- a1c1e4e [SCSI] libfc: rearrange code in fc_disc_gpn_ft_resp() by Joe Eykholt · 16 years ago
- c356afd [SCSI] libfc: discovery restart sequence error fix by Joe Eykholt · 16 years ago
- 0f6c614 [SCSI] libfc: do not log off rports before or after discovery by Joe Eykholt · 16 years ago
- 8025b5d [SCSI] libfc: move rport_lookup into fc_rport.c by Joe Eykholt · 16 years ago
- 8345592 [SCSI] libfc: change to make remote port callback optional by Joe Eykholt · 16 years ago
- 19f97e3 [SCSI] libfc: have rport_create do a lookup for pre-existing rports first by Joe Eykholt · 16 years ago
- 48f0090 [SCSI] libfc: make rport module maintain the rport list by Joe Eykholt · 16 years ago
- b5cbf08 [SCSI] libfc: simplify fc_lport_rport_callback by Joe Eykholt · 16 years ago
- cdbe6df [SCSI] libfc: rport debug messages were printing pointer values by Joe Eykholt · 16 years ago
- b84c796 [SCSI] libfc: remove unused disc->delay element by Joe Eykholt · 16 years ago
- 786681b [SCSI] libfc: eliminate disc->event by Joe Eykholt · 16 years ago
- 00fea93 [SCSI] libfc: fix rport event race between READY and LOGO by Joe Eykholt · 16 years ago
- 9e9d045 [SCSI] libfc: don't create dummy (rogue) remote ports by Joe Eykholt · 16 years ago
- 4c0f62b [SCSI] libfc: rename rport event CREATED to READY by Joe Eykholt · 16 years ago
- 629f442 [SCSI] libfc: rearrange code in fc_rport_work by Joe Eykholt · 16 years ago
- f211fa5 [SCSI] libfc: make rport structure optional by Joe Eykholt · 16 years ago
- a46f327 [SCSI] libfc: change elsct to use FC_ID instead of rdata by Joe Eykholt · 16 years ago
- 9fb9d32 [SCSI] libfc: make fc_rport_priv the primary rport interface. by Joe Eykholt · 16 years ago
- 795d86f [SCSI] libfc: change interface for rport_create by Joe Eykholt · 16 years ago
- ab28f1f [SCSI] libfc: prepare to split off struct fc_rport_priv from fc_rport_libfc_priv by Joe Eykholt · 16 years ago
- 090eb6c [SCSI] fcoe: use rtnl mutex in place of hostlist lock by Chris Leech · 16 years ago
- 2e70e24 [SCSI] fcoe: Fix module ref count bug by adding NETDEV UNREGISTER handling by Chris Leech · 16 years ago
- c863df3 [SCSI] fcoe: move the host-list add/remove to keep out VN_Ports by Chris Leech · 16 years ago
- dfc1d0f [SCSI] fcoe: add mutex to protect create and destroy by Chris Leech · 16 years ago
- 54b649f [SCSI] fcoe: split out per interface setup by Chris Leech · 16 years ago
- 030f4e0 [SCSI] fcoe: fcoe_interface create, destroy and refcounting by Chris Leech · 16 years ago
- cb0a6ca [SCSI] fcoe: remove fcoe_interface->priv pointer by Chris Leech · 16 years ago
- 991cbb6 [SCSI] fcoe: move offload exchange manager pointer from fcoe_port to fcoe_interface by Chris Leech · 16 years ago
- 3fe9a0b [SCSI] fcoe: move FIP controller from fcoe_port to fcoe_interface by Chris Leech · 16 years ago
- 259ad85 [SCSI] fcoe: move packet handlers from fcoe_port to fcoe_interface by Chris Leech · 16 years ago
- 2502498 [SCSI] fcoe: move netdev to fcoe_interface by Chris Leech · 16 years ago
- 014f5c3 [SCSI] fcoe: Introduce and allocate fcoe_interface structure, 1:1 with net_device by Chris Leech · 16 years ago
- af7f85d [SCSI] fcoe: interface changes to fcoe_if_create and fcoe_if_destroy by Chris Leech · 16 years ago
- 36eb7fc [SCSI] fcoe: remove unnecessary list and lock initializations. by Joe Eykholt · 16 years ago
- 5892c32 [SCSI] fcoe: fix missing error check in call to fcoe_if_init by Chris Leech · 16 years ago
- a4b7cfa [SCSI] libfcoe: fcoe_ctlr_destroy use cancel_work_sync instead of flush_work by Chris Leech · 16 years ago
- 05cc739 [SCSI] fcoe: Add sysfs parameter to fcoe for minimum DDP read I/O size by Yi Zou · 16 years ago
- b2f0091 [SCSI] fcoe, libfc: fully makes use of per cpu exch pool and then removes em_lock by Vasu Dev · 16 years ago
- e4bc50b [SCSI] fcoe, libfc: adds per cpu exch pool within exchange manager(EM) by Vasu Dev · 16 years ago
- a69b06b [SCSI] fcoe: libfcoe: extra semicolon in CHECK_LOGGING macros causes compile error by Joe Eykholt · 16 years ago
- cd305ce [SCSI] libfc: Fix misleading debug statement by Robert Love · 16 years ago
- ee610c6 [SCSI] fcoe: Add format spacing to FCOE_NETDEV_DBG debug macro by Robert Love · 16 years ago
- 70b31c1 [SCSI] libiscsi, iscsi_tcp: check suspend bit before each call to xmit_task by Mike Christie · 16 years ago
- d1af8a3 [SCSI] iscsi_tcp: add new conn error to indicate tcp conn closed by Mike Christie · 16 years ago
- 632248a [SCSI] iscsi class: Add logging to scsi_transport_iscsi.c by Mike Christie · 16 years ago
- b06fc73 [SCSI] qla4xxx: Removed residual from overrun debug print by Mike Christie · 16 years ago
- 8afa143 [SCSI] libiscsi: handle immediate command rejections by Mike Christie · 16 years ago
- d3305f3 [SCSI] libiscsi: don't increment cmdsn if cmd is not sent by Mike Christie · 16 years ago
- 523eeac [SCSI] iscsi_tcp: Evaluate socket state in data_ready() by Hannes Reinecke · 16 years ago
- ac280b6 [SCSI] qla2xxx: Add asynchronous-login support. by Andrew Vasquez · 16 years ago
- cf53b06 [SCSI] qla2xxx: Generalize srb structure usage. by Andrew Vasquez · 16 years ago
- dc162b6 [SCSI] mpt2sas: Bump driver version 01.100.06.00 by Kashyap, Desai · 16 years ago
- 5b76858 [SCSI] mpt2sas: cleanup interrupt routine and config_request optimization by Kashyap, Desai · 16 years ago
- ed79f12 [SCSI] mpt2sas: Raid 10 Volume is showing as Raid 1E in dmesg by Kashyap, Desai · 16 years ago
- 34a03be [SCSI] mpt2sas: setting SDEV into RUNNING state from Interrupt context by Kashyap, Desai · 16 years ago
- cc0f520 [SCSI] mpt2sas: Removed wrapper funtions _scsih_link_change. by Kashyap, Desai · 16 years ago
- 155dd4c [SCSI] mpt2sas: Prevent sending command to FW while Host Reset by Kashyap, Desai · 16 years ago
- cd4e12e [SCSI] mpt2sas : Rescan topology from Interrupt context instead of work thread by Kashyap, Desai · 16 years ago
- 69cb487 [SCSI] stex: Add reset code for st_yel (v2) by Ed Lin · 16 years ago
- cdf69bb [SCSI] scsi_dh_rdac: add support for next generation of Dell PV array by Yanqing_Liu@Dell.com · 16 years ago
- 4dbfb54 [SCSI] scsi_dh: add two SUN devices to the list of devices supported by default by Chandra Seetharaman · 16 years ago
- 95a3639 [SCSI] fix bugs in scsi_vpd_inquiry() by James Bottomley · 16 years ago
- 5f91bb0 [SCSI] reservation conflict after timeout causes device to be taken offline by Michael Reed · 16 years ago
- edced19 [SCSI] nsp_cs: fix buf overflow by Jiri Slaby · 16 years ago
- a2cf8a6 [SCSI] ch: Check NULL for kmalloc() return by Davidlohr Bueso A · 16 years ago
- d688669 [SCSI] ibmvscsi: avoid unnecessary use of kzalloc_pool by Sage Weil · 16 years ago
- d430ddc [SCSI] qla2xxx: Update version number to 8.03.01-k5 by Giridhar Malavali · 16 years ago
- 7163ea8 [SCSI] qla2xxx: Fix to ensure driver works in sinlge queue mode if multiqueue fails by Anirban Chakraborty · 16 years ago
- 09ccbcc [SCSI] qla2xxx: Correct display of vp_count in debug printk. by Andrew Vasquez · 16 years ago
- eb94114 [SCSI] qla2xxx: Fix a bug that clears the interrupt status register for the base queue by Anirban Chakraborty · 16 years ago
- 80de7ef [SCSI] qla2xxx: ISP21xx/22xx do not support FDMI registrations. by Andrew Vasquez · 16 years ago
- f9e899e [SCSI] qla2xxx: Pad IOCB structure for size requirements. by Shyam Sundar · 16 years ago
- a2d301e [SCSI] qla2xxx: Handle RSCN's per master/slave vn-port basis. by Santosh Vernekar · 16 years ago
- 4b78524 [SCSI] qla2xxx: Process DPC requests within valid Fabric topologies. by Lalit Chandivade · 16 years ago
- faadc5e [SCSI] qla2xxx: Mark all devices lost on loss of fc port. by Santosh Vernekar · 16 years ago
- 55903b9 [SCSI] qla2xxx: Skip RSCN processing on vha if event is global. by Santosh Vernekar · 16 years ago
- 9764ff8 [SCSI] qla2xxx: Correctly handle 'global port-unavailable' AEN. by Andrew Vasquez · 16 years ago
- 8f1f3ec [SCSI] qla2xxx: Pass the command's data residual to upper-layer callers. by Ravi Anand · 16 years ago
- 14d9cb5 [SCSI] scsi_dh: Provide set_params interface in emc device handler by Chandra Seetharaman · 16 years ago
- 18ee70c [SCSI] scsi_dh: add the interface scsi_dh_set_params() by Chandra Seetharaman · 16 years ago
- 21fab1d [SCSI] ses: update enclosure data on hot add by James Bottomley · 16 years ago
- 43d8eb9 [SCSI] ses: add support for enclosure component hot removal by James Bottomley · 16 years ago
- 163f52b [SCSI] ses: fix hotplug with multiple devices and expanders by James Bottomley · 16 years ago
- 0124ca9 [SCSI] ipr: fix buffer overflow by Brian King · 16 years ago
- c19dcd0 [SCSI] bnx2i : Fix "cid #n not valid" issue by Anil Veerabhadrappa · 16 years ago
- 534cc9c [SCSI] bnx2i : Fix command session number jump issue seen during cable pull test by Anil Veerabhadrappa · 16 years ago
- 1d1b88d [SCSI] fcoe: removes phys_dev and renames real_dev to netdev. by Vasu Dev · 16 years ago
- 53fcfbb [SCSI] libfc: Remove page flags check for sglist by Yi Zou · 16 years ago
- 537029f [SCSI] libfc: Remove FC_FRAME_SG_LEN in fc_fcp_send_data by Yi Zou · 16 years ago
- 15a521b [SCSI] fcoe: Remove ifdef for NETIF_F_FCOE_CRC and NETIF_F_FSO by Yi Zou · 16 years ago
- d717968 [SCSI] fcoe, libfc: adds offload EM per eth device with only single xid range per EM by Vasu Dev · 16 years ago
- e8af4d4 [SCSI] fcoe: modifies fcoe_hostlist_lock uses as prep work to add shared offload EM by Vasu Dev · 16 years ago
- 52ff878 [SCSI] fcoe, fnic, libfc: modifies current code paths to use EM anchor list by Vasu Dev · 16 years ago
- d459b7e [SCSI] libfc: Remove the FC_EM_DBG macro by Robert Love · 16 years ago
- 9631609 [SCSI] fcoe, libfc: adds exchange manager(EM) anchor list per lport and related APIs by Vasu Dev · 16 years ago
- 201e579 [SCSI] libfc: fix: cancel rport retry timer by Joe Eykholt · 16 years ago
- 5f7ea3b [SCSI] libfc: fc_rport_logoff should not drop the lock by Joe Eykholt · 16 years ago
- 1419405 [SCSI] libfc: rename rport state "NONE" to "DELETE". by Joe Eykholt · 16 years ago
- 84b0544 [SCSI] libfc: fix WARNING from fc_seq_start_next on closed exchanges by Joe Eykholt · 16 years ago
- e9ba8b4 [SCSI] libfc: in fc_lport_destroy, flush rports after turning off link by Joe Eykholt · 16 years ago