Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* video.S |
| 2 | * |
| 3 | * Display adapter & video mode setup, version 2.13 (14-May-99) |
| 4 | * |
| 5 | * Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz> |
| 6 | * Based on the original setup.S code (C) Linus Torvalds and Mats Anderson |
| 7 | * |
| 8 | * Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999 |
| 9 | * |
| 10 | * For further information, look at Documentation/svga.txt. |
| 11 | * |
| 12 | */ |
| 13 | |
| 14 | #include <linux/config.h> /* for CONFIG_VIDEO_* */ |
| 15 | |
| 16 | /* Enable autodetection of SVGA adapters and modes. */ |
| 17 | #undef CONFIG_VIDEO_SVGA |
| 18 | |
| 19 | /* Enable autodetection of VESA modes */ |
| 20 | #define CONFIG_VIDEO_VESA |
| 21 | |
| 22 | /* Enable compacting of mode table */ |
| 23 | #define CONFIG_VIDEO_COMPACT |
| 24 | |
| 25 | /* Retain screen contents when switching modes */ |
| 26 | #define CONFIG_VIDEO_RETAIN |
| 27 | |
| 28 | /* Enable local mode list */ |
| 29 | #undef CONFIG_VIDEO_LOCAL |
| 30 | |
| 31 | /* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */ |
| 32 | #undef CONFIG_VIDEO_400_HACK |
| 33 | |
| 34 | /* Hack that lets you force specific BIOS mode ID and specific dimensions */ |
| 35 | #undef CONFIG_VIDEO_GFX_HACK |
| 36 | #define VIDEO_GFX_BIOS_AX 0x4f02 /* 800x600 on ThinkPad */ |
| 37 | #define VIDEO_GFX_BIOS_BX 0x0102 |
| 38 | #define VIDEO_GFX_DUMMY_RESOLUTION 0x6425 /* 100x37 */ |
| 39 | |
| 40 | /* This code uses an extended set of video mode numbers. These include: |
| 41 | * Aliases for standard modes |
| 42 | * NORMAL_VGA (-1) |
| 43 | * EXTENDED_VGA (-2) |
| 44 | * ASK_VGA (-3) |
| 45 | * Video modes numbered by menu position -- NOT RECOMMENDED because of lack |
| 46 | * of compatibility when extending the table. These are between 0x00 and 0xff. |
| 47 | */ |
| 48 | #define VIDEO_FIRST_MENU 0x0000 |
| 49 | |
| 50 | /* Standard BIOS video modes (BIOS number + 0x0100) */ |
| 51 | #define VIDEO_FIRST_BIOS 0x0100 |
| 52 | |
| 53 | /* VESA BIOS video modes (VESA number + 0x0200) */ |
| 54 | #define VIDEO_FIRST_VESA 0x0200 |
| 55 | |
| 56 | /* Video7 special modes (BIOS number + 0x0900) */ |
| 57 | #define VIDEO_FIRST_V7 0x0900 |
| 58 | |
| 59 | /* Special video modes */ |
| 60 | #define VIDEO_FIRST_SPECIAL 0x0f00 |
| 61 | #define VIDEO_80x25 0x0f00 |
| 62 | #define VIDEO_8POINT 0x0f01 |
| 63 | #define VIDEO_80x43 0x0f02 |
| 64 | #define VIDEO_80x28 0x0f03 |
| 65 | #define VIDEO_CURRENT_MODE 0x0f04 |
| 66 | #define VIDEO_80x30 0x0f05 |
| 67 | #define VIDEO_80x34 0x0f06 |
| 68 | #define VIDEO_80x60 0x0f07 |
| 69 | #define VIDEO_GFX_HACK 0x0f08 |
| 70 | #define VIDEO_LAST_SPECIAL 0x0f09 |
| 71 | |
| 72 | /* Video modes given by resolution */ |
| 73 | #define VIDEO_FIRST_RESOLUTION 0x1000 |
| 74 | |
| 75 | /* The "recalculate timings" flag */ |
| 76 | #define VIDEO_RECALC 0x8000 |
| 77 | |
| 78 | /* Positions of various video parameters passed to the kernel */ |
| 79 | /* (see also include/linux/tty.h) */ |
| 80 | #define PARAM_CURSOR_POS 0x00 |
| 81 | #define PARAM_VIDEO_PAGE 0x04 |
| 82 | #define PARAM_VIDEO_MODE 0x06 |
| 83 | #define PARAM_VIDEO_COLS 0x07 |
| 84 | #define PARAM_VIDEO_EGA_BX 0x0a |
| 85 | #define PARAM_VIDEO_LINES 0x0e |
| 86 | #define PARAM_HAVE_VGA 0x0f |
| 87 | #define PARAM_FONT_POINTS 0x10 |
| 88 | |
| 89 | #define PARAM_LFB_WIDTH 0x12 |
| 90 | #define PARAM_LFB_HEIGHT 0x14 |
| 91 | #define PARAM_LFB_DEPTH 0x16 |
| 92 | #define PARAM_LFB_BASE 0x18 |
| 93 | #define PARAM_LFB_SIZE 0x1c |
| 94 | #define PARAM_LFB_LINELENGTH 0x24 |
| 95 | #define PARAM_LFB_COLORS 0x26 |
| 96 | #define PARAM_VESAPM_SEG 0x2e |
| 97 | #define PARAM_VESAPM_OFF 0x30 |
| 98 | #define PARAM_LFB_PAGES 0x32 |
| 99 | #define PARAM_VESA_ATTRIB 0x34 |
Antonino A. Daplas | 89ec4c2 | 2006-04-10 22:55:48 -0700 | [diff] [blame] | 100 | #define PARAM_CAPABILITIES 0x36 |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 101 | |
| 102 | /* Define DO_STORE according to CONFIG_VIDEO_RETAIN */ |
| 103 | #ifdef CONFIG_VIDEO_RETAIN |
| 104 | #define DO_STORE call store_screen |
| 105 | #else |
| 106 | #define DO_STORE |
| 107 | #endif /* CONFIG_VIDEO_RETAIN */ |
| 108 | |
| 109 | # This is the main entry point called by setup.S |
| 110 | # %ds *must* be pointing to the bootsector |
| 111 | video: pushw %ds # We use different segments |
| 112 | pushw %ds # FS contains original DS |
| 113 | popw %fs |
| 114 | pushw %cs # DS is equal to CS |
| 115 | popw %ds |
| 116 | pushw %cs # ES is equal to CS |
| 117 | popw %es |
| 118 | xorw %ax, %ax |
| 119 | movw %ax, %gs # GS is zero |
| 120 | cld |
| 121 | call basic_detect # Basic adapter type testing (EGA/VGA/MDA/CGA) |
| 122 | #ifdef CONFIG_VIDEO_SELECT |
| 123 | movw %fs:(0x01fa), %ax # User selected video mode |
| 124 | cmpw $ASK_VGA, %ax # Bring up the menu |
| 125 | jz vid2 |
| 126 | |
| 127 | call mode_set # Set the mode |
| 128 | jc vid1 |
| 129 | |
| 130 | leaw badmdt, %si # Invalid mode ID |
| 131 | call prtstr |
| 132 | vid2: call mode_menu |
| 133 | vid1: |
| 134 | #ifdef CONFIG_VIDEO_RETAIN |
| 135 | call restore_screen # Restore screen contents |
| 136 | #endif /* CONFIG_VIDEO_RETAIN */ |
| 137 | call store_edid |
| 138 | #endif /* CONFIG_VIDEO_SELECT */ |
| 139 | call mode_params # Store mode parameters |
| 140 | popw %ds # Restore original DS |
| 141 | ret |
| 142 | |
| 143 | # Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel. |
| 144 | basic_detect: |
| 145 | movb $0, %fs:(PARAM_HAVE_VGA) |
| 146 | movb $0x12, %ah # Check EGA/VGA |
| 147 | movb $0x10, %bl |
| 148 | int $0x10 |
| 149 | movw %bx, %fs:(PARAM_VIDEO_EGA_BX) # Identifies EGA to the kernel |
| 150 | cmpb $0x10, %bl # No, it's a CGA/MDA/HGA card. |
| 151 | je basret |
| 152 | |
| 153 | incb adapter |
| 154 | movw $0x1a00, %ax # Check EGA or VGA? |
| 155 | int $0x10 |
| 156 | cmpb $0x1a, %al # 1a means VGA... |
| 157 | jne basret # anything else is EGA. |
| 158 | |
| 159 | incb %fs:(PARAM_HAVE_VGA) # We've detected a VGA |
| 160 | incb adapter |
| 161 | basret: ret |
| 162 | |
| 163 | # Store the video mode parameters for later usage by the kernel. |
| 164 | # This is done by asking the BIOS except for the rows/columns |
| 165 | # parameters in the default 80x25 mode -- these are set directly, |
| 166 | # because some very obscure BIOSes supply insane values. |
| 167 | mode_params: |
| 168 | #ifdef CONFIG_VIDEO_SELECT |
| 169 | cmpb $0, graphic_mode |
| 170 | jnz mopar_gr |
| 171 | #endif |
| 172 | movb $0x03, %ah # Read cursor position |
| 173 | xorb %bh, %bh |
| 174 | int $0x10 |
| 175 | movw %dx, %fs:(PARAM_CURSOR_POS) |
| 176 | movb $0x0f, %ah # Read page/mode/width |
| 177 | int $0x10 |
| 178 | movw %bx, %fs:(PARAM_VIDEO_PAGE) |
| 179 | movw %ax, %fs:(PARAM_VIDEO_MODE) # Video mode and screen width |
| 180 | cmpb $0x7, %al # MDA/HGA => segment differs |
| 181 | jnz mopar0 |
| 182 | |
| 183 | movw $0xb000, video_segment |
| 184 | mopar0: movw %gs:(0x485), %ax # Font size |
| 185 | movw %ax, %fs:(PARAM_FONT_POINTS) # (valid only on EGA/VGA) |
| 186 | movw force_size, %ax # Forced size? |
| 187 | orw %ax, %ax |
| 188 | jz mopar1 |
| 189 | |
| 190 | movb %ah, %fs:(PARAM_VIDEO_COLS) |
| 191 | movb %al, %fs:(PARAM_VIDEO_LINES) |
| 192 | ret |
| 193 | |
| 194 | mopar1: movb $25, %al |
| 195 | cmpb $0, adapter # If we are on CGA/MDA/HGA, the |
| 196 | jz mopar2 # screen must have 25 lines. |
| 197 | |
| 198 | movb %gs:(0x484), %al # On EGA/VGA, use the EGA+ BIOS |
| 199 | incb %al # location of max lines. |
| 200 | mopar2: movb %al, %fs:(PARAM_VIDEO_LINES) |
| 201 | ret |
| 202 | |
| 203 | #ifdef CONFIG_VIDEO_SELECT |
| 204 | # Fetching of VESA frame buffer parameters |
| 205 | mopar_gr: |
| 206 | leaw modelist+1024, %di |
| 207 | movb $0x23, %fs:(PARAM_HAVE_VGA) |
| 208 | movw 16(%di), %ax |
| 209 | movw %ax, %fs:(PARAM_LFB_LINELENGTH) |
| 210 | movw 18(%di), %ax |
| 211 | movw %ax, %fs:(PARAM_LFB_WIDTH) |
| 212 | movw 20(%di), %ax |
| 213 | movw %ax, %fs:(PARAM_LFB_HEIGHT) |
| 214 | movb 25(%di), %al |
| 215 | movb $0, %ah |
| 216 | movw %ax, %fs:(PARAM_LFB_DEPTH) |
| 217 | movb 29(%di), %al |
| 218 | movb $0, %ah |
| 219 | movw %ax, %fs:(PARAM_LFB_PAGES) |
| 220 | movl 40(%di), %eax |
| 221 | movl %eax, %fs:(PARAM_LFB_BASE) |
| 222 | movl 31(%di), %eax |
| 223 | movl %eax, %fs:(PARAM_LFB_COLORS) |
| 224 | movl 35(%di), %eax |
| 225 | movl %eax, %fs:(PARAM_LFB_COLORS+4) |
| 226 | movw 0(%di), %ax |
| 227 | movw %ax, %fs:(PARAM_VESA_ATTRIB) |
| 228 | |
| 229 | # get video mem size |
| 230 | leaw modelist+1024, %di |
| 231 | movw $0x4f00, %ax |
| 232 | int $0x10 |
| 233 | xorl %eax, %eax |
| 234 | movw 18(%di), %ax |
| 235 | movl %eax, %fs:(PARAM_LFB_SIZE) |
| 236 | |
Antonino A. Daplas | 89ec4c2 | 2006-04-10 22:55:48 -0700 | [diff] [blame] | 237 | # store mode capabilities |
| 238 | movl 10(%di), %eax |
| 239 | movl %eax, %fs:(PARAM_CAPABILITIES) |
| 240 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 241 | # switching the DAC to 8-bit is for <= 8 bpp only |
| 242 | movw %fs:(PARAM_LFB_DEPTH), %ax |
| 243 | cmpw $8, %ax |
| 244 | jg dac_done |
| 245 | |
| 246 | # get DAC switching capability |
| 247 | xorl %eax, %eax |
| 248 | movb 10(%di), %al |
| 249 | testb $1, %al |
| 250 | jz dac_set |
| 251 | |
| 252 | # attempt to switch DAC to 8-bit |
| 253 | movw $0x4f08, %ax |
| 254 | movw $0x0800, %bx |
| 255 | int $0x10 |
| 256 | cmpw $0x004f, %ax |
| 257 | jne dac_set |
| 258 | movb %bh, dac_size # store actual DAC size |
| 259 | |
| 260 | dac_set: |
| 261 | # set color size to DAC size |
| 262 | movb dac_size, %al |
| 263 | movb %al, %fs:(PARAM_LFB_COLORS+0) |
| 264 | movb %al, %fs:(PARAM_LFB_COLORS+2) |
| 265 | movb %al, %fs:(PARAM_LFB_COLORS+4) |
| 266 | movb %al, %fs:(PARAM_LFB_COLORS+6) |
| 267 | |
| 268 | # set color offsets to 0 |
| 269 | movb $0, %fs:(PARAM_LFB_COLORS+1) |
| 270 | movb $0, %fs:(PARAM_LFB_COLORS+3) |
| 271 | movb $0, %fs:(PARAM_LFB_COLORS+5) |
| 272 | movb $0, %fs:(PARAM_LFB_COLORS+7) |
| 273 | |
| 274 | dac_done: |
| 275 | # get protected mode interface informations |
| 276 | movw $0x4f0a, %ax |
| 277 | xorw %bx, %bx |
| 278 | xorw %di, %di |
| 279 | int $0x10 |
| 280 | cmp $0x004f, %ax |
| 281 | jnz no_pm |
| 282 | |
| 283 | movw %es, %fs:(PARAM_VESAPM_SEG) |
| 284 | movw %di, %fs:(PARAM_VESAPM_OFF) |
| 285 | no_pm: ret |
| 286 | |
| 287 | # The video mode menu |
| 288 | mode_menu: |
| 289 | leaw keymsg, %si # "Return/Space/Timeout" message |
| 290 | call prtstr |
| 291 | call flush |
| 292 | nokey: call getkt |
| 293 | |
| 294 | cmpb $0x0d, %al # ENTER ? |
| 295 | je listm # yes - manual mode selection |
| 296 | |
| 297 | cmpb $0x20, %al # SPACE ? |
| 298 | je defmd1 # no - repeat |
| 299 | |
| 300 | call beep |
| 301 | jmp nokey |
| 302 | |
| 303 | defmd1: ret # No mode chosen? Default 80x25 |
| 304 | |
| 305 | listm: call mode_table # List mode table |
| 306 | listm0: leaw name_bann, %si # Print adapter name |
| 307 | call prtstr |
| 308 | movw card_name, %si |
| 309 | orw %si, %si |
| 310 | jnz an2 |
| 311 | |
| 312 | movb adapter, %al |
| 313 | leaw old_name, %si |
| 314 | orb %al, %al |
| 315 | jz an1 |
| 316 | |
| 317 | leaw ega_name, %si |
| 318 | decb %al |
| 319 | jz an1 |
| 320 | |
| 321 | leaw vga_name, %si |
| 322 | jmp an1 |
| 323 | |
| 324 | an2: call prtstr |
| 325 | leaw svga_name, %si |
| 326 | an1: call prtstr |
| 327 | leaw listhdr, %si # Table header |
| 328 | call prtstr |
| 329 | movb $0x30, %dl # DL holds mode number |
| 330 | leaw modelist, %si |
| 331 | lm1: cmpw $ASK_VGA, (%si) # End? |
| 332 | jz lm2 |
| 333 | |
| 334 | movb %dl, %al # Menu selection number |
| 335 | call prtchr |
| 336 | call prtsp2 |
| 337 | lodsw |
| 338 | call prthw # Mode ID |
| 339 | call prtsp2 |
| 340 | movb 0x1(%si), %al |
| 341 | call prtdec # Rows |
| 342 | movb $0x78, %al # the letter 'x' |
| 343 | call prtchr |
| 344 | lodsw |
| 345 | call prtdec # Columns |
| 346 | movb $0x0d, %al # New line |
| 347 | call prtchr |
| 348 | movb $0x0a, %al |
| 349 | call prtchr |
| 350 | incb %dl # Next character |
| 351 | cmpb $0x3a, %dl |
| 352 | jnz lm1 |
| 353 | |
| 354 | movb $0x61, %dl |
| 355 | jmp lm1 |
| 356 | |
| 357 | lm2: leaw prompt, %si # Mode prompt |
| 358 | call prtstr |
| 359 | leaw edit_buf, %di # Editor buffer |
| 360 | lm3: call getkey |
| 361 | cmpb $0x0d, %al # Enter? |
| 362 | jz lment |
| 363 | |
| 364 | cmpb $0x08, %al # Backspace? |
| 365 | jz lmbs |
| 366 | |
| 367 | cmpb $0x20, %al # Printable? |
| 368 | jc lm3 |
| 369 | |
| 370 | cmpw $edit_buf+4, %di # Enough space? |
| 371 | jz lm3 |
| 372 | |
| 373 | stosb |
| 374 | call prtchr |
| 375 | jmp lm3 |
| 376 | |
| 377 | lmbs: cmpw $edit_buf, %di # Backspace |
| 378 | jz lm3 |
| 379 | |
| 380 | decw %di |
| 381 | movb $0x08, %al |
| 382 | call prtchr |
| 383 | call prtspc |
| 384 | movb $0x08, %al |
| 385 | call prtchr |
| 386 | jmp lm3 |
| 387 | |
| 388 | lment: movb $0, (%di) |
| 389 | leaw crlft, %si |
| 390 | call prtstr |
| 391 | leaw edit_buf, %si |
| 392 | cmpb $0, (%si) # Empty string = default mode |
| 393 | jz lmdef |
| 394 | |
| 395 | cmpb $0, 1(%si) # One character = menu selection |
| 396 | jz mnusel |
| 397 | |
| 398 | cmpw $0x6373, (%si) # "scan" => mode scanning |
| 399 | jnz lmhx |
| 400 | |
| 401 | cmpw $0x6e61, 2(%si) |
| 402 | jz lmscan |
| 403 | |
| 404 | lmhx: xorw %bx, %bx # Else => mode ID in hex |
| 405 | lmhex: lodsb |
| 406 | orb %al, %al |
| 407 | jz lmuse1 |
| 408 | |
| 409 | subb $0x30, %al |
| 410 | jc lmbad |
| 411 | |
| 412 | cmpb $10, %al |
| 413 | jc lmhx1 |
| 414 | |
| 415 | subb $7, %al |
| 416 | andb $0xdf, %al |
| 417 | cmpb $10, %al |
| 418 | jc lmbad |
| 419 | |
| 420 | cmpb $16, %al |
| 421 | jnc lmbad |
| 422 | |
| 423 | lmhx1: shlw $4, %bx |
| 424 | orb %al, %bl |
| 425 | jmp lmhex |
| 426 | |
| 427 | lmuse1: movw %bx, %ax |
| 428 | jmp lmuse |
| 429 | |
| 430 | mnusel: lodsb # Menu selection |
| 431 | xorb %ah, %ah |
| 432 | subb $0x30, %al |
| 433 | jc lmbad |
| 434 | |
| 435 | cmpb $10, %al |
| 436 | jc lmuse |
| 437 | |
| 438 | cmpb $0x61-0x30, %al |
| 439 | jc lmbad |
| 440 | |
| 441 | subb $0x61-0x30-10, %al |
| 442 | cmpb $36, %al |
| 443 | jnc lmbad |
| 444 | |
| 445 | lmuse: call mode_set |
| 446 | jc lmdef |
| 447 | |
| 448 | lmbad: leaw unknt, %si |
| 449 | call prtstr |
| 450 | jmp lm2 |
| 451 | lmscan: cmpb $0, adapter # Scanning only on EGA/VGA |
| 452 | jz lmbad |
| 453 | |
| 454 | movw $0, mt_end # Scanning of modes is |
| 455 | movb $1, scanning # done as new autodetection. |
| 456 | call mode_table |
| 457 | jmp listm0 |
| 458 | lmdef: ret |
| 459 | |
| 460 | # Additional parts of mode_set... (relative jumps, you know) |
| 461 | setv7: # Video7 extended modes |
| 462 | DO_STORE |
| 463 | subb $VIDEO_FIRST_V7>>8, %bh |
| 464 | movw $0x6f05, %ax |
| 465 | int $0x10 |
| 466 | stc |
| 467 | ret |
| 468 | |
| 469 | _setrec: jmp setrec # Ugly... |
| 470 | _set_80x25: jmp set_80x25 |
| 471 | |
| 472 | # Aliases for backward compatibility. |
| 473 | setalias: |
| 474 | movw $VIDEO_80x25, %ax |
| 475 | incw %bx |
| 476 | jz mode_set |
| 477 | |
| 478 | movb $VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al |
| 479 | incw %bx |
| 480 | jnz setbad # Fall-through! |
| 481 | |
| 482 | # Setting of user mode (AX=mode ID) => CF=success |
| 483 | mode_set: |
| 484 | movw %ax, %fs:(0x01fa) # Store mode for use in acpi_wakeup.S |
| 485 | movw %ax, %bx |
| 486 | cmpb $0xff, %ah |
| 487 | jz setalias |
| 488 | |
| 489 | testb $VIDEO_RECALC>>8, %ah |
| 490 | jnz _setrec |
| 491 | |
| 492 | cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah |
| 493 | jnc setres |
| 494 | |
| 495 | cmpb $VIDEO_FIRST_SPECIAL>>8, %ah |
| 496 | jz setspc |
| 497 | |
| 498 | cmpb $VIDEO_FIRST_V7>>8, %ah |
| 499 | jz setv7 |
| 500 | |
| 501 | cmpb $VIDEO_FIRST_VESA>>8, %ah |
| 502 | jnc check_vesa |
| 503 | |
| 504 | orb %ah, %ah |
| 505 | jz setmenu |
| 506 | |
| 507 | decb %ah |
| 508 | jz setbios |
| 509 | |
| 510 | setbad: clc |
| 511 | movb $0, do_restore # The screen needn't be restored |
| 512 | ret |
| 513 | |
| 514 | setvesa: |
| 515 | DO_STORE |
| 516 | subb $VIDEO_FIRST_VESA>>8, %bh |
| 517 | movw $0x4f02, %ax # VESA BIOS mode set call |
| 518 | int $0x10 |
| 519 | cmpw $0x004f, %ax # AL=4f if implemented |
| 520 | jnz setbad # AH=0 if OK |
| 521 | |
| 522 | stc |
| 523 | ret |
| 524 | |
| 525 | setbios: |
| 526 | DO_STORE |
| 527 | int $0x10 # Standard BIOS mode set call |
| 528 | pushw %bx |
| 529 | movb $0x0f, %ah # Check if really set |
| 530 | int $0x10 |
| 531 | popw %bx |
| 532 | cmpb %bl, %al |
| 533 | jnz setbad |
| 534 | |
| 535 | stc |
| 536 | ret |
| 537 | |
| 538 | setspc: xorb %bh, %bh # Set special mode |
| 539 | cmpb $VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl |
| 540 | jnc setbad |
| 541 | |
| 542 | addw %bx, %bx |
| 543 | jmp *spec_inits(%bx) |
| 544 | |
| 545 | setmenu: |
| 546 | orb %al, %al # 80x25 is an exception |
| 547 | jz _set_80x25 |
| 548 | |
| 549 | pushw %bx # Set mode chosen from menu |
| 550 | call mode_table # Build the mode table |
| 551 | popw %ax |
| 552 | shlw $2, %ax |
| 553 | addw %ax, %si |
| 554 | cmpw %di, %si |
| 555 | jnc setbad |
| 556 | |
| 557 | movw (%si), %ax # Fetch mode ID |
| 558 | _m_s: jmp mode_set |
| 559 | |
| 560 | setres: pushw %bx # Set mode chosen by resolution |
| 561 | call mode_table |
| 562 | popw %bx |
| 563 | xchgb %bl, %bh |
| 564 | setr1: lodsw |
| 565 | cmpw $ASK_VGA, %ax # End of the list? |
| 566 | jz setbad |
| 567 | |
| 568 | lodsw |
| 569 | cmpw %bx, %ax |
| 570 | jnz setr1 |
| 571 | |
| 572 | movw -4(%si), %ax # Fetch mode ID |
| 573 | jmp _m_s |
| 574 | |
| 575 | check_vesa: |
| 576 | leaw modelist+1024, %di |
| 577 | subb $VIDEO_FIRST_VESA>>8, %bh |
| 578 | movw %bx, %cx # Get mode information structure |
| 579 | movw $0x4f01, %ax |
| 580 | int $0x10 |
| 581 | addb $VIDEO_FIRST_VESA>>8, %bh |
| 582 | cmpw $0x004f, %ax |
| 583 | jnz setbad |
| 584 | |
| 585 | movb (%di), %al # Check capabilities. |
| 586 | andb $0x19, %al |
| 587 | cmpb $0x09, %al |
| 588 | jz setvesa # This is a text mode |
| 589 | |
| 590 | movb (%di), %al # Check capabilities. |
| 591 | andb $0x99, %al |
| 592 | cmpb $0x99, %al |
| 593 | jnz _setbad # Doh! No linear frame buffer. |
| 594 | |
| 595 | subb $VIDEO_FIRST_VESA>>8, %bh |
| 596 | orw $0x4000, %bx # Use linear frame buffer |
| 597 | movw $0x4f02, %ax # VESA BIOS mode set call |
| 598 | int $0x10 |
| 599 | cmpw $0x004f, %ax # AL=4f if implemented |
| 600 | jnz _setbad # AH=0 if OK |
| 601 | |
| 602 | movb $1, graphic_mode # flag graphic mode |
| 603 | movb $0, do_restore # no screen restore |
| 604 | stc |
| 605 | ret |
| 606 | |
| 607 | _setbad: jmp setbad # Ugly... |
| 608 | |
| 609 | # Recalculate vertical display end registers -- this fixes various |
| 610 | # inconsistencies of extended modes on many adapters. Called when |
| 611 | # the VIDEO_RECALC flag is set in the mode ID. |
| 612 | |
| 613 | setrec: subb $VIDEO_RECALC>>8, %ah # Set the base mode |
| 614 | call mode_set |
| 615 | jnc rct3 |
| 616 | |
| 617 | movw %gs:(0x485), %ax # Font size in pixels |
| 618 | movb %gs:(0x484), %bl # Number of rows |
| 619 | incb %bl |
| 620 | mulb %bl # Number of visible |
| 621 | decw %ax # scan lines - 1 |
| 622 | movw $0x3d4, %dx |
| 623 | movw %ax, %bx |
| 624 | movb $0x12, %al # Lower 8 bits |
| 625 | movb %bl, %ah |
| 626 | outw %ax, %dx |
| 627 | movb $0x07, %al # Bits 8 and 9 in the overflow register |
| 628 | call inidx |
| 629 | xchgb %al, %ah |
| 630 | andb $0xbd, %ah |
| 631 | shrb %bh |
| 632 | jnc rct1 |
| 633 | orb $0x02, %ah |
| 634 | rct1: shrb %bh |
| 635 | jnc rct2 |
| 636 | orb $0x40, %ah |
| 637 | rct2: movb $0x07, %al |
| 638 | outw %ax, %dx |
| 639 | stc |
| 640 | rct3: ret |
| 641 | |
| 642 | # Table of routines for setting of the special modes. |
| 643 | spec_inits: |
| 644 | .word set_80x25 |
| 645 | .word set_8pixel |
| 646 | .word set_80x43 |
| 647 | .word set_80x28 |
| 648 | .word set_current |
| 649 | .word set_80x30 |
| 650 | .word set_80x34 |
| 651 | .word set_80x60 |
| 652 | .word set_gfx |
| 653 | |
| 654 | # Set the 80x25 mode. If already set, do nothing. |
| 655 | set_80x25: |
| 656 | movw $0x5019, force_size # Override possibly broken BIOS |
| 657 | use_80x25: |
| 658 | #ifdef CONFIG_VIDEO_400_HACK |
| 659 | movw $0x1202, %ax # Force 400 scan lines |
| 660 | movb $0x30, %bl |
| 661 | int $0x10 |
| 662 | #else |
| 663 | movb $0x0f, %ah # Get current mode ID |
| 664 | int $0x10 |
| 665 | cmpw $0x5007, %ax # Mode 7 (80x25 mono) is the only one available |
| 666 | jz st80 # on CGA/MDA/HGA and is also available on EGAM |
| 667 | |
| 668 | cmpw $0x5003, %ax # Unknown mode, force 80x25 color |
| 669 | jnz force3 |
| 670 | |
| 671 | st80: cmpb $0, adapter # CGA/MDA/HGA => mode 3/7 is always 80x25 |
| 672 | jz set80 |
| 673 | |
| 674 | movb %gs:(0x0484), %al # This is EGA+ -- beware of 80x50 etc. |
| 675 | orb %al, %al # Some buggy BIOS'es set 0 rows |
| 676 | jz set80 |
| 677 | |
| 678 | cmpb $24, %al # It's hopefully correct |
| 679 | jz set80 |
| 680 | #endif /* CONFIG_VIDEO_400_HACK */ |
| 681 | force3: DO_STORE |
| 682 | movw $0x0003, %ax # Forced set |
| 683 | int $0x10 |
| 684 | set80: stc |
| 685 | ret |
| 686 | |
| 687 | # Set the 80x50/80x43 8-pixel mode. Simple BIOS calls. |
| 688 | set_8pixel: |
| 689 | DO_STORE |
| 690 | call use_80x25 # The base is 80x25 |
| 691 | set_8pt: |
| 692 | movw $0x1112, %ax # Use 8x8 font |
| 693 | xorb %bl, %bl |
| 694 | int $0x10 |
| 695 | movw $0x1200, %ax # Use alternate print screen |
| 696 | movb $0x20, %bl |
| 697 | int $0x10 |
| 698 | movw $0x1201, %ax # Turn off cursor emulation |
| 699 | movb $0x34, %bl |
| 700 | int $0x10 |
| 701 | movb $0x01, %ah # Define cursor scan lines 6-7 |
| 702 | movw $0x0607, %cx |
| 703 | int $0x10 |
| 704 | set_current: |
| 705 | stc |
| 706 | ret |
| 707 | |
| 708 | # Set the 80x28 mode. This mode works on all VGA's, because it's a standard |
| 709 | # 80x25 mode with 14-point fonts instead of 16-point. |
| 710 | set_80x28: |
| 711 | DO_STORE |
| 712 | call use_80x25 # The base is 80x25 |
| 713 | set14: movw $0x1111, %ax # Use 9x14 font |
| 714 | xorb %bl, %bl |
| 715 | int $0x10 |
| 716 | movb $0x01, %ah # Define cursor scan lines 11-12 |
| 717 | movw $0x0b0c, %cx |
| 718 | int $0x10 |
| 719 | stc |
| 720 | ret |
| 721 | |
| 722 | # Set the 80x43 mode. This mode is works on all VGA's. |
| 723 | # It's a 350-scanline mode with 8-pixel font. |
| 724 | set_80x43: |
| 725 | DO_STORE |
| 726 | movw $0x1201, %ax # Set 350 scans |
| 727 | movb $0x30, %bl |
| 728 | int $0x10 |
| 729 | movw $0x0003, %ax # Reset video mode |
| 730 | int $0x10 |
| 731 | jmp set_8pt # Use 8-pixel font |
| 732 | |
| 733 | # Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font. |
| 734 | set_80x30: |
| 735 | call use_80x25 # Start with real 80x25 |
| 736 | DO_STORE |
| 737 | movw $0x3cc, %dx # Get CRTC port |
| 738 | inb %dx, %al |
| 739 | movb $0xd4, %dl |
| 740 | rorb %al # Mono or color? |
| 741 | jc set48a |
| 742 | |
| 743 | movb $0xb4, %dl |
| 744 | set48a: movw $0x0c11, %ax # Vertical sync end (also unlocks CR0-7) |
| 745 | call outidx |
| 746 | movw $0x0b06, %ax # Vertical total |
| 747 | call outidx |
| 748 | movw $0x3e07, %ax # (Vertical) overflow |
| 749 | call outidx |
| 750 | movw $0xea10, %ax # Vertical sync start |
| 751 | call outidx |
| 752 | movw $0xdf12, %ax # Vertical display end |
| 753 | call outidx |
| 754 | movw $0xe715, %ax # Vertical blank start |
| 755 | call outidx |
| 756 | movw $0x0416, %ax # Vertical blank end |
| 757 | call outidx |
| 758 | pushw %dx |
| 759 | movb $0xcc, %dl # Misc output register (read) |
| 760 | inb %dx, %al |
| 761 | movb $0xc2, %dl # (write) |
| 762 | andb $0x0d, %al # Preserve clock select bits and color bit |
| 763 | orb $0xe2, %al # Set correct sync polarity |
| 764 | outb %al, %dx |
| 765 | popw %dx |
| 766 | movw $0x501e, force_size |
| 767 | stc # That's all. |
| 768 | ret |
| 769 | |
| 770 | # Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font. |
| 771 | set_80x34: |
| 772 | call set_80x30 # Set 480 scans |
| 773 | call set14 # And 14-pt font |
| 774 | movw $0xdb12, %ax # VGA vertical display end |
| 775 | movw $0x5022, force_size |
| 776 | setvde: call outidx |
| 777 | stc |
| 778 | ret |
| 779 | |
| 780 | # Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font. |
| 781 | set_80x60: |
| 782 | call set_80x30 # Set 480 scans |
| 783 | call set_8pt # And 8-pt font |
| 784 | movw $0xdf12, %ax # VGA vertical display end |
| 785 | movw $0x503c, force_size |
| 786 | jmp setvde |
| 787 | |
| 788 | # Special hack for ThinkPad graphics |
| 789 | set_gfx: |
| 790 | #ifdef CONFIG_VIDEO_GFX_HACK |
| 791 | movw $VIDEO_GFX_BIOS_AX, %ax |
| 792 | movw $VIDEO_GFX_BIOS_BX, %bx |
| 793 | int $0x10 |
| 794 | movw $VIDEO_GFX_DUMMY_RESOLUTION, force_size |
| 795 | stc |
| 796 | #endif |
| 797 | ret |
| 798 | |
| 799 | #ifdef CONFIG_VIDEO_RETAIN |
| 800 | |
| 801 | # Store screen contents to temporary buffer. |
| 802 | store_screen: |
| 803 | cmpb $0, do_restore # Already stored? |
| 804 | jnz stsr |
| 805 | |
| 806 | testb $CAN_USE_HEAP, loadflags # Have we space for storing? |
| 807 | jz stsr |
| 808 | |
| 809 | pushw %ax |
| 810 | pushw %bx |
| 811 | pushw force_size # Don't force specific size |
| 812 | movw $0, force_size |
| 813 | call mode_params # Obtain params of current mode |
| 814 | popw force_size |
| 815 | movb %fs:(PARAM_VIDEO_LINES), %ah |
| 816 | movb %fs:(PARAM_VIDEO_COLS), %al |
| 817 | movw %ax, %bx # BX=dimensions |
| 818 | mulb %ah |
| 819 | movw %ax, %cx # CX=number of characters |
| 820 | addw %ax, %ax # Calculate image size |
| 821 | addw $modelist+1024+4, %ax |
| 822 | cmpw heap_end_ptr, %ax |
| 823 | jnc sts1 # Unfortunately, out of memory |
| 824 | |
| 825 | movw %fs:(PARAM_CURSOR_POS), %ax # Store mode params |
| 826 | leaw modelist+1024, %di |
| 827 | stosw |
| 828 | movw %bx, %ax |
| 829 | stosw |
| 830 | pushw %ds # Store the screen |
| 831 | movw video_segment, %ds |
| 832 | xorw %si, %si |
| 833 | rep |
| 834 | movsw |
| 835 | popw %ds |
| 836 | incb do_restore # Screen will be restored later |
| 837 | sts1: popw %bx |
| 838 | popw %ax |
| 839 | stsr: ret |
| 840 | |
| 841 | # Restore screen contents from temporary buffer. |
| 842 | restore_screen: |
| 843 | cmpb $0, do_restore # Has the screen been stored? |
| 844 | jz res1 |
| 845 | |
| 846 | call mode_params # Get parameters of current mode |
| 847 | movb %fs:(PARAM_VIDEO_LINES), %cl |
| 848 | movb %fs:(PARAM_VIDEO_COLS), %ch |
| 849 | leaw modelist+1024, %si # Screen buffer |
| 850 | lodsw # Set cursor position |
| 851 | movw %ax, %dx |
| 852 | cmpb %cl, %dh |
| 853 | jc res2 |
| 854 | |
| 855 | movb %cl, %dh |
| 856 | decb %dh |
| 857 | res2: cmpb %ch, %dl |
| 858 | jc res3 |
| 859 | |
| 860 | movb %ch, %dl |
| 861 | decb %dl |
| 862 | res3: movb $0x02, %ah |
| 863 | movb $0x00, %bh |
| 864 | int $0x10 |
| 865 | lodsw # Display size |
| 866 | movb %ah, %dl # DL=number of lines |
| 867 | movb $0, %ah # BX=phys. length of orig. line |
| 868 | movw %ax, %bx |
| 869 | cmpb %cl, %dl # Too many? |
| 870 | jc res4 |
| 871 | |
| 872 | pushw %ax |
| 873 | movb %dl, %al |
| 874 | subb %cl, %al |
| 875 | mulb %bl |
| 876 | addw %ax, %si |
| 877 | addw %ax, %si |
| 878 | popw %ax |
| 879 | movb %cl, %dl |
| 880 | res4: cmpb %ch, %al # Too wide? |
| 881 | jc res5 |
| 882 | |
| 883 | movb %ch, %al # AX=width of src. line |
| 884 | res5: movb $0, %cl |
| 885 | xchgb %ch, %cl |
| 886 | movw %cx, %bp # BP=width of dest. line |
| 887 | pushw %es |
| 888 | movw video_segment, %es |
| 889 | xorw %di, %di # Move the data |
| 890 | addw %bx, %bx # Convert BX and BP to _bytes_ |
| 891 | addw %bp, %bp |
| 892 | res6: pushw %si |
| 893 | pushw %di |
| 894 | movw %ax, %cx |
| 895 | rep |
| 896 | movsw |
| 897 | popw %di |
| 898 | popw %si |
| 899 | addw %bp, %di |
| 900 | addw %bx, %si |
| 901 | decb %dl |
| 902 | jnz res6 |
| 903 | |
| 904 | popw %es # Done |
| 905 | res1: ret |
| 906 | #endif /* CONFIG_VIDEO_RETAIN */ |
| 907 | |
| 908 | # Write to indexed VGA register (AL=index, AH=data, DX=index reg. port) |
| 909 | outidx: outb %al, %dx |
| 910 | pushw %ax |
| 911 | movb %ah, %al |
| 912 | incw %dx |
| 913 | outb %al, %dx |
| 914 | decw %dx |
| 915 | popw %ax |
| 916 | ret |
| 917 | |
| 918 | # Build the table of video modes (stored after the setup.S code at the |
| 919 | # `modelist' label. Each video mode record looks like: |
| 920 | # .word MODE-ID (our special mode ID (see above)) |
| 921 | # .byte rows (number of rows) |
| 922 | # .byte columns (number of columns) |
| 923 | # Returns address of the end of the table in DI, the end is marked |
| 924 | # with a ASK_VGA ID. |
| 925 | mode_table: |
| 926 | movw mt_end, %di # Already filled? |
| 927 | orw %di, %di |
| 928 | jnz mtab1x |
| 929 | |
| 930 | leaw modelist, %di # Store standard modes: |
| 931 | movl $VIDEO_80x25 + 0x50190000, %eax # The 80x25 mode (ALL) |
| 932 | stosl |
| 933 | movb adapter, %al # CGA/MDA/HGA -- no more modes |
| 934 | orb %al, %al |
| 935 | jz mtabe |
| 936 | |
| 937 | decb %al |
| 938 | jnz mtabv |
| 939 | |
| 940 | movl $VIDEO_8POINT + 0x502b0000, %eax # The 80x43 EGA mode |
| 941 | stosl |
| 942 | jmp mtabe |
| 943 | |
| 944 | mtab1x: jmp mtab1 |
| 945 | |
| 946 | mtabv: leaw vga_modes, %si # All modes for std VGA |
| 947 | movw $vga_modes_end-vga_modes, %cx |
| 948 | rep # I'm unable to use movsw as I don't know how to store a half |
| 949 | movsb # of the expression above to cx without using explicit shr. |
| 950 | |
| 951 | cmpb $0, scanning # Mode scan requested? |
| 952 | jz mscan1 |
| 953 | |
| 954 | call mode_scan |
| 955 | mscan1: |
| 956 | |
| 957 | #ifdef CONFIG_VIDEO_LOCAL |
| 958 | call local_modes |
| 959 | #endif /* CONFIG_VIDEO_LOCAL */ |
| 960 | |
| 961 | #ifdef CONFIG_VIDEO_VESA |
| 962 | call vesa_modes # Detect VESA VGA modes |
| 963 | #endif /* CONFIG_VIDEO_VESA */ |
| 964 | |
| 965 | #ifdef CONFIG_VIDEO_SVGA |
| 966 | cmpb $0, scanning # Bypass when scanning |
| 967 | jnz mscan2 |
| 968 | |
| 969 | call svga_modes # Detect SVGA cards & modes |
| 970 | mscan2: |
| 971 | #endif /* CONFIG_VIDEO_SVGA */ |
| 972 | |
| 973 | mtabe: |
| 974 | |
| 975 | #ifdef CONFIG_VIDEO_COMPACT |
| 976 | leaw modelist, %si |
| 977 | movw %di, %dx |
| 978 | movw %si, %di |
| 979 | cmt1: cmpw %dx, %si # Scan all modes |
| 980 | jz cmt2 |
| 981 | |
| 982 | leaw modelist, %bx # Find in previous entries |
| 983 | movw 2(%si), %cx |
| 984 | cmt3: cmpw %bx, %si |
| 985 | jz cmt4 |
| 986 | |
| 987 | cmpw 2(%bx), %cx # Found => don't copy this entry |
| 988 | jz cmt5 |
| 989 | |
| 990 | addw $4, %bx |
| 991 | jmp cmt3 |
| 992 | |
| 993 | cmt4: movsl # Copy entry |
| 994 | jmp cmt1 |
| 995 | |
| 996 | cmt5: addw $4, %si # Skip entry |
| 997 | jmp cmt1 |
| 998 | |
| 999 | cmt2: |
| 1000 | #endif /* CONFIG_VIDEO_COMPACT */ |
| 1001 | |
| 1002 | movw $ASK_VGA, (%di) # End marker |
| 1003 | movw %di, mt_end |
| 1004 | mtab1: leaw modelist, %si # SI=mode list, DI=list end |
| 1005 | ret0: ret |
| 1006 | |
| 1007 | # Modes usable on all standard VGAs |
| 1008 | vga_modes: |
| 1009 | .word VIDEO_8POINT |
| 1010 | .word 0x5032 # 80x50 |
| 1011 | .word VIDEO_80x43 |
| 1012 | .word 0x502b # 80x43 |
| 1013 | .word VIDEO_80x28 |
| 1014 | .word 0x501c # 80x28 |
| 1015 | .word VIDEO_80x30 |
| 1016 | .word 0x501e # 80x30 |
| 1017 | .word VIDEO_80x34 |
| 1018 | .word 0x5022 # 80x34 |
| 1019 | .word VIDEO_80x60 |
| 1020 | .word 0x503c # 80x60 |
| 1021 | #ifdef CONFIG_VIDEO_GFX_HACK |
| 1022 | .word VIDEO_GFX_HACK |
| 1023 | .word VIDEO_GFX_DUMMY_RESOLUTION |
| 1024 | #endif |
| 1025 | |
| 1026 | vga_modes_end: |
| 1027 | # Detect VESA modes. |
| 1028 | |
| 1029 | #ifdef CONFIG_VIDEO_VESA |
| 1030 | vesa_modes: |
| 1031 | cmpb $2, adapter # VGA only |
| 1032 | jnz ret0 |
| 1033 | |
| 1034 | movw %di, %bp # BP=original mode table end |
| 1035 | addw $0x200, %di # Buffer space |
| 1036 | movw $0x4f00, %ax # VESA Get card info call |
| 1037 | int $0x10 |
| 1038 | movw %bp, %di |
| 1039 | cmpw $0x004f, %ax # Successful? |
| 1040 | jnz ret0 |
| 1041 | |
| 1042 | cmpw $0x4556, 0x200(%di) |
| 1043 | jnz ret0 |
| 1044 | |
| 1045 | cmpw $0x4153, 0x202(%di) |
| 1046 | jnz ret0 |
| 1047 | |
| 1048 | movw $vesa_name, card_name # Set name to "VESA VGA" |
| 1049 | pushw %gs |
| 1050 | lgsw 0x20e(%di), %si # GS:SI=mode list |
| 1051 | movw $128, %cx # Iteration limit |
| 1052 | vesa1: |
| 1053 | # gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst. |
| 1054 | # XXX: lodsw %gs:(%si), %ax # Get next mode in the list |
| 1055 | gs; lodsw |
| 1056 | cmpw $0xffff, %ax # End of the table? |
| 1057 | jz vesar |
| 1058 | |
| 1059 | cmpw $0x0080, %ax # Check validity of mode ID |
| 1060 | jc vesa2 |
| 1061 | |
| 1062 | orb %ah, %ah # Valid IDs: 0x0000-0x007f/0x0100-0x07ff |
| 1063 | jz vesan # Certain BIOSes report 0x80-0xff! |
| 1064 | |
| 1065 | cmpw $0x0800, %ax |
| 1066 | jnc vesae |
| 1067 | |
| 1068 | vesa2: pushw %cx |
| 1069 | movw %ax, %cx # Get mode information structure |
| 1070 | movw $0x4f01, %ax |
| 1071 | int $0x10 |
| 1072 | movw %cx, %bx # BX=mode number |
| 1073 | addb $VIDEO_FIRST_VESA>>8, %bh |
| 1074 | popw %cx |
| 1075 | cmpw $0x004f, %ax |
| 1076 | jnz vesan # Don't report errors (buggy BIOSES) |
| 1077 | |
| 1078 | movb (%di), %al # Check capabilities. We require |
| 1079 | andb $0x19, %al # a color text mode. |
| 1080 | cmpb $0x09, %al |
| 1081 | jnz vesan |
| 1082 | |
| 1083 | cmpw $0xb800, 8(%di) # Standard video memory address required |
| 1084 | jnz vesan |
| 1085 | |
| 1086 | testb $2, (%di) # Mode characteristics supplied? |
| 1087 | movw %bx, (%di) # Store mode number |
| 1088 | jz vesa3 |
| 1089 | |
| 1090 | xorw %dx, %dx |
| 1091 | movw 0x12(%di), %bx # Width |
| 1092 | orb %bh, %bh |
| 1093 | jnz vesan |
| 1094 | |
| 1095 | movb %bl, 0x3(%di) |
| 1096 | movw 0x14(%di), %ax # Height |
| 1097 | orb %ah, %ah |
| 1098 | jnz vesan |
| 1099 | |
| 1100 | movb %al, 2(%di) |
| 1101 | mulb %bl |
| 1102 | cmpw $8193, %ax # Small enough for Linux console driver? |
| 1103 | jnc vesan |
| 1104 | |
| 1105 | jmp vesaok |
| 1106 | |
| 1107 | vesa3: subw $0x8108, %bx # This mode has no detailed info specified, |
| 1108 | jc vesan # so it must be a standard VESA mode. |
| 1109 | |
| 1110 | cmpw $5, %bx |
| 1111 | jnc vesan |
| 1112 | |
| 1113 | movw vesa_text_mode_table(%bx), %ax |
| 1114 | movw %ax, 2(%di) |
| 1115 | vesaok: addw $4, %di # The mode is valid. Store it. |
| 1116 | vesan: loop vesa1 # Next mode. Limit exceeded => error |
| 1117 | vesae: leaw vesaer, %si |
| 1118 | call prtstr |
| 1119 | movw %bp, %di # Discard already found modes. |
| 1120 | vesar: popw %gs |
| 1121 | ret |
| 1122 | |
| 1123 | # Dimensions of standard VESA text modes |
| 1124 | vesa_text_mode_table: |
| 1125 | .byte 60, 80 # 0108 |
| 1126 | .byte 25, 132 # 0109 |
| 1127 | .byte 43, 132 # 010A |
| 1128 | .byte 50, 132 # 010B |
| 1129 | .byte 60, 132 # 010C |
| 1130 | #endif /* CONFIG_VIDEO_VESA */ |
| 1131 | |
| 1132 | # Scan for video modes. A bit dirty, but should work. |
| 1133 | mode_scan: |
| 1134 | movw $0x0100, %cx # Start with mode 0 |
| 1135 | scm1: movb $0, %ah # Test the mode |
| 1136 | movb %cl, %al |
| 1137 | int $0x10 |
| 1138 | movb $0x0f, %ah |
| 1139 | int $0x10 |
| 1140 | cmpb %cl, %al |
| 1141 | jnz scm2 # Mode not set |
| 1142 | |
| 1143 | movw $0x3c0, %dx # Test if it's a text mode |
| 1144 | movb $0x10, %al # Mode bits |
| 1145 | call inidx |
| 1146 | andb $0x03, %al |
| 1147 | jnz scm2 |
| 1148 | |
| 1149 | movb $0xce, %dl # Another set of mode bits |
| 1150 | movb $0x06, %al |
| 1151 | call inidx |
| 1152 | shrb %al |
| 1153 | jc scm2 |
| 1154 | |
| 1155 | movb $0xd4, %dl # Cursor location |
| 1156 | movb $0x0f, %al |
| 1157 | call inidx |
| 1158 | orb %al, %al |
| 1159 | jnz scm2 |
| 1160 | |
| 1161 | movw %cx, %ax # Ok, store the mode |
| 1162 | stosw |
| 1163 | movb %gs:(0x484), %al # Number of rows |
| 1164 | incb %al |
| 1165 | stosb |
| 1166 | movw %gs:(0x44a), %ax # Number of columns |
| 1167 | stosb |
| 1168 | scm2: incb %cl |
| 1169 | jns scm1 |
| 1170 | |
| 1171 | movw $0x0003, %ax # Return back to mode 3 |
| 1172 | int $0x10 |
| 1173 | ret |
| 1174 | |
| 1175 | tstidx: outw %ax, %dx # OUT DX,AX and inidx |
| 1176 | inidx: outb %al, %dx # Read from indexed VGA register |
| 1177 | incw %dx # AL=index, DX=index reg port -> AL=data |
| 1178 | inb %dx, %al |
| 1179 | decw %dx |
| 1180 | ret |
| 1181 | |
| 1182 | # Try to detect type of SVGA card and supply (usually approximate) video |
| 1183 | # mode table for it. |
| 1184 | |
| 1185 | #ifdef CONFIG_VIDEO_SVGA |
| 1186 | svga_modes: |
| 1187 | leaw svga_table, %si # Test all known SVGA adapters |
| 1188 | dosvga: lodsw |
| 1189 | movw %ax, %bp # Default mode table |
| 1190 | orw %ax, %ax |
| 1191 | jz didsv1 |
| 1192 | |
| 1193 | lodsw # Pointer to test routine |
| 1194 | pushw %si |
| 1195 | pushw %di |
| 1196 | pushw %es |
| 1197 | movw $0xc000, %bx |
| 1198 | movw %bx, %es |
| 1199 | call *%ax # Call test routine |
| 1200 | popw %es |
| 1201 | popw %di |
| 1202 | popw %si |
| 1203 | orw %bp, %bp |
| 1204 | jz dosvga |
| 1205 | |
| 1206 | movw %bp, %si # Found, copy the modes |
| 1207 | movb svga_prefix, %ah |
| 1208 | cpsvga: lodsb |
| 1209 | orb %al, %al |
| 1210 | jz didsv |
| 1211 | |
| 1212 | stosw |
| 1213 | movsw |
| 1214 | jmp cpsvga |
| 1215 | |
| 1216 | didsv: movw %si, card_name # Store pointer to card name |
| 1217 | didsv1: ret |
| 1218 | |
| 1219 | # Table of all known SVGA cards. For each card, we store a pointer to |
| 1220 | # a table of video modes supported by the card and a pointer to a routine |
| 1221 | # used for testing of presence of the card. The video mode table is always |
| 1222 | # followed by the name of the card or the chipset. |
| 1223 | svga_table: |
| 1224 | .word ati_md, ati_test |
| 1225 | .word oak_md, oak_test |
| 1226 | .word paradise_md, paradise_test |
| 1227 | .word realtek_md, realtek_test |
| 1228 | .word s3_md, s3_test |
| 1229 | .word chips_md, chips_test |
| 1230 | .word video7_md, video7_test |
| 1231 | .word cirrus5_md, cirrus5_test |
| 1232 | .word cirrus6_md, cirrus6_test |
| 1233 | .word cirrus1_md, cirrus1_test |
| 1234 | .word ahead_md, ahead_test |
| 1235 | .word everex_md, everex_test |
| 1236 | .word genoa_md, genoa_test |
| 1237 | .word trident_md, trident_test |
| 1238 | .word tseng_md, tseng_test |
| 1239 | .word 0 |
| 1240 | |
| 1241 | # Test routines and mode tables: |
| 1242 | |
| 1243 | # S3 - The test algorithm was taken from the SuperProbe package |
| 1244 | # for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org |
| 1245 | s3_test: |
| 1246 | movw $0x0f35, %cx # we store some constants in cl/ch |
| 1247 | movw $0x03d4, %dx |
| 1248 | movb $0x38, %al |
| 1249 | call inidx |
| 1250 | movb %al, %bh # store current CRT-register 0x38 |
| 1251 | movw $0x0038, %ax |
| 1252 | call outidx # disable writing to special regs |
| 1253 | movb %cl, %al # check whether we can write special reg 0x35 |
| 1254 | call inidx |
| 1255 | movb %al, %bl # save the current value of CRT reg 0x35 |
| 1256 | andb $0xf0, %al # clear bits 0-3 |
| 1257 | movb %al, %ah |
| 1258 | movb %cl, %al # and write it to CRT reg 0x35 |
| 1259 | call outidx |
| 1260 | call inidx # now read it back |
| 1261 | andb %ch, %al # clear the upper 4 bits |
| 1262 | jz s3_2 # the first test failed. But we have a |
| 1263 | |
| 1264 | movb %bl, %ah # second chance |
| 1265 | movb %cl, %al |
| 1266 | call outidx |
| 1267 | jmp s3_1 # do the other tests |
| 1268 | |
| 1269 | s3_2: movw %cx, %ax # load ah with 0xf and al with 0x35 |
| 1270 | orb %bl, %ah # set the upper 4 bits of ah with the orig value |
| 1271 | call outidx # write ... |
| 1272 | call inidx # ... and reread |
| 1273 | andb %cl, %al # turn off the upper 4 bits |
| 1274 | pushw %ax |
| 1275 | movb %bl, %ah # restore old value in register 0x35 |
| 1276 | movb %cl, %al |
| 1277 | call outidx |
| 1278 | popw %ax |
| 1279 | cmpb %ch, %al # setting lower 4 bits was successful => bad |
| 1280 | je no_s3 # writing is allowed => this is not an S3 |
| 1281 | |
| 1282 | s3_1: movw $0x4838, %ax # allow writing to special regs by putting |
| 1283 | call outidx # magic number into CRT-register 0x38 |
| 1284 | movb %cl, %al # check whether we can write special reg 0x35 |
| 1285 | call inidx |
| 1286 | movb %al, %bl |
| 1287 | andb $0xf0, %al |
| 1288 | movb %al, %ah |
| 1289 | movb %cl, %al |
| 1290 | call outidx |
| 1291 | call inidx |
| 1292 | andb %ch, %al |
| 1293 | jnz no_s3 # no, we can't write => no S3 |
| 1294 | |
| 1295 | movw %cx, %ax |
| 1296 | orb %bl, %ah |
| 1297 | call outidx |
| 1298 | call inidx |
| 1299 | andb %ch, %al |
| 1300 | pushw %ax |
| 1301 | movb %bl, %ah # restore old value in register 0x35 |
| 1302 | movb %cl, %al |
| 1303 | call outidx |
| 1304 | popw %ax |
| 1305 | cmpb %ch, %al |
| 1306 | jne no_s31 # writing not possible => no S3 |
| 1307 | movb $0x30, %al |
| 1308 | call inidx # now get the S3 id ... |
| 1309 | leaw idS3, %di |
| 1310 | movw $0x10, %cx |
| 1311 | repne |
| 1312 | scasb |
| 1313 | je no_s31 |
| 1314 | |
| 1315 | movb %bh, %ah |
| 1316 | movb $0x38, %al |
| 1317 | jmp s3rest |
| 1318 | |
| 1319 | no_s3: movb $0x35, %al # restore CRT register 0x35 |
| 1320 | movb %bl, %ah |
| 1321 | call outidx |
| 1322 | no_s31: xorw %bp, %bp # Detection failed |
| 1323 | s3rest: movb %bh, %ah |
| 1324 | movb $0x38, %al # restore old value of CRT register 0x38 |
| 1325 | jmp outidx |
| 1326 | |
| 1327 | idS3: .byte 0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95 |
| 1328 | .byte 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0 |
| 1329 | |
| 1330 | s3_md: .byte 0x54, 0x2b, 0x84 |
| 1331 | .byte 0x55, 0x19, 0x84 |
| 1332 | .byte 0 |
| 1333 | .ascii "S3" |
| 1334 | .byte 0 |
| 1335 | |
| 1336 | # ATI cards. |
| 1337 | ati_test: |
| 1338 | leaw idati, %si |
| 1339 | movw $0x31, %di |
| 1340 | movw $0x09, %cx |
| 1341 | repe |
| 1342 | cmpsb |
| 1343 | je atiok |
| 1344 | |
| 1345 | xorw %bp, %bp |
| 1346 | atiok: ret |
| 1347 | |
| 1348 | idati: .ascii "761295520" |
| 1349 | |
| 1350 | ati_md: .byte 0x23, 0x19, 0x84 |
| 1351 | .byte 0x33, 0x2c, 0x84 |
| 1352 | .byte 0x22, 0x1e, 0x64 |
| 1353 | .byte 0x21, 0x19, 0x64 |
| 1354 | .byte 0x58, 0x21, 0x50 |
| 1355 | .byte 0x5b, 0x1e, 0x50 |
| 1356 | .byte 0 |
| 1357 | .ascii "ATI" |
| 1358 | .byte 0 |
| 1359 | |
| 1360 | # AHEAD |
| 1361 | ahead_test: |
| 1362 | movw $0x200f, %ax |
| 1363 | movw $0x3ce, %dx |
| 1364 | outw %ax, %dx |
| 1365 | incw %dx |
| 1366 | inb %dx, %al |
| 1367 | cmpb $0x20, %al |
| 1368 | je isahed |
| 1369 | |
| 1370 | cmpb $0x21, %al |
| 1371 | je isahed |
| 1372 | |
| 1373 | xorw %bp, %bp |
| 1374 | isahed: ret |
| 1375 | |
| 1376 | ahead_md: |
| 1377 | .byte 0x22, 0x2c, 0x84 |
| 1378 | .byte 0x23, 0x19, 0x84 |
| 1379 | .byte 0x24, 0x1c, 0x84 |
| 1380 | .byte 0x2f, 0x32, 0xa0 |
| 1381 | .byte 0x32, 0x22, 0x50 |
| 1382 | .byte 0x34, 0x42, 0x50 |
| 1383 | .byte 0 |
| 1384 | .ascii "Ahead" |
| 1385 | .byte 0 |
| 1386 | |
| 1387 | # Chips & Tech. |
| 1388 | chips_test: |
| 1389 | movw $0x3c3, %dx |
| 1390 | inb %dx, %al |
| 1391 | orb $0x10, %al |
| 1392 | outb %al, %dx |
| 1393 | movw $0x104, %dx |
| 1394 | inb %dx, %al |
| 1395 | movb %al, %bl |
| 1396 | movw $0x3c3, %dx |
| 1397 | inb %dx, %al |
| 1398 | andb $0xef, %al |
| 1399 | outb %al, %dx |
| 1400 | cmpb $0xa5, %bl |
| 1401 | je cantok |
| 1402 | |
| 1403 | xorw %bp, %bp |
| 1404 | cantok: ret |
| 1405 | |
| 1406 | chips_md: |
| 1407 | .byte 0x60, 0x19, 0x84 |
| 1408 | .byte 0x61, 0x32, 0x84 |
| 1409 | .byte 0 |
| 1410 | .ascii "Chips & Technologies" |
| 1411 | .byte 0 |
| 1412 | |
| 1413 | # Cirrus Logic 5X0 |
| 1414 | cirrus1_test: |
| 1415 | movw $0x3d4, %dx |
| 1416 | movb $0x0c, %al |
| 1417 | outb %al, %dx |
| 1418 | incw %dx |
| 1419 | inb %dx, %al |
| 1420 | movb %al, %bl |
| 1421 | xorb %al, %al |
| 1422 | outb %al, %dx |
| 1423 | decw %dx |
| 1424 | movb $0x1f, %al |
| 1425 | outb %al, %dx |
| 1426 | incw %dx |
| 1427 | inb %dx, %al |
| 1428 | movb %al, %bh |
| 1429 | xorb %ah, %ah |
| 1430 | shlb $4, %al |
| 1431 | movw %ax, %cx |
| 1432 | movb %bh, %al |
| 1433 | shrb $4, %al |
| 1434 | addw %ax, %cx |
| 1435 | shlw $8, %cx |
| 1436 | addw $6, %cx |
| 1437 | movw %cx, %ax |
| 1438 | movw $0x3c4, %dx |
| 1439 | outw %ax, %dx |
| 1440 | incw %dx |
| 1441 | inb %dx, %al |
| 1442 | andb %al, %al |
| 1443 | jnz nocirr |
| 1444 | |
| 1445 | movb %bh, %al |
| 1446 | outb %al, %dx |
| 1447 | inb %dx, %al |
| 1448 | cmpb $0x01, %al |
| 1449 | je iscirr |
| 1450 | |
| 1451 | nocirr: xorw %bp, %bp |
| 1452 | iscirr: movw $0x3d4, %dx |
| 1453 | movb %bl, %al |
| 1454 | xorb %ah, %ah |
| 1455 | shlw $8, %ax |
| 1456 | addw $0x0c, %ax |
| 1457 | outw %ax, %dx |
| 1458 | ret |
| 1459 | |
| 1460 | cirrus1_md: |
| 1461 | .byte 0x1f, 0x19, 0x84 |
| 1462 | .byte 0x20, 0x2c, 0x84 |
| 1463 | .byte 0x22, 0x1e, 0x84 |
| 1464 | .byte 0x31, 0x25, 0x64 |
| 1465 | .byte 0 |
| 1466 | .ascii "Cirrus Logic 5X0" |
| 1467 | .byte 0 |
| 1468 | |
| 1469 | # Cirrus Logic 54XX |
| 1470 | cirrus5_test: |
| 1471 | movw $0x3c4, %dx |
| 1472 | movb $6, %al |
| 1473 | call inidx |
| 1474 | movb %al, %bl # BL=backup |
| 1475 | movw $6, %ax |
| 1476 | call tstidx |
| 1477 | cmpb $0x0f, %al |
| 1478 | jne c5fail |
| 1479 | |
| 1480 | movw $0x1206, %ax |
| 1481 | call tstidx |
| 1482 | cmpb $0x12, %al |
| 1483 | jne c5fail |
| 1484 | |
| 1485 | movb $0x1e, %al |
| 1486 | call inidx |
| 1487 | movb %al, %bh |
| 1488 | movb %bh, %ah |
| 1489 | andb $0xc0, %ah |
| 1490 | movb $0x1e, %al |
| 1491 | call tstidx |
| 1492 | andb $0x3f, %al |
| 1493 | jne c5xx |
| 1494 | |
| 1495 | movb $0x1e, %al |
| 1496 | movb %bh, %ah |
| 1497 | orb $0x3f, %ah |
| 1498 | call tstidx |
| 1499 | xorb $0x3f, %al |
| 1500 | andb $0x3f, %al |
| 1501 | c5xx: pushf |
| 1502 | movb $0x1e, %al |
| 1503 | movb %bh, %ah |
| 1504 | outw %ax, %dx |
| 1505 | popf |
| 1506 | je c5done |
| 1507 | |
| 1508 | c5fail: xorw %bp, %bp |
| 1509 | c5done: movb $6, %al |
| 1510 | movb %bl, %ah |
| 1511 | outw %ax, %dx |
| 1512 | ret |
| 1513 | |
| 1514 | cirrus5_md: |
| 1515 | .byte 0x14, 0x19, 0x84 |
| 1516 | .byte 0x54, 0x2b, 0x84 |
| 1517 | .byte 0 |
| 1518 | .ascii "Cirrus Logic 54XX" |
| 1519 | .byte 0 |
| 1520 | |
| 1521 | # Cirrus Logic 64XX -- no known extra modes, but must be identified, because |
| 1522 | # it's misidentified by the Ahead test. |
| 1523 | cirrus6_test: |
| 1524 | movw $0x3ce, %dx |
| 1525 | movb $0x0a, %al |
| 1526 | call inidx |
| 1527 | movb %al, %bl # BL=backup |
| 1528 | movw $0xce0a, %ax |
| 1529 | call tstidx |
| 1530 | orb %al, %al |
| 1531 | jne c2fail |
| 1532 | |
| 1533 | movw $0xec0a, %ax |
| 1534 | call tstidx |
| 1535 | cmpb $0x01, %al |
| 1536 | jne c2fail |
| 1537 | |
| 1538 | movb $0xaa, %al |
| 1539 | call inidx # 4X, 5X, 7X and 8X are valid 64XX chip ID's. |
| 1540 | shrb $4, %al |
| 1541 | subb $4, %al |
| 1542 | jz c6done |
| 1543 | |
| 1544 | decb %al |
| 1545 | jz c6done |
| 1546 | |
| 1547 | subb $2, %al |
| 1548 | jz c6done |
| 1549 | |
| 1550 | decb %al |
| 1551 | jz c6done |
| 1552 | |
| 1553 | c2fail: xorw %bp, %bp |
| 1554 | c6done: movb $0x0a, %al |
| 1555 | movb %bl, %ah |
| 1556 | outw %ax, %dx |
| 1557 | ret |
| 1558 | |
| 1559 | cirrus6_md: |
| 1560 | .byte 0 |
| 1561 | .ascii "Cirrus Logic 64XX" |
| 1562 | .byte 0 |
| 1563 | |
| 1564 | # Everex / Trident |
| 1565 | everex_test: |
| 1566 | movw $0x7000, %ax |
| 1567 | xorw %bx, %bx |
| 1568 | int $0x10 |
| 1569 | cmpb $0x70, %al |
| 1570 | jne noevrx |
| 1571 | |
| 1572 | shrw $4, %dx |
| 1573 | cmpw $0x678, %dx |
| 1574 | je evtrid |
| 1575 | |
| 1576 | cmpw $0x236, %dx |
| 1577 | jne evrxok |
| 1578 | |
| 1579 | evtrid: leaw trident_md, %bp |
| 1580 | evrxok: ret |
| 1581 | |
| 1582 | noevrx: xorw %bp, %bp |
| 1583 | ret |
| 1584 | |
| 1585 | everex_md: |
| 1586 | .byte 0x03, 0x22, 0x50 |
| 1587 | .byte 0x04, 0x3c, 0x50 |
| 1588 | .byte 0x07, 0x2b, 0x64 |
| 1589 | .byte 0x08, 0x4b, 0x64 |
| 1590 | .byte 0x0a, 0x19, 0x84 |
| 1591 | .byte 0x0b, 0x2c, 0x84 |
| 1592 | .byte 0x16, 0x1e, 0x50 |
| 1593 | .byte 0x18, 0x1b, 0x64 |
| 1594 | .byte 0x21, 0x40, 0xa0 |
| 1595 | .byte 0x40, 0x1e, 0x84 |
| 1596 | .byte 0 |
| 1597 | .ascii "Everex/Trident" |
| 1598 | .byte 0 |
| 1599 | |
| 1600 | # Genoa. |
| 1601 | genoa_test: |
| 1602 | leaw idgenoa, %si # Check Genoa 'clues' |
| 1603 | xorw %ax, %ax |
| 1604 | movb %es:(0x37), %al |
| 1605 | movw %ax, %di |
| 1606 | movw $0x04, %cx |
| 1607 | decw %si |
| 1608 | decw %di |
| 1609 | l1: incw %si |
| 1610 | incw %di |
| 1611 | movb (%si), %al |
| 1612 | testb %al, %al |
| 1613 | jz l2 |
| 1614 | |
| 1615 | cmpb %es:(%di), %al |
| 1616 | l2: loope l1 |
| 1617 | orw %cx, %cx |
| 1618 | je isgen |
| 1619 | |
| 1620 | xorw %bp, %bp |
| 1621 | isgen: ret |
| 1622 | |
| 1623 | idgenoa: .byte 0x77, 0x00, 0x99, 0x66 |
| 1624 | |
| 1625 | genoa_md: |
| 1626 | .byte 0x58, 0x20, 0x50 |
| 1627 | .byte 0x5a, 0x2a, 0x64 |
| 1628 | .byte 0x60, 0x19, 0x84 |
| 1629 | .byte 0x61, 0x1d, 0x84 |
| 1630 | .byte 0x62, 0x20, 0x84 |
| 1631 | .byte 0x63, 0x2c, 0x84 |
| 1632 | .byte 0x64, 0x3c, 0x84 |
| 1633 | .byte 0x6b, 0x4f, 0x64 |
| 1634 | .byte 0x72, 0x3c, 0x50 |
| 1635 | .byte 0x74, 0x42, 0x50 |
| 1636 | .byte 0x78, 0x4b, 0x64 |
| 1637 | .byte 0 |
| 1638 | .ascii "Genoa" |
| 1639 | .byte 0 |
| 1640 | |
| 1641 | # OAK |
| 1642 | oak_test: |
| 1643 | leaw idoakvga, %si |
| 1644 | movw $0x08, %di |
| 1645 | movw $0x08, %cx |
| 1646 | repe |
| 1647 | cmpsb |
| 1648 | je isoak |
| 1649 | |
| 1650 | xorw %bp, %bp |
| 1651 | isoak: ret |
| 1652 | |
| 1653 | idoakvga: .ascii "OAK VGA " |
| 1654 | |
| 1655 | oak_md: .byte 0x4e, 0x3c, 0x50 |
| 1656 | .byte 0x4f, 0x3c, 0x84 |
| 1657 | .byte 0x50, 0x19, 0x84 |
| 1658 | .byte 0x51, 0x2b, 0x84 |
| 1659 | .byte 0 |
| 1660 | .ascii "OAK" |
| 1661 | .byte 0 |
| 1662 | |
| 1663 | # WD Paradise. |
| 1664 | paradise_test: |
| 1665 | leaw idparadise, %si |
| 1666 | movw $0x7d, %di |
| 1667 | movw $0x04, %cx |
| 1668 | repe |
| 1669 | cmpsb |
| 1670 | je ispara |
| 1671 | |
| 1672 | xorw %bp, %bp |
| 1673 | ispara: ret |
| 1674 | |
| 1675 | idparadise: .ascii "VGA=" |
| 1676 | |
| 1677 | paradise_md: |
| 1678 | .byte 0x41, 0x22, 0x50 |
| 1679 | .byte 0x47, 0x1c, 0x84 |
| 1680 | .byte 0x55, 0x19, 0x84 |
| 1681 | .byte 0x54, 0x2c, 0x84 |
| 1682 | .byte 0 |
| 1683 | .ascii "Paradise" |
| 1684 | .byte 0 |
| 1685 | |
| 1686 | # Trident. |
| 1687 | trident_test: |
| 1688 | movw $0x3c4, %dx |
| 1689 | movb $0x0e, %al |
| 1690 | outb %al, %dx |
| 1691 | incw %dx |
| 1692 | inb %dx, %al |
| 1693 | xchgb %al, %ah |
| 1694 | xorb %al, %al |
| 1695 | outb %al, %dx |
| 1696 | inb %dx, %al |
| 1697 | xchgb %ah, %al |
| 1698 | movb %al, %bl # Strange thing ... in the book this wasn't |
| 1699 | andb $0x02, %bl # necessary but it worked on my card which |
| 1700 | jz setb2 # is a trident. Without it the screen goes |
| 1701 | # blurred ... |
| 1702 | andb $0xfd, %al |
| 1703 | jmp clrb2 |
| 1704 | |
| 1705 | setb2: orb $0x02, %al |
| 1706 | clrb2: outb %al, %dx |
| 1707 | andb $0x0f, %ah |
| 1708 | cmpb $0x02, %ah |
| 1709 | je istrid |
| 1710 | |
| 1711 | xorw %bp, %bp |
| 1712 | istrid: ret |
| 1713 | |
| 1714 | trident_md: |
| 1715 | .byte 0x50, 0x1e, 0x50 |
| 1716 | .byte 0x51, 0x2b, 0x50 |
| 1717 | .byte 0x52, 0x3c, 0x50 |
| 1718 | .byte 0x57, 0x19, 0x84 |
| 1719 | .byte 0x58, 0x1e, 0x84 |
| 1720 | .byte 0x59, 0x2b, 0x84 |
| 1721 | .byte 0x5a, 0x3c, 0x84 |
| 1722 | .byte 0 |
| 1723 | .ascii "Trident" |
| 1724 | .byte 0 |
| 1725 | |
| 1726 | # Tseng. |
| 1727 | tseng_test: |
| 1728 | movw $0x3cd, %dx |
| 1729 | inb %dx, %al # Could things be this simple ! :-) |
| 1730 | movb %al, %bl |
| 1731 | movb $0x55, %al |
| 1732 | outb %al, %dx |
| 1733 | inb %dx, %al |
| 1734 | movb %al, %ah |
| 1735 | movb %bl, %al |
| 1736 | outb %al, %dx |
| 1737 | cmpb $0x55, %ah |
| 1738 | je istsen |
| 1739 | |
| 1740 | isnot: xorw %bp, %bp |
| 1741 | istsen: ret |
| 1742 | |
| 1743 | tseng_md: |
| 1744 | .byte 0x26, 0x3c, 0x50 |
| 1745 | .byte 0x2a, 0x28, 0x64 |
| 1746 | .byte 0x23, 0x19, 0x84 |
| 1747 | .byte 0x24, 0x1c, 0x84 |
| 1748 | .byte 0x22, 0x2c, 0x84 |
| 1749 | .byte 0x21, 0x3c, 0x84 |
| 1750 | .byte 0 |
| 1751 | .ascii "Tseng" |
| 1752 | .byte 0 |
| 1753 | |
| 1754 | # Video7. |
| 1755 | video7_test: |
| 1756 | movw $0x3cc, %dx |
| 1757 | inb %dx, %al |
| 1758 | movw $0x3b4, %dx |
| 1759 | andb $0x01, %al |
| 1760 | jz even7 |
| 1761 | |
| 1762 | movw $0x3d4, %dx |
| 1763 | even7: movb $0x0c, %al |
| 1764 | outb %al, %dx |
| 1765 | incw %dx |
| 1766 | inb %dx, %al |
| 1767 | movb %al, %bl |
| 1768 | movb $0x55, %al |
| 1769 | outb %al, %dx |
| 1770 | inb %dx, %al |
| 1771 | decw %dx |
| 1772 | movb $0x1f, %al |
| 1773 | outb %al, %dx |
| 1774 | incw %dx |
| 1775 | inb %dx, %al |
| 1776 | movb %al, %bh |
| 1777 | decw %dx |
| 1778 | movb $0x0c, %al |
| 1779 | outb %al, %dx |
| 1780 | incw %dx |
| 1781 | movb %bl, %al |
| 1782 | outb %al, %dx |
| 1783 | movb $0x55, %al |
| 1784 | xorb $0xea, %al |
| 1785 | cmpb %bh, %al |
| 1786 | jne isnot |
| 1787 | |
| 1788 | movb $VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching |
| 1789 | ret |
| 1790 | |
| 1791 | video7_md: |
| 1792 | .byte 0x40, 0x2b, 0x50 |
| 1793 | .byte 0x43, 0x3c, 0x50 |
| 1794 | .byte 0x44, 0x3c, 0x64 |
| 1795 | .byte 0x41, 0x19, 0x84 |
| 1796 | .byte 0x42, 0x2c, 0x84 |
| 1797 | .byte 0x45, 0x1c, 0x84 |
| 1798 | .byte 0 |
| 1799 | .ascii "Video 7" |
| 1800 | .byte 0 |
| 1801 | |
| 1802 | # Realtek VGA |
| 1803 | realtek_test: |
| 1804 | leaw idrtvga, %si |
| 1805 | movw $0x45, %di |
| 1806 | movw $0x0b, %cx |
| 1807 | repe |
| 1808 | cmpsb |
| 1809 | je isrt |
| 1810 | |
| 1811 | xorw %bp, %bp |
| 1812 | isrt: ret |
| 1813 | |
| 1814 | idrtvga: .ascii "REALTEK VGA" |
| 1815 | |
| 1816 | realtek_md: |
| 1817 | .byte 0x1a, 0x3c, 0x50 |
| 1818 | .byte 0x1b, 0x19, 0x84 |
| 1819 | .byte 0x1c, 0x1e, 0x84 |
| 1820 | .byte 0x1d, 0x2b, 0x84 |
| 1821 | .byte 0x1e, 0x3c, 0x84 |
| 1822 | .byte 0 |
| 1823 | .ascii "REALTEK" |
| 1824 | .byte 0 |
| 1825 | |
| 1826 | #endif /* CONFIG_VIDEO_SVGA */ |
| 1827 | |
| 1828 | # User-defined local mode table (VGA only) |
| 1829 | #ifdef CONFIG_VIDEO_LOCAL |
| 1830 | local_modes: |
| 1831 | leaw local_mode_table, %si |
| 1832 | locm1: lodsw |
| 1833 | orw %ax, %ax |
| 1834 | jz locm2 |
| 1835 | |
| 1836 | stosw |
| 1837 | movsw |
| 1838 | jmp locm1 |
| 1839 | |
| 1840 | locm2: ret |
| 1841 | |
| 1842 | # This is the table of local video modes which can be supplied manually |
| 1843 | # by the user. Each entry consists of mode ID (word) and dimensions |
| 1844 | # (byte for column count and another byte for row count). These modes |
| 1845 | # are placed before all SVGA and VESA modes and override them if table |
| 1846 | # compacting is enabled. The table must end with a zero word followed |
| 1847 | # by NUL-terminated video adapter name. |
| 1848 | local_mode_table: |
| 1849 | .word 0x0100 # Example: 40x25 |
| 1850 | .byte 25,40 |
| 1851 | .word 0 |
| 1852 | .ascii "Local" |
| 1853 | .byte 0 |
| 1854 | #endif /* CONFIG_VIDEO_LOCAL */ |
| 1855 | |
| 1856 | # Read a key and return the ASCII code in al, scan code in ah |
| 1857 | getkey: xorb %ah, %ah |
| 1858 | int $0x16 |
| 1859 | ret |
| 1860 | |
| 1861 | # Read a key with a timeout of 30 seconds. |
| 1862 | # The hardware clock is used to get the time. |
| 1863 | getkt: call gettime |
| 1864 | addb $30, %al # Wait 30 seconds |
| 1865 | cmpb $60, %al |
| 1866 | jl lminute |
| 1867 | |
| 1868 | subb $60, %al |
| 1869 | lminute: |
| 1870 | movb %al, %cl |
| 1871 | again: movb $0x01, %ah |
| 1872 | int $0x16 |
| 1873 | jnz getkey # key pressed, so get it |
| 1874 | |
| 1875 | call gettime |
| 1876 | cmpb %cl, %al |
| 1877 | jne again |
| 1878 | |
| 1879 | movb $0x20, %al # timeout, return `space' |
| 1880 | ret |
| 1881 | |
| 1882 | # Flush the keyboard buffer |
| 1883 | flush: movb $0x01, %ah |
| 1884 | int $0x16 |
| 1885 | jz empty |
| 1886 | |
| 1887 | xorb %ah, %ah |
| 1888 | int $0x16 |
| 1889 | jmp flush |
| 1890 | |
| 1891 | empty: ret |
| 1892 | |
| 1893 | # Print hexadecimal number. |
| 1894 | prthw: pushw %ax |
| 1895 | movb %ah, %al |
| 1896 | call prthb |
| 1897 | popw %ax |
| 1898 | prthb: pushw %ax |
| 1899 | shrb $4, %al |
| 1900 | call prthn |
| 1901 | popw %ax |
| 1902 | andb $0x0f, %al |
| 1903 | prthn: cmpb $0x0a, %al |
| 1904 | jc prth1 |
| 1905 | |
| 1906 | addb $0x07, %al |
| 1907 | prth1: addb $0x30, %al |
| 1908 | jmp prtchr |
| 1909 | |
| 1910 | # Print decimal number in al |
| 1911 | prtdec: pushw %ax |
| 1912 | pushw %cx |
| 1913 | xorb %ah, %ah |
| 1914 | movb $0x0a, %cl |
| 1915 | idivb %cl |
| 1916 | cmpb $0x09, %al |
| 1917 | jbe lt100 |
| 1918 | |
| 1919 | call prtdec |
| 1920 | jmp skip10 |
| 1921 | |
| 1922 | lt100: addb $0x30, %al |
| 1923 | call prtchr |
| 1924 | skip10: movb %ah, %al |
| 1925 | addb $0x30, %al |
| 1926 | call prtchr |
| 1927 | popw %cx |
| 1928 | popw %ax |
| 1929 | ret |
| 1930 | |
| 1931 | store_edid: |
Antonino A. Daplas | 59153f7 | 2006-03-27 01:17:29 -0800 | [diff] [blame] | 1932 | #ifdef CONFIG_FB_FIRMWARE_EDID |
Domen Puncer | 125947f | 2005-05-05 16:16:15 -0700 | [diff] [blame] | 1933 | pushw %es # just save all registers |
| 1934 | pushw %ax |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1935 | pushw %bx |
| 1936 | pushw %cx |
| 1937 | pushw %dx |
| 1938 | pushw %di |
| 1939 | |
Domen Puncer | 125947f | 2005-05-05 16:16:15 -0700 | [diff] [blame] | 1940 | pushw %fs |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1941 | popw %es |
| 1942 | |
| 1943 | movl $0x13131313, %eax # memset block with 0x13 |
| 1944 | movw $32, %cx |
| 1945 | movw $0x140, %di |
| 1946 | cld |
Domen Puncer | 125947f | 2005-05-05 16:16:15 -0700 | [diff] [blame] | 1947 | rep |
| 1948 | stosl |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1949 | |
Domen Puncer | 125947f | 2005-05-05 16:16:15 -0700 | [diff] [blame] | 1950 | movw $0x4f15, %ax # do VBE/DDC |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1951 | movw $0x01, %bx |
| 1952 | movw $0x00, %cx |
Antonino A. Daplas | 5e518d7 | 2005-09-09 13:04:34 -0700 | [diff] [blame] | 1953 | movw $0x00, %dx |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1954 | movw $0x140, %di |
Domen Puncer | 125947f | 2005-05-05 16:16:15 -0700 | [diff] [blame] | 1955 | int $0x10 |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1956 | |
Domen Puncer | 125947f | 2005-05-05 16:16:15 -0700 | [diff] [blame] | 1957 | popw %di # restore all registers |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1958 | popw %dx |
| 1959 | popw %cx |
| 1960 | popw %bx |
| 1961 | popw %ax |
Domen Puncer | 125947f | 2005-05-05 16:16:15 -0700 | [diff] [blame] | 1962 | popw %es |
Antonino A. Daplas | 59153f7 | 2006-03-27 01:17:29 -0800 | [diff] [blame] | 1963 | #endif |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1964 | ret |
| 1965 | |
| 1966 | # VIDEO_SELECT-only variables |
| 1967 | mt_end: .word 0 # End of video mode table if built |
| 1968 | edit_buf: .space 6 # Line editor buffer |
| 1969 | card_name: .word 0 # Pointer to adapter name |
| 1970 | scanning: .byte 0 # Performing mode scan |
| 1971 | do_restore: .byte 0 # Screen contents altered during mode change |
| 1972 | svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes |
| 1973 | graphic_mode: .byte 0 # Graphic mode with a linear frame buffer |
| 1974 | dac_size: .byte 6 # DAC bit depth |
| 1975 | |
| 1976 | # Status messages |
| 1977 | keymsg: .ascii "Press <RETURN> to see video modes available, " |
| 1978 | .ascii "<SPACE> to continue or wait 30 secs" |
| 1979 | .byte 0x0d, 0x0a, 0 |
| 1980 | |
| 1981 | listhdr: .byte 0x0d, 0x0a |
| 1982 | .ascii "Mode: COLSxROWS:" |
| 1983 | |
| 1984 | crlft: .byte 0x0d, 0x0a, 0 |
| 1985 | |
| 1986 | prompt: .byte 0x0d, 0x0a |
| 1987 | .asciz "Enter mode number or `scan': " |
| 1988 | |
| 1989 | unknt: .asciz "Unknown mode ID. Try again." |
| 1990 | |
| 1991 | badmdt: .ascii "You passed an undefined mode number." |
| 1992 | .byte 0x0d, 0x0a, 0 |
| 1993 | |
| 1994 | vesaer: .ascii "Error: Scanning of VESA modes failed. Please " |
| 1995 | .ascii "report to <mj@ucw.cz>." |
| 1996 | .byte 0x0d, 0x0a, 0 |
| 1997 | |
| 1998 | old_name: .asciz "CGA/MDA/HGA" |
| 1999 | |
| 2000 | ega_name: .asciz "EGA" |
| 2001 | |
| 2002 | svga_name: .ascii " " |
| 2003 | |
| 2004 | vga_name: .asciz "VGA" |
| 2005 | |
| 2006 | vesa_name: .asciz "VESA" |
| 2007 | |
| 2008 | name_bann: .asciz "Video adapter: " |
| 2009 | #endif /* CONFIG_VIDEO_SELECT */ |
| 2010 | |
| 2011 | # Other variables: |
| 2012 | adapter: .byte 0 # Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA |
| 2013 | video_segment: .word 0xb800 # Video memory segment |
| 2014 | force_size: .word 0 # Use this size instead of the one in BIOS vars |