1. 5bda272 Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN by Mike Frysinger · 17 years ago
  2. bd628bd Blackfin arch: fixup warnings with the new cplb saved values by Mike Frysinger · 17 years ago
  3. b06dcee Blackfin arch: Remove bad and usless code by Michael Hennerich · 17 years ago
  4. 2eb74ae Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527 by Bryan Wu · 17 years ago
  5. ca56d9a Blackfin arch: Fix typo. it should be _outsw_8 by Bryan Wu · 17 years ago
  6. f086f23 Blackfin arch: Cleanup no functional changes by Michael Hennerich · 17 years ago
  7. e23a5f6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 by Linus Torvalds · 17 years ago
  8. ecb9567 Blackfin arch: update boards defconfig files by Michael Hennerich · 17 years ago
  9. 5906967 Blackfin arch: IO Port functions to read/write unalligned memory by Michael Hennerich · 17 years ago
  10. 86ad793 Blackfin arch: enable a choice to provide 4M DMA memory by Cliff Cai · 17 years ago
  11. c6c6f75 Blackfin arch: cleanup the icplb/dcplb multiple hit checks by Mike Frysinger · 17 years ago
  12. 803a8d2 Blackfin arch: Add workaround to read edge triggered GPIOs by Michael Hennerich · 17 years ago
  13. 5ce998c Blackfin arch: Check for Anomaly 05000182 by Michael Hennerich · 17 years ago
  14. f52111b [PATCH] take init_files to fs/file.c by Al Viro · 17 years ago
  15. 9cd9c61 [Blackfin] arch: rename bf5xx-flash to bfin-async-flash by Mike Frysinger · 17 years ago
  16. 45b3947 [Blackfin] arch: Blackfin checksum annotations by Al Viro · 17 years ago
  17. 24fbacc i2c: Clean up Blackfin BF527 I2C device declarations by Jean Delvare · 17 years ago
  18. e4f7c0bf [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined by Mike Frysinger · 17 years ago
  19. b964c59 [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined by Mike Frysinger · 17 years ago
  20. 197fba5 [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver by Michael Hennerich · 17 years ago
  21. d732369 [Blackfin] arch: Set spi flash partition on bf527 as like bf548. by Grace Pan · 17 years ago
  22. 96a87e2 [Blackfin] arch: fix bug - Remove module will not free L1 memory used by Meihui Fan · 17 years ago
  23. 60c0595 [Blackfin] arch: fix wrong header name in comment by Mike Frysinger · 17 years ago
  24. b9c9e78 [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount by Michael Hennerich · 17 years ago
  25. 7226868 [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit by Bryan Wu · 17 years ago
  26. d7e5dd4 [Blackfin] arch: Add physmap partition for BF527-EZkit by Michael Hennerich · 17 years ago
  27. 0893f12 [Blackfin] arch: fix gdb testing regression by Bernd Schmidt · 17 years ago
  28. 8513c42 [Blackfin] arch: disable single stepping when delivering a signal by Bernd Schmidt · 17 years ago
  29. 7d39270 [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c. by Bernd Schmidt · 17 years ago
  30. ddb3f00 [Blackfin] arch: In the double fault handler, set up the PT_RETI slot by Bernd Schmidt · 17 years ago
  31. 1bfb4b2 [Blackfin] arch: Support for CPU_FREQ and NOHZ by Vitja Makarov · 17 years ago
  32. 14b0320 [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support by Michael Hennerich · 17 years ago
  33. 19d6d7d [Blackfin] arch: fix bug - breaking the atomic sections code. by Bernd Schmidt · 17 years ago
  34. 67dea02 [Blackfin] arch: Cleanup Kconfig, fix comment and make sure we exclude CCLK=SCLK for some configurations by Michael Hennerich · 17 years ago
  35. d35c7b0 unified (weak) sys_pipe implementation by Ulrich Drepper · 17 years ago
  36. 3760f73 i2c: Convert most new-style drivers to use module aliasing by Jean Delvare · 17 years ago
  37. 5544b9e blackfin: use kbuild.h instead of defining macros in asm-macros.c by Christoph Lameter · 17 years ago
  38. ecd0fa9 Remove the macro get_personality by WANG Cong · 17 years ago
  39. 0c11700 [Blackfin] arch: add include/boot .gitignore files by Mike Frysinger · 17 years ago
  40. e6c91b6 [Blackfin] arch: Functional power management support: Add support for cpu frequency scaling by Michael Hennerich · 17 years ago
  41. fe44193 [Blackfin] arch: Functional power management support: Remove broken cpu frequency scaling drivers by Michael Hennerich · 17 years ago
  42. 2fb6cb4 [Blackfin] arch: Add a warning about the value of CLKIN. by Sonic Zhang · 17 years ago
  43. 1e78042 [Blackfin] arch: take DDR DEVWD into consideration as well for BF548 by Michael Hennerich · 17 years ago
  44. 5d750b9 [Blackfin] arch: Remove the circular buffering mechanism for exceptions by Bernd Schmidt · 17 years ago
  45. 00d205a [Blackfin] arch: lose unnecessary dependency on CONFIG_BFIN_ICACHE for MPU by Bernd Schmidt · 17 years ago
  46. 565c0d3 [Blackfin] arch: fix bug - before assign new channel to the map register, need clear the bits first. by Graf Yang · 17 years ago
  47. 5be36d2 [Blackfin] arch: add Blackfin on-chip SIR IrDA driver support by Graf Yang · 17 years ago
  48. 37b6972 [Blackfin] arch: BF54x memsizes are in mbits, not mbytes by Mike Frysinger · 17 years ago
  49. 7f1c906 [Blackfin] arch: try to remove condition that causes double fault, by checking current before it gets dereferenced by Robin Getz · 17 years ago
  50. 8e9d5c7 [Blackfin] arch: Add platform support for MTD DATAFLASH by Michael Hennerich · 17 years ago
  51. 5f004c2 [Blackfin] arch: reorganize some of the board-customization options so that similar things are together and only available as needed by Mike Frysinger · 17 years ago
  52. affee2b [Blackfin] arch: Allow concurrent use of GPIO and GPIO IRQ by Michael Hennerich · 17 years ago
  53. a086ee2 [Blackfin] arch: detect the memory available in the system on the fly by default by Mike Frysinger · 17 years ago
  54. 4bea8b2 [Blackfin] arch: add implicit icplb for the bootrom so we can use the utility functions in the kernel by Mike Frysinger · 17 years ago
  55. ac76d88 [Blackfin] arch: Adjust the u-boot and kernel image partition size in mtd device. by Grace Pan · 17 years ago
  56. bc6e0fa [Blackfin] arch: use the same style for missing L1 sections by Mike Frysinger · 17 years ago
  57. 9f8e895 [Blackfin] arch: now that we can panic() early, dont need the delayed L1 overflow check by Mike Frysinger · 17 years ago
  58. b85b82d [Blackfin] arch: fix bug - Section data_l1_cacheline_aligned should be defined in link script of kernel by Sonic Zhang · 17 years ago
  59. 253bcf4 [Blackfin] arch: Add a little bit more runtime info for MPU by Robin Getz · 17 years ago
  60. 16428a4 [Blackfin] arch: make the mask explicit rather than writing a negative number in hex by Mike Frysinger · 17 years ago
  61. 4e354b5 [Blackfin] arch: cplb-mpu code clean up by Mike Frysinger · 17 years ago
  62. 7795566 [Blackfin] arch: Give the DMA base registers a more descriptive name by Bernd Schmidt · 17 years ago
  63. ac86a97 [Blackfin] arch: Consistently export base_addr for all Blackfin variants. by Bernd Schmidt · 17 years ago
  64. 37fa242 [Blackfin] arch: Allow AD1836A board to be connected, either to SPORT2 or SPORT3. by Bernd Schmidt · 17 years ago
  65. 764cb81 [Blackfin] arch: actually implement get_cycles function by Mike Frysinger · 17 years ago
  66. 8cab028 [Blackfin] arch: add boot messages to quickly distinguish between MPU/NOMPU settings by Mike Frysinger · 17 years ago
  67. 3132b58 [Blackfin] arch: theres no need to declare ram{end,start,base} in the head.S files by Mike Frysinger · 17 years ago
  68. 8b6eb47 [Blackfin] arch: remove duplicated prototypes for internal cplb structures from the global blackfin header by Mike Frysinger · 17 years ago
  69. 6817937 [Blackfin] arch: declare list of peripherals as const since we dont modify the incoming array by Mike Frysinger · 17 years ago
  70. 5d1617b [Blackfin] arch: merge ip0x-specific board changes by Mike Frysinger · 17 years ago
  71. f950f60 [Blackfin] arch: USB header files are now located under linux/usb/. by Peter Korsgaard · 17 years ago
  72. 6ed8394 [Blackfin] arch: Resolve the clash issue of UART defines between blackfin headers and include/linux/serial_reg. by Graf Yang · 17 years ago
  73. db68254 [Blackfin] arch: Apply Bluetechnix vendor patch by Michael Hennerich · 17 years ago
  74. d5adb02 [Blackfin] arch: This allows XIP to work with FD-PIC. by Bernd Schmidt · 17 years ago
  75. 1ebc723 [Blackfin] arch: support the reserved memory region in the MPU code by Bernd Schmidt · 17 years ago
  76. d56daae [Blackfin] arch: fix bug - a crash on bootup with CONFIG_MPU on the BF548 by Bernd Schmidt · 17 years ago
  77. 697a9d6 [Blackfin] arch: a rather old performance improvement for the signal handling code by Bernd Schmidt · 17 years ago
  78. 5af29f5 [Blackfin] arch: finish removing remnants of old BF537_PORT_H option of Blackfin EMAC driver by Mike Frysinger · 17 years ago
  79. 7b8aa36 [Blackfin] arch: LARGE_ALLOCS was dropped along the way ... bring Blackfin in line by Mike Frysinger · 17 years ago
  80. 2973951 [Blackfin] arch: we no longer use BFIN_{SINGLE,DUAL}_CORE in our source by Mike Frysinger · 17 years ago
  81. 1bee1a6 [Blackfin] arch: boards and machines defconfig updates by Bryan Wu · 17 years ago
  82. b85d858 [Blackfin] arch: __FUNCTION__ is gcc-specific, use __func__ by Harvey Harrison · 17 years ago
  83. c5b50df [Blackfin] arch: fix bug - make sure we check the right L1 length by Meihui Fan · 17 years ago
  84. 6eceb0d [Blackfin] arch: add support for the rest of the gptimers on the BF54x by Meihui Fan · 17 years ago
  85. 0e184c6 [Blackfin] arch: relocate MAX_SWITCH_{D,I}_CPLBS from the header to the file where it actually gets used. by Mike Frysinger · 17 years ago
  86. 618835a [Blackfin] arch: MEM_ADD_WIDTH only gets used when reprogramming clocks, so dont bother exposing it in the menu normally by Mike Frysinger · 17 years ago
  87. 6a42a91 [Blackfin] arch: update reboot code to match latest info (really just copy from u-boot) by Mike Frysinger · 17 years ago
  88. b4bb68f [Blackfin] arch: fix bug - Make the MPU code aware of the async banks and the uncached DMA area. by Bernd Schmidt · 17 years ago
  89. 2a0c4fd [Blackfin] arch: fix bug - when using trace buffer with CONFIG_MPU enabled. by Bernd Schmidt · 17 years ago
  90. dbfe44f [Blackfin] arch: fix up - CONFIG_BLKFIN_WT was renamed CONFIG_BFIN_WT while the MPU code was out-of-tree. by Bernd Schmidt · 17 years ago
  91. 904656c [Blackfin] arch: fix bug - grab locks when not atomic by Robin Getz · 17 years ago
  92. 9a62ca4 [Blackfin] arch: fix bug - when we crash, current is not valid by Robin Getz · 17 years ago
  93. 81d9c7f [Blackfin] arch: add i2c board info struct and move to new-style i2c interface by Bryan Wu · 17 years ago
  94. d171c23 [Blackfin] arch: fix up gpio code style -- no functional changes by Mike Frysinger · 17 years ago
  95. f85c4ab [Blackfin] arch: dump the stack before printing out an error otherwise the stack dump is useless as it shows us tracing through printk by Mike Frysinger · 17 years ago
  96. 793dc27 [Blackfin] arch: conditionally enable flash resources since it requests the async memory bank by Mike Frysinger · 17 years ago
  97. 2e8d796 [Blackfin] arch: add code to initialize globals declared in linux/bootmem.h: max_pfn, max_low_pfn, min_low_pfn. by Yi Li · 17 years ago
  98. 9df7a8f [Blackfin] arch: remove NOTES from linker script by Bernd Schmidt · 17 years ago
  99. 56ce835 [Blackfin] arch: add twi resources to CM_BF537 board as reported by Servaes Joordens by Mike Frysinger · 17 years ago
  100. f692940 [Blackfin] arch: declare CHECKFLAGS to make sparse output more readable by Mike Frysinger · 17 years ago