blob: 7826bdce4bbe307042e4459398ff1b6ba87bd3ca [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
Randy Dunlap179b0252007-10-16 01:29:39 -07008source "drivers/char/agp/Kconfig"
9
Dave Airliec0e09202008-05-29 10:09:59 +100010source "drivers/gpu/drm/Kconfig"
Antonino A. Daplasba707102006-06-26 00:26:37 -070011
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -070012config VGASTATE
13 tristate
14 default n
15
Luming Yu23b0f012007-05-09 21:07:05 +080016config VIDEO_OUTPUT_CONTROL
17 tristate "Lowlevel video output switch controls"
Luming Yu23b0f012007-05-09 21:07:05 +080018 help
19 This framework adds support for low-level control of the video
20 output switch.
21
Randy Dunlap179b0252007-10-16 01:29:39 -070022menuconfig FB
Linus Torvalds1da177e2005-04-16 15:20:36 -070023 tristate "Support for frame buffer devices"
24 ---help---
25 The frame buffer device provides an abstraction for the graphics
26 hardware. It represents the frame buffer of some video hardware and
27 allows application software to access the graphics hardware through
28 a well-defined interface, so the software doesn't need to know
29 anything about the low-level (hardware register) stuff.
30
31 Frame buffer devices work identically across the different
32 architectures supported by Linux and make the implementation of
33 application programs easier and more portable; at this point, an X
34 server exists which uses the frame buffer device exclusively.
35 On several non-X86 architectures, the frame buffer device is the
36 only way to use the graphics hardware.
37
38 The device is accessed through special device nodes, usually located
39 in the /dev directory, i.e. /dev/fb*.
40
41 You need an utility program called fbset to make full use of frame
42 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
43 and the Framebuffer-HOWTO at
Alex Buell248ae0d2009-01-29 14:25:16 -080044 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
Linus Torvalds1da177e2005-04-16 15:20:36 -070045 information.
46
47 Say Y here and to the driver for your graphics board below if you
48 are compiling a kernel for a non-x86 architecture.
49
50 If you are compiling for the x86 architecture, you can say Y if you
51 want to play with it, but it is not essential. Please note that
52 running graphical applications that directly touch the hardware
53 (e.g. an accelerated X server) and that are not frame buffer
54 device-aware may cause unexpected results. If unsure, say N.
55
James Simmonse0e34ef2007-02-10 14:15:43 +000056config FIRMWARE_EDID
57 bool "Enable firmware EDID"
58 depends on FB
59 default n
60 ---help---
61 This enables access to the EDID transferred from the firmware.
62 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
63 transfers do not work for your driver and if you are using
64 nvidiafb, i810fb or savagefb.
65
66 In general, choosing Y for this option is safe. If you
67 experience extremely long delays while booting before you get
68 something on your display, try setting this to N. Matrox cards in
69 combination with certain motherboards and monitors are known to
70 suffer from this problem.
71
Dennis Munsiefc5891c2006-10-03 01:14:42 -070072config FB_DDC
73 tristate
James Simmonse0e34ef2007-02-10 14:15:43 +000074 depends on FB
75 select I2C_ALGOBIT
76 select I2C
Dennis Munsiefc5891c2006-10-03 01:14:42 -070077 default n
78
Michal Januszewski4d31a2b2008-10-15 22:03:51 -070079config FB_BOOT_VESA_SUPPORT
80 bool
81 depends on FB
82 default n
83 ---help---
84 If true, at least one selected framebuffer driver can take advantage
85 of VESA video modes set at an early boot stage via the vga= parameter.
86
Linus Torvalds1da177e2005-04-16 15:20:36 -070087config FB_CFB_FILLRECT
88 tristate
89 depends on FB
90 default n
91 ---help---
92 Include the cfb_fillrect function for generic software rectangle
93 filling. This is used by drivers that don't provide their own
94 (accelerated) version.
95
96config FB_CFB_COPYAREA
97 tristate
98 depends on FB
99 default n
100 ---help---
101 Include the cfb_copyarea function for generic software area copying.
102 This is used by drivers that don't provide their own (accelerated)
103 version.
104
105config FB_CFB_IMAGEBLIT
106 tristate
107 depends on FB
108 default n
109 ---help---
110 Include the cfb_imageblit function for generic software image
111 blitting. This is used by drivers that don't provide their own
112 (accelerated) version.
113
Pavel Pisa779121e2007-10-16 01:29:21 -0700114config FB_CFB_REV_PIXELS_IN_BYTE
115 bool
116 depends on FB
117 default n
118 ---help---
119 Allow generic frame-buffer functions to work on displays with 1, 2
120 and 4 bits per pixel depths which has opposite order of pixels in
121 byte order to bytes in long order.
122
Antonino A. Daplas68648ed2007-05-08 00:38:57 -0700123config FB_SYS_FILLRECT
124 tristate
125 depends on FB
126 default n
127 ---help---
128 Include the sys_fillrect function for generic software rectangle
129 filling. This is used by drivers that don't provide their own
130 (accelerated) version and the framebuffer is in system RAM.
131
132config FB_SYS_COPYAREA
133 tristate
134 depends on FB
135 default n
136 ---help---
137 Include the sys_copyarea function for generic software area copying.
138 This is used by drivers that don't provide their own (accelerated)
139 version and the framebuffer is in system RAM.
140
141config FB_SYS_IMAGEBLIT
142 tristate
143 depends on FB
144 default n
145 ---help---
146 Include the sys_imageblit function for generic software image
147 blitting. This is used by drivers that don't provide their own
148 (accelerated) version and the framebuffer is in system RAM.
149
Anton Vorontsove4c690e2008-04-28 02:14:49 -0700150menuconfig FB_FOREIGN_ENDIAN
151 bool "Framebuffer foreign endianness support"
152 depends on FB
153 ---help---
154 This menu will let you enable support for the framebuffers with
155 non-native endianness (e.g. Little-Endian framebuffer on a
156 Big-Endian machine). Most probably you don't have such hardware,
157 so it's safe to say "n" here.
158
159choice
160 prompt "Choice endianness support"
161 depends on FB_FOREIGN_ENDIAN
162
163config FB_BOTH_ENDIAN
164 bool "Support for Big- and Little-Endian framebuffers"
165
166config FB_BIG_ENDIAN
167 bool "Support for Big-Endian framebuffers only"
168
169config FB_LITTLE_ENDIAN
170 bool "Support for Little-Endian framebuffers only"
171
172endchoice
173
Antonino A. Daplas09aaf262007-05-08 00:39:03 -0700174config FB_SYS_FOPS
175 tristate
176 depends on FB
177 default n
178
Jaya Kumar60b59be2007-05-08 00:37:37 -0700179config FB_DEFERRED_IO
180 bool
181 depends on FB
Jaya Kumar60b59be2007-05-08 00:37:37 -0700182
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700183config FB_HECUBA
184 tristate
185 depends on FB
186 depends on FB_DEFERRED_IO
187
Ondrej Zajiceka2684222007-02-12 00:54:49 -0800188config FB_SVGALIB
189 tristate
190 depends on FB
191 default n
192 ---help---
193 Common utility functions useful to fbdev drivers of VGA-based
194 cards.
195
Linus Torvalds1da177e2005-04-16 15:20:36 -0700196config FB_MACMODES
197 tristate
198 depends on FB
199 default n
200
Michael Hanselmann5474c122006-06-25 05:47:08 -0700201config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -0700202 bool
203 depends on FB
204 select BACKLIGHT_LCD_SUPPORT
205 select BACKLIGHT_CLASS_DEVICE
206 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -0700207
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208config FB_MODE_HELPERS
209 bool "Enable Video Mode Handling Helpers"
210 depends on FB
211 default n
212 ---help---
213 This enables functions for handling video modes using the
214 Generalized Timing Formula and the EDID parser. A few drivers rely
215 on this feature such as the radeonfb, rivafb, and the i810fb. If
216 your driver does not take advantage of this feature, choosing Y will
217 just increase the kernel size by about 5K.
218
219config FB_TILEBLITTING
220 bool "Enable Tile Blitting Support"
221 depends on FB
222 default n
223 ---help---
224 This enables tile blitting. Tile blitting is a drawing technique
225 where the screen is divided into rectangular sections (tiles), whereas
226 the standard blitting divides the screen into pixels. Because the
227 default drawing element is a tile, drawing functions will be passed
228 parameters in terms of number of tiles instead of number of pixels.
229 For example, to draw a single character, instead of using bitmaps,
230 an index to an array of bitmaps will be used. To clear or move a
231 rectangular section of a screen, the rectangle will be described in
232 terms of number of tiles in the x- and y-axis.
233
234 This is particularly important to one driver, matroxfb. If
235 unsure, say N.
236
Miguel Ojeda10ccaf42007-04-23 14:41:09 -0700237comment "Frame buffer hardware drivers"
James Simmonse0e34ef2007-02-10 14:15:43 +0000238 depends on FB
239
Linus Torvalds1da177e2005-04-16 15:20:36 -0700240config FB_CIRRUS
241 tristate "Cirrus Logic support"
242 depends on FB && (ZORRO || PCI)
243 select FB_CFB_FILLRECT
244 select FB_CFB_COPYAREA
245 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246 ---help---
247 This enables support for Cirrus Logic GD542x/543x based boards on
248 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
249
250 If you have a PCI-based system, this enables support for these
251 chips: GD-543x, GD-544x, GD-5480.
252
253 Please read the file <file:Documentation/fb/cirrusfb.txt>.
254
255 Say N unless you have such a graphics board or plan to get one
256 before you next recompile the kernel.
257
258config FB_PM2
259 tristate "Permedia2 support"
260 depends on FB && ((AMIGA && BROKEN) || PCI)
261 select FB_CFB_FILLRECT
262 select FB_CFB_COPYAREA
263 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700265 This is the frame buffer device driver for cards based on
266 the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
267 The driver was tested on the following cards:
268 Diamond FireGL 1000 PRO AGP
269 ELSA Gloria Synergy PCI
270 Appian Jeronimo PRO (both heads) PCI
271 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
272 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
273 ASK Graphic Blaster Exxtreme AGP
274
275 To compile this driver as a module, choose M here: the
276 module will be called pm2fb.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700277
278config FB_PM2_FIFO_DISCONNECT
279 bool "enable FIFO disconnect feature"
280 depends on FB_PM2 && PCI
281 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700282 Support the Permedia2 FIFO disconnect feature.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700283
284config FB_ARMCLCD
285 tristate "ARM PrimeCell PL110 support"
286 depends on FB && ARM && ARM_AMBA
287 select FB_CFB_FILLRECT
288 select FB_CFB_COPYAREA
289 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700290 help
291 This framebuffer device driver is for the ARM PrimeCell PL110
292 Colour LCD controller. ARM PrimeCells provide the building
293 blocks for System on a Chip devices.
294
295 If you want to compile this as a module (=code which can be
296 inserted into and removed from the running kernel), say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500297 here and read <file:Documentation/kbuild/modules.txt>. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298 will be called amba-clcd.
299
Marc Singer903e2bb2006-05-16 11:41:30 +0100300choice
301
302 depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
303 prompt "LCD Panel"
304 default FB_ARMCLCD_SHARP_LQ035Q7DB02
305
306config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
307 bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
308 help
309 This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
Matt LaPlantecab00892006-10-03 22:36:44 +0200310 color QVGA, HRTFT panel. The LogicPD device includes
Marc Singer903e2bb2006-05-16 11:41:30 +0100311 an integrated HRTFT controller IC.
312 The native resolution is 240x320.
313
314config FB_ARMCLCD_SHARP_LQ057Q3DC02
315 bool "LogicPD LCD 5.7\" QVGA"
316 help
317 This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
318 color QVGA, TFT panel. The LogicPD device includes an
319 The native resolution is 320x240.
320
321config FB_ARMCLCD_SHARP_LQ64D343
322 bool "LogicPD LCD 6.4\" VGA"
323 help
324 This is an implementation of the Sharp LQ64D343, a 6.4"
325 color VGA, TFT panel. The LogicPD device includes an
326 The native resolution is 640x480.
327
328config FB_ARMCLCD_SHARP_LQ10D368
329 bool "LogicPD LCD 10.4\" VGA"
330 help
331 This is an implementation of the Sharp LQ10D368, a 10.4"
332 color VGA, TFT panel. The LogicPD device includes an
333 The native resolution is 640x480.
334
335
336config FB_ARMCLCD_SHARP_LQ121S1DG41
337 bool "LogicPD LCD 12.1\" SVGA"
338 help
339 This is an implementation of the Sharp LQ121S1DG41, a 12.1"
340 color SVGA, TFT panel. The LogicPD device includes an
341 The native resolution is 800x600.
342
343 This panel requires a clock rate may be an integer fraction
344 of the base LCDCLK frequency. The driver will select the
345 highest frequency available that is lower than the maximum
346 allowed. The panel may flicker if the clock rate is
347 slower than the recommended minimum.
348
349config FB_ARMCLCD_AUO_A070VW01_WIDE
350 bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
351 help
352 This is an implementation of the AU Optronics, a 7.0"
353 WIDE Color. The native resolution is 234x480.
354
355config FB_ARMCLCD_HITACHI
356 bool "Hitachi Wide Screen 800x480"
357 help
358 This is an implementation of the Hitachi 800x480.
359
360endchoice
361
362
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363config FB_ACORN
364 bool "Acorn VIDC support"
Russell King635f0252008-10-28 09:43:54 +0000365 depends on (FB = y) && ARM && ARCH_ACORN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700366 select FB_CFB_FILLRECT
367 select FB_CFB_COPYAREA
368 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369 help
370 This is the frame buffer device driver for the Acorn VIDC graphics
371 hardware found in Acorn RISC PCs and other ARM-based machines. If
372 unsure, say N.
373
374config FB_CLPS711X
375 bool "CLPS711X LCD support"
376 depends on (FB = y) && ARM && ARCH_CLPS711X
377 select FB_CFB_FILLRECT
378 select FB_CFB_COPYAREA
379 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800380 help
381 Say Y to enable the Framebuffer driver for the CLPS7111 and
382 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383
384config FB_SA1100
385 bool "SA-1100 LCD support"
386 depends on (FB = y) && ARM && ARCH_SA1100
387 select FB_CFB_FILLRECT
388 select FB_CFB_COPYAREA
389 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700390 help
391 This is a framebuffer device for the SA-1100 LCD Controller.
392 See <http://www.linux-fbdev.org/> for information on framebuffer
393 devices.
394
395 If you plan to use the LCD display with your SA-1100 system, say
396 Y here.
397
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700398config FB_IMX
399 tristate "Motorola i.MX LCD support"
Holger Schurige4813552009-01-26 16:34:56 +0100400 depends on FB && (ARCH_IMX || ARCH_MX2)
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700401 select FB_CFB_FILLRECT
402 select FB_CFB_COPYAREA
403 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700404
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405config FB_CYBER2000
406 tristate "CyberPro 2000/2010/5000 support"
407 depends on FB && PCI && (BROKEN || !SPARC64)
408 select FB_CFB_FILLRECT
409 select FB_CFB_COPYAREA
410 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700411 help
412 This enables support for the Integraphics CyberPro 20x0 and 5000
413 VGA chips used in the Rebel.com Netwinder and other machines.
414 Say Y if you have a NetWinder or a graphics card containing this
415 device, otherwise say N.
416
417config FB_APOLLO
418 bool
419 depends on (FB = y) && APOLLO
420 default y
421 select FB_CFB_FILLRECT
422 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700423
424config FB_Q40
425 bool
426 depends on (FB = y) && Q40
427 default y
428 select FB_CFB_FILLRECT
429 select FB_CFB_COPYAREA
430 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700431
432config FB_AMIGA
433 tristate "Amiga native chipset support"
434 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435 help
436 This is the frame buffer device driver for the builtin graphics
437 chipset found in Amigas.
438
439 To compile this driver as a module, choose M here: the
440 module will be called amifb.
441
442config FB_AMIGA_OCS
443 bool "Amiga OCS chipset support"
444 depends on FB_AMIGA
445 help
446 This enables support for the original Agnus and Denise video chips,
447 found in the Amiga 1000 and most A500's and A2000's. If you intend
448 to run Linux on any of these systems, say Y; otherwise say N.
449
450config FB_AMIGA_ECS
451 bool "Amiga ECS chipset support"
452 depends on FB_AMIGA
453 help
454 This enables support for the Enhanced Chip Set, found in later
455 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
456 you intend to run Linux on any of these systems, say Y; otherwise
457 say N.
458
459config FB_AMIGA_AGA
460 bool "Amiga AGA chipset support"
461 depends on FB_AMIGA
462 help
463 This enables support for the Advanced Graphics Architecture (also
464 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
465 and CD32. If you intend to run Linux on any of these systems, say Y;
466 otherwise say N.
467
Linus Torvalds1da177e2005-04-16 15:20:36 -0700468config FB_FM2
469 bool "Amiga FrameMaster II/Rainbow II support"
470 depends on (FB = y) && ZORRO
471 select FB_CFB_FILLRECT
472 select FB_CFB_COPYAREA
473 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700474 help
475 This is the frame buffer device driver for the Amiga FrameMaster
476 card from BSC (exhibited 1992 but not shipped as a CBM product).
477
Jaya Kumar1154ea72005-06-21 17:17:04 -0700478config FB_ARC
479 tristate "Arc Monochrome LCD board support"
480 depends on FB && X86
Antonino A. Daplas922e6f92007-05-08 00:38:58 -0700481 select FB_SYS_FILLRECT
482 select FB_SYS_COPYAREA
483 select FB_SYS_IMAGEBLIT
Antonino A. Daplasd9a05f12007-05-08 00:39:04 -0700484 select FB_SYS_FOPS
Jaya Kumar1154ea72005-06-21 17:17:04 -0700485 help
486 This enables support for the Arc Monochrome LCD board. The board
487 is based on the KS-108 lcd controller and is typically a matrix
488 of 2*n chips. This driver was tested with a 128x64 panel. This
489 driver supports it for use with x86 SBCs through a 16 bit GPIO
Matt LaPlante09509602006-10-03 22:31:37 +0200490 interface (8 bit data, 8 bit control). If you anticipate using
Jaya Kumar1154ea72005-06-21 17:17:04 -0700491 this driver, say Y or M; otherwise say N. You must specify the
492 GPIO IO address to be used for setting control and data.
493
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494config FB_ATARI
495 bool "Atari native chipset support"
Michael Schmitza1005012007-05-01 22:32:39 +0200496 depends on (FB = y) && ATARI
497 select FB_CFB_FILLRECT
498 select FB_CFB_COPYAREA
499 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700500 help
501 This is the frame buffer device driver for the builtin graphics
502 chipset found in Ataris.
503
504config FB_OF
505 bool "Open Firmware frame buffer device support"
Stephen Rothwellbed59272007-03-04 17:04:44 +1100506 depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700507 select FB_CFB_FILLRECT
508 select FB_CFB_COPYAREA
509 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700510 select FB_MACMODES
511 help
512 Say Y if you want support with Open Firmware for your graphics
513 board.
514
515config FB_CONTROL
516 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700517 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518 select FB_CFB_FILLRECT
519 select FB_CFB_COPYAREA
520 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700521 select FB_MACMODES
522 help
523 This driver supports a frame buffer for the graphics adapter in the
524 Power Macintosh 7300 and others.
525
526config FB_PLATINUM
527 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700528 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529 select FB_CFB_FILLRECT
530 select FB_CFB_COPYAREA
531 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532 select FB_MACMODES
533 help
534 This driver supports a frame buffer for the "platinum" graphics
535 adapter in some Power Macintoshes.
536
537config FB_VALKYRIE
538 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700539 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540 select FB_CFB_FILLRECT
541 select FB_CFB_COPYAREA
542 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543 select FB_MACMODES
544 help
545 This driver supports a frame buffer for the "valkyrie" graphics
546 adapter in some Power Macintoshes.
547
548config FB_CT65550
549 bool "Chips 65550 display support"
Randy Dunlap0f8c02342007-11-14 16:58:45 -0800550 depends on (FB = y) && PPC32 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700551 select FB_CFB_FILLRECT
552 select FB_CFB_COPYAREA
553 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700554 help
555 This is the frame buffer device driver for the Chips & Technologies
556 65550 graphics chip in PowerBooks.
557
558config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800559 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700560 depends on (FB = y) && PCI
561 select FB_CFB_FILLRECT
562 select FB_CFB_COPYAREA
563 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700564 help
565 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700566
567config FB_IMSTT
568 bool "IMS Twin Turbo display support"
569 depends on (FB = y) && PCI
570 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700571 select FB_MACMODES if PPC
572 help
573 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
574 many Macintosh and compatible computers.
575
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576config FB_VGA16
577 tristate "VGA 16-color graphics support"
578 depends on FB && (X86 || PPC)
579 select FB_CFB_FILLRECT
580 select FB_CFB_COPYAREA
581 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700582 select VGASTATE
Antonino A. Daplasd60d2d82007-05-08 00:39:12 -0700583 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700584 help
585 This is the frame buffer device driver for VGA 16 color graphic
586 cards. Say Y if you have such a card.
587
588 To compile this driver as a module, choose M here: the
589 module will be called vga16fb.
590
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700591config FB_BF54X_LQ043
592 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
Mike Frysingere7a05aa2008-04-28 02:15:47 -0700593 depends on FB && (BF54x) && !BF542
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700594 select FB_CFB_FILLRECT
595 select FB_CFB_COPYAREA
596 select FB_CFB_IMAGEBLIT
597 help
598 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
599
Michael Hennerich99eeed47a2008-03-10 11:44:04 -0700600config FB_BFIN_T350MCQB
601 tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
602 depends on FB && BLACKFIN
603 select BFIN_GPTIMERS
604 select FB_CFB_FILLRECT
605 select FB_CFB_COPYAREA
606 select FB_CFB_IMAGEBLIT
607 help
608 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
609 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
610 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
611
612
Linus Torvalds1da177e2005-04-16 15:20:36 -0700613config FB_STI
614 tristate "HP STI frame buffer device support"
615 depends on FB && PARISC
616 select FB_CFB_FILLRECT
617 select FB_CFB_COPYAREA
618 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700619 default y
620 ---help---
621 STI refers to the HP "Standard Text Interface" which is a set of
622 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
623 Enabling this option will implement the linux framebuffer device
624 using calls to the STI BIOS routines for initialisation.
625
626 If you enable this option, you will get a planar framebuffer device
627 /dev/fb which will work on the most common HP graphic cards of the
628 NGLE family, including the artist chips (in the 7xx and Bxxx series),
629 HCRX, HCRX24, CRX, CRX24 and VisEG series.
630
631 It is safe to enable this option, so you should probably say "Y".
632
633config FB_MAC
634 bool "Generic Macintosh display support"
635 depends on (FB = y) && MAC
636 select FB_CFB_FILLRECT
637 select FB_CFB_COPYAREA
638 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639 select FB_MACMODES
640
Linus Torvalds1da177e2005-04-16 15:20:36 -0700641config FB_HP300
642 bool
Geert Uytterhoevenad7e4842008-05-18 20:47:09 +0200643 depends on (FB = y) && DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700644 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700645 default y
646
647config FB_TGA
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700648 tristate "TGA/SFB+ framebuffer support"
649 depends on FB && (ALPHA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700650 select FB_CFB_FILLRECT
651 select FB_CFB_COPYAREA
652 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800653 select BITREVERSE
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700654 ---help---
655 This is the frame buffer device driver for generic TGA and SFB+
656 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
657 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
658 TURBOchannel cards, also known as PMAGD-A, -B and -C.
659
660 Due to hardware limitations ZLX-E2 and E3 cards are not supported
661 for DECstation 5000/200 systems. Additionally due to firmware
662 limitations these cards may cause troubles with booting DECstation
663 5000/240 and /260 systems, but are fully supported under Linux if
664 you manage to get it going. ;-)
665
666 Say Y if you have one of those.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700667
Michal Januszewski8bdb3a22007-10-16 01:28:26 -0700668config FB_UVESA
669 tristate "Userspace VESA VGA graphics support"
670 depends on FB && CONNECTOR
671 select FB_CFB_FILLRECT
672 select FB_CFB_COPYAREA
673 select FB_CFB_IMAGEBLIT
674 select FB_MODE_HELPERS
675 help
676 This is the frame buffer driver for generic VBE 2.0 compliant
677 graphic cards. It can also take advantage of VBE 3.0 features,
678 such as refresh rate adjustment.
679
680 This driver generally provides more features than vesafb but
681 requires a userspace helper application called 'v86d'. See
682 <file:Documentation/fb/uvesafb.txt> for more information.
683
684 If unsure, say N.
685
Linus Torvalds1da177e2005-04-16 15:20:36 -0700686config FB_VESA
687 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800688 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700689 select FB_CFB_FILLRECT
690 select FB_CFB_COPYAREA
691 select FB_CFB_IMAGEBLIT
Michal Januszewski4d31a2b2008-10-15 22:03:51 -0700692 select FB_BOOT_VESA_SUPPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700693 help
694 This is the frame buffer device driver for generic VESA 2.0
695 compliant graphic cards. The older VESA 1.2 cards are not supported.
696 You will get a boot time penguin logo at no additional cost. Please
697 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
698
Huang, Ying7c831722007-11-28 16:21:55 -0800699config FB_EFI
700 bool "EFI-based Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700701 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700702 select FB_CFB_FILLRECT
703 select FB_CFB_COPYAREA
704 select FB_CFB_IMAGEBLIT
705 help
Peter Jones7c08c9a2008-10-15 22:03:43 -0700706 This is the EFI frame buffer device driver. If the firmware on
707 your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
708 using the EFI framebuffer as your console.
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700709
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700710config FB_N411
711 tristate "N411 Apollo/Hecuba devkit support"
Jaya Kumaraad09e52007-05-08 00:37:43 -0700712 depends on FB && X86 && MMU
Antonino A. Daplasd6774932007-05-08 00:39:00 -0700713 select FB_SYS_FILLRECT
714 select FB_SYS_COPYAREA
715 select FB_SYS_IMAGEBLIT
Antonino A. Daplas28d45642007-05-08 00:39:06 -0700716 select FB_SYS_FOPS
Jaya Kumaraad09e52007-05-08 00:37:43 -0700717 select FB_DEFERRED_IO
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700718 select FB_HECUBA
Jaya Kumaraad09e52007-05-08 00:37:43 -0700719 help
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700720 This enables support for the Apollo display controller in its
721 Hecuba form using the n411 devkit.
Jaya Kumaraad09e52007-05-08 00:37:43 -0700722
Linus Torvalds1da177e2005-04-16 15:20:36 -0700723config FB_HGA
724 tristate "Hercules mono graphics support"
725 depends on FB && X86
726 select FB_CFB_FILLRECT
727 select FB_CFB_COPYAREA
728 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700729 help
730 Say Y here if you have a Hercules mono graphics card.
731
732 To compile this driver as a module, choose M here: the
733 module will be called hgafb.
734
735 As this card technology is 15 years old, most people will answer N
736 here.
737
738config FB_HGA_ACCEL
739 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
740 depends on FB_HGA && EXPERIMENTAL
741 ---help---
742 This will compile the Hercules mono graphics with
743 acceleration functions.
744
Linus Torvalds1da177e2005-04-16 15:20:36 -0700745config FB_SGIVW
746 tristate "SGI Visual Workstation framebuffer support"
747 depends on FB && X86_VISWS
748 select FB_CFB_FILLRECT
749 select FB_CFB_COPYAREA
750 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700751 help
752 SGI Visual Workstation support for framebuffer graphics.
753
754config FB_GBE
755 bool "SGI Graphics Backend frame buffer support"
756 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
757 select FB_CFB_FILLRECT
758 select FB_CFB_COPYAREA
759 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700760 help
761 This is the frame buffer device driver for SGI Graphics Backend.
762 This chip is used in SGI O2 and Visual Workstation 320/540.
763
764config FB_GBE_MEM
765 int "Video memory size in MB"
766 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800767 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700768 help
769 This is the amount of memory reserved for the framebuffer,
770 which can be any value between 1MB and 8MB.
771
Mark Fortescue1a571982005-11-29 19:34:44 -0800772config FB_SBUS
773 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800774 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800775 help
776 Say Y if you want support for SBUS or UPA based frame buffer device.
777
Linus Torvalds1da177e2005-04-16 15:20:36 -0700778config FB_BW2
779 bool "BWtwo support"
Adrian Bunke0196302007-02-12 00:54:50 -0800780 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700781 select FB_CFB_FILLRECT
782 select FB_CFB_COPYAREA
783 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700784 help
785 This is the frame buffer device driver for the BWtwo frame buffer.
786
787config FB_CG3
788 bool "CGthree support"
Adrian Bunke0196302007-02-12 00:54:50 -0800789 depends on (FB = y) && (SPARC && FB_SBUS)
Mark Fortescue1a571982005-11-29 19:34:44 -0800790 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700791 select FB_CFB_COPYAREA
792 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700793 help
794 This is the frame buffer device driver for the CGthree frame buffer.
795
796config FB_CG6
797 bool "CGsix (GX,TurboGX) support"
Adrian Bunke0196302007-02-12 00:54:50 -0800798 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700799 select FB_CFB_COPYAREA
800 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700801 help
802 This is the frame buffer device driver for the CGsix (GX, TurboGX)
803 frame buffer.
804
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700805config FB_FFB
806 bool "Creator/Creator3D/Elite3D support"
807 depends on FB_SBUS && SPARC64
808 select FB_CFB_COPYAREA
809 select FB_CFB_IMAGEBLIT
810 help
811 This is the frame buffer device driver for the Creator, Creator3D,
812 and Elite3D graphics boards.
813
814config FB_TCX
815 bool "TCX (SS4/SS5 only) support"
816 depends on FB_SBUS
817 select FB_CFB_FILLRECT
818 select FB_CFB_COPYAREA
819 select FB_CFB_IMAGEBLIT
820 help
821 This is the frame buffer device driver for the TCX 24/8bit frame
822 buffer.
823
824config FB_CG14
825 bool "CGfourteen (SX) support"
826 depends on FB_SBUS
827 select FB_CFB_FILLRECT
828 select FB_CFB_COPYAREA
829 select FB_CFB_IMAGEBLIT
830 help
831 This is the frame buffer device driver for the CGfourteen frame
832 buffer on Desktop SPARCsystems with the SX graphics option.
833
834config FB_P9100
835 bool "P9100 (Sparcbook 3 only) support"
836 depends on FB_SBUS
837 select FB_CFB_FILLRECT
838 select FB_CFB_COPYAREA
839 select FB_CFB_IMAGEBLIT
840 help
841 This is the frame buffer device driver for the P9100 card
842 supported on Sparcbook 3 machines.
843
844config FB_LEO
845 bool "Leo (ZX) support"
846 depends on FB_SBUS
847 select FB_CFB_FILLRECT
848 select FB_CFB_COPYAREA
849 select FB_CFB_IMAGEBLIT
850 help
851 This is the frame buffer device driver for the SBUS-based Sun ZX
852 (leo) frame buffer cards.
853
854config FB_IGA
855 bool "IGA 168x display support"
David S. Millere11a6c22007-06-03 17:35:24 -0700856 depends on (FB = y) && SPARC32
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700857 select FB_CFB_FILLRECT
858 select FB_CFB_COPYAREA
859 select FB_CFB_IMAGEBLIT
860 help
861 This is the framebuffer device for the INTERGRAPHICS 1680 and
862 successor frame buffer cards.
863
864config FB_XVR500
865 bool "Sun XVR-500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700866 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700867 select FB_CFB_FILLRECT
868 select FB_CFB_COPYAREA
869 select FB_CFB_IMAGEBLIT
870 help
871 This is the framebuffer device for the Sun XVR-500 and similar
872 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200873 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700874 mostly initialized the card already. It is treated as a
875 completely dumb framebuffer device.
876
877config FB_XVR2500
878 bool "Sun XVR-2500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700879 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700880 select FB_CFB_FILLRECT
881 select FB_CFB_COPYAREA
882 select FB_CFB_IMAGEBLIT
883 help
884 This is the framebuffer device for the Sun XVR-2500 and similar
885 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200886 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700887 mostly initialized the card already. It is treated as a
888 completely dumb framebuffer device.
889
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890config FB_PVR2
891 tristate "NEC PowerVR 2 display support"
892 depends on FB && SH_DREAMCAST
893 select FB_CFB_FILLRECT
894 select FB_CFB_COPYAREA
895 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700896 ---help---
897 Say Y here if you have a PowerVR 2 card in your box. If you plan to
898 run linux on your Dreamcast, you will have to say Y here.
899 This driver may or may not work on other PowerVR 2 cards, but is
900 totally untested. Use at your own risk. If unsure, say N.
901
902 To compile this driver as a module, choose M here: the
903 module will be called pvr2fb.
904
905 You can pass several parameters to the driver at boot time or at
906 module load time. The parameters look like "video=pvr2:XXX", where
907 the meaning of XXX can be found at the end of the main source file
908 (<file:drivers/video/pvr2fb.c>). Please see the file
909 <file:Documentation/fb/pvr2fb.txt>.
910
911config FB_EPSON1355
912 bool "Epson 1355 framebuffer support"
Paul Mundt1a3f2882007-07-17 04:05:48 -0700913 depends on (FB = y) && ARCH_CEIVA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700914 select FB_CFB_FILLRECT
915 select FB_CFB_COPYAREA
916 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700917 help
918 Build in support for the SED1355 Epson Research Embedded RAMDAC
919 LCD/CRT Controller (since redesignated as the S1D13505) as a
920 framebuffer. Product specs at
921 <http://www.erd.epson.com/vdc/html/products.htm>.
922
Randy Dunlapecc41d52005-11-07 01:00:29 -0800923config FB_S1D13XXX
924 tristate "Epson S1D13XXX framebuffer support"
925 depends on FB
926 select FB_CFB_FILLRECT
927 select FB_CFB_COPYAREA
928 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800929 help
930 Support for S1D13XXX framebuffer device family (currently only
931 working with S1D13806). Product specs at
932 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
933
Nicolas Ferre14340582007-05-10 22:23:26 -0700934config FB_ATMEL
935 tristate "AT91/AT32 LCD Controller support"
Andrew Victor2b3b3512008-01-24 15:10:39 +0100936 depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
Nicolas Ferre14340582007-05-10 22:23:26 -0700937 select FB_CFB_FILLRECT
938 select FB_CFB_COPYAREA
939 select FB_CFB_IMAGEBLIT
940 help
941 This enables support for the AT91/AT32 LCD Controller.
942
943config FB_INTSRAM
944 bool "Frame Buffer in internal SRAM"
945 depends on FB_ATMEL && ARCH_AT91SAM9261
946 help
947 Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
948 to let frame buffer in external SDRAM.
949
Nicolas Ferre250a2692007-07-21 04:37:59 -0700950config FB_ATMEL_STN
951 bool "Use a STN display with AT91/AT32 LCD Controller"
952 depends on FB_ATMEL && MACH_AT91SAM9261EK
953 default n
954 help
955 Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
956 Controller. Say N if you want to connect a TFT.
957
958 If unsure, say N.
959
Linus Torvalds1da177e2005-04-16 15:20:36 -0700960config FB_NVIDIA
961 tristate "nVidia Framebuffer Support"
962 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +0000963 select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700964 select FB_MODE_HELPERS
965 select FB_CFB_FILLRECT
966 select FB_CFB_COPYAREA
967 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800968 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700969 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700970 help
971 This driver supports graphics boards with the nVidia chips, TNT
972 and newer. For very old chipsets, such as the RIVA128, then use
973 the rivafb.
974 Say Y if you have such a graphics board.
975
976 To compile this driver as a module, choose M here: the
977 module will be called nvidiafb.
978
979config FB_NVIDIA_I2C
980 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -0800981 depends on FB_NVIDIA
James Simmons166f60d2007-03-06 01:42:02 -0800982 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700983 help
984 This enables I2C support for nVidia Chipsets. This is used
985 only for getting EDID information from the attached display
986 allowing for robust video mode handling and switching.
987
988 Because fbdev-2.6 requires that drivers must be able to
989 independently validate video mode parameters, you should say Y
990 here.
991
Jean Delvare647f2e72007-05-10 22:23:29 -0700992config FB_NVIDIA_DEBUG
993 bool "Lots of debug output"
994 depends on FB_NVIDIA
995 default n
996 help
997 Say Y here if you want the nVidia driver to output all sorts
998 of debugging information to provide to the maintainer when
999 something goes wrong.
1000
Michael Hanselmann5474c122006-06-25 05:47:08 -07001001config FB_NVIDIA_BACKLIGHT
1002 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001003 depends on FB_NVIDIA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001004 default y
1005 help
1006 Say Y here if you want to control the backlight of your display.
1007
Linus Torvalds1da177e2005-04-16 15:20:36 -07001008config FB_RIVA
1009 tristate "nVidia Riva support"
1010 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001011 select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001012 select FB_MODE_HELPERS
1013 select FB_CFB_FILLRECT
1014 select FB_CFB_COPYAREA
1015 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -08001016 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001017 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001018 help
1019 This driver supports graphics boards with the nVidia Riva/Geforce
1020 chips.
1021 Say Y if you have such a graphics board.
1022
1023 To compile this driver as a module, choose M here: the
1024 module will be called rivafb.
1025
1026config FB_RIVA_I2C
1027 bool "Enable DDC Support"
1028 depends on FB_RIVA
James Simmons166f60d2007-03-06 01:42:02 -08001029 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001030 help
1031 This enables I2C support for nVidia Chipsets. This is used
1032 only for getting EDID information from the attached display
1033 allowing for robust video mode handling and switching.
1034
1035 Because fbdev-2.6 requires that drivers must be able to
1036 independently validate video mode parameters, you should say Y
1037 here.
1038
1039config FB_RIVA_DEBUG
Jean Delvare647f2e72007-05-10 22:23:29 -07001040 bool "Lots of debug output"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001041 depends on FB_RIVA
1042 default n
1043 help
1044 Say Y here if you want the Riva driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001045 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001046 something goes wrong.
1047
Michael Hanselmann5474c122006-06-25 05:47:08 -07001048config FB_RIVA_BACKLIGHT
1049 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001050 depends on FB_RIVA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001051 default y
1052 help
1053 Say Y here if you want to control the backlight of your display.
1054
Linus Torvalds1da177e2005-04-16 15:20:36 -07001055config FB_I810
1056 tristate "Intel 810/815 support (EXPERIMENTAL)"
Krzysztof Helta1a5c3b2009-02-18 14:48:38 -08001057 depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001058 select FB_MODE_HELPERS
1059 select FB_CFB_FILLRECT
1060 select FB_CFB_COPYAREA
1061 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001062 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001063 help
1064 This driver supports the on-board graphics built in to the Intel 810
1065 and 815 chipsets. Say Y if you have and plan to use such a board.
1066
1067 To compile this driver as a module, choose M here: the
1068 module will be called i810fb.
1069
1070 For more information, please read
1071 <file:Documentation/fb/intel810.txt>
1072
1073config FB_I810_GTF
1074 bool "use VESA Generalized Timing Formula"
1075 depends on FB_I810
1076 help
1077 If you say Y, then the VESA standard, Generalized Timing Formula
1078 or GTF, will be used to calculate the required video timing values
1079 per video mode. Since the GTF allows nondiscrete timings
1080 (nondiscrete being a range of values as opposed to discrete being a
1081 set of values), you'll be able to use any combination of horizontal
1082 and vertical resolutions, and vertical refresh rates without having
1083 to specify your own timing parameters. This is especially useful
1084 to maximize the performance of an aging display, or if you just
1085 have a display with nonstandard dimensions. A VESA compliant
1086 monitor is recommended, but can still work with non-compliant ones.
1087 If you need or want this, then select this option. The timings may
1088 not be compliant with Intel's recommended values. Use at your own
1089 risk.
1090
1091 If you say N, the driver will revert to discrete video timings
1092 using a set recommended by Intel in their documentation.
1093
1094 If unsure, say N.
1095
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001096config FB_I810_I2C
1097 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -07001098 depends on FB_I810 && FB_I810_GTF
Antonino A. Daplase80987f2006-10-03 01:14:44 -07001099 select FB_DDC
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001100 help
1101
Alan Hourihanedbe7e422007-05-08 00:39:25 -07001102config FB_LE80578
1103 tristate "Intel LE80578 (Vermilion) support"
1104 depends on FB && PCI && X86
1105 select FB_MODE_HELPERS
1106 select FB_CFB_FILLRECT
1107 select FB_CFB_COPYAREA
1108 select FB_CFB_IMAGEBLIT
1109 help
1110 This driver supports the LE80578 (Vermilion Range) chipset
1111
1112config FB_CARILLO_RANCH
1113 tristate "Intel Carillo Ranch support"
1114 depends on FB_LE80578 && FB && PCI && X86
1115 help
1116 This driver supports the LE80578 (Carillo Ranch) board
1117
Linus Torvalds1da177e2005-04-16 15:20:36 -07001118config FB_INTEL
Maik Broemme0e170c72008-04-28 02:15:43 -07001119 tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
Krzysztof Helta1a5c3b2009-02-18 14:48:38 -08001120 depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001121 select FB_MODE_HELPERS
1122 select FB_CFB_FILLRECT
1123 select FB_CFB_COPYAREA
1124 select FB_CFB_IMAGEBLIT
Michal Januszewski4d31a2b2008-10-15 22:03:51 -07001125 select FB_BOOT_VESA_SUPPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001126 help
1127 This driver supports the on-board graphics built in to the Intel
Maik Broemme0e170c72008-04-28 02:15:43 -07001128 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001129 Say Y if you have and plan to use such a board.
1130
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001131 If you say Y here and want DDC/I2C support you must first say Y to
1132 "I2C support" and "I2C bit-banging support" in the character devices
1133 section.
1134
1135 If you say M here then "I2C support" and "I2C bit-banging support"
1136 can be build either as modules or built-in.
1137
1138 To compile this driver as a module, choose M here: the
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139 module will be called intelfb.
1140
Christian Merkled463d342006-08-22 10:07:01 +10001141 For more information, please read <file:Documentation/fb/intelfb.txt>
1142
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143config FB_INTEL_DEBUG
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001144 bool "Intel driver Debug Messages"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001145 depends on FB_INTEL
1146 ---help---
1147 Say Y here if you want the Intel driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001148 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001149 something goes wrong.
1150
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001151config FB_INTEL_I2C
1152 bool "DDC/I2C for Intel framebuffer support"
1153 depends on FB_INTEL
James Simmons166f60d2007-03-06 01:42:02 -08001154 select FB_DDC
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001155 default y
1156 help
1157 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1158
Linus Torvalds1da177e2005-04-16 15:20:36 -07001159config FB_MATROX
1160 tristate "Matrox acceleration"
1161 depends on FB && PCI
1162 select FB_CFB_FILLRECT
1163 select FB_CFB_COPYAREA
1164 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001165 select FB_TILEBLITTING
1166 select FB_MACMODES if PPC_PMAC
1167 ---help---
1168 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
1169 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
1170 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
1171 Matrox G400, G450 or G550 card in your box.
1172
1173 To compile this driver as a module, choose M here: the
1174 module will be called matroxfb.
1175
1176 You can pass several parameters to the driver at boot time or at
1177 module load time. The parameters look like "video=matrox:XXX", and
1178 are described in <file:Documentation/fb/matroxfb.txt>.
1179
1180config FB_MATROX_MILLENIUM
1181 bool "Millennium I/II support"
1182 depends on FB_MATROX
1183 help
1184 Say Y here if you have a Matrox Millennium or Matrox Millennium II
1185 video card. If you select "Advanced lowlevel driver options" below,
1186 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
1187 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
1188 also use font widths different from 8.
1189
1190config FB_MATROX_MYSTIQUE
1191 bool "Mystique support"
1192 depends on FB_MATROX
1193 help
1194 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
1195 video card. If you select "Advanced lowlevel driver options" below,
1196 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
1197 packed pixel and 32 bpp packed pixel. You can also use font widths
1198 different from 8.
1199
1200config FB_MATROX_G
1201 bool "G100/G200/G400/G450/G550 support"
1202 depends on FB_MATROX
1203 ---help---
1204 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1205 video card. If you select "Advanced lowlevel driver options", you
1206 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
1207 pixel and 32 bpp packed pixel. You can also use font widths
1208 different from 8.
1209
1210 If you need support for G400 secondary head, you must first say Y to
1211 "I2C support" in the character devices section, and then to
1212 "Matrox I2C support" and "G400 second head support" here in the
1213 framebuffer section. G450/G550 secondary head and digital output
1214 are supported without additional modules.
1215
1216 The driver starts in monitor mode. You must use the matroxset tool
1217 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1218 swap primary and secondary head outputs, or to change output mode.
1219 Secondary head driver always start in 640x480 resolution and you
1220 must use fbset to change it.
1221
1222 Do not forget that second head supports only 16 and 32 bpp
1223 packed pixels, so it is a good idea to compile them into the kernel
1224 too. You can use only some font widths, as the driver uses generic
1225 painting procedures (the secondary head does not use acceleration
1226 engine).
1227
1228 G450/G550 hardware can display TV picture only from secondary CRTC,
1229 and it performs no scaling, so picture must have 525 or 625 lines.
1230
1231config FB_MATROX_I2C
1232 tristate "Matrox I2C support"
James Simmons166f60d2007-03-06 01:42:02 -08001233 depends on FB_MATROX
1234 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001235 ---help---
1236 This drivers creates I2C buses which are needed for accessing the
1237 DDC (I2C) bus present on all Matroxes, an I2C bus which
1238 interconnects Matrox optional devices, like MGA-TVO on G200 and
1239 G400, and the secondary head DDC bus, present on G400 only.
1240
1241 You can say Y or M here if you want to experiment with monitor
1242 detection code. You must say Y or M here if you want to use either
1243 second head of G400 or MGA-TVO on G200 or G400.
1244
1245 If you compile it as module, it will create a module named
1246 i2c-matroxfb.
1247
1248config FB_MATROX_MAVEN
1249 tristate "G400 second head support"
1250 depends on FB_MATROX_G && FB_MATROX_I2C
1251 ---help---
1252 WARNING !!! This support does not work with G450 !!!
1253
1254 Say Y or M here if you want to use a secondary head (meaning two
1255 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1256 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1257 secondary head output is blanked while you are in X. With XFree
1258 3.9.17 preview you can use both heads if you use SVGA over fbdev or
1259 the fbdev driver on first head and the fbdev driver on second head.
1260
1261 If you compile it as module, two modules are created,
1262 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1263 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1264 also load i2c-matroxfb to get it to run.
1265
1266 The driver starts in monitor mode and you must use the matroxset
1267 tool (available at
1268 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1269 PAL or NTSC or to swap primary and secondary head outputs.
1270 Secondary head driver also always start in 640x480 resolution, you
1271 must use fbset to change it.
1272
1273 Also do not forget that second head supports only 16 and 32 bpp
1274 packed pixels, so it is a good idea to compile them into the kernel
1275 too. You can use only some font widths, as the driver uses generic
1276 painting procedures (the secondary head does not use acceleration
1277 engine).
1278
1279config FB_MATROX_MULTIHEAD
1280 bool "Multihead support"
1281 depends on FB_MATROX
1282 ---help---
1283 Say Y here if you have more than one (supported) Matrox device in
1284 your computer and you want to use all of them for different monitors
1285 ("multihead"). If you have only one device, you should say N because
1286 the driver compiled with Y is larger and a bit slower, especially on
1287 ia32 (ix86).
1288
1289 If you said M to "Matrox unified accelerated driver" and N here, you
1290 will still be able to use several Matrox devices simultaneously:
1291 insert several instances of the module matroxfb into the kernel
1292 with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
1293 for the different Matrox devices. This method is slightly faster but
1294 uses 40 KB of kernel memory per Matrox card.
1295
1296 There is no need for enabling 'Matrox multihead support' if you have
1297 only one Matrox card in the box.
1298
Linus Torvalds1da177e2005-04-16 15:20:36 -07001299config FB_RADEON
1300 tristate "ATI Radeon display support"
1301 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001302 select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001303 select FB_MODE_HELPERS
1304 select FB_CFB_FILLRECT
1305 select FB_CFB_COPYAREA
1306 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001307 select FB_MACMODES if PPC_OF
1308 help
1309 Choose this option if you want to use an ATI Radeon graphics card as
1310 a framebuffer device. There are both PCI and AGP versions. You
1311 don't need to choose this to run the Radeon in plain VGA mode.
1312
1313 If you say Y here and want DDC/I2C support you must first say Y to
1314 "I2C support" and "I2C bit-banging support" in the character devices
1315 section.
1316
1317 If you say M here then "I2C support" and "I2C bit-banging support"
1318 can be build either as modules or built-in.
1319
1320 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -07001321 http://apps.ati.com/ATIcompare/
Michael Hanselmann5474c122006-06-25 05:47:08 -07001322
Linus Torvalds1da177e2005-04-16 15:20:36 -07001323config FB_RADEON_I2C
1324 bool "DDC/I2C for ATI Radeon support"
1325 depends on FB_RADEON
James Simmons166f60d2007-03-06 01:42:02 -08001326 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001327 default y
1328 help
1329 Say Y here if you want DDC/I2C support for your Radeon board.
1330
Michael Hanselmann5474c122006-06-25 05:47:08 -07001331config FB_RADEON_BACKLIGHT
1332 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001333 depends on FB_RADEON
Michael Hanselmann5474c122006-06-25 05:47:08 -07001334 default y
1335 help
1336 Say Y here if you want to control the backlight of your display.
1337
Linus Torvalds1da177e2005-04-16 15:20:36 -07001338config FB_RADEON_DEBUG
1339 bool "Lots of debug output from Radeon driver"
1340 depends on FB_RADEON
1341 default n
1342 help
1343 Say Y here if you want the Radeon driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001344 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001345 something goes wrong.
1346
1347config FB_ATY128
1348 tristate "ATI Rage128 display support"
1349 depends on FB && PCI
1350 select FB_CFB_FILLRECT
1351 select FB_CFB_COPYAREA
1352 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001353 select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001354 select FB_MACMODES if PPC_PMAC
1355 help
1356 This driver supports graphics boards with the ATI Rage128 chips.
1357 Say Y if you have such a graphics board and read
1358 <file:Documentation/fb/aty128fb.txt>.
1359
1360 To compile this driver as a module, choose M here: the
1361 module will be called aty128fb.
1362
Michael Hanselmann5474c122006-06-25 05:47:08 -07001363config FB_ATY128_BACKLIGHT
1364 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001365 depends on FB_ATY128
Michael Hanselmann5474c122006-06-25 05:47:08 -07001366 default y
1367 help
1368 Say Y here if you want to control the backlight of your display.
1369
Linus Torvalds1da177e2005-04-16 15:20:36 -07001370config FB_ATY
1371 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001372 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001373 select FB_CFB_FILLRECT
1374 select FB_CFB_COPYAREA
1375 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001376 select FB_BACKLIGHT if FB_ATY_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001377 select FB_MACMODES if PPC
1378 help
1379 This driver supports graphics boards with the ATI Mach64 chips.
1380 Say Y if you have such a graphics board.
1381
1382 To compile this driver as a module, choose M here: the
1383 module will be called atyfb.
1384
1385config FB_ATY_CT
1386 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1387 depends on PCI && FB_ATY
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -07001388 default y if SPARC64 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001389 help
1390 Say Y here to support use of ATI's 64-bit Rage boards (or other
1391 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1392 framebuffer device. The ATI product support page for these boards
1393 is at <http://support.ati.com/products/pc/mach64/>.
1394
1395config FB_ATY_GENERIC_LCD
1396 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1397 depends on FB_ATY_CT
1398 help
1399 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1400 Rage XC, or Rage XL chipset.
1401
Linus Torvalds1da177e2005-04-16 15:20:36 -07001402config FB_ATY_GX
1403 bool "Mach64 GX support" if PCI
1404 depends on FB_ATY
1405 default y if ATARI
1406 help
1407 Say Y here to support use of the ATI Mach64 Graphics Expression
1408 board (or other boards based on the Mach64 GX chipset) as a
1409 framebuffer device. The ATI product support page for these boards
1410 is at
1411 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1412
Michael Hanselmann5474c122006-06-25 05:47:08 -07001413config FB_ATY_BACKLIGHT
1414 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001415 depends on FB_ATY
Michael Hanselmann5474c122006-06-25 05:47:08 -07001416 default y
1417 help
1418 Say Y here if you want to control the backlight of your display.
1419
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001420config FB_S3
1421 tristate "S3 Trio/Virge support"
1422 depends on FB && PCI
1423 select FB_CFB_FILLRECT
1424 select FB_CFB_COPYAREA
1425 select FB_CFB_IMAGEBLIT
1426 select FB_TILEBLITTING
1427 select FB_SVGALIB
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001428 select VGASTATE
Antonino A. Daplas8db51662007-05-08 00:39:14 -07001429 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001430 ---help---
1431 Driver for graphics boards with S3 Trio / S3 Virge chip.
1432
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433config FB_SAVAGE
1434 tristate "S3 Savage support"
1435 depends on FB && PCI && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001436 select FB_MODE_HELPERS
1437 select FB_CFB_FILLRECT
1438 select FB_CFB_COPYAREA
1439 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001440 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001441 help
1442 This driver supports notebooks and computers with S3 Savage PCI/AGP
1443 chips.
1444
1445 Say Y if you have such a graphics card.
1446
1447 To compile this driver as a module, choose M here; the module
1448 will be called savagefb.
1449
1450config FB_SAVAGE_I2C
1451 bool "Enable DDC2 Support"
1452 depends on FB_SAVAGE
James Simmons166f60d2007-03-06 01:42:02 -08001453 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001454 help
1455 This enables I2C support for S3 Savage Chipsets. This is used
1456 only for getting EDID information from the attached display
1457 allowing for robust video mode handling and switching.
1458
1459 Because fbdev-2.6 requires that drivers must be able to
1460 independently validate video mode parameters, you should say Y
1461 here.
1462
1463config FB_SAVAGE_ACCEL
1464 bool "Enable Console Acceleration"
1465 depends on FB_SAVAGE
1466 default n
1467 help
1468 This option will compile in console acceleration support. If
1469 the resulting framebuffer console has bothersome glitches, then
1470 choose N here.
1471
1472config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001473 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001474 depends on FB && PCI
1475 select FB_CFB_FILLRECT
1476 select FB_CFB_COPYAREA
1477 select FB_CFB_IMAGEBLIT
Michal Januszewski4d31a2b2008-10-15 22:03:51 -07001478 select FB_BOOT_VESA_SUPPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001479 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001480 This is the frame buffer device driver for the SiS 300, 315, 330
1481 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1482 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001483
1484 To compile this driver as a module, choose M here; the module
1485 will be called sisfb.
1486
1487config FB_SIS_300
1488 bool "SiS 300 series support"
1489 depends on FB_SIS
1490 help
1491 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1492
1493config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001494 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001495 depends on FB_SIS
1496 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001497 Say Y here to support use of the SiS 315, 330 and 340 series
1498 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1499 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001500
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001501config FB_VIA
1502 tristate "VIA UniChrome (Pro) and Chrome9 display support"
1503 depends on FB && PCI
1504 select FB_CFB_FILLRECT
1505 select FB_CFB_COPYAREA
1506 select FB_CFB_IMAGEBLIT
1507 select FB_SOFT_CURSOR
1508 select I2C_ALGOBIT
1509 select I2C
1510 help
1511 This is the frame buffer device driver for Graphics chips of VIA
1512 UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
1513 CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
1514 /P4M900,VX800)
1515 Say Y if you have a VIA UniChrome graphics board.
1516
1517 To compile this driver as a module, choose M here: the
1518 module will be called viafb.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001519config FB_NEOMAGIC
1520 tristate "NeoMagic display support"
1521 depends on FB && PCI
1522 select FB_MODE_HELPERS
1523 select FB_CFB_FILLRECT
1524 select FB_CFB_COPYAREA
1525 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001526 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001527 help
1528 This driver supports notebooks with NeoMagic PCI chips.
1529 Say Y if you have such a graphics card.
1530
1531 To compile this driver as a module, choose M here: the
1532 module will be called neofb.
1533
1534config FB_KYRO
1535 tristate "IMG Kyro support"
1536 depends on FB && PCI
1537 select FB_CFB_FILLRECT
1538 select FB_CFB_COPYAREA
1539 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001540 help
1541 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1542 graphics board.
1543
1544 To compile this driver as a module, choose M here: the
1545 module will be called kyrofb.
1546
1547config FB_3DFX
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001548 tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001549 depends on FB && PCI
1550 select FB_CFB_IMAGEBLIT
1551 select FB_CFB_FILLRECT
1552 select FB_CFB_COPYAREA
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001553 select FB_MODE_HELPERS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001554 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001555 This driver supports graphics boards with the 3Dfx Banshee,
1556 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1557 such a graphics board.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001558
1559 To compile this driver as a module, choose M here: the
1560 module will be called tdfxfb.
1561
1562config FB_3DFX_ACCEL
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001563 bool "3Dfx Acceleration functions (EXPERIMENTAL)"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001564 depends on FB_3DFX && EXPERIMENTAL
1565 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001566 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1567 device driver with acceleration functions.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001568
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001569config FB_3DFX_I2C
1570 bool "Enable DDC/I2C support"
1571 depends on FB_3DFX && EXPERIMENTAL
1572 select FB_DDC
1573 default y
1574 help
1575 Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1576
Linus Torvalds1da177e2005-04-16 15:20:36 -07001577config FB_VOODOO1
1578 tristate "3Dfx Voodoo Graphics (sst1) support"
1579 depends on FB && PCI
1580 select FB_CFB_FILLRECT
1581 select FB_CFB_COPYAREA
1582 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001583 ---help---
1584 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1585 Voodoo2 (cvg) based graphics card.
1586
1587 To compile this driver as a module, choose M here: the
1588 module will be called sstfb.
1589
1590 WARNING: Do not use any application that uses the 3D engine
1591 (namely glide) while using this driver.
Dirk Hohndele4031492007-10-30 13:37:19 -07001592 Please read the <file:Documentation/fb/sstfb.txt> for supported
Linus Torvalds1da177e2005-04-16 15:20:36 -07001593 options and other important info support.
1594
Ondrej Zajicek558b7bd2007-05-09 02:35:31 -07001595config FB_VT8623
1596 tristate "VIA VT8623 support"
1597 depends on FB && PCI
1598 select FB_CFB_FILLRECT
1599 select FB_CFB_COPYAREA
1600 select FB_CFB_IMAGEBLIT
1601 select FB_TILEBLITTING
1602 select FB_SVGALIB
1603 select VGASTATE
1604 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1605 ---help---
1606 Driver for CastleRock integrated graphics core in the
1607 VIA VT8623 [Apollo CLE266] chipset.
1608
Linus Torvalds1da177e2005-04-16 15:20:36 -07001609config FB_TRIDENT
Krzysztof Helt04645fc2009-03-31 15:25:48 -07001610 tristate "Trident/CyberXXX/CyberBlade support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001611 depends on FB && PCI
1612 select FB_CFB_FILLRECT
1613 select FB_CFB_COPYAREA
1614 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001615 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001616 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1617 Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
1618 and Blade XP.
1619 There are also integrated versions of these chips called CyberXXXX,
1620 CyberImage or CyberBlade. These chips are mostly found in laptops
Krzysztof Heltddb53d42009-03-31 15:25:40 -07001621 but also on some motherboards including early VIA EPIA motherboards.
1622 For more information, read <file:Documentation/fb/tridentfb.txt>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001623
1624 Say Y if you have such a graphics board.
1625
1626 To compile this driver as a module, choose M here: the
1627 module will be called tridentfb.
1628
Ondrej Zajicek681e1472007-05-09 02:35:31 -07001629config FB_ARK
1630 tristate "ARK 2000PV support"
1631 depends on FB && PCI
1632 select FB_CFB_FILLRECT
1633 select FB_CFB_COPYAREA
1634 select FB_CFB_IMAGEBLIT
1635 select FB_TILEBLITTING
1636 select FB_SVGALIB
1637 select VGASTATE
1638 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1639 ---help---
1640 Driver for PCI graphics boards with ARK 2000PV chip
1641 and ICS 5342 RAMDAC.
1642
Linus Torvalds1da177e2005-04-16 15:20:36 -07001643config FB_PM3
Krzysztof Heltf23a06f2007-05-10 22:23:25 -07001644 tristate "Permedia3 support (EXPERIMENTAL)"
1645 depends on FB && PCI && EXPERIMENTAL
1646 select FB_CFB_FILLRECT
1647 select FB_CFB_COPYAREA
1648 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001649 help
1650 This is the frame buffer device driver for the 3DLabs Permedia3
1651 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1652 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1653 and maybe other boards.
1654
Sebastian Siewior2ece5f432008-07-23 21:30:49 -07001655config FB_CARMINE
1656 tristate "Fujitsu carmine frame buffer support"
1657 depends on FB && PCI
1658 select FB_CFB_FILLRECT
1659 select FB_CFB_COPYAREA
1660 select FB_CFB_IMAGEBLIT
1661 help
1662 This is the frame buffer device driver for the Fujitsu Carmine chip.
1663 The driver provides two independent frame buffer devices.
1664
1665choice
1666 depends on FB_CARMINE
1667 prompt "DRAM timing"
1668 default FB_CARMINE_DRAM_EVAL
1669
1670config FB_CARMINE_DRAM_EVAL
1671 bool "Eval board timings"
1672 help
1673 Use timings which work on the eval card.
1674
1675config CARMINE_DRAM_CUSTOM
1676 bool "Custom board timings"
1677 help
1678 Use custom board timings.
1679endchoice
1680
Linus Torvalds1da177e2005-04-16 15:20:36 -07001681config FB_AU1100
1682 bool "Au1100 LCD Driver"
Ralf Baechled1709e42007-07-23 18:43:50 -07001683 depends on (FB = y) && MIPS && SOC_AU1100
1684 select FB_CFB_FILLRECT
1685 select FB_CFB_COPYAREA
1686 select FB_CFB_IMAGEBLIT
1687 help
1688 This is the framebuffer driver for the AMD Au1100 SOC. It can drive
1689 various panels and CRTs by passing in kernel cmd line option
1690 au1100fb:panel=<name>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001691
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001692config FB_AU1200
1693 bool "Au1200 LCD Driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001694 depends on (FB = y) && MIPS && SOC_AU1200
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001695 select FB_CFB_FILLRECT
1696 select FB_CFB_COPYAREA
1697 select FB_CFB_IMAGEBLIT
1698 help
1699 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1700 various panels and CRTs by passing in kernel cmd line option
1701 au1200fb:panel=<name>.
1702
Linus Torvalds1da177e2005-04-16 15:20:36 -07001703source "drivers/video/geode/Kconfig"
1704
Linus Torvalds1da177e2005-04-16 15:20:36 -07001705config FB_HIT
1706 tristate "HD64461 Frame Buffer support"
1707 depends on FB && HD64461
1708 select FB_CFB_FILLRECT
1709 select FB_CFB_COPYAREA
1710 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001711 help
1712 This is the frame buffer device driver for the Hitachi HD64461 LCD
1713 frame buffer card.
1714
1715config FB_PMAG_AA
1716 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001717 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001718 select FB_CFB_FILLRECT
1719 select FB_CFB_COPYAREA
1720 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001721 help
1722 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1723 used mainly in the MIPS-based DECstation series.
1724
1725config FB_PMAG_BA
Maciej W. Rozycki335dc502007-02-05 16:28:28 -08001726 tristate "PMAG-BA TURBOchannel framebuffer support"
1727 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001728 select FB_CFB_FILLRECT
1729 select FB_CFB_COPYAREA
1730 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001731 help
1732 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1733 used mainly in the MIPS-based DECstation series.
1734
1735config FB_PMAGB_B
Maciej W. Rozycki9084b002007-02-05 16:28:29 -08001736 tristate "PMAGB-B TURBOchannel framebuffer support"
Maciej W. Rozycki28ea28a2007-10-16 01:29:28 -07001737 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001738 select FB_CFB_FILLRECT
1739 select FB_CFB_COPYAREA
1740 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001741 help
1742 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1743 in the MIPS-based DECstation series. The card is currently only
1744 supported in 1280x1024x8 mode.
1745
1746config FB_MAXINE
1747 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001748 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001749 select FB_CFB_FILLRECT
1750 select FB_CFB_COPYAREA
1751 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001752 help
1753 Support for the onboard framebuffer (1024x768x8) in the Personal
1754 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1755 Codename "Maxine").
1756
Linus Torvalds1da177e2005-04-16 15:20:36 -07001757config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001758 bool "G364 frame buffer support"
1759 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001760 select FB_CFB_FILLRECT
1761 select FB_CFB_COPYAREA
1762 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001763 help
1764 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1765 Olivetti M700-10 systems.
1766
1767config FB_68328
1768 bool "Motorola 68328 native frame buffer support"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001769 depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001770 select FB_CFB_FILLRECT
1771 select FB_CFB_COPYAREA
1772 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001773 help
1774 Say Y here if you want to support the built-in frame buffer of
1775 the Motorola 68328 CPU family.
1776
1777config FB_PXA
1778 tristate "PXA LCD framebuffer support"
1779 depends on FB && ARCH_PXA
1780 select FB_CFB_FILLRECT
1781 select FB_CFB_COPYAREA
1782 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001783 ---help---
1784 Frame buffer driver for the built-in LCD controller in the Intel
1785 PXA2x0 processor.
1786
1787 This driver is also available as a module ( = code which can be
1788 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001789 module will be called pxafb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001790 say M here and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001791
1792 If unsure, say N.
1793
Eric Miao198fc102008-12-23 17:49:43 +08001794config FB_PXA_OVERLAY
1795 bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
1796 default n
1797 depends on FB_PXA && (PXA27x || PXA3xx)
1798
Eric Miao3c42a442008-04-30 00:52:26 -07001799config FB_PXA_SMARTPANEL
1800 bool "PXA Smartpanel LCD support"
Eric Miao7f1133c2008-04-30 00:52:27 -07001801 default n
Eric Miao3c42a442008-04-30 00:52:26 -07001802 depends on FB_PXA
1803
Linus Torvalds1da177e2005-04-16 15:20:36 -07001804config FB_PXA_PARAMETERS
1805 bool "PXA LCD command line parameters"
1806 default n
1807 depends on FB_PXA
1808 ---help---
1809 Enable the use of kernel command line or module parameters
1810 to configure the physical properties of the LCD panel when
1811 using the PXA LCD driver.
1812
1813 This option allows you to override the panel parameters
1814 supplied by the platform in order to support multiple
1815 different models of flatpanel. If you will only be using a
1816 single model of flatpanel then you can safely leave this
1817 option disabled.
1818
1819 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1820
Mike Rapoport22caf042006-07-14 00:24:34 -07001821config FB_MBX
1822 tristate "2700G LCD framebuffer support"
1823 depends on FB && ARCH_PXA
1824 select FB_CFB_FILLRECT
1825 select FB_CFB_COPYAREA
1826 select FB_CFB_IMAGEBLIT
1827 ---help---
1828 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1829 Accelerator
1830
1831config FB_MBX_DEBUG
1832 bool "Enable debugging info via debugfs"
1833 depends on FB_MBX && DEBUG_FS
1834 default n
1835 ---help---
1836 Enable this if you want debugging information using the debug
1837 filesystem (debugfs)
1838
1839 If unsure, say N.
1840
York Sun9b53a9e2008-04-28 02:15:34 -07001841config FB_FSL_DIU
1842 tristate "Freescale DIU framebuffer support"
1843 depends on FB && FSL_SOC
1844 select FB_CFB_FILLRECT
1845 select FB_CFB_COPYAREA
1846 select FB_CFB_IMAGEBLIT
1847 select PPC_LIB_RHEAP
1848 ---help---
1849 Framebuffer driver for the Freescale SoC DIU
1850
Randy Dunlapecc41d52005-11-07 01:00:29 -08001851config FB_W100
1852 tristate "W100 frame buffer support"
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001853 depends on FB && ARCH_PXA
Randy Dunlapecc41d52005-11-07 01:00:29 -08001854 select FB_CFB_FILLRECT
1855 select FB_CFB_COPYAREA
1856 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001857 ---help---
1858 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001859 It can also drive the w3220 chip found on iPAQ hx4700.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001860
1861 This driver is also available as a module ( = code which can be
1862 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001863 module will be called w100fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001864 say M here and read <file:Documentation/kbuild/modules.txt>.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001865
1866 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001867
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001868config FB_SH_MOBILE_LCDC
1869 tristate "SuperH Mobile LCDC framebuffer support"
1870 depends on FB && SUPERH
Magnus Damm2540c112008-12-17 17:29:49 +09001871 select FB_SYS_FILLRECT
1872 select FB_SYS_COPYAREA
1873 select FB_SYS_IMAGEBLIT
1874 select FB_SYS_FOPS
Magnus Damm85645572008-12-19 15:34:41 +09001875 select FB_DEFERRED_IO
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001876 ---help---
1877 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1878
Dmitry Baryshkovb53cde32008-10-15 22:03:55 -07001879config FB_TMIO
1880 tristate "Toshiba Mobile IO FrameBuffer support"
1881 depends on FB && MFD_CORE
1882 select FB_CFB_FILLRECT
1883 select FB_CFB_COPYAREA
1884 select FB_CFB_IMAGEBLIT
1885 ---help---
1886 Frame buffer driver for the Toshiba Mobile IO integrated as found
1887 on the Sharp SL-6000 series
1888
1889 This driver is also available as a module ( = code which can be
1890 inserted and removed from the running kernel whenever you want). The
1891 module will be called tmiofb. If you want to compile it as a module,
1892 say M here and read <file:Documentation/kbuild/modules.txt>.
1893
1894 If unsure, say N.
1895
1896config FB_TMIO_ACCELL
1897 bool "tmiofb acceleration"
1898 depends on FB_TMIO
1899 default y
1900
Ben Dooksec549a02009-03-31 15:25:39 -07001901config FB_S3C
1902 tristate "Samsung S3C framebuffer support"
1903 depends on FB && ARCH_S3C64XX
1904 select FB_CFB_FILLRECT
1905 select FB_CFB_COPYAREA
1906 select FB_CFB_IMAGEBLIT
1907 ---help---
1908 Frame buffer driver for the built-in FB controller in the Samsung
1909 SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
1910 and the S3C64XX series such as the S3C6400 and S3C6410.
1911
1912 These chips all have the same basic framebuffer design with the
1913 actual capabilities depending on the chip. For instance the S3C6400
1914 and S3C6410 support 4 hardware windows whereas the S3C24XX series
1915 currently only have two.
1916
1917 Currently the support is only for the S3C6400 and S3C6410 SoCs.
1918
1919config FB_S3C_DEBUG_REGWRITE
1920 bool "Debug register writes"
1921 depends on FB_S3C
1922 ---help---
1923 Show all register writes via printk(KERN_DEBUG)
1924
Arnaud Patard20fd5762005-09-09 13:10:07 -07001925config FB_S3C2410
1926 tristate "S3C2410 LCD framebuffer support"
1927 depends on FB && ARCH_S3C2410
1928 select FB_CFB_FILLRECT
1929 select FB_CFB_COPYAREA
1930 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07001931 ---help---
1932 Frame buffer driver for the built-in LCD controller in the Samsung
1933 S3C2410 processor.
1934
1935 This driver is also available as a module ( = code which can be
1936 inserted and removed from the running kernel whenever you want). The
1937 module will be called s3c2410fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001938 say M here and read <file:Documentation/kbuild/modules.txt>.
Arnaud Patard20fd5762005-09-09 13:10:07 -07001939
1940 If unsure, say N.
1941config FB_S3C2410_DEBUG
1942 bool "S3C2410 lcd debug messages"
1943 depends on FB_S3C2410
1944 help
1945 Turn on debugging messages. Note that you can set/unset at run time
1946 through sysfs
1947
Ben Dooks5fc404e2007-02-20 13:58:21 -08001948config FB_SM501
1949 tristate "Silicon Motion SM501 framebuffer support"
1950 depends on FB && MFD_SM501
1951 select FB_CFB_FILLRECT
1952 select FB_CFB_COPYAREA
1953 select FB_CFB_IMAGEBLIT
1954 ---help---
1955 Frame buffer driver for the CRT and LCD controllers in the Silicon
1956 Motion SM501.
1957
1958 This driver is also available as a module ( = code which can be
1959 inserted and removed from the running kernel whenever you want). The
1960 module will be called sm501fb. If you want to compile it as a module,
Dirk Hohndele4031492007-10-30 13:37:19 -07001961 say M here and read <file:Documentation/kbuild/modules.txt>.
Ben Dooks5fc404e2007-02-20 13:58:21 -08001962
1963 If unsure, say N.
1964
1965
Vitaly Wool36c93662006-07-03 00:24:19 -07001966config FB_PNX4008_DUM
1967 tristate "Display Update Module support on Philips PNX4008 board"
1968 depends on FB && ARCH_PNX4008
1969 ---help---
1970 Say Y here to enable support for PNX4008 Display Update Module (DUM)
1971
1972config FB_PNX4008_DUM_RGB
1973 tristate "RGB Framebuffer support on Philips PNX4008 board"
1974 depends on FB_PNX4008_DUM
1975 select FB_CFB_FILLRECT
1976 select FB_CFB_COPYAREA
1977 select FB_CFB_IMAGEBLIT
1978 ---help---
1979 Say Y here to enable support for PNX4008 RGB Framebuffer
1980
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001981config FB_IBM_GXT4500
1982 tristate "Framebuffer support for IBM GXT4500P adaptor"
Randy Dunlap0058f472007-10-16 01:29:35 -07001983 depends on FB && PPC
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001984 select FB_CFB_FILLRECT
1985 select FB_CFB_COPYAREA
1986 select FB_CFB_IMAGEBLIT
1987 ---help---
1988 Say Y here to enable support for the IBM GXT4500P display
1989 adaptor, found on some IBM System P (pSeries) machines.
1990
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001991config FB_PS3
Geert Uytterhoeven9e6b99b2007-06-16 08:05:38 +10001992 tristate "PS3 GPU framebuffer driver"
1993 depends on FB && PS3_PS3AV
Geert Uytterhoeven92c45792007-05-23 13:57:50 -07001994 select FB_SYS_FILLRECT
1995 select FB_SYS_COPYAREA
1996 select FB_SYS_IMAGEBLIT
1997 select FB_SYS_FOPS
Geert Uytterhoeven23e9c942007-07-21 04:37:49 -07001998 select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001999 ---help---
2000 Include support for the virtual frame buffer in the PS3 platform.
2001
2002config FB_PS3_DEFAULT_SIZE_M
2003 int "PS3 default frame buffer size (in MiB)"
2004 depends on FB_PS3
Geert Uytterhoeven50b25292007-07-21 04:37:50 -07002005 default 9
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08002006 ---help---
2007 This is the default size (in MiB) of the virtual frame buffer in
2008 the PS3.
2009 The default value can be overridden on the kernel command line
2010 using the "ps3fb" option (e.g. "ps3fb=9M");
2011
Andrei Konovalov147394c2007-05-08 00:40:18 -07002012config FB_XILINX
2013 tristate "Xilinx frame buffer support"
2014 depends on FB && XILINX_VIRTEX
2015 select FB_CFB_FILLRECT
2016 select FB_CFB_COPYAREA
2017 select FB_CFB_IMAGEBLIT
2018 ---help---
2019 Include support for the Xilinx ML300/ML403 reference design
2020 framebuffer. ML300 carries a 640*480 LCD display on the board,
2021 ML403 uses a standard DB15 VGA connector.
2022
Yoichi Yuasa5abe3b42008-07-23 21:31:40 -07002023config FB_COBALT
2024 tristate "Cobalt server LCD frame buffer support"
2025 depends on FB && MIPS_COBALT
2026
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002027config FB_SH7760
Nobuhiro Iwamatsu5c72f302008-11-21 14:35:29 +09002028 bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
2029 depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
2030 || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
2031 select FB_CFB_FILLRECT
2032 select FB_CFB_COPYAREA
2033 select FB_CFB_IMAGEBLIT
2034 ---help---
2035 Support for the SH7760/SH7763/SH7720/SH7721 integrated
2036 (D)STN/TFT LCD Controller.
2037 Supports display resolutions up to 1024x1024 pixel, grayscale and
2038 color operation, with depths ranging from 1 bpp to 8 bpp monochrome
2039 and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
2040 panels <= 320 pixel horizontal resolution.
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002041
Linus Torvalds1da177e2005-04-16 15:20:36 -07002042config FB_VIRTUAL
2043 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2044 depends on FB
Antonino A. Daplas87b48842007-05-08 00:39:01 -07002045 select FB_SYS_FILLRECT
2046 select FB_SYS_COPYAREA
2047 select FB_SYS_IMAGEBLIT
Antonino A. Daplas52102c02007-05-08 00:39:07 -07002048 select FB_SYS_FOPS
Linus Torvalds1da177e2005-04-16 15:20:36 -07002049 ---help---
2050 This is a `virtual' frame buffer device. It operates on a chunk of
2051 unswappable kernel memory instead of on the memory of a graphics
2052 board. This means you cannot see any output sent to this frame
2053 buffer device, while it does consume precious memory. The main use
2054 of this frame buffer device is testing and debugging the frame
2055 buffer subsystem. Do NOT enable it for normal systems! To protect
2056 the innocent, it has to be enabled explicitly at boot time using the
2057 kernel option `video=vfb:'.
2058
2059 To compile this driver as a module, choose M here: the
Mike Frysinger66cf7512006-10-03 01:14:41 -07002060 module will be called vfb. In order to load it, you must use
2061 the vfb_enable=1 option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002062
2063 If unsure, say N.
James Simmonse0e34ef2007-02-10 14:15:43 +00002064
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002065config XEN_FBDEV_FRONTEND
2066 tristate "Xen virtual frame buffer support"
2067 depends on FB && XEN
2068 select FB_SYS_FILLRECT
2069 select FB_SYS_COPYAREA
2070 select FB_SYS_IMAGEBLIT
2071 select FB_SYS_FOPS
2072 select FB_DEFERRED_IO
2073 default y
2074 help
2075 This driver implements the front-end of the Xen virtual
2076 frame buffer driver. It communicates with a back-end
2077 in another domain.
2078
Jaya Kumare9355082008-08-19 11:17:55 +01002079config FB_METRONOME
2080 tristate "E-Ink Metronome/8track controller support"
2081 depends on FB
2082 select FB_SYS_FILLRECT
2083 select FB_SYS_COPYAREA
2084 select FB_SYS_IMAGEBLIT
2085 select FB_SYS_FOPS
2086 select FB_DEFERRED_IO
2087 help
2088 This driver implements support for the E-Ink Metronome
2089 controller. The pre-release name for this device was 8track
2090 and could also have been called by some vendors as PVI-nnnn.
2091
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002092config FB_MB862XX
2093 tristate "Fujitsu MB862xx GDC support"
2094 depends on FB
2095 select FB_CFB_FILLRECT
2096 select FB_CFB_COPYAREA
2097 select FB_CFB_IMAGEBLIT
2098 ---help---
2099 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2100
2101config FB_MB862XX_PCI_GDC
2102 bool "Carmine/Coral-P(A) GDC"
2103 depends on PCI && FB_MB862XX
2104 ---help---
2105 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2106 PCI graphics controller devices.
2107
2108config FB_MB862XX_LIME
2109 bool "Lime GDC"
2110 depends on FB_MB862XX
2111 depends on OF && !FB_MB862XX_PCI_GDC
2112 select FB_FOREIGN_ENDIAN
2113 select FB_LITTLE_ENDIAN
2114 ---help---
2115 Framebuffer support for Fujitsu Lime GDC on host CPU bus.
2116
2117config FB_PRE_INIT_FB
2118 bool "Don't reinitialize, use bootloader's GDC/Display configuration"
2119 depends on FB_MB862XX_LIME
2120 ---help---
2121 Select this option if display contents should be inherited as set by
2122 the bootloader.
2123
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002124config FB_MX3
Guennadi Liakhovetski6e1588c2009-02-26 21:34:28 +01002125 tristate "MX3 Framebuffer support"
2126 depends on FB && MX3_IPU
2127 select FB_CFB_FILLRECT
2128 select FB_CFB_COPYAREA
2129 select FB_CFB_IMAGEBLIT
2130 default y
2131 help
2132 This is a framebuffer device for the i.MX31 LCD Controller. So
2133 far only synchronous displays are supported. If you plan to use
2134 an LCD display with your i.MX31 system, say Y here.
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002135
Jaya Kumar0d4ff4d2009-01-01 17:49:19 +01002136config FB_BROADSHEET
2137 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2138 depends on FB
2139 select FB_SYS_FILLRECT
2140 select FB_SYS_COPYAREA
2141 select FB_SYS_IMAGEBLIT
2142 select FB_SYS_FOPS
2143 select FB_DEFERRED_IO
2144 help
2145 This driver implements support for the E-Ink Broadsheet
2146 controller. The release name for this device was Epson S1D13521
2147 and could also have been called by other names when coupled with
2148 a bridge adapter.
2149
Randy Dunlapf08f3892007-10-29 14:37:16 -07002150source "drivers/video/omap/Kconfig"
Randy Dunlap0058f472007-10-16 01:29:35 -07002151
Randy Dunlap179b0252007-10-16 01:29:39 -07002152source "drivers/video/backlight/Kconfig"
2153source "drivers/video/display/Kconfig"
2154
Linus Torvalds1da177e2005-04-16 15:20:36 -07002155if VT
2156 source "drivers/video/console/Kconfig"
2157endif
2158
2159if FB || SGI_NEWPORT_CONSOLE
2160 source "drivers/video/logo/Kconfig"
2161endif
2162
Linus Torvalds1da177e2005-04-16 15:20:36 -07002163endmenu