Gitiles
Code Review
Sign In
gerrit-public.fairphone.software
/
kernel
/
msm
/
4bcf349a0f90d1e69eb35c6df0fa285c886c1cd6
/
drivers
/
scsi
/
qla2xxx
f9932de
[SCSI] qla2xxx: Update version number to 8.03.00-k2.
by Andrew Vasquez
· 16 years ago
3c01b4f
[SCSI] qla2xxx: Add checks for a valid fcport in dev-loss-tmo/terminate_rport_io callbacks.
by Seokmann Ju
· 16 years ago
53303c4
[SCSI] qla2xxx: Correct regression in DMA-mask setting prior to allocations.
by Andrew Vasquez
· 16 years ago
b872ca4
[SCSI] qla2xxx: Correct descriptions in flash manipulation routines.
by Joe Carnuccio
· 16 years ago
2ac4b64
[SCSI] qla2xxx: Correct regression in EH abort handling.
by Andrew Vasquez
· 16 years ago
7c28317
[SCSI] qla2xxx: Correct endianness issue during flash manipulation.
by Andrew Vasquez
· 16 years ago
ad038fa
[SCSI] qla2xxx: Correct MSI-X vector allocation for single queue mode.
by Lalit Chandivade
· 16 years ago
eaac30b
[SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.
by Andrew Vasquez
· 16 years ago
8eca3f3
[SCSI] qla2xxx: Always serialize mailbox command execution.
by Andrew Vasquez
· 16 years ago
09ff36d
[SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for IS_NOPOLLING_TYPE() ISPs.
by Andrew Vasquez
· 16 years ago
85d0acb
[SCSI] qla2xxx: Simplify sector-mask calculation in preparation for larger flash parts.
by Andrew Vasquez
· 16 years ago
6e9f21f
[SCSI] qla2xxx: Fix memory leak in error path
by Anirban Chakraborty
· 16 years ago
29bdccb
[SCSI] qla2xxx: Fix ISP restart bug in multiq code
by Anirban Chakraborty
· 16 years ago
ffda8c7
[SCSI] qla2xxx: Update version number to 8.03.00-k1.
by Andrew Vasquez
· 16 years ago
3a03eb7
[SCSI] qla2xxx: Add ISP81XX support.
by Andrew Vasquez
· 16 years ago
444786d
[SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.
by Andrew Vasquez
· 16 years ago
d63ab53
[SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump.
by Andrew Vasquez
· 16 years ago
bb99de6
[SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.
by Andrew Vasquez
· 16 years ago
3fd67cd
[SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages.
by Andrew Vasquez
· 16 years ago
124f85e
[SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled.
by Andrew Vasquez
· 16 years ago
1ded85e
[SCSI] qla2xxx: Remove support for reading/writing HW-event-log.
by Andrew Vasquez
· 16 years ago
17d9863
[SCSI] qla2xxx: changes in multiq code
by Anirban Chakraborty
· 16 years ago
73208df
[SCSI] qla2xxx: add support for multi-queue adapter
by Anirban Chakraborty
· 16 years ago
749af3d
[SCSI] qla2xxx: Code changes for vport bus reset
by Anirban Chakraborty
· 16 years ago
c51da4e
[SCSI] qla2xxx: Fix for build warning
by Anirban Chakraborty
· 16 years ago
e315cd2
[SCSI] qla2xxx: Code changes for qla data structure refactoring
by Anirban Chakraborty
· 16 years ago
7b867cf
[SCSI] qla2xxx: Refactor qla data structures
by Anirban Chakraborty
· 16 years ago
3869a17
[SCSI] qla2xxx: Update version number to 8.02.01-k9.
by Andrew Vasquez
· 16 years ago
5bff55d
[SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails.
by Michael Reed
· 16 years ago
680d7db
[SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below.
by Shyam Sundar
· 16 years ago
737faec
[SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space.
by Andrew Vasquez
· 16 years ago
821b399
[SCSI] qla2xxx: Correct Atmel flash-part handling.
by Lalit Chandivade
· 16 years ago
0927678
PCI: use pci_find_ext_capability everywhere
by Jesse Barnes
· 16 years ago
16dbef4
PCI: change MSI-x vector to 32bit
by Yinghai Lu
· 16 years ago
056a448
[SCSI] qla2xxx: use new host byte transport errors.
by Mike Christie
· 16 years ago
9cc328f
[SCSI] ibmvfc, qla2xxx, lpfc: remove scsi_target_unblock calls in terminate callbacks
by Mike Christie
· 16 years ago
7b59413
[SCSI] qla2xxx: return SCSI_MLQUEUE_TARGET_BUSY when driver has detected rport error or race
by Mike Christie
· 16 years ago
4a3e1ea
[SCSI] qla2xxx: fix printk format warnings
by Alexander Beregalov
· 16 years ago
36d1cdc
[SCSI] qla2xxx: Update version number to 8.02.01-k8.
by Andrew Vasquez
· 16 years ago
59d72d8
[SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
by Ravi Anand
· 16 years ago
2d13693
[SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
by Andrew Vasquez
· 16 years ago
cc3ef7b
[SCSI] qla2xxx: Fix "occured" spelling errors.
by Bjorn Helgaas
· 16 years ago
272976c
[SCSI] qla2xxx: Add NPIV-Config Table support.
by Andrew Vasquez
· 16 years ago
c00d899
[SCSI] qla2xxx: Add Flash Layout Table support.
by Andrew Vasquez
· 16 years ago
4b89258
[SCSI] qla2xxx: Change GFP_ATOMIC to GFP_KERNEL for non-atomic allocations.
by Andrew Vasquez
· 16 years ago
49fd462
[SCSI] qla2xxx: Add input/output byte-count statistics.
by Harish Zunjarrao
· 16 years ago
3fd7f93
[SCSI] qla2xxx: Remove semaphore.h
by Matthew Wilcox
· 16 years ago
048feec
[SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes.
by Andrew Vasquez
· 16 years ago
7a8fc9b
removed unused #include <linux/version.h>'s
by Adrian Bunk
· 16 years ago
bcd2361
[SCSI] qla2xxx: Update version number to 8.02.01-k7.
by Andrew Vasquez
· 16 years ago
c795c1e
[SCSI] qla2xxx: Explicitly tear-down vports during PCI remove_one().
by Andrew Vasquez
· 16 years ago
19851f1
[SCSI] qla2xxx: Reference proper ha during SBR handling.
by Andrew Vasquez
· 16 years ago
946fb89
[SCSI] qla2xxx: Set npiv_supported flag for FCoE HBAs.
by Mike Hernandez
· 16 years ago
bed475c
[SCSI] qla2xxx: Don't leak SG-DMA mappings while aborting commands.
by Andrew Vasquez
· 16 years ago
a7a2850
[SCSI] qla2xxx: Correct vport-state management issues during ISP-ABORT.
by Andrew Vasquez
· 16 years ago
6390d1f
[SCSI] qla2xxx: Correct synchronization of software/firmware fcport states.
by Andrew Vasquez
· 16 years ago
00eabe7
[SCSI] qla2xxx: fix msleep compile error
by FUJITA Tomonori
· 16 years ago
4cfc510
[SCSI] qla2xxx: Update version number to 8.02.01-k6.
by Andrew Vasquez
· 16 years ago
c9c5ced
[SCSI] qla2xxx: Additional NPIV corrections.
by Andrew Vasquez
· 16 years ago
bf6583b
[SCSI] qla2xxx: suppress uninitialized-var warning
by Andrew Morton
· 16 years ago
b3dc908
[SCSI] qla2xxx: use memory_read_from_buffer()
by Akinobu Mita
· 16 years ago
8201e20
[SCSI] qla2xxx: Issue proper ISP callbacks during stop-firmware.
by Andrew Vasquez
· 16 years ago
f0773b5
[SCSI] qla2xxx: Update version number to 8.02.01-k5.
by Andrew Vasquez
· 16 years ago
6d05252
[SCSI] qla2xxx: Don't hardcode fw_transfer_size for ISP2[45]xx parts.
by Andrew Vasquez
· 16 years ago
42e421b
[SCSI] qla2xxx: Verify the RISC is not in ROM code if firmware-load is disabled.
by Andrew Vasquez
· 16 years ago
e792121
[SCSI] qla2xxx: Correct overflow during dump-processing on large-memory ISP23xx parts.
by Andrew Vasquez
· 16 years ago
031e134
[SCSI] qla2xxx: Skip FDMI registration on ISP21xx/22xx parts.
by Andrew Vasquez
· 16 years ago
5de1f70
[SCSI] qla2xxx: Correct rport/fcport visibility-state handling during loop-resync.
by Seokmann Ju
· 16 years ago
da57bf8
[SCSI] qla2xxx: Correct vport management of MBA_PORT_UPDATE.
by Seokmann Ju
· 16 years ago
8f0d643
[SCSI] qla2xxx: Correct fcport state-management during loss.
by Seokmann Ju
· 16 years ago
246de42
[SCSI] qla2xxx: Always aquire the parent's hardware_lock.
by Seokmann Ju
· 16 years ago
436a7b1
[SCSI] qla2xxx: Swap enablement order of EFT and FCE.
by Andrew Vasquez
· 16 years ago
1ee2714
[SCSI] qla2xxx: Retrieve board serial-number and description from VPD.
by Joe Carnuccio
· 16 years ago
e5896bd
[SCSI] qla2xxx: Allow the user the option of disabling iIDMA.
by Andrew Vasquez
· 16 years ago
711c1d9
[SCSI] qla2xxx: Cleanup NPIV related functions
by Seokmann Ju
· 16 years ago
032d8dd
[SCSI] qla2xxx: Add LIP count to FC-transport statistics.
by Harish Zunjarrao
· 16 years ago
e5f5f6f
[SCSI] qla2xxx: Track total number of ISP aborts.
by Harish Zunjarrao
· 16 years ago
85821c9
[SCSI] qla2xxx: Set an rport's dev_loss_tmo value in a consistent manner.
by Andrew Vasquez
· 16 years ago
5f3a9a2
[SCSI] qla2xxx: Add dev_loss_tmo_callbk/terminate_rport_io callback support.
by Seokmann Ju
· 16 years ago
bbfb21d
[SCSI] qla2xxx: Correct locking during NVRAM manipulation.
by Andrew Vasquez
· 16 years ago
28d7647
[SCSI] qla2xxx: Update version number to 8.02.01-k4.
by Andrew Vasquez
· 17 years ago
08b95a1
[SCSI] qla2xxx: Correct handling of AENs postings for vports.
by Seokmann Ju
· 17 years ago
3c39740
[SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event handling."
by Seokmann Ju
· 17 years ago
7853099
[SCSI] qla2xxx: Update version number to 8.02.01-k3.
by Andrew Vasquez
· 17 years ago
a7cd023
[SCSI] qla2xxx: Revert "qla2xxx: Validate mid-layer 'underflow' during check-condition handling."
by Andrew Vasquez
· 17 years ago
d2ba567
[SCSI] qla2xxx: Disable local-interrupts while polling for RISC status.
by Andrew Vasquez
· 17 years ago
68af081
[SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a firmware dump.
by Andrew Vasquez
· 17 years ago
fa0926d
[SCSI] qla2xxx: Don't depend on mailbox return values while enabling FCE tracing.
by Andrew Vasquez
· 17 years ago
6c2f527
[SCSI] qla2xxx: Convert vport_sem to a mutex
by matthias@kaehlcke.net
· 17 years ago
e1e82b6
[SCSI] qla2xxx: firmware semaphore to mutex
by Daniel Walker
· 17 years ago
0e973a2
[SCSI] qla2xxx: Correct locking within MSI-X interrupt handlers.
by Andrew Vasquez
· 17 years ago
fd9a29f
[SCSI] qla2xxx: Display driver version at module init-time.
by Andrew Vasquez
· 17 years ago
2f2fa13
[SCSI] qla2xxx: Return correct port_type to FC-transport for Vports.
by Shyam Sundar
· 17 years ago
a198c3d
[SCSI] qla2xxx: Update version number to 8.02.01-k2.
by Andrew Vasquez
· 17 years ago
666301e
[SCSI] qla2xxx: Correct regression in relogin code.
by Andrew Vasquez
· 17 years ago
c6852c4
[SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.
by Seokmann Ju
· 17 years ago
3b8117b
[SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() static
by Adrian Bunk
· 17 years ago
01ef66b
[SCSI] qla2xxx: qla_os.c, make 2 functions static
by Adrian Bunk
· 17 years ago
7e47e5c
[SCSI] qla2xxx: Re-register FDMI information after a LIP.
by Andrew Vasquez
· 17 years ago
0c23b85
[SCSI] qla2xxx: Correct SRB usage-after-completion/free issues.
by Andrew Vasquez
· 17 years ago
Next »