| #!/bin/bash |
| # |
| # Copyright (C) 2007 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Set up prog to be the path of this script, including following symlinks, |
| # and set up progdir to be the fully-qualified pathname of its directory. |
| prog="$0" |
| args="$@" |
| while [ -h "${prog}" ]; do |
| newProg=`/bin/ls -ld "${prog}"` |
| newProg=`expr "${newProg}" : ".* -> \(.*\)$"` |
| if expr "x${newProg}" : 'x/' >/dev/null; then |
| prog="${newProg}" |
| else |
| progdir=`dirname "${prog}"` |
| prog="${progdir}/${newProg}" |
| fi |
| done |
| oldwd=`pwd` |
| progdir=`dirname "${prog}"` |
| cd "${progdir}" |
| progdir=`pwd` |
| prog="${progdir}"/`basename "${prog}"` |
| test_dir="test-$$" |
| if [ -z "$TMPDIR" ]; then |
| tmp_dir="/tmp/$USER/${test_dir}" |
| else |
| tmp_dir="${TMPDIR}/$USER/${test_dir}" |
| fi |
| checker="${progdir}/../tools/checker/checker.py" |
| |
| export JAVA="java" |
| export JAVAC="javac -g" |
| export RUN="${progdir}/etc/run-test-jar" |
| export DEX_LOCATION=/data/run-test/${test_dir} |
| export NEED_DEX="true" |
| |
| # If dx was not set by the environment variable, assume it is in the path. |
| if [ -z "$DX" ]; then |
| export DX="dx" |
| fi |
| |
| # If jasmin was not set by the environment variable, assume it is in the path. |
| if [ -z "$JASMIN" ]; then |
| export JASMIN="jasmin" |
| fi |
| |
| # If smali was not set by the environment variable, assume it is in the path. |
| if [ -z "$SMALI" ]; then |
| export SMALI="smali" |
| fi |
| |
| # If dexmerger was not set by the environment variable, assume it is in the path. |
| if [ -z "$DXMERGER" ]; then |
| export DXMERGER="dexmerger" |
| fi |
| |
| |
| info="info.txt" |
| build="build" |
| run="run" |
| expected="expected.txt" |
| check_cmd="check" |
| output="output.txt" |
| build_output="build-output.txt" |
| cfg_output="cfg-output.txt" |
| lib="libartd.so" |
| run_args="--quiet" |
| build_args="" |
| |
| debuggable="no" |
| prebuild_mode="yes" |
| target_mode="yes" |
| dev_mode="no" |
| update_mode="no" |
| debug_mode="no" |
| relocate="yes" |
| runtime="art" |
| usage="no" |
| build_only="no" |
| suffix64="" |
| trace="false" |
| basic_verify="false" |
| gc_verify="false" |
| gc_stress="false" |
| always_clean="no" |
| have_dex2oat="yes" |
| have_patchoat="yes" |
| have_image="yes" |
| image_suffix="" |
| pic_image_suffix="" |
| android_root="/system" |
| |
| while true; do |
| if [ "x$1" = "x--host" ]; then |
| target_mode="no" |
| DEX_LOCATION=$tmp_dir |
| run_args="${run_args} --host" |
| shift |
| elif [ "x$1" = "x--jvm" ]; then |
| target_mode="no" |
| runtime="jvm" |
| prebuild_mode="no" |
| NEED_DEX="false" |
| run_args="${run_args} --jvm" |
| shift |
| elif [ "x$1" = "x-O" ]; then |
| lib="libart.so" |
| shift |
| elif [ "x$1" = "x--dalvik" ]; then |
| lib="libdvm.so" |
| runtime="dalvik" |
| shift |
| elif [ "x$1" = "x--no-dex2oat" ]; then |
| have_dex2oat="no" |
| shift |
| elif [ "x$1" = "x--no-patchoat" ]; then |
| have_patchoat="no" |
| shift |
| elif [ "x$1" = "x--no-image" ]; then |
| have_image="no" |
| shift |
| elif [ "x$1" = "x--pic-image" ]; then |
| pic_image_suffix="-pic" |
| shift |
| elif [ "x$1" = "x--pic-test" ]; then |
| run_args="${run_args} --pic-test" |
| shift |
| elif [ "x$1" = "x--relocate" ]; then |
| relocate="yes" |
| shift |
| elif [ "x$1" = "x--no-relocate" ]; then |
| relocate="no" |
| shift |
| elif [ "x$1" = "x--prebuild" ]; then |
| run_args="${run_args} --prebuild" |
| prebuild_mode="yes" |
| shift; |
| elif [ "x$1" = "x--debuggable" ]; then |
| run_args="${run_args} -Xcompiler-option --debuggable" |
| debuggable="yes" |
| shift; |
| elif [ "x$1" = "x--no-prebuild" ]; then |
| run_args="${run_args} --no-prebuild" |
| prebuild_mode="no" |
| shift; |
| elif [ "x$1" = "x--gcverify" ]; then |
| basic_verify="true" |
| gc_verify="true" |
| shift |
| elif [ "x$1" = "x--gcstress" ]; then |
| basic_verify="true" |
| gc_stress="true" |
| shift |
| elif [ "x$1" = "x--image" ]; then |
| shift |
| image="$1" |
| run_args="${run_args} --image $image" |
| shift |
| elif [ "x$1" = "x-Xcompiler-option" ]; then |
| shift |
| option="$1" |
| run_args="${run_args} -Xcompiler-option $option" |
| shift |
| elif [ "x$1" = "x--runtime-option" ]; then |
| shift |
| option="$1" |
| run_args="${run_args} --runtime-option $option" |
| shift |
| elif [ "x$1" = "x--gdb-arg" ]; then |
| shift |
| gdb_arg="$1" |
| run_args="${run_args} --gdb-arg $gdb_arg" |
| shift |
| elif [ "x$1" = "x--debug" ]; then |
| run_args="${run_args} --debug" |
| shift |
| elif [ "x$1" = "x--gdb" ]; then |
| run_args="${run_args} --gdb" |
| dev_mode="yes" |
| shift |
| elif [ "x$1" = "x--zygote" ]; then |
| run_args="${run_args} --zygote" |
| shift |
| elif [ "x$1" = "x--interpreter" ]; then |
| run_args="${run_args} --interpreter" |
| image_suffix="-interpreter" |
| shift |
| elif [ "x$1" = "x--jit" ]; then |
| run_args="${run_args} --jit" |
| image_suffix="-interpreter" |
| shift |
| elif [ "x$1" = "x--optimizing" ]; then |
| run_args="${run_args} -Xcompiler-option --compiler-backend=Optimizing" |
| image_suffix="-optimizing" |
| shift |
| elif [ "x$1" = "x--quick" ]; then |
| run_args="${run_args} -Xcompiler-option --compiler-backend=Quick" |
| shift |
| elif [ "x$1" = "x--no-verify" ]; then |
| run_args="${run_args} --no-verify" |
| shift |
| elif [ "x$1" = "x--no-optimize" ]; then |
| run_args="${run_args} --no-optimize" |
| shift |
| elif [ "x$1" = "x--no-precise" ]; then |
| run_args="${run_args} --no-precise" |
| shift |
| elif [ "x$1" = "x--invoke-with" ]; then |
| shift |
| what="$1" |
| if [ "x$what" = "x" ]; then |
| echo "$0 missing argument to --invoke-with" 1>&2 |
| usage="yes" |
| break |
| fi |
| run_args="${run_args} --invoke-with ${what}" |
| shift |
| elif [ "x$1" = "x--dev" ]; then |
| run_args="${run_args} --dev" |
| dev_mode="yes" |
| shift |
| elif [ "x$1" = "x--build-only" ]; then |
| build_only="yes" |
| shift |
| elif [ "x$1" = "x--output-path" ]; then |
| shift |
| tmp_dir=$1 |
| if [ "x$tmp_dir" = "x" ]; then |
| echo "$0 missing argument to --output-path" 1>&2 |
| usage="yes" |
| break |
| fi |
| shift |
| elif [ "x$1" = "x--android-root" ]; then |
| shift |
| if [ "x$1" = "x" ]; then |
| echo "$0 missing argument to --android-root" 1>&2 |
| usage="yes" |
| break |
| fi |
| android_root="$1" |
| run_args="${run_args} --android-root $1" |
| shift |
| elif [ "x$1" = "x--update" ]; then |
| update_mode="yes" |
| shift |
| elif [ "x$1" = "x--help" ]; then |
| usage="yes" |
| shift |
| elif [ "x$1" = "x--64" ]; then |
| run_args="${run_args} --64" |
| suffix64="64" |
| shift |
| elif [ "x$1" = "x--trace" ]; then |
| trace="true" |
| shift |
| elif [ "x$1" = "x--always-clean" ]; then |
| always_clean="yes" |
| shift |
| elif [ "x$1" = "x--dex2oat-swap" ]; then |
| run_args="${run_args} --dex2oat-swap" |
| shift |
| elif expr "x$1" : "x--" >/dev/null 2>&1; then |
| echo "unknown $0 option: $1" 1>&2 |
| usage="yes" |
| break |
| else |
| break |
| fi |
| done |
| |
| # tmp_dir may be relative, resolve. |
| # |
| # Cannot use realpath, as it does not exist on Mac. |
| # Cannot us a simple "cd", as the path might not be created yet. |
| # Cannot use readlink -m, as it does not exist on Mac. |
| # Fallback to nuclear option: |
| noncanonical_tmp_dir=$tmp_dir |
| tmp_dir="`cd $oldwd ; python -c "import os; print os.path.realpath('$tmp_dir')"`" |
| mkdir -p $tmp_dir |
| |
| if [ "$basic_verify" = "true" ]; then |
| # Set HspaceCompactForOOMMinIntervalMs to zero to run hspace compaction for OOM more frequently in tests. |
| run_args="${run_args} --runtime-option -Xgc:preverify --runtime-option -Xgc:postverify --runtime-option -XX:HspaceCompactForOOMMinIntervalMs=0" |
| fi |
| if [ "$gc_verify" = "true" ]; then |
| run_args="${run_args} --runtime-option -Xgc:preverify_rosalloc --runtime-option -Xgc:postverify_rosalloc" |
| fi |
| if [ "$gc_stress" = "true" ]; then |
| run_args="${run_args} --runtime-option -Xgc:SS --runtime-option -Xms2m --runtime-option -Xmx2m" |
| fi |
| if [ "$trace" = "true" ]; then |
| run_args="${run_args} --runtime-option -Xmethod-trace --runtime-option -Xmethod-trace-file:${DEX_LOCATION}/trace.bin --runtime-option -Xmethod-trace-file-size:2000000" |
| fi |
| |
| # Most interesting target architecture variables are Makefile variables, not environment variables. |
| # Try to map the suffix64 flag and what we find in ${ANDROID_PRODUCT_OUT}/data/art-test to an architecture name. |
| function guess_arch_name() { |
| grep32bit=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | grep -E '^(arm|x86|mips)$'` |
| grep64bit=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | grep -E '^(arm64|x86_64|mips64)$'` |
| if [ "x${suffix64}" = "x64" ]; then |
| target_arch_name=${grep64bit} |
| else |
| target_arch_name=${grep32bit} |
| fi |
| } |
| |
| if [ "$target_mode" = "no" ]; then |
| if [ "$runtime" = "jvm" ]; then |
| if [ "$prebuild_mode" = "yes" ]; then |
| echo "--prebuild with --jvm is unsupported"; |
| exit 1; |
| fi |
| fi |
| fi |
| |
| if [ "$have_patchoat" = "no" ]; then |
| run_args="${run_args} --no-patchoat" |
| fi |
| |
| if [ "$have_dex2oat" = "no" ]; then |
| run_args="${run_args} --no-dex2oat" |
| fi |
| |
| if [ ! "$runtime" = "jvm" ]; then |
| run_args="${run_args} --lib $lib" |
| fi |
| |
| if [ "$runtime" = "dalvik" ]; then |
| if [ "$target_mode" = "no" ]; then |
| framework="${ANDROID_PRODUCT_OUT}/system/framework" |
| bpath="${framework}/core.jar:${framework}/conscrypt.jar:${framework}/okhttp.jar:${framework}/core-junit.jar:${framework}/bouncycastle.jar:${framework}/ext.jar" |
| run_args="${run_args} --boot -Xbootclasspath:${bpath}" |
| else |
| true # defaults to using target BOOTCLASSPATH |
| fi |
| elif [ "$runtime" = "art" ]; then |
| if [ "$target_mode" = "no" ]; then |
| # ANDROID_BUILD_TOP and ANDROID_HOST_OUT are not set in a build environment. |
| if [ -z "$ANDROID_BUILD_TOP" ]; then |
| export ANDROID_BUILD_TOP=$oldwd |
| fi |
| if [ -z "$ANDROID_HOST_OUT" ]; then |
| export ANDROID_HOST_OUT=$ANDROID_BUILD_TOP/out/host/linux-x86 |
| fi |
| run_args="${run_args} --boot ${ANDROID_HOST_OUT}/framework/core${image_suffix}${pic_image_suffix}.art" |
| run_args="${run_args} --runtime-option -Djava.library.path=${ANDROID_HOST_OUT}/lib${suffix64}" |
| else |
| guess_arch_name |
| run_args="${run_args} --runtime-option -Djava.library.path=/data/art-test/${target_arch_name}" |
| run_args="${run_args} --boot /data/art-test/core${image_suffix}${pic_image_suffix}.art" |
| fi |
| if [ "$relocate" = "yes" ]; then |
| run_args="${run_args} --relocate" |
| else |
| run_args="${run_args} --no-relocate" |
| fi |
| fi |
| |
| if [ "$have_image" = "no" ]; then |
| if [ "$runtime" != "art" ]; then |
| echo "--no-image is only supported on the art runtime" |
| exit 1 |
| fi |
| if [ "$target_mode" = "no" ]; then |
| framework="${ANDROID_HOST_OUT}/framework" |
| bpath_suffix="-hostdex" |
| else |
| framework="${android_root}/framework" |
| bpath_suffix="" |
| fi |
| # TODO If the target was compiled WITH_DEXPREOPT=true then these tests will |
| # fail since these jar files will be stripped. |
| bpath="${framework}/core-libart${bpath_suffix}.jar" |
| bpath="${bpath}:${framework}/conscrypt${bpath_suffix}.jar" |
| bpath="${bpath}:${framework}/okhttp${bpath_suffix}.jar" |
| bpath="${bpath}:${framework}/core-junit${bpath_suffix}.jar" |
| bpath="${bpath}:${framework}/bouncycastle${bpath_suffix}.jar" |
| # Pass down the bootclasspath |
| run_args="${run_args} --runtime-option -Xbootclasspath:${bpath}" |
| run_args="${run_args} --no-image" |
| fi |
| |
| if [ "$dev_mode" = "yes" -a "$update_mode" = "yes" ]; then |
| echo "--dev and --update are mutually exclusive" 1>&2 |
| usage="yes" |
| fi |
| |
| if [ "$usage" = "no" ]; then |
| if [ "x$1" = "x" -o "x$1" = "x-" ]; then |
| test_dir=`basename "$oldwd"` |
| else |
| test_dir="$1" |
| fi |
| |
| if [ '!' -d "$test_dir" ]; then |
| td2=`echo ${test_dir}-*` |
| if [ '!' -d "$td2" ]; then |
| echo "${test_dir}: no such test directory" 1>&2 |
| usage="yes" |
| fi |
| test_dir="$td2" |
| fi |
| # Shift to get rid of the test name argument. The rest of the arguments |
| # will get passed to the test run. |
| shift |
| fi |
| |
| if [ "$usage" = "yes" ]; then |
| prog=`basename $prog` |
| ( |
| echo "usage:" |
| echo " $prog --help Print this message." |
| echo " $prog [options] [test-name] Run test normally." |
| echo " $prog --dev [options] [test-name] Development mode" \ |
| "(dumps to stdout)." |
| echo " $prog --update [options] [test-name] Update mode" \ |
| "(replaces expected.txt)." |
| echo ' Omitting the test name or specifying "-" will use the' \ |
| "current directory." |
| echo " Runtime Options:" |
| echo " -O Run non-debug rather than debug build (off by default)." |
| echo " -Xcompiler-option Pass an option to the compiler." |
| echo " --runtime-option Pass an option to the runtime." |
| echo " --debug Wait for a debugger to attach." |
| echo " --debuggable Whether to compile Java code for a debugger." |
| echo " --gdb Run under gdb; incompatible with some tests." |
| echo " --build-only Build test files only (off by default)." |
| echo " --interpreter Enable interpreter only mode (off by default)." |
| echo " --jit Enable jit (off by default)." |
| echo " --optimizing Enable optimizing compiler (default)." |
| echo " --quick Use Quick compiler (off by default)." |
| echo " --no-verify Turn off verification (on by default)." |
| echo " --no-optimize Turn off optimization (on by default)." |
| echo " --no-precise Turn off precise GC (on by default)." |
| echo " --zygote Spawn the process from the Zygote." \ |
| "If used, then the" |
| echo " other runtime options are ignored." |
| echo " --no-dex2oat Run as though dex2oat was failing." |
| echo " --no-patchoat Run as though patchoat was failing." |
| echo " --prebuild Run dex2oat on the files before starting test. (default)" |
| echo " --no-prebuild Do not run dex2oat on the files before starting" |
| echo " the test." |
| echo " --relocate Force the use of relocating in the test, making" |
| echo " the image and oat files be relocated to a random" |
| echo " address before running. (default)" |
| echo " --no-relocate Force the use of no relocating in the test" |
| echo " --host Use the host-mode virtual machine." |
| echo " --invoke-with Pass --invoke-with option to runtime." |
| echo " --dalvik Use Dalvik (off by default)." |
| echo " --jvm Use a host-local RI virtual machine." |
| echo " --output-path [path] Location where to store the build" \ |
| "files." |
| echo " --64 Run the test in 64-bit mode" |
| echo " --trace Run with method tracing" |
| echo " --gcstress Run with gc stress testing" |
| echo " --gcverify Run with gc verification" |
| echo " --always-clean Delete the test files even if the test fails." |
| echo " --android-root [path] The path on target for the android root. (/system by default)." |
| echo " --dex2oat-swap Use a dex2oat swap file." |
| ) 1>&2 |
| exit 1 |
| fi |
| |
| cd "$test_dir" |
| test_dir=`pwd` |
| |
| td_info="${test_dir}/${info}" |
| td_expected="${test_dir}/${expected}" |
| |
| if [ ! -r $td_info ]; then |
| echo "${test_dir}: missing file $td_info" 1>&2 |
| exit 1 |
| fi |
| |
| if [ ! -r $td_expected ]; then |
| echo "${test_dir}: missing file $td_expected" 1>&2 |
| exit 1 |
| fi |
| |
| # copy the test to a temp dir and run it |
| |
| echo "${test_dir}: building..." 1>&2 |
| |
| rm -rf "$tmp_dir" |
| cp -Rp "$test_dir" "$tmp_dir" |
| cd "$tmp_dir" |
| |
| if [ '!' -r "$build" ]; then |
| cp "${progdir}/etc/default-build" build |
| fi |
| |
| if [ '!' -r "$run" ]; then |
| cp "${progdir}/etc/default-run" run |
| fi |
| |
| if [ '!' -r "$check_cmd" ]; then |
| cp "${progdir}/etc/default-check" check |
| fi |
| |
| chmod 755 "$build" |
| chmod 755 "$run" |
| chmod 755 "$check_cmd" |
| |
| export TEST_NAME=`basename ${test_dir}` |
| |
| # Tests named '<number>-checker-*' will also have their CFGs verified with |
| # Checker when compiled with Optimizing on host. |
| if [[ "$TEST_NAME" =~ ^[0-9]+-checker- ]]; then |
| # Build Checker DEX files without dx's optimizations so the input to dex2oat |
| # better resembles the Java source. We always build the DEX the same way, even |
| # if Checker is not invoked and the test only runs the program. |
| build_args="${build_args} --dx-option --no-optimize" |
| |
| if [ "$runtime" = "art" -a "$image_suffix" = "-optimizing" -a "$target_mode" = "no" -a "$debuggable" = "no" ]; then |
| run_checker="yes" |
| run_args="${run_args} -Xcompiler-option --dump-cfg=$tmp_dir/$cfg_output \ |
| -Xcompiler-option -j1" |
| fi |
| fi |
| |
| # To cause tests to fail fast, limit the file sizes created by dx, dex2oat and ART output to 2MB. |
| file_size_limit=2048 |
| if echo "$test_dir" | grep 089; then |
| file_size_limit=5120 |
| elif echo "$test_dir" | grep 083; then |
| file_size_limit=5120 |
| fi |
| if ! ulimit -S "$file_size_limit"; then |
| echo "ulimit file size setting failed" |
| fi |
| |
| good="no" |
| good_build="yes" |
| good_run="yes" |
| if [ "$dev_mode" = "yes" ]; then |
| "./${build}" $build_args 2>&1 |
| build_exit="$?" |
| echo "build exit status: $build_exit" 1>&2 |
| if [ "$build_exit" = '0' ]; then |
| echo "${test_dir}: running..." 1>&2 |
| "./${run}" $run_args "$@" 2>&1 |
| run_exit="$?" |
| |
| if [ "$run_exit" = "0" ]; then |
| if [ "$run_checker" = "yes" ]; then |
| "$checker" "$cfg_output" "$tmp_dir" 2>&1 |
| checker_exit="$?" |
| if [ "$checker_exit" = "0" ]; then |
| good="yes" |
| fi |
| echo "checker exit status: $checker_exit" 1>&2 |
| else |
| good="yes" |
| fi |
| fi |
| echo "run exit status: $run_exit" 1>&2 |
| fi |
| elif [ "$update_mode" = "yes" ]; then |
| "./${build}" $build_args >"$build_output" 2>&1 |
| build_exit="$?" |
| if [ "$build_exit" = '0' ]; then |
| echo "${test_dir}: running..." 1>&2 |
| "./${run}" $run_args "$@" >"$output" 2>&1 |
| if [ "$run_checker" = "yes" ]; then |
| "$checker" -q "$cfg_output" "$tmp_dir" >> "$output" 2>&1 |
| fi |
| sed -e 's/[[:cntrl:]]$//g' < "$output" >"${td_expected}" |
| good="yes" |
| else |
| cat "$build_output" 1>&2 |
| echo "build exit status: $build_exit" 1>&2 |
| fi |
| elif [ "$build_only" = "yes" ]; then |
| good="yes" |
| "./${build}" $build_args >"$build_output" 2>&1 |
| build_exit="$?" |
| if [ "$build_exit" '!=' '0' ]; then |
| cp "$build_output" "$output" |
| echo "build exit status: $build_exit" >>"$output" |
| diff --strip-trailing-cr -q "$expected" "$output" >/dev/null |
| if [ "$?" '!=' "0" ]; then |
| good="no" |
| echo "BUILD FAILED For ${TEST_NAME}" |
| fi |
| fi |
| # Clean up extraneous files that are not used by tests. |
| find $tmp_dir -mindepth 1 ! -regex ".*/\(.*jar\|$output\|$expected\)" | xargs rm -rf |
| exit 0 |
| else |
| "./${build}" $build_args >"$build_output" 2>&1 |
| build_exit="$?" |
| if [ "$build_exit" = '0' ]; then |
| echo "${test_dir}: running..." 1>&2 |
| "./${run}" $run_args "$@" >"$output" 2>&1 |
| run_exit="$?" |
| if [ "$run_exit" != "0" ]; then |
| echo "run exit status: $run_exit" 1>&2 |
| good_run="no" |
| elif [ "$run_checker" = "yes" ]; then |
| "$checker" -q "$cfg_output" "$tmp_dir" >> "$output" 2>&1 |
| checker_exit="$?" |
| if [ "$checker_exit" != "0" ]; then |
| echo "checker exit status: $checker_exit" 1>&2 |
| good_run="no" |
| else |
| good_run="yes" |
| fi |
| else |
| good_run="yes" |
| fi |
| else |
| good_build="no" |
| cp "$build_output" "$output" |
| echo "Failed to build in tmpdir=${tmp_dir} from oldwd=${oldwd} and cwd=`pwd`" >> "$output" |
| echo "Non-canonical tmpdir was ${noncanonical_tmp_dir}" >> "$output" |
| echo "Args: ${args}" >> "$output" |
| echo "build exit status: $build_exit" >> "$output" |
| max_name_length=$(getconf NAME_MAX ${tmp_dir}) |
| echo "Max filename (NAME_MAX): ${max_name_length}" >> "$output" |
| max_path_length=$(getconf PATH_MAX ${tmp_dir}) |
| echo "Max pathlength (PATH_MAX): ${max_path_length}" >> "$output" |
| fi |
| ./$check_cmd "$expected" "$output" |
| if [ "$?" = "0" ]; then |
| if [ "$good_build" = "no" -o "$good_run" = "yes" ]; then |
| # output == expected |
| good="yes" |
| echo "${test_dir}: succeeded!" 1>&2 |
| fi |
| fi |
| fi |
| |
| ( |
| if [ "$good" != "yes" -a "$update_mode" != "yes" ]; then |
| echo "${test_dir}: FAILED!" |
| echo ' ' |
| echo '#################### info' |
| cat "${td_info}" | sed 's/^/# /g' |
| echo '#################### diffs' |
| diff --strip-trailing-cr -u "$expected" "$output" | tail -n 2000 |
| echo '####################' |
| echo ' ' |
| fi |
| |
| ) 1>&2 |
| |
| # Clean up test files. |
| if [ "$always_clean" = "yes" -o "$good" = "yes" ]; then |
| cd "$oldwd" |
| rm -rf "$tmp_dir" |
| if [ "$target_mode" = "yes" -a "$build_exit" = "0" ]; then |
| adb shell rm -rf $DEX_LOCATION |
| fi |
| if [ "$good" = "yes" ]; then |
| exit 0 |
| fi |
| fi |
| |
| |
| ( |
| if [ "$always_clean" = "yes" ]; then |
| echo "${TEST_NAME} files deleted from host " |
| if [ "$target_mode" == "yes" ]; then |
| echo "and from target" |
| fi |
| else |
| echo "${TEST_NAME} files left in ${tmp_dir} on host" |
| if [ "$target_mode" == "yes" ]; then |
| echo "and in ${DEX_LOCATION} on target" |
| fi |
| fi |
| |
| ) 1>&2 |
| |
| exit 1 |