Eugene Surovegin | 37448f7 | 2005-10-10 16:58:14 -0700 | [diff] [blame] | 1 | /* |
| 2 | * drivers/net/ibm_emac/ibm_emac_zmii.c |
| 3 | * |
| 4 | * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. |
| 5 | * |
| 6 | * Copyright (c) 2004, 2005 Zultys Technologies. |
| 7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> |
| 8 | * |
| 9 | * Based on original work by |
| 10 | * Armin Kuster <akuster@mvista.com> |
| 11 | * Copyright 2001 MontaVista Softare Inc. |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify it |
| 14 | * under the terms of the GNU General Public License as published by the |
| 15 | * Free Software Foundation; either version 2 of the License, or (at your |
| 16 | * option) any later version. |
| 17 | * |
| 18 | */ |
| 19 | #include <linux/config.h> |
| 20 | #include <linux/kernel.h> |
| 21 | #include <linux/ethtool.h> |
| 22 | #include <asm/io.h> |
| 23 | |
| 24 | #include "ibm_emac_core.h" |
| 25 | #include "ibm_emac_debug.h" |
| 26 | |
| 27 | /* ZMIIx_FER */ |
| 28 | #define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4)) |
| 29 | #define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \ |
| 30 | ZMII_FER_MDI(2) | ZMII_FER_MDI(3)) |
| 31 | |
| 32 | #define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4)) |
| 33 | #define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4)) |
| 34 | #define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4)) |
| 35 | |
| 36 | /* ZMIIx_SSR */ |
| 37 | #define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4)) |
| 38 | #define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4)) |
| 39 | #define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4)) |
| 40 | |
| 41 | /* ZMII only supports MII, RMII and SMII |
| 42 | * we also support autodetection for backward compatibility |
| 43 | */ |
| 44 | static inline int zmii_valid_mode(int mode) |
| 45 | { |
| 46 | return mode == PHY_MODE_MII || |
| 47 | mode == PHY_MODE_RMII || |
| 48 | mode == PHY_MODE_SMII || |
| 49 | mode == PHY_MODE_NA; |
| 50 | } |
| 51 | |
| 52 | static inline const char *zmii_mode_name(int mode) |
| 53 | { |
| 54 | switch (mode) { |
| 55 | case PHY_MODE_MII: |
| 56 | return "MII"; |
| 57 | case PHY_MODE_RMII: |
| 58 | return "RMII"; |
| 59 | case PHY_MODE_SMII: |
| 60 | return "SMII"; |
| 61 | default: |
| 62 | BUG(); |
| 63 | } |
| 64 | } |
| 65 | |
| 66 | static inline u32 zmii_mode_mask(int mode, int input) |
| 67 | { |
| 68 | switch (mode) { |
| 69 | case PHY_MODE_MII: |
| 70 | return ZMII_FER_MII(input); |
| 71 | case PHY_MODE_RMII: |
| 72 | return ZMII_FER_RMII(input); |
| 73 | case PHY_MODE_SMII: |
| 74 | return ZMII_FER_SMII(input); |
| 75 | default: |
| 76 | return 0; |
| 77 | } |
| 78 | } |
| 79 | |
| 80 | static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode) |
| 81 | { |
| 82 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); |
Al Viro | b43de2d | 2005-12-01 10:15:21 -0500 | [diff] [blame] | 83 | struct zmii_regs __iomem *p; |
Eugene Surovegin | 37448f7 | 2005-10-10 16:58:14 -0700 | [diff] [blame] | 84 | |
| 85 | ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode); |
| 86 | |
| 87 | if (!dev) { |
| 88 | dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL); |
| 89 | if (!dev) { |
| 90 | printk(KERN_ERR |
| 91 | "zmii%d: couldn't allocate device structure!\n", |
| 92 | ocpdev->def->index); |
| 93 | return -ENOMEM; |
| 94 | } |
| 95 | dev->mode = PHY_MODE_NA; |
| 96 | |
Al Viro | b43de2d | 2005-12-01 10:15:21 -0500 | [diff] [blame] | 97 | p = ioremap(ocpdev->def->paddr, sizeof(struct zmii_regs)); |
Eugene Surovegin | 37448f7 | 2005-10-10 16:58:14 -0700 | [diff] [blame] | 98 | if (!p) { |
| 99 | printk(KERN_ERR |
| 100 | "zmii%d: could not ioremap device registers!\n", |
| 101 | ocpdev->def->index); |
| 102 | kfree(dev); |
| 103 | return -ENOMEM; |
| 104 | } |
| 105 | dev->base = p; |
| 106 | ocp_set_drvdata(ocpdev, dev); |
| 107 | |
| 108 | /* We may need FER value for autodetection later */ |
| 109 | dev->fer_save = in_be32(&p->fer); |
| 110 | |
| 111 | /* Disable all inputs by default */ |
| 112 | out_be32(&p->fer, 0); |
| 113 | } else |
| 114 | p = dev->base; |
| 115 | |
| 116 | if (!zmii_valid_mode(*mode)) { |
| 117 | /* Probably an EMAC connected to RGMII, |
| 118 | * but it still may need ZMII for MDIO |
| 119 | */ |
| 120 | goto out; |
| 121 | } |
| 122 | |
| 123 | /* Autodetect ZMII mode if not specified. |
| 124 | * This is only for backward compatibility with the old driver. |
| 125 | * Please, always specify PHY mode in your board port to avoid |
| 126 | * any surprises. |
| 127 | */ |
| 128 | if (dev->mode == PHY_MODE_NA) { |
| 129 | if (*mode == PHY_MODE_NA) { |
| 130 | u32 r = dev->fer_save; |
| 131 | |
| 132 | ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL, |
| 133 | ocpdev->def->index, r); |
| 134 | |
| 135 | if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) |
| 136 | dev->mode = PHY_MODE_MII; |
| 137 | else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) |
| 138 | dev->mode = PHY_MODE_RMII; |
| 139 | else |
| 140 | dev->mode = PHY_MODE_SMII; |
| 141 | } else |
| 142 | dev->mode = *mode; |
| 143 | |
| 144 | printk(KERN_NOTICE "zmii%d: bridge in %s mode\n", |
| 145 | ocpdev->def->index, zmii_mode_name(dev->mode)); |
| 146 | } else { |
| 147 | /* All inputs must use the same mode */ |
| 148 | if (*mode != PHY_MODE_NA && *mode != dev->mode) { |
| 149 | printk(KERN_ERR |
| 150 | "zmii%d: invalid mode %d specified for input %d\n", |
| 151 | ocpdev->def->index, *mode, input); |
| 152 | return -EINVAL; |
| 153 | } |
| 154 | } |
| 155 | |
| 156 | /* Report back correct PHY mode, |
| 157 | * it may be used during PHY initialization. |
| 158 | */ |
| 159 | *mode = dev->mode; |
| 160 | |
| 161 | /* Enable this input */ |
| 162 | out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input)); |
| 163 | out: |
| 164 | ++dev->users; |
| 165 | return 0; |
| 166 | } |
| 167 | |
| 168 | int __init zmii_attach(void *emac) |
| 169 | { |
| 170 | struct ocp_enet_private *dev = emac; |
| 171 | struct ocp_func_emac_data *emacdata = dev->def->additions; |
| 172 | |
| 173 | if (emacdata->zmii_idx >= 0) { |
| 174 | dev->zmii_input = emacdata->zmii_mux; |
| 175 | dev->zmii_dev = |
| 176 | ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII, |
| 177 | emacdata->zmii_idx); |
| 178 | if (!dev->zmii_dev) { |
| 179 | printk(KERN_ERR "emac%d: unknown zmii%d!\n", |
| 180 | dev->def->index, emacdata->zmii_idx); |
| 181 | return -ENODEV; |
| 182 | } |
| 183 | if (zmii_init |
| 184 | (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) { |
| 185 | printk(KERN_ERR |
| 186 | "emac%d: zmii%d initialization failed!\n", |
| 187 | dev->def->index, emacdata->zmii_idx); |
| 188 | return -ENODEV; |
| 189 | } |
| 190 | } |
| 191 | return 0; |
| 192 | } |
| 193 | |
| 194 | void __zmii_enable_mdio(struct ocp_device *ocpdev, int input) |
| 195 | { |
| 196 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); |
| 197 | u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL; |
| 198 | |
| 199 | ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input); |
| 200 | |
| 201 | out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input)); |
| 202 | } |
| 203 | |
| 204 | void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed) |
| 205 | { |
| 206 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); |
| 207 | u32 ssr = in_be32(&dev->base->ssr); |
| 208 | |
| 209 | ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); |
| 210 | |
| 211 | if (speed == SPEED_100) |
| 212 | ssr |= ZMII_SSR_SP(input); |
| 213 | else |
| 214 | ssr &= ~ZMII_SSR_SP(input); |
| 215 | |
| 216 | out_be32(&dev->base->ssr, ssr); |
| 217 | } |
| 218 | |
| 219 | void __exit __zmii_fini(struct ocp_device *ocpdev, int input) |
| 220 | { |
| 221 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); |
| 222 | BUG_ON(!dev || dev->users == 0); |
| 223 | |
| 224 | ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); |
| 225 | |
| 226 | /* Disable this input */ |
| 227 | out_be32(&dev->base->fer, |
| 228 | in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input)); |
| 229 | |
| 230 | if (!--dev->users) { |
| 231 | /* Free everything if this is the last user */ |
| 232 | ocp_set_drvdata(ocpdev, NULL); |
Al Viro | b43de2d | 2005-12-01 10:15:21 -0500 | [diff] [blame] | 233 | iounmap(dev->base); |
Eugene Surovegin | 37448f7 | 2005-10-10 16:58:14 -0700 | [diff] [blame] | 234 | kfree(dev); |
| 235 | } |
| 236 | } |
| 237 | |
| 238 | int __zmii_get_regs_len(struct ocp_device *ocpdev) |
| 239 | { |
| 240 | return sizeof(struct emac_ethtool_regs_subhdr) + |
| 241 | sizeof(struct zmii_regs); |
| 242 | } |
| 243 | |
| 244 | void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf) |
| 245 | { |
| 246 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); |
| 247 | struct emac_ethtool_regs_subhdr *hdr = buf; |
| 248 | struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1); |
| 249 | |
| 250 | hdr->version = 0; |
| 251 | hdr->index = ocpdev->def->index; |
| 252 | memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs)); |
| 253 | return regs + 1; |
| 254 | } |