| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "oat_file_assistant.h" |
| |
| #include <fcntl.h> |
| #ifdef __linux__ |
| #include <sys/sendfile.h> |
| #else |
| #include <sys/socket.h> |
| #endif |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <unistd.h> |
| |
| #include <set> |
| |
| #include "base/logging.h" |
| #include "base/stringprintf.h" |
| #include "compiler_filter.h" |
| #include "class_linker.h" |
| #include "gc/heap.h" |
| #include "gc/space/image_space.h" |
| #include "image.h" |
| #include "oat.h" |
| #include "os.h" |
| #include "runtime.h" |
| #include "scoped_thread_state_change.h" |
| #include "ScopedFd.h" |
| #include "utils.h" |
| |
| namespace art { |
| |
| std::ostream& operator << (std::ostream& stream, const OatFileAssistant::OatStatus status) { |
| switch (status) { |
| case OatFileAssistant::kOatOutOfDate: |
| stream << "kOatOutOfDate"; |
| break; |
| case OatFileAssistant::kOatUpToDate: |
| stream << "kOatUpToDate"; |
| break; |
| case OatFileAssistant::kOatNeedsRelocation: |
| stream << "kOatNeedsRelocation"; |
| break; |
| default: |
| UNREACHABLE(); |
| } |
| |
| return stream; |
| } |
| |
| OatFileAssistant::OatFileAssistant(const char* dex_location, |
| const InstructionSet isa, |
| bool profile_changed, |
| bool load_executable) |
| : OatFileAssistant(dex_location, nullptr, isa, profile_changed, load_executable) |
| { } |
| |
| OatFileAssistant::OatFileAssistant(const char* dex_location, |
| const char* oat_location, |
| const InstructionSet isa, |
| bool profile_changed, |
| bool load_executable) |
| : isa_(isa), profile_changed_(profile_changed), load_executable_(load_executable) { |
| CHECK(dex_location != nullptr) << "OatFileAssistant: null dex location"; |
| dex_location_.assign(dex_location); |
| |
| if (load_executable_ && isa != kRuntimeISA) { |
| LOG(WARNING) << "OatFileAssistant: Load executable specified, " |
| << "but isa is not kRuntimeISA. Will not attempt to load executable."; |
| load_executable_ = false; |
| } |
| |
| // If the user gave a target oat location, save that as the cached oat |
| // location now so we won't try to construct the default location later. |
| if (oat_location != nullptr) { |
| cached_oat_file_name_ = std::string(oat_location); |
| cached_oat_file_name_attempted_ = true; |
| cached_oat_file_name_found_ = true; |
| } |
| } |
| |
| OatFileAssistant::~OatFileAssistant() { |
| // Clean up the lock file. |
| if (flock_.HasFile()) { |
| unlink(flock_.GetFile()->GetPath().c_str()); |
| } |
| } |
| |
| bool OatFileAssistant::IsInBootClassPath() { |
| // Note: We check the current boot class path, regardless of the ISA |
| // specified by the user. This is okay, because the boot class path should |
| // be the same for all ISAs. |
| // TODO: Can we verify the boot class path is the same for all ISAs? |
| Runtime* runtime = Runtime::Current(); |
| ClassLinker* class_linker = runtime->GetClassLinker(); |
| const auto& boot_class_path = class_linker->GetBootClassPath(); |
| for (size_t i = 0; i < boot_class_path.size(); i++) { |
| if (boot_class_path[i]->GetLocation() == dex_location_) { |
| VLOG(oat) << "Dex location " << dex_location_ << " is in boot class path"; |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool OatFileAssistant::Lock(std::string* error_msg) { |
| CHECK(error_msg != nullptr); |
| CHECK(!flock_.HasFile()) << "OatFileAssistant::Lock already acquired"; |
| |
| if (OatFileName() == nullptr) { |
| *error_msg = "Failed to determine lock file"; |
| return false; |
| } |
| std::string lock_file_name = *OatFileName() + ".flock"; |
| |
| if (!flock_.Init(lock_file_name.c_str(), error_msg)) { |
| unlink(lock_file_name.c_str()); |
| return false; |
| } |
| return true; |
| } |
| |
| bool OatFileAssistant::OatFileCompilerFilterIsOkay(CompilerFilter::Filter target) { |
| const OatFile* oat_file = GetOatFile(); |
| if (oat_file != nullptr) { |
| CompilerFilter::Filter current = oat_file->GetCompilerFilter(); |
| return CompilerFilter::IsAsGoodAs(current, target); |
| } |
| return false; |
| } |
| |
| bool OatFileAssistant::OdexFileCompilerFilterIsOkay(CompilerFilter::Filter target) { |
| const OatFile* odex_file = GetOdexFile(); |
| if (odex_file != nullptr) { |
| CompilerFilter::Filter current = odex_file->GetCompilerFilter(); |
| return CompilerFilter::IsAsGoodAs(current, target); |
| } |
| return false; |
| } |
| |
| OatFileAssistant::DexOptNeeded OatFileAssistant::GetDexOptNeeded(CompilerFilter::Filter target) { |
| bool compilation_desired = CompilerFilter::IsBytecodeCompilationEnabled(target); |
| |
| // See if the oat file is in good shape as is. |
| bool oat_okay = OatFileCompilerFilterIsOkay(target); |
| if (oat_okay) { |
| if (compilation_desired) { |
| if (OatFileIsUpToDate()) { |
| return kNoDexOptNeeded; |
| } |
| } else { |
| if (!OatFileIsOutOfDate()) { |
| return kNoDexOptNeeded; |
| } |
| } |
| } |
| |
| // See if the odex file is in good shape as is. |
| bool odex_okay = OdexFileCompilerFilterIsOkay(target); |
| if (odex_okay) { |
| if (compilation_desired) { |
| if (OdexFileIsUpToDate()) { |
| return kNoDexOptNeeded; |
| } |
| } else { |
| if (!OdexFileIsOutOfDate()) { |
| return kNoDexOptNeeded; |
| } |
| } |
| } |
| |
| // See if we can get an up-to-date file by running patchoat. |
| if (compilation_desired) { |
| if (odex_okay && OdexFileNeedsRelocation() && OdexFileHasPatchInfo()) { |
| return kPatchOatNeeded; |
| } |
| |
| if (oat_okay && OatFileNeedsRelocation() && OatFileHasPatchInfo()) { |
| return kSelfPatchOatNeeded; |
| } |
| } |
| |
| // We can only run dex2oat if there are original dex files. |
| return HasOriginalDexFiles() ? kDex2OatNeeded : kNoDexOptNeeded; |
| } |
| |
| // Figure out the currently specified compile filter option in the runtime. |
| // Returns true on success, false if the compiler filter is invalid, in which |
| // case error_msg describes the problem. |
| static bool GetRuntimeCompilerFilterOption(CompilerFilter::Filter* filter, |
| std::string* error_msg) { |
| CHECK(filter != nullptr); |
| CHECK(error_msg != nullptr); |
| |
| *filter = CompilerFilter::kDefaultCompilerFilter; |
| for (StringPiece option : Runtime::Current()->GetCompilerOptions()) { |
| if (option.starts_with("--compiler-filter=")) { |
| const char* compiler_filter_string = option.substr(strlen("--compiler-filter=")).data(); |
| if (!CompilerFilter::ParseCompilerFilter(compiler_filter_string, filter)) { |
| *error_msg = std::string("Unknown --compiler-filter value: ") |
| + std::string(compiler_filter_string); |
| return false; |
| } |
| } |
| } |
| return true; |
| } |
| |
| bool OatFileAssistant::IsUpToDate() { |
| return OatFileIsUpToDate() || OdexFileIsUpToDate(); |
| } |
| |
| OatFileAssistant::ResultOfAttemptToUpdate |
| OatFileAssistant::MakeUpToDate(std::string* error_msg) { |
| CompilerFilter::Filter target; |
| if (!GetRuntimeCompilerFilterOption(&target, error_msg)) { |
| return kUpdateNotAttempted; |
| } |
| |
| switch (GetDexOptNeeded(target)) { |
| case kNoDexOptNeeded: return kUpdateSucceeded; |
| case kDex2OatNeeded: return GenerateOatFile(error_msg); |
| case kPatchOatNeeded: return RelocateOatFile(OdexFileName(), error_msg); |
| case kSelfPatchOatNeeded: return RelocateOatFile(OatFileName(), error_msg); |
| } |
| UNREACHABLE(); |
| } |
| |
| std::unique_ptr<OatFile> OatFileAssistant::GetBestOatFile() { |
| // The best oat files are, in descending order of bestness: |
| // 1. Properly relocated files. These may be opened executable. |
| // 2. Not out-of-date files that are already opened non-executable. |
| // 3. Not out-of-date files that we must reopen non-executable. |
| |
| if (OatFileIsUpToDate()) { |
| oat_file_released_ = true; |
| return std::move(cached_oat_file_); |
| } |
| |
| if (OdexFileIsUpToDate()) { |
| oat_file_released_ = true; |
| return std::move(cached_odex_file_); |
| } |
| |
| VLOG(oat) << "Oat File Assistant: No relocated oat file found," |
| << " attempting to fall back to interpreting oat file instead."; |
| |
| if (!OatFileIsOutOfDate() && !OatFileIsExecutable()) { |
| oat_file_released_ = true; |
| return std::move(cached_oat_file_); |
| } |
| |
| if (!OdexFileIsOutOfDate() && !OdexFileIsExecutable()) { |
| oat_file_released_ = true; |
| return std::move(cached_odex_file_); |
| } |
| |
| if (!OatFileIsOutOfDate()) { |
| load_executable_ = false; |
| ClearOatFileCache(); |
| if (!OatFileIsOutOfDate()) { |
| CHECK(!OatFileIsExecutable()); |
| oat_file_released_ = true; |
| return std::move(cached_oat_file_); |
| } |
| } |
| |
| if (!OdexFileIsOutOfDate()) { |
| load_executable_ = false; |
| ClearOdexFileCache(); |
| if (!OdexFileIsOutOfDate()) { |
| CHECK(!OdexFileIsExecutable()); |
| oat_file_released_ = true; |
| return std::move(cached_odex_file_); |
| } |
| } |
| |
| return std::unique_ptr<OatFile>(); |
| } |
| |
| std::vector<std::unique_ptr<const DexFile>> OatFileAssistant::LoadDexFiles( |
| const OatFile& oat_file, const char* dex_location) { |
| std::vector<std::unique_ptr<const DexFile>> dex_files; |
| |
| // Load the primary dex file. |
| std::string error_msg; |
| const OatFile::OatDexFile* oat_dex_file = oat_file.GetOatDexFile( |
| dex_location, nullptr, false); |
| if (oat_dex_file == nullptr) { |
| LOG(WARNING) << "Attempt to load out-of-date oat file " |
| << oat_file.GetLocation() << " for dex location " << dex_location; |
| return std::vector<std::unique_ptr<const DexFile>>(); |
| } |
| |
| std::unique_ptr<const DexFile> dex_file = oat_dex_file->OpenDexFile(&error_msg); |
| if (dex_file.get() == nullptr) { |
| LOG(WARNING) << "Failed to open dex file from oat dex file: " << error_msg; |
| return std::vector<std::unique_ptr<const DexFile>>(); |
| } |
| dex_files.push_back(std::move(dex_file)); |
| |
| // Load secondary multidex files |
| for (size_t i = 1; ; i++) { |
| std::string secondary_dex_location = DexFile::GetMultiDexLocation(i, dex_location); |
| oat_dex_file = oat_file.GetOatDexFile(secondary_dex_location.c_str(), nullptr, false); |
| if (oat_dex_file == nullptr) { |
| // There are no more secondary dex files to load. |
| break; |
| } |
| |
| dex_file = oat_dex_file->OpenDexFile(&error_msg); |
| if (dex_file.get() == nullptr) { |
| LOG(WARNING) << "Failed to open dex file from oat dex file: " << error_msg; |
| return std::vector<std::unique_ptr<const DexFile>>(); |
| } |
| dex_files.push_back(std::move(dex_file)); |
| } |
| return dex_files; |
| } |
| |
| bool OatFileAssistant::HasOriginalDexFiles() { |
| // Ensure GetRequiredDexChecksum has been run so that |
| // has_original_dex_files_ is initialized. We don't care about the result of |
| // GetRequiredDexChecksum. |
| GetRequiredDexChecksum(); |
| return has_original_dex_files_; |
| } |
| |
| const std::string* OatFileAssistant::OdexFileName() { |
| if (!cached_odex_file_name_attempted_) { |
| cached_odex_file_name_attempted_ = true; |
| |
| std::string error_msg; |
| cached_odex_file_name_found_ = DexFilenameToOdexFilename( |
| dex_location_, isa_, &cached_odex_file_name_, &error_msg); |
| if (!cached_odex_file_name_found_) { |
| // If we can't figure out the odex file, we treat it as if the odex |
| // file was inaccessible. |
| LOG(WARNING) << "Failed to determine odex file name: " << error_msg; |
| } |
| } |
| return cached_odex_file_name_found_ ? &cached_odex_file_name_ : nullptr; |
| } |
| |
| bool OatFileAssistant::OdexFileExists() { |
| return GetOdexFile() != nullptr; |
| } |
| |
| OatFileAssistant::OatStatus OatFileAssistant::OdexFileStatus() { |
| if (OdexFileIsOutOfDate()) { |
| return kOatOutOfDate; |
| } |
| if (OdexFileIsUpToDate()) { |
| return kOatUpToDate; |
| } |
| return kOatNeedsRelocation; |
| } |
| |
| bool OatFileAssistant::OdexFileIsOutOfDate() { |
| if (!odex_file_is_out_of_date_attempted_) { |
| odex_file_is_out_of_date_attempted_ = true; |
| const OatFile* odex_file = GetOdexFile(); |
| if (odex_file == nullptr) { |
| cached_odex_file_is_out_of_date_ = true; |
| } else { |
| cached_odex_file_is_out_of_date_ = GivenOatFileIsOutOfDate(*odex_file); |
| } |
| } |
| return cached_odex_file_is_out_of_date_; |
| } |
| |
| bool OatFileAssistant::OdexFileNeedsRelocation() { |
| return OdexFileStatus() == kOatNeedsRelocation; |
| } |
| |
| bool OatFileAssistant::OdexFileIsUpToDate() { |
| if (!odex_file_is_up_to_date_attempted_) { |
| odex_file_is_up_to_date_attempted_ = true; |
| const OatFile* odex_file = GetOdexFile(); |
| if (odex_file == nullptr) { |
| cached_odex_file_is_up_to_date_ = false; |
| } else { |
| cached_odex_file_is_up_to_date_ = GivenOatFileIsUpToDate(*odex_file); |
| } |
| } |
| return cached_odex_file_is_up_to_date_; |
| } |
| |
| CompilerFilter::Filter OatFileAssistant::OdexFileCompilerFilter() { |
| const OatFile* odex_file = GetOdexFile(); |
| CHECK(odex_file != nullptr); |
| |
| return odex_file->GetCompilerFilter(); |
| } |
| std::string OatFileAssistant::ArtFileName(const OatFile* oat_file) const { |
| const std::string oat_file_location = oat_file->GetLocation(); |
| // Replace extension with .art |
| const size_t last_ext = oat_file_location.find_last_of('.'); |
| if (last_ext == std::string::npos) { |
| LOG(ERROR) << "No extension in oat file " << oat_file_location; |
| return std::string(); |
| } |
| return oat_file_location.substr(0, last_ext) + ".art"; |
| } |
| |
| const std::string* OatFileAssistant::OatFileName() { |
| if (!cached_oat_file_name_attempted_) { |
| cached_oat_file_name_attempted_ = true; |
| |
| // Compute the oat file name from the dex location. |
| // TODO: The oat file assistant should be the definitive place for |
| // determining the oat file name from the dex location, not |
| // GetDalvikCacheFilename. |
| std::string cache_dir = StringPrintf("%s%s", |
| DalvikCacheDirectory().c_str(), GetInstructionSetString(isa_)); |
| std::string error_msg; |
| cached_oat_file_name_found_ = GetDalvikCacheFilename(dex_location_.c_str(), |
| cache_dir.c_str(), &cached_oat_file_name_, &error_msg); |
| if (!cached_oat_file_name_found_) { |
| // If we can't determine the oat file name, we treat the oat file as |
| // inaccessible. |
| LOG(WARNING) << "Failed to determine oat file name for dex location " |
| << dex_location_ << ": " << error_msg; |
| } |
| } |
| return cached_oat_file_name_found_ ? &cached_oat_file_name_ : nullptr; |
| } |
| |
| bool OatFileAssistant::OatFileExists() { |
| return GetOatFile() != nullptr; |
| } |
| |
| OatFileAssistant::OatStatus OatFileAssistant::OatFileStatus() { |
| if (OatFileIsOutOfDate()) { |
| return kOatOutOfDate; |
| } |
| if (OatFileIsUpToDate()) { |
| return kOatUpToDate; |
| } |
| return kOatNeedsRelocation; |
| } |
| |
| bool OatFileAssistant::OatFileIsOutOfDate() { |
| if (!oat_file_is_out_of_date_attempted_) { |
| oat_file_is_out_of_date_attempted_ = true; |
| const OatFile* oat_file = GetOatFile(); |
| if (oat_file == nullptr) { |
| cached_oat_file_is_out_of_date_ = true; |
| } else { |
| cached_oat_file_is_out_of_date_ = GivenOatFileIsOutOfDate(*oat_file); |
| } |
| } |
| return cached_oat_file_is_out_of_date_; |
| } |
| |
| bool OatFileAssistant::OatFileNeedsRelocation() { |
| return OatFileStatus() == kOatNeedsRelocation; |
| } |
| |
| bool OatFileAssistant::OatFileIsUpToDate() { |
| if (!oat_file_is_up_to_date_attempted_) { |
| oat_file_is_up_to_date_attempted_ = true; |
| const OatFile* oat_file = GetOatFile(); |
| if (oat_file == nullptr) { |
| cached_oat_file_is_up_to_date_ = false; |
| } else { |
| cached_oat_file_is_up_to_date_ = GivenOatFileIsUpToDate(*oat_file); |
| } |
| } |
| return cached_oat_file_is_up_to_date_; |
| } |
| |
| CompilerFilter::Filter OatFileAssistant::OatFileCompilerFilter() { |
| const OatFile* oat_file = GetOatFile(); |
| CHECK(oat_file != nullptr); |
| |
| return oat_file->GetCompilerFilter(); |
| } |
| |
| OatFileAssistant::OatStatus OatFileAssistant::GivenOatFileStatus(const OatFile& file) { |
| // TODO: This could cause GivenOatFileIsOutOfDate to be called twice, which |
| // is more work than we need to do. If performance becomes a concern, and |
| // this method is actually called, this should be fixed. |
| if (GivenOatFileIsOutOfDate(file)) { |
| return kOatOutOfDate; |
| } |
| if (GivenOatFileIsUpToDate(file)) { |
| return kOatUpToDate; |
| } |
| return kOatNeedsRelocation; |
| } |
| |
| bool OatFileAssistant::GivenOatFileIsOutOfDate(const OatFile& file) { |
| // Verify the dex checksum. |
| // Note: GetOatDexFile will return null if the dex checksum doesn't match |
| // what we provide, which verifies the primary dex checksum for us. |
| const uint32_t* dex_checksum_pointer = GetRequiredDexChecksum(); |
| const OatFile::OatDexFile* oat_dex_file = file.GetOatDexFile( |
| dex_location_.c_str(), dex_checksum_pointer, false); |
| if (oat_dex_file == nullptr) { |
| return true; |
| } |
| |
| // Verify the dex checksums for any secondary multidex files |
| for (size_t i = 1; ; i++) { |
| std::string secondary_dex_location |
| = DexFile::GetMultiDexLocation(i, dex_location_.c_str()); |
| const OatFile::OatDexFile* secondary_oat_dex_file |
| = file.GetOatDexFile(secondary_dex_location.c_str(), nullptr, false); |
| if (secondary_oat_dex_file == nullptr) { |
| // There are no more secondary dex files to check. |
| break; |
| } |
| |
| std::string error_msg; |
| uint32_t expected_secondary_checksum = 0; |
| if (DexFile::GetChecksum(secondary_dex_location.c_str(), |
| &expected_secondary_checksum, &error_msg)) { |
| uint32_t actual_secondary_checksum |
| = secondary_oat_dex_file->GetDexFileLocationChecksum(); |
| if (expected_secondary_checksum != actual_secondary_checksum) { |
| VLOG(oat) << "Dex checksum does not match for secondary dex: " |
| << secondary_dex_location |
| << ". Expected: " << expected_secondary_checksum |
| << ", Actual: " << actual_secondary_checksum; |
| return true; |
| } |
| } else { |
| // If we can't get the checksum for the secondary location, we assume |
| // the dex checksum is up to date for this and all other secondary dex |
| // files. |
| break; |
| } |
| } |
| |
| CompilerFilter::Filter current_compiler_filter = file.GetCompilerFilter(); |
| VLOG(oat) << "Compiler filter for " << file.GetLocation() << " is " << current_compiler_filter; |
| |
| // Verify the image checksum |
| if (CompilerFilter::DependsOnImageChecksum(current_compiler_filter)) { |
| const ImageInfo* image_info = GetImageInfo(); |
| if (image_info == nullptr) { |
| VLOG(oat) << "No image for oat image checksum to match against."; |
| |
| if (HasOriginalDexFiles()) { |
| return true; |
| } |
| |
| // If there is no original dex file to fall back to, grudgingly accept |
| // the oat file. This could technically lead to crashes, but there's no |
| // way we could find a better oat file to use for this dex location, |
| // and it's better than being stuck in a boot loop with no way out. |
| // The problem will hopefully resolve itself the next time the runtime |
| // starts up. |
| LOG(WARNING) << "Dex location " << dex_location_ << " does not seem to include dex file. " |
| << "Allow oat file use. This is potentially dangerous."; |
| } else if (file.GetOatHeader().GetImageFileLocationOatChecksum() |
| != GetCombinedImageChecksum()) { |
| VLOG(oat) << "Oat image checksum does not match image checksum."; |
| return true; |
| } |
| } else { |
| VLOG(oat) << "Image checksum test skipped for compiler filter " << current_compiler_filter; |
| } |
| |
| // Verify the profile hasn't changed recently. |
| // TODO: Move this check to OatFileCompilerFilterIsOkay? Nothing bad should |
| // happen if we use an oat file compiled with an out-of-date profile. |
| if (CompilerFilter::DependsOnProfile(current_compiler_filter)) { |
| if (profile_changed_) { |
| VLOG(oat) << "The profile has changed recently."; |
| return true; |
| } |
| } else { |
| VLOG(oat) << "Profile check skipped for compiler filter " << current_compiler_filter; |
| } |
| |
| // Everything looks good; the dex file is not out of date. |
| return false; |
| } |
| |
| bool OatFileAssistant::GivenOatFileNeedsRelocation(const OatFile& file) { |
| return GivenOatFileStatus(file) == kOatNeedsRelocation; |
| } |
| |
| bool OatFileAssistant::GivenOatFileIsUpToDate(const OatFile& file) { |
| if (GivenOatFileIsOutOfDate(file)) { |
| return false; |
| } |
| |
| CompilerFilter::Filter current_compiler_filter = file.GetCompilerFilter(); |
| |
| if (CompilerFilter::IsBytecodeCompilationEnabled(current_compiler_filter)) { |
| if (!file.IsPic()) { |
| const ImageInfo* image_info = GetImageInfo(); |
| if (image_info == nullptr) { |
| VLOG(oat) << "No image to check oat relocation against."; |
| return false; |
| } |
| |
| // Verify the oat_data_begin recorded for the image in the oat file matches |
| // the actual oat_data_begin for boot.oat in the image. |
| const OatHeader& oat_header = file.GetOatHeader(); |
| uintptr_t oat_data_begin = oat_header.GetImageFileLocationOatDataBegin(); |
| if (oat_data_begin != image_info->oat_data_begin) { |
| VLOG(oat) << file.GetLocation() << |
| ": Oat file image oat_data_begin (" << oat_data_begin << ")" |
| << " does not match actual image oat_data_begin (" |
| << image_info->oat_data_begin << ")"; |
| return false; |
| } |
| |
| // Verify the oat_patch_delta recorded for the image in the oat file matches |
| // the actual oat_patch_delta for the image. |
| int32_t oat_patch_delta = oat_header.GetImagePatchDelta(); |
| if (oat_patch_delta != image_info->patch_delta) { |
| VLOG(oat) << file.GetLocation() << |
| ": Oat file image patch delta (" << oat_patch_delta << ")" |
| << " does not match actual image patch delta (" |
| << image_info->patch_delta << ")"; |
| return false; |
| } |
| } else { |
| // Oat files compiled in PIC mode do not require relocation. |
| VLOG(oat) << "Oat relocation test skipped for PIC oat file"; |
| } |
| } else { |
| VLOG(oat) << "Oat relocation test skipped for compiler filter " << current_compiler_filter; |
| } |
| return true; |
| } |
| |
| OatFileAssistant::ResultOfAttemptToUpdate |
| OatFileAssistant::RelocateOatFile(const std::string* input_file, std::string* error_msg) { |
| CHECK(error_msg != nullptr); |
| |
| if (input_file == nullptr) { |
| *error_msg = "Patching of oat file for dex location " + dex_location_ |
| + " not attempted because the input file name could not be determined."; |
| return kUpdateNotAttempted; |
| } |
| const std::string& input_file_name = *input_file; |
| |
| if (OatFileName() == nullptr) { |
| *error_msg = "Patching of oat file for dex location " + dex_location_ |
| + " not attempted because the oat file name could not be determined."; |
| return kUpdateNotAttempted; |
| } |
| const std::string& oat_file_name = *OatFileName(); |
| |
| const ImageInfo* image_info = GetImageInfo(); |
| Runtime* runtime = Runtime::Current(); |
| if (image_info == nullptr) { |
| *error_msg = "Patching of oat file " + oat_file_name |
| + " not attempted because no image location was found."; |
| return kUpdateNotAttempted; |
| } |
| |
| if (!runtime->IsDex2OatEnabled()) { |
| *error_msg = "Patching of oat file " + oat_file_name |
| + " not attempted because dex2oat is disabled"; |
| return kUpdateNotAttempted; |
| } |
| |
| std::vector<std::string> argv; |
| argv.push_back(runtime->GetPatchoatExecutable()); |
| argv.push_back("--instruction-set=" + std::string(GetInstructionSetString(isa_))); |
| argv.push_back("--input-oat-file=" + input_file_name); |
| argv.push_back("--output-oat-file=" + oat_file_name); |
| argv.push_back("--patched-image-location=" + image_info->location); |
| |
| std::string command_line(Join(argv, ' ')); |
| if (!Exec(argv, error_msg)) { |
| // Manually delete the file. This ensures there is no garbage left over if |
| // the process unexpectedly died. |
| unlink(oat_file_name.c_str()); |
| return kUpdateFailed; |
| } |
| |
| // Mark that the oat file has changed and we should try to reload. |
| ClearOatFileCache(); |
| return kUpdateSucceeded; |
| } |
| |
| OatFileAssistant::ResultOfAttemptToUpdate |
| OatFileAssistant::GenerateOatFile(std::string* error_msg) { |
| CHECK(error_msg != nullptr); |
| |
| Runtime* runtime = Runtime::Current(); |
| if (!runtime->IsDex2OatEnabled()) { |
| *error_msg = "Generation of oat file for dex location " + dex_location_ |
| + " not attempted because dex2oat is disabled."; |
| return kUpdateNotAttempted; |
| } |
| |
| if (OatFileName() == nullptr) { |
| *error_msg = "Generation of oat file for dex location " + dex_location_ |
| + " not attempted because the oat file name could not be determined."; |
| return kUpdateNotAttempted; |
| } |
| const std::string& oat_file_name = *OatFileName(); |
| |
| // dex2oat ignores missing dex files and doesn't report an error. |
| // Check explicitly here so we can detect the error properly. |
| // TODO: Why does dex2oat behave that way? |
| if (!OS::FileExists(dex_location_.c_str())) { |
| *error_msg = "Dex location " + dex_location_ + " does not exists."; |
| return kUpdateNotAttempted; |
| } |
| |
| std::unique_ptr<File> oat_file; |
| oat_file.reset(OS::CreateEmptyFile(oat_file_name.c_str())); |
| if (oat_file.get() == nullptr) { |
| *error_msg = "Generation of oat file " + oat_file_name |
| + " not attempted because the oat file could not be created."; |
| return kUpdateNotAttempted; |
| } |
| |
| if (fchmod(oat_file->Fd(), 0644) != 0) { |
| *error_msg = "Generation of oat file " + oat_file_name |
| + " not attempted because the oat file could not be made world readable."; |
| oat_file->Erase(); |
| return kUpdateNotAttempted; |
| } |
| |
| std::vector<std::string> args; |
| args.push_back("--dex-file=" + dex_location_); |
| args.push_back("--oat-fd=" + std::to_string(oat_file->Fd())); |
| args.push_back("--oat-location=" + oat_file_name); |
| |
| if (!Dex2Oat(args, error_msg)) { |
| // Manually delete the file. This ensures there is no garbage left over if |
| // the process unexpectedly died. |
| oat_file->Erase(); |
| unlink(oat_file_name.c_str()); |
| return kUpdateFailed; |
| } |
| |
| if (oat_file->FlushCloseOrErase() != 0) { |
| *error_msg = "Unable to close oat file " + oat_file_name; |
| unlink(oat_file_name.c_str()); |
| return kUpdateFailed; |
| } |
| |
| // Mark that the oat file has changed and we should try to reload. |
| ClearOatFileCache(); |
| return kUpdateSucceeded; |
| } |
| |
| bool OatFileAssistant::Dex2Oat(const std::vector<std::string>& args, |
| std::string* error_msg) { |
| Runtime* runtime = Runtime::Current(); |
| std::string image_location = ImageLocation(); |
| if (image_location.empty()) { |
| *error_msg = "No image location found for Dex2Oat."; |
| return false; |
| } |
| |
| std::vector<std::string> argv; |
| argv.push_back(runtime->GetCompilerExecutable()); |
| argv.push_back("--runtime-arg"); |
| argv.push_back("-classpath"); |
| argv.push_back("--runtime-arg"); |
| std::string class_path = runtime->GetClassPathString(); |
| if (class_path == "") { |
| class_path = OatFile::kSpecialSharedLibrary; |
| } |
| argv.push_back(class_path); |
| if (runtime->IsDebuggable()) { |
| argv.push_back("--debuggable"); |
| } |
| runtime->AddCurrentRuntimeFeaturesAsDex2OatArguments(&argv); |
| |
| if (!runtime->IsVerificationEnabled()) { |
| argv.push_back("--compiler-filter=verify-none"); |
| } |
| |
| if (runtime->MustRelocateIfPossible()) { |
| argv.push_back("--runtime-arg"); |
| argv.push_back("-Xrelocate"); |
| } else { |
| argv.push_back("--runtime-arg"); |
| argv.push_back("-Xnorelocate"); |
| } |
| |
| if (!kIsTargetBuild) { |
| argv.push_back("--host"); |
| } |
| |
| argv.push_back("--boot-image=" + image_location); |
| |
| std::vector<std::string> compiler_options = runtime->GetCompilerOptions(); |
| argv.insert(argv.end(), compiler_options.begin(), compiler_options.end()); |
| |
| argv.insert(argv.end(), args.begin(), args.end()); |
| |
| std::string command_line(Join(argv, ' ')); |
| return Exec(argv, error_msg); |
| } |
| |
| bool OatFileAssistant::DexFilenameToOdexFilename(const std::string& location, |
| InstructionSet isa, std::string* odex_filename, std::string* error_msg) { |
| CHECK(odex_filename != nullptr); |
| CHECK(error_msg != nullptr); |
| |
| // The odex file name is formed by replacing the dex_location extension with |
| // .odex and inserting an oat/<isa> directory. For example: |
| // location = /foo/bar/baz.jar |
| // odex_location = /foo/bar/oat/<isa>/baz.odex |
| |
| // Find the directory portion of the dex location and add the oat/<isa> |
| // directory. |
| size_t pos = location.rfind('/'); |
| if (pos == std::string::npos) { |
| *error_msg = "Dex location " + location + " has no directory."; |
| return false; |
| } |
| std::string dir = location.substr(0, pos+1); |
| dir += "oat/" + std::string(GetInstructionSetString(isa)); |
| |
| // Find the file portion of the dex location. |
| std::string file; |
| if (pos == std::string::npos) { |
| file = location; |
| } else { |
| file = location.substr(pos+1); |
| } |
| |
| // Get the base part of the file without the extension. |
| pos = file.rfind('.'); |
| if (pos == std::string::npos) { |
| *error_msg = "Dex location " + location + " has no extension."; |
| return false; |
| } |
| std::string base = file.substr(0, pos); |
| |
| *odex_filename = dir + "/" + base + ".odex"; |
| return true; |
| } |
| |
| std::string OatFileAssistant::DalvikCacheDirectory() { |
| // Note: We don't cache this, because it will only be called once by |
| // OatFileName. |
| |
| // TODO: The work done in GetDalvikCache is overkill for what we need. |
| // Ideally a new API for getting the DalvikCacheDirectory the way we want |
| // (without existence testing, creation, or death) is provided with the rest |
| // of the GetDalvikCache family of functions. Until such an API is in place, |
| // we use GetDalvikCache to avoid duplicating the logic for determining the |
| // dalvik cache directory. |
| std::string result; |
| bool have_android_data; |
| bool dalvik_cache_exists; |
| bool is_global_cache; |
| GetDalvikCache("", false, &result, &have_android_data, &dalvik_cache_exists, &is_global_cache); |
| return result; |
| } |
| |
| std::string OatFileAssistant::ImageLocation() { |
| Runtime* runtime = Runtime::Current(); |
| const std::vector<gc::space::ImageSpace*>& image_spaces = |
| runtime->GetHeap()->GetBootImageSpaces(); |
| if (image_spaces.empty()) { |
| return ""; |
| } |
| return image_spaces[0]->GetImageLocation(); |
| } |
| |
| const uint32_t* OatFileAssistant::GetRequiredDexChecksum() { |
| if (!required_dex_checksum_attempted_) { |
| required_dex_checksum_attempted_ = true; |
| required_dex_checksum_found_ = false; |
| std::string error_msg; |
| if (DexFile::GetChecksum(dex_location_.c_str(), &cached_required_dex_checksum_, &error_msg)) { |
| required_dex_checksum_found_ = true; |
| has_original_dex_files_ = true; |
| } else { |
| // This can happen if the original dex file has been stripped from the |
| // apk. |
| VLOG(oat) << "OatFileAssistant: " << error_msg; |
| has_original_dex_files_ = false; |
| |
| // Get the checksum from the odex if we can. |
| const OatFile* odex_file = GetOdexFile(); |
| if (odex_file != nullptr) { |
| const OatFile::OatDexFile* odex_dex_file = odex_file->GetOatDexFile( |
| dex_location_.c_str(), nullptr, false); |
| if (odex_dex_file != nullptr) { |
| cached_required_dex_checksum_ = odex_dex_file->GetDexFileLocationChecksum(); |
| required_dex_checksum_found_ = true; |
| } |
| } |
| } |
| } |
| return required_dex_checksum_found_ ? &cached_required_dex_checksum_ : nullptr; |
| } |
| |
| const OatFile* OatFileAssistant::GetOdexFile() { |
| CHECK(!oat_file_released_) << "OdexFile called after oat file released."; |
| if (!odex_file_load_attempted_) { |
| odex_file_load_attempted_ = true; |
| if (OdexFileName() != nullptr) { |
| const std::string& odex_file_name = *OdexFileName(); |
| std::string error_msg; |
| cached_odex_file_.reset(OatFile::Open(odex_file_name.c_str(), |
| odex_file_name.c_str(), |
| nullptr, |
| nullptr, |
| load_executable_, |
| /*low_4gb*/false, |
| dex_location_.c_str(), |
| &error_msg)); |
| if (cached_odex_file_.get() == nullptr) { |
| VLOG(oat) << "OatFileAssistant test for existing pre-compiled oat file " |
| << odex_file_name << ": " << error_msg; |
| } |
| } |
| } |
| return cached_odex_file_.get(); |
| } |
| |
| bool OatFileAssistant::OdexFileIsExecutable() { |
| const OatFile* odex_file = GetOdexFile(); |
| return (odex_file != nullptr && odex_file->IsExecutable()); |
| } |
| |
| bool OatFileAssistant::OdexFileHasPatchInfo() { |
| const OatFile* odex_file = GetOdexFile(); |
| return (odex_file != nullptr && odex_file->HasPatchInfo()); |
| } |
| |
| void OatFileAssistant::ClearOdexFileCache() { |
| odex_file_load_attempted_ = false; |
| cached_odex_file_.reset(); |
| odex_file_is_out_of_date_attempted_ = false; |
| odex_file_is_up_to_date_attempted_ = false; |
| } |
| |
| const OatFile* OatFileAssistant::GetOatFile() { |
| CHECK(!oat_file_released_) << "OatFile called after oat file released."; |
| if (!oat_file_load_attempted_) { |
| oat_file_load_attempted_ = true; |
| if (OatFileName() != nullptr) { |
| const std::string& oat_file_name = *OatFileName(); |
| std::string error_msg; |
| cached_oat_file_.reset(OatFile::Open(oat_file_name.c_str(), |
| oat_file_name.c_str(), |
| nullptr, |
| nullptr, |
| load_executable_, |
| /*low_4gb*/false, |
| dex_location_.c_str(), |
| &error_msg)); |
| if (cached_oat_file_.get() == nullptr) { |
| VLOG(oat) << "OatFileAssistant test for existing oat file " |
| << oat_file_name << ": " << error_msg; |
| } |
| } |
| } |
| return cached_oat_file_.get(); |
| } |
| |
| bool OatFileAssistant::OatFileIsExecutable() { |
| const OatFile* oat_file = GetOatFile(); |
| return (oat_file != nullptr && oat_file->IsExecutable()); |
| } |
| |
| bool OatFileAssistant::OatFileHasPatchInfo() { |
| const OatFile* oat_file = GetOatFile(); |
| return (oat_file != nullptr && oat_file->HasPatchInfo()); |
| } |
| |
| void OatFileAssistant::ClearOatFileCache() { |
| oat_file_load_attempted_ = false; |
| cached_oat_file_.reset(); |
| oat_file_is_out_of_date_attempted_ = false; |
| oat_file_is_up_to_date_attempted_ = false; |
| } |
| |
| const OatFileAssistant::ImageInfo* OatFileAssistant::GetImageInfo() { |
| if (!image_info_load_attempted_) { |
| image_info_load_attempted_ = true; |
| |
| Runtime* runtime = Runtime::Current(); |
| std::vector<gc::space::ImageSpace*> image_spaces = runtime->GetHeap()->GetBootImageSpaces(); |
| if (!image_spaces.empty()) { |
| cached_image_info_.location = image_spaces[0]->GetImageLocation(); |
| |
| if (isa_ == kRuntimeISA) { |
| const ImageHeader& image_header = image_spaces[0]->GetImageHeader(); |
| cached_image_info_.oat_checksum = image_header.GetOatChecksum(); |
| cached_image_info_.oat_data_begin = reinterpret_cast<uintptr_t>( |
| image_header.GetOatDataBegin()); |
| cached_image_info_.patch_delta = image_header.GetPatchDelta(); |
| } else { |
| std::unique_ptr<ImageHeader> image_header( |
| gc::space::ImageSpace::ReadImageHeaderOrDie(cached_image_info_.location.c_str(), isa_)); |
| cached_image_info_.oat_checksum = image_header->GetOatChecksum(); |
| cached_image_info_.oat_data_begin = reinterpret_cast<uintptr_t>( |
| image_header->GetOatDataBegin()); |
| cached_image_info_.patch_delta = image_header->GetPatchDelta(); |
| } |
| } |
| image_info_load_succeeded_ = (!image_spaces.empty()); |
| |
| combined_image_checksum_ = CalculateCombinedImageChecksum(isa_); |
| } |
| return image_info_load_succeeded_ ? &cached_image_info_ : nullptr; |
| } |
| |
| // TODO: Use something better than xor. |
| uint32_t OatFileAssistant::CalculateCombinedImageChecksum(InstructionSet isa) { |
| uint32_t checksum = 0; |
| std::vector<gc::space::ImageSpace*> image_spaces = |
| Runtime::Current()->GetHeap()->GetBootImageSpaces(); |
| if (isa == kRuntimeISA) { |
| for (gc::space::ImageSpace* image_space : image_spaces) { |
| checksum ^= image_space->GetImageHeader().GetOatChecksum(); |
| } |
| } else { |
| for (gc::space::ImageSpace* image_space : image_spaces) { |
| std::string location = image_space->GetImageLocation(); |
| std::unique_ptr<ImageHeader> image_header( |
| gc::space::ImageSpace::ReadImageHeaderOrDie(location.c_str(), isa)); |
| checksum ^= image_header->GetOatChecksum(); |
| } |
| } |
| return checksum; |
| } |
| |
| uint32_t OatFileAssistant::GetCombinedImageChecksum() { |
| if (!image_info_load_attempted_) { |
| GetImageInfo(); |
| } |
| return combined_image_checksum_; |
| } |
| |
| gc::space::ImageSpace* OatFileAssistant::OpenImageSpace(const OatFile* oat_file) { |
| DCHECK(oat_file != nullptr); |
| std::string art_file = ArtFileName(oat_file); |
| if (art_file.empty()) { |
| return nullptr; |
| } |
| std::string error_msg; |
| ScopedObjectAccess soa(Thread::Current()); |
| gc::space::ImageSpace* ret = gc::space::ImageSpace::CreateFromAppImage(art_file.c_str(), |
| oat_file, |
| &error_msg); |
| if (ret == nullptr && (VLOG_IS_ON(image) || OS::FileExists(art_file.c_str()))) { |
| LOG(INFO) << "Failed to open app image " << art_file.c_str() << " " << error_msg; |
| } |
| return ret; |
| } |
| |
| } // namespace art |
| |