"
1125 depends on FB_RADEON
1126 default n
1127 help
1128 Say Y here if you want the Radeon driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001129 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001130 something goes wrong.
1131
1132config FB_ATY128
1133 tristate "ATI Rage128 display support"
1134 depends on FB && PCI
1135 select FB_CFB_FILLRECT
1136 select FB_CFB_COPYAREA
1137 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001138 select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139 select FB_MACMODES if PPC_PMAC
1140 help
1141 This driver supports graphics boards with the ATI Rage128 chips.
1142 Say Y if you have such a graphics board and read
1143 <file:Documentation/fb/aty128fb.txt>.
1144
1145 To compile this driver as a module, choose M here: the
1146 module will be called aty128fb.
1147
Michael Hanselmann5474c122006-06-25 05:47:08 -07001148config FB_ATY128_BACKLIGHT
1149 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001150 depends on FB_ATY128
Michael Hanselmann5474c122006-06-25 05:47:08 -07001151 default y
1152 help
1153 Say Y here if you want to control the backlight of your display.
1154
Linus Torvalds1da177e2005-04-16 15:20:36 -07001155config FB_ATY
1156 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001157 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001158 select FB_CFB_FILLRECT
1159 select FB_CFB_COPYAREA
1160 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001161 select FB_BACKLIGHT if FB_ATY_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001162 select FB_MACMODES if PPC
1163 help
1164 This driver supports graphics boards with the ATI Mach64 chips.
1165 Say Y if you have such a graphics board.
1166
1167 To compile this driver as a module, choose M here: the
1168 module will be called atyfb.
1169
1170config FB_ATY_CT
1171 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1172 depends on PCI && FB_ATY
1173 default y if SPARC64 && FB_PCI
1174 help
1175 Say Y here to support use of ATI's 64-bit Rage boards (or other
1176 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1177 framebuffer device. The ATI product support page for these boards
1178 is at <http://support.ati.com/products/pc/mach64/>.
1179
1180config FB_ATY_GENERIC_LCD
1181 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1182 depends on FB_ATY_CT
1183 help
1184 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1185 Rage XC, or Rage XL chipset.
1186
Linus Torvalds1da177e2005-04-16 15:20:36 -07001187config FB_ATY_GX
1188 bool "Mach64 GX support" if PCI
1189 depends on FB_ATY
1190 default y if ATARI
1191 help
1192 Say Y here to support use of the ATI Mach64 Graphics Expression
1193 board (or other boards based on the Mach64 GX chipset) as a
1194 framebuffer device. The ATI product support page for these boards
1195 is at
1196 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1197
Michael Hanselmann5474c122006-06-25 05:47:08 -07001198config FB_ATY_BACKLIGHT
1199 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001200 depends on FB_ATY
Michael Hanselmann5474c122006-06-25 05:47:08 -07001201 default y
1202 help
1203 Say Y here if you want to control the backlight of your display.
1204
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001205config FB_S3
1206 tristate "S3 Trio/Virge support"
1207 depends on FB && PCI
1208 select FB_CFB_FILLRECT
1209 select FB_CFB_COPYAREA
1210 select FB_CFB_IMAGEBLIT
1211 select FB_TILEBLITTING
1212 select FB_SVGALIB
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001213 select VGASTATE
Antonino A. Daplas8db51662007-05-08 00:39:14 -07001214 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001215 ---help---
1216 Driver for graphics boards with S3 Trio / S3 Virge chip.
1217
Linus Torvalds1da177e2005-04-16 15:20:36 -07001218config FB_SAVAGE
1219 tristate "S3 Savage support"
1220 depends on FB && PCI && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001221 select FB_MODE_HELPERS
1222 select FB_CFB_FILLRECT
1223 select FB_CFB_COPYAREA
1224 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001225 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001226 help
1227 This driver supports notebooks and computers with S3 Savage PCI/AGP
1228 chips.
1229
1230 Say Y if you have such a graphics card.
1231
1232 To compile this driver as a module, choose M here; the module
1233 will be called savagefb.
1234
1235config FB_SAVAGE_I2C
1236 bool "Enable DDC2 Support"
1237 depends on FB_SAVAGE
James Simmons166f60d2007-03-06 01:42:02 -08001238 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001239 help
1240 This enables I2C support for S3 Savage Chipsets. This is used
1241 only for getting EDID information from the attached display
1242 allowing for robust video mode handling and switching.
1243
1244 Because fbdev-2.6 requires that drivers must be able to
1245 independently validate video mode parameters, you should say Y
1246 here.
1247
1248config FB_SAVAGE_ACCEL
1249 bool "Enable Console Acceleration"
1250 depends on FB_SAVAGE
1251 default n
1252 help
1253 This option will compile in console acceleration support. If
1254 the resulting framebuffer console has bothersome glitches, then
1255 choose N here.
1256
1257config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001258 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001259 depends on FB && PCI
1260 select FB_CFB_FILLRECT
1261 select FB_CFB_COPYAREA
1262 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001263 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001264 This is the frame buffer device driver for the SiS 300, 315, 330
1265 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1266 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001267
1268 To compile this driver as a module, choose M here; the module
1269 will be called sisfb.
1270
1271config FB_SIS_300
1272 bool "SiS 300 series support"
1273 depends on FB_SIS
1274 help
1275 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1276
1277config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001278 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001279 depends on FB_SIS
1280 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001281 Say Y here to support use of the SiS 315, 330 and 340 series
1282 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1283 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001284
1285config FB_NEOMAGIC
1286 tristate "NeoMagic display support"
1287 depends on FB && PCI
1288 select FB_MODE_HELPERS
1289 select FB_CFB_FILLRECT
1290 select FB_CFB_COPYAREA
1291 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001292 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001293 help
1294 This driver supports notebooks with NeoMagic PCI chips.
1295 Say Y if you have such a graphics card.
1296
1297 To compile this driver as a module, choose M here: the
1298 module will be called neofb.
1299
1300config FB_KYRO
1301 tristate "IMG Kyro support"
1302 depends on FB && PCI
1303 select FB_CFB_FILLRECT
1304 select FB_CFB_COPYAREA
1305 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001306 help
1307 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1308 graphics board.
1309
1310 To compile this driver as a module, choose M here: the
1311 module will be called kyrofb.
1312
1313config FB_3DFX
1314 tristate "3Dfx Banshee/Voodoo3 display support"
1315 depends on FB && PCI
1316 select FB_CFB_IMAGEBLIT
1317 select FB_CFB_FILLRECT
1318 select FB_CFB_COPYAREA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001319 help
1320 This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
1321 chips. Say Y if you have such a graphics board.
1322
1323 To compile this driver as a module, choose M here: the
1324 module will be called tdfxfb.
1325
1326config FB_3DFX_ACCEL
1327 bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
1328 depends on FB_3DFX && EXPERIMENTAL
1329 ---help---
1330 This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
1331 with acceleration functions.
1332
1333
1334config FB_VOODOO1
1335 tristate "3Dfx Voodoo Graphics (sst1) support"
1336 depends on FB && PCI
1337 select FB_CFB_FILLRECT
1338 select FB_CFB_COPYAREA
1339 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001340 ---help---
1341 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1342 Voodoo2 (cvg) based graphics card.
1343
1344 To compile this driver as a module, choose M here: the
1345 module will be called sstfb.
1346
1347 WARNING: Do not use any application that uses the 3D engine
1348 (namely glide) while using this driver.
1349 Please read the <file:Documentation/fb/README-sstfb.txt> for supported
1350 options and other important info support.
1351
Ondrej Zajicek558b7bd2007-05-09 02:35:31 -07001352config FB_VT8623
1353 tristate "VIA VT8623 support"
1354 depends on FB && PCI
1355 select FB_CFB_FILLRECT
1356 select FB_CFB_COPYAREA
1357 select FB_CFB_IMAGEBLIT
1358 select FB_TILEBLITTING
1359 select FB_SVGALIB
1360 select VGASTATE
1361 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1362 ---help---
1363 Driver for CastleRock integrated graphics core in the
1364 VIA VT8623 [Apollo CLE266] chipset.
1365
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001366config FB_CYBLA
1367 tristate "Cyberblade/i1 support"
Knut Petersen44637a12006-01-09 15:04:20 +01001368 depends on FB && PCI && X86_32 && !64BIT
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001369 select FB_CFB_IMAGEBLIT
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001370 select VIDEO_SELECT
1371 ---help---
1372 This driver is supposed to support the Trident Cyberblade/i1
1373 graphics core integrated in the VIA VT8601A North Bridge,
1374 also known as VIA Apollo PLE133.
1375
1376 Status:
1377 - Developed, tested and working on EPIA 5000 and EPIA 800.
1378 - Does work reliable on all systems with CRT/LCD connected to
1379 normal VGA ports.
1380 - Should work on systems that do use the internal LCD port, but
1381 this is absolutely not tested.
1382
1383 Character imageblit, copyarea and rectangle fill are hw accelerated,
1384 ypan scrolling is used by default.
1385
1386 Please do read <file:Documentation/fb/cyblafb/*>.
1387
1388 To compile this driver as a module, choose M here: the
1389 module will be called cyblafb.
1390
Linus Torvalds1da177e2005-04-16 15:20:36 -07001391config FB_TRIDENT
1392 tristate "Trident support"
1393 depends on FB && PCI
1394 select FB_CFB_FILLRECT
1395 select FB_CFB_COPYAREA
1396 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001397 ---help---
1398 This driver is supposed to support graphics boards with the
1399 Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
1400 but also on some motherboards. For more information, read
1401 <file:Documentation/fb/tridentfb.txt>
1402
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001403 Cyberblade/i1 support will be removed soon, use the cyblafb driver
1404 instead.
1405
Linus Torvalds1da177e2005-04-16 15:20:36 -07001406 Say Y if you have such a graphics board.
1407
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001408
Linus Torvalds1da177e2005-04-16 15:20:36 -07001409 To compile this driver as a module, choose M here: the
1410 module will be called tridentfb.
1411
1412config FB_TRIDENT_ACCEL
1413 bool "Trident Acceleration functions (EXPERIMENTAL)"
1414 depends on FB_TRIDENT && EXPERIMENTAL
1415 ---help---
1416 This will compile the Trident frame buffer device with
1417 acceleration functions.
1418
Ondrej Zajicek681e1472007-05-09 02:35:31 -07001419config FB_ARK
1420 tristate "ARK 2000PV support"
1421 depends on FB && PCI
1422 select FB_CFB_FILLRECT
1423 select FB_CFB_COPYAREA
1424 select FB_CFB_IMAGEBLIT
1425 select FB_TILEBLITTING
1426 select FB_SVGALIB
1427 select VGASTATE
1428 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1429 ---help---
1430 Driver for PCI graphics boards with ARK 2000PV chip
1431 and ICS 5342 RAMDAC.
1432
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433config FB_PM3
1434 tristate "Permedia3 support"
1435 depends on FB && PCI && BROKEN
1436 help
1437 This is the frame buffer device driver for the 3DLabs Permedia3
1438 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1439 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1440 and maybe other boards.
1441
Linus Torvalds1da177e2005-04-16 15:20:36 -07001442config FB_AU1100
1443 bool "Au1100 LCD Driver"
1444 depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
1445
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001446config FB_AU1200
1447 bool "Au1200 LCD Driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001448 depends on (FB = y) && MIPS && SOC_AU1200
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001449 select FB_CFB_FILLRECT
1450 select FB_CFB_COPYAREA
1451 select FB_CFB_IMAGEBLIT
1452 help
1453 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1454 various panels and CRTs by passing in kernel cmd line option
1455 au1200fb:panel=<name>.
1456
Linus Torvalds1da177e2005-04-16 15:20:36 -07001457source "drivers/video/geode/Kconfig"
1458
Linus Torvalds1da177e2005-04-16 15:20:36 -07001459config FB_FFB
1460 bool "Creator/Creator3D/Elite3D support"
1461 depends on FB_SBUS && SPARC64
1462 select FB_CFB_COPYAREA
1463 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001464 help
1465 This is the frame buffer device driver for the Creator, Creator3D,
1466 and Elite3D graphics boards.
1467
1468config FB_TCX
1469 bool "TCX (SS4/SS5 only) support"
1470 depends on FB_SBUS
1471 select FB_CFB_FILLRECT
1472 select FB_CFB_COPYAREA
1473 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001474 help
1475 This is the frame buffer device driver for the TCX 24/8bit frame
1476 buffer.
1477
1478config FB_CG14
1479 bool "CGfourteen (SX) support"
1480 depends on FB_SBUS
1481 select FB_CFB_FILLRECT
1482 select FB_CFB_COPYAREA
1483 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001484 help
1485 This is the frame buffer device driver for the CGfourteen frame
1486 buffer on Desktop SPARCsystems with the SX graphics option.
1487
1488config FB_P9100
1489 bool "P9100 (Sparcbook 3 only) support"
1490 depends on FB_SBUS
1491 select FB_CFB_FILLRECT
1492 select FB_CFB_COPYAREA
1493 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001494 help
1495 This is the frame buffer device driver for the P9100 card
1496 supported on Sparcbook 3 machines.
1497
1498config FB_LEO
1499 bool "Leo (ZX) support"
1500 depends on FB_SBUS
1501 select FB_CFB_FILLRECT
1502 select FB_CFB_COPYAREA
1503 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001504 help
1505 This is the frame buffer device driver for the SBUS-based Sun ZX
1506 (leo) frame buffer cards.
1507
David S. Miller453e93b2007-05-06 22:45:08 -07001508config FB_XVR500
1509 bool "Sun XVR-500 3DLABS Wildcat support"
1510 depends on FB && PCI && SPARC64
1511 select FB_CFB_FILLRECT
1512 select FB_CFB_COPYAREA
1513 select FB_CFB_IMAGEBLIT
1514 help
1515 This is the framebuffer device for the Sun XVR-500 and similar
1516 graphics cards based upon the 3DLABS Wildcat chipset. The driver
1517 only works on sparc64 systems where the system firwmare has
1518 mostly initialized the card already. It is treated as a
1519 completely dumb framebuffer device.
1520
David S. Miller71227522007-05-06 22:45:50 -07001521config FB_XVR2500
1522 bool "Sun XVR-2500 3DLABS Wildcat support"
1523 depends on FB && PCI && SPARC64
1524 select FB_CFB_FILLRECT
1525 select FB_CFB_COPYAREA
1526 select FB_CFB_IMAGEBLIT
1527 help
1528 This is the framebuffer device for the Sun XVR-2500 and similar
1529 graphics cards based upon the 3DLABS Wildcat chipset. The driver
1530 only works on sparc64 systems where the system firwmare has
1531 mostly initialized the card already. It is treated as a
1532 completely dumb framebuffer device.
1533
Linus Torvalds1da177e2005-04-16 15:20:36 -07001534config FB_PCI
1535 bool "PCI framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -08001536 depends on (FB = y) && PCI && SPARC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001537
1538config FB_IGA
1539 bool "IGA 168x display support"
1540 depends on SPARC32 && FB_PCI
1541 select FB_CFB_FILLRECT
1542 select FB_CFB_COPYAREA
1543 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001544 help
1545 This is the framebuffer device for the INTERGRAPHICS 1680 and
1546 successor frame buffer cards.
1547
1548config FB_HIT
1549 tristate "HD64461 Frame Buffer support"
1550 depends on FB && HD64461
1551 select FB_CFB_FILLRECT
1552 select FB_CFB_COPYAREA
1553 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001554 help
1555 This is the frame buffer device driver for the Hitachi HD64461 LCD
1556 frame buffer card.
1557
1558config FB_PMAG_AA
1559 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001560 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001561 select FB_CFB_FILLRECT
1562 select FB_CFB_COPYAREA
1563 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001564 help
1565 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1566 used mainly in the MIPS-based DECstation series.
1567
1568config FB_PMAG_BA
Maciej W. Rozycki335dc502007-02-05 16:28:28 -08001569 tristate "PMAG-BA TURBOchannel framebuffer support"
1570 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001571 select FB_CFB_FILLRECT
1572 select FB_CFB_COPYAREA
1573 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001574 help
1575 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1576 used mainly in the MIPS-based DECstation series.
1577
1578config FB_PMAGB_B
Maciej W. Rozycki9084b002007-02-05 16:28:29 -08001579 tristate "PMAGB-B TURBOchannel framebuffer support"
1580 depends on TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001581 select FB_CFB_FILLRECT
1582 select FB_CFB_COPYAREA
1583 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001584 help
1585 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1586 in the MIPS-based DECstation series. The card is currently only
1587 supported in 1280x1024x8 mode.
1588
1589config FB_MAXINE
1590 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001591 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001592 select FB_CFB_FILLRECT
1593 select FB_CFB_COPYAREA
1594 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001595 help
1596 Support for the onboard framebuffer (1024x768x8) in the Personal
1597 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1598 Codename "Maxine").
1599
1600config FB_TX3912
1601 bool "TMPTX3912/PR31700 frame buffer support"
1602 depends on (FB = y) && NINO
1603 select FB_CFB_FILLRECT
1604 select FB_CFB_COPYAREA
1605 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001606 help
1607 The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
1608 see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
1609
1610 Say Y here to enable kernel support for the on-board framebuffer.
1611
1612config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001613 bool "G364 frame buffer support"
1614 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001615 select FB_CFB_FILLRECT
1616 select FB_CFB_COPYAREA
1617 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001618 help
1619 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1620 Olivetti M700-10 systems.
1621
1622config FB_68328
1623 bool "Motorola 68328 native frame buffer support"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001624 depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001625 select FB_CFB_FILLRECT
1626 select FB_CFB_COPYAREA
1627 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001628 help
1629 Say Y here if you want to support the built-in frame buffer of
1630 the Motorola 68328 CPU family.
1631
1632config FB_PXA
1633 tristate "PXA LCD framebuffer support"
1634 depends on FB && ARCH_PXA
1635 select FB_CFB_FILLRECT
1636 select FB_CFB_COPYAREA
1637 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001638 ---help---
1639 Frame buffer driver for the built-in LCD controller in the Intel
1640 PXA2x0 processor.
1641
1642 This driver is also available as a module ( = code which can be
1643 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001644 module will be called pxafb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001645 say M here and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001646
1647 If unsure, say N.
1648
Linus Torvalds1da177e2005-04-16 15:20:36 -07001649config FB_PXA_PARAMETERS
1650 bool "PXA LCD command line parameters"
1651 default n
1652 depends on FB_PXA
1653 ---help---
1654 Enable the use of kernel command line or module parameters
1655 to configure the physical properties of the LCD panel when
1656 using the PXA LCD driver.
1657
1658 This option allows you to override the panel parameters
1659 supplied by the platform in order to support multiple
1660 different models of flatpanel. If you will only be using a
1661 single model of flatpanel then you can safely leave this
1662 option disabled.
1663
1664 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1665
Mike Rapoport22caf042006-07-14 00:24:34 -07001666config FB_MBX
1667 tristate "2700G LCD framebuffer support"
1668 depends on FB && ARCH_PXA
1669 select FB_CFB_FILLRECT
1670 select FB_CFB_COPYAREA
1671 select FB_CFB_IMAGEBLIT
1672 ---help---
1673 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1674 Accelerator
1675
1676config FB_MBX_DEBUG
1677 bool "Enable debugging info via debugfs"
1678 depends on FB_MBX && DEBUG_FS
1679 default n
1680 ---help---
1681 Enable this if you want debugging information using the debug
1682 filesystem (debugfs)
1683
1684 If unsure, say N.
1685
Randy Dunlapecc41d52005-11-07 01:00:29 -08001686config FB_W100
1687 tristate "W100 frame buffer support"
1688 depends on FB && PXA_SHARPSL
1689 select FB_CFB_FILLRECT
1690 select FB_CFB_COPYAREA
1691 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001692 ---help---
1693 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1694
1695 This driver is also available as a module ( = code which can be
1696 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001697 module will be called w100fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001698 say M here and read <file:Documentation/kbuild/modules.txt>.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001699
1700 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001701
Arnaud Patard20fd5762005-09-09 13:10:07 -07001702config FB_S3C2410
1703 tristate "S3C2410 LCD framebuffer support"
1704 depends on FB && ARCH_S3C2410
1705 select FB_CFB_FILLRECT
1706 select FB_CFB_COPYAREA
1707 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07001708 ---help---
1709 Frame buffer driver for the built-in LCD controller in the Samsung
1710 S3C2410 processor.
1711
1712 This driver is also available as a module ( = code which can be
1713 inserted and removed from the running kernel whenever you want). The
1714 module will be called s3c2410fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001715 say M here and read <file:Documentation/kbuild/modules.txt>.
Arnaud Patard20fd5762005-09-09 13:10:07 -07001716
1717 If unsure, say N.
1718config FB_S3C2410_DEBUG
1719 bool "S3C2410 lcd debug messages"
1720 depends on FB_S3C2410
1721 help
1722 Turn on debugging messages. Note that you can set/unset at run time
1723 through sysfs
1724
Ben Dooks5fc404e2007-02-20 13:58:21 -08001725config FB_SM501
1726 tristate "Silicon Motion SM501 framebuffer support"
1727 depends on FB && MFD_SM501
1728 select FB_CFB_FILLRECT
1729 select FB_CFB_COPYAREA
1730 select FB_CFB_IMAGEBLIT
1731 ---help---
1732 Frame buffer driver for the CRT and LCD controllers in the Silicon
1733 Motion SM501.
1734
1735 This driver is also available as a module ( = code which can be
1736 inserted and removed from the running kernel whenever you want). The
1737 module will be called sm501fb. If you want to compile it as a module,
1738 say M here and read <file:Documentation/modules.txt>.
1739
1740 If unsure, say N.
1741
1742
Vitaly Wool36c93662006-07-03 00:24:19 -07001743config FB_PNX4008_DUM
1744 tristate "Display Update Module support on Philips PNX4008 board"
1745 depends on FB && ARCH_PNX4008
1746 ---help---
1747 Say Y here to enable support for PNX4008 Display Update Module (DUM)
1748
1749config FB_PNX4008_DUM_RGB
1750 tristate "RGB Framebuffer support on Philips PNX4008 board"
1751 depends on FB_PNX4008_DUM
1752 select FB_CFB_FILLRECT
1753 select FB_CFB_COPYAREA
1754 select FB_CFB_IMAGEBLIT
1755 ---help---
1756 Say Y here to enable support for PNX4008 RGB Framebuffer
1757
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001758config FB_IBM_GXT4500
1759 tristate "Framebuffer support for IBM GXT4500P adaptor"
1760 depends on PPC
1761 select FB_CFB_FILLRECT
1762 select FB_CFB_COPYAREA
1763 select FB_CFB_IMAGEBLIT
1764 ---help---
1765 Say Y here to enable support for the IBM GXT4500P display
1766 adaptor, found on some IBM System P (pSeries) machines.
1767
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001768config FB_PS3
1769 bool "PS3 GPU framebuffer driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001770 depends on (FB = y) && PS3_PS3AV
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001771 select FB_CFB_FILLRECT
1772 select FB_CFB_COPYAREA
1773 select FB_CFB_IMAGEBLIT
1774 ---help---
1775 Include support for the virtual frame buffer in the PS3 platform.
1776
1777config FB_PS3_DEFAULT_SIZE_M
1778 int "PS3 default frame buffer size (in MiB)"
1779 depends on FB_PS3
1780 default 18
1781 ---help---
1782 This is the default size (in MiB) of the virtual frame buffer in
1783 the PS3.
1784 The default value can be overridden on the kernel command line
1785 using the "ps3fb" option (e.g. "ps3fb=9M");
1786
Andrei Konovalov147394c2007-05-08 00:40:18 -07001787config FB_XILINX
1788 tristate "Xilinx frame buffer support"
1789 depends on FB && XILINX_VIRTEX
1790 select FB_CFB_FILLRECT
1791 select FB_CFB_COPYAREA
1792 select FB_CFB_IMAGEBLIT
1793 ---help---
1794 Include support for the Xilinx ML300/ML403 reference design
1795 framebuffer. ML300 carries a 640*480 LCD display on the board,
1796 ML403 uses a standard DB15 VGA connector.
1797
Linus Torvalds1da177e2005-04-16 15:20:36 -07001798config FB_VIRTUAL
1799 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
1800 depends on FB
Antonino A. Daplas87b48842007-05-08 00:39:01 -07001801 select FB_SYS_FILLRECT
1802 select FB_SYS_COPYAREA
1803 select FB_SYS_IMAGEBLIT
Antonino A. Daplas52102c02007-05-08 00:39:07 -07001804 select FB_SYS_FOPS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001805 ---help---
1806 This is a `virtual' frame buffer device. It operates on a chunk of
1807 unswappable kernel memory instead of on the memory of a graphics
1808 board. This means you cannot see any output sent to this frame
1809 buffer device, while it does consume precious memory. The main use
1810 of this frame buffer device is testing and debugging the frame
1811 buffer subsystem. Do NOT enable it for normal systems! To protect
1812 the innocent, it has to be enabled explicitly at boot time using the
1813 kernel option `video=vfb:'.
1814
1815 To compile this driver as a module, choose M here: the
Mike Frysinger66cf7512006-10-03 01:14:41 -07001816 module will be called vfb. In order to load it, you must use
1817 the vfb_enable=1 option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001818
1819 If unsure, say N.
James Simmonse0e34ef2007-02-10 14:15:43 +00001820
Linus Torvalds1da177e2005-04-16 15:20:36 -07001821if VT
1822 source "drivers/video/console/Kconfig"
1823endif
1824
1825if FB || SGI_NEWPORT_CONSOLE
1826 source "drivers/video/logo/Kconfig"
1827endif
1828
Linus Torvalds1da177e2005-04-16 15:20:36 -07001829endmenu
1830